Download - Drainline Brochure
Product Selector
D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 3
CONTENTS
PAGE
COVERS & FRAMES/ GULLY GRATES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
BESPOKE FABRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
CHANNEL DRAINAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
CAST IRON DRAINAGE SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
PLASTIC DRAINAGE PIPES & FITTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
PLASTIC DUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
SERVICES SUPPLY PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
SUSTAINABLE DRAINAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
GEOTEXTILE/ MEMBRANE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
SPECIALIST DRAINAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
POLLUTION CONTROL SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
RAINWATER/ GUTTERING SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
ADAPTORS/ COUPLINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
UNDER FLOOR HEATING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
STREET FURNITURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Welcome to Drainline Supplies easy to use all new Product Selector.
On 1st October 2005 Drainline Supplies opened the doors to its brand new depot atHayes, Middlesex. By increasing yard and warehouse space by some 300% we are able to
provide a one stop trade counter for all our products, with ample parking space.
Drainline Supplies offer a solution to all your above and below ground drainage relatedproblems and is able to supply many varied and exciting new products.
In addition to being the largest stockist of Ductile, Cast Iron and Steel Manhole Covers inthe south east, our steel fabrication department can manufacture Manhole Ladders and
Covers to any specification.
We are a main distributor of Aco Linear Drainage and both Polypipe Domestic and Civilsproducts, large quantities of which are held in stock. Drainline Supplies are able to offer
customers a complete take off service for these products.
Our commitment to meeting customer needs sees us stocking a complete range of StreetFurniture, together with all aspects of Cast Iron drainage.
Another range becoming popular is Under Floor Heating. Here again, Drainline Suppliescan offer technical advice and a take off service with many of the systems in stock.
At Drainline Supplies we take equal pride in servicing small individual orders as well aslarge contracts.
Our user friendly index will help you to speedily find whatever item you are looking foramong the varied products.
Being a responsible supplier, we take environmental issues seriously.Wherever possible,we stock only energy efficient or recycled products and we encourage all our suppliers to
use and provide environmentally friendly materials.
Standard Classification Loading CategoriesGroup 1 For use in pedestrian areas where motor vehicles have no access.
Minimum load class A15.
Group 2 For use in car parks & pedestrian areas where infrequent motorised vehicular access is likely.Minimum load class B125.
Group 3 For use in areas where slow moving heavy traffic have access & areas not exceeding 500mm from the kerbside.Minimum load class C250.
Group 4 For use in all carriageways & main roads where fast moving traffic is present.All units to be of a non-rock design. Minimum load class D400.Ultra product recommended.
Group 5 For use in areas where high wheel loads are apparent.Minimum load class E600. Ultra product recommended.
Group 6 For use in areas where extremely high wheel loads are evident.Load class F900.
BS EN124A15
BS EN124B125
BS EN124C250
BS EN124D400
BS EN124E600
BS EN124F900
4 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 5
DUCTILE IRON DUCTILE/ CAST IRON
Manhole Covers & Frames Estate Range
Estate Range
• CLASS D400 •
CodeNo.
BS EN124Class
ClearOpening mm
Base SizeOverall mm
Depthmm
ApproxWeight kg
DSD022 D400 450 x 450 600 x 600 100 60
DSD009 D400 600 x 450 750 x 600 100 81
DSD001 D400 600 x 600 800 x 800 100 90
DSD0016 D400 600 x 600 750 x 750 150 120
DSD001TW D400 600 x 600 750 x 750 100 90
DSD002 D400 675 x 675 835 x 835 100 102
DSD005 D400 750 x 600 900 x 750 100 121
DSD008 D400 750 x 750 900 x 900 100 150
DSD004 D400 900 x 600 1050 x 750 100 160
DSD023 D400 900 x 900 1050 x 1050 100 200
DSD003 D400 1220 x 675 1370 x 825 100 210
• Estate D400 ‘L’ Access Cover •
CodeNo.
BS EN124Class
ClearOpening mm
Base SizeOverall mm
Depthmm
ApproxWeight kg
DSD001L D400L 600 x 600 705 x 705 100 69
DSD0015L D400L 600 x 600 720 x 720 150 78
DSD002L D400L 675 x 675 780 x 780 100 102
DSD005L D400L 750 x 600 855 x 705 100 110
DSD045L D400L 900 x 600 1035 x 735 100 118
DSD003L D400L 1290 x 675 1440 x 830 100 212
• B125 Single Seal Solid Top EN124 •
CodeNo.
EN124Class
ClearOpening mm
Base SizeOverall mm
Depthmm
ApproxWeight kg
DSD010 B125 450 x 450 550 x 550 44 38
DSD011 B125 600 x 450 700 x 550 44 42
DSD012 B125 600 x 600 700 x 700 44 55
DSD007 B125 600 x 600 700 x 700 75 70
DSD027 B125 600 Dia 700 Dia 75 65
DSD013 B125 750 x 600 850 x 700 44 80
DSD026 B125 750 x 750 850 x 850 50 85
DSD014 B125 900 x 600 980 x 700 50 88
DSD019 B125 1220 x 675 1350 x 800 50 106
• A15 Single Seal Solid Top •
CodeNo. Class Clear
Opening mmBase Size
Overall mmDepthmm
ApproxWeight kg
DSC015 A15 450 x 450 561 x 565 35 30
DSC016 A15 600 x 450 960 x 565 35 38
DSC017 A15 600 x 600 710 x 710 35 47
DSC018 A15 750 x 600 800 x 650 40 80
DSC019 A15 900 x 600 1000 x 700 40 105
6 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 7
DUCTILE IRON DUCTILE IRON
Manhole Covers & Frames
CodeNo.
BS EN124Class
ClearOpening mm
Base SizeOverall mm
Depthmm
ApproxWeight kg
DSC020 A15 450 Dia 550 Dia 35 10
DSC021 B125 450 Dia 550 Dia 35 18
DSC020P A15 450 Dia 550 Dia 35 4
• Polypropylene Inspection Chamber Covers •
A15/ B125 Solid Top Single Seal
Now available with locking screws
CodeNo.
BS EN124Class
ClearOpening mm
Base SizeOverall mm
Depthmm
ApproxWeight kg
DSD002C C250 450 x 450 600 x 600 75 58
DSD021C C250 600 x 450 750 x 600 75 67
DSD001C C250 600 x 600 750 x 750 75 80
DSD025C C250 750 x 600 900 x 750 75 95
DSD024C C250 750 x 750 900 x 900 75 155
DSD004C C250 900 x 600 1055 x 760 75 125
DSD023C C250 900x 900 1050 x 1050 75 195
• CLASS E600 •
CodeNo.
BS EN124Class
ClearOpening mm
Base SizeOverall mm
Depthmm
ApproxWeight kg
DSD001E E600 600 x 600 765 x 765 150 190
DSD003E E600 1220 x 675 1385 x 885 150 416
DSD180E E600 1800 x 675 1980 x 885 150 571
Manhole Covers & Frames
• Class C250 Single Seal Solid Top •
8 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 9
DUCTILE IRON CAST IRON
Gully Grates & Frames Gully Grates & Frames
CodeNo.
BS EN124Class
ClearOpening mm
Base SizeOverall mm
Depthmm
ApproxWeight kg
WaterwayArea CM2
DSD015 D400 600 x 600 800 x 800 100mm 88 2000
DSD016 C250 436 x 436 587 x 527 75mm 40 1006
DSD017 D400 434 x 434 587 x 527 100mm 46 985
• Class C250/ D400 Double Triangular • Non-Rock •
CodeNo.
BS EN124Class
ClearOpening mm
Base SizeOverall mm
Depthmm
ApproxWeight kg
WaterwayArea CM2
DSD020 C250 380 x 310 430 x 370 75mm 32 765
DSD021 D400 430 x 370 590 x 525 100mm 41 980
• Class C250/ D400 Hinged Flat Straight Bar •
• Ductile Iron • Grade A • Double Tri/ Hinged •• Options: Badged/ Anti Theft Chain •
Manufactured to BS 5834 Part 2CodeNo.
ClearOpening mm
Base SizeOverall mm
Depth OfUnit mm
ApproxWeight kg
DSC037 145 x 120 195 x 165 75 5
DSC022 150 x 150 260 x 260 100 10
DSC023 225 x 225 335 x 335 100 20
DSC024 300 x 300 410 x 410 100 25
DSC025 380 x 230 530 x 380 100 40
Ductile Surface Boxes
CodeNo.
BS EN124Class
ClearOpening mm
Base SizeOverall mm
Depthmm
ApproxWeight kg
WaterwayArea CM2
DSC033 B125 229 x 229 320 x 320 70mm 18 218
DSC034 B125 300 x 300 380 x 380 70mm 22 406
• Class B125 Hinged & Dished •
10 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 11
DUCTILE/ CAST IRON LIGHT DUTY CAST IRON
Grates & Sealing PlatesKerb Weir
125 x 152 x 25mm
229 x 229 x 25mm
305 x 305 x 25mm
• Sealed Plates & Frames REF 106 •
152 Dia. x 9mm
229 x Dia. x 13mm
305 Dia. x 25mm
• Gully Grid Rnd. Flat Straight Bar REF D127 •
152 x 152 x 25mm
229 x 229 x 25mm
305 x 305 x 38mm
• Sq. Gully Grates & Frm. Hinged & Locking REF 173 •
152 x 152 x 13mm
229 x 229 x 13mm
305 x 305 x 13mm
• Gully Grid Square Dished REF 125 •
273 Dia. x 35mm
• Rnd. Gully Grt. & Frm. Hinged & Locking REF 172 •
152 Dia. x 9mm
• Gully Grid Square Dished REF 125 •
CodeNo.
BS EN124Class
ClearOpening mm
Base SizeOverall mm
Depthmm
ApproxWeight kg
DSC035 D400 474 x 350 556 x 405 150 75
• Class D400 • Anti-Theft Hinge • Half Battered or Splayed • • C/W Turnbuckle Locks • Options: Road Retaining Bar •
CodeNo.
ClearOpening mm
Base SizeOverall mm
Depthmm
ApproxWeight kg
DSC036 450 x 375 590 x 460 180 40
• Cast Iron Gully Chute Connector for fixing below grateor Kerb type Gully Unit • 150 Dia. Spigot Outlet •
12 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 13
GALVANISED MILD STEEL
British Telecom Approved Precinct Range
CodeNo.
ClearOpening mm
Base SizeOverall mm
Numberof Parts
Depth OfUnit mm
BT2 225 x 725 415 x 885 1 81
BT4 915 x 445 1075 x 605 3 81
BT5 610 x 610 770 x 770 2 81
BT6 1310 x 610 1470 x 770 4 81
BT10 2285 x 710 2445 x 870 6 81
BT11 1690 x 710 1850 x 870 5 81
BTJC1 960 x 610 1120 x 710 3 81
GALVANISED MILD STEEL
• British Telecom Approved Class B125 •
Manufactured to BS EN ISO 1461 (1999)
Block Pavior Covers
CodeNo.
ClearOpening mm
Base SizeOverall mm
Depth OfUnit mm
DSP001 450 x 450 550 x 550 100
DSP002 600 x 450 700 x 550 100
DSP003 600 x 600 700 x 700 100
DSP004 750 x 600 850 x 700 100
DSP005 750 x 750 850 x 850 100
DSP006 900 x 600 1000 x 700 100
DSP007 900 x 900 1000 x 1000 100
DSP008 1220 x 675 1320 x 775 100
• Suitable for 60 & 80mm Blocks Paviors •• Solid Plate • Options: 10/ 38 Tonne Loading •
Galvanised to BS 729
Internal Recessed Tray
CodeNo.
ClearOpening mm
Base SizeOverall mm
Depth OfUnit mm
DSRT001 450 x 450 550 x 550 59
DSRT002 600 x 450 700 x 550 59
DSRT003 600 x 600 700 x 700 59
DSRT004 750 x 600 850 x 700 59
DSRT005 750 x 750 850 x 850 59
DSRT006 900 x 600 1000 x 700 59
DSRT007 900 x 900 1000 x 1000 59
DSRT008 1220 x 675 1320 x 775 59
• Double Neoprene Seal • Recessed •• Locked with Screws •
Galvanised to BS 729
Loading GLVW: FACTA AAA: 10 Tonne,Brass/ Stainless Steel trim options available
CodeNo.
ClearOpening mm
Base SizeOverall mm
Depth OfUnit mm
DSAC001 450 x 450 470 x 470 38
DSAC002 600 x 450 620 x 470 38
DSAC003 600 x 600 620 x 620 38
DSAC004 750 x 600 770 x 620 38
DSAC 005 750 x 750 770 x 770 38
DSAC006 900 x 600 920 x 620 38
DSAC007 900 x 900 920 x 920 38
Solid Top Single Seal
• Options: Black Coated • Locking with Non-Ferrous Screws • Neoprene/ Metal Double Seal •
Galvanised to BS 729
Optional Loading GLVW: FACTA A: 1.5 Tonne,FACTA AA: 5 Tonne, FACTA AAA: 10 Tonne,FACTA B: 17/26/38 Tonne.
14 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 15
GALVANISED MILD STEEL CHANNEL DRAINAGE
ACO
• ACO Raindrain Plus Channel System •
Description Code
Channel c/w galvanised clip-in grates & vertical knockout 1m 210
Channel c/w galvanised clip-in grates & vertical knockout 500mm 220
Sump unit c/w clip-in grate & silt bucket 500mm 230
Closing end cap 260
Outlet end cap 280
Drain Union 110mm Dia. 820
• ACO HexDrain •
• Easy and quick to install
• Unique variable outlet position
• Friction-fit, anti-shunt grate
• Choice of black plastic, metallic effect plastic or galvanised steel grates
• Easy to cut 500mm lengths
• Full accessory pack aids installation
• Ideal for pedestrian and light vehicle traffic
Bespoke Fabrication
Bespoke Manhole Ladders manufactured to your own requirements/ specification.
A supply and fix service available on request.
Manufactured under an ISO90001Quality System
Bespoke fabrication to your own requirements/ specification.
• Manhole Ladders •
• Special Manhole Covers •
Manufactured under an ISO90001 Quality System
16 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 17
CHANNEL DRAINAGE CHANNEL DRAINAGE
ACO ACO
• ACO N100K Channel System •
Description Code
Channel with galvanised edge rail: sloping invert 1m N100K 1-30
Channel with galvanised edge rail: level invert 1m N100K 0.0 - 30.0
Sump Unit 500mm NK900
N100K end caps 306
N100K outlet end caps 108/109 - 308/309
• ACO ParkDrain® •
• One piece design means no separate grate
• Colour choice to match location
• Simple scheme layouts with level invert units
• Easy to achieve a watertight seal with sealing groove
• Lightweight for easy one man lift to comply with Health and Safety guidelines
• ACO Qmax® •
• Easy to fit - no additional space needed
• Simple construction
• Reliable operation - no moving parts
• Convenient access through access chamber
• Corrosion resistant 304 austenitic stainless steel
• ACO RoadDrain® •
• Strong, rigid one piece design - no separate grate
• Integral inlet resin concrete grate cannot be lost or stolen
• Inlet pattern mimics traditional cast iron grates
• Resin concrete construction maintains colour and offers excellent chemical resistance
• Lightweight for easy handling
18 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 19
CHANNEL DRAINAGE CHANNEL DRAINAGE
ACO ACO
• ACO S100 Channel System •
Description Code
S100 Channel 1m long: sloping invert S1 - S30
S100 Channel 1m long c/w 110 Dia: vertical knockout: level invert S01 - S030
S100 End caps S106/ 206/ 306
S100 Outlet end caps S108/ 208/ 308
S100 Inlet end caps S109/ 209/ 309
S100 Sump unit & bucket assembly 500mm long S900
S100 110 Dia Foul air trap/ roddable foul air trap 920/ 940
S100 160 Dia Foul air trap/ roddable foul air trap 922/ 950
S100 110 Dia / 160 Dia drain union 820/ 822
• ACO S100 Grates •
Description Code
Load Class F
Slotted heavy duty ductile iron 500mm long 772
‘Heelguard’ heavy duty ductile iron 500mm long 774
Intercept heavy duty ductile iron 500mm long 776
Solid cover ductile iron 500mm long 778
Gully/Junction Units are also available for this range.Please refer to our office for further information.
• ACO S150 / S200 / S300 Channel System •
Description Code
Please note:All units come complete with Class F Grates
S150 Channel 1m long c/w 160 Dia. vertical knockout 195mm invert 1501
S150 Channel 1m long c/w 160 Dia. vertical knockout 245mm invert 1502
S150 Channel 1m long c/w 160 Dia. vertical knockout 295mm invert 1503
S150 End cap Closing S150
S150 Outlet end caps to suit channel 1501/ 1502/ 1503 1131/ 1132/ 1133
S150 500mm long sump unit S150 Sump
S150 350mm high raising piece for sump unit S150 Rising piece
S150 PVC-U drain union 160mm Dia. / 200mm Dia. 822/ 823
S150 PVC-U foul air trap 160mm Dia. 922
S200 Channel 1m long c/w 160mm Dia. vertical knockout S200
S200 End cap Closing S200
S200 Outlet end cap 160mm Dia. Outlet S200
S200 PVC-U drain union 160mm Dia. 822
S300 Channel 1m long c/w 160mm Dia. vertical knockout S300
S300 End cap Closing S300
S300 Outlet end cap 200mm Dia. Outlet S300
S300 PVC-U drain union 160mm Dia. / 200mm Dia. 822/ 823
S300 PVC-U foul air trap 160mm Dia. 922
20 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 21
CHANNEL DRAINAGE CAST IRON SYSTEMS
ACO Brickslot/ Kerbdrain Timesaver Drainage
NOTE: Also available: side junction units, pre-formed knockout for vertical outlet,closing end caps, inlet/ outlet end caps, foul air traps, and drain unions.
• ACO Brickslot Channel Drainage •
Description Code
1m long channels with galvanised cover: sloping invert BRS 1 - 20
1m long channels with galvanised access cover: sloping invert BRSA 1 - 20
1m long channels with galvanised cover: level invert BRS 0.0 - 30.0
1m long access channels with galvanised cover: level insert BRSA 0.0 - 30.0
1m long shallow channels with galvanised cover: level invert BRS080H & BRS0100H
1m long shallow access channels with galv access cover: level invert BRSA080H & BRSA0100H
Sump unit 500mm long BRSA900
NOTE: Also available: mitre units, drop kerb units,closing end caps, inlet/ outlet end caps and gully units.
• ACO KerbDrain •
Description Code
500mm long kerb unit available as 480mm deep or 305mm deep KD480/ KD305
500mm long rodding access unit KD480A/ KD305A
1m long ACO junction channel KD480J / KD305J
500mm long gully top assembly (common to 480 & 305 systems) KDG
• ACO KerbDrain® •
• Stronger - 50% more impact resistance than standard HB1 kerbs
• Lighter and easier to lay
• One piece construction means no separate parts to bed and level
• Lighter and stronger than conventional concrete
• High capacity drainage performance
The Timesaver system was first launched in1973 for use on above ground soil and ventilating installations.
The system was recognised for its quality performance and was awarded the highlycoveted BSI Kitemark in 1982. Over the years,Saint-Gobain Pipelines has maintained itsprogramme of quality controls and is licencedunder BS EN ISO 9001:1994 quality assurancein recognition of its high standard ofproduction competence.
• Over 30 years proven performance, on the most prestigious commercial and public buildings throughout the UK and the world markets.
• Extensively used for refurbishment projects
• Unrivalled superior strength-fit and forget for below ground
• The preferred choice for underbuilding drainage and ground conditions which are unstable or require shallow trenches
Timesaver BS416 Soil Pipes & Fittings
• 50-150mm diameter pipes and fittings • Two-piece ductile iron couplings • Extensive range of access fittings • 'Compression fit' boss pipes • New strap on boss fitting • Ductile iron brackets
A full range of bends and fittings also available from stock.
Code No. Dia. Max O/Dia. Min L/Dia. Min Section Mtr Lengths Wt Per Mtr kg
Pipe - TD00
02675 100 119 99 7 3 18.7
02680 150 173 150 8 3 31.7
02682 225 256 225 10 3 60.0
• Pipes • Double Spigot BS 437 •
22 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 23
CAST IRON SYSTEMS CAST IRON SYSTEMS
Ensign Drainage Ensign Soil Pipe & Fittings
A full range of bends and fittings also available from stock.
Code No. CAD Ref Dia. O/Dia. L/Dia. Section Lengths Wt Per Mtr kg
Pipe - ED00
03309 0043 100 112 97.5 3 3 25.5
03310 0063 150 162 146.25 3.5 3 43.0
04077 0083 200 212 195 4 3 69.3
04423 0093 250 276.5 243.75 4.5 3 99.8
04424 00123 300 328.5 292.50 5 3 129.7
• Pipes • Double Spigot BS 877 •
• Cost Effective
• Noise Insulation
• Strong, Lightweight & Flexible System
• Fire and Heat Resistance
• No Expansion Joints
• Less Maintenance
• Less Fixings
• Resistance to Damage
• Less Embedment
• No Fire Collars
• Resistance to Extreme Temperatures
• Longevity
• Easy Access for Maintenance
• Economical Connections to Waste Pipes
• Superior Internal Coating For Pipes
Ensign offers individual cast iron drainage systems for above and below ground applications, and is the onlysystem tested and kitemark approved to the new product standard BS EN 877 in the UK.The above ground soil and waste system is red coated with the below ground system coated grey.Ensign meets the requirements of ISO6594 and is tested and approved by the British Board of Agrément.The Ensign system offers the specifier and installer a combination of material and installation savings whichhas significantly reduced the price differential between cast iron and other drainage materials, offering apremium system at a competitive rate cutting the "Price of Quality".
24 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 25
PIPES & FITTINGS DRAINAGE
PVCu Underground Drainage Twinwall Pipe (Drainage)
A full range of bends and fittings also available from stock.
O.D. Description Code No.
110mm 110mm S/S 6mtr lengths (BS4660) UG462
160mm 160mm S/S 6mtr lengths (BS4660) UG662
200mm 200mm S/S 6mtr lengths (BS5481) UG862
250mm 250mm S/S 6mtr lengths (BS5481) UG1069
315mm 315mm S/S 6mtr lengths (BS5481) UG1269
• 110mm / 315mm Sewer Pipe to BS4660 - EN 1401-1 •
Nom. Size ID (mm) OD (mm) Description Code
Unperforated Perforated
100mm 100mm 118mm 100mm Ridgidrain P/E 6mtr RD100x6U RD100x6PF
150mm 150mm 178mm 150mm Ridgidrain P/E 6mtr RD150x6U RD150x6PF
225mm 225mm 266mm 225mm Ridgidrain P/E 6mtr RD225x6U RD225x6PF
300mm 300mm 354mm 225mm Ridgidrain P/E 6mtr RD300x6U RD300x6PF
375mm 375mm 435mm 375mm Ridgidrain P/E 6mtr RD375x6U RD375x6PF
400mm 400mm 460mm 400mm Ridgidrain P/E 6mtr RD400x6U RD400x6PF
450mm 450mm 514mm 450mm Ridgidrain P/E 6mtr RD450x6U RD450x6PF
500mm 500mm 571mm 500mm Ridgidrain P/E 6mtr RD500x6U RD500x6PF
600mm 592mm 675mm 600mm Ridgidrain P/E 6mtr RD600x6U RD600x6PF
750mm 766mm 883mm 750mm Ridgidrain P/E 6mtr RD750x6U RD750x6PF
900mm 914mm 1040mm 900mm Ridgidrain P/E 6mtr RD900x6U RD900x6PF
1050mm 1065mm 1215mm 1050mm Ridgidrain P/E 6mtr RD1050x6U RD1050x6PF
• Twinwall Ridgidrain Pipe •
26 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 27
DRAINAGE DRAINAGE
Twinwall Fittings (Drainage) Twinwall Ridgigullies
* Bends available in 90, 45, 22.5 & 11.25 degrees. Please specify the angle requiredwhen ordering eg. BRD150X45.Other sizes available: 375mm, 400mm, 450mm, 500mm, 600mm,750mm, 900mm and 1050mm Dia.
• Twinwall Fittings to Suit Ridgidrain Pipe •• 100mm - 1050mm Dia •
ID (mm) OD (mm) Code
Seals Couplers Junctions Bend
100mm 118mm SRD100 CRD100 JRD100 BRD100X*
150mm 178mm SRD150 CRD150 JRD150 BRD150X*
225mm 266mm SRD225 CRD225 JRD225 BRD225X*
300mm 354mm SRD300 CRD300 JRD300 BRD300X*
• Twinwall Road/ Yard Gully •
Description Code
300mm Dia. X 600mm Deep Yard Gully RG300/600
450mm Dia. X 750mm Deep Road Gully RG450/750
450mm Dia. X 900mm Deep Road Gully RG450/900
Silt Bucket (to suit 300 x 600 Yard Gully) RGSB
Multi-Adaptor 150mm Dia. ARG Multi
28 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 29
DRAINAGE DUCT
Land Drainage PVCu Duct
• Land Drain Coils •
O.D Description Code
80mm 80mm Land Drain perforated (25,50 & 100 mtr coils) LD80X*
100mm 100mm Land Drain perforated (25,50 & 100 mtr coils) LD100X*
160mm 160mm Land Drain perforated (25 & 45mtr coils) LD160X*
60mm 60mm to 60mm diameter Land Drainage Y junction CDJ66
80mm x 100mm 80mm to 100mm diameter Land Drainage Y junction CDJ10M
160 x 60mm 160mm to 60mm diameter Land Drainage Multi-Junction CDJ160M
* When ordering please use code plus coil length required e.g. LD80X100.Other sizes of Land Drain available on request.
Available in 90, 45, 22.5 and 11.25 degrees.Please specify angle required when ordering.
Available as 90 degree (T) 45 degree (Y).Please specify angle required when ordering.
• 2" - 8" Couplers •
Dia. (inches) Dia. (mm) Code
2" 54mm Duct2AC
3" 88.9mm Duct3C
4" 114mm Duct4BC
6" 168mm Duct6BC
8" 200mm Duct8C
• 2" - 8" Bends •
Dia. (inches) Dia. (mm) Code
2" 54mm Duct2AX
3" 88.9mm Duct3X
4" 114mm Duct4BX
6" 168mm Duct6BX
8" 200mm Duct8X
• 2" - 8" Junctions •
Dia. (inches) Dia. (mm) Code
2" 54mm Duct2AJ
3" 88.9mm Duct3J
4" 114mm Duct4BJ
6" 168mm Duct6BJ
8" 200mm Duct8J
• General Purpose Duct Pipe •
Dia. (inches) Dia. (mm) Description Code
2" 54mm 6mt duct pipe Socketed Duct 2A
3" 88.9mm 6mt duct pipe Socketed Duct 3
4" 114mm 6mt duct pipe Socketed Duct 4B
6" 168mm 6mt duct pipe Socketed Duct 6B
8" 200mm 6mt duct pipe Socketed Duct 8
30 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 31
DUCT DUCT
Utility Duct Utility Duct
Other coil diameters available on request.
Bends available in 90, 45, 22.5 &11.25 degrees.Please specify angle when ordering.
• PVCu BT/ CCTV Cable Duct •
OD (mm) WT (mm) Description Code
96.5mm 2.8-3.00mm 96.5mm Grey B.T. Duct 6mtr Lengths S/S PVC96BX6
96.5mm 2.8-3.00mm 96.5mm Grey B.T. Duct Couplers PVC96BCPL
96.5mm 2.8-3.00mm 96.5mm Grey B.T. Duct Bends S/S PVC96BX45
96.5mm 2.8-3.00mm 96.5mm Green C.C.T.V. Duct 6mtr Lengths S/S PVC96GX6
96.5mm 2.8-3.00mm 96.5mm Green C.C.T.V. Duct Couplers PVC96GCPL
96.5mm 2.8-3.00mm 96.5mm Green C.C.T.V. Duct Bends S/S PVC96GX
• Polyduct Coil •
Description Code
37mm O.D/ 32mm I.D. x 100mtr Polyduct Coils 37O.D
44mm O.D/ 38mm I.D. x 100mtr Polyduct Coils 44O.D
60mm O.D/ 50mm I.D. x 50mtr Polyduct Coils 60O.D
Bends available in 90, 45, 22.5 & 11.25 degrees. Please specify angle when ordering.
• PVCu Street Lighting/ Traffic Signal Duct •
OD (mm) WT (mm) Description Code
107mm 5mm 107mm 5mm wall Orange “TRAFFIC” 6mtr PE405X6TS
107mm 3mm 107mm 3mm wall Orange “STREET” 6mtr PE403X6SL
107mm 5mm 107mm Orange S/S 45 Degree Bend PE40X45
107mm 5mm 107mm Orange Coupler PE40XCPL
• Ridgicoil •
OD (mm) WT (mm) Description Code
40mm 31mm 40mm x 50mtr coil RC4050*
50mm 40mm 50mm x 50mtr coil RC5050*
63mm 50mm 63mm x 50mtr coil RC6350*
75mm 60mm 75mm x 50mtr coil RC7550*
90mm 71mm 90mm x 50mtr coil RC9050*
110mm 94mm 90mm x 50mtr coil RC11050*
125mm 108mm 125mm x 50mtr coil RC12550*
140mm 115mm 140mm x 25mtr coil RC14025*
160mm 140mm 160mm x 25mtr coil RC16025*
* When ordering please use code plus pipe colour required.Colours available: Black, Blue,Yellow, Orange, Purple and Green.Couplers & Seals available on request.
32 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 33
DUCT DUCT
Twinwall Pipe (Duct) Twinwall Fittings (Duct)
• General Purpose Twinwall Duct •
ID (mm) OD (mm) Description Code
94mm 110mm 94mm Pipe 6mtr GPT94
150mm 178mm 150mm Pipe 6mtr GPT150
• Twinwall Ridgiduct Pipe •
ID (mm) OD (mm) Description Code
100mm 118mm 100mm Ridgiduct “Electric” 6mtr RB100x6
125mm 148mm 125mm Ridgiduct “Electric” 6mtr RB125x6
150mm 178mm 150mm Ridgiduct “Electric” 6mtr RB150x6
Also available:Twinwall fittings to suit Ridgiduct Pipe.
• 100mm - 150mm Twinwall Long Rad. Bends •
ID (mm) OD (mm) Code
100mm 118mm B/LR100x
125mm 148mm B/LR125x
150mm 178mm B/LR150x
• 100mm - 150mm Ridgiduct Couplers •
ID (mm) OD (mm) Code
100mm 118mm CRB100
125mm 148mm CRB125
150mm 178mm CRB150
34 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 35
ACCESS SERVICES SUPPLY PIPE
Duct Access Boxes Water Service Pipe
• Polypipe Duct Access Boxes •
Other sizes available on request
Description Code
290mm x 275mm x 300mm Deep Access Box AC2902751
290mm x 275mm Composite Cover B125 CC290275
290mm x 275 Non-Lock Galvanised Frame CCF290275
450mm x 450mm x 300mm Deep Access Box AC4504501
450mm x 450mm Composite Cover B125 CC450450
450mm x 450mm Non-Lock Galvanised Frame CCF450450
600mm x 450mm x 300mm Deep Access Box AC6004501
600mm x 450mm Composite Cover B125 CC600450
600mm x 450mm Non-Lock Galvanised Frame CCFF600450
600mm x 600mm x 300mm Deep Access Box AC6006001
600mm x 600mm Composite Cover B125 CC600600
600mm x 600mm Non-Lock Galvanised Frame CCF600600
* When ordering please use code plus coil length required eg. 20BX25Larger sizes available on requestPolypipe Compression/ Electro fusion fittingsavailable on request 20mm to 450mm
• MDPE •
O.D (mm) Description Code
20mm Blue m.d.p.e. 10bar (25, 50, 100 mtr coils) 20BX*
25mm Blue m.d.p.e. 10bar (25, 50, 100 mtr coils) 25BX*
32mm Blue m.d.p.e. 10bar (25, 50, 100 mtr coils) 32BX*
50mm Blue m.d.p.e. 10bar (50, 100 mtr coils) 50BX*
63mm Blue m.d.p.e. 10bar (50, 100 mtr coils or 6m straight lengths) 63BX*
• Trigon Barrier Pipe System •
• Safe Transportation of potable water throughcontaminated land
• Residential, construction and utility applications
• Impermeable Barrier
• Flexible Construction
• Cost Effective
• Corrosion Resistant
• Engineered Joint Fitting
• Ease of Installation
• MDPE •
O.D (mm) Description Code
20mm Yellow m.d.p.e. 6bar (50 mtr coils) 20YX50
25mm Yellow m.d.p.e. 6bar (50 mtr coils) 25YX50
32mm Yellow m.d.p.e. 6bar (50 mtr coils) 32YX50
50mm Yellow m.d.p.e. 6bar (50 mtr coils) 63YX50
Gas Service Pipe
Electro fusion couplings available on requestLarger sizes available on request
36 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 37
SUSTAINABLE DRAINAGE GEOTEXTILE/ MEMBRANE
Fastrack
Stormcheck Flow Control System
• Fastrack Black Woven Type Geotextile •
Test Description & Standard Results
Mechanical Properties
Tensile Strength (EN ISO 10319)Warp KN/MWeft KN/M
1611
Elongation (EN ISO 10319)Warp %Weft %
2116
CBR Puncture Resistance (EN ISO 12236)N 1500
Hydraulic Properties
Water Permeability (NBN B 29001) @ 10 Deg CLines/metre squared/second 18
Characteristic Opening Pore Size(EN ISO 12956) microns 215
Physical Properties
Thickness 2 kPa (EN964/1) mm 0.4
Weight grams/metre square 73
Roll Properties
Roll Size 4.5 x 100 mtr
Stormwater Attenuation/ Soakaway
Manufactured from Recycled Material
Tuffline
• Flow Control System •
• Pre-Fabricated to customer specification
• Choice of depth up to a maximum invert level of six metres
• Lightweight, tough and durable chamber design
• Integrates with other Polypipe advanced drainage systems
• Designed to be used in conjunction with Polypipe Stormwater Solutions
• Choice of chamber sizes from 1050mm,1200mm,1500mm,and 1800mm dia.
• All “Vortex Flow Controllers” and fasteners used are manufactured from A2 304 Stainless Steel
• Option of Step Irons to BS1247
• Polystorm System •
• BBA Certification pending
• 95% void ratio
• High Surface Permeability
• Lightweight and easily assembled
• Modular
• Light duty and heavy duty options available
Test Description & Standard Results
Physical Properties:
Standard composition:Type of yarnRaw material
Tapehdpe
Coating:Raw materialColour: front/ backUv stabilization
ldpeBlackYes
Mechanical Properties
Tensile strength-warp (iso 5081)Tensile strength-weft (iso 5081)Elongation-warp at breakElongation-weft at breakCone drop (empa)Cbr (din 54307)Trapezoidal tear strength-warp astm d4533Trapezoidal tear strength-weft astm d4533
24 kn/m24 kn/m20%20%20mm3kn180 n180 n
Hydraulic Properties
Permeability (100mm water column) Impermeable
Transport information:
WeightThicknessWidthLength
300g/m2
0.46mm4.00m100m
• Tuffline Membrane •
Also available in minipacks and minirolls
Wade Drainage
• Roof Outlets •
• Wide ranges for use with different types of construction
• Installation in different types of deck with various types of waterproofing membrane
• Cast iron bodies available with medium sump or deep sump with choice of outlet size to connection type
• Bodies with spigot outlet for direct connection to pipework, threaded outlet to connection to pipework via spigot adaptor
38 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 39
DRAINAGE
Harmer Drainage
• Harmer Flat Roof Drainage System •
• Has high flow performance with increased head of water
• Drains up to 40% more roof area than conventional gravity outlets
• Can be used with any connecting pipework material and all popular pipework sizes
• Available as a retro-fit unit and a multi-gully for angled discharge
DRAINAGE
40 D R A I N L I N E S U P P L I E S 41
DRAINAGE DRAINAGE
Valves • Hydrants • Tidal Flaps • Penstocks
Ductile Iron Pressure Pipes & Fittings
• Inherent Strength
• Excellent Impact Resistance
• High Safety Margin
• High Ring Stiffness
• Flexible Joints
• Corrosion Resistance
• Resistance to Tuberculation
• Superior Hydraulic Performance
• Complete Range of fittings
• Comprehensive Product Range
• Consistent High Quality Performance
D R A I N L I N E S U P P L I E S
Please contact our office for further information.
Drainage for every application
Modular 2000 Shower & Floor Drainage
Point Drains Roof Drainage
Grease Traps Access Covers
MODULAR 2000
• Four Standard Widths:155, 205, 255 and 305mm
• Corner,Tee and outlet channels• Wide range of gratings• Sloping & constant inverts• Manufactured from stainless steel
SHOWER & FLOOR DRAINS
• Height adjustable aluminium floor drains
• Shower drain available in six standard colours
• Easily maintained• Range of gratings & covers
STAINLESS STEEL POINT DRAINS• Mini floor drain with removable
grating or cover• Industrial gullies have a choice of
removable gratings and covers in six styles
• Supplied with removable foul air trap
ROOF BALCONY DRAINAGE
• A wide range of sizes and outlet configurations
• Domed & flat gratings• Manufactured from LM6
aluminium and steel soil pipe systems
GREASE INTERCEPTORS
• Various sizes available• Free standing & underground• Manufactured from polyethylene,
polypropylene and polymer concrete
ACCESS COVERS• Manufactured from stainless steel
and resin concrete• Suitable for medium and
heavy-duty loading• Double-sealed and recessed
D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 43
POLLUTION CONTROL SYSTEMS RAINWATER/ GUTTER SYSTEMS
Classical Cast Iron
Half Round Rainwater• 112mm gutter available in Grey, White,
Black & Brown• 150mm gutter available in: Grey, Black
& BrownPolyflow Deep Capacity Gutter • 117 x 75mm Nominal gutter available
in: Grey,White, Black & Brown• 68mm pipes & Fittings
Square Section Rainwater• 112mm Nominal gutter available in:
Grey,White, Black & BrownSovereign High Capacity Gutter • 117 x 75mm Nominal gutter available
in:White, Black & Brown• 68mm round or 65mm square pipes
& fittingsOgee Extra Capacity Gutter • 130 x 70mm nominal gutter available in
White, Black & Brown• 68mm round or 65mm square pipes
& fittings
PVCu Half Round
• Classical Cast Iron Guttering •
Classical rainwater downpipes (circular)are produced using the latest pipe manufacturing technology - centrifugallyspinning the pipe ensuring consistent section dimensions, unlike that of the traditional sand cast method, which isprone to producing 'thick' and 'thin' spotsmaking the pipe inherently weaker.
• All the Classical standard HR gutters have undergone hydraulic testing (HR Wallingford) to establish actual capacity,capabilities and performance
• Circular downpipes incorporating the new socket design have also been assessed in conjunction with gutters
• New cast iron jointing kit.A rubber gasket jointing kit for use with G800 HR gutters enabling quicker and cleaner installation
• Classical is available either with black primer coating or factory applied top coat
• Polypipe PVCu Rainwater BS 4576 •
• Sewage Treatment Plants •
• Unobtrusive below ground installation
• Suitability for varying invert levels
• Excellent durability
• Low profile results in shallow depth excavation
• Simple maintenance with easy desludging
• Proven standards of discharge
• Pumping stations •
• Ready for immediate and simple installation
• Factory built and quality assured
• Bespoke systems
• High level alarm fitted as standard
• Full CPC after sales maintenance available
• Bypass Separator •
• High discharge standard
• Use in high risk spillage areas
• Competitive types can bypass prematurely with the risk of pollutant passing forward to outlet
• Septic Tanks & Cesspools •
• Sizes suitable for domestic or industrial use
• Cylindrical shape reduces excavation depth
• High level alarm
• Most economical solution to sewage disposal
Clearwater Process Control Underground Tanks
42
44 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 45
DRAINAGE HEATING
Flexible Couplings/ Adaptors Under Floor Heating
• Polypipe Under Floor Heating Systems •
• No scale build-up
• No corrosion
• Completely lead free
• Quieter system - minimal system creaking or water hammer
• No frost-burst pipes
• Electrically non-conductive - safer systems - minimal earthing requirements (consult IEE safety guide)
Full Design/ Take-off Service
Polyplumb under floor central heating systemsare based on loops of Polyplumb polybutylenebarrier pipe conveying hot water.The pipe isoffered in two diameters. 15mm pipe is suitablefor smaller areas (typical domestic sized rooms).18mm pipe is suitable for larger areas served by a single circuit (commercial and industrial applications). Polyplumb polybutylene pipe is flexible and may be bent simply by hand to a minimum radius of 12 x diameter.The pipe maybe bent safely even at low temperatures - there is no need for pre-heating even at zero degreescentigrade.
Polyplumb pipe is delivered to site in user friendlycoils. It is easy to transport and does not needlong vans.A coil may generally be carried by oneor two men with no special lifting or accessrequirements on site. Pipe is then easy to "walkout" from the coil because of Polyplumb's uniqueplumb-straight technology.
Couplings and Adaptor Couplings are primarilyused in sewer, drain and other non-pressureapplications giving a leak proof seal on virtually anypipe material and diameter.
• An alternative to a traditional coupling for plain ended pipes
• Where a post connection is required into an existing drain or sewer
• For insertion of a new pipe in order to replace a damaged section of existing sewer or drain
• Where pipes of different material and diameter require connection e.g. jointing plot drainage to a private shared sewer
• Where pipes have been cut or short lengths of pipe require jointing
46 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 47
STREET FURNITURE STREET FURNITURE
Bollards
DSF 102
DSF 103
DSF 105
DSF 106
DSF 114
• Architectural appeal
• Traditional & contemporary designs
• Excellent pedestrian protection
• Long lasting
• 100% recyclable material
Tree Grills
• Attractive proven designs
• Tree and root protection
• Allows irrigation
• Integrated with paving
Code No. Outside Dimensions Internal Aperture Sections Thickness
DSF 306 1200 x 1200 450mm Dia. 2 25
Code No. Outside Dimensions Internal Aperture Sections Thickness
DSF 310 1200 x 1200 440mm Dia. 2 20
48 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 49
STREET FURNITURE STREET FURNITURE
Seating
• Heavy duty, traditional or modern designs,elegant, ergonomically designed
• Seats and benches available which can also be supplied in various modular configurations
• Square, hexagonal etc.units available
• Standard length 1800mm,other lengths on request
• Arm supports available for seats and benches
• Alternative pattern perforating available
Cycle Parking
Litter Bins
DSF 2001DSF 2000
DSF 2002
All open top litter bins come witha robust galvanised steel liner withtwo lifting handles.
50 D R A I N L I N E S U P P L I E S D R A I N L I N E S U P P L I E S 51
STREET FURNITURE ASSOCIATED COMPANIES
Building MaterialsDistributors
Tel: 020 8573 [email protected]
Tel: 020 8573 [email protected]
Specialist Distributorof Timber and Sheet Materials
Plaswood Recycled Landscaping Products
• Outdoor Furniture, Bollards & Fencing •
• Eco-friendly - 100% recycled polythene
• Long lasting - up to four times longer than the wood alternative
• Low maintenance - rot proof and algae resistant
• Fully recyclable at the end of its use
• Completely inert - will not leach any chemicals into the ground
• Tough, durable and strong
• Splinter free - can be moulded into any shape
• Vandal resistant. Graffiti resistant
• Versatile - easily used in conjunction with other materials
• Less energy required to manufacture
• Savings of oil for every tonne of recycled polythene
• Award winning
WALKWAYS
EDGING
FENCING
GATES
SIGNAGE
BOLLARDS
BARRIERS
FURNITURE
Unit 4, Stewart Quay, Off Printing House Lane,Hayes, Middlesex, UB3 1APTelephone: 020 8561 6437 Fax: 020 8561 6439email: [email protected]