372 +800.633.9876 | www.extron.com
SMX System MultiMatrixDigital and Analog Multi-Plane Modular Matrix Switcher
DESCRIPTIONThe SMX System MultiMatrix Series of digital and analog multi-plane matrix switchers combines multiple, independent matrix switchers in a truly modular, field-configurable frame. SMX frames are available in sizes from 2U up to 5U, capable of supporting up to 10 separate matrix boards which can be switched independently or simultaneously, all under a single point of control. The SMX combines the proven reliability and high performance of Extron's popular CrossPoint™, MAV Plus, HDXP Plus, and MVX Series matrix switchers with the efficiency of a modular matrix switcher design. The SMX System is an ideal choice for medical imaging systems, conference and training facilities, and other mid-sized applications that require the switching of different signal types and a cost-effective upgrade path for ongoing I/O or signal format changes.
SERIES FEATURES• Choice of 2U, 3U, 4U, or 5U frames
• Choose from digital, analog, wideband, and stereo audio matrix boards
• Single point of control for up to 10 separate switching planes
• Hot-swappable matrix board slots allow installation and replacement of matrix boards in three easy steps
• Field re-configurable and updateable
• 10 presets per switching plane
• Redundant Power Supply - On specific models
MATRIX SWITCHERS ModuLAR & EXPAndABLE MATRIX SWITCHERS
WirelessMicrophone System
VideoconferenceCodec
MediaServersPCs
HDTVCamera Systems
Laptops
DVD/VCRCombo
Presentation Room
Video Conference Room
Training Room 1
Training Room 2
Auditorium
Media Room
ExtronSMX System MultiMatrixModular Multi-Plane Matrix Switcher
ExtronMGP 464
Projectors
Inputs Outputs
Sound Systems 1 - 6
HDTV Monitors
Data Monitors
Video Recorders
Main ProjectionDisplay
Video Monitors
Shown with optional I/O boards
373+800.633.9876 | www.extron.com
SPECIFICATIONSVIDEO— COMPOSITE VIDEO (SMX 84/88/1616 V)
Bandwidth 150 MHz (-3 dB), fully loaded
VIDEOINPUT— COMPOSITE VIDEO (SMX 84/88/1616 V)
Nominal level 1 Vp-p for composite video
VIDEOOUTPUT— COMPOSITE VIDEO (SMX 84/88/1616 V)
Nominal level 1 Vp-p for composite video
SYNC— COMPOSITE VIDEO (SMX 84/88/1616 V)
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
VIDEO— S-VIDEO (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
Bandwidth 150 MHz (-3 dB), fully loaded
VIDEOINPUT— S-VIDEO (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
Nominal level 1 Vp-p for Y S-video0.3 Vp-p for C of S-video
VIDEOOUTPUT— S-VIDEO (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
Nominal level 1 Vp-p for Y S-video0.3 Vp-p for C of S-video
SYNC— S-VIDEO (SMX 84/88/1616 SV, SMX 84/88/1616 YC)
Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
VIDEO— WIDEBAND (SMX 84/88/1616 WB)
Bandwidth 400 MHz (-3 dB), fully loaded
VIDEOINPUT— WIDEBAND (SMX 84/88/1616 WB)
Nominal level 0.7 Vp-p for RGB
VIDEOOUTPUT— WIDEBAND (SMX 84/88/1616 WB)
Nominal level 0.7 Vp-p for RGB
SYNC— SMX 88 SYNC, SMX 88 H+V,SMX1616SYNC
Input level 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level AGC to TTL: 4.0 V to 5.0 V p-p, unterminated
VIDEO— VGA (SMX 84/88/1616 VGA)
Bandwidth 350 MHz (-3 dB), fully loaded
VIDEOINPUT— VGA (SMX 84/88/1616 VGA)
Nominal level 0.7 Vp-p for RGB
VIDEOOUTPUT— VGA (SMX 84/88/1616 VGA)
Nominal level 0.7 Vp-p for RGB
SYNC— VGA (SMX 84/88/1616 VGA)
Input level 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level AGC to TTL: 4.0 V to 5.0 V p-p, unterminated
DIGITALVIDEO— SMX 44/84/88/1616 SDI
Maximum data rate 2.97 Gbps
Operation standards SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120
DIGITALVIDEOINPUT— SMX 44/84/88/1616 SDI
Nominal level 0.80 Vp-p ± 10%
Input cableequalization distanceHD-SDIExtron SHR,Belden 1694A cable 500' (152 m)Extron HR,Belden 1505A cable 400' (122 m)
NOTE: The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system.
DIGITALVIDEOOUTPUT— SMX 44/84/88/1616 SDI
Connectors 4, 8, or 16 female BNC
Re-clocking Automatic, or use available bypass mode for nonstandard rates
Jitter <0.2 VI
VIDEO— SMX 44/48/84/88 DVI
NOTE: *Appropriate DVI-D-to-HDMI cables or adapters are required for HDMI signal input/output.
Maximum data rate 4.95 Gbps (1.65 Gbps per color)
Resolution range Up to 1920x1200 @ 48, 50, or 60 Hz; or 1080p @ 60 Hz
Signal type Single-link DVI digital video signals are supported.NOTE: These SMX DVI Series boards are not compatible with HDMI 1.3.
Digital audio Not supportedEDID and DDC Supports Extended Display Identification Data (EDID) and Display Data
Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
HDCP Not supported
Switching speed 200 ns, max.
VIDEOINPUT— SMX 44/48/84/88 DVI
Equalization Automatic
Input cable length >50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p
NOTE: The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system.
VIDEOOUTPUT— SMX 44/48/84/88 DVI
Re-clocking Automatic
Peripheral device power 250 mA per output
VIDEO— SMX 44/48/84/88 DVI PRO
Resolution range Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz
Signal type Single-link DVI digital video signals are supported.NOTE: These SMX DVI PRO Series boards are compatible with HDMI 1.3.
Digital audio Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards
VIDEOINPUT— SMX 44/48/84/88 DVI PRO
Equalization Automatic
Input cable length >50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p
NOTE: The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system.
VIDEOOUTPUT— SMX 44/48/84/88 DVI PRO
Re-clocking Automatic
Peripheral device power 250 mA per output
VIDEO— SMX 44/48/84/88 HDMI
NOTE: *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Resolution range Up to 1920x1200 or 1080p @ 60 Hz
Signal type Single-link HDMI (or DVI-D*)NOTE: These SMX HDMI Series boards are compatible with HDMI 1.3.
Digital audio Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.3 standards
HPD Supports hot plug detection (HPD) of display as a pass-through signal.
VIDEOINPUT— SMX 44/48/84/88 HDMI
Equalization Automatic
Input cable length >50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p
NOTE: The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system.
VIDEOOUTPUT— SMX 44/48/84/88 HDMI
Number/signal type 4 or 8 (depending on model) digital RGB single-link HDMI (or DVI-D*)
Re-clocking Automatic
Peripheral device power 250 mA per output
OPTICALSPECIFICATIONS— SMX 88/1616 FOX 4G FIBER OPTIC I/O BOARD
Connectors 8 or 16 LC connectors per I/O board
Operating distanceSinglemode 30 km (18.75 miles) with singlemode (SM) cables with an Extron
singlemode distribution amplifier or TX/RX unitMultimode 300 m (985') with 62.5 µm multimode (MM) cables
1 km (3280') with 50 µm multimode (MM) cables 2 km (6561') with 50 µm 2000 MHz bandwidth laser multimode cable
Optical loss budgetSinglemode 12 dB, maximumMultimode 7 dB, maximum
VIDEO— SMX 88/1616 FOX 4G
AUDIO— SMX 84/88/1616A (ANALOG)
Frequency response 20 Hz to 20 kHz, ±0.05 dB
AUDIOINPUT— SMX 84/88/1616 A (ANALOG)
Nominal level 0 dBu (0.775 Vrms)
Input gain adjustment –18 dB to +24 dB, adjustable per input; default = 0 dB
AUDIOOUTPUT— SMX 84/88/1616 A (ANALOG)
Maximum level (Hi-Z) >+21 dBu, balanced or unbalanced at 0.1% THD+N
Maximum level (600 ohm) >+15 dBm, balanced or unbalanced at 0.1% THD+N
Volume control range -76 dB to 0 dB (volume numbers 0 through 64) in a 35 dB increment from step 0 to step 1, then in 1 dB increments from steps 1 to 64; default = 64 (0 dB)
CONTROL/REMOTE— SWITCHER HOST PORTS
Serial host control port 1 bidirectional RS-232 or RS-422, rear panel female 9-pin D connector1 bidirectional RS-232 front panel 2.5 mm mini stereo jack
Ethernet control port 1 female RJ-45
GENERAL
Power 100 VAC to 240 VAC, 50-60 Hz, 180 watts with or without redundant power supply, internal
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensingOperating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
MountingRack mount Yes
Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.)SMX 200 Frame 3.5" H x 17.0" W x 12.0" D (2U high, full rack wide)
(8.9 cm H x 43.1 cm W x 30.5 cm D)SMX 300 Frame 5.25" H x 17.0" W x 12" D (3U high, full rack wide)
(13.3 cm H x 43.2 cm W x 30.5 cm D)SMX 400 Frame 7.0" H x 17.0" W x 12" D (4U high, full rack wide)
(17.8 cm H x 43.2 cm W x 30.5 cm D)SMX 500 Frame 8.75" H x 17.0" W x 12" D (5U high, full rack wide)
(22.2 cm H x 43.2 cm W x 30.5 cm D)
Shipping weight with boardsinstalledSMX 200 Frame 20 lbs (10 kg)SMX 300 Frame 22 lbs (10 kg)SMX 400 Frame 26 lbs (12 kg)SMX 500 Frame 30 lbs (14 kg)
For complete specifications, please go to www.extron.com
MATRIX SWITCHERS ModuLAR & EXPAndABLE MATRIX SWITCHERS
374 +800.633.9876 | www.extron.com
SMX 200 Frame 2U Modular Multi-Plane Matrix Switcher frame
M AT R I X SW I T C H E R S ModuLAR & EXPAndABLE MATRIX SWITCHERS
UNIqUE FEATURES• Accommodates up to four SMX matrix switcher boards
• Available with or without a redundant power supply
• 2U, full rack width
MODEL VERSIONDESCRIPTION PART#
SMX 200 Frame 2U/4-Slot.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-1021-01 SMX 200 Frame RPS 2U/4-Slot with Redundant Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-1021-11
SMX 300 Frame 3U Modular Multi-Plane Matrix Switcher frame
UNIqUE FEATURES• Accommodates up to six SMX matrix switcher boards
• Available with or without a redundant power supply
• 3U, full rack width
MODEL VERSIONDESCRIPTION PART#
SMX 300 Frame 3U/6-Slot.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-855-01 SMX 300 Frame RPS 3U/6-Slot with Redundant Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-855-11
SMX 400 Frame 4U Modular Multi-Plane Matrix Switcher frame
UNIqUE FEATURES• Accommodates up to eight SMX matrix switcher boards
• Available with or without a redundant power supply
• 4U, full rack width
MODEL VERSIONDESCRIPTION PART#
SMX 400 Frame 4U/8-Slot.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-856-01 SMX 400 Frame RPS 4U/8-Slot with Redundant Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-856-11
375+800.633.9876 | www.extron.com
SMX 500 Frame 5U Modular Multi-Plane Matrix Switcher frame
M AT R I X SW I T C H E R S ModuLAR & EXPAndABLE MATRIX SWITCHERS
UNIqUE FEATURES• Accommodates up to ten SMX matrix switcher boards
• Available with or without a redundant power supply
• 5U, full rack width
MODEL VERSIONDESCRIPTION PART#
SMX 500 Frame 5U/10-Slot.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-857-01 SMX 500 Frame RPS 5U/10-Slot with Redundant Power Supply.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-857-11