Bosch Motorsport | Diesel System Components
Diesel System Components
www.bosch-motorsport.com
u Modification of Common Rail systems
u Different modification levels available
u All hydraulic parts available
The geometry and characteristics of Diesel enginecomponents are more dependent upon the applicationthan those for gasoline engines. A single injector de-sign will not fit all Diesel engines due to varying me-chanical and nozzle geometry requirements. In addi-tion, the injection system can vary from year to yeareven within the same make of car.Bosch Motorsport uses the same Common Rail tech-nology for racing that was developed for productionvehicle applications. This includes both solenoid (mag-netic) technology and the latest cutting-edge piezotechnology.Bosch Motorsport can offer a wide variety of modifica-tions to fit the system to your specifications. Thesemodifications include:
• Definition of suitable base components from other (orlarger) engine applications.
• Adaptation of components for mating, fit and orienta-tion to suit the selected application.
• Flow enhancement of injectors and rails.• Injector nozzle adaptation (flow rate, number of
holes, spray cone angle etc.).Our goal is to offer the best balance of cost and per-formance for your application. This is why we offer dif-ferent levels of modifications to choose from. Below isan example of the different levels for a 4-cylinder en-gine with 4 injectors, 1 high pressure pump and a sin-gle fuel rail:
Installation Notes
When contacting us for more information on our Dieselcomponents, please have the following informationready so that we may best determine components re-quired for your application:
• The base engine / the car where this engine originallyis installed
• Model year and type of car / engine• The base output level and the desired output level for
the engine• If it is originally equipped with Bosch components:
the part numbers of the Bosch components• Alternatively the car / engine manufacturer part num-
ber of the original injection system.
NoticeIf your engine is originally equipped with Boschcomponents, modifications will be easier than re-placing third party components.
NoticeWe reserve the right to assess a fee for applica-tions where the component specification requiresan extraordinary amount of time.
Dimensions
Common Rail Pumps CP1H, CP3, CP4
Rails Max. 6 cyl./bank
Pressure Sensors RDS Max. 2,400 bar
Injectors CRI 2 (Solenoid),CRI 3 (Piezo)
Pressure ControlValves
DRV Max. 2,400 bar
2 | Diesel System Components
Represented by:
Europe: North America: Latin America: Asia-Pacific: Australia, New Zealand and South Africa:Bosch Engineering GmbHMotorsportRobert-Bosch-Allee 174232 AbstattGermanyTel.: +49 7062 911 9101Fax: +49 7062 911 [email protected]
Bosch Engineering North AmericaMotorsport38000 Hills Tech DriveFarmington Hills, MI 48331-3417United States of AmericaTel.: +1 248 876 2977Fax: +1 248 876 [email protected]
Robert Bosch LtdaMotorsportAv Juscelino Kubitscheck deOliveira 11800Zip code 81460-900Curitiba - ParanaBrasiliaTel.: +55 41 3341 2057Fax: +55 41 3341 2779
Bosch Engineering Japan K.K.Motorsport18F Queen’s Tower C, 2-3-5 Minato MiraiNishi-ku, Yokohama-shiKanagawa 220-6218JapanTel.: +81 45 650 5610Fax: +81 45 650 5611www.bosch-motorsport.jp
Robert Bosch Pty. LtdMotorsport1555 Centre RoadClayton, Victoria, 3168AustraliaTel.: +61 (3) 9541 [email protected]
© Bosch Engineering GmbH 2017 | Data subject to change without notice2775880331 | en, V2, 13. Mar 2017
