Processing of Cut Floral Materials
Principles and Elements of Floral Design TEKS C (6) (e) Demonstrate the
technical skills for increasing the preservation of cut flowers and foliage.
Why is it important to handle and care for cut flowers properly?
Why do you place leftover food in a sealed container in the refrigerator?
Today we will…
• Determine the importance of processing cut flowers.
• Identify steps in processing cut flowers.• Create a role play demonstrating the
steps involved in processing flowers.
Why process cut flowers?• As flowers travel through the distribution chain,
they spend long distances without light or water and in closed boxes.
• It is important to follow proper processing procedures in order to restore vigor and usability of cut flowers and foliage after shipping.
Remove Lids• If flowers or foliage are shipped in
boxes, the first thing to do when the boxes arrive is to remove the lids.
• This helps any built up ethylene gas to escape.
• Prevents more injury to the flowers.
www.brannanst.com
Remove Wrappers• Remove the wrappers from the
bundles as they also trap ethylene. • Wrappers encourage mildew the
longer the product stays enclosed.
www.flowersleeves.com
Floral Food• Getting the stems back into
the water is critical.• Mix high quality warm room
temperature water with floral food according to manufactures’ directions.
• Only use clean buckets.• Metal containers should not
be used as it has a chemical reaction with the floral food and makes it useless.
www.sona.oasisfloral.com
Remove Lower Leaves
• Remove all leaves and debris from the stem below the water line.
• Remove leaves before cutting the stems.
• If the water gets contaminated with debris it will start to decay very quickly and produce bacteria cells.
• Bacteria can clog the cut end of the stems which will prevent water transfer into the stem.
Cut Stems• The ends of the stems need to be cut off at least
¾”• Stems should be placed into the floral
food/water solution within 90 seconds after cutting.
• Cutting the ends of the stems eliminates the damaged and dried tissue as a result from not being in water.
• If the cell structure dries it cannot transport water.
www.rosefloral.com
Dip in Pretreatment• Dip stems in pretreatment if required. • Pretreatments during processing are a benefit to
many flowers. • An example of one is a high concentration of
citric acid which helps move water up the stem.• Treatments are done right after the stem is cut
and prior to placing it in the floral food/water solution.
www.lofloristsupplies.com
Conditioning • Place the cut stems into the floral food/water
solution for hydrating. • Once the stems are back in water, it needs time
at room temperature to soak up the solution and re-hydrate.
• Flowers should be conditioned for a minimum of an hour to be effective.
www.diyyourwedding.com
Hardening• Place buckets of hydrating product in cooler. • After flowers have had sufficient time to
condition they should be put into humid cold storage.
• This slows the process of respiration and transpiration.
www.acgcapital.com
Activity• Students will be divided into 8
groups. • Each group will be assigned one of
the following steps in processing cut flowers: remove lids, remove wrappers, floral food, remove lower leaves, cut stems, pretreatment, conditioning, hardening.
• Each group will be responsible for role playing the steps and teaching the class about the importance of their specific topic.
Review
• Why should we process cut flowers?• Why is ethylene gas harmful?• Why is it important to remove leaves and
debris from below the water line?• How long do you have to place the stem
in the floral food/water solution after you cut the stem?
Today we…
• Determined the importance of processing cut flowers.• Identified steps in processing cut
flowers.• Created a role play
demonstrating the steps involved in processing flowers.