EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6
Design Project #1: Dumpling Maker
Submitted by: Chetan Supanekar Jacob Johnson Mikaela Zacher Justin Gottheld Submitted to: Xinli Wu
FIG. 1. Fall, 2014 Submitted 11/3/2014
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6 Abstract:
The design for a dumpling maker came through the process of conceptualizing
various designs based on criteria and preferences by the design specifications and
prospective customers. The final design is a compact, self-contained, easy to use, semi-
automatic machine that uses different compartments to separate ingredients and put
together dumplings from a system of rollers and gravity. The rollers are operated by a
hand crank and belts that connect them for ease of use. It shows the basis of a
functioning dumpling maker that can be used in personal or professional settings.
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6 Table of Contents
Page 1: Cover Page (Jacob Johnson)
Page 2: Abstract (Justin Gottheld)
Page 3-4: Table of Contents (Justin Gottheld)
Page 5: Introduction
Problem Statement (Jacob Johnson)
Mission Statement (Jacob Johnson)
Design Specifications (Xinli Wu)
Gantt Chart (Mikaela Zacher)
Customer Needs Assessment (Mikaela Zacher)
Page 6-8: Concept Generation (entire team)
Page 9: Design Matrices (entire team)
Page 10-13: Working Drawings (Mikaela Zacher and Justin Gottheld)
Page 13: Prototype (entire team)
Page 14: Design Features (Justin Gottheld) Operation Instructions (Justin Gottheld) Working Mechanism (Justin Gottheld) Cost Analysis (Chetan Supanaker)
Page 15: Conclusion and Suggestions (Mikaeala Zacher)
Page 16: References (Chetan Supanaker)
Links to Authors: Justin Gottheld Mikaela Zacher Jacob Johnson Chetan Supanaker
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6 Table of Contents continued
FIG. 1. Image of Prototype
FIG. 2. Gantt Chart
FIG. 3. Image of Concept Generation 1
FIG. 4. Image of Concept Generation 2
FIG. 5. Image of Concept Generation 3
FIG. 6. Image of Concept Generation 4
FIG. 7. Image of Concept Generation 5
FIG. 8. Image of Detail Drawing 1
FIG. 9. Image of Detail Drawing 2
FIG. 10. Image of Detail Drawing 3
FIG. 11. Image of Final Design
FIG. 12. Image of Exploded View with BOM
FIG. 13. Image of Final Design with front plate removed
Table 1. Design Matrix
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6 Introduction:
The design process, conceptualization, and details of the dumpling maker are detailed in
this report to reveal thought processes, decisions, and final design for this project.
Problem Statement:
Making Dumplings by hand is too inefficient for mass production.
Mission Statement:
Our goal is to create a more efficient and cost-effective method of producing dumplings.
Design Specifications:
The dumpling maker must be automatic or semi-automatic, safe, easy to maintain,
dishwasher safe, able to make at least ten dumplings per minute, and cost no more than
two hundred dollars.
Gantt Chart:
FIG. 2.
Customer Needs Assessment:
Prospective customers of a dumpling maker desired a machine that is compact, easy to
use, and self-contained. We formulated the basis of our design off of the design
specifications and these preferences.
0 1 2 3 4 5 6 7
Target Specifications
Information Gathering
Brainstorming
Design Matrix
Design Drawings
Construction
Design Evaluation and Testing
Project Report
Oral Presentation
Chart Title
Series 1 Series 2
9/8/14 9/15/14 9/22/14 9/29/14 10/6/14 10/13/14 10/20/14 10/27/14
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6 Concept Generation:
FIG. 3.
FIG. 4.
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6
FIG. 5.
FIG. 6.
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6
FIG. 7.
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6 Design Matrices:
Design Matrices
Selection Criteria JJ (reference) MZ JG1 JG2 CS
speed of production 0 - + - -
production quality 0 0 0 0 0
ease of use 0 + + 0 +
ease of manufacture 0 + + - -
portability 0 - + + +
process simplicity 0 + + 0 +
cost 0 0 0 0 0
sum +'s 0 3 5 1 3
sum 0's 0 2 2 4 2
sum -'s 0 2 0 2 1
net score 0 1 5 -1 2
rank 4 3 1 5 2
Continue? no yes yes no yes
Concepts
Selection Criteria Weight MZ (reference) JG CS
rating score rating score rating score
speed of production 20% 3 0.6 5 1 4 0.8
production quality 15 3 0.45 2 0.3 3 0.45
ease of use 10 3 0.3 4 0.4 4 0.4
ease of manufacture 20 3 0.6 4 0.8 2 0.4
portability 5 3 0.15 4 0.2 4 0.2
process simplicity 15 3 0.45 4 0.6 4 0.6
cost 15 3 0.45 3 0.45 3 0.45
total score 3 3.75 3.3
rank 3 1 2
Continue? no yes no Table 1.
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6 Working Drawings:
FIG. 8.
FIG. 9.
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6
FIG. 10.
FIG. 11.
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6
FIG. 12.
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6
FIG. 13.
Prototype:
Scale 1”:1.25”
FIG.1.
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6 Design Features:
This design includes a box style setting where the top is indented to allow the
separation of the dough and filling compartments. Both the dough and filling are fed
through by rollers connected by belts and a hand crank to operate. Platforms are located
inside to guide dough to a second set of rollers and out of the machine through a cut hole
in the front.
Operation Instructions:
To operate the dumpling maker, put filling ingredients into the middle section that
is cut off from the rest of the top of the maker and mix together dough ingredients into
the general section of the top. Rollers and holes are located close enough together that
dough and filling will not go through until fed by operating the hand crank. Turn the
hand crank clockwise to turn the rollers and begin feeding dough and filling into the
machine and eventually out of the machine cut into dumplings along with some excess
dough that can be reused in top section for further dumpling creation. Speed of process is
based the speed on which the hand crank is turned but should not exceed twenty
revolutions per minute for best results of dumplings.
Working Mechanism:
The design works through a system of rollers and gravity. When the dough and
filling are in their top compartments, the hand crank will feed them through to center of
the dumpling maker. The dough is fed as two separate strips which land on a slanted
ramp that directs each strip to the center while the filling roller, which have semi-circle
cut in them will allow a portioned amount drop onto the dough per revolution. When the
dough strips and filling meet, they are entering a second set of rollers which have a
dumpling shape imprinted into them with metal edges to cut out a dumpling with each
revolution of the hand crank. The finished dumpling and a small amount of excess dough
travel down a final ramp which will drop it out the front of the dumpling maker.
Cost Analysis: Total estimated cost: $103.17
Aluminum Panels that will be cut and shaped to be used to form the basic shape of the machine and several ramps on the internal to help the machine function more efficiently
$9.88 per panel, 5 Panels
The crank plus gears will allow the machine to go through the process of flattening and cutting the dumpling into shape
23.99 for the Crank plus belt
Aluminum Rods or rollers will be used to flatten the dough
2 1/2x36 inch rods will be cut to size, $7.21 each
Nuts and bolts will be used to hold the various aluminum plates and rollers together
20 Nuts and Bolts, $10.96
Washers will be used with the nuts and bolts to allow them to have a more flush fit to the aluminum
25 pack, $4.50
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6 Conclusion and Suggestions:
This design is the basis for a dumpling maker that is a much more efficient way to
create dumplings by hand and is a good tool for anyone that wants to make them for
either personal or professional use. Some suggestions on improving the design include
removing wasted space to make the design more compact and cost effective, making the
final hole bigger to assure that the dumplings fit out after they have been created, and use
gears instead of a belt to connect the various rollers to improve speed of the dumpling
maker.
EDSGN 100 Introduction to Engineering Design Sec. 010 Team: 6 References
"McMaster-Carr." McMaster-Carr. Web. 02 Nov. 2014. Wu, Xinli. "EDSGN 100 Introduction to Engineering Design." EDSGN 100: Xinli Wu,
Ph.D., P.E. Penn State, University Park. Web. 02 Nov. 2014.