Connecting Innovations In Hardware With Windows,Patio Doors, And Skylights.
double hung / single hung products
slidingwindow hardware
catalog
Sliding Window Hardware CatalogTABLE OF CONTENTS
Page No. Product Line / Description
1 ..................700 Series - 700 Series Locks & Keepers
2 ............Recess Mount - Recess Mount Locks
3 ................7538 Series - Sash Lock & Keeper
4 ................9200 Series - Sash Lock & Keepers
5 ....................17 Series - TrimLine™ Cam Locks
6...........................Misc. - TrimLine Cam Lock Keepers
7 ................9400 Series - Sash Lock
8 ....................17 Series - EntryGard®II Cam Lock
9...........................Misc. - EntryGard® Cam Lock Keepers
10 ..................17 Series - Sash Lock
11 ..................17 Series - Button Lock
12 ..............9850 Series - 9850 Series “Quick-Snap” Locks
13 ..............9900 Series - 9900 Series Lock
14 ..............9950 Series - 9950 Series Locks
15 ............30590 Series - Cam Gard Series Locks
16 ..................17 Series - Restoration Lock
17 ..................19 Series - Positive Action Lock (PAL) System
18 ..................19 Series - Fusion™ System
19.........................Misc. - Tilt Latches
20.........................Misc. - Sash Lifts
21.........................Misc. - Window Rollers
22.........................Misc. - Pivot Bars
23.........................Misc. - Miscellaneous
24...............Color Chart - Hardware Finishes
TRUTH HARDWARE’S WARRANTYFOR WINDOW & DOOR MANUFACTURERS &
AUTHORIZED DISTRIBUTORS
All Truth Hardware products, with the exception ofelectrical products*, are warranted against defects inmaterials and workmanship for the life of the product.Industry related testing has defined the typical lifetimeof fenestration hardware to be 10 years.
Truth Hardware’s warranty is expressly limited to window& door manufacturers and Truth Hardware AuthorizedDistributors, who purchase Truth Hardware products forthe purpose of resale, or use in the ordinary course ofthe buyers business, and may not be assigned ortransferred.
This warranty does not cover normal wear ordiscoloration on finishes, or any product which hasbeen improperly installed, abused, misused, worn out,altered, used for a purpose other than that for which itwas intended, or in a manner inconsistent with anyinstructions regarding its use, nor does it cover corrosionrelated damage. This warranty only covers electricalproducts that are used to drive manual hardwaresystems (operators and hinges) manufactured by Truth.
THIS WARRANTY IS EXCLUSIVE. TRUTH HARDWAREMAKES NO OTHER WARRANTY OF ANY KIND WHAT-SOEVER, EXPRESSED OR IMPLIED, WITH RESPECTTO THE PRODUCTS MANUFACTURED AND SOLD BYIT, WHETHER AS TO MERCHANTABILITY, FITNESSFOR A PARTICULAR PURPOSE, OR ANY OTHERMATTER. No agent, employee or representative of TruthHardware has any authority to bind Truth Hardware toany affirmation, representation, or warranty concerningTruth Hardware products or parts, except stated herein.
If any product manufactured by Truth Hardware isfound to be defective by Truth Hardware, in its solejudgment, Truth Hardware will, at its option, either repairor replace such defective product. Truth’s liability islimited only to the replacement value of the hardware.THIS REMEDY SHALL BE THE EXCLUSIVE REMEDYAVAILABLE FOR ANY DEFECTS IN THE PRODUCTSMANUFACTURED AND SOLD BY TRUTH HARDWAREOR FOR DAMAGES RESULTING FROM ANY OTHERCAUSE WHATSOEVER, INCLUDING WITHOUTLIMITATION, TRUTH HARDWARE’S NEGLIGENCE.TRUTH HARDWARE SHALL NOT IN ANY EVENT BELIABLE TO ANY BUYER FOR CONSEQUENTIAL, ORINCIDENTAL, OR PUNITIVE DAMAGES OF ANY KIND,OR FOR THE LABOR WHICH MAY BE REQUIRED FORTHE REPLACEMENT OF SAID PRODUCT, WHETHERFOR BREACH OF WARRANTY, NEGLIGENCE, ONTHE BASIS OF STRICT LIABILITY, OR FOR ANYOTHER REASON.
The purpose of this exclusive remedy shall be to providethe window/door manufacturer, or Truth HardwareAuthorized Distributor, with replacement of products, or parts, manufactured by Truth Hardware found to be
defective in materials or workmanship, or negligentlymanufactured. This exclusive remedy shall not bedeemed to have failed of its essential purpose so long asTruth Hardware is willing and able to repair or replacesaid defective products or parts in the prescribed manner.
* All Truth Hardware electrical products, are warranted for one (1)year against defects in materials and workmanship.
Terms -
1%/10 days - net 30 days on hardware purchases. Net30 days on freight charges. Tooling invoice termsavailable upon request.
Freight -
F.O.B. Factory
Conditions -
Initial orders, and all subsequent orders placed beforecredit is established with Truth Hardware, will be on acash-in-advance or C.O.D. basis. Cash-in-advanceorders will be entered by Truth Hardware upon thereceipt of the order and payment. Pricing is determinedat time of shipment.
Return Goods -
Authorization from our Sales Department is required in advance for all goods to be returned to TruthHardware. Authorization will be granted in all cases of defective product or incorrect shipments due to anerror on Truth Hardwareís part. Truth Hardware mayalso, at its option, authorize the return of other goodssubject to a 25% restocking charge and including and offsetting order equal in value to the amount of the return. Product considered for return must bestandard product, built to current Truth Hardwaremanufacturing specifications, no older than theimmediate past calendar year, clean, resalable, in full unopened cartons. The quantity to be returnedcannot be excessive based on Truth Hardware’s current level of sales and inventory position. Freight on all return goods must be prepaid to our plant andmerchandise must be received within 30 days of date of authorization.
Terms & Conditions of Sale
700 SERIES LOCKS
1
Truth Hardware’s new 700 Series Locksare by far the most exciting aestheticchanges that have hit the checkrailmarketplace in years. There are fournew designs within the 700 Seriesfamily of locks - each with its owndistinct appearance. However, as uniqueas they each are to the eye, the similaritiesin quality features that the 700 Serieshave as a whole make these productsthe “first family” of check rail locks.
FORGIVING CAM:
The forgiving cam is likely the mostvaluable feature that the windowmanufacturers will realize. Thispatented new innovative design helpsto insure proper engagement betweenthe lock and keeper even on assemblieswhere these two components may bemisaligned. The benefits of thisforgiving cam can help to reduce fieldservice calls down the road.
SECURITY & RELIABILITY:
The pick-resistant design of theselocks helps you exceed forced entryrequirements.
POSITIVE SECURE ACTION:
An improved detent in both the lockingand unlocking motion of the handle,assures the homeowner that the camhas completed its travel.
TIGHTER SEAL:
By pulling meeting rails tightly togetherand by producing a better seal of thesash at the head and sill, the 700 SeriesLock decreases air infiltration. Theselocks produce a .105” (2.7mm) liftingability (Arc style lock has a .156”(4.0mm) lifting ability). And with theirnew slimmer handle design options,their low profile design helps assuremaximum egress opening. Aninnovative spring design holds thehandle in both the locked and unlockedpositions while a concealed lockingmechanism protects moving parts fromdust and dirt for added lock life.
INTERCHANGEABLE:
Designed for 2.062" (52.4mm) center-to-center hole spacing on both the lockand keepers, the 700 Series Locks areinterchangeable with existing designsmaking the move up to this new designvirtually seamless.
LOGO OPTIONS:
For that “personalized touch”, most ofTruth’s 700 Series Check Rail Locksare capable of accepting yourcompany’s name or logo. Truth’sunique custom print logo reproductionprocess is an attractive way ofhighlighting your company signature.For further details on the locks thataccept this process, and where yourcompany’s logo would appear, pleaserefer to the following drawings.
WARRANTY:
Protected under the terms of the TruthWarranty for Window & DoorManufacturers and AuthorizedDistributors. Refer to Truth’s Terms &Conditions for further details.
MATERIAL:
High-pressure, corrosion-resistant,die-cast zinc.
FINISH:
Electrostatically applied, durablecoatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth’s Color Chart forexamples of Truth’s most popularfinish options. Truth also offers a widerange of decorative “plated” finishes -contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
ORDERING INFORMATION:
1. Choose the 700 Series Lock styledesired (specify by part number).
2. Order the appropriate Keeper to fityour lock and window profile (refer todrawings).
3. Specify finish number.
4. Select screws (fasteners). Soldseparately.
RECOMMENDED SCREWS:
4 - Phillips Flat Head Sheet MetalScrews. Refer to lock and keeperdrawings for additional specs. (Lengthand thread type to be determined byprofile) For further information onscrew selection - see Truth Tips.
LOW S LOCK
ARC LOCK
DELTA LP1 LOCK
DELTA LP2 LOCK
DOUBLE HUNG
SLIDER
700 SERIES LOCKS
1a
TRUTH TIPS:
1. When two locks are used on onewindow, the placement of each lock,with respect to its keeper, becomesvery critical to maintain a constantweatherseal on all sides of the windowand to insure that each lock engagesproperly with its keeper.
2. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended.
3. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it may
be necessary to use a longer screw thanis recommended.
4. For metal window profiles, Truthrecommends stainless steel machinescrews. However, in most applications,stainless steel sheet metal screws willprovide adequate holding power.
INCLUDE TRUTH SPECS ON
YOUR NEXT WINDOW PROJECT
Window check rail locks shall beincluded which will increase bothsecurity and weather seal tightness.The lock must provide easy operationand positive locked feel (detent).
Window check rail locks will be ofinternal cam design to provide .062"(4.0 mm) of pull-in to aid in sealingthe meeting rails. The lock andaccompanying keeper will help insureproper engagement even on assemblieswhere these two components may bemisaligned. The lock and keeper shallbe constructed of high pressure zincalloy die castings.
Window locks shall be 700 SeriesLocks, as manufactured by TruthHardware.
CHECKRAIL
GLASS
A
[52.4 mm]2.062
B
SURFACE MOUNT KEEPER APPLICATION
AREA AVAILABLE FORCUSTOMER LOGO
LOCKED POSITION
FIG. 1 APPLICATION OF 700 SERIES CHECKRAIL LOCKS
FIG. 2 700 SERIES LOW S LOCK
.903 [22.9mm]
.653 [16.6mm]
AVAILABLEKEEPERS CPRODUCT
NUMBER
A30700400
A30700401
C30705C30706C30705C30706
A
.888 [22.5mm]
.638 [16.2mm]
FULL SCALE
[52.4 mm]2.062
[13.0 mm].510
[9.3 mm].365
C
[25.4 mm]1.000
[71.4 mm]2.812
B
CAM PULL-IN: .117[2.9mm]
.687[17.4mm]
.437[11.1mm]
.060[1.5mm]
AREA AVAILABLE FORCUSTOMER LOGO
C30706C30705A30700410 .968 [24.6mm]
.953 [24.2mm] .687
[17.4mm][1.5mm] .060
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SHEETMETAL SCREW. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE)
FIG. 2 700 SERIES LOW S LOCK
700 SERIES LOCKS
1b
FULL SCALE
AREA AVAILABLE FOR CUSTOMER LOGO
FIG. 5 700 SERIES DELTA LP2 LOCK
.903 [22.9mm]
.653 [16.6mm]
CPRODUCTNUMBER
A30720400
A30720401
A
.888 [22.5mm]
.638 [16.2mm]
[71.4 mm]2.812
[52.4 mm]2.062
[9.3 mm].365
[13.0 mm].510
C
[25.4 mm]1.000
CAM PULL-IN: .117[2.9mm]
C30706C30705C30706C30705
AVAILABLEKEEPERS
B
B
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLATHEAD SHEET METAL SCREWS.(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE.)
.687[17.4mm] .437[11.1mm]
.060[1.5mm]
AREA AVAILABLE FOR CUSTOMER LOGO
FIG. 4 700 SERIES DELTA LP1 LOCK
.903 [22.9mm]
.653 [16.6mm]
AVAILABLEKEEPERS CPRODUCT
NUMBER
A30730400
A30730401
C30705C30706C30705C30706
A
.888 [22.5mm]
.638 [16.2mm]
FULL SCALE
[71.4 mm]2.812
[52.4 mm]2.062
[9.3 mm].365
[15.0 mm].589
C
[25.4 mm]1.000
CAM PULL-IN: .117[2.9mm]
B
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLATHEAD SHEET METAL SCREWS.(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE.)
.687[17.4mm] .437[11.1mm]
.060[1.5mm]
FIG. 3 700 SERIES ARC LOCK
AREA AVAILABLEFOR CUSTOMERLOGO
.903 [22.9mm]
.653 [16.6mm]
AVAILABLEKEEPERS C CAM
PULL-INC30715C30716C30715C30716
A
.882 [22.4mm]
.632 [16.1mm]
FULL SCALE
[52.4 mm]2.062
[28.6 mm]1.125
[68.6 mm]2.700
C
[12.2 mm].480
[19.8 mm].780
A30710400
A30710401
NUMBERPRODUCT B
.873 [22.1mm]
.623 [15.8mm]
C30715C30716C30715C30716
.852 [21.6mm]
.602 [15.2mm]
A30710402
A30710403
RECOMMENDED SCREWS: (QTY 2) #7 PHILLIPS FLAThead SHEET METAL SCREWS.(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE.)
.687[17.4mm] .437[11.1mm]
.070[1.7mm]
.060[1.5mm]
.437[11.1mm]
.687[17.4mm] .100
[2.5mm] .030[.7mm]
FIG. 3 700 SERIES ARC LOCK
FIG. 5 700 SERIES DELTA LP2 LOCK
FIG. 4 700 SERIES DELTA LP1 LOCK
A30700401A30700400A30700401A30700400A30700401
A30700401A30700400A30700401A30700400A30700401A30700400
A30700400A30700401A30700400A30700401
A30700400A30700401A30700402A30700403
[9.5 mm].375
[9.5 mm].375
[8.1 mm].319
[8.1 mm].319
FIG. 6 C30705 CHECK RAIL LOCK KEEPER
FIG. 8 C30715 CHECK RAIL LOCK KEEPER
.903 [22.9mm]A30700400
A
.653 [16.6mm]
FIG. 7 C30706 CHECK RAIL LOCK KEEPER
.888 [22.5mm]
A
.638 [16.2mm]
.903 [22.9mm]
A
.653 [16.6mm]
.882 [22.4mm]
A
.632 [16.1mm]
FIG. 9 C30716 CHECK RAIL LOCK KEEPER
.653 [16.6mm]
.903 [22.9mm]
.653 [16.6mm]
.903 [22.9mm]
.888 [22.5mm]
.638 [16.2mm]
.888 [22.5mm]
.638 [16.2mm]
[7.9 mm].312
[71.4 mm]2.812
[52.4 mm]2.062
[4.0 mm].156
[9.3 mm].365
[9.3 mm].365
[3.6 mm].141
[71.4 mm]2.812
[52.4 mm]2.062
[52.4 mm]2.062
[4.0 mm].156
[68.6 mm]2.700
[12.8 mm].505
[68.6 mm]2.700
[52.4 mm]2.062
[3.4 mm].135
[12.8 mm].505
[7.1 mm].280
[7.9 mm].312
[6.9 mm].270
B
B
B
B
.623 [15.8mm]
.873 [22.1mm]
.602 [15.2mm]
.852 [22.6mm]
AVAILABLE LOCKS
AVAILABLE LOCKS
AVAILABLE LOCKS
AVAILABLE LOCKS
RECOMMENDED SCREWS: (QTY 2) #6 SCREW WITH A #5 HEAD,PHILLIPS FLAT HEAD SHEET METAL SCREW.(LENGTH AND THREAD TYPE TO BEDETERMINED BY PROFILE.)
RECOMMENDED SCREWS:
(QTY 2) #6 SCREW WITH A #5 HEAD,PHILLIPS FLAT HEAD SHEET METAL SCREW.(LENGTH AND THREAD TYPE TO BEDETERMINED BY PROFILE.)
.060[1.5mm]
.060[1.5mm]
.060[1.5mm]
.060[1.5mm]
.030[.7mm]
.030[.7mm]
RECOMMENDED SCREWS:
(QTY 2) #6 SCREW WITH A #5 HEAD,PHILLIPS FLAT HEAD SHEET METAL SCREW.(LENGTH AND THREAD TYPE TO BEDETERMINED BY PROFILE.)
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SHEETMETAL SCREW. (LENGTH AND THREADTYPE TO BE DETERMINED BY PROFILE.)
700 SERIES LOCKS
1c
FIG. 6 C 30705 CHECK RAIL LOCK KEEPER
FIG. 7 C 30706 CHECK RAIL LOCK KEEPER
FIG. 8 C 30715 CHECK RAIL LOCK KEEPER
FIG. 9 C 30716 CHECK RAIL LOCK KEEPER
700 west bridge street, owatonna, mn 55060 � 507.451.5620 800.866.7884 � TRUTH.COM
DOUBLE HUNGSLIDER 9200 SASH LOCK & KEEPERS
3
The options available on TruthHardware’s 9200 Series Sash Locks are virtually endless.
• There are bases with or withoutalignment lugs which are helpful inpreventing side shift of the sash (See Truth Tip #1).
• There are various mounting holepatterns from which to choose,which will ensure that your hardwareis located in the most efficientlocation for optimum holding power(See Truth Tip #5).
• A variety of locking cams areavailable that help to pull meetingrails tightly together and willproduce a better seal of the sash atthe head and sill to help decrease airinfiltration. Another reason foroptional cam sizes is to help avoidpotential interference created whenthe cam extends out to far. Refer tothe following drawings to find theone which best meets yourrequirements.
• Based on window design, and thespace allowed for mounting thewindow hardware – some windowsystems are better suited fornarrower keepers, or even face-mounted varieties. The 9200 Serieshas a number of Top Mount, andFace Mount keepers to choose from.
LOGO OPTIONS: For that“personalized touch”, Truth’s 9200Series Check Rail Locks are capable ofaccepting your company’s name orlogo. Truth’s logo reproductionprocess is an attractive way ofhighlighting your company signature.For further details on where yourcompany’s logo would appear, pleaserefer to the following drawings.
WARRANTY:
Protected under the terms of the “Truth Warranty for Window & DoorManufacturers & AuthorizedDistributors”. Refer to Truth’s Terms& Conditions for further details.
MATERIAL: High-pressure,corrosion-resistant, die-cast zinc.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining color
stability for years in direct sunlight.Please refer to Truth’s Color Chart forexamples of Truth’s most popularfinish options. Truth also offers a widerange of decorative “plated” finishes –contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
ORDERING INFORMATION:
1. Choose the 9200 Series Cam Lockstyle desired (specify by part number).
2. Specify finish number.
3. Specify Keeper to be ordered.
RECOMMENDED SCREWS:
Types of screws required determinedby material of profile used (soldseparately). For additional informationon screw selection - see Truth Tips.
TRUTH TIPS:
1. A lock with pick-resistantalignment nibs should be usedwhenever possible. A lock withoutnibs should be chosen when the lugscause interference with divided lightgrills or other window features.
2. A lock with a small cam should beused when the larger sweep radius ofthe .125” (3.2 mm) pull-in cam causesinterference with the glazing or otherareas of the profile. A face-mountedkeeper is usually required.
3. When two locks are used on onewindow, the placement of each lock,with respect to its keeper, becomesvery critical to maintain a constantweatherseal on all sides of the windowand to insure that each lock engagesproperly with its keeper.
4. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended.
5. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended.
6. For metal window profiles, Truthrecommends stainless steel machinescrews. However, in mostapplications, stainless steel sheet metalscrews will provide adequate holdingpower.
INCLUDE TRUTH SPECS ONYOUR NEXT WINDOW PROJECT
Window check rail locks shall beincluded which will increase bothsecurity and weather seal tightness.The lock must provide easy operationand positive locked feel.
Window check rail locks will be ofinternal cam design to provideoptimum pull-in to aid in sealing themeeting rails. The lock andaccompanying keeper will preventmisalignment during locking. The lockand keeper shall be constructed of highpressure zinc alloy die castings.
Window locks shall be 9200 Serieslocks as manufactured by TruthHardware.
9200 SASH LOCK & KEEPERS
3a
2.250 (57.2mm)
2.062 (52.4mm)2.062 (52.4mm)2.156 (54.8mm)
2.250 (57.2mm)2.250 (57.2mm)2.250 (57.2mm)
2.062 (52.4mm)2.062 (52.4mm)2.062 (52.4mm)2.062 (52.4mm)
2.062 (52.4mm)
2.062 (52.4mm)
2.062 (52.4mm)
2.250 (57.2mm)
2.062 (52.4mm)
2.062 (52.4mm)2.156 (54.8mm)
B
LOGO AREA
NIBS NESTING NIBS
RH LH
NIBSHANDING
XXXXXX
X
XX
X
XX
# 8 SCREW# 8 SCREW# 6 SCREW# 6 SCREW# 6 SCREW# 8 SCREW
0.06 (1.5mm)
LOGO AREAA
0.06 (1.5mm)0.06 (1.5mm)0.06 (1.5mm)0.06 (1.5mm)0.06 (1.5mm)
RIGHT HAND SHOWNNO NIBS SHOWN
A09200400A09200401A09200402A09200407A09200409A09200411A09200412A09200416A09200417A09200420A09200427A09200430A09200432A09200441A09200457A09200520A09200537A09200580A09200599
0.390 (9.9mm)0.390 (9.9mm)0.437 (11.1mm)0.687 (17.4mm)0.687 (17.4mm)0.719 (18.3mm)0.437 (11.1mm)0.437 (11.1mm)0.687 (17.4mm)0.687 (17.4mm)0.687 (17.4mm)0.390 (9.9mm)0.390 (9.9mm)0.437 (11.1mm)0.437 (11.1mm)0.687 (17.4mm)0.687 (17.4mm)0.687 (17.4mm)0.719 (18.3mm)
XXXXXXXX
X
XX
X
X
X
X
X
XXX
XX
XXX
XX
# 6 SCREW# 6 SCREW# 6 SCREW# 6 SCREW# 6 SCREW# 8 SCREW# 8 SCREW# 8 SCREW# 8 SCREW# 6 SCREW# 6 SCREW
.187 DIA. RIVET# 6 SCREW
NO PULL-INNO PULL-IN
0.06 (1.5mm)
0.06 (1.5mm)0.06 (1.5mm)0.06 (1.5mm)0.06 (1.5mm)0.06 (1.5mm)0.06 (1.5mm)0.06 (1.5mm)
0.06 (1.5mm)0.06 (1.5mm)
0.06 (1.5mm)
* ALL SCREWS ARE TO BE PHILLIPS FLAT HEAD. (LENGTH AND TYPE TO BE DETERMINED BY PROFILE)
"A" DIMENSION
2.250 (57.2mm)
[72.0 mm]2.836
[25.4 mm]1.000
[11.9 mm].470
[18.7 mm].735
AVAILABLELOGO AREA
LOGO AREA SHOWNFULL SCALE
FIG. 1 SASH LOCK AND KEEPER
NONIBS
NIBS NESTING
NIBSRECOMMENDED
SCREWS * CAMREACH
"B" DIMENSION
PARTNUMBER
9200 SASH LOCK & KEEPERS
3b
FIG. 2 LOCK/KEEPER COMPATIBILITY TABLES
A09200400
C08924C09022C09145C09256C09335C09336C09452C09717C09968C30022
.60----
.59
.57
.60
----
.64
.60----
.89
.87
.89
.93----
.92
.90
.93
.65----
.64
.62
.65
.65----
.64
.62
.65
.90----
.89
.87
.90
----
.89
.90----
.89
.87
.90
.60----
.59
.57
.60
----
.59
.65----
.64
.62
.65
.65----
.64
.62
.65
.90--------.89
.87
.90
------
.89
.90--------.89
.87
.90
.93--------.92
.90
.93
--
.79
.58
.57
.60
.64
.64
-- --
.87
.87
.90
1.08
--
.89
.89 .59
.59
--
.89
.89
--
DIMENSION (HOLE CENTER TO HOLE CENTER-LOCK TO KEEPER)
DIMENSION
C09062
C09312
C09391
C09659
C09697
DCDC
C
C
0.63
C09906
DCD
D
D
C1.080.400.50----
0.650.320.650.85----
0.931.080.700.50----
0.950.320.950.85---- --
--0.850.980.320.98----
0.500.731.080.96
----
0.850.700.320.70----
0.500.501.080.68
----
0.850.680.320.68----0.500.481.080.66
----
0.850.930.320.93----
0.500.681.080.91
----
0.830.950.300.95----
0.480.701.060.93
----
0.850.650.320.65----
0.500.401.080.63
----
0.850.700.320.70----
0.500.451.080.68
----
0.850.700.320.70----
0.500.451.080.68
----
0.850.950.320.95----
0.500.701.080.93
----
0.850.950.320.95----
0.500.701.080.93
0.221.080.890.980.350.980.221.080.520.731.120.96
LOCKS
SURF
ACE
MOU
NT K
EEPE
RS
---- --
---- --
-- -- --------
--
------
----
-- -- --
-- -- -- -- --
-- -- ----
---- --
---- ----
------
--------
----------
--------
--------
--
-- --
-- -- ----
-- ----
-- --
----
FACE
MOU
NT K
EEPE
RS
LOCKS
C
DB
KEEPER
SASHLOCK
CENTER OF SCREW
A09200401A09200402A09200407A09200409A09200411A09200412A09200416A09200417A09200420A09200427A09200430A09200432A09200441A09200457A09200520A09200537A09200580A09200599
"B"
A09200400
A09200409
A09200411
A09200412
A09200416
A09200417
A09200427
A09200430
A09200441
A09200457
A09200520
A09200580
A09200599
FACE MOUNT KEEPER LOCATION
SURFACE MOUNT KEEPER LOCATION
9200 SASH LOCK & KEEPERS
3c
AVAILABLE LOCKS
A09200400
"B"SEE FIG. 2
0.60 (15.2mm)A09200409A09200411A09200412
A09200417A09200427A09200430A09200441A09200457A09200520A09200580A09200599
A09200416
[11.7 mm].460
[72.1 mm]2.840
[53.9 mm]2.124
[8.1 mm].320
[4.1 mm].160
FIG. 3 C08924XX KEEEPER
FIG. 4 C09335XX KEEPER
0.60 (15.2mm)0.93 (23.5mm)0.65 (16.5mm)0.65 (16.5mm)0.90 (22.9mm)
A09200402
"B"SEE FIG. 2
0.64 (16.3mm)A09200420A09200432A09200537
0.90 (22.9mm)0.60 (15.2mm)0.65 (16.5mm)0.65 (16.5mm)0.90 (22.9mm)0.90 (22.9mm)0.93 (23.5mm)
AVAILABLE LOCKS
[57.2 mm]2.250
[7.1 mm].280
[3.5 mm].136
[12.2 mm].480
[72.1 mm]2.840
0.89 (22.6mm)0.59 (15.0mm)0.89 (22.6mm)
RECOMMENDED SCREWS:
(QTY 2) #6 SCREW WITH A #5 HEAD (LENGTH AND THREAD TYPE TO BE DETERMINEDBY PROFILE.)
RECOMMENED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TO BE DETERMINEDBY PROFILE)
LOCK PART
NUMBER
LOCK PART
NUMBER
9200 SASH LOCK & KEEPERS
3d
AVAILABLE LOCKS
A09200402
"B"SEE FIG. 2
0.64 (16.3mm)
FIG. 5 C09452XX KEEEPER
FIG. 6 C09717XX KEEPER
A09200420A09200432A09200537
[57.2 mm]2.250
[6.4 mm].250
[3.0 mm].120
[52.3 mm]2.060
[3.8 mm]2X .150
[72.1 mm]2.840
[13.4 mm].528
[7.7 mm].303
0.87 (22.1mm)0.90 (22.9mm)0.62 (15.7mm)0.62 (15.7mm)0.87 (22.1mm)0.87 (22.1mm)0.57 (14.5mm)0.62 (15.7mm)0.62 (15.7mm)0.87 (22.1mm)0.87 (22.1mm)0.90 (22.9mm)
"B"SEE FIG. 2
A09200409A09200411A09200412
A09200417A09200427A09200430A09200441A09200457A09200520A09200580A09200599
A09200416
AVAILABLE LOCKS
0.57 (14.5mm)A09200400
[7.1 mm].280
[3.6 mm].140
[72.1 mm]2.840 [12.2 mm]
.480
0.89 (22.6mm)0.59 (15.0mm)0.89 (22.6mm)
[3.0 mm]2X .120
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBER
RECOMMENDED SCREWS: (QTY 2) #6 SCREW WITH A #5 HEAD (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBER
9200 SASH LOCK & KEEPERS
3e
AVAILABLE LOCKS
A09200402
"B"SEE FIG. 2
A09200409A09200411A09200412
A09200417
A09200427A09200430
A09200441A09200457A09200520
A09200580A09200599
A09200416
[55.9 mm]2.202
[7.1 mm].280 [3.6 mm]
.140
[6.8 mm]2X .266
[12.2 mm].480
[72.1 mm]2.840
0.64 (16.3mm)0.89 (22.6mm)0.92 (23.4mm)0.64 (16.3mm)0.64 (16.3mm)0.89 (22.6mm)0.89 (22.6mm)0.89 (22.6mm)0.59 (15.0mm)0.59 (15.0mm)0.64 (16.3mm)0.64 (16.3mm)0.89 (22.6mm)0.89 (22.6mm)0.89 (22.6mm)0.92 (23.4mm)
[55.5 mm]2.186
[7.6 mm].300
FIG. 7 C09336XX KEEPER
FIG. 8 C030022XX KEEPER
[3.8 mm].150
[6.4 mm]2X .251
[72.1 mm]2.840
0.59 (15.0mm)A09200400
A09200420
A09200432
A09200537
[12.8 mm].505
[7.6 mm].300
0.89 (22.6mm)0.93 (23.5mm)0.65 (16.5mm)0.65 (16.5mm)0.90 (22.9mm)0.90 (22.9mm)0.60 (15.2mm)0.65 (16.5mm)0.65 (16.5mm)0.90 (22.9mm)0.90 (22.9mm)0.93 (23.5mm)
"B"SEE FIG. 2
A09200409A09200411A09200412
A09200417A09200427A09200430A09200441A09200457A09200520A09200580A09200599
A09200416
AVAILABLE LOCKS
0.60 (15.2mm)A09200400
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBER
LOCK PART
NUMBER
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
9200 SASH LOCK & KEEPERS
3f
FIG. 9 C09022XX KEEPER
AVAILABLE LOCKS
A09200401
"B"SEE FIG. 2
0.60 (15.2mm)A09200407 0.90 (22.9mm)
[57.2 mm]2.250
[8.1 mm].320
[4.1 mm].160
[2.3 mm]2X .090
[72.1 mm]2.840
[12.0 mm].473
[52.4 mm]2.062
[13.1 mm].516
[8.7 mm].344
[72.1 mm]2.840
[12.7 mm].500[7.1 mm]
.278
FIG. 10 C09968XX KEEPER
"B"SEE FIG. 2
1.08 (27.4mm)A09200407
AVAILABLE LOCKS
0.79 (20.1mm)A09200401
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBERRECOMMENDED SCREWS: (QTY 2) #8 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBER
9200 SASH LOCK & KEEPERS
3g
FIG. 11 C09145XX KEEPER
AVAILABLE LOCKS
A09200401
"B"SEE FIG. 2
0.57 (14.5mm)
[54.8 mm]2.156
[6.4 mm].250
[3.1 mm].123
[72.1 mm]2.840
[11.7 mm].460
[7.0 mm].275
A09200407 0.87 (22.1mm)
[57.2 mm]2.250
[72.1 mm]2.840
[6.4 mm].250
[3.1 mm].123
[12.8 mm].505
FIG. 12 C09256XX KEEPER
"B"SEE FIG. 2
0.87 (22.1mm)A09200407
AVAILABLE LOCKS
0.57 (14.5mm)A09200401
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBERRECOMMENDED SCREWS: (QTY 2) #8 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBER
9200 SASH LOCK & KEEPERS
3h
FIG. 13 C09659XX FACE MOUNT KEEPER
[38.1 mm]1.500
[25.4 mm]1.000
[10.1 mm].397
[7.3 mm].289
[6.9 mm].270
[2.4 mm].093
[4.1 mm].160
AVAILABLE LOCKS
A09200400
A09200409
A09200411
A09200412
A09200417
A09200427
A09200430
A09200441
A09200457
A09200520
A09200580
A09200599
A09200416
[44.4 mm]1.750
[22.2 mm].875
[10.3 mm].406
[11.9 mm].467
[33.7 mm]1.326
[3.8 mm].150
[1.8 mm].070
FIG. 14 C09312XX FACE MOUNT KEEPER
A09200400
A09200409
A09200411
A09200412
A09200417
A09200427
A09200430
A09200441
A09200457
A09200520
A09200580
A09200599
A09200416
AVAILABLE LOCKS
[4.8 mm].190
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBER
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBER
9200 SASH LOCK & KEEPERS
3i
FIG. 15 C09697XX FACE MOUNT KEEPER
[38.1 mm]1.500
[6.4 mm].250
[44.4 mm]1.750
[1.8 mm].070
[2.3 mm].090
[6.4 mm].250
[11.5 mm].452 [39.7 mm]
1.562
[6.4 mm].250
[25.4 mm]1.000
FIG. 16 C09062XX FACE MOUNT KEEPER
A09200400
A09200409
A09200411
A09200412
A09200417
A09200427
A09200430
A09200441
A09200457
A09200520
A09200580
A09200599
A09200416
AVAILABLE LOCKS
[38.1 mm]1.500
[21.0 mm].828
[10.1 mm].397
[24.0 mm].944
[5.5 mm].217
[11.0 mm].434
[40.0 mm]1.575
[2.4 mm].093
[4.8 mm].190
A09200400
A09200409
A09200411
A09200412
A09200417
A09200427
A09200430
A09200441
A09200457
A09200520
A09200580
A09200599
A09200416
AVAILABLE LOCKS
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBER
LOCK PART
NUMBER
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS PAN HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
9200 SASH LOCK & KEEPERS
3j
FIG. 17 C09391XX FACE MOUNT KEEPER
[71.1 mm]2.800
[8.1 mm].320
[52.4 mm]2.062
[4.7 mm].185
[6.7 mm]2X .265
[9.4 mm].370
A09200400
A09200409
A09200411
A09200412
A09200417
A09200427
A09200430
A09200441
A09200457
A09200520
A09200580
A09200599
A09200416
AVAILABLE LOCKS
[69.8 mm]2.750
[8.2 mm].322
[52.1 mm]2.052
[4.7 mm].185
[9.4 mm].370
[5.6 mm]2X .221
5.0°
A09200400
A09200409
A09200411
A09200412
A09200417
A09200427
A09200430
A09200441
A09200457
A09200520
A09200580
A09200599
A09200416
AVAILABLE LOCKS FIG. 18 C09906XX FACE MOUNT KEEPER
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBER
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEAD SCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE.)
LOCK PART
NUMBER
9200 SASH LOCK & KEEPERS
3k 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
FIG. 19 41434 FACE MOUNT KEEPER
[5.0 mm].195
[6.2 mm].244
[6.4 mm].250
[25.4 mm]1.000
[26.4 mm]1.041
[3.0 mm].117
[7.0 mm].275
[3.8 mm].151
[38.1 mm]1.500
[50.6 mm]1.994
FIG. 20 41405 KEEPER
[6.4 mm].250
[52.1 mm]2.050
[3.2 mm].125
[6.8 mm].269
[65.7 mm]2.587
[11.2 mm].442
A09200666 .872 (22.1mm) .060 (1.5mm)
A B
RECOMMENDED SCREWS: (QTY2) #6 SHEET METAL SCREWS PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
AVAILABLE LOCKS
DOUBLE HUNG
SLIDER 17 TRIMLINE™
CAM LOCK
4
By pulling meeting rails tightlytogether and by producing a better sealof the sash at the head and sill, theTrimLineTM Cam Lock decreases airinfiltration. And with its new slimmerhandle design, its low profile designhelps assure maximum egress opening.An innovative spring design holds thehandle in both the locked and unlockedpositions while a concealed lockingmechanism protects moving parts fromdust and dirt for added lock life, too.
For locks designed with alignmentlugs, a positive sash alignment featureprevents side shift of the sash. Animproved detent in both the lockingand unlocking motion of the handle,assures that the cam has completed itstravel. Designed for #6 mountingscrews on 2.062” (52.4mm) center-to-center hole spacing on both the lockand keepers. This lock produces a.125” (3.2mm) pull-in {.062” (1.6mm)with small cam} with a .156” (4.0mm)lifting ability.
SECURITY & RELIABILITY:
The pick-resistant design of this lockhelps you exceed the load requirementsfor AAMA 1302.5 Forced EntryResistance Test, the California ModelBuilding Security Ordinance andASTM-588 Forced Entry Test.
LOGO OPTIONS: For that“personalized touch”, Truth’s TrimLineCheck Rail Locks are capable ofaccepting your company’s name orlogo. Truth’s unique custom print logoreproduction process is an attractiveway of highlighting your companysignature. For further details on whereyour company’s logo would appear,please refer to the following drawings.
WARRANTY:
Protected under the terms of the TruthWarranty for Window & DoorManufacturers and AuthorizedDistributors. Refer to Truth’s Terms &Conditions for further details.
MATERIAL: High-pressure,corrosion-resistant, die-cast zinc.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth’s Color Chart for
examples of Truth’s most popularfinish options. Truth also offers a widerange of decorative “plated” finishes -contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
ORDERING INFORMATION:
1. Choose the TrimLine Cam Lockstyle desired (specify by part number).
2. Specify finish number.
3. Select mounting hardware (soldseparately): For Keeper styles, refer toTrimLine(tm) Keeper catalog page forstyles and part numbers.
RECOMMENDED SCREWS:
Types of screws required determinedby material of profile used. Refer todrawings for complete information onscrew type and quantity needed (soldseparately). For additional informationon screw selection - see Truth Tips.
TRUTH TIPS:
1. A lock with pick-resistant alignmentlugs should be used whenever possible.A lock without lugs should be chosenwhen the lugs cause interference withdivided light grills or other windowfeatures.
2. A lock with a small cam should beused when the larger sweep radius ofthe .125” (3.2mm) pull-in cam causesinterference with the glazing or otherareas of the profile. A face-mountedkeeper is usually required.
3. When two locks are used on onewindow, the placement of each lock,with respect to its keeper, becomesvery critical to maintain a constantweatherseal on all sides of the windowand to insure that each lock engagesproperly with its keeper.
4. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended.
5. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended.
6. For metal window profiles, Truthrecommends stainless steel machinescrews. However, in mostapplications, stainless steel sheet metalscrews will provide adequate holdingpower.
INCLUDE TRUTH SPECS ON
YOUR NEXT WINDOW PROJECT
Window check rail locks shall beincluded which will increase bothsecurity and weather seal tightness.The lock must provide easy operationand positive locked feel (detent).
Window check rail locks will be ofinternal cam design to provide .125”(3.2mm) of pull-in to aid in sealing the meeting rails. The lock andaccompanying keeper will prevent mis-alignment during locking. Thelock and keeper shall be constructed ofhigh pressure zinc alloy die castings.
Window locks shall be 17 seriesTrimLine, as manufactured by TruthHardware, Owatonna, MN.
17 TRIMLINE™
CAM LOCK
4a
D
TOP AREA
FRONT AREA
CHECKRAIL
GLASS
[26.2 mm]1.032
A
[52.4 mm]2.062
[65.9 mm]2.594
TOP MOUNTED KEEPER
FACE MOUNTED KEEPER
[41.0 mm]1.616
[11.2 mm].442
[19.7 mm].777
17.32
17.33
17.34
17.35
17.38
17.39
17.40
17.41
17.43
B
.438 (11.1mm)
.688 (17.5mm)
.438 (11.1mm)
.688 (17.5mm)
.438 (11.1mm)
.438 (11.1mm)
.438 (11.1mm)
.688 (17.5mm)
.688 (17.5mm)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
OPPOSITE HAND
ALIGNMENT LUGS
CAM
[52.4 mm]2.062
B
FIG. 1 APPLICATION OF TRIMLINE CHECK RAIL LOCK
FIG. 2 TRIMLINE CHECK RAIL LOCK OPTIONS
"CUSTOM PRINT"LOGO AREAS AVAILABLE
(FULL SCALE)
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS.
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
PRODUCT NUMBER
WITHLUGS
WITHOUTLUGS
LARGECAM
SMALLCAM
SPECIALFEATURES
NOTE:LARGE CAM HAS .125 PULL-IN.SMALL CAM HAS .062 PULL-IN.
700 west bridge street, owatonna, mn 55060 � 507.451.5620 800.866.7884 � TRUTH.COM
DOUBLE HUNG
SLIDER 17 TRIMLINE™
CAM LOCK KEEPERS
5
Truth realizes that each profile in themarketplace today may require its ownparticular Keeper due to the variety ofmounting application possibilities.Because of this, Truth has developed a wide variety of Keepers for ourTrimLineTM Cam Lock whose shapesand styles were designed to help satisfythese needs.
The TrimLineTM Cam Lock Keepers inthe accompanying drawings shouldprovide you with all of the technicalinformation you should require.However, if you wish further technicalassistance in selecting a Keeper, pleasecontact Truth.
WARRANTY:
Protected under the terms of the Truth Warranty for Window & DoorManufacturers & AuthorizedDistributors. Refer to Truth’s Terms & Conditions for further details.
MATERIAL: High-pressure,corrosion-resistant die-cast zinc.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truthís Color Chart forexamples of Truth’s most popularfinish options. Truth also offers a wide range of decorative “plated”finishes – contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
ORDERING INFORMATION:
1. Order Keepers by part number.Refer to lock section for details on A and D dimensions.
2. Specify finish number.
TRUTH TIPS
1. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended.
2. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended.
3. For metal window profiles, Truthrecommends stainless steel machinescrews. However, in mostapplications, stainless steel sheet metalscrews will provide adequate holdingpower.
17 TRIMLINE™
CAM LOCK KEEPERS
5a
FIG. 1 40368.XX KEEPER
[52.4 mm]2.062
[8.4 mm].330
[4.4 mm].174
[65.9 mm]2.593
[13.6 mm].536
FIG. 2 40380.XX KEEPER
[52.4 mm]2.062
[3.9 mm].153
[7.8 mm].309
[65.9 mm]2.594
[11.2 mm].442
FIG. 3 40904.XX KEEPER
[7.9 mm].312
[4.0 mm].156
[65.7 mm]2.586
[11.2 mm].442
[52.4 mm]2.062
17.38 .610 (15.5mm)
A
.860 (21.8mm)17.39
.610 (15.5mm)17.40
.860 (21.8mm)17.41
.610 (15.5mm)17.43
17.32 .610 (15.5mm)
A
.860 (21.8mm)17.33
.610 (15.5mm)17.34
.860 (21.8mm)17.35
17.32 .610 (15.5mm)
A
.860 (21.8mm)17.33
.610 (15.5mm)17.34
.860 (21.8mm)17.35
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS FLAT HEAD, SHEET METAL SCREWS
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO DETERMINED BY PROFILE)
AVAILABLE LOCKS
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS FLAT HEAD, SHEET METAL SCREWS
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS FLAT HEAD, SHEET METAL SCREWS
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO DETERMINED BY PROFILE)
AVAILABLE LOCKS
AVAILABLE LOCKS
17 TRIMLINE™
CAM LOCK KEEPERS
5b
[44.4 mm]1.749
[22.3 mm].876
[7.9 mm].312
[33.5 mm]1.317
[4.0 mm].156
FIG. 4 40375.XX TRIMLINE KEEPER
FIG. 5 41298.XX TRIMLINE KEEPER
FIG. 6 40670.XX TRIMLINE KEEPER
17.38
17.39
D
17.40
17.41
17.43
.348 (8.9mm)
D
1.062 (27.0mm)
D
[25.4 mm]1.000
[45.0 mm]1.770
[2.3 mm].090
[4.3 mm].170
[4.6 mm].182
D
.864 (21.8mm)
D
[38.4 mm]1.510
[4.3 mm].170
[26.4 mm]1.037
[11.5 mm].453
[2.5 mm].100
[4.6 mm].182
D
[11.1 mm].436
E
[12.7 mm].500
.562 (14.3mm)
E
AVAILABLE LOCKS
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS FLAT HEAD, SHEET METAL SCREWS
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO DETERMINED BY PROFILE)
NOTE:
LOCKS WITHLARGER CAM MAYINTERFERE WITH GLASS
AVAILABLE LOCKS
RECOMMENDED SCREWS:
WOOD: (QTY 2) #10 X .750 PHILLIPS PAN HEAD, SHEET METAL SCREWS
PVC/METAL: (QTY 2) #10 PHILLIPS, PAN HEAD SCREWS (LENGTH AND THREAD TYPE TO DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS FLAT HEAD, SHEET METAL SCREWS
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO DETERMINED BY PROFILE)
ALLTRIMLINE LOCKS
AVAILABLE LOCKS
ALLTRIMLINE LOCKS
NOTE:
LOCKS WITHLARGER CAM MAYINTERFERE WITH GLASS
NOTE:
LOCKS WITHLARGER CAM MAYINTERFERE WITH GLASS
17 TRIMLINE™
CAM LOCK KEEPERS
5c
FIG. 7 45076.XX KEEPER (narrow flat base)
FIG. 8 45184.XX KEEPER (narrow flat base)
[54.8 mm]2.156
[6.7 mm]
.265
[3.2 mm]
.125
[11.2 mm]
.442
[52.4 mm]
2.062
[6.4 mm].250
[3.2 mm]
.125
[11.6 mm]
.457
[65.9 mm]2.594
[65.9 mm]
2.594
17.39
17.40
.812 (20.6mm)
.562 (14.3mm)
A
17.33
17.34
.828 (21.0mm)
.578 (14.7mm)
A
RECOMMENDED SCREWS:
WOOD: (QTY 2) #6 WITH A #5 HEAD X .750 PHILLIPS FLAT HEAD, SHEET METAL SCREWS.
PVC/METAL: (QTY 2) #6 WITH A #5 HEAD PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO DETERMINED BY PROFILE)
AVAILABLE LOCKS
RECOMMENDED SCREWS:
WOOD: (QTY 2) #6 WITH A #4 HEAD X .750 PHILLIPS FLAT HEAD, SHEET METAL SCREWS.
PVC/METAL: (QTY 2) #6 WITH A #4 HEAD PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO DETERMINED BY PROFILE)
AVAILABLE LOCKS
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
One of the most popular locking designsin the slider and single/double-hungmarkets, Truth Hardware’s 9400 SeriesSash Lock is one of the most reliableproducts available.
• Concealed locking mechanisms helpprotect moving parts from dust anddirt for added lock life whileproducing a better seal of the sash at the head and sill.
• The internal cam eliminatesunsightly paint abrasions caused bythe interaction of cam and keeper.
• The internal cam’s are “handed” andcome in various sizes that relate tothe amount of pull-in/reach-out andsash lift. These “lock-up”characteristics produce a better sealof the sash at the head and sill tohelp decrease air infiltration.
• The location of the mounting holeson the base are designed to securethe lock in a position along the checkrail which affords the most holdingpower (See Truth Tip #4).
• These locks are available with orwithout alignment lugs. These lugshave been designed to help preventshifting of the rails during lockingfor an enhanced window seal.Tapered “nesting” lugs, which helpguide the lock to the keeper are alsoan option.
WARRANTY:
Protected under the terms of the “TruthWarranty for Window & DoorManufacturers & AuthorizedDistributors”. Refer to Truth’s Terms& Conditions for further details.
LOGO OPTIONS: For that“personalized touch”, Truth’s 9400Series Sash Locks are capable ofaccepting your companyís name orlogo. Truth’s logo reproductionprocesses is an attractive way ofhighlighting your company signature.
MATERIAL: High-pressure, corrosionresistant, die-cast zinc.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.
DOUBLE HUNG
SLIDER 9400 SASH LOCK & KEEPERS
6
Please refer to Truth’s Color Chart forexamples of Truth’s most popularfinish options. Truth also offers a widerange of decorative “plated” finishes –contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
ORDERING INFORMATION:
1. Identify the style of “base” desired(specify by part number).
2. Identify the style of “cam” desired.Note these cams are “handed” (specifyby part number).
3. Order the 9400 Series assembledbase unit that has this configuration.Truth Hardware Sales Team can helpyou identify this part number.
4. Order the 9400 Series style of“keeper” desired (specify by partnumber).
5. Specify finish choice.
RECOMMENDED SCREWS:
Types of screws required determinedby material of profile used (soldseparately). For additional informationon screw selection – see Truth Tips.
TRUTH TIPS:
1. A lock with pick-resistantalignment lugs should be usedwhenever possible. A lock withoutlugs should be chosen when the lugscause interference with divided lightgrills or other window features.
2. When two locks are used on onewindow, the placement of each lock,with respect to its keeper, becomesvery critical to maintain a constantweatherseal on all sides of the windowand to insure that each lock engagesproperly with its keeper.
3. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended.
4. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended.
5. For metal window profiles, Truthrecommends stainless steel machinescrews. However, in mostapplications, stainless steel sheet metalscrews will provide adequate holdingpower.
INCLUDE TRUTH SPECS ON
YOUR NEXT WINDOW PROJECT
Window check rail locks shall beincluded which will increase bothsecurity and weather seal tightness.The lock must provide easy operationand positive locked feel.
Window check rail locks will be ofinternal cam design to provideoptimum sealing of the meeting rails.The lock and accompanying keeperwill prevent misalignment duringlocking. The lock and keeper shall beconstructed of high pressure zinc alloydie castings.
Window locks shall be 9400 SeriesSash Locks as manufactured by TruthHardware.
9400 SASH LOCK & KEEPERS
6a
RH LH
NIBSHANDING
A09400400
A09400401
A09400444
X
X
X
X
X
X
[28.4 mm]1.120
[43.2 mm]1.700
[20.8 mm].820
[65.5 mm]2.578
[52.4 mm]2.062
[11.1 mm].437
NIBS NESTING NIBS
RIGHT HAND SHOWN
FIG. 1 SASH LOCK AND KEEPER
CAM PULL-IN .060
[3.9 mm].155
[7.9 mm].310[52.4 mm]
2.062
[65.5 mm]2.578
[12.8 mm].505
FIG. 2 C09405.XX KEEPER
A09400400
PARTNUMBER
NONIBS
NIBS
NESTING NIBS
RECOMMENDED SCREWS: WOOD: (QTY 2) (P/N 19050) #6 X .750
PHILLIPS FLAT HEAD SHEET METAL SCREWS
PVC/METAL: (QTY 2) #6 PHILLIPS FLAT HEAD
SCREW (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
AVAILABLE LOCKS
RECOMMENDED SCREWS: WOOD: (QTY 2) (P/N 19050) #6 X .750
PHILLIPS FLAT HEAD SHEET METAL SCREWS
PVC/METAL: (QTY 2) #6 PHILLIPS FLAT HEAD
SCREW (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
9400 SASH LOCK & KEEPERS
6b
FIG. 3 C09603.XX KEEPER
[52.4 mm]2.062
[7.9 mm].310
[3.9 mm].155
[65.5 mm]2.578
[12.8 mm].505
[54.0 mm]2.126
[7.9 mm].312
[4.0 mm].156
[9.5 mm].375 [72.1 mm]
2.840[14.6 mm]
.575[19.2 mm]
.755
FIG. 4 C30063.XX KEEPER
A09400401
A09400444
[54.0 mm]2.125
[5.7 mm].223
[5.8 mm].226
[65.5 mm]2.578
[12.8 mm].505
[8.9 mm].350
AVAILABLE LOCKSRECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS FLAT HEAD SHEET METAL SCREWS PVC/METAL: (QTY 2) #6 PHILLIPS FLAT HEAD SCREW (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
AVAILABLE LOCKS
RECOMMENDED SCREWS: WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS FLAT HEAD SHEET METAL SCREWS PVC/METAL: (QTY 2) #6 PHILLIPS FLAT HEAD SCREW (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
(QTY 2)#6 SHEET METAL SCREWS WITH#5 HEAD, PHIILIPS FLAT HEADSCREWS. (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE)
FIG. 5 41404 KEEPER
9400 SASH LOCK & KEEPERS
6c 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG
SLIDER 17 ENTRYGARD®II
CAM LOCK
7
Designed for use on slider andsingle/double-hung windows, theEntryGard® and EntryGard II CamLock’s concealed locking mechanismshelp protect moving parts from dustand dirt for added lock life whileproducing a better seal of the sash atthe head and sill. The internal cameliminates paint abrasions and producesa .125” (3.2 mm) pull-in with a .156”(4.0 mm) lifting ability. Air infiltrationhas been substantially reduced bypulling the meeting rails tightly together.
ENTRYGARD®
II
The EntryGard II Check Rail Lockfeatures a sleek and stylish new handledesign, and has been designed such thatthe lock’s back plate could be eliminatedwithout compromising the strength orperformance of this product. Animproved detent in the handle motion ofthe EntryGard II, assures the user thatthe cam is either fully open or closed.
ENTRYGARD®
SNAP-BACK
LOCK
This double hung/slider lock has theability to retract the cam when thehandle motion is within approximately30 degrees of the open position. Thespring action of the handle and the camwill eliminate exposing the cam whenin the partially open position, thusavoiding interference with divided lightgrilles and/or crashing on the top rail.
These locks are available with orwithout alignment lugs. These lugshave been designed to help preventshifting of the rails during locking foran enhanced window seal. Spring actionholds handle in locked or unlockedposition to prevent damage to windows.
SECURITY & RELIABILITY:
The pick-resistant design of this lockhelps you exceed the load requirementsfor AAMA 1302.5 Forced EntryResistance Test, the California ModelBuilding Security Ordinance andASTM-588 Forced Entry Test.
Additional Keepers for special profileapplications are also available - refer toEntryGard Keeper page for furtherinformation.
WARRANTY: Protected under theterms of the Truth Warranty for Window& Door Manufacturers & AuthorizedDistributors. Refer to Truth’s Terms &
Conditions for further details.
LOGO OPTIONS: For that“personalized touch”, Truth’s EntryGardCheck Rail Locks are capable ofaccepting your company’s name orlogo. Truth’s unique custom print logoreproduction processes is an attractiveway of highlighting your companysignature. For further details on whereyour company’s logo would appear,please refer to the following drawings.
MATERIAL: High-pressure, corrosionresistant, die-cast zinc.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth’s Color Chart forexamples of Truth’s most popular finishoptions. Truth also offers a wide rangeof decorative “plated” finishes –contact Truth for additional informationon availability of these finishes onspecific product lines.
ORDERING INFORMATION:
1. Choose cam lock style desired (seetable below).
2. Specify finish number.
3. Select mounting hardware required(sold separately): For Keeper styles -see EntryGard Keeper section.
RECOMMENDED SCREWS:
Types of screws required determined bymaterial of profile used. Refer todrawings for complete information onscrew type and quantity needed (soldseparately). For additional informationregarding screw selection, refer toEntryGard® Keeper catalog page forstyles and part numbers.
TRUTH TIPS:
1. A lock with pick-resistant alignment
lugs should be used whenever possible.A lock without lugs should be chosenwhen the lugs cause interference withdivided light grills or other windowfeatures.
2. When two locks are used on onewindow, the placement of each lock,with respect to its keeper, becomes verycritical to maintain a constantweatherseal on all sides of the windowand to insure that each lock engagesproperly with its keeper.
3. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended.
4. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended.
5. For metal window profiles, Truthrecommends stainless steel machinescrews. However, in most applications,stainless steel sheet metal screws willprovide adequate holding power.
INCLUDE TRUTH SPECS ON
YOUR NEXT WINDOW PROJECT
Window check rail locks shall beincluded which will increase bothsecurity and weather seal tightness.The lock must provide easy operationand positive locked feel (detent).
Window check rail locks will be ofinternal cam design to provide .125”(3.2 mm) of pull-in to aid in sealing themeeting rails. The lock andaccompanying keeper will prevent mis-alignment during locking. The lockand keeper shall be constructed of highpressure zinc alloy die castings.
Window locks shall be 17 seriesEntryGard® as manufactured by Truth
17 ENTRYGARD®II
CAM LOCK
7a
17.92 .688 (17.5mm) EG II1.875 (47.6mm) X
CAM
ALIGNMENTLUGS
B
C
TOP AREA
FRONT AREA
[65.9 mm]2.593
CHECKRAIL
GLASS
[28.6 mm]1.125
A
[52.3 mm]2.061
SURFACE MOUNTED KEEPER
FACE MOUNTED KEEPER
[41.3 mm]1.624
[12.7 mm].500
[21.4 mm].844
17.67
17.68
17.70
17.74
17.19
17.23
17.30
17.31
B
.438 (11.1mm)
.688 (17.5mm)
FIG. 1 APPLICATION OF TRUTH ENTRYGARD AND ENTRYGARD II CHECK RAIL LOCK
FIG. 2 ENTRYGARD AND ENTRYGARD II CHECK RAIL LOCKS
.688 (17.5mm)
C
1.875 (47.6mm)
1.875 (47.6mm)
2.062 (52.4mm)
X
X
X
X
X
X
X
X
TYPE
EG II
EG II
EG
EG
EG
EG
EG
EG
SNAP BACK LOCK
SNAP BACK LOCK
D
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #7 X .750 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS.
PVC/METAL: (QTY 2) #7 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
PRODUCT NUMBER
SPECIALFEATURES
WITHLUGS
"CUSTOME PRINT"LOGO AREAS AVAILABLE
(FULL SCALE)
PRODUCT NUMBER
SPECIALFEATURES
NOTE:
ALL LOCKS HAVE .125 PULL-IN.
WITHLUGS
WITHOUT LUGS
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNG
SLIDER 17 ENTRYGARD®
CAM LOCK KEEPERS
8
There is a wide variety of profiles inthe marketplace today, and with eachof these, there is the potential for aunique mounting application. No oneKeeper will work in every situationand because of this, Truth hasdeveloped a wide variety of shapes andstyles to help meet these needs. TheKeepers in the accompanying drawingsrepresent all of the Keepers that Truthhas developed for use with theEntryGard® Cam Locks. Thesedrawings should provide you with allthe technical information you mayrequire. However, if you wish furthertechnical assistance in selecting aKeeper, please contact Truth.
WARRANTY:
Protected under the terms of the Truth Warranty for Window & DoorManufacturers & AuthorizedDistributors. Refer to Truth’s Terms & Conditions for further details.
MATERIAL: High-pressure, corrosionresistant, die-cast zinc.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth’s Color Chart forexamples of Truth’s most popularfinish options. Truth also offers a wide range of decorative “plated”finishes – contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
RECOMMENDED SCREWS:
Types of screws required determinedby material of profile used. Refer todrawings for complete information onscrew type and quantity needed (soldseparately). For additional informationregarding screw selection - see TruthTips.
ORDERING INFORMATION:
1. Order Keepers by part number.Refer to lock section for details on A and D dimensions.
2. Specify finish number.
TRUTH TIPS:
1. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended.
2. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended.
3. For metal window profiles, Truthrecommends stainless steel machinescrews. However, in mostapplications, stainless steel sheet metalscrews will provide adequate holdingpower.
17 ENTRYGARD®
CAM LOCK KEEPERS
8a
FIG. 1 40670.XX KEEPER (face mounted)
[44.4 mm]1.749
[4.0 mm].156
D[7.9 mm].312
[22.3 mm].876
17.23
D
17.31
17.66 .348 (8.8mm)
17.67
17.70
D
.864 (21.9mm)
[2.0 mm].080
[33.5 mm]1.318
FIG. 2 40375.XX KEEPER (face mounted)
FIG. 3 41298.XX KEEPER (face mounted)
[4.6 mm].182
[38.4 mm]1.510
[2.5 mm].100
[11.1 mm].436
D[4.3 mm].170
[26.4 mm]1.037
[11.5 mm].453
D
.864 (21.9mm)
[4.6 mm].182
D
[25.4 mm]1.000
[4.3 mm].170
[45.0 mm]1.770
[2.3 mm].090
E
[12.7 mm].500
.562 (14.3mm)
E
AVAILABLE LOCKS
AVAILABLE LOCKS
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS,FLAT HEAD SHEET METAL SCREWS
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
WOOD: (QTY 2) #10 X .750 PHILLIPS, PAN HEAD SHEET METAL SCREWS
PVC/METAL: (QTY 2) #10 PHILLIPS, PAN HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS,FLAT HEAD SHEET METAL SCREWS
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
ALLENTRYGARD
LOCKS
AVAILABLE LOCKS
ALLENTRYGARD
LOCKS
NOTE:
CAM MAY INTERFEREWITH GLASS
NOTE:
CAM MAY INTERFEREWITH GLASS
NOTE:
CAM MAY INTERFEREWITH GLASS
17 ENTRYGARD®
CAM LOCK KEEPERS
8b
FIG. 4 40715.XX KEEPER (wide base and slant top)
[52.4 mm]2.062
[13.6 mm].536
[11.1 mm].438
[6.4 mm].250
[65.5 mm]2.578
17.19
A
.704 (17.9mm)
17.30 .954 (24.2mm)
17.68 .704 (17.9mm)
17.69 .704 (17.9mm)
17.74 .704 (17.9mm)
17.19
A
.704 (17.9mm)
17.30 .954 (24.2mm)
17.68 .704 (17.9mm)
17.69 .704 (17.9mm)
17.74 .704 (17.9mm)
17.19
A
.704 (17.9mm)
17.30 .954 (24.2mm)
17.68 .704 (17.9mm)
17.69 .704 (17.9mm)
17.74 .704 (17.9mm)
FIG. 5 45070.XX KEEPER (flat base, beveled edge, slotted holes)
[52.3 mm]2.060
[6.9 mm].270
[3.4 mm].135
[65.9 mm]2.594
[13.7 mm].538
FIG. 6 45131.XX KEEPER (narrow flat base)
[52.3 mm]2.060
[7.9 mm].312
[4.0 mm].156
[13.6 mm].536
[65.8 mm]2.590
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19100) #7 X .750 PHILLIPS,FLAT HEAD SHEET METAL SCREWS
PVC/METAL: (QTY 2) #7 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
AVAILABLE LOCKS
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19100) #7 X .750 PHILLIPS,FLAT HEAD SHEET METAL SCREWS
PVC/METAL: (QTY 2) #7 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS,FLAT HEAD SHEET METAL SCREWS
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
AVAILABLE LOCKS
AVAILABLE LOCKS
17 ENTRYGARD®
CAM LOCK KEEPERS
8c
FIG. 7 40320.XX KEEPER (notched narrow base)
[52.4 mm]2.062
[7.9 mm].311
[4.0 mm].156
[65.9 mm]2.594
[13.5 mm].531
17.23
A
17.3117.66
17.67
17.70
17.19
A
17.3017.68 .610 (15.5mm)
17.74
FIG. 8 40367.XX KEEPER (without alignment lug slots)
[52.3 mm]2.061
[11.2 mm].440
[6.4 mm].250
[65.8 mm]2.590
[13.5 mm].530
.860 (21.8mm)
.610 (15.5mm)
.610 (15.5mm)
.954 (24.2mm)
.704 (17.9mm)
.704 (17.9mm)
.704 (17.9mm)
.704 (17.9mm)
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #6 X .750 PHILLIPS,FLAT HEAD SHEET METAL SCREWS
PVC/METAL: (QTY 2) #6 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
WOOD: (QTY 2) (P/N 19050) #7 X .750 PHILLIPS,FLAT HEAD SHEET METAL SCREWS
PVC/METAL: (QTY 2) #7 PHILLIPS, FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
AVAILABLE LOCKS
AVAILABLE LOCKS
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNGSLIDER 17.04 SASH LOCK
9
Modeled after Truth’s popular 9400and EntryGard Series sash locks, the17.04 Series Lock is an excellentoption for either single or double-hungstyle windows. Designed with aslightly different mounting hole patternthan its predecessors, the 17.04 isdesigned easily adaptable to mostwindow profiles in the market today.
• Concealed locking mechanisms helpprotect moving parts from dust and dirtfor added lock life while producing abetter seal of the sash at the head and sill.
• The internal cam eliminates unsightlypaint abrasions caused by theinteraction of cam and keeper.
• These locks are available with orwithout alignment lugs. These lugshave been designed to help preventshifting of the rails during locking foran enhanced window seal. Tapered“nesting” lugs, which help guide thelock to the keeper are also an option.
WARRANTY: Protected under theterms of the "Truth Warranty forWindow & Door Manufacturers &Authorized Distributors". Refer toTruth’s Terms & Conditions for furtherdetails.
LOGO OPTIONS: For that"personalized touch", Truth’s 17.04Series Sash Locks are capable ofaccepting your company’s name orlogo. Truth’s logo reproductionprocesses is an attractive way ofhighlighting your company signature.
MATERIAL: High-pressure, corrosionresistant, die-cast zinc.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth’s Color Chart forexamples of Truth’s most popularfinish options. Truth also offers a widerange of decorative “plated” finishes –contact Truth for additional informationon availability of these finishes onspecific product lines.
ORDERING INFORMATION:1. Order a 17.04 Series Lock.
2. Order the 17.04 Series style of“keeper” desired (specify by partnumber).
3.Specify finish choice.
RECOMMENDED SCREWS:Types of screws required determinedby material of profile used (soldseparately). For additional informationon screw selection – see Truth Tips.
TRUTH TIPS:1. A lock with pick-resistantalignment lugs should be usedwhenever possible. A lock withoutlugs should be chosen when the lugscause interference with divided lightgrills or other window features.
2. When two locks are used on onewindow, the placement of each lock,with respect to its keeper, becomesvery critical to maintain a constantweatherseal on all sides of the windowand to insure that each lock engagesproperly with its keeper.
3. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended.
4. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended.
5. For metal window profiles, Truthrecommends stainless steel machinescrews. However, in most applications,stainless steel sheet metal screws willprovide adequate holding power.
INCLUDE TRUTH SPECS INYOUR NEXT WINDOW PROJECTWindow check rail locks shall beincluded which will increase bothsecurity and weather seal tightness.The lock must provide easy operationand positive locked feel.
Window check rail locks will be ofinternal cam design to provideoptimum sealing of the meeting rails.The lock and accompanying keeperwill prevent misalignment duringlocking. The lock and keeper shall beconstructed of high pressure zinc alloydie castings.
Window locks shall be 17.04 SeriesSash Locks as manufactured by TruthHardware.
17.04 SASH LOCK
9a
PRODUCTNUMBER
SCREW HOLESETBACK
WITH NESTINGNIBS
WITHOUT NESTINGNIBS
17.04.XX.100
17.04.XX.110
17.04.XX.200
17.04.XX.203
17.04.XX.204
.687"
.687"
.687"
.437"
.437"
X
X
X
X
X
RECOMMENDED SCREWS:
WOOD: (QTY2) (P/N 19100) #7 X .750 PHILLIPS,FLAT HEAD, SHEET METAL SCREWS
PVC/METAL: (QTY 2) #7 PHILLIPS, FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TO BE DETERMINEDBY PROFILE)
TOP MOUNTED KEEPER
FIG. 1 APPLICATION OF TRUTH 17.04
2.202in55.9mm
2.062in52.4mm
2.835in72.0mm
1.140in29.0mm
1.786in45.4mm
.810in20.6mm.460in
11.7mm
CHECK RAIL
GLASS
GLASS
FIG. 1 APPLICATION OF TRUTH 17.04
17.04 SASH LOCK
9b
1.06327.0
FIG. 3 C09417 KEEPER
FIG. 4 41807 KEEPER
FIG. 5 C09213 KEEPER
FIG. 2 C09336 KEEPER
AVAILABLELOCKS A17.04.XX.100 .827 (21.0mm)
17.04.XX.110 .827 (21.0mm)
17.04.XX.200 .827 (21.0mm)
17.04.XX.203 .577 (14.7mm)
17.04.XX.204 .577 (14.7mm)
AVAILABLELOCKS A17.04.XX.100 .814 (20.7mm)
17.04.XX.110 .814 (20.7mm)
17.04.XX.200 .814 (20.7mm)
17.04.XX.203 .561 (14.2mm)
17.04.XX.204 .561 (14.2mm)
AVAILABLELOCKS A17.04.XX.100 .842 (21.4mm)
17.04.XX.110 .842 (21.4mm)
17.04.XX.200 .842 (21.4mm)
17.04.XX.203 .592 (15.0mm)
17.04.XX.204 .592 (15.0mm)
AVAILABLELOCKS A17.04.XX.100 .832 (21.3mm)
17.04.XX.110 .832 (21.1mm)
17.04.XX.200 .832 (21.1mm)
17.04.XX.203 .582 (14.8mm)
17.04.XX.204 .582 (14.8mm)
2.20255.9.280
7.1
.1403.6
RECOMMENDED SCREWS:
(QTY 4) #6 PHILLIPS FLAT HEAD, SHEET METAL SCREWS(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
(QTY 4) #4 PHILLIPS FLAT HEAD, SHEET METAL SCREWS(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
(QTY 4) #6 PHILLIPS FLAT HEAD, SHEET METAL SCREWS(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
(QTY 4) #6 PHILLIPS FLAT HEAD, SHEET METAL SCREWS(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
.48012.2
2.84072.1
.50512.8
2.84072.1
2.25057.2
.2506.4
.1273.2
.3127.9 .155
3.9
.79520.2
2.84072.1
.1303.3
1.00025.4
.1804.57
1.05026.7
FIG. 2 C09336 KEEPER
FIG. 3 C09417 KEEPER
FIG. 4 41807 KEEPER
FIG. 5 C09213 KEEPER
17.04 SASH LOCK
9c 700 WEST BRIDGE STREET, OWATONNA, MN 55060 � 507.451.5620 800.866.7884 � TRUTH.COM
DOUBLE HUNG
SLIDER 9900 SASH LOCK
10
Truth Hardware’s “stealth” lock has itshousing hidden inside the sash for theultimate in low profile lockingsystems.
• The fasteners are installed from the front face of the locks’ base and keeper, thereby eliminatingeverything except the handle fromview.
• Totally concealed lockingmechanism helps protect movingparts from dust and dirt fromaccumulating.
WARRANTY:
Protected under the terms of the “Truth Warranty for Window & DoorManufacturers & AuthorizedDistributors”. Refer to Truth’s Terms& Conditions for further details.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth’s Color Chart forexamples of Truth’s most popularfinish options. Truth also offers a wide range of decorative “plated”finishes – contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
MATERIAL: High pressure,corrosion-resistant, die-cast zinc.
RECOMMENDED SCREWS:
Refer to drawings for completeinformation on screw type and quantityneeded (sold separately).
ORDERING INFORMATION:
1. Order 9900 Series Sash Lock
2. Select keeper style needed (order by item number)
3. Specify finish choice.
TRUTH TIPS:
1. When two locks are used on onewindow, the placement of each lock,with respect to its keeper, becomesvery critical to maintain a constantweatherseal on all sides of the windowand to insure that each lock engagesproperly with its keeper.
INCLUDE TRUTH SPECS ON
YOUR NEXT WINDOW PROJECT
Window check rail locks shall beincluded which will increase bothsecurity and weather seal tightness.The lock must provide easy operationand positive locked feel, while beinglow in profile to improve the windowsappearance.
Window check rail locks will be ofinternal cam design to provideoptimum pull-in to aid in sealing themeeting rails. The lock and keepershall be constructed of high pressurezinc alloy die castings.
Window locks shall be 9900 SeriesSash Lock as manufactured by TruthHardware.
9900 SASH LOCK
10a
9900 SASH LOCK
10b
[8.1 mm].320 [71.1 mm]
2.800
[9.4 mm].370
[52.4 mm]2.062
[4.7 mm].185
[80.8 mm]3.180
[8.1 mm].320
[52.4 mm]2.062
[4.7 mm].185 [14.1 mm]
.556
[69.8 mm]2.750
[8.2 mm].322
[52.1 mm]2.052
[4.7 mm].185
5°
[9.4 mm].370
A09900402A09900404
FIG. 5 9391 KEEPER
FIG. 6 9703 KEEPER
A09900408
A09900402A09900404A09900408
A09900402A09900404A09900408
A09930402 LOCK ASSEMBLY
A09900402A09900404A09900408
[10.1 mm].396
[69.8 mm]2.749
[3.9 mm].155
[44.4 mm]1.750
[4.2 mm].164
[2.0 mm].080
[31.7 mm]1.249
FIG. 7 9906 KEEPER
FIG. 8 43039 KEEPER
RECOMMENDED SCREWS: (QTY 2) #6 PHILLIPS FLAT HEADSCREWS (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE
AVAILABLE LOCKS
RECOMMENDED SCREWS:
(QTY 2) #6 PHILLIPS FLAT HEADSCREWS (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE
RECOMMENDED SCREWS:
(QTY 2) #6 PHILLIPS FLAT HEADSCREWS (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE
AVAILABLE LOCKS
AVAILABLE LOCKS
RECOMMENDED SCREWS: (QTY 2) #6 SHEET METAL SCREWSPHILLIPS FLAT HEAD SCREWS (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE
AVAILABLE LOCKS
9900 SASH LOCK
10c 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNGSLIDER 9950 LOCK WITH
CONCEALED KEEPER
11
Engineered with a fresh new style and a streamline design that conceals thekeeper under the housing, Truth’s 9950Series Lock and Keepers are a uniqueway to accent your window. WARRANTY: Protected under theterms of the “Truth Warranty forWindow & Door Manufacturers &Authorized Distributors”. Refer toTruth’s Terms & Conditions for furtherdetails.MATERIAL: High-pressure,corrosion-resistant, die-cast zinc.FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth’s Color Chart forexamples of Truth’s most popular finishoptions. Contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
ORDERING INFORMATION:1. Choose the 9950 series lock required.See drawings for available options.2. Order the 9954 series keeper.3. Specify finish choice.
RECOMMENDED SCREWS: Types of screws required determined by material of profile used. Refer todrawings for complete information onscrew type and quantity needed (soldseparately). For additional informationon screw selection - see Truth Tips.
TRUTH TIPS: 1. When two locks are used on onewindow, the placement of each lock,with respect to its keeper, becomes very critical to maintain a constantweatherseal on all sides of the windowand to insure that each lock engagesproperly with its keeper. 2. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended. 3. For vinyl window applications,mounting screws should pass through
two PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended. 4. For metal window profiles, Truthrecommends stainless steel machinescrews. However, in most applications,stainless steel sheet metal screws willprovide adequate holding power.INCLUDE TRUTH SPECS ONYOUR NEXT WINDOW PROJECTWindow check rail locks shall beincluded which will increase bothsecurity and weather seal tightness.The lock must provide easy operationand positive locked feel. The keepershould be concealed under the housingof the lock.Window check rail locks will be ofinternal cam design to provide optimumpull-in to aid in sealing the meetingrails. The lock and accompanyingkeeper will prevent mis-alignmentduring locking. The lock and keepershall be constructed of high pressurezinc alloy die castings.Window locks shall be 9950 Serieslocks as manufactured by TruthHardware.
9950 LOCK WITH CONCEALED KEEPER
11a
LOGO AREA
FIG. 1 A09950400XX SASH LOCK
FIG. 2 A09950401XX SASH LOCK
FIG. 3 C09954XX CONCELED KEEPER
LOGO AREA
[57.2 mm]2.250
[42.1 mm]1.656
[31.9 mm]1.257
[16.3 mm].640
AVAILABLE LOGO AREA
[11.0 mm].432
[71.4 mm]2.812
[17.1 mm].674
LOGO AREA
[57.2 mm]2.250
[42.1 mm]1.656
[31.9 mm]1.257
[21.6 mm].850
AVAILABLE LOGO AREA
[11.0 mm].432
[71.4 mm]2.812
[17.1 mm].674
LOGO AREA
[57.2 mm]2.250
[7.1 mm].280
[3.6 mm].140
[71.6 mm]2.818
[8.6 mm].340
LOGO AREA SHOWN FULL SCALE
RECOMMENDED SCREW:
(QTY 2) #6 PHILLIPS FLAT HEAD SCREW (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREW:
(QTY 2) #6 PHILLIPS FLAT HEAD SCREW (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREW:
(QTY 2) #6 SCREW WITH A #5 HEAD (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
LOGO AREA SHOWN FULL SCALE
700 WEST BRIDGE STREET, OWATONNA, MN 55060 � 507.451.5620 800.866.7884 � TRUTH.COM
DOUBLEHUNGSLIDER 30590 CAM GARD LOCK
12
Stylish new design to the housing hasmade this lock a popular upgrade fromthose using the 7538 Series Sash Locks.As with its predecessor, the 30590 stillhas the following features which madeit one of the industry’s best:
• Streamlined low profile handle foldssnugly against the housing producinga clean appearance, and helps toeliminate interference in shipping.
• One-piece box construction springprovides a strong detent in handlemovement, thus assuring thehomeowner that the handle hascompleted its travel.
• Available in either left- or right-hand,Truth’s Cam Gard Lock is built witha base plate to help improve itsforced entry resistance (FER).
• 30590 latches are designed to becompatible with specific keepers that will help produce the optimumengagement between lock andkeeper.
WARRANTY: Protected under theterms of the “Truth Warranty forWindow & Door Manufacturers &Authorized Distributors”. Refer toTruth’s Terms & Conditions for furtherdetails.
MATERIAL: High-pressure,corrosion-resistant, die-cast zinc.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth’s Color Chart forexamples of Truth’s most popular finishoptions. Truth also offers a wide rangeof decorative “plated” finishes –contact Truth for additional informationon availability of these finishes onspecific product lines.
ORDERING INFORMATION:
1. Refer to the following drawing foritem number information for the CamGard Lock you require. (Note: theselocks are “handed”)
2. Order the keeper style required.
3. Specify finish choice.
RECOMMENDED SCREWS:
Types of screws required determined bymaterial of profile used (soldseparately). For additional informationon screw selection - see Truth Tips.
TRUTH TIPS:
1. When two locks are used on onewindow, the placement of each lock,with respect to its keeper, becomes very critical to maintain a constantweatherseal on all sides of the windowand to insure that each lock engagesproperly with its keeper.
2. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended.
3. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended.
4. For metal window profiles, Truthrecommends stainless steel machinescrews. However, in most applications,stainless steel sheet metal screws willprovide adequate holding power.
INCLUDE TRUTH SPECS ONYOUR NEXT WINDOW PROJECT
Window check rail locks shall beincluded which will increase bothsecurity and weather seal tightness.The lock must provide easy operationand a positive locked feel.
The lock and keeper shall be constructedof high pressure zinc alloy die castings.
Window locks shall be 30590 CamGard Series as manufactured by TruthHardware.
30590 CAM GARD LOCK
12a
FIG. 1 A30590402 LOCK
[57.2 mm]
2.250
[32.2 mm]1.268
[82.6 mm]3.250
[7.1 mm]
.280
[12.2 mm].480
[19.8 mm]
.780
[16.5 mm].650
[56.9 mm]2.240
[6.6 mm].260
[3.3 mm].130
[73.0 mm]2.875
[13.5 mm].530
LEFT HAND SHOWN
C30628
C30643
A
0.56
0.617
B
0.04
0.04
C
0.5
[56.9 mm]2.240 [9.5 mm]
.375
[4.8 mm].188
[73.0 mm]2.875
[13.5 mm].530
FIG. 2 C30628.XX KEEPER FIG. 3 C30643.XX KEEPER
A30590402
A30590403
A30590402
A30590403
CAM PULL-IN .080
RIGHT HAND A30590402
LEFT HAND A30590403
AVAILABLE KEEPERSRECOMMENDED SCREWS:
(QTY 2) #6 PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TO BE DETERMINEDBY PROFILE)
RECOMMENDED SCREWS:
(QTY 2) #6 WITH A #5 HEADPHILLIPS FLAT HEAD SCREW(LENGTH AND THREAD TYPE TOBE DETERMINED BY PROFILE)
AVAILABLE LOCKS
AVAILABLE LOCKS
RECOMMENDED SCREWS:
(QTY 2) #6 PHILLIPS FLAT HEADSCREW (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE)
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
DOUBLE HUNGSLIDER 17 RESTORATION HARDWARE
13
When the window’s design or thehome’s décor calls for that traditionaltouch, Truth’s Restoration Hardware isthe answer. Designed and crafted toreplicate the styling of windowhardware from an earlier era, Truth hasused today’s technology to create ahardware system that is both stylish and functional.
APPLICATION AND DESIGN:Truth’s Restoration Lock comesequipped with the traditional open camlook, and is fitted with a durable plasticinsert on the keeper to protect thesurface of the cam during lock-up andto aid in its smooth operation. Thisopen cam design also provides for asimple visual indicator that the systemis locked.
The traditional styling of the thumblever on the lock is ergonomicallysimple to operate. The spring backdesign snaps the cam into the lock orun-locked position which reduces thepotential for accidental marring ofgrilles.
With a lower profile than many otherlock and keeper configurations, Truth’sRestoration Lock system helps tominimize sight line interference.
Utilizing standard mounting holes (2-1/16") and setback (11/16") this lockand keeper are an easy retrofit toexisting lock applications therebyreducing any additional manufacturingset-ups.
Truth also offers a Restoration Sash Lift which has a traditional finger-pulllook, and encourages the lifting of thewindow from bottom thereby puttingless stress on the sash than wouldoccur from pushing on the top rail.See Truth’s Sash Lift section forfurther technical information.
WARRANTY: Protected under theterms of the Truth Warranty for Window& Door Manufacturers & AuthorizedDistributors. Refer to Truth’s Terms & Conditions for further details.
MATERIAL: High-pressure,corrosion-resistant die-cast zinc.Molded plastic insert.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth’s Color Chart forexamples of Truth’s most popularfinish options. Truth also offers a wide range of decorative “plated”finishes – contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
ORDERING INFORMATION:1. Order item #17.02 Restoration Lock.
2. Order item #12594.XX RestorationKeeper
3. Order item #18.16 Restoration Lift
4. Specify finish
5. Select screws (fasteners). Soldseparately.
RECOMMENDED SCREWS:Phillips flat head screws. Refer todrawings for additional specs. Lengthand thread type to be determined byprofile. For further information onscrew selection – see Truth Tips
TRUTH TIPS: 1. When two locks are used on onewindow, the placement of each lock,with respect to its keeper becomes verycritical to maintain a constant weatherseal on all sides of the window and toinsure that each lock engages properlywith its keeper.
2. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended.
3. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended.
INCLUDE TRUTH SPECS ONYOUR NEXT WINDOW PROJECTWindow check rail locks shall beincluded which increase both securityand weather seal tightness. The lockmust provide easy operation andpositive locked feel (detent). Windowcheck rail locks shall be of open camdesign.
Locks will be of #17 Series design asmanufactured by Truth Hardware.
17 RESTORATION HARDWARE
13a
GLASS
GLASS
FIG 2 17.02 RESTORATION LOCK APPLICATION
RECOMMENDED SCREWS:
(QTY 2) #6 PHILLIPS FLAT HEAD SCREWS(LENGTH AND TYPE TO BE DETERMINED BYPROFILE)
RECOMMENDED SCREWS:
(QTY 2) #6 PHILLIPS FLAT HEAD SCREWS(LENGTH AND TYPE TO BE DETERMINED BYPROFILE)
FIG 3 12594 KEEPER
FIG. 1 RESTORATION LOCK APPLICATION
.030.76
LOCKEDPOSITION
2.72069.1
.68817.5
2.06252.4
.55014.0
.76119.3
.2706.9
1.15629.4
1.47237.4
.67517.1
2.72069.1
2.06252.4
.1564.0
.3298.4
.3879.8
700 WEST BRIDGE STREET, OWATONNA, MN 55060 � 507.451.5620 800.866.7884 � TRUTH.COM
FIG. 1 RESTORATION LOCK APPLICATION
FIG. 2 17.02 RESTORATION LOCK APPLICATION
FIG. 3 12594 KEEPER
19 POSITIVE ACTION LOCK(PAL SYSTEM)
14
DOUBLE HUNGSLIDER
Truth Hardware’s Positive Action Lock(PAL) Systems are some of the mostversatile and easy to operate lockingsystems in the marketplace today.Available in the original Push Buttondesign and new Slide Tab designs, theselock systems are simple to operate andprovide added security for both vinyl orwood windows. A simple movement of the locking tabor push of the button disengages thelock allowing the sash to move freely.When the window is closed the PALSystem automatically locks, securing thewindow without having to manipulatethe lock again. Certain models can be used with orwithout a keeper depending on thewindow’s design. Window profiles thatincorporate a notch in the meeting railmay not require a keeper to secure thewindow in the locked position resultingin decreased inventory costs to themanufacturer and infinite side-to-sideforgiveness in the locks’ application.
FEATURES & BENEFITS:Snap-on Cover: Available in the19.62/63 slide tab designs, this featureallows for more aesthetic coverpossibilities thus reducing material costsand allowing it to fit more applications. Easy Operation: Comfortable fingerpull (slide tab design) provides positivefeedback that the lock is fully retracted(slight “snap” felt). Text is locatedunder the pull on the lock to indicatedan un-locked condition when the lockbolt is retracted. This provides at-a-glance feedback to the homeowner thatthe lock is in the unlocked state.Multiple Mounting Options: Slide Tabdesign can be mounted with screwfasteners in both the vertical (recessed ortop mount) and horizontal (recessedonly) orientations and may be fitted intoTruth’s standard 9369 Series RecessedLock cut-out (call Truth for info).Visual Security: The Truth lock bolt onthe PAL System will stay retracted whenopening the sash and remain retracteduntil triggered in a positively lockedposition. Competitive locks tend totrigger when opening the sash, thusproviding a false locked position. Thisunique feature helps users of the PALSystem to prevent accidental marring oftheir window as the lock slides pastdecorative grilles.Multiple Keeper configurations:Including top-mount, and face mountkeepers. Custom keepers also availableto meet customer specific applicationneeds.
LOGO OPTIONS:For that “personalized touch,” TruthHardware’s Positive Action Locks arecapable of accepting your company’sname or logo with Truth’s pad printingprocess. This logo reproduction processis an attractive way of highlighting yourcompany signature.
WARRANTY:Protected under the terms of the TruthWarranty for Window & DoorManufacturers and AuthorizedDistributors. Refer to Truth’s Terms &Conditions for further details.
MATERIAL:High pressure, corrosion resistant, die-cast zinc with a high strength acetal bolt.Slide Tab version constructed of highquality molded plastic cover over die castbase.
FINISH:Electrostatically applied, durable coatingsthat provide excellent resistance tochipping, scratching and corrosion whilemaintaining color stability for years indirect sunlight. Please refer to Truth’scolor chart for examples of Truth’s mostpopular finish options. Truth also offersa wide range of decorative “plated”finishes – contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
ORDERING INFORMATION:1. Order PAL System style (specify bypart number)• #19.62.00.002 Slide Tab PAL – HookVersion w/screw hole spread 1.812 and1.312• #19.63.00.001 Slide Tab PAL – HookVersion w/screw hole spread 2.0622. Order covers for 19.62/63 Slide TabVersions separately#13663.XX Cover (19.62 model)#13885.XX Cover (19.63 model)
3. Specify finish number.4. Select screws (fasteners). Soldseparately.
RECOMMENDED SCREWS:2 - #7 Phillips Flat Head Screws. Referto drawings for additional specs. Lengthand thread type to be determined byprofile. For further information on screwselection – see Truth Tips.
TRUTH TIPS:1. For accurate hardware placement invinyl applications, pre-drilling of thewindow profile is stronglyrecommended.2. To help locate mounting position,Truth recommends a “locating groove”in the profile. The “dimpled” version ofthe PAL System used on profiles with agroove will also help keep lock inposition during application process.3. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended.4. For top mounted keeperconfigurations a 0.3” minimum deepsurface is needed on the fixed rail withboth surfaces flush when closed.
INCLUDE TRUTH SPECS ONYOUR NEXT WINDOW PROJECTWindow check rail locks shall beincluded which will increase bothsecurity and weather seal tightness. Thelock must provide easy operation andpositively locks upon closure.Window lock will be of quick snapaction swing bolt design providingmaximum forgiveness for sashalignment. The product will beconstructed of high pressure zinc alloydie cast with high strength acetal bolt.Window lock shall have automaticlatching to allow user to use both handsto move the sash. Window will beunlocked by pressing a push lever, orsliding tab.Window locks will be 19 series PositiveAction Locks as manufactured by TruthHardware, Owatonna, Minnesota.
19.62 Series19.60 Series
19.63 Series
19 POSITIVE ACTION LOCK(PAL SYSTEM)
14a
[11.5 mm].451
[4.8 mm].190 MIN
[8.9 mm].350 MIN
[5.6 mm].220 MAX
LOCKED
FIG. 1 APPLICATION OF 19.64 POSITIVE ACTION LOCK (PAL) SYSTEM
[72.9 mm]2.870
[17.3 mm].681
[14.7 mm].581
[57.2 mm]2.250
[13.3 mm].524
[41.3 mm]1.625
[31.5 mm]1.240
UNLOCKED
HARDWARE SHOWNP.A.L.
1
1
19.64
RECOMMENDED SCREWS:
LOCKED POSITION SHOWN
WOOD: *7 PHILLIPS FLAT HEAD SHEET METAL SCREWS (LENGTH TO BE DETERMINED BY PROFILE) PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS,(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE) DIMENSION MUST BE MAINTAINED FOR PROPER LOCK OPERATION **FOR ACCURATE HARDWARE PLACEMENT PRE-DRILLING IS STRONGLY RECOMMENDED
19 POSITIVE ACTION LOCK(PAL SYSTEM)
14b
FOR ADDITIONAL KEEPEROPTIONS CONTACT TRUTH
[17.5 mm].688
[11.6 mm].457
[58.5 mm]2.302
FIG. 2 APPLICATION OF 19.62 POSITIVE ACTION LOCK (PAL) SYSTEM
LOCKED
[34.9 mm]1.375
[58.5 mm]2.302
[15.5 mm].611
[21.9 mm].861
[33.3 mm]( 1.312 )
[46.0 mm]( 1.812 )
LOCKED POSITION SHOWN
19.62 P.A.L.
45579.XX KEEPER
13663.XX COVER
HARDWARE SHOWN
WOOD: #7 PHILLIPS FLAT HEAD SHEET METAL SCREWS (LENGTH TO BE DETERMINED BY PROFILE) PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
19 POSITIVE ACTION LOCK(PAL SYSTEM)
14c
LOCKED LOCKED POSITIONSHOWN
[23.7 mm].935
[52.4 mm]2.062
[71.4 mm]2.813
[11.3 mm].444
FIG. 3 APPLICATION OF 19.63 POSITIVE ACTION LOCK (PAL) SYSTEM
[52.4 mm]2.062
[23.9 mm].940
[17.5 mm].690
[18.7 mm].738
[33.1 mm]1.304
[71.4 mm]2.813
RECOMMENDED SCREWS: WOOD: #6 PHILLIPS FLAT HEAD SHEET METAL SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE PVC/METAL: #6 PHILLIPS FLAT HEAD SCREWS, (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
FOR ADDITIONAL KEEPEROPTIONS CONTACT TRUTH
19.63 P.A.L.
45639.XX KEEPER
13885.XX COVER
HARDWARE SHOWN
19 POSITIVE ACTION LOCK(PAL SYSTEM)
14d
19.63 PAL
FIG. 4 45579.XX KEEPER
[7.2 mm]
.282
[52.39 mm]
2.062
[3.6 mm]
.141
[10.3 mm].405
[63.5 mm]
2.500
19.62 PAL
AVAILABLE LOCK
WOOD: #7 PHILLIPS FLAT HEAD SHEET METAL SCREWS (LENGTH TO BE DETERMINED BY PROFILE) PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS (LENTGH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
[25.4 mm]
1.000
19.62 PAL
AVAILABLE LOCK
19.63 PAL
FIG. 5 45639.XX KEEPER
[5.8 mm]
.230
[25.9 mm]
1.020
[43.2 mm]
1.700
[7.3 mm]
.288
[3.2 mm]
.125
[8.6 mm]
.340
[2.4 mm]
.095
WOOD: #7 PHILLIPS FLAT HEAD SHEET METAL SCREWS (LENGTH TO BE DETERMINED BY PROFILE) PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
19 POSITIVE ACTION LOCK(PAL SYSTEM)
14e
19 POSITIVE ACTION LOCK(PAL SYSTEM)
14f
**
FIG. 6 APPLICATION OF 19.60 POSITIVE ACTION LOCK (PAL) SYSTEM
UNLOCKED
LOCKED
HARDWARE SHOWN19.60 P.A.L.
41235.XX KEEPER
LOGO AREA
LOGO AREA
MAX.MIN.
WOOD: (P/N 19160.XX) #7 X 1 1/2 PHILLIPS FLAT HEAD SHEET METAL SCREWS. PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS, (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
DIMENSIONS MUST BE MAINTAINED FOR PROPER LOCK OPERATION** FOR ACCURATE HARDWARE PLACEMENT PRE-DRILLING IS STRONGLY RECOMMENDED
LOCKED POSITION SHOWN
FOR ADDITIONAL KEEPEROPTIONS CONTACT TRUTH
1
1
1
[52.4 mm]2.062
[8.6 mm].338
2.277 mm.753 mm
.090
.030
22.769 mm21.245 mm
.896
.836
[29.1 mm]1.145
[39.8 mm]1.568
[16.9 mm].665
[74.9 mm]2.950
PAL SYSTEM USEDWITH KEEPER
PAL SYSTEM USEDWITH OUT KEEPER
2.785 mm1.134 mm
.110
.045
[15.4 mm].605
[9.9 mm].390
[11.7 mm].459 MIN
RECOMMENDED SCREWS:
19 POSITIVE ACTION LOCK(PAL SYSTEM)
14g
[52.4 mm]2.062
[8.6 mm].338
[74.9 mm]2.950
[16.9 mm].665
HARDWARE SHOWN41235.XX KEEPER
19.60 PAL
[4.3 mm].168
FIG. 7 41235 KEEPER
FIG. 8 32780 KEEPER
[55.6 mm]2.187
[9.7 mm].381
[3.2 mm].125
[74.9 mm]2.950
[16.9 mm].665
[6.4 mm].250
FIG. 9 41320 KEEPER[52.4 mm]
2.062
[11.3 mm].444
[4.3 mm].168
[8.6 mm].338
[16.9 mm].665
[74.9 mm]2.950
WOOD: (QTY 2) (P/N 19160.XX) #7 X 1 1/2 PHILLIPS FLAT HEAD SHEET METAL SCREWS PVC/METAL: #7 PHILLIPS FLAT HEAD SCREWS, (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
AVAILABLE LOCK
(QTY 2) #6 SHEET METAL SCREWSPHIILIPS FLAT HEAD SCREWS.(LENGTH AND THREAD TYPE TOBE DETERMINED BY PROFILE)
(QTY 2) #6 SHEET METAL SCREWSPHIILIPS FLAT HEAD SCREWS.(LENGTH AND THREAD TYPE TOBE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
RECOMMENDED SCREWS:
RECOMMENDED SCREWS:
700 WEST BRIDGE STREET, OWATONNA, MN 55060 � 507.451.5620 800.866.7884 � TRUTH.COM
19 FuSION™ SYSTEM
15
Appropriately named the Fusion™System, Truth Hardware has successfullymerged two separate pieces of windowhardware into one completelyrevolutionary system. Truth hasdesigned a system where the tilt latchesare hidden beneath the check rail and areactuated by the same lever as the lock.With just one hand, the homeownercan unlock the window and release thetilt latches. The Fusion system isloaded with features at a very affordableprice.
TRuTH’S FuSION IS ALL AbOuTvERSATILITYThe Fusion System is designed to giveyou choices. First, both tilt latches areactuated by a single lock/tilt latchmechanism. This mechanism can belocated anywhere on the check rail, so ifyou prefer to use more than one lock onthe rail, you have the option of adding amatching sash lock. With the Fusion system you won’t haveto stock complete locks in all yourdifferent color offerings. There is astandard base assembly that screws intoyour check rail. Using Truth’s patentedtechnology, the stylish housing andlever assembly securely attaches to thebase allowing you to efficiently manageyour inventory. This “fastenerless” coverdesign gives the window a cleanerappearance than other checkrail optionsand also allows for easy removal of thehardware to make it more convenient topaint or stain the window following itsinstallation. Perhaps the most impressive feature ofthis system is that it can be used onany-sized window because you cut theconnecting strap to its appropriatelength after the hardware is installed inthe window. What could be easier?
FEATuRES & bENEFITS:• Available with trigger actuated latches- prevents marring wood when windowsare tilted back in. Latches withouttriggers used primarily in vinyl windowapplications, are also available.• Lock and tilt latch release are actuatedby one mechanism - allows you theoption of using either single or multiplelocks on the window.• Pick-resistant base plate increasessecurity.
• Latches are hidden into the checkrail -Lets your customer see more of thebeauty of your window, rather than thehardware.• Totally adjustable to any size window -You cut the connecting strap to thedesired length after hardware is installedin the window.• Non-handed latches - Less inventorycosts and less hassle on the productionline.• Housing assembly is separate frombase - Increases inventory efficiencies byonly having to inventory the housing indifferent colors or finishes - not theentire locking system.• Stylish fastenerless housing - Makes iteasy to remove for staining or finishing. • Easy, intuitive one-handed operation.• Corrosion Resistant - Compositeconstruction provides a corrosionresistant system.
LOGO OPTIONS:You can personalize the Fusion Lockwith your logo. Truth’s pad printing
process is a great way to highlight yourcompany’s identity.
WARRANTY:Protected under the terms of the TruthWarranty for Window & DoorManufacturers and AuthorizedDistributors. Refer to Truth’s Terms & Conditions for further details.
MATERIAL:Housing assembly is powder coateddiecast zinc. The lock base and latchassemblies are of a compositeconstruction consisting of engineeredplastics, zinc and stainless steel. Thelatch assembly and lock assembly are tiedtogether by a corrosion resistant strap.
FINISH:Electrostatically applied, durable coatingsthat provide excellent resistance tochipping, scratching and corrosion whilemaintaining color stability for years indirect sunlight. Please refer to Truth’scolor chart for examples of Truth’s most
DOUBLE HUNGSLIDER
Tilt Latches (Vinyl Application) Tilt Latches (Wood Application)
Fusion System (locked)
popular finish options. Truth also offersa wide range of decorative “plated”finishes - contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
ORDERING INFORMATION:Order the Fusion System by individualcomponents:#19.70.XX.100 - Housing/LeverAssembly#19.71.00.100 - Lock Base• Wood Window Application• #12617 - Latch with trigger• #12743 - Latch without trigger
• Vinyl Window Application• #12744 - Bolt location "A"• #12745 - Bolt location "C"
Note: Latches with variable triggerlengths available. Contact Truth foradditional information.Latches (2 required)#22196 - Strap (24,000 foot roll)#41333.XX - Keeper, or #42059.XX - Keeper
OPTIONAL:#19.73.XX.100 - SecondaryHousing/Lever Assembly#19.72.00.100 - Secondary Lock BaseRequired Tools for connecting the strap(Not included):Two 1/16" Allen Wrenches
RECOMMENDED SCREWS:Base: 2 - #8 Pan head screwsKeeper: 2 - #8 Flat head screwsLatches: 2 -#6 Flat head Types of screws required determined by material of profile used. Refer todrawings for complete information onscrew type and quantity needed (soldseparately). For additional informationon screw selection - see Truth Tips.
TRuTH TIPS:1. When two locks are used on onewindow, the placement of each lock,with respect to its keeper, becomes verycritical to maintain a constant weatherseal on all sides of the window and toinsure that each lock engages properlywith its keeper.2. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall
INCLuDE TRuTH SPECS ONYOuR NEXT WINDOW PROJECTRecess mounted check rail lock whoselever activates the enclosed tilt latchesshall be included which will increasesecurity and weather seal tightness. The lock must provide easy operationand provide a pick resistant base platewhich protects the cam thus providingincreased security.
Window check rail locks will be ofinternal cam design to provide optimumpull-in to aid in sealing the meetingrails.
Window locks and tilt latches will be 19 Series Fusion System asmanufactured by Truth Hardware.
15a
FuSION™ SYSTEM19
19 FuSION™ SYSTEM
15b
[8.1 mm].320
[7.9 mm].312
[
[9.8 mm].385
[14.5 mm].571
[43.2 mm]1.699
F
[77.3 mm]3.044
[38.7 mm]1.522
[33.9 mm]1.334
[
DETERM
[7.9 mm].312
[
71.00.100 BASE FOR WOOD AND VINYL APPLICATIONS
F
[72.5 mm]2.854
[31.5 mm]1.241
[11.7 mm].461
[13.5 mm].530
[12.4 mm]2X .490
[53.5 mm]2.108
[15.2 mm]2X R.600
RECOMMENDED SCREWS:
(QTY 2)#8 PAN HEAD SCREWS (LENGTH AND THREAD TYPE DETERMINED BY PROFILE)
FIG. 1 FUSION SNAP LOCK FOR WOOD AND VINYL APPLICATIONS
FIG. 2 19.71.00.100 BASE FOR WOOD AND VINYL APPLICATIONS
19 FuSION™ SYSTEM
15c
INTERIOR VIEW
EXTERIOR VIEW
COVER ASSEMBLY19.70.XX.100
BASE ASSEMBLY19.71.00.100
STRAP GUIDE(INCLUDED WITH BASE 19.71.00.100)
LATCH12617
LATCH12617
STRAP22196
FIG. 3 FUSION LOCK ASSEMBLY FOR WOOD APPLICATION
19 FuSION™ SYSTEM
15d
FIG. 4 FUSION KEEPER ASSEMBLY FOR WOOD APPLICATION
KEEPER41333.XX
19 FuSION™ SYSTEM
15e
[15.9 mm]R.625
[8.3 mm].325
[6.4 mm]2X R.250
[72.8 mm]2.867
[29.3 mm]1.152
[19.0 mm].750
[31.8 mm]1.250
[10.8 mm].425
[23.7 mm].935 [79.4 mm]
2X 3.125
[4.8 mm]2X .188
[29.2 mm]1.148
[17.2 mm].679
[14.6 mm].574
[24.0 mm].944
[12.0 mm].472 [2.3 mm]
.092[15.9 mm]
Ø.625
[7.9 mm]4X R.312
[1.1 mm].045
[14.0 mm].550
CUSTOMER DEPENDANT
[72.6 mm]2.857
[8.5 mm].334
[4.7 mm].184
F
A
SECTION A-A
A
FULL R
CUSTOMER DEPENDANT
BOTH SIDES
FIG. 5 FUSION LOCK APPLICATION FOR WOOD APPLICATIONS
19 FuSION™ SYSTEM
15f
FIG. 6 FUSION LATCH 12617 (FOR WOOD APPLICATIONS)
[24.2 mm].952
40°
CONTACT TRUTH FOR OTHER OPTIONS
[11.8 mm].466
[14.3 mm].562
[7.1 mm].280
[14.2 mm].560
[19.0 mm].750
[2.0 mm].077
[3.9 mm].154
[9.5 mm].375
[7.9 mm]4X R.312
[15.5 mm]Ø.610
[7.8 mm].306
[8.1 mm].320
[8.3 mm].326
[50.8 mm]2.000
[25.4 mm]1.000
[59.6 mm]2.345
[4.8 mm].188
[9.7 mm].382
[74.0 mm]2.915
[28.8 mm]1.135
[23.6 mm].930
[77.3 mm]3.044
[7.8 mm].308
[10.7 mm].420
[72.2 mm]2.844
[2.3 mm].092
[12.7 mm].500
FIG. 7 KEEPER 41333 (FOR WOOD APPLICATIONS)
FOR OTHER LENGTHSCONTACT TRUTH
RECOMMENDED SCREWS:
(QTY 2)#4,#5,or #6 PHILLIPS FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
(QTY 2)#8 PHILLIPS FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
FIG. 7 KEEPER 41333 (FOR WOOD APPLICATIONS)
19 FuSION™ SYSTEM
15g
INTERIOR VIEW
EXTERIOR VIEW
F G. 8 FUSION LOCK ASSEMBLY (FOR VINYL APPLICATIONS)
P
COVER ASSEMBLY19.70.XX.100
BASE ASSEMBLY19.71.00.100
STRAP GUIDE(INCLUDED WITH BASE 19.71.00.100)
LATCH12744
LATCH12744
STRAP22196
FIG. 8 FUSION LOCK ASSEMBLY (FOR VINYL APPLICATIONS)
19 FuSION™ SYSTEM
15h
FIG. 9 FUSION KEEPER ASSEMBLY (FOR VINYL APPLICATIONS)
19 FuSION™ SYSTEM
15i
KEEPER LAYOUT
CUSTOMERDEPENDENT
FULL R
[8.7 mm].342
[72.6 mm]2.857
[29.3 mm]1.152
[19.0 mm].750
[31.8 mm]1.250
[69.8 mm]2.750
[8.5 mm].334
F
FULL R
[70.2 mm]2.765
[11.5 mm].453
[50.8 mm]2.000
[15.9 mm]R.625
FIG. 10 FUSION KEEPER APPLICATION (FOR VINYL WINDOW APPLICATIONS)
19 FuSION™ SYSTEM
15j
FIG. 11 FUSION APPLICATION FOR VINYL WINDOWS WITH INSERTS
[12.7 mm].500
REINFORCING INSERT POSITIONING
23.5 mm.925
(1.210 MIN)
REINFORCING INSERT
.875 MIN/2.000 MAX
[15.9 mm]Ø.625
TOP LOCK RAIL WITH INSERT
10.8 mm.425
[1.6 mm].063
CUSTOMER DEPENDENT
[19.9 mm].782
[35.3 mm](1.391 MIN)
[2.0 cm].782
[14.6 mm].574
[7.3 mm].287
[16.1 mm]Ø.634
[10.8 mm].425
CUSTOMER DEPENDENT
(1.070 PLUS VINYLWALL THICKNESS PLUSINSERT WALL THICKNESS)
(1.250 PLUS VINYL WALL THICKNESSPLUS INSERT WALL THICKNESS)
TANGENT TO INSERTINTERNAL WALLS 2X
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
19 FuSION™ SYSTEM
15k
19 HARMONY™ SYSTEM
15.1
HARMONY SYSTEMBuilding on the popularity we receivedon our award-winning Fusion™System, Truth Hardware has nowembarked on the next generationcombination lock and tilt latch systemnamed, the Harmony™ System. Aptlynamed, as this system beautifullyintegrates the check rail lock and tiltlatch together in a manner which createsa new level of installation ease.
INTEGRATED TECHNOLOGYThe Harmony System has been designedto allow the homeowner to activate thelock and tilt latches with the samedevice. By simply manipulating thelever on one lock, an individual canboth lock or unlock their window, andactivate the tilt latches to pivot the sashto allow for ease of cleaning.Manufacturers will appreciate the ease ofinstallation - you just snap in the tiltlatch, screw down the lock and you aregood to go. The Harmony system evenself-locates for you!
TILT LATCHES OFFERED INTWO VERSIONS – The StandardHarmony Latch and the newHarmony 7 Latch.
The Standard Harmony latch versionshould be considered when there is anexisting reinforcement surface formounting or if the internalreinforcement can be modified. If this isnot the case, then the Harmony 7 Latchversion is the better choice.
FEATURES & BENEFITS• Lock and tilt latch release are actuatedby one mechanism
• Quick and easy assembly• Self locating features in lock and latch!• Latches are hidden within thecheckrail, thus producing cleaner sitelines on the window.
• Simple routing for lock and latch• Detents and icons indicatelock/unlock/tilt positions
• Harmony 7 latches are color coded forquick identification of correct hand
• Matching, non-actuating lockassembly available for applicationswhere you don’t want an integratedlock/latch!
LOGO OPTIONSYou can personalize the HarmonySystem with your logo. Truth’s padprinting process is a great way tohighlight your company’s identity andreinforce your brand in the marketplace.
WARRANTYProtected under the terms of the TruthWarranty for Window & DoorManufacturers and AuthorizedDistributors. Refer to Truth’s Terms &Conditions for further details.
MATERIALHousing assembly is powder coateddiecast zinc. Latch assemblies are of acomposite construction consisting ofengineered plastics and stainless steel, orSST wire.
FINISHElectrostatically applied, durablecoatings that provide excellent resistanceto chipping, scratching and corrosionresistance while maintaining colorstability for years in direct sunlight.
Please refer to Truth’s color chart forexamples of Truth’s most popular finishoptions. Truth also offers a wide rangeof decorative “plated” finishes – contactTruth for additional information onavailability of these finishes on specificproduct lines.
ORDERING INFORMATION Order the Harmony System byindividual components:LOCKS: (same lock used for eitherHarmony or Harmony 7 applications)# 19.77.XX.010 – Housing/LeverLH Lock assembly# 19.77.XX.020 – Housing/LeverRH Lock assembly# 19.78.XX.010 – Housing/LeverAssembly – Passive (for use onapplications without integrated latch)
DOUBLE HUNGSLIDER
Harmony System (unlocked) Harmony System (tilt latch retracted)
Harmony System (locked)
KEEPERS: (same keeper used foreither Harmony of Harmony 7applications – see drawings for availablekeeper designs)# 45678.XX Keeper# 42052.XX Keeper# 45674.XX Keeper# 33676.XX Keeper# 45686.XX Keeper (special toTrustgard window design)
LATCHES (Standard Harmony Latches) # 14222 – Standard Harmony Latchassembly (LH)# 14223 – Standard Harmony Latchassembly (RH)# 14306 – Standard Harmony Latchassembly with offset (LH)# 14307 – Standard Harmony Latchassembly with offset (RH)
The fol lowing Ti l t Latchesrequire# 45683 – Cage (purchasedseparately):
(Harmony 7 latches)# 14321 – 5” Tilt Latch (LH)# 14322 – 5” Tilt Latch (RH)# 14323 – 7” Tilt Latch (LH)# 14324 – 7” Tilt Latch (RH)# 14325 – 9” Tilt Latch (LH)# 14326 – 9” Tilt Latch (RH)
RECOMMENDED SCREWS (soldseparately)4 - # 6 Phillips Flat Head Screws(Length and thread type to be determinedby profile). For additional informationon screw selection – see Truth Tips.
TRUTH TIPS1. When two locks are used on onewindow, the placement of each lock,with respect to its keeper, becomes verycritical to maintain a consistent weatherseal on all sides of the window and toinsure that each lock engages properlywith its keeper.2. For vinyl window applications,mounting screws should pass throughtwo PVC walls or one PVC Wall andone insert wall.
15.1a
HARMONY™ SYSTEM19
RECOMMENED SCREWS:
(QYT 2) #6 PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TOBE DETERMINED BY PROFILE)
RECOMMENED SCREWS:
(QYT 2) #6 PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TOBE DETERMINED BY PROFILE)
1.31333.3
3.00076.2
1.50038.1
2.00050.8
2X .5614.29
.50012.7
1.50038.1
.3408.6
1.18830.2
1.71943.67
3.00076.2
1.50038.1
1.31333.3
2.00050.8
2X .5614.29
.50012.7
1.50038.1
.3408.6
1.18830.2
19 HARMONY™ SYSTEM
15.1b
FIG. 1 19.77.XX.020 RH LOCK SHOWN (19.77.XX.010 LH LOCK)
FIG. 2 19.78.XX.010 LH LOCK PASSIVE SHOWN
19 HARMONY™ SYSTEM
15.1c
FIG. 3 LH LATCH 14222 SHOWN (RH LATCH IS 14223)
.3759.5
.48612.3
2.5063.5
7.75196.9
.42010.7
.66616.9
.
.3508.9
.3839.7
FIG. 4 LH LATCH 14306 SHOWN (RH LATCH IS 14307)
.3508.9.383
9.73
.48612.3.302
7.7
.3759.5
7.75196.9
.66616.9
19 HARMONY™ SYSTEM
15.1d
FIG. 5 19.77.XX.010 AND 19.77.XX.020 LOCK ASSEMBLY TO STANDARD HARMONY LATCHES
19 HARMONY™ SYSTEM
15.1e
(127.0mm)
7 (177.8mm)
.56314.3
(FROM LOCKFRONT EDGE)
"A"
1.20030.48
(FROM LOCK FRONTEDGE)
2.00050.8
R.50012.7
1.52038.6MIN
1.54039.1
MAX
A A
.3458.8
MIN
SECTION A-A
1
FIG. 6 19.77.XX.010 LOCK APPLICATION
"A"
5.000" (127.0mm)
7.000" (177.8mm)
.
1.20130.5
(FROM LOCK FRONT EDGE)
.40310.24
.1373.48
.50612.85
.73818.74
(FROM LOCK FRONT EDGE)
19 HARMONY™ SYSTEM
15.1f
FIG. 7 19.77.XX.020 RH LOCK SHOWN (19.77.010 LH LOCK)
RECOMMENED SCREWS:
(QYT 2) #6 PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TOBE DETERMINED BY PROFILE)
R
1.31333.3
3.00076.2
1.50038.1
2.00050.8
2X .5614.29
.50012.7
1.50038.1
.3408.6
1.18830.2
RECOMMENED SCREWS:
(QYT 2) #6 PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TOBE DETERMINED BY PROFILE)
1
1.71943.7
3.00076.2
1.50038.1
1.31333.3
2.00050.8
2X .5614.29
.50012.7
1.50038.1
.3408.6
1.18830.2
FIG. 8 19.78.XX.010 LH LOCK PASSIVE SHOWN
19 HARMONY™ SYSTEM
15.1g
Ø .49012.4
.3208.1
.3198.1
.1904.8
.3759.5
6.75171.4
.1904.8
.3759.5
8.75222.2
Ø .49012.4
.3208.1
.3198.1
.1904.8
.3759.5
10.75273.0
Ø .49012.4 .320
8.1.3198.1
FIG. 9 5” LATCH 14321 SHOWN (5” RH LATCH IS 14322)
FIG. 10 7” 14323 LH SHOWN (7” RH LATCH 14324)
FIG. 11 9” LH 14325 SHOWN (9” RH LATCH 14326)
19 HARMONY™ SYSTEM
15.1h
FIG. 12 45683 CAGE
.44511.3
1.6140.9
.39510.0
1.24331.6
R.50512.8
19 HARMONY™ SYSTEM
15.1i
FIG. 13 19.77.XX.010 AND 19.77.XX.020 LOCK ASSEMBLY TO HARMONY 7 LOCK LATCHES
19 HARMONY™ SYSTEM
15.1j
FIG. 14 19.77 HARMONY 7 LOCK APPLICATION
"A"5.000" (127.0)7.000" (177.8)9.000" (228.6)
"A"
1.24831.69
(FROM LOCKFRONT EDGE)
2.00050.8
.56314.3
(FROM LOCKFRONT EDGE)
1.62041.1
MIN
1.64041.7
MAX
R.50012.7
A A
.78920.0
MIN SET BACK
(FROM LOCK FRONT EDGE)
1.41435.9
MAX SET BACK
(FROM LOCK FRONT EDGE)
.40010.2MIN
SECTION A-ASCALE 1 : 1
.3288.3
1.25431.8
MAX
(FROM LOCK FRONT EDGE)
.62916.0
MIN
(FROM LOCK FRONT EDGE)
Ø .50012.70
X 2.500 MIN
19 HARMONY™ SYSTEM
15.1k
RECOMMENDED SCREWS:
(QTY 2) #6 PHILLIPS FLAT HEADSCREWS (LENGTH AND THREADTYPE TO BE DETERMINED BY PROFILE)
R
1.0025.40
.174.31
1.75044.5
Ø .1503.8
1.3835.10
.246.19
FIG. 15 42052.XX KEEPER
FIG. 16 45674.XX KEEPER
RECOMMENDED SCREWS:
(QTY 2)#6 PHILLIPS FLAT HEADSCREWS (LENGTH AND THREADTYPE TO BE DETERMINED BY PROFILE)
1
1.0025.40
.205.17
1.75044.5
Ø .1503.8
1.4235.97
.389.68
19 HARMONY™ SYSTEM
15.1l
FIG. 17 45678.XX KEEPER
RECOMMENDED SCREWS:
(QTY 2) #6 PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TOBE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
(QTY 2) #6 PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TOBE DETERMINED BY PROFILE)
.5914.99
.328.13
.2496.33
.3408.64
.4711.9
1.4135.72
1.7544.5
.184.50
3.0076.20
.55914.2
.2506.35
2.00050.8
.143.48
3.00076.2
Ø .2757.0
FIG. 18 33676.XX KEEPER
700 WEST BRIDGE STREET, OWATONNA, MN 55060 � 507.451.5620 800.866.7884 � TRUTH.COM
19 HARMONY™ SYSTEM
15.1m
DOUBLE HUNG
SLIDERTILT LATcHES
16
Truth Hardware Tilt Latches aredesigned to provide windowmanufacturers the highest qualityproduct at a minimum cost. With severalvariations to choose from, these TiltLatches are engineered with labor savingand design features to fit virtually everyexisting window profile in today’smarketplace.
MOUNTING OPTIONS
Options include Truth’s revolutionary“snap-in” mount and the “hiddenmounting fastener”, as well asourstandard “top mounted” fasteners–each of which affords dependableoperation with secure methods forinstallation. (See following drawings foravailable options).
WARRANTY:
Protected under the terms of the “Truth Warranty for Window & Door Manufacturers & AuthorizedDistributors”. Refer to Truth’s Terms & Conditions for furtherdetails
MATERIAL:
Composite assemblies of powder coated cast zinc and/or thermoplastics.
FINISH:
Electrostatically applied, durablecoatings that provide excellent resistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth’s Color Chart for examples of Truth’s most popularfinish options. Truth also offers a wide range of decorative “plated”finishes – contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
ORDERING INFORMATION &
OPTIONS:
1.Choose Tilt Latch style (specify bypart number).
2.Specify left or right hand (ifnecessary).
3.Order screws required (if necessary).
4.Specify desired finish.
FIG. 1 46.20.XX.001 TILT LATCH
TOP ROUTING DETAIL
END
46.20.XX.001 LEFT HAND46.20.XX.002 RIGHT HAND
[17.4 mm].687
[65.1 mm]2.563
[14.7 mm].578
[9.5 mm].375
FULL R
[8.7 mm].343
[66.7 mm]2.625
[9.5 mm].375
[7.1 mm]
.281
[10.8 mm].425
[18.1 mm].714
[1.3 mm].050
[1.5 mm].060
[8.0 mm].315
[2.1 mm].082
[64.8 mm]2.550
[1.4 mm].055
[7.2 mm].285
LEFT HAND SHOWN
9750 TILT LATcHES
16a
9750 TILT LATcHES
16b
FIG. 2 46.21.XX.001 TILT LATCH
LEFT HAND SHOWN
[17.4 mm]
.687
[8.7 mm].343
[7.1 mm].281
[66.7 mm]2.625
[9.5 mm].375
[2.1 mm].082
[64.8 mm]2.550
[1.4 mm].055
[7.2 mm].285
[10.8 mm].425
[8.0 mm].315
[18.1 mm].714
[1.5 mm].060
[1.3 mm].050
ROUTING DETAIL
END
[65.1 mm]2.563
[14.7 mm].578
[9.5 mm].375
TOP
FULL R
46.21.XX.001 LEFT HAND
46.21.XX.002 RIGHT HAND
9750 TILT LATcHES
16c
[52.5 mm]2.065
LOCKINGTAB
FIG. 3 46.11 TILT LATCH
FIG. 4 46.12 TILT LATCH
SECTION A-A
[2.6 mm].103
[6.8 mm].268
[72.2 mm]2.843
[20.6 mm].810
[11.7 mm].460
[17.4 mm].685
[22.0 mm].865
[1.5 mm].060
[4.3 mm].168
LEFT HAND SHOWN
[45.3 mm]1.785
[74.5 mm]2.932
[21.4 mm].843
[9.6 mm].380
[6.8 mm].268
[74.5 mm]2.932
[9.8 mm].385
[7.1 mm].281
[13.0 mm].513[4.1 mm]
.160
[72.2 mm]2.843
[6.8 mm].268
[2.6 mm].103
[20.6 mm].810
[22.0 mm].865
[17.4 mm].685
[1.5 mm].060
[4.3 mm].168
[11.7 mm].460
[45.3 mm]1.785
RECOMMENDED SCREW:
WOOD/PVC: (QTY 2)#8 PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE.)
RECOMMENDED SCREW:
WOOD/PVC: (QTY 2)#8 PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE.)
46.11.XX.101 LEFT HAND46.11.XX.102 RIGHT HAND
NON HANDED
TILT LATcHES
16d
FIG. 5 1038L TILT LATCH (SNAP IN)
FIG. 6 4200 & 4210 TILT LATCH
A A
SECTION A-A
CL
LC
LEFT HAND SHOWN
LEFT HAND SHOWN
[7.0 mm].276
[62.2 mm]2.450
[9.0 mm].355
[18.6 mm].733
[3.4 mm].135
[1.5 mm].060
[11.2 mm].440
[2.7 mm].108
[61.5 mm]2.420
[2.0 mm].080
[6.0 mm].235
[17.3 mm].683
[14.4 mm].566
[59.7 mm]2.350
[27.3 mm]1.074
42°
SNAP IN TAB
[66.3 mm]2.610
[21.9 mm].862 [6.7 mm]
.262
[7.5 mm].295
[53.8 mm]2.120
[5.3 mm].210 [3.1 mm]
.122
[6.0 mm].235
[8.3 mm].325
[14.1 mm].555
[17.1 mm].672
[3.0 mm].120
RECOMMENDED SCREW: WOOD/PVC: (QTY 1)#8 PHILLIPS FLAT HEAD SCREWS(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE.)
1038L.XX LEFT HAND1038R.XX RIGHT HAND
4200L.XX LEFT HAND4210R.XX RIGHT HAND
LEFT HAND SHOWN
TILT LATcHES
16e
FIG. 7 4260 TILT LATCH
[2.4 mm].096
[5.9 mm].234
[14.2 mm].560
[24.3 mm].958
[7.3 mm].288
[8.0 mm].314
[2.2 mm].086
[12.6 mm].495
[75.1 mm]2.955
[1.3 mm].050
[3.4 mm].132
[78.3 mm]3.082
[4.1 mm].162
FIG. 8 4250 TILT LATCH
C
[66.0 mm]2.597
[17.0 mm].670
[14.0 mm].550[1.9 mm]
.075
[8.0 mm].315
[17.0 mm].670
[64.7 mm]2.547
[1.3 mm].050
[2.7 mm].108
[6.0 mm].237
[1.8 mm].070
24°
[8.4 mm].329
[9.0 mm].354
[3.4 mm].135
[31.7 mm]1.25
[39.5 mm]1.554
RECOMMENDED SCREWS:
(1 QTY) #8 SCREW WITH A #7 HEAD(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
NON-HANDED
(1 QTY) #8 SCREW WITH A #7 HEAD(LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
4260.XX RIGHT HAND4270.XX LEFT HAND
RIGHT HAND SHOWN
TILT LATcHES
16f
FIG. 9 46.13 TILT LATCH
[72.9 mm]2.870
[9.5 mm].375
[11.2 mm].440
[5.7 mm].223
[2.2 mm].085
[2.0 mm].080
[19.0 mm].750
[13.8 mm].543
[10.9 mm].430
[12.9 mm].507
[14.0 mm].550
[63.5 mm]2.500
[2.0 mm].080
[8.0 mm].315
[2.0 mm].077
[37.7 mm]1.483
RECOMMENDED SCREWS: WOOD/PVC (QTY 1) #6 PHILLIPS FLAT HEAD SCREWS (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
LEFT HAND SHOWN46.13.32.101 LEFT HAND46.13.32.102 RIGHT HAND
700 west bridge street, owatonna, mn 55060 n 507.451.5620 800.866.7884 n TRUTH.COM16g
DOUBLE HUNGSLIDER SASH LIFTS
17
Truth Sash Lifts help provide easyopening and closing of all double-hungor sliding windows. Truth’s new#18.16 Series Restoration Sash Liftwith its traditional finger-pull look, isdesigned to complement Truth’s #17.02Series Restoration Lock. Truth’s SashLifts encourage the lifting of thewindow from the bottom, therebyputting less stress on the sash thanwould occur from pushing on the toprail. Durable baked enamel finishes areavailable to match Truth Check RailLocks.
WARRANTY: Protected under theterms of the “Truth Warranty forWindow & Door Manufacturers &Authorized Distributors”. Refer toTruth’s Terms & Conditions for furtherdetails.
MATERIAL: High-pressure, corrosionresistant, die-cast zinc.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth’s Color Chart forexamples of Truth’s most popularfinish options. Truth also offers awide range of decorative “plated”finishes – contact Truth for additionalinformation on availability of thesefinishes on specific product lines.
ORDERING INFORMATION &OPTIONS:1. Choose Sash Lift style (specify bypart number).2. Specify finish number.
RECOMMENDED SCREWS:
Types of screws required determined bymaterial of profile used (soldseparately). For additional informationregarding screw selection - see TruthTips.
TRUTH TIPS: 1. For accurate hardware placement invinyl or metal applications, pre-drillingof the window profile is recommended. 2. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, itmay be necessary to use a longer screwthan is recommended.3. For metal window profiles, Truthrecommends stainless steel machinescrews. However, in mostapplications, stainless steel sheet metalscrews will provide adequate holdingpower.
INCLUDE TRUTH SPECS ONYOUR NEXT WINDOW PROJECTWindow sash handles shall be includedwhich will provide a positive grip onthe sash for easy window operation,while having a low profile appearance.The sash handles shall be constructedof a high pressure zinc alloy diecasting.
Window handles/sash lifts shall bemanufactured by Truth Hardware.
18.10
[82.6 mm]3.250
[28.3 mm]1.115
[28.4 mm]1.118
[84.1 mm]3.310
[101.6 mm]4.000
[9.5 mm].375
[19.2 mm].755
[96.5 mm]3.800
[4.7 mm].187
FIG. 1 18.10 SASH LIFT
FIG. 2 18.11 SASH LIFT
RECOMMENDED SCREWS: WOOD: (QTY 2) (P/N 19380) #8 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS PVC/METAL: (QTY 2) #10 PHILLIPS, FLAT HEAD (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS: WOOD: (QTY 2) (P/N 19380) #10 X 1.0 PHILLIPS, FLAT HEAD, SHEET METAL SCREWS PVC/METAL: (QTY 2) #10 PHILLIPS, FLAT HEAD (LENGTH AND THREAD TYPE TO BE DETERMINED BY PROFILE)
SASH LIFTS
17a
FIG. 3 18.16 SASH LIFT
[24.7 mm].972
[32.4 mm]1.275
[8.7 mm].341
[22.9 mm].900
[42 mm]1.654
[19.0 mm].750
[88.9 mm]3.498
[24.8 mm].978
[3.2 mm].126
[103.2 mm]4.063
[7.2 mm].282
FIG. 4 11861.XX SASH LIFT
RECOMMENDED SCREWS: (QTY 2) #8-32 PHILLIPS FLAT HEAD SREW (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE)
RECOMMENDED SCREWS: (QTY 2) #8-32 PHILLIPS FLAT HEAD SREW (LENGTH AND THREAD TYPETO BE DETERMINED BY PROFILE)
18.10 SASH LIFTS
17b
18.10 SASH LIFTS
17c
[17 mm].650
[1.3 mm].050
[4.4 mm].175
ROUTINGR.375
[19.0 mm].750
[7.6 mm]
WOOD: (QTY 2) (P/N 19051) #6 X 1" PHILLIPS FLAT HEAD SHEET METAL SCREWS.
[32 mm]1.250
[63.5 mm]2.500
[7.1 mm]Ø.281
FIG. 5 30665.XX RECESSED SASH LIFT
[18.9 mm].745
[4.3 mm].170
[101.6 mm]4.000
.300
RECOMMENDED SCREWS:
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
WINDOW ROLLERS
18
DOUBLE HUNG
SLIDER
Truth Hardware offers a wonderfulseries of rollers designed specificallyfor the window market. Truth’s 4231and 4233 Series Window Rollers helpcreate almost effortless travel for sliderwindows. Available with brass wheelsand mounted into a sturdy nylon case,Truth’s Window Rollers will producelong-lasting reliable service for thehomeowner. Truth’s window rollers arerated for up to a 30 lb. sash (2 rollersper sash). Please refer to the followingdrawings to see the models available.
WARRANTY: Protected under theterms of the “Truth Warranty forWindow & Door Manufacturers &Authorized Distributors”. Refer toTruth’s Terms & Conditions for furtherdetails.
ORDERING INFORMATION &
OPTIONS:
Because of the variety of sliderwindows on the market, TruthHardware suggests that you contactour Product Specialists to help youidentify the components that will bestmeet your requirements. To assist us inhelping you identify the product thatyou need, please be prepared toprovide Truth with:
1. The type and style of profile thatyou are mounting the hardware to.
2. The Truth Hardware Model Numberthat you are interested in.
WINDOW ROLLERS
18a
FIG. 1 4233-1000 ROLLER
[12.7 mm].500
[36.0 mm]1.420
[35.0 mm]1.380
[10.5 mm].416
[14.1 mm].556
[1.3 mm].055
[2.2 mm].090
[11.0 mm].435
[38.1 mm]1.500
[5.8 mm].230
[34.5 mm]1.360
[35.0 mm]1.38
[38.1 mm]1.500[1.5 mm]
.062
[14.2 mm].562
[9.6 mm].380
[10.1 mm].400
[12.7 mm].500
[12.7 mm].500
[4.3 mm].170
FIG. 2 4231-1000 ROLLER
700 west bridge street, owatonna, mn 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
PIVOT BARS
19
Truth Hardware offers a complete lineof Pivot Bars designed to accommodatemost window profiles and applicationneeds. Please refer to the followingdrawings to see the models available.
WARRANTY: Protected under theterms of the “Truth Warranty forWindow & Door Manufacturers &
Authorized Distributors”. Refer to Truth’sTerms & Conditions for further details.
ORDERING INFORMATION &OPTIONS:
Because of the variety of windows onthe market, Truth Hardware suggeststhat you contact our Product Specialiststo help you identify the Pivot Bars that
will best meet your requirements. Toassist us in helping you identify theproduct that you need, please beprepared to provide Truth with:
1. The type and style of profile thatyou are mounting the hardware to.
2. The Truth Hardware ModelNumber that you are interested in.
DOUBLEHUNGSLIDER
[4.8 mm].189
[32.8 mm]1.293
[4.6 mm].180
[8.2 mm].323
[2.1 mm].083
[7.9 mm].311
[14.4 mm].568
[8.7 mm].343[0.1 cm]
.057
[0.1 cm].054
[12.3 mm]Ø.485
FIG. 1 23095 PIVOT BAR
FIG. 2 32935 LH PIVOT BAR NO WINGS
[8.0 mm].313
[10.7 mm].420
[16.2 mm].638
[7.9 mm]R.313
[17.1 mm].674
[2.1 mm].081
[2.0 mm].078
[16.9 mm].665
[9.5 mm].375
FIG. 3 32934 RH PIVOT BAR NO WINGS
2X Ø.163 Ø.280
[3.0 mm]3X Ø.120
[4.8 mm].189
[32.8 mm]1.293
[4.6 mm].180
[0.3 cm]3X Ø.120
[1.5 mm].057
[0.9 cm].343
[1.4 mm].055
[12.3 mm]Ø.485 [2.1 mm]
.083
[8.2 mm].323
[7.9 mm].311
[14.4 mm].568
PIVOT BARS
19a
FIG. 4 32937 PIVOT BAR
[4.8 mm].189
[32.8 mm]1.293
[4.6 mm].180
[3.0 mm]3X Ø.120
[1.5 mm].057
[8.7 mm].343
[1.8 mm].071
[4.7 mm].187
[2.6 mm].102
[11.8 mm].463
[1.2 cm]Ø.485
[7.9 mm].312[2.5 mm]
.100
[7.9 mm].312[14.4 mm]
.568
[14.4 mm].568
[4.8 mm].189
[32.8 mm]1.293
[4.6 mm].180
[3.0 mm]3X Ø.120
[11.8 mm].463
[12.3 mm]Ø.485
[2.5 mm].100
[7.9 mm].312
[25.4 mm]1.000
[7.9 mm].312
[14.4 mm].568
[1.5 mm].057
[8.7 mm].343
[4.7 mm].187
[2.6 mm].102
[1.8 mm].072
[1.4 mm].054
[1.4 mm].054
[25.4 mm]1.000
FIG. 5 32936 RH PIVOT BAR
FIG. 6 32794 PIVOT BAR
[0.9 mm].034
[10.1 mm].398
[2.7 mm].108
[11.9 mm].468[73.5 mm]
2.893
[15.7 mm].620
[8.9 mm].350
[7.9 mm].311
[34.1 mm]1.344
[5.9 mm].233
[33.8 mm]1.331
700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM
MISCELLANEOUS
20
Truth Hardware offers Vent Stops as anaccessory for your sliding window.These snap-fit plastic components helplimit the travel of the sliding window .
WARRANTY: Protected under theterms of the “Truth Warranty forWindow & Door Manufacturers &Authorized Distributors”. Refer to Truth’sTerms & Conditions for further details.
DOUBLEHUNGSLIDER
[26.0 mm]1.025
[55.5 mm]2.187[56.9 mm]
2.240
[15.1 mm].595
[26.0 mm]1.025
[6.1 mm].240
[2.8 mm].112
FIG. 1 22833 VENT STOP
MISCELLANEOUS
20a 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM