-
Co-polyester for 3D printingcolorFabb & 3DHubs workshop
-
Choosing the right material for the job.
Fairphonecase
Print+ 3DLabprint
-
•
•
•
•
Why 3D Hubs customers need co-polyesters.
-
•
•
•
•
Why you (the 3DHub) should print with co-polyesters.
-
Copolyester ≠ PET
What’s a co-polyester?
-
COPOLYESTER CHEMISTRY
•
•
•
•
•
•
•
What’s a co-polyester?
-
The challenge forEastman & colorFabb
What’s a co-polyester?
-
colorFabb XT colorFabb 910AcolorFabb nGen•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
What’s a co-polyester?
-
What’s a co-polyester?
-
When to choose a copolyester.… and which one.
Applications which need
heat resistance.
Creep resistanceParts under constant load
Chemical resistance,
acids, base, oils etc.
Toughness, impact
resistant.Durable applications
-
Which settings should youadapt for printing withcopolyesters?
•
•
•
•
•
-
Speed.1. Speed, temperature and layerheight.
-
Speed.
1. Speed, temperature and layerheight.
-
Speed.
1. Speed, temperature and layerheight.
-
Speed.
1. Speed, temperature and layerheight.
-
Speed.
1. Speed, temperature and layerheight.
Speed is a dynamic setting and thereforeflow mm3/s varies, but temperaturestays constant…
-
Speed.
1. Speed, temperature and layerheight.
-
Speed.
1. Speed, temperature and layerheight.
Is there a minimal extrusion speed for a certain material + hot-end combination?
-
2. Bridging with copolyesters
-
2. Bridging with copolyesters
-
2. Bridging with copolyesters
-
2. Bridging with copolyesters
-
2. Bridging with copolyesters
-
3. Bridging
-
3. Bridging
-
3. Bridging
-
3. Bridging
-
4. Retraction Usually higher retraction speed and distance compared to regular PLA settings.
-
4. Retraction Also test bigger travel distances.
-
4. Retraction
•
•
•
-
5. Part cooling / minimal layertime
cooling down below heat resistance temperature from processing temperature.
-
5. Part cooling / minimal layertime
-
5. Part cooling / minimal layertime
•
•
•
-
6. Warping
•
•
•
•
•
•
•
••
•
•
copolyesters need heatedbuildplate
-
Glass plate covered with3DLac.
6. Warping
-
Glass plate covered withBuildtak
6. Warping
-
Glass plate covered with PEI6. Warping
-
colorFabb XT colorFabb 910AcolorFabb nGen•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
Have fun [email protected]/talk