-
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)First Published: 2017-06-07
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883
-
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITEDWARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITHTHE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY,CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain versionof the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDINGANYOTHERWARRANTYHEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS"WITH ALL FAULTS.CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OFMERCHANTABILITY, FITNESS FORA PARTICULAR PURPOSEANDNONINFRINGEMENTORARISING FROMACOURSEOFDEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUTLIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERSHAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, networktopology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentionaland coincidental.
This product includes cryptographic software written by Eric Young ([email protected]).
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (https://www.openssl.org/)This product includes software written by Tim Hudson ([email protected]).
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnershiprelationship between Cisco and any other company. (1110R)
Please send general FSF & GNU inquiries to [email protected]. There are also other ways to contact the FSF. Please send broken links and other corrections or suggestions [email protected]. Please see the Translations README for information on coordinating and submitting translations of this article.Copyright © 2007, 2009, 2011 Free Software Foundation, Inc. Verbatim copying and distribution of this entire article are permitted worldwide, without royalty, in any medium, providedthis notice, and the copyright notice, are preserved. Updated: Date: 2011/06/28 02:44:32
© 2017 Cisco Systems, Inc. All rights reserved.
https://www.openssl.org/https://www.cisco.com/go/trademarkshttps://www.cisco.com/go/trademarksmailto:[email protected]://www.gnu.org/contact/mailto:[email protected]://www.gnu.org/server/standards/README.translations.html
-
C O N T E N T S
P r e f a c e Preface lv
Audience lv
Document Conventions lv
Related Documentation lvii
Documentation Feedback lvii
C H A P T E R 1 Using the APIC CLI 1
Using the NX-OS Style CLI 1
C H A P T E R 2 A Commands 5
aaa authentication login console 7
aaa authentication login default 8
aaa authentication login domain 9
aaa authentication login fallback-check 10
aaa authentication login ping-check 11
aaa banner 12
aaa group server ldap 13
aaa group server radius 14
aaa group server tacacsplus 15
aaa user default-role 16
absolute 17
access-encap 18
access-group 19
access-list 20
account-status 21
action 22
active-flow-timeout 23
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) iii
-
address-family 24
address-pool-ref 28
address-pool 29
address-range 30
address 31
admin-state-enable 32
admin 34
advertise-subnet 35
aggregate-address 36
allow-credential 37
allow-origin 38
allow-promiscuous 39
allow-self-as 40
allow-writes 41
allowed-self-as-count 42
analytics 43
application 44
area default-cost 45
area interpod 46
area l3out 47
area loopback 48
area nssa 49
area nssa default-information-originate 50
area nssa no-redistribute 51
area nssa translate 52
area range 53
area route-map 54
area stub 55
arp flooding 56
asn 57
attach-avs 58
attribute-logical-expression 59
attribute 60
authenticate 61
authentication-key-timeout 62
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)iv
Contents
-
authentication-key 64
authentication 67
auto-cost 70
auto-route-target 71
autonomous-system 72
C H A P T E R 3 B Commands 73
bandwidth 74
basedn 75
bash 76
bfd 77
bfd ip ipv6 authentication 79
bfd ip ipv6 inherit 82
bfd ip ipv6 tenant 84
bgp-fabric 86
bgp 87
binddn 89
bpdu-filter 90
breakout 91
bridge-domain-match 93
bridge-domain 94
C H A P T E R 4 C Commands 97
callhome 100
callhome test info notice emergency alert critical error debug warning node 101
catalog-version 102
cdp 103
cert-chain 107
cert 108
certificate 109
channel-group 110
channel-mode 112
ciphers 115
clear-encryption-key 116
clear-pwd-history 117
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) v
Contents
-
clear core-status controller 118
clear core-status switch 119
clear core controller 120
clear core switch 121
clear endpoints leaf tenant bridge-domain 122
clear endpoints leaf tenant bridge-domain vlan 123
clear endpoints leaf tenant vrf 124
clear firmware 125
clear snapshot file 126
clear snapshot job 127
clear techsupport controllers 128
clear techsupport switch 129
clear troubleshoot epext session report 130
clear troubleshoot eptoep session report 131
clock display-format 132
clock show-offset 133
clock timezone 134
cluster-device 135
cluster-interface 136
collect 137
comm-policy 138
community-list expanded 139
community-list standard 140
configure-avs 141
configure-dvs 142
configure 143
connection intra-service 144
connection intra-service service1 connector1 service2 connector2 copyservice 145
connection terminal provider consumer service 146
connection terminal provider consumer service connector copyservice 147
connection terminal provider consumer terminal provider consumer copyservice 148
connector 149
console 150
consumer 151
contract-id 152
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)vi
Contents
-
contract 153
contract consumer 154
contract deny 157
contract enforce 159
contract provider 160
controller-group 163
controller 164
coop-fabric 165
coop 166
copp-aggr 167
cost 168
country 169
crypto aes 170
crypto ca 171
crypto keyring 172
crypto webtoken 173
csr 174
customer-id 175
C H A P T E R 5 D Commands 177
data 179
dead-interval 180
debug log reset 181
debug log set 182
decommission controller 183
decommission switch 184
default-information 185
default-originate 187
delay 188
deny-mode 189
deploy-epg tenant application epg type 190
deploy-epg tenant application epg vlan 192
deployment-mode 194
descr 195
description 196
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) vii
Contents
-
destination-port 218
destination-profile 219
destination 220
destination address 223
destination destip 225
destination epg 226
destination external-l3 epg tenant l3out epg 228
destination external-l3 epg tenant vrf epg 230
destination interface 232
destination tenant 233
dhcp option 235
dhcp relay policy 236
dhparam 239
direction 240
disable-connected-check 243
disable-peer-as-check 244
distance 245
dns 249
dnssearchsuffix 250
dnsservers 251
dnssuffix 252
dnssvr 253
dnssvrgrp 254
domain 255
dot1q-tunnel 257
dscp 258
dsr-vip 260
dsr 261
C H A P T E R 6 E Commands 263
ebgp-multihop 265
echo-address 266
echo-mode 267
echo-rx-interval 268
email-addr 270
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)viii
Contents
-
email-contact 271
email 272
enable-bfd 273
enable-ssl 274
encap-mode 275
encap 276
encryption 277
end 278
endpoint 279
endpoint ip aging 280
endpoint loop-detect action bd-learn-disable 281
endpoint loop-detect action port-disable 282
endpoint loop-detect enable 283
endpoint loop-detect factor 284
endpoint loop-detect interval 285
endpoint move-detection 286
endpoint retention bounce-age-interval 287
endpoint retention hold-interval 288
endpoint retention local-age-interval 289
endpoint retention move-frequency 290
endpoint retention policy 291
endpoint retention remote-age-interval 292
enforce-subnet-learning 293
ep-flush 294
epg 295
eraseconfig 296
errdisable recovery cause bpduguard 297
errdisable recovery cause ep-move 298
errdisable recovery cause mcp-loop 299
errdisable recovery interval 300
erspan-id 301
erspan-version 303
evpn 305
evpn consumer 306
evpn export 307
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) ix
Contents
-
evpn import 308
evpn provider 309
exec 310
exit 311
expiration 312
expires 313
export-config 314
export 315
exporter 317
extcommunity-list expanded 318
extcommunity-list standard 319
external-l2 320
external-l3 321
external-l3 epg 322
external-routed-domain 323
C H A P T E R 7 F Commands 325
fabric-external 327
fabric-internal 328
fabric clear 329
fabric show 330
fc 331
fcoe 332
fcoe fcmap 334
fcoe fka-adv-period 335
fcoe vsan vlan loadbalancing 336
fctimer e-d-tov 338
fctimer r-a-tov 339
feature 341
fex-interface-group 342
fex-profile 343
fex 344
file 346
filter 347
filter tenant bd 349
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)x
Contents
-
filter tenant vrf 350
fips mode 351
firewall-logging 352
firewall 353
firmware-version 354
firmware 355
firmware repository add 356
firmware repository delete 357
firmware upgrade controller-group 358
firmware upgrade switch-group 359
first-file 360
first-name 361
flow-exporter 362
flow 363
flow exporter 364
flow monitor 366
flow node-policy 367
flow record 369
flow timeout collection 370
flow timeout template 371
flow vm-exporter 372
forged-transmits 373
format 374
forward-error-correction 375
C H A P T E R 8 G Commands 377
global-name 378
graceful-restart-helper 379
graceful-restart 380
group 382
C H A P T E R 9 H Commands 383
hello-interval 384
host-rt-leak 385
hsrp delay 386
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xi
Contents
-
hsrp enable-bfd 387
hsrp group 388
hsrp use-bia 389
hsrp version 390
http 391
https 392
C H A P T E R 1 0 I Commands 393
idle-flow-timeout 400
immediacy-immediate 401
import-config 402
inband-mgmt 403
inband-mgmt epg 404
inherit-from-epg 405
inherit 407
inherit analytics-policy 414
inherit bfd 415
inherit bgp 416
inherit bgp address-family 417
inherit bgp dampening 418
inherit eigrp 419
inherit fc-fabric-policy 421
inherit fc-leaf-policy 422
inherit hsrp 423
inherit ipv4 424
inherit ipv6 425
inherit isis-fabric 428
inherit node-control-policy 429
inherit node-only 430
inherit ntp-fabric 431
inherit pod-group 432
inherit snmp-fabric 433
inherit vsan-attribute 434
instance 435
interface 436
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xii
Contents
-
interface ethernet 439
interface inband-mgmt0 441
interface mgmt0 442
interface port-channel 443
interface vfc-po 445
interface vfc 446
interface vlan 447
interface vpc 448
interpod 449
ip 450
ip address-range 453
ip address 455
ip address tenant application 459
ip address tenant external-l2 461
ip address tenant external-l3 463
ip bandwidth 465
ip bfd 468
ip dhcp relay address tenant application 471
ip dhcp relay address tenant external-l2 474
ip dhcp relay address tenant external-l3 475
ip distribute-list eigrp 476
ip dscp 478
ip flow 480
ip hello-interval 484
ip hold-interval 487
ip igmp 490
ip igmp allow-v3-asm 491
ip igmp fast-leave 493
ip igmp group-timeout 495
ip igmp inherit 497
ip igmp last-member-query-count 499
ip igmp last-member-query-response-time 501
ip igmp querier-timeout 502
ip igmp query-interval 504
ip igmp query-max-response-time 506
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xiii
Contents
-
ip igmp report-link-local-groups 508
ip igmp report-policy 510
ip igmp robustness-variable 512
ip igmp snooping 514
ip igmp snooping access-group route-map leaf interface ethernet ethernet vlan 515
ip igmp snooping access-group route-map leaf interface port-channel vlan 516
ip igmp snooping access-group route-map vpc context interface vpc vlan 517
ip igmp snooping fast-leave 518
ip igmp snooping last-member-query-interval 519
ip igmp snooping policy 520
ip igmp snooping querier 521
ip igmp snooping query-interval 522
ip igmp snooping query-max-response-time 523
ip igmp snooping startup-query-count 524
ip igmp snooping startup-query-interval 525
ip igmp snooping static-group leaf interface ethernet ethernet vlan 526
ip igmp snooping static-group leaf interface port-channel vlan 527
ip igmp snooping static-group vpc context interface vpc vlan 528
ip igmp ssm-translate 529
ip igmp startup-query-count 530
ip igmp startup-query-interval 532
ip igmp state-limit 534
ip igmp state-limit reserved 536
ip igmp static-oif 538
ip igmp version 540
ip multicast 542
ip next-hop-self 543
ip ospf authentication-key 546
ip ospf authentication 548
ip ospf bfd 550
ip ospf cost 552
ip ospf dead-interval 554
ip ospf hello-interval 556
ip ospf inherit 558
ip ospf mtu-ignore 560
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xiv
Contents
-
ip ospf network 561
ip ospf passive-interface 563
ip ospf prefix-suppression 564
ip ospf priority 566
ip ospf retransmit-interval 568
ip ospf transmit-delay 570
ip passive-interface 572
ip pim 575
ip pim auto-rp forward 576
ip pim auto-rp listen 577
ip pim auto-rp mapping-agent-policy 578
ip pim border 579
ip pim bsr bsr-policy 580
ip pim bsr forward 581
ip pim bsr listen 582
ip pim dr-delay 583
ip pim dr-priority 585
ip pim fast-convergence 587
ip pim hello-authentication 588
ip pim hello-interval 590
ip pim inherit 592
ip pim jp-interval 593
ip pim jp-policy 595
ip pim mtu 597
ip pim neighbor-policy 598
ip pim passive 600
ip pim register-rate-limit 601
ip pim register-source 602
ip pim rp-address 603
ip pim sg-expiry-timer 604
ip pim sparse 605
ip pim ssm route-map 606
ip pim state-limit 607
ip pim state-limit reserved 608
ip pim strict-rfc-compliant 609
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xv
Contents
-
ip pim use-shared-tree-only 611
ip prefix-list 612
ip prefix-list permit le 613
ip prefix 614
ip prefix permit le 615
ip router eigrp 616
ip router ospf default 618
ip shared address consumer 620
ip shared address provider 621
ip split-horizon 622
ip summary-address eigrp 625
ip throughput-delay 627
ip ttl 630
ipobtainmode 632
iprange 633
ipv6 634
ipv6 address-range 636
ipv6 address 638
ipv6 address tenant application 642
ipv6 address tenant external-l2 644
ipv6 address tenant external-l3 646
ipv6 bandwidth 648
ipv6 bfd 650
ipv6 dhcp relay address tenant application 652
ipv6 dhcp relay address tenant external-l2 653
ipv6 dhcp relay address tenant external-l3 654
ipv6 distribute-list eigrp 655
ipv6 flow 657
ipv6 hello-interval 661
ipv6 hold-interval 663
ipv6 link-local 665
ipv6 nd hop-limit 667
ipv6 nd managed-config-flag 670
ipv6 nd mtu 672
ipv6 nd ns-interval 675
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xvi
Contents
-
ipv6 nd ns-retries 678
ipv6 nd other-config-flag 681
ipv6 nd policy 683
ipv6 nd prefix 684
ipv6 nd ra-interval 686
ipv6 nd ra-lifetime 689
ipv6 nd reachable-time 692
ipv6 nd retrans-timer 695
ipv6 nd suppress-ra-mtu 698
ipv6 nd suppress-ra 700
ipv6 next-hop-self 702
ipv6 ospf bfd 704
ipv6 ospf cost 706
ipv6 ospf dead-interval 708
ipv6 ospf hello-interval 710
ipv6 ospf inherit 712
ipv6 ospf mtu-ignore 714
ipv6 ospf network 715
ipv6 ospf passive-interface 717
ipv6 ospf prefix-suppression 718
ipv6 ospf priority 720
ipv6 ospf retransmit-interval 722
ipv6 ospf transmit-delay 724
ipv6 passive-interface 726
ipv6 router eigrp 728
ipv6 router ospf default 730
ipv6 shared address consumer 732
ipv6 shared address provider 733
ipv6 split-horizon 734
ipv6 summary-address eigrp 736
ipv6 throughput-delay 738
isis 740
isolation 741
C H A P T E R 1 1 K Commands 743
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xvii
Contents
-
key 744
C H A P T E R 1 2 L Commands 745
l2-unknown-unicast 748
l2protocol-tunnel 749
l3-unknown-multicast 750
l3out 751
l4l7-cluster 752
l4l7-peer 753
l4l7 754
l4l7 cluster import-from 755
l4l7 cluster name 756
l4l7 graph 757
l4l7 resource-pool 758
label 759
label match 760
label name 761
lacp fast-select-hot-standby 762
lacp graceful-convergence 763
lacp load-defer 764
lacp max-links 765
lacp min-links 767
lacp port-priority 769
lacp port-priority interface 771
lacp rate 772
lacp rate fast normal interface 774
lacp suspend-individual 775
lacp symmetric-hash 776
last-name 777
layer2-switched flow 778
ldap-server attribute 782
ldap-server basedn 783
ldap-server filter 784
ldap-server host 785
ldap-server retries 786
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xviii
Contents
-
ldap-server timeout 787
leaf-group 788
leaf-interface-group 789
leaf-interface-profile 790
leaf-policy-group 792
leaf-profile 793
leaf 794
legacy 796
link 797
lldp 801
lldp holdtime 805
lldp reinit 806
lldp timer 807
load-balance 808
local-as 810
locality 812
logfile 813
logging 814
logging audit 815
logging description 816
logging event 817
logging fault 818
logging server-group 819
logging session 820
logging severity 821
logit 823
logit severity dest-grp server node 824
lsp-fast-flood 825
lsp-gen-interval 826
lsp-mtu 827
C H A P T E R 1 3 MCommands 829
mac-address 832
mac-changes 835
mac-learning 836
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xix
Contents
-
match-precedence 837
match 838
match arp 840
match bridge-domain 841
match dscp 842
match icmp 843
match ip 844
match ip multicast group 845
match ip multicast group rp 846
match ip multicast group rp source 847
match ip multicast group source 848
match ip multicast group source rp 849
match ip multicast rp 850
match ip multicast rp group 851
match ip multicast rp group source 852
match ip multicast rp source 853
match ip multicast rp source group 854
match ip multicast source 855
match ip multicast source group 856
match ip multicast source group rp 857
match ip multicast source rp 858
match ip multicast source rp group 859
match ipv6 860
match prefix-list 861
match raw 862
match route group 863
match tcp 864
match udp 865
max-lsa 866
max-validity-period 868
max concurrent 869
max running 870
maxas-limit 871
maximum-paths 872
maximum-prefix 875
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xx
Contents
-
mcp 877
mcp action 880
mcp control pdu-per-vlan 881
mcp description 882
mcp enable 883
mcp factor 884
mcp init-delay 885
mcp transmit-frequency 886
member 887
message-level 888
message-size 889
metric 890
mgmt-connectivity-pref 892
mgmt-epg 893
microsoft-domain 894
microsoft 895
min-rx 896
min-tx 898
min 900
mode 901
modulus 902
monitor 903
monitor access 904
monitor fabric 905
monitor tenant 906
monitor virtual 907
mtu-ignore 908
mtu 909
multi-destination 913
multi-site-mac-address 914
multicast-address 915
multiplier 916
C H A P T E R 1 4 N Commands 919
name-alias 920
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxi
Contents
-
name-lookup 924
name 925
negotiate 926
neighbor 929
network 931
next-hop-self 932
node-control 933
npv 934
npv auto-load-balance 935
npv traffic-map external-interface vfc-po 936
npv traffic-map external-interface vfc 938
npv traffic-map server-interface vfc-po 939
npv traffic-map server-interface vfc 941
ntp 943
C H A P T E R 1 5 O Commands 945
oob-mgmt 946
oob-mgmt epg 947
optimize 948
option 949
org-name 950
org-unit-name 951
C H A P T E R 1 6 P Commands 953
passive-interface 955
passphrase 956
password 957
password change-count 959
password change-during-interval 960
password change-interval 961
password change-password 962
password history-count 963
password no-change-interval 964
password pwd-strength-check 965
path 966
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxii
Contents
-
pause 967
peer-dead-interval 968
periodic-inventory notification 969
phone-contact 970
phone 971
pod-profile 972
pod 973
pods 974
policy-group 975
policy-map type control-plane-if 977
policy-map type control-plane-leaf 978
policy-map type control-plane-spine 979
policy-map type data-plane 980
policy-map type qos 981
port 982
porttrack delay 985
porttrack minlinks 986
porttrack state 987
power 988
preempt 989
preempt delay 990
prefix-suppression 992
preview 993
priority-flow-control 994
priority 997
priv-type 1000
priv 1001
private-as-control 1002
profile-type 1003
protocol 1004
protocol bps 1005
provider 1006
proxy-arp 1007
pwd-lifetime 1008
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxiii
Contents
-
C H A P T E R 1 7 Q Commands 1009
qos 1010
qos parameters 1011
qos preserve 1012
query-profile 1013
query 1014
queue control 1015
queue limit 1016
quota 1017
C H A P T E R 1 8 R Commands 1019
radius-server host 1021
radius-server retries 1022
radius-server timeout 1023
rbac role 1024
rbac rule 1025
rbac security-domain 1026
realm 1027
record 1028
recurring 1029
redir-dest 1030
redirect 1031
redistribute 1032
redundancy-mode 1033
region 1034
reload controller 1035
reload switch 1036
remote-as 1037
remote 1038
replace-controller replace 1040
replace-controller reset 1041
request-status-count 1042
reset-to-factory 1043
response-incl 1044
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxiv
Contents
-
response-subtree 1045
retransmit-interval 1046
retries 1047
reverse-port 1048
revision 1049
role 1050
route-control 1051
route-map 1052
route-profile 1055
route-reflector 1056
route-target 1057
router-id 1059
router bgp 1061
router eigrp 1062
router ospf 1063
rtr-cfg 1064
run-mode 1065
C H A P T E R 1 9 S Commands 1067
sampling-rate 1092
schedule 1093
scheduler 1094
scheduling 1095
scope 1096
scvmm 1098
second-file 1099
security-domain 1100
security 1101
security allow-promiscuous 1102
security forged-transmits 1103
security mac-changes 1104
send-community 1105
server 1106
service-policy 1109
service 1114
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxv
Contents
-
session-record-flags 1115
set 1116
set addcommunity 1119
set burst 1124
set cir 1125
set community 1126
set conform-cos-transmit 1133
set conform-dscp-transmit 1134
set conform 1135
set dampening 1136
set dscp-code 1141
set dscp 1142
set exceed-cos-transmit 1143
set exceed-dscp-transmit 1144
set exceed 1145
set excessive-burst 1146
set local-preference 1147
set metric-type 1151
set metric 1155
set mode 1159
set next-hop 1160
set pir 1164
set qos-class 1165
set tag 1167
set target-dscp 1171
set type 1172
set violate-cos-transmit 1173
set violate-dscp-transmit 1174
set violate 1175
set weight 1176
shellinabox 1180
show aaa authentication 1181
show aaa groups 1182
show access-list 1183
show accounting log 1184
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxvi
Contents
-
show acllog deny l2 flow 1185
show acllog deny l2 flow tenant vrf 1186
show acllog deny l2 flow tenant vrf detail 1187
show acllog deny l2 pkt 1188
show acllog deny l2 pkt tenant vrf 1189
show acllog deny l2 pkt tenant vrf detail 1190
show acllog deny l3 flow 1191
show acllog deny l3 flow tenant vrf 1192
show acllog deny l3 flow tenant vrf detail 1193
show acllog deny l3 pkt 1194
show acllog deny l3 pkt tenant vrf 1195
show acllog deny l3 pkt tenant vrf detail 1196
show acllog permit l2 flow tenant vrf 1198
show acllog permit l2 flow tenant vrf detail 1199
show acllog permit l2 pkt tenant vrf 1200
show acllog permit l2 pkt tenant vrf detail 1201
show acllog permit l3 flow tenant vrf 1202
show acllog permit l3 flow tenant vrf detail 1203
show acllog permit l3 pkt tenant vrf 1204
show acllog permit l3 pkt tenant vrf detail 1205
show analytics 1207
show application 1208
show audits 1209
show audits tenant 1210
show audits tenant application 1211
show audits tenant application epg 1212
show audits tenant bridge-domain 1213
show audits tenant bridge-domain detail 1214
show audits tenant dnsservergroup 1215
show audits tenant dnsservergroup server 1216
show audits tenant dnsservergroup server domain 1217
show audits tenant interface bridge-domain 1218
show audits tenant interface bridge-domain detail 1219
show audits tenant multicast-route-maps 1220
show audits tenant vrf 1221
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxvii
Contents
-
show audits tenant vrf acllog l2 1222
show audits tenant vrf acllog l3 1223
show audits tenant vrf detail 1225
show audits tenant vrf external-l3 bgp 1226
show audits tenant vrf external-l3 bgp node 1227
show audits tenant vrf external-l3 eigrp 1228
show audits tenant vrf external-l3 eigrp detail 1229
show audits tenant vrf external-l3 epg 1230
show audits tenant vrf external-l3 epg detail 1231
show audits tenant vrf external-l3 epg name 1232
show audits tenant vrf external-l3 epg name detail 1233
show audits tenant vrf external-l3 interfaces 1234
show audits tenant vrf external-l3 interfaces detail 1235
show audits tenant vrf external-l3 ospf 1236
show audits tenant vrf external-l3 ospf detail 1237
show audits tenant vrf external-l3 static-route 1238
show audits tenant vrf external-l3 static-route detail 1239
show audits tenant vrf external-l3 static-route node 1240
show audits tenant vrf external-l3 static-route node detail 1241
show audits tenant vrf multicast 1242
show bridge-domain 1243
show bridge-domain detail 1244
show callhome 1245
show callhome common destination-profile 1246
show callhome common query-profile 1247
show callhome common transport-email 1248
show catalog 1249
show cli command 1250
show cli internal audit 1251
show cli internal transaction 1252
show cli internal usage 1253
show cli list 1254
show cli manpage 1255
show cli path 1256
show clock 1257
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxviii
Contents
-
show communication ciphers 1258
show communication controller 1259
show communication http 1260
show communication https 1261
show communication shellinabox 1262
show communication ssh-service 1263
show communication telnet 1264
show communication web-requests 1265
show contract-type 1266
show contract 1267
show controller 1268
show controller detail 1269
show cores 1270
show cores status 1271
show debug counter 1272
show debug log 1273
show deployment endpoint node 1274
show dns-address 1275
show dns-domain 1276
show dot1q-tunnel 1277
show endpoints 1278
show endpoints leaf interface ethernet 1279
show endpoints leaf interface port-channel 1280
show endpoints vpc 1281
show epg 1282
show epg detail 1283
show events 1284
show events controller 1285
show events controller detail 1286
show events leaf 1287
show events leaf fex 1288
show events leaf fex module 1289
show events leaf interface ethernet 1290
show events leaf interface l3instance 1291
show events leaf interface mgmt 1292
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxix
Contents
-
show events leaf interface portchannel 1293
show events leaf interface tunnel 1294
show events leaf inventory chassis 1295
show events leaf inventory fans 1296
show events leaf inventory module 1297
show events leaf inventory module fabricport 1298
show events leaf inventory module leafport 1299
show events leaf inventory powersupply 1300
show events leaf inventory supervisor 1301
show events leaf protocol 1302
show events leaf vpc 1303
show events leaf vrf 1304
show events spine 1305
show events spine interface ethernet 1306
show events spine interface l3instance 1307
show events spine interface mgmt 1308
show events spine interface tunnel 1309
show events spine inventory chassis 1310
show events spine inventory fabric 1311
show events spine inventory fans 1312
show events spine inventory module 1313
show events spine inventory module fabricport 1314
show events spine inventory powersupply 1315
show events spine inventory supervisor 1316
show events spine inventory system 1317
show events spine protocol 1318
show events spine vrf 1319
show events tenant 1320
show events tenant application 1321
show events tenant application epg 1322
show events tenant bridge-domain 1323
show events tenant bridge-domain detail 1324
show events tenant dnsservergroup 1325
show events tenant dnsservergroup server 1326
show events tenant dnsservergroup server domain 1327
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxx
Contents
-
show events tenant endpoints 1328
show events tenant endpoints leaf interface ethernet 1329
show events tenant endpoints leaf interface port-channel 1330
show events tenant endpoints vpc 1331
show events tenant interface bridge-domain 1333
show events tenant interface bridge-domain detail 1334
show events tenant multicast-route-maps 1335
show events tenant vrf 1336
show events tenant vrf acllog l2 1337
show events tenant vrf acllog l3 1338
show events tenant vrf detail 1340
show events tenant vrf external-l3 bgp 1341
show events tenant vrf external-l3 bgp node 1342
show events tenant vrf external-l3 eigrp 1343
show events tenant vrf external-l3 eigrp detail 1344
show events tenant vrf external-l3 epg 1345
show events tenant vrf external-l3 epg detail 1346
show events tenant vrf external-l3 epg name 1347
show events tenant vrf external-l3 epg name detail 1348
show events tenant vrf external-l3 interfaces 1349
show events tenant vrf external-l3 interfaces detail 1350
show events tenant vrf external-l3 ospf 1351
show events tenant vrf external-l3 ospf detail 1352
show events tenant vrf external-l3 route-map 1353
show events tenant vrf external-l3 route-map detail 1354
show events tenant vrf external-l3 static-route 1355
show events tenant vrf external-l3 static-route detail 1356
show events tenant vrf external-l3 static-route node 1357
show events tenant vrf external-l3 static-route node detail 1358
show events tenant vrf multicast 1359
show external-l2 epg 1360
show external-l2 epg name 1361
show external-l2 epg tenant 1362
show external-l3 bgp 1363
show external-l3 bgp tenant 1364
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxxi
Contents
-
show external-l3 bgp tenant vrf 1365
show external-l3 bgp tenant vrf node 1366
show external-l3 eigrp 1367
show external-l3 eigrp detail 1368
show external-l3 eigrp node 1369
show external-l3 eigrp node detail 1370
show external-l3 eigrp tenant 1371
show external-l3 eigrp tenant detail 1372
show external-l3 eigrp tenant vrf 1373
show external-l3 eigrp tenant vrf detail 1374
show external-l3 eigrp tenant vrf node 1375
show external-l3 eigrp tenant vrf node detail 1376
show external-l3 epg 1377
show external-l3 epg detail 1378
show external-l3 epg name 1379
show external-l3 epg name detail 1380
show external-l3 epg tenant 1381
show external-l3 epg tenant detail 1382
show external-l3 epg tenant vrf 1383
show external-l3 epg tenant vrf detail 1384
show external-l3 interfaces 1385
show external-l3 interfaces detail 1386
show external-l3 interfaces node 1387
show external-l3 interfaces node detail 1388
show external-l3 interfaces tenant 1389
show external-l3 interfaces tenant detail 1390
show external-l3 interfaces tenant vrf 1391
show external-l3 interfaces tenant vrf detail 1392
show external-l3 interfaces tenant vrf node 1393
show external-l3 interfaces tenant vrf node detail 1394
show external-l3 ospf 1395
show external-l3 ospf detail 1396
show external-l3 ospf node 1397
show external-l3 ospf node detail 1398
show external-l3 ospf tenant 1399
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxxii
Contents
-
show external-l3 ospf tenant detail 1400
show external-l3 ospf tenant vrf 1401
show external-l3 ospf tenant vrf detail 1402
show external-l3 ospf tenant vrf node 1403
show external-l3 ospf tenant vrf node detail 1404
show external-l3 route-map 1405
show external-l3 route-map detail 1406
show external-l3 route-map name 1407
show external-l3 route-map name detail 1408
show external-l3 route-map tenant 1409
show external-l3 route-map tenant detail 1410
show external-l3 route-map tenant vrf 1411
show external-l3 route-map tenant vrf detail 1412
show external-l3 route-map tenant vrf node 1413
show external-l3 route-map tenant vrf node detail 1414
show external-l3 static-route 1415
show external-l3 static-route detail 1416
show external-l3 static-route node 1417
show external-l3 static-route node detail 1418
show external-l3 static-route tenant 1419
show external-l3 static-route tenant detail 1420
show external-l3 static-route tenant vrf 1421
show external-l3 static-route tenant vrf detail 1422
show external-l3 static-route tenant vrf node 1423
show external-l3 static-route tenant vrf node detail 1424
show fabric-recovery status 1425
show faults 1426
show faults controller 1428
show faults controller detail 1429
show faults l4l7-cluster 1430
show faults l4l7-graph 1431
show faults leaf 1432
show faults leaf fex 1433
show faults leaf fex module 1434
show faults leaf interface ethernet 1435
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxxiii
Contents
-
show faults leaf interface l3instance 1436
show faults leaf interface mgmt 1437
show faults leaf interface portchannel 1438
show faults leaf interface tunnel 1439
show faults leaf inventory chassis 1440
show faults leaf inventory fans 1441
show faults leaf inventory module 1442
show faults leaf inventory module fabricport 1443
show faults leaf inventory module leafport 1444
show faults leaf inventory powersupply 1445
show faults leaf inventory supervisor 1446
show faults leaf protocol 1447
show faults leaf vpc 1448
show faults leaf vrf 1449
show faults microsoft domain 1450
show faults microsoft domain name 1451
show faults microsoft domain name hyperv 1452
show faults microsoft domain name port-group 1453
show faults microsoft domain name scvmm 1454
show faults microsoft domain name vm 1455
show faults microsoft domain name vm name 1456
show faults quota 1457
show faults spine 1458
show faults spine interface ethernet 1459
show faults spine interface l3instance 1460
show faults spine interface mgmt 1461
show faults spine interface tunnel 1462
show faults spine inventory chassis 1463
show faults spine inventory fabric 1464
show faults spine inventory fans 1465
show faults spine inventory module 1466
show faults spine inventory module fabricport 1467
show faults spine inventory powersupply 1468
show faults spine inventory supervisor 1469
show faults spine inventory system 1470
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxxiv
Contents
-
show faults spine protocol 1471
show faults spine vrf 1472
show faults tenant 1473
show faults tenant application 1474
show faults tenant application epg 1475
show faults tenant bridge-domain 1476
show faults tenant bridge-domain detail 1477
show faults tenant dnsservergroup 1478
show faults tenant dnsservergroup server 1479
show faults tenant dnsservergroup server domain 1480
show faults tenant interface bridge-domain 1481
show faults tenant interface bridge-domain detail 1482
show faults tenant multicast-route-maps 1483
show faults tenant vrf 1484
show faults tenant vrf acllog l2 1485
show faults tenant vrf acllog l3 1486
show faults tenant vrf detail 1488
show faults tenant vrf external-l3 bgp 1489
show faults tenant vrf external-l3 bgp node 1490
show faults tenant vrf external-l3 eigrp 1491
show faults tenant vrf external-l3 eigrp detail 1492
show faults tenant vrf external-l3 epg 1493
show faults tenant vrf external-l3 epg detail 1494
show faults tenant vrf external-l3 epg name 1495
show faults tenant vrf external-l3 epg name detail 1496
show faults tenant vrf external-l3 interfaces 1497
show faults tenant vrf external-l3 interfaces detail 1498
show faults tenant vrf external-l3 ospf 1499
show faults tenant vrf external-l3 ospf detail 1500
show faults tenant vrf external-l3 static-route 1501
show faults tenant vrf external-l3 static-route detail 1502
show faults tenant vrf external-l3 static-route node 1503
show faults tenant vrf external-l3 static-route node detail 1504
show faults tenant vrf multicast 1505
show faults vmware domain 1506
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxxv
Contents
-
show faults vmware domain name 1507
show faults vmware domain name epg 1508
show faults vmware domain name esx 1509
show faults vmware domain name port-group 1510
show faults vmware domain name trunk-portgroup 1511
show faults vmware domain name vcenter 1512
show faults vmware domain name vm 1513
show faults vmware domain name vm name 1514
show fips 1515
show fips status 1516
show firmware repository 1517
show firmware repository detail 1518
show firmware upgrade status 1519
show firmware upgrade status controller-group 1520
show firmware upgrade status controller-group detail 1521
show firmware upgrade status detail 1522
show firmware upgrade status switch-group 1523
show firmware upgrade status switch-group detail 1524
show flow exporter 1525
show flow exporter infra 1526
show flow exporter tenant 1527
show flow monitor 1528
show flow monitor infra 1529
show flow monitor tenant 1530
show flow node-policy 1531
show flow node-policy detail 1532
show flow record 1533
show flow record infra 1534
show flow record tenant 1535
show flow vm-exporter 1536
show health 1537
show health leaf 1538
show health leaf fex 1539
show health leaf fex module 1540
show health leaf interface ethernet 1541
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxxvi
Contents
-
show health leaf interface l3instance 1542
show health leaf interface mgmt 1543
show health leaf interface portchannel 1544
show health leaf interface tunnel 1545
show health leaf inventory chassis 1546
show health leaf inventory fans 1547
show health leaf inventory module 1548
show health leaf inventory module fabricport 1549
show health leaf inventory module leafport 1550
show health leaf inventory powersupply 1551
show health leaf inventory supervisor 1552
show health leaf protocol 1553
show health leaf vpc 1554
show health leaf vrf 1555
show health spine 1556
show health spine interface ethernet 1557
show health spine interface l3instance 1558
show health spine interface mgmt 1559
show health spine interface tunnel 1560
show health spine inventory chassis 1561
show health spine inventory fabric 1562
show health spine inventory fans 1563
show health spine inventory module 1564
show health spine inventory module fabricport 1565
show health spine inventory powersupply 1566
show health spine inventory supervisor 1567
show health spine inventory system 1568
show health spine protocol 1569
show health spine vrf 1570
show health tenant 1571
show health tenant application 1572
show health tenant application epg 1573
show health tenant bridge-domain 1574
show health tenant bridge-domain detail 1575
show health tenant dnsservergroup 1576
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxxvii
Contents
-
show health tenant dnsservergroup server 1577
show health tenant dnsservergroup server domain 1578
show health tenant interface bridge-domain 1579
show health tenant interface bridge-domain detail 1580
show health tenant multicast-route-maps 1581
show health tenant vrf 1582
show health tenant vrf acllog l2 1583
show health tenant vrf acllog l3 1584
show health tenant vrf detail 1586
show health tenant vrf external-l3 bgp 1587
show health tenant vrf external-l3 bgp node 1588
show health tenant vrf external-l3 eigrp 1589
show health tenant vrf external-l3 eigrp detail 1590
show health tenant vrf external-l3 epg 1591
show health tenant vrf external-l3 epg detail 1592
show health tenant vrf external-l3 epg name 1593
show health tenant vrf external-l3 epg name detail 1594
show health tenant vrf external-l3 interfaces 1595
show health tenant vrf external-l3 interfaces detail 1596
show health tenant vrf external-l3 ospf 1597
show health tenant vrf external-l3 ospf detail 1598
show health tenant vrf external-l3 static-route 1599
show health tenant vrf external-l3 static-route detail 1600
show health tenant vrf external-l3 static-route node 1601
show health tenant vrf external-l3 static-route node detail 1602
show health tenant vrf multicast 1603
show inband-mgmt 1604
show inband-mgmt controller 1605
show inband-mgmt switch 1606
show interface bridge-domain 1607
show interface bridge-domain detail 1608
show ip interface bridge-domain 1609
show ipv6 interface bridge-domain 1610
show l4l7-cluster 1611
show l4l7-graph 1612
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xxxviii
Contents
-
show l4l7-package 1613
show ldap-server 1614
show locator-led 1615
show locator-led status leaf 1616
show microsoft domain 1617
show microsoft domain name 1618
show microsoft domain name hyperv 1619
show microsoft domain name port-group 1620
show microsoft domain name scvmm 1621
show microsoft domain name vm 1622
show microsoft domain name vm name 1623
show microsoft vm 1624
show monitor access 1625
show monitor fabric 1626
show monitor tenant 1627
show monitor virtual 1628
show name-alias tenant 1629
show name-alias tenant acl 1630
show name-alias tenant application 1631
show name-alias tenant application epg 1632
show name-alias tenant bridge-domain 1633
show name-alias tenant contract 1634
show name-alias tenant contract subject 1635
show name-alias tenant l3out 1636
show name-alias tenant vrf 1637
show ntpq 1638
show oob-mgmt 1639
show oob-mgmt controller 1640
show oob-mgmt switch 1641
show pd-recovery status 1642
show policy-map 1643
show policy-map type data-plane 1644
show policy-map type qos 1645
show port-channel leaf 1646
show port-channel map 1647
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xxxix
Contents
-
show port-channel map leaf 1648
show quota 1649
show radius-server 1650
show resource 1651
show resource conflict encap-vlan epg 1652
show resource conflict encap-vlan epg node 1653
show role 1654
show running-config 1655
show sessions 1656
show sessions controller 1657
show sessions controller detail 1658
show sessions leaf 1659
show sessions spine 1660
show snapshot active 1661
show snapshot files 1662
show snapshot jobs 1663
show snmp 1664
show snmp clientgroups 1665
show snmp community 1666
show snmp engineid 1667
show snmp hosts 1668
show snmp summary 1669
show snmp users 1670
show stats 1671
show stats granularity communication controller 1672
show stats granularity leaf 1673
show stats granularity leaf fex 1674
show stats granularity leaf fex module 1675
show stats granularity leaf interface ethernet 1676
show stats granularity leaf interface mgmt 1677
show stats granularity leaf interface portchannel 1678
show stats granularity leaf inventory chassis 1679
show stats granularity leaf inventory fans 1680
show stats granularity leaf inventory powersupply 1681
show stats granularity leaf inventory supervisor 1682
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xl
Contents
-
show stats granularity spine 1683
show stats granularity spine interface ethernet 1684
show stats granularity spine interface mgmt 1685
show stats granularity spine inventory chassis 1686
show stats granularity spine inventory fabric 1687
show stats granularity spine inventory fans 1688
show stats granularity spine inventory module 1689
show stats granularity spine inventory powersupply 1690
show stats granularity spine inventory supervisor 1691
show stats granularity spine inventory system 1692
show stats granularity tenant 1693
show stats granularity tenant application 1694
show stats granularity tenant application epg 1695
show stats granularity tenant dnsservergroup 1696
show stats granularity tenant dnsservergroup server 1697
show stats granularity tenant dnsservergroup server domain 1698
show stats granularity tenant dot1q-tunnel 1699
show stats granularity tenant multicast-route-maps 1700
show stats granularity tenant vrf 1701
show stats granularity tenant vrf acllog l2 1702
show stats granularity tenant vrf acllog l3 1703
show stats granularity tenant vrf detail 1704
show stats granularity tenant vrf external-l3 bgp 1705
show stats granularity tenant vrf external-l3 bgp node 1706
show stats granularity tenant vrf external-l3 eigrp 1707
show stats granularity tenant vrf external-l3 eigrp detail 1708
show stats granularity tenant vrf external-l3 epg 1709
show stats granularity tenant vrf external-l3 epg detail 1710
show stats granularity tenant vrf external-l3 epg name 1711
show stats granularity tenant vrf external-l3 epg name detail 1712
show stats granularity tenant vrf external-l3 interfaces 1713
show stats granularity tenant vrf external-l3 interfaces detail 1714
show stats granularity tenant vrf external-l3 ospf 1715
show stats granularity tenant vrf external-l3 ospf detail 1716
show stats granularity tenant vrf external-l3 static-route 1717
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xli
Contents
-
show stats granularity tenant vrf external-l3 static-route detail 1718
show stats granularity tenant vrf external-l3 static-route node 1719
show stats granularity tenant vrf external-l3 static-route node detail 1720
show stats granularity tenant vrf multicast 1721
show switch 1722
show switch detail 1723
show tacacs-server 1724
show techsupport all 1725
show techsupport controllers 1726
show techsupport host 1727
show techsupport switch 1728
show tenant 1729
show tenant access-list 1730
show tenant application 1731
show tenant application endpoints 1732
show tenant application endpoints leaf interface ethernet 1733
show tenant application endpoints leaf interface port-channel 1734
show tenant application endpoints vpc 1735
show tenant application epg 1736
show tenant application epg detail 1737
show tenant application epg endpoints 1738
show tenant application epg endpoints leaf interface ethernet 1739
show tenant application epg endpoints leaf interface port-channel 1740
show tenant application epg endpoints vpc 1741
show tenant bridge-domain 1743
show tenant bridge-domain detail 1744
show tenant contract-type 1745
show tenant contract 1746
show tenant detail 1747
show tenant dnsservergroup 1748
show tenant dnsservergroup server 1749
show tenant dnsservergroup server domain 1750
show tenant dot1q-tunnel 1751
show tenant endpoints 1752
show tenant endpoints leaf interface ethernet 1753
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xlii
Contents
-
show tenant endpoints leaf interface port-channel 1754
show tenant endpoints vpc 1755
show tenant epg 1756
show tenant epg detail 1757
show tenant external-l2 epg 1758
show tenant interface bridge-domain 1759
show tenant interface bridge-domain detail 1760
show tenant ip interface bridge-domain 1761
show tenant ipv6 interface bridge-domain 1762
show tenant multicast-route-maps 1763
show tenant policy-map 1764
show tenant policy-map type data-plane 1765
show tenant policy-map type qos 1766
show tenant vrf 1767
show tenant vrf acllog l2 1768
show tenant vrf acllog l3 1769
show tenant vrf detail 1770
show tenant vrf external-l3 bgp 1771
show tenant vrf external-l3 bgp node 1772
show tenant vrf external-l3 eigrp 1773
show tenant vrf external-l3 eigrp detail 1774
show tenant vrf external-l3 epg 1775
show tenant vrf external-l3 epg detail 1776
show tenant vrf external-l3 epg name 1777
show tenant vrf external-l3 epg name detail 1778
show tenant vrf external-l3 interfaces 1779
show tenant vrf external-l3 interfaces detail 1780
show tenant vrf external-l3 ospf 1781
show tenant vrf external-l3 ospf detail 1782
show tenant vrf external-l3 route-map 1783
show tenant vrf external-l3 route-map detail 1784
show tenant vrf external-l3 static-route 1785
show tenant vrf external-l3 static-route detail 1786
show tenant vrf external-l3 static-route node 1787
show tenant vrf external-l3 static-route node detail 1788
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xliii
Contents
-
show tenant vrf multicast 1789
show troubleshoot epext session 1790
show troubleshoot epext session atomiccounter 1791
show troubleshoot epext session audit 1792
show troubleshoot epext session contracts 1793
show troubleshoot epext session deployments 1794
show troubleshoot epext session events 1795
show troubleshoot epext session faults 1796
show troubleshoot epext session latency 1797
show troubleshoot epext session monitor 1798
show troubleshoot epext session reports 1799
show troubleshoot epext session statistics 1800
show troubleshoot epext session topology 1801
show troubleshoot epext session traceroute 1802
show troubleshoot epext sessions 1803
show troubleshoot eptoep session 1804
show troubleshoot eptoep session atomiccounter 1805
show troubleshoot eptoep session audit 1806
show troubleshoot eptoep session contracts 1807
show troubleshoot eptoep session deployments 1808
show troubleshoot eptoep session events 1809
show troubleshoot eptoep session faults 1810
show troubleshoot eptoep session latency 1811
show troubleshoot eptoep session monitor 1812
show troubleshoot eptoep session reports 1813
show troubleshoot eptoep session statistics 1814
show troubleshoot eptoep session topology 1815
show troubleshoot eptoep session traceroute 1816
show troubleshoot eptoep sessions 1817
show username 1818
show username detail 1819
show version 1820
show vlan-domain 1821
show vmm internal debug 1822
show vmm internal debug epg 1823
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xliv
Contents
-
show vmm internal debug mac 1824
show vmware domain 1825
show vmware domain name 1826
show vmware domain name epg 1827
show vmware domain name esx 1828
show vmware domain name port-group 1829
show vmware domain name trunk-portgroup 1830
show vmware domain name vcenter 1831
show vmware domain name vm 1832
show vmware domain name vm name 1833
show vmware vm 1834
show vpc 1835
show vpc map leaf 1836
show vrf 1837
show vrf detail 1838
show vsan-domain 1839
shut 1840
shutdown 1841
site-id 1845
slow-drain congestion-timeout action 1846
slow-drain congestion-timeout count 1849
slow-drain pause 1852
slow-timer 1855
snapshot download 1856
snapshot export 1857
snapshot import 1858
snapshot rollback 1859
snapshot upload 1860
snmp-server clientgroup 1861
snmp-server community 1862
snmp-server contact 1863
snmp-server host 1864
snmp-server location 1865
snmp-server protocol 1866
snmp-server user 1867
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xlv
Contents
-
source 1868
source application 1870
source interface ethernet 1871
source interface port-channel 1872
source interface vpc 1873
spanning-tree 1874
spanning-tree bpdu-filter 1878
spanning-tree bpdu-guard 1879
speed 1880
spf-interval 1883
spine-group 1884
spine-interface-group 1885
spine-interface-policy-group 1886
spine-interface-profile 1888
spine-policy-group 1889
spine-profile 1890
spine 1891
ssh-key 1892
ssh-service 1893
ssl-protocols 1894
ssl-validation-level 1895
state 1896
static-endpoint 1897
static-tep 1901
statistics 1905
storm-control broadcast level 1906
storm-control broadcast pps 1909
storm-control level 1912
storm-control multicast level 1915
storm-control multicast pps 1918
storm-control pps 1921
storm-control unicast level 1924
storm-control unicast pps 1927
street-address 1930
subject 1931
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xlvi
Contents
-
subnet 1932
summary-address 1933
svcredir-pol 1934
switch-group 1935
switch 1936
switching 1937
switchport 1938
switchport access vlan tenant application 1940
switchport access vlan tenant external-svi 1944
switchport mode 1947
switchport port-security maximum 1951
switchport port-security timeout 1954
switchport port-security violation 1957
switchport tenant 1960
switchport trunk allowed vlan inband-mgmt 1963
switchport trunk allowed vlan tenant application 1964
switchport trunk allowed vlan tenant external-l2 1968
switchport trunk allowed vlan tenant external-svi 1971
switchport trunk allowed vlan tenant legacy-forwarding 1974
switchport trunk allowed vsan tenant application 1977
switchport trunk native vlan tenant application 1980
switchport trunk native vlan tenant external-svi 1984
switchport vepa 1987
switchport vlan 1990
switchport vsan 1993
switchport vsan tenant application 1996
syslog 1997
system cluster-size 1998
system controller-id 1999
system dynamic-load-balance 2000
system fabric-security-mode 2001
system jumbomtu 2002
system pod 2003
system switch-id 2004
system use-infra-gipo 2005
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xlvii
Contents
-
C H A P T E R 2 0 T Commands 2007
tacacs-server host 2011
tacacs-server retries 2012
tacacs-server timeout 2013
tag 2014
target 2016
telnet 2017
template bfd 2018
template bgp address-family 2020
template bgp timers 2021
template dhcp option 2022
template dhcp relay 2023
template eigrp interface-policy 2024
template eigrp vrf-policy 2025
template endpoint retention policy 2026
template fc-fabric-policy 2027
template fc-leaf-policy 2028
template hsrp group-policy 2029
template hsrp interface-policy 2030
template ip igmp interface-policy 2031
template ip igmp snooping policy 2032
template ip pim interface-policy 2033
template ipv6 nd policy 2034
template ipv6 nd prefix 2036
template isis-fabric 2037
template leaf-policy-group 2038
template ntp-fabric 2039
template ospf interface-policy 2040
template ospf vrf-policy 2041
template pod-group 2042
template policy-group 2043
template port-channel 2044
template route-profile 2045
template route group 2047
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)xlviii
Contents
-
template route tag 2048
template snmp-fabric 2049
template spine-interface-policy-group 2050
template spine-policy-group 2051
template vsan-attribute 2052
tenant 2053
terminal 2054
time 2055
time start daily 2056
time start weekly 2057
timeout 2058
timers 2059
timers lsa-arrival 2063
timers lsa-group-pacing 2064
timers throttle lsa 2065
timers throttle spf 2067
tp 2069
transmit-delay 2070
transport 2071
transport email from 2073
transport email mail-server 2074
transport email reply-to 2075
trigger fabric-recovery 2076
trigger shutdown 2077
trigger snapshot download 2078
trigger snapshot export 2079
trigger snapshot import 2080
trigger snapshot rollback 2081
trigger snapshot upload 2082
trigger techsupport all 2083
trigger techsupport controllers 2084
trigger techsupport host 2085
trigger techsupport local 2086
trigger techsupport switch 2087
trigger troubleshoot epext session report 2088
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) xlix
Contents
-
trigger troubleshoot eptoep session report 2089
trigger vmware 2090
troubleshoot epext session atomiccounter 2091
troubleshoot epext session description 2092
troubleshoot epext session latestminutes 2093
troubleshoot epext session monitor destination apic 2094
troubleshoot epext session monitor destination prefdestgroup 2095
troubleshoot epext session monitor destination tenant 2096
troubleshoot epext session scheduler 2098
troubleshoot epext session srcextip destip tenant application 2099
troubleshoot epext session srcextip destip tenant vrf 2100
troubleshoot epext session srcip tenant application epg destextip 2101
troubleshoot epext session srcip tenant vrf destextip 2102
troubleshoot epext session starttime 2103
troubleshoot epext session traceroute 2104
troubleshoot epext session traceroute protocol icmp 2105
troubleshoot epext session traceroute protocol tcp 2106
troubleshoot epext session traceroute protocol udp 2107
troubleshoot eptoep session atomiccounter 2108
troubleshoot eptoep session description 2109
troubleshoot eptoep session latestminutes 2110
troubleshoot eptoep session monitor destination apic 2111
troubleshoot eptoep session monitor destination prefdestgroup 2112
troubleshoot eptoep session monitor destination tenant 2113
troubleshoot eptoep session scheduler 2115
troubleshoot eptoep session srcip tenant application epg destip tenant application 2116
troubleshoot eptoep session srcip tenant application epg destip tenant vrf 2117
troubleshoot eptoep session srcip tenant vrf destip tenant application 2118
troubleshoot eptoep session srcip tenant vrf destip tenant vrf 2119
troubleshoot eptoep session srcmac tenant application epg destmac tenant application 2120
troubleshoot eptoep session srcmac tenant application epg destmac tenant vrf 2122
troubleshoot eptoep session srcmac tenant vrf destmac tenant application 2124
troubleshoot eptoep session srcmac tenant vrf destmac tenant vrf 2126
troubleshoot eptoep session starttime 2128
troubleshoot eptoep session traceroute 2129
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)l
Contents
-
troubleshoot eptoep session traceroute protocol icmp 2130
troubleshoot eptoep session traceroute protocol tcp 2131
troubleshoot eptoep session traceroute protocol udp 2132
trunk-portgroup 2133
trusted-key 2134
try 2135
C H A P T E R 2 1 U Commands 2137
ui-idle-timeout-seconds 2138
unicast 2139
update-source ethernet 2140
update-source loopback 2141
update-source vlan 2142
usage 2143
use-bia 2144
use-keyring 2145
use-vrf 2146
user 2147
username 2148
C H A P T E R 2 2 V Commands 2149
vcenter 2151
vemcmd show avs 2152
vemcmd show cdp 2153
vemcmd show dfw connection 2154
vemcmd show dfw flows 2155
vemcmd show dfw globals 2156
vemcmd show dfw interfaces 2157
vemcmd show dfw port-drop 2158
vemcmd show dfw session 2159
vemcmd show dfwdenyflows 2160
vemcmd show dfwflows ftp 2161
vemcmd show dfwflows internal 2162
vemcmd show dfwflows ltl 2163
vemcmd show dfwslflows 2164
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) li
Contents
-
vemcmd show epp 2165
vemcmd show heap 2166
vemcmd show host 2167
vemcmd show l2 2168
vemcmd show lacp 2169
vemcmd show lldp 2170
vemcmd show mempool 2171
vemcmd show microsegment tables brief 2172
vemcmd show microsegment tables info 2173
vemcmd show opflex 2174
vemcmd show packets 2175
vemcmd show pc 2176
vemcmd show pd-port 2177
vemcmd show port 2178
vemcmd show portmac 2179
vemcmd show proxy-arp 2180
vemcmd show sod 2181
vemcmd show span 2182
vemcmd show stats cookie 2183
vemcmd show useg all 2184
vemcmd show useg tables brief 2185
vemcmd show useg tables info 2186
vemcmd show useg unresolved 2187
vemcmd show version 2188
vemcmd show vlan 2189
vemsend 2190
version 2191
vlan-domain 2193
vlan-pool 2198
vlan-range 2199
vlan 2200
vmware-domain 2202
vnic 2204
vpc context 2205
vpc domain consecutive 2206
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)lii
Contents
-
vpc domain explicit 2207
vpc domain reciprocal 2208
vrf-blacklist-mode 2209
vrf 2210
vsan-domain 2219
vsan 2222
vxlan 2223
C H A P T E R 2 3 WCommands 2225
webtoken-timeout-seconds 2226
weight 2227
where 2228
where detail 2229
whitelist-blacklist-mix 2230
winservers 2231
C H A P T E R 2 4 Z Commands 2233
zone 2234
zones 2235
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) liii
Contents
-
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)liv
Contents
-
Preface
• Audience, page lv
• Document Conventions, page lv
• Related Documentation, page lvii
• Documentation Feedback, page lvii
AudienceThis guide is intended for network and systems administrators who configure and maintain the ApplicationCentric Infrastructure fabric.
Document ConventionsCommand descriptions use the following conventions:
DescriptionConvention
Bold text indicates the commands and keywords that you enter literallyas shown.
bold
Italic text indicates arguments for which the user supplies the values.Italic
Square brackets enclose an optional element (keyword or argument).[x]
Square brackets enclosing keywords or arguments separated by a verticalbar indicate an optional choice.
[x | y]
Braces enclosing keywords or arguments separated by a vertical barindicate a required choice.
{x | y}
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) lv
-
DescriptionConvention
Nested set of square brackets or braces indicate optional or requiredchoices within optional or required elements. Braces and a vertical barwithin square brackets indicate a required choice within an optionalelement.
[x {y | z}]
Indicates a variable for which you supply values, in context where italicscannot be used.
variable
A nonquoted set of characters. Do not use quotation marks around thestring or the string will include the quotation marks.
string
Examples use the following conventions:
DescriptionConvention
Terminal sessions and information the switch displays are in screen font.screen font
Information you must enter is in boldface screen font.boldface screen font
Arguments for which you supply values are in italic screen font.italic screen font
Nonprinting characters, such as passwords, are in angle brackets.< >
Default responses to system prompts are in square brackets.[ ]
An exclamation point (!) or a pound sign (#) at the beginning of a lineof code indicates a comment line.
!, #
This document uses the following conventions:
Means reader take note. Notes contain helpful suggestions or references to material not covered in themanual.
Note
Means reader be careful. In this situation, you might do something that could result in equipment damageor loss of data.
Caution
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)lvi
PrefaceDocument Conventions
-
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before youwork on any equipment, be aware of the hazards involved with electrical circuitry and be familiar withstandard practices for preventing accidents. Use the statement number provided at the end of each warningto locate its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Warning
Related DocumentationCisco Application Centric Infrastructure (ACI) Documentation
The ACI documentation is available at the following URL: http://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.html.
Cisco Application Centric Infrastructure (ACI) Simulator Documentation
The Cisco ACI Simulator documentation is available at http://www.cisco.com/c/en/us/support/cloud-systems-management/application-centric-infrastructure-simulator/tsd-products-support-series-home.html.
Cisco Nexus 9000 Series Switches Documentation
The Cisco Nexus 9000 Series Switches documentation is available at http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/tsd-products-support-series-home.html.
Cisco Application Virtual Switch Documentation
The Cisco Application Virtual Switch (AVS) documentation is available at http://www.cisco.com/c/en/us/support/switches/application-virtual-switch/tsd-products-support-series-home.html.
Cisco Application Centric Infrastructure (ACI) Integration with OpenStack Documentation
Cisco ACI integration with OpenStack documentation is available at http://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.html.
Documentation FeedbackTo provide technical feedback on this document, or to report an error or omission, please send your commentsto [email protected]. We appreciate your feedback.
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) lvii
PrefaceRelated Documentation
http://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-centric-infrastructure-simulator/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-centric-infrastructure-simulator/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/switches/application-virtual-switch/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/switches/application-virtual-switch/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlhttp://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.htmlmailto:[email protected]
-
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)lviii
PrefaceDocumentation Feedback
-
Using the APIC CLI
• Using the NX-OS Style CLI, page 1
Using the NX-OS Style CLI
The APIC NX-OS style CLI uses similar syntax and other conventions to the Cisco NX-OS CLI, but theAPIC operating system is not a version of Cisco NX-OS software. Do not assume that a Cisco NX-OSCLI command works with or has the same function on the APIC CLI.
Note
Abbreviating Commands
You can abbreviate commands and keywords by entering the first few characters of a command. Theabbreviation must include sufficient characters to make it unique from other commands or keywords. If youare having trouble entering a command, check the system prompt and enter the question mark (?) for a list ofavailable commands. You might be in the wrong command mode or using incorrect syntax. Commandabbreviation is shown in the following example:
apic1# show aaa authenticationDefault : localConsole : local
apic1# sh aa aDefault : localConsole : local
Command Completion
To complete a command or keyword after entering an abbreviated string, press the Tab key. The CLI completesthe command or keyword only if the partial string matches only one command or keyword.
Some commands, such as show hardware internal power-management, require the Tab key for partialcompletion and the ESC key for the remainder of the completion.
Note
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) 1
-
Viewing Command Options
After typing a partial command, you can display the command options by typing a question mark (?), as shownin the following example:
apic1# show aaa ?authentication Show AAA Authentication informationgroups Show AAA group information
Command History
The history buffer stores the previous commands you entered. Using the Up arrow key (or typing Ctrl-P), youcan recall commands in the history buffer, beginning with the most recent command. Repeat the key sequenceto recall successively older commands. To return to more recent commands in the history buffer after recallingcommands, use the Down arrow key or type Ctrl-N).
Filtering show Command Output
You can use the vertical bar (|) with any show command and include a filter option and filtering expression.The filtering is performed by matching each output line with a regular expression. By selecting different filteroptions you can include or exclude all output that matches the expression. You can also display all outputbeginning with the line that matches the expression.
An example of filtering options with the show command is as follows:
apic1# show aaa authenticationDefault : localConsole : local
apic1# show aaa authentication | grep ConsoleConsole : localapic1#
Displaying a List of Commands and Syntax
To display a list of CLI commands and their syntax, use the show cli list command, as shown in the followingexample
apic1# show cli list[ ][mode] [None ] exec[cfg ][mode] [exec ] configure [['terminal', 't']][cfg ][mode] [configure ] power redundancy-policy [cfg ][cmd ] [power ] redundancy-mode combined|ps-redundant|redundant...
You can filter the output of this command, as shown in the following example:
apic1# show cli list | grep ntp[cfg ][mode] [pod ] ntp[cfg ][cmd ] [ntp ] authenticate[cfg ][cmd ] [ntp ] authentication-key [md5 ]...
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)2
Using the APIC CLIUsing the NX-OS Style CLI
-
Negating a Command with the no Prefix
Almost every configuration command has a no form that can be used to disable a feature, revert to a defaultvalue, or remove a configuration.
To disable a feature, remove a created object, or revert a configuration setting to its default value, mostconfiguration commands can be preceded with the prefix 'no'.
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) 3
Using the APIC CLIUsing the NX-OS Style CLI
-
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)4
Using the APIC CLIUsing the NX-OS Style CLI
-
A Commands
• aaa authentication login console, page 7
• aaa authentication login default, page 8
• aaa authentication login domain, page 9
• aaa authentication login fallback-check, page 10
• aaa authentication login ping-check, page 11
• aaa banner, page 12
• aaa group server ldap, page 13
• aaa group server radius, page 14
• aaa group server tacacsplus, page 15
• aaa user default-role, page 16
• absolute, page 17
• access-encap, page 18
• access-group, page 19
• access-list, page 20
• account-status, page 21
• action, page 22
• active-flow-timeout, page 23
• address-family, page 24
• address-pool-ref, page 28
• address-pool, page 29
• address-range, page 30
• address, page 31
• admin-state-enable, page 32
• admin, page 34
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) 5
-
• advertise-subnet, page 35
• aggregate-address, page 36
• allow-credential, page 37
• allow-origin, page 38
• allow-promiscuous, page 39
• allow-self-as, page 40
• allow-writes, page 41
• allowed-self-as-count, page 42
• analytics, page 43
• application, page 44
• area default-cost, page 45
• area interpod, page 46
• area l3out, page 47
• area loopback, page 48
• area nssa, page 49
• area nssa default-information-originate, page 50
• area nssa no-redistribute, page 51
• area nssa translate, page 52
• area range, page 53
• area route-map, page 54
• area stub, page 55
• arp flooding, page 56
• asn, page 57
• attach-avs, page 58
• attribute-logical-expression, page 59
• attribute, page 60
• authenticate, page 61
• authentication-key-timeout, page 62
• authentication-key, page 64
• authentication, page 67
• auto-cost, page 70
• auto-route-target, page 71
• autonomous-system, page 72
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)6
A Commands
-
aaa authentication login consoleaaa authentication login console
Description: Configure console methods
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# aaa authentication login console
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) 7
A Commandsaaa authentication login console
-
aaa authentication login defaultaaa authentication login default
Description: Configure default methods
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# aaa authentication login default
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)8
A Commandsaaa authentication login default
-
aaa authentication login domainaaa authentication login domain
Description: Configure domain methods
Syntax:
Login domain nameWORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# aaa authentication login domain
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) 9
A Commandsaaa authentication login domain
-
aaa authentication login fallback-checkaaa authentication login fallback-check
Description: checks if default auth servers are active or not before allowing fallback login
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# aaa authentication login fallback-check
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)10
A Commandsaaa authentication login fallback-check
-
aaa authentication login ping-checkaaa authentication login ping-check
Description: Enables ICMP health check of AAA servers
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# aaa authentication login ping-check
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) 11
A Commandsaaa authentication login ping-check
-
aaa banneraaa banner
Description: CLI informational banner to be displayed before user login (wrap with single quotes)
Syntax:
CLI informational banner to be displayed before user login (wrap withsingle quotes) (Max Size None)
LINE
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# aaa banner
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)12
A Commandsaaa banner
-
aaa group server ldapaaa group server ldap
Description: LDAP server group name.
Syntax:
LDAP server group nameWORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# aaa group server ldap
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) 13
A Commandsaaa group server ldap
-
aaa group server radiusaaa group server radius
Description: RADIUS server group name.
Syntax:
RADIUS server group nameWORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# aaa group server radius
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)14
A Commandsaaa group server radius
-
aaa group server tacacsplusaaa group server tacacsplus
Description: TACACS+ server group name.
Syntax:
TACACS+ server group nameWORD
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# aaa group server tacacsplus
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) 15
A Commandsaaa group server tacacsplus
-
aaa user default-roleaaa user default-role
Description: Default role assigned by aaa-admin for remote authentication
Syntax:
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']](config)# aaa user default-role
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)16
A Commandsaaa user default-role
-
absoluteabsolute window
Description: Absolute window configuration mode
Syntax:
Configure scheduler windowwindow
Window name (Max size 31)WORD
Command Mode: scheduler : Scheduler configuration mode
Command Path:
# configure [['terminal', 't']](config)# scheduler fabric|controller schedule (config-scheduler)# absolute window
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1) 17
A Commandsabsolute
-
access-encapaccess-encap vlan
Description: set the access-vlan for the qinq tunnel
Syntax:
Encapsulation Vlanvlan
Encapsulation Vlan. Number range from=1 to=4094
Command Mode: dot1q-tunnel : Tunnel configuration mode
Command Path:
# configure [['terminal', 't']](config)# tenant (config-tenant)# dot1q-tunnel (config-tenant-tunnel)#access-encap vlan
Cisco APIC NX-OS Style CLI Command Reference, Release 2.3(1)18
A Commandsaccess-encap
-
access-groupaccess-group