Download - Chapter2
![Page 1: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/1.jpg)
1
Chapter 2Chapter 2
Material HandlingMaterial Handling
![Page 2: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/2.jpg)
2
IntroductionIntroduction Definition – the movement, storage, protection and
control of material (MHIA). The purpose is to handle safely, efficiently, at low
cost, on time, accurately, and without damage to the material.
Advantages – safer operating condition, lower cost, better utilization and better performance of material handling systems.
![Page 3: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/3.jpg)
3
ExamplesExamples
Movement – industrial trucks and robots. Storage – rack, drawer, bins. Protection – wooden pallet, pallet box, tote box. Control – bar codes, magnetic stripes, radio
frequency tags.
![Page 4: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/4.jpg)
4
Position of MHPosition of MH
Automation and control technologies in the production system
![Page 5: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/5.jpg)
5
Equipments of MHEquipments of MHCategories of the equipment includes:
1. Transport.
2. Storage.
3. Unitizing.
4. Identification.
![Page 6: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/6.jpg)
6
TransportTransportUsed to move material inside a factory.1. Industrial trucks – non-powered and powered.2. Automated guided vehicles – battery-powered and
automatically steered.3. Rail guided vehicle – self-propelled and
independently operating.4. Conveyors – move material over fixed paths in
large quantities.5. Cranes and hoists – horizontal travel and vertical
lifting for heavy loads. Manually or powered operating.
![Page 7: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/7.jpg)
7
Industrial TrucksIndustrial Trucks The non-powered types are often referred as
hand trucks because they are pushed or pulled by human workers
Quantities of material moved and distances are relatively low
Classified as either two-wheel or multiple-wheel
Examples of non-powered industrial are shown in Figure 1
![Page 8: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/8.jpg)
8
F our w heel dolly
Two-wheel truck
Four wheel
dolly
Hand-operated low-lift pallet truck
Figure 1
![Page 9: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/9.jpg)
9
Powered truck are self-propelled to relieve the worker of manually having to move the truck
Three common types are used in factories and warehouse are walkie trucks, fork lift truck and towing tractor
![Page 10: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/10.jpg)
10
Walkie truck
Fork lift
truck
Towing tractor
![Page 11: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/11.jpg)
11
Automated Guided Vehicle Automated Guided Vehicle SystemsSystems An automated guided vehicle system (AGVS)
is a material handling system that uses independently operated, self-propelled vehicles guided along defined pathways
The pathways for AGVS is unobtrusive An AGVS is appropriate where different
materials are moved from various load points to various unload points
Suitable for automating material handling in batch production and mixed production
![Page 12: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/12.jpg)
12
Three types of AGV : (a) driveless automated guided train, (b) AGV pallet truck, (c) Unit load carrier
![Page 13: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/13.jpg)
13
Monorails and other rail Monorails and other rail guided vehiclesguided vehicles
Monorail is the motorized vehicles that are guided by a fixed rail system
Are typically suspended overhead from the ceiling
Rail guided vehicles pick up electrical power from an electrified rail
Electrified overhead monorails are used to move large components and subassemblies in its manufacturing operations
![Page 14: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/14.jpg)
14
Conveyor SystemConveyor System Conveyors are used material must be moved
in relatively large quantities between specific locations over a fixed path
The fixed path is implemented by a track system, which may be in-the-floor, above-the-floor or overhead
Divide into two categories : (1) powered(2) non-powered
Examples of powered conveyors are shown in Figure 3 and Figure 4
![Page 15: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/15.jpg)
15
Roller conveyor
Belt (flat)conveyorSkate wheel
conveyor
Figure 3
![Page 16: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/16.jpg)
16
Overhead trolley conveyor
Cart-on-track conveyor
In-floor towline conveyor
Figure 4
![Page 17: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/17.jpg)
17
Cranes and HoistCranes and Hoist Cranes are used for horizontal movement of
materials in a facility, and hoists are used for vertical lifting.
A hoist is a mechanical device that can be used to raise and lower loads
Cranes include a variety of material handling equipment designed for lifting and moving heavy loads using one or more overhead beams for support
Types of cranes : bridge cranes, gantry cranes and jib cranes
![Page 18: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/18.jpg)
18
Jib crane with hoist
(a) Bridge crane (b) Gantry crane
A hoist
![Page 19: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/19.jpg)
19
StorageStorage To store materials for a period of time. To permit access when required. Storage performance is measured according to the
capacity, density, accessibility and throughput. There are bulk storage, rack systems, bins, drawer
storage and automated storage systems.
![Page 20: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/20.jpg)
20
High density bulk storage provides low accessibility and bulk storage with loads arranged to form rows and blocks for improved accessibility
![Page 21: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/21.jpg)
21
Pallet rack system for storage of unit loads on pallet
![Page 22: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/22.jpg)
22
Drawer storage
![Page 23: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/23.jpg)
23
A unit load autom ated s torage/retr ieval s ys tem
![Page 24: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/24.jpg)
24A horizontal storage carousel
![Page 25: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/25.jpg)
25
UnitizingUnitizing Containers used to hold individual items for
protection. Equipment used to load and package the containers. Examples: wooden pallet, pallet box and tote box.
![Page 26: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/26.jpg)
26
IdentificationIdentification To collect the data in material handling
automatically. There are three basic components: encoder data,
machine reader and decoder. Examples of technologies: bar codes, magnetic
stripes, radio frequency tags and machine vision.
![Page 27: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/27.jpg)
27
Stationary moving beam bar code scanner located along a moving conveyor
![Page 28: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/28.jpg)
28
Material Handling SystemMaterial Handling SystemThere are some considerations before design the system as follows:
1. Material characteristics.
2. Flow rate, routing, and scheduling.
3. Plan layout.
![Page 29: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/29.jpg)
29
Principle of MHPrinciple of MH The purpose is to be applicable in the analysis,
design and operation of MH system.1. Planning2. Standard3. Work4. Ergonomic5. Unit load6. Space utilization7 System8. Automation9. Environment 10. Life cycle cost
![Page 30: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/30.jpg)
30
AUTOMATIC DATA AUTOMATIC DATA CAPTURECAPTURE
Automatic data capture (ADC) also known as automatic identification and data capture (AIDC).
Refers to the technologies that provide direct entry of data into a computer or other microprocessor controlled system without using a keyboard.
Used to collect data in material handling and manufacturing applications
![Page 31: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/31.jpg)
31
Material handling : shipping and receiving, storage, sortation
and order picking Manufacturing :
Monitoring the status of order processing, work-in-process and worker attendance.
![Page 32: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/32.jpg)
32
Component of ADCConsists of three component :Encoded data A code is a set of symbols or signals
representing alphanumeric characters When data are encoded, the characters
are translated into a machine-readable code
A label or tag containing the encoded data is attached to the item that is to be later identified
![Page 33: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/33.jpg)
33
Machine reader or scanner This device reads the encoded data,
converting them to alternative form, usually an electrical analog signal
Decoder This component transforms the electrical
signal into digital data and finally back into original alphanumeric characters
![Page 34: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/34.jpg)
34
Categories of ADC Can be divided into six :Optical Use high-contrast graphical symbols that
can be interpreted by an optical scanner Include bar codes, optical character
recognition and machine visionMagnetic Encode data magnetically, similar to
recording tape Include magnetic stripe and magnetic ink
character recognition
![Page 35: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/35.jpg)
35
Electromagnetic : Radio frequencySmart card Refers to small plastic cards (the size of credit
card) imbedded with microchips capable of containing large amounts of information
Touch techniques : Touch screen and button memoryBiometric To identify humans or interpret vocal commands
of human Include voice recognition, fingerprint analysis
and retinal eye scans
![Page 36: Chapter2](https://reader036.vdocuments.site/reader036/viewer/2022062703/5553b912b4c905d4448b4ea2/html5/thumbnails/36.jpg)
36
Most widely used in industry :1. Bar codes2. Radio frequency 3. Magnetic stripe4. Optical character recognition5. Machine vision