CATALOGUEGATES ANDDOORS2020
Automations for gates, garage doors, pedestrian doors, road barriers and
outdoor led lighting
6
NEW ACCESSORIES
EGO
PLUS KEYPAD VIA RADIO EGKTR1 (to be paired with all Key Automation receivers)
PLUS KEY SELECTOR EGS1
PLUS KEYPAD VIA PowerBUS EGKTB1 e EGKTB2 (to be paired with EGKD2 decoder)
Touch keyboard via radio 433.920 MHz rolling code with integrated antenna
Backlighting with RGB LED in 7 selectable colours
Energy saving mode: the lighting switches off during the day, controlled by an environment sensor
Silent mode: possibility of turning off the buzzer
Powered by AAA batteries easily available commercially
Easy customisation of the access code
New design
200 key combinations available
All-metal body
Tamper-proof screw
Touch keyboard via PowerBUS with 2-wire power supply
Backlighting with RGB LED in 7 selectable colours
Rainbow feature for automatic colour changing
Energy saving mode: the lighting switches off during the day, controlled by a night sensor
Silent mode: possibility of turning off the buzzer
Power supply: 10-24 Vac and 12-34 Vdc
Flush-mounted version compatible with LEGRAND® 080021 built-in box and other commonly available ones
Hand-brushed and painted metal bottom (optional)
Possibility of generating time-sensitive access codes
Easy access code customisation up to 50 codes, installer action not required
Possibility of rolling out the system to up to 20 devices connected in parallel to the PowerBUS
Decoder with 2 programmable relays (impulse, bistable and timed types)
Database access management via app and cloud server: ideal for B&Bs, gyms, small garages (only for EGKTB2)
7
79 mm 21,65 mm
79 m
m
15,8 mm
Ø 6
0 m
m
EGKTB1Touch keypadvia PowerBUS
EGKTR12-channel touch keypad
via radio
EGKTB2Touch keypad via PowerBUS
with Bluetooth and clock
EGS1Key selector with
all-metal body
DIMENSIONS
MODELS
COLOURS
BU
ILT-
IN V
ER
SIO
N
WA
LL V
ER
SIO
N
KEYPADEGKTB1
KEYPADEGKTB2
DECODEREGKD2
PowerVac 10-24 10-24 10-24
Vdc 12-34 12-34 12-34
Absorbed powerTypical 0,25 W 0,35 W 0,2 W
Max 0,5 W 0,7 W 1,5 W
N° of outputs - - 2
Maximum cable length m 50 m with 2x0,35 mm2 cable
N° of memorized codes - - 50
Max n° of devices connected to the PowerBUS line 20
Relay characteristics - -Clean contact
50V 0,2A(resistive load)
Operating temperature °C -10 +55
Protection degree IP 55 55 30
Wall
8
NEW ELECTROMECHANICAL GEAR MOTOR WITH ARTICULATED ARM FOR SWING GATES WITH LEAVES UP TO 2,3 m, 24 Vdc
Available in two versions, with articulated arm or sliding arm for reduced openings
Ideal for narrow columns or pillars with reduced dimensions. Compact shape and silent movement, made of strong die-cast aluminum and UV resistant covers
The unlocking system is simple and intuitive, also possible using the transmitter Sub.
Optional unlock from the outside
Even more compact size. Installation height just 5 cm from ground level.
The product combines a lighting system with an articulated arm gear motor. Designed for swing gates made of aluminum, PVC or wood leaves
Simplified adjustment of the on-board mechanical stops
The articulated arm allows the installation of RÉVO in all those difficult situations where there is a significant depth between the leaf and the column, or with very narrow columns (10x10 cm).
DIMENSIONS
MODELS
PLUS
RÉVO
CODE DESCRIPTION
REP2024 For swing gates with maximum length 2,3 m or weight 250 kg, 24 Vdc motor with Night Light System
REP2024S For swing gates with maximum length 2,3 m or weight 250 kg, 24 Vdc motor. Without control unit. With Night Light System
REP2224 For swing gates with maximum length 2,3 m or weight 250 kg, 24 Vdc motor
REP2224S For swing gates with maximum length 2,3 m or weight 250 kg, 24 Vdc motor. Without control unit.
9
More intuitive programming thanks to 3-colour LEDs, dip-switches and trimmers
Possibility of cancelling one transmitter at a time
Possibility of storing transmitters of the SUB-F series
Motor torque adjustable via a trimmer
Light courtesy time adjustable via a trimmer
Safety test function
Maximum motor power 700 W
Flash light maximum output power 60 W
Accessories power 3.6 W
PLUS
NEW CONTROL UNIT 230 Vac
CT1RS
CT1RSELECTRICAL DATAInput power Vac/Hz 230/50Output power accessories Vdc 24 not stabilizedMaximum current of external devices on 24 Vdc mA 150Consumption W 2Max motor power W 700Maximum output power courtesy light W 60230 Vac output protection Quick 5A fuse (F1)GENERIC DATAIntegrated receiver capability 250 codesIntegrated receiver frequency MHz 433,92Protection degree IP 54Dimensions (L - D - H) mm 123 - 90 - 40Operating temperature °C -20 + 55
10
A circle of light. Literally.
This is the effect the motor seeks to create in the garage, also serving as a stylish LED lamp.
HALO combines the functions of automation and lighting, extending the Night Light System concept created by Key Automation.
The light fitting brings an exclusive touch to the garage and enables the installer to connect automation and LED lighting in a single operation.
The heart of the innovation is also its technology, with a choice of conventional installation or two new mounting positions, on the cross beam or embracing the spring shaft.
These two new installation modes not only speed up fitting and wiring times but also make the lighting unit the main feature, minimising the automation’s visual impact.
HALO enjoys all the benefits of the KUBE “IoT” platform: programming via smartphone, potential malfunction alerts to both installer and user, remote assistance by installer, door opening and closure by smartphone and time-band access control.
- completely integrated into runner
- permanent release using string with manual reset
- prefitted for release from outside with metal cable
- two symmetrical door connections
- allows three automation mounting modes
- compact head unit (total height 8 cm) with runner integral in unit, allowing installation close to the spring shaft
- LED courtesy light
- side-opening hatch for access to electronics
- builder button (external step-by-step operating button)
- compact KEY 24 Vdc motor
- motor sizes: 800Nm and 1200Nm
- optional battery pack
- energy saving version: <0.5W in standby mode
- compatible with KEY electric lock for sectional doors
HEAD UNIT
CARRIAGE
11
3 INSTALLATION MODES
- with head in the center of the garage
- all wiring remains on the cross beam
- shorter installation times
- less weight projecting into centre ofgarage
- all wiring remains on the cross beam
- reinforces the spring shaft for addedrigidity
- shorter installation times
- less weight projecting into centre ofgarage
- available with belt drive system
- illuminates garage with two rows of LEDsup to 4 m long, total output 40W LED
- lighting-industry grade polycarbonateLED cover
- very low power consumption thanks toLED technology
- extruded aluminium rubberpowder-coated in RAL9010
- runner opening designed to minimisecarriage visibility
- minimal, elegant ceiling mounting fixture
- one-piece runner
- steel C-section available with belt drivesystem
- total length 3 or 4m
- one-piece or 3-piece runner for 3m lenght
- two-button programming, with KUBE PRO receiver or DYL cabled display
- maintenance and/or malfunction alerts via app (with KUBE)
- remote parameter editing (with KUBE installed)
- door opening via smartphone (with KUBE installed)
- safety device (photocell + sensitive edge) disabling dip-switches
- integrated radio receiver
- electronics covered for protection against accidental damage
LED RUNNER
CLASSIC
ON CROSS BEAM
ON SPRINGSHAFT
STANDARD RUNNER
ELECTRONICS
12
NIGHT LIGHT SYSTEM
A new approach to automation for doors and gates. No longer just a way to manage openings, but a light source during night hours.
Night Light System is a concept that combines the comfort of an automatic gate with the use of LED lighting to illuminate your entrance over night, independently of the gate opening.
The innovative Night Light System is based on the integration of LED units within the automation, to light up the motors while functioning.This provides a comfortable courtesy light during night hours, thanks to a twilight sensor placed into the flash light itself. Our motors become a stylish light source for your gate.
Night Light System representsItalian style and design, combining elegance and technology with the use of state of the art materials. The smooth and streamlined shapes enhance the beauty of your gate, giving a personal appearance to your home and private environment.
*Night Light System: example of automation for swing gates (Ray, Révo), with three courtesy lights at medium-high power, continuously lit for 12 hours a day, every day of the year, at a cost of energy equal to 0.21 Euros/kW (average price for residential use)
13
COMFORT
DESIGN
SAFETY
SAVING
PERFORMANCE
Represents the Italian style and design, combining elegance and technology with the use of last generation materials and LEDs lighting
Enhances the beauty of the gate design, thanks to the smooth and sinuous shapes, giving a more sophisticated aspect to your environment
Defines the width of the driveway passage during the night hours, simplifying the entrance and exit from the house
Ease the night vision when security cameras are installed, in order to monitor the perimeter of the houseand obtain a better control on your private property
The use of LEDs allows lower power consumption compared to the use of traditional incandescent bulbs providing a longer life cycle and a brighter vision
The cost of the Night Light System energy consumption referred to the lights at night is about 2 Euros per year*
Designed and manufactured in compliance with the requirements of the EU standards and Italian quality
Efficient and reliable, tested for wear resistance and long durability for both mechanical and electronic components
Simple to install, easy to use and, above all, safe for the whole family
14
* ALL PRICES ARE WITHOUT V.A.T.
MEANS PRODUCTS WITH LONGER DELIVERY TIME (WITHIN 6 WEEKS)
KEY AUTOMATION HOME & INDUSTRY CATALOGUE 2020
15
KEY HOME
KEY INDUSTRY
KEY ACCESSORIES
SYSTEMS FOR SWING GATES 70
SYSTEMS FOR SLIDING GATES 74
ROAD BARRIERS 82
SYSTEMS FOR ROLLING SHUTTERS 88
INDUSTRY AND COMMERCIAL SOLUTIONS
ACCESSORIES 95
CONTROL UNITS 114
ELECTRIC DIAGRAMS 126
ALPHABETICAL LIST 130
ACCESSORIES
SYSTEMS FOR SWING GATES 18
SYSTEMS FOR SLIDING GATES 44
SYSTEMS FOR SECTIONAL AND OVERHEAD DOORS 58
HOME SOLUTIONS
16
17
KEY HOME HOME SOLUTIONS
SYSTEMS FOR SWING GATES 18
RAY 20
RAY KIT 24
STAR 26
STAR KIT 28
RÉVO 30
RÉVO KIT 34
MEWA 36
MEWA KIT 38
UNDER 40
UNDER KIT 42
SYSTEMS FOR SLIDING GATES 44
SUN 46
SUN KIT 50
TURBO 54
TURBO KIT 56
SYSTEMS FOR SECTIONAL AND OVERHEAD DOORS 58
HALO 60
HALO KIT 62
BLINDO 64
BLINDO KIT 66
18
4
5
1 12 2
3 3
6
STANDARD INSTALLATION FOR SWING GATES
1 Post for photocells2 Gear motor3 Photocells4 Flashing light5 Key switch6 Radio transmitter
24 V, intensive use, up to 3 m
24 V, intensive use, up to 4 m, reversibile
230 V, normal use, up to 4 m
24 V, intensive use, up to 3 m
24 V, intensive use, up to 4 m
RAY2524RAY2524E
RAY2224RAY3024F
KRAY4024R
RAY40
STAR3024
RAY4024ERAY4224E
RAY GEAR MOTOR FOR LEAVES UP TO 4 m
SELECTION GUIDESYSTEMS FOR SWING GATES
230 V, normal use
24 V, intensive use, with control unit
230 V, normal use
230 V, normal use, cable 10 m
24 V, intensive use, only motor
24 V, intensive use
24 V, intensive use
UND
REP2024/REP2224
SN-50/KSN50B
UND10
REP2024S/REP2224S
SN-50-24/KSN5024B
UND24UND3024F
UNDER GEAR MOTOR FOR LEAVES UP TO 3,5 m
STARGEAR MOTOR FOR LEAVES UP TO 3 m
RÉVOGEAR MOTOR WITH ARTICULATED ARMS FORLEAVES UP TO 2,3 m
MEWAGEAR MOTOR WITH ARTICULATED ARMS FOR LEAVES UP TO 4 m
19
20
NIGHTLIGHTSYSTEM
NEW
High technological materials resistant to weather conditions
User friendly. Manual unlock possible with Sub transmitter
Built in LED light in the front of the motor body, to light up gate entrance and define width of the passage at night
UV-resistant plastic covers
Aligned front and rear mounting brackets for ease of motor installation
Extremely silent mechanics, protected by robust die-cast and powder-coated aluminum body
Possibility to unlock motor withtransmitter
Metal gearing (RAY4024E, RAY4024R, RAY3024F)
Built-in LED light mask Robust bronze lock nut on endless screw
CODE DESCRIPTION PCS PALLET PRICE
RAY2524 For swing gates with maximum length 3 m or max weight 500 kg per leaf,24 Vdc motor 25 € 390,00
RAY2524E For swing gates with maximum length 3 m or max weight 500 kg per leaf,24 Vdc motor, with encoder 25 € 405,00
RAY4024E For swing gates with maximum length 4 m or max weight 600 kg per leaf,24 Vdc motor, with encoder 25 € 513,00
KRAY4024R For swing gates with maximum length 4 m or max weight 500 kg per leaf,24 Vdc motor, reversible, included of power module PO24R, with encoder 25 € 640,00
RAY3024F For swing gates with maximum length 3 m or max weight 300 kg per leaf,24 Vdc motor, with encoder 25 € 528,00
MODELS
PLUS
RAY FAST: opening speed at 90° in 10 seconds ** slow down phase excluded
ELECTROMECHANICAL GEAR MOTOR FOR SWING GATES WITH LEAVES UP TO 4 m, 24 Vdc
RAY
21
104
100
844
(415)
500
400
300
200
600
RAY4024E
RAY3024F
RAY2524/E
RAY4024R100
2 3 42,5 3,5
Gate shape and height and weather conditions can considerably reduce the values shown above, in the graph. 230 Vac motors are suggested for windy areas.The RAY4024 model is recommended for condominium installations.
LIMIT USE
ADFBPair of adjustable front
mounting brackets
ADRBPair of adjustable rear
mounting brackets
ADWAAdapter kit for
competitors motors
FCRAYMechanical stop
in closing
ELS-CHorizontal 12 V
electrolock
KBPBattery back-up kit
KITFIXBATTFixing brackets for
batteries
PC 1 € 35,00 PC 1 € 40,00 PC 1 € 10,00 PC 1 € 11,00 PC 1 € 150,00 PC 1 € 118,00 PC 1 € 14,00
KCUnlock key cylinder
EXRBExtention bracket for
outside opening
520STAF032A00Adapting rear bracket
999KRAYDColour change kit
RAL 7016
550CABL045A00 *Special cable for Eclipse
RG174 50 Ohm + 4 × 0,50 mm² (100m)
14AB2Control unit in box for two
24 Vdc motors
14AB2FControl unit in box for two
24 Vdc motors(only RAY3024F)
PC 1 € 20,00 PC 1 € 20,00 PC 1 € 25,00 PC 1 € 20,00 PC 1 € 350,00 PC 1 € 405,00 PC 1 € 426,00
EGS1Key selector with
all-metal body
DYLDisplay module
Cable length 120 cm (only 14A)
KUBEPROWireless module for
programming (only 14A)
TSWarning board
PC 1 € 60,00 PC 1 € 60,00 PC 1 € 90,00 PC 1 € 3,00
ACCESSORIES
DIMENSIONS
* we recommend not to exceed 4 mt
connection length to avoid significant radio
range losses
RAY2524 RAY2524E RAY4024E KRAY4024R RAY3024FMECHANICAL DATAspeed cm/s 2,6 2,6 1,5 3 3,8pulling force N 1500 1500 2000 1000 1000working cycle % 80 80 80 80 50opening time at 90° sec 18-25* 18-25* 20-25* 20-25* 10-15*ELECTRICAL DATAcontrol board 14AB 14AB 14AB2 14AB2 14AB2Fpower Vdc 24 24 24 24 24consumption A 3,5 3,5 5 5 5absorbed power W 85 85 120 120 120integrated lights yes yes yes yes yesGENERIC DATAprotection degree IP 44 44 44 44 44 dimensions (L - D - H) mm 844 - 100 - 104 844 - 100 - 104 844 - 100 - 104 844 - 100 - 104 844 - 100 - 104weight kg cad 6 6 8 8 8working temperature °C -20 + 55 -20 + 55 -20 + 55 -20 + 55 -20 + 55leaf maximum weight Kg 500 500 600 500 300
* with optimized fixing dimensions
Max
leaf
wei
ght
(kg)
Max leaf length (m)
22
NEW
MODELS
PLUS
CODE DESCRIPTION PCS PALLET PRICE
RAY40 For swing gates with maximum length 4 m or max weight 600 kg per leaf,230 Vac motor 25 € 436,00
RAY2224 For swing gates with maximum length 3 m or max weight 500 kg per leaf,24 Vdc motor 25 € 369,00
RAY4224E For swing gates with maximum length 4 m or max weight 600 kg per leaf,230 Vac motor with encoder 25 € 485,00
High technological materials resistant to weather conditions
Manual unlock possible with Sub transmitter. User friendly
UV-resistant plastic covers
Extremely silent mechanics, protected by robust die-cast and powder-coated aluminum body
Aligned front and rear mounting brackets for ease of motor installation
Possibility to unlock motor withtransmitter
Metal gearing(RAY40, RAY4224E)
Stylish design screwless at sight Brackets in line
ELECTROMECHANICAL GEAR MOTOR FOR SWING GATES WITH LEAVES UP TO 4 m, 24 Vdc AND 230 Vac
RAY
23
104
100
844
(415)
500
400
300
200
600
100
2 3 42,5 3,5
RAY40/ RAY4224ERAY2224
Gate shape and height and weather conditions can considerably reduce the values shown above, in the graph. 230 Vac motors are suggested for windy areas.The RAY4224E model is recommended for condominium installations.
LIMIT USE DIMENSIONS
RAY40 RAY2224 RAY4224EMECHANICAL DATAspeed cm/s 1,6 2,6 1,5pulling force N 2000 1500 2000working cycle % 40 80 80opening time at 90° sec 20-25* 18-25* 20-25*ELECTRICAL DATAcontrol board CT202 CT20224 CT20224E
powerVac 230 - -Vdc - 24 24
consumption A 1,2 3,5 5absorbed power W 280 85 120capacitor µF 8 - -thermoprotection °C 150 - -GENERIC DATAprotection degree IP 44 44 44 dimensions (L - D - H) mm 844 - 100 - 104 844 - 100 - 104 844 - 100 - 104weight kg cad 8 6 8working temperature °C -20 + 55 -20 + 55 -20 + 55leaves maximum weight Kg 600 500 600
* with optimized fixing dimensions
ADFBPair of adjustable front
mounting brackets
ADRBPair of adjustable rear
mounting brackets
ADWAAdapter kit for
competitors motors
FCRAYMechanical stop
in closing
ELS-CHorizontal 12 V
electrolock
KBPBattery back-up kit
(for 24V)
KITFIXBATTFixing brackets for
batteries
PC 1 € 35,00 PC 1 € 40,00 PC 1 € 10,00 PC 1 € 11,00 PC 1 € 150,00 PC 1 € 118,00 PC 1 € 14,00
KCUnlock key cylinder
EXRBExtention bracket for
outside opening
520STAF032A00Adapting rear bracket
CT20224Control unit in box for two
24 Vdc motors (only RAY2224)
CT20224EControl unit in box for two
24 Vdc motors withencoder (only RAY4224E)
CT202Control unit in box for two
230 Vac motors(only RAY40)
EGS1Key selector with
all-metal body
PC 1 € 20,00 PC 1 € 20,00 PC 1 € 25,00 PC 1 € 344,00 PC 1 € 369,00 PC 1 € 328,00 PC 1 € 60,00
TSWarning board
PC 1 € 3,00
ACCESSORIES
Max
leaf
wei
ght
(kg)
Max leaf length (m)
24
DYL display or KUBE PRO wireless module are mandatory to program 14A control unit
Easy slowdown and open limit settings
Mechanical parts well protected from external agents
Opening mechanical stop included for proper gate installation and use
Water resistant SUB remote control included
Night Light System with LED light included (NLS version)
14A control unit (NLS version)
CT202 24 control unit (version without NLS)
CT202 control unit (version without NLS)
PLUS
FOR SWING GATES WITH LEAVES UP TO 4 m, 24 Vdc AND 230 VacRAY KIT
All kits that include the 14A control unit offer the possibility of adding up to 20 additional LED lights, to illuminate the entrance of the house during the night automatically and economically
25
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
KRAY42ES Kit for swing gates with leaves up to 4 m, 230 Vac motor, control unit with slowdown and opening mechanic stop 22kg 15 € 1.306,00
KRAY42KS Kit for swing gates with leaves up to 4 m, 230 Vac motor, control unit with slowdown and opening mechanic stop 21,8kg 15 € 1.266,00
KRAY2224ES Kit for swing gates with leaves up to 3 m, 24 Vdc motor, control unit with slowdown and opening mechanic stop 18,6kg 15 € 1.219,00
KRAY2224KS Kit for swing gates with leaves up to 3 m, 24 Vdc motor, control unit with slowdown and opening mechanic stop 18,4kg 15 € 1.179,00
KRAY4224ES Kit for swing gates with leaves up to 4 m, 24 Vdc motor, control unit with slowdown and opening mechanic stop 18,4kg 15 € 1.460,00
KRAY4224KS Kit for swing gates with leaves up to 4 m, 24 Vdc motor, control unit with slowdown and opening mechanic stop 18,4kg 15 € 1.420,00
MODELS · WITHOUT NIGHT LIGHT SYSTEM
RAY CT202 CT20224 LUMY RX4Y FT33 SUB-44WR SUB-44R
KRAY42ES • 2 PCS • • • • • 2 PCS
KRAY42KS • 2 PCS • • • • 2 PCS
KRAY2224ES • 2 PCS • • INTEGRATED • • 2 PCS
KRAY2224KS • 2 PCS • INTEGRATED • • 2 PCS
KRAY4224ES • 2 PCS • • INTEGRATED • • 2 PCS
KRAY4224KS • 2 PCS • INTEGRATED • • 2 PCS
KIT COMPONENTS
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
KRAY2524EK Kit for swing gates with leaves up to 3 m, 24 Vdc motor, control unit with slowdown and opening mechanic stop. With night light function included 18,6kg 15 € 1.357,00
KRAY2524KK Kit for swing gates with leaves up to 3 m, 24 Vdc motor, control unit with slowdown and opening mechanic stop 18,4kg 15 € 1.297,00
KRAY4024EK Kit for swing gates with leaves up to 4 m, 24 Vdc motor, control unit with slowdown, opening mechanic stop and encoder. With night light function included 18,6kg 15 € 1.593,00
KRAY4024KK Kit for swing gates with leaves up to 4 m, 24 Vdc motor, control unit with slowdown, opening mechanic stop and encoder 18,4kg 15 € 1.533,00
KRAY3024FEKKit for swing gates with leaves up to 3 m, 24 Vdc motor, control unit with slowdown and opening mechanic stop and encoder. With night light function included
18,6kg 15 € 1.644,00
KRAY3024FKK Kit for swing gates with leaves up to 3 m, 24 Vdc motor, control unit with slowdown and opening mechanic stop and encoder 18,4kg 15 € 1.584,00
MODELS · WITH NIGHT LIGHT SYSTEM
KIT COMPONENTS
RAY 14A ECLIPSE RX4Y FT33 SUB-44WR SUB-44R KUBE
KRAY2524EK • 2 PCS • 14AB • • • • •
KRAY2524KK • 2 PCS • 14AB • • • •
KRAY4024EK • 2 PCS • 14AB2 • • • • •
KRAY4024KK • 2 PCS • 14AB2 • • • •
KRAY3024FEK • 2 PCS • 14AB2F • • • • •
KRAY3024FKK • 2 PCS • 14AB2F • • • •
26
New version without encoder
Easy slowdown and open limit settings
Mechanical parts well protected from external debris
Compatible with control unit CT202 24
Available on kit version
New motor up to 3 m
MODELS
PLUS
CODE DESCRIPTION PCS PALLET PRICE
STAR3024 For swing gates with maximum length 3 m per leaf, pair of irreversible 24 Vdc motors, without encoder (2 pcs, left and right) 21 € 605,00
Robust gears and mechanical parts Metallic release systemSturdy telescopic stem New version without encoder
ELECTROMECHANICAL GEAR MOTOR FOR SWING GATES WITH LEAVES UP TO 3 m, 24 Vdc
STAR
27
177
115
685
7410 1 2 3
400
200
100
300
STAR3024MECHANICAL DATAspeed cm/s 2,5pulling force N 1400working cycle % 80opening time at 90° sec 18-25ELECTRICAL DATAcontrol board CT20224power Vdc 24consumption A 3,5absorbed power W 85GENERIC DATAprotection degree IP 54 dimensions (L - D - H) mm 741 - 115 - 177weight kg cad 3,2working temperature °C -20 + 55leaves maximum weight Kg 400
LIMIT USE DIMENSIONS
Gate shape and height and weather conditions can considerably reduce the values shown above, in the graph.
ELS-CHorizontal 12 V
electrolock
KBPBattery back-up kit
KITFIXBATTFixing brackets for
batteries
CT20224Control unit in box for two
24 Vdc motors
EGS1Key selector with
all-metal body
TSWarning board
PC 1 € 150,00 PC 1 € 118,00 PC 1 € 14,00 PC 1 € 344,00 PC 1 € 60,00 PC 1 € 3,00
ACCESSORIES
Max
leaf
wei
ght
(kg)
Max leaf length (m)
28
KIT COMPONENTS
Easy slowdown and open limit settings
Mechanical parts well protected from external debris
PLUS
STAR CT20224 LUMY FT33 SUB-44WR SUB-44R
KSTAR3224ES • 2 PCS • • • • 2 PCS
KSTAR3224KS • 2 PCS • • • 2 PCS
MODELS
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
KSTAR3224ES Kit for swing gates with leaves up to 3 m, 24 Vdc motor, control unitwith slowdown 19kg 21 € 993,00
KSTAR3224KS Kit for swing gates with leaves up to 3 m, 24 Vdc motor, control unitwith slowdown 18,8kg 21 € 953,00
FOR SWING GATES WITH LEAVES UP TO 3 m, 24 VdcSTAR KIT
29
30
NIGHTLIGHTSYSTEM
MODELS
Even more compact size. Installation height just 5 cm from ground level.
The product combines a lighting system with an articulated arm gear motor. Designed for swing gates made of aluminum, PVC or wood leaves
Simplified adjustment of the on-board mechanical stops
The articulated arm allows the installation of RÉVO in all those difficult situations where there is a significant depth between the leaf and the column, or with very narrow columns (10x10 cm).
Available in two versions, with articulated arm or sliding arm for reduced openings
Ideal for narrow columns or pillars with reduced dimensions. Compact shape and silent movement, made of strong die-cast aluminum and UV resistant covers
The unlocking system is simple and intuitive, also possible using the transmitter Sub.
Optional unlock from the outside
PLUS
CODE DESCRIPTION PCS PALLET PRICE
REP2024 For swing gates with maximum length 2,3 m or weight 250 kg per leaf, 24 Vdc motor 16 € 738,00
REP2024S For swing gates with maximum length 2,3 m or weight 250 kg per leaf, 24 Vdc motor.Without control unit 16 € 455,00
Easy cable passage Simplified limit switch adjustmentInstallation up to 5 cmfrom the ground
Compact dimensions (width 12 cm)
ELECTROMECHANICAL GEAR MOTOR WITH ARTICULATED ARM FOR SWING GATES WITH LEAVES UP TO 2,3 m, 24 Vdc
RÉVO
31
250
200
150
100
1,7 1,8 1,9 2 2,1 2,2 2,3
D
C
A
REP2024 REP2024S
MECHANICAL DATAtorque Nm 120 120working cycle % 80 80opening time at 90° sec 14-20 14-20ELECTRICAL DATAcontrol board 14A -
powerVac 230 -Vdc - 24
consumption A 0,6 2absorbed power W 115 50integrated lights yes yesGENERIC DATAprotection degree IP 44 44dimensions (L - D - H) mm 125 x 255 x 310 125 x 255 x 310weight kg cad 10 7,5working temperature °C -20 + 55 -20 + 55leaves maximum weight Kg 250 250
LIMIT USE DIMENSIONS
Gate shape and height and weather conditions can considerably reduce the values shown above, in the graph.
ELS-CHorizontal 12 V
electrolock
KBPNNiMH battery back-up kit
KCUnlock key cylinder
REV1Slide arm
REV2 Arm for reduced
openings
REV3External release unlock kit
BMETMetal box with release
system
PC 1 € 150,00 PC 1 € 150,00 PC 1 € 20,00 PC 1 € 154,00 PC 1 € 154,00 PC 1 € 57,00 PC 1 € 100,00
999KREVODColour change kit
RAL 7016
550CABL045A00 *Special cable for Eclipse
RG174 50 Ohm + 4 × 0,50 mm² (100m)
EGS1Key selector with
all-metal body
DYLDisplay module
Cable length 120 cm (only 14A)
KUBEPROWireless module for
programming (only 14A)
KUBEModule for
automation control from smartphone
TSWarning board
PC 1 € 35,00 PC 1 € 350,00 PC 1 € 60,00 PC 1 € 60,00 PC 1 € 90,00 PC 1 € 70,00 PC 1 € 3,00
ACCESSORIES
* we recommend not to exceed 4 mt
connection length to avoid significant radio
range losses
100
200
450
A min
C max
D min
Max
leaf
wei
ght
(kg)
Max leaf length (m)
32
MODELS
Even more compact size. Installation height just 5 cm from ground level.
Articulated arm gear motor. Designed for swing gates made of aluminum, PVC or wood leaves
Simplified adjustment of the on-board mechanical stops
The unlocking system is simple and intuitive, also possible using the transmitter Sub.
Optional unlock from the outside
The articulated arm allows the installation of RÉVO in all those difficult situations where there is a significant depth between the leaf and the column, or with very narrow columns (10x10 cm).
Available in two versions, with articulated arm or sliding arm for reduced openings
Ideal for narrow columns or pillars with reduced dimensions. Compact shape and silent movement, made of strong die-cast aluminum and UV resistant covers
Back-up battery (optional) on board
PLUS
CODE DESCRIPTION PCS PALLET PRICE
REP2224 For swing gates with maximum length 2,3 m or weight 250 kg per leaf, 24 Vdc motor 16 € 676,00
REP2224S For swing gates with maximum length 2,3 m or weight 250 kg per leaf, 24 Vdc motor.Without control unit 16 € 435,00
ELECTROMECHANICAL GEAR MOTOR WITH ARTICULATED ARM FOR SWING GATES WITH LEAVES UP TO 2,3 m, 24 Vdc
RÉVO
Easy cable passage Simplified limit switch adjustmentInstallation up to 5 cmfrom the ground
Compact dimensions (width 12 cm)
33
250
200
150
100
1,7 1,8 1,9 2 2,1 2,2 2,3
D
C
A
REP2224 REP2224S
MECHANICAL DATAtorque Nm 120 120working cycle % 80 80opening time at 90° sec 14-20 14-20ELECTRICAL DATAcontrol board CT20224 -
powerVac 230 -Vdc - 24
consumption A 0,65 2absorbed power W 115 50GENERIC DATAprotection degree IP 44 44dimensions (L - D - H) mm 125 x 255 x 310 125 x 255 x 310weight kg cad 10 7,5working temperature °C -20 + 55 -20 + 55leaves maximum weight Kg 250 250
LIMIT USE DIMENSIONS
ELS-CHorizontal 12 V
electrolock
KBPNNiMH batteryback-up kit
KCUnlock key cylinder
REV1Slide arm
REV2 Arm for reduced
openings
REV3External release unlock kit
BMETMetal box with release
system
PC 1 € 150,00 PC 1 € 150,00 PC 1 € 20,00 PC 1 € 154,00 PC 1 € 154,00 PC 1 € 57,00 PC 1 € 100,00
EGS1Key selector with
all-metal body
TSWarning board
PC 1 € 60,00 PC 1 € 3,00
ACCESSORIES
100
200
450
A min
C max
D min
Gate shape and height and weather conditions can considerably reduce the values shown above, in the graph.
Max
leaf
wei
ght
(kg)
Max leaf length (m)
34
DYL display or KUBE PRO wireless module are mandatory to program 14A control unit
Easy slowdown and open limit settings
Mechanical parts well protected from external debris
Mechanical stops included for proper gate installation and use
Water resistant SUB remote control included
Night Light System with LED light included (NLS version)
14A control unit (NLS version)
CT20224 control unit (version without NLS)
PLUS
FOR SWING GATES WITH LEAVES UP TO 2,3 m, 24 VdcRÉVO KIT
All kits that include the 14A control unit offer the possibility of adding up to 20 additional LED lights, to illuminate the entrance of the house during the night automatically and economically
35
14A
CT20224
MODELS · WITH NIGHT LIGHT SYSTEM
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
KREP2024EKKit for swing gates with leaves up to 2,3 m, 24 Vdc motor with articulated arms, control unit with slowdown, mechanical stop in opening and closing. With night light function included (with control unit 14A)
17,6kg 16 € 1.395,00
KREP2024KKKit for swing gates with leaves up to 2,3 m, 24 Vdc motor with articulated arms, control unit with slowdown, mechanical stop in opening and closing(with control unit 14A)
17,4kg 16 € 1.334,00
MODELS · WITHOUT NIGHT LIGHT SYSTEM
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
KREP2224ESKit for swing gates with leaves up to 2,3 m, 24 Vdc motor with articulated arms, control unit with slowdown, mechanical stop in opening and closing(with control unit CT20224)
17,6kg 16 € 1.255,00
KREP2224KSKit for swing gates with leaves up to 2,3 m, 24 Vdc motor with articulated arms, control unit with slowdown, mechanical stop in opening and closing(with control unit CT20224)
17,4kg 16 € 1.213,00
KIT COMPONENTS
RÉVO ECLIPSE RX4Y FT33 SUB-44WR SUB-44R KUBE
KREP2024EK • 2 PCS • • • • •
KREP2024KK • 2 PCS • • • •
KIT COMPONENTS
RÉVO RX4Y LUMY FT33 SUB-44WR SUB-44R
KREP2224ES • 2 PCS INTEGRATED • • • 2 PCS
KREP2224KS • 2 PCS INTEGRATED • • 2 PCS
36
NIGHTLIGHTSYSTEM
MODELS
Motor with encoder (24 Vdc version) and possibility of speed and slowdown regulation
Maximum safety in the obstacle detection
Optional external release for an easy manual unlock from outside
With soft start and soft stop, granting mechanical parts integrity
Compatible with 24Vdc control unit 14AB2
Compatible with 230Vac control unit CT202
CODE DESCRIPTION PCS PALLET PRICE
SN-50 For swing gates with maximum length 4 m per leaf, 230 Vac motor with opening and closing electric limit switches. Specify right or left motor (installation inside view) 36 € 531,00
KSN50B Pair of motor for swing gates with maximum length 4 m per leaf, 230 Vac motor with opening and closing electric limit switches (2 pcs) 18 € 1.062,00
SN-50-24 For swing gates with maximum length 3 m per leaf, 24 Vdc motor with encoder. Specify right or left motor (installation inside view) 36 € 573,00
KSN5024B Pair of motor for swing gates with maximum length 3 m per leaf, 24 Vdc motor with encoder (2 pcs) 18 € 1.145.00
PLUS
Reinforced and sturdy arm suitablefor wide-angles opening
Limit switch with high precision regulation
External release for an easy manual unlock from outside
Powerful motor with solid metal gearbox
ELECTROMECHANICAL GEAR MOTOR WITH ARTICULATED ARM FOR SWING GATES WITH LEAVES UP TO 4 m, 24 Vdc AND 230 Vac
MEWA
37
2 2,5 3 4
800
400
600
200
0
SN50
SN50-24
D
C
A
150
80
340
170
SN-50 SN-50-24
MECHANICAL DATAtorque Nm 400 350working cycle % 30 80opening time at 90° sec 18 15-25ELECTRICAL DATAcontrol board CT202 14AB2
powerVac 230 -Vdc - 24
consumption A 1,5 5absorbed power W 340 120capacitor µF 12 -thermoprotection °C 150 -GENERIC DATAprotection degree IP 43 43dimensions (L - D - H) mm 330 - 187 - 157 330 - 187 - 157weight kg cad 14 13,8working temperature °C -20 + 55 -20 + 55leaves maximum weight Kg 800 400
LIMIT USE DIMENSIONS
Gate shape and height and weather conditions can considerably reduce the values shown above, in the graph. 230 Vacmotors are suggested for windy areas.
ELS-CHorizontal 12 V
electrolock
KBPBattery back-up kit
KITFIXBATTFixing brackets for
batteries
BMETMetal box with release
system
550CABL045A00 *Special cable for Eclipse
RG174 50 Ohm + 4 × 0,50 mm² (100m)
SBLEXTCable external release kit
KFEKit electric limit switches
for 24Vdc version
PC 1 € 150,00 PC 1 € 118,00 PC 1 € 14,00 PC 1 € 100,00 PC 1 € 350,00 PC 1 € 29,00 PC 1 € 20,00
14AB2Control unit in box for two
24 Vdc motors
CT202Control unit in box for two
230 Vac motors
EGS1Key selector with
all-metal body
TSWarning board
PC 1 € 405,00 PC 1 € 328,00 PC 1 € 60,00 PC 1 € 3,00
ACCESSORIES
150
300
500
A min
C max
D min
* we recommend not to exceed 4 mt
connection length to avoid significant radio
range losses
Max
leaf
wei
ght
(kg)
Max leaf length (m)
38
Easy slowdown and open limit settings
Mechanical parts well protected from external debris
Water resistant SUB remote control included
PLUS
MODELS
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
KSN52ES Kit for swing gates with leaves up to 4 m, 230 Vac motor with articulated arms, control unit with slowdown 32,2 kg 12 € 1.519,00
KSN52KS Kit for swing gates with leaves up to 4 m, 230 Vac motor with articulated arms, control unit with slowdown 32,5 kg 12 € 1.478,00
KIT COMPONENTS
MEWA CT202 LUMY RX4Y FT33 SUB-44WR SUB-44R
KSN52ES • 2 PCS • • • • • 2 PCS
KSN52KS • 2 PCS • • • • 2 PCS
FOR SWING GATES WITH LEAVES UP TO 4 m, 230 VacMEWA KIT
39
40
NIGHTLIGHTSYSTEM
NEW
New foundation box CF3
New unlock lever with key and integrated pull lever
Opening and closing mechanical stops included
Compatible with 230Vac control unit CT202
New shell compatible with other producers’ foundation boxes
24 Vdc motor without encoder
Possibility to choose between 1.5 m and 10 m cable motor (for 230 Vac)
Adjustable speed and slowdown functions
UNDER FAST ideal for pedestrian gates: 90° opening rate in 10 seconds*
* slow down phase excluded
MODELS
PLUS
CODE DESCRIPTION PCS PALLET PRICE
UND For swing gates with maximum length 3,5 m, 230 Vac motor, with opening and closing mechanical stops. Cable length 1.5 m 36 € 441,00
UND10 For swing gates with maximum length 3,5 m, 230 Vac motor, with opening and closing mechanical stops. Cable length 10 m 36 € 446,00
UND24 For swing gates with maximum length 3,5 m, 24 Vdc motor, without encoder, with opening and closing mechanical stops 36 € 503,00
UND24F For pedestrian entrances with swing gates with a maximum length of 3 m, 24 Vdc motor, with encoder and with opening and closing limit switches 36 € 518,00
Bronze and tempered steel internal gears for maximum reliability
Easy maintenance thanks to the double greasers both on housing
and gear motor
High precision mechanical stops Internal and external unlock with special metal key
UNDERGROUND ELECTROMECHANICAL GEAR MOTOR FOR SWING GATES WITH LEAVES UP TO 3,5 m, 24 Vdc AND 230 Vac
UNDER
41
500
400
300
200
600
1,5 2,5 3,52 3
UNDUND10UND24
403
327,
25
60
164 45
67
Gate shape and height and weather conditions can considerably reduce the values shown above, in the graph. 230 Vacmotors are suggested for windy areas.
LIMIT USE DIMENSIONS
UND UND10 UND24 UND24FMECHANICAL DATAtorque Nm 300 300 250 130working cycle % 30 30 80 50opening time at 90° sec 20 20 18-25 10-15ELECTRICAL DATAcontrol board CT202 CT202 14AB2 14AB2F
powerVac 230 230 - -Vdc - - 24 24
consumption A 1 1 5 5absorbed power W 230 230 120 120capacitor µF 10 10 - -thermoprotection °C 150 150 - -GENERIC DATAprotection degree IP 67 67 67 67dimensions (L - D - H) mm 412 - 160 - 346 412 - 160 - 346 412 - 160 - 346 412 - 160 - 346weight kg cad 11 11 10,8 10,8working temperature °C -20 + 55 -20 + 55 -20 + 55 -20 + 55leaves maximum weight Kg 600 600 600 300
ELS-CHorizontal 12 V
electrolock
KBPBattery back-up kit
KITFIXBATTFixing brackets for
batteries
CF3 *Cataphoresis
housing box withunlock lever SB3
CI3 *Stainless steel
housing box, withunlock lever SB3
CF3SB *Cataphoresis housing
box, without connecting levers
ADUNFixing kit for otherproducers’ boxes
PC 1 € 150,00 PC 1 € 118,00 PC 1 € 14,00 PC 1 € 257,00 PC 1 € 380,00 PC 1 € 98,00 PC 1 € 15,00
SB3Unlock lever with
key
OP100Kit for over 100°
opening. Leaf length max 3000 mm
14AB2Control unit in box
for two 24 Vdcmotors
14AB2FControl unit in box
for two 24 Vdc motors (only UND24F)
CT20224Control unit in box for two
24 Vdc motors(only UND24)
CT202Control unit in box
for two 230 Vacmotors
EGS1Key selector with
all-metal body
PC 1 € 170,00 PC 1 € 165,00 PC 1 € 405,00 PC 1 € 426,00 PC 1 € 344,00 PC 1 € 328,00 PC 1 € 60,00
550CABL045A00 *Special cable for Eclipse
RG174 50 Ohm + 4 × 0,50 mm² (100m)
DYLDisplay module
Cable length 120 cm (only 14A)
KUBEPROWireless module for
programming (only 14A)
TSWarning board
PC 1 € 350,00 PC 1 € 60,00 PC 1 € 90,00 PC 1 € 3,00
ACCESSORIES
Max
leaf
wei
ght
(kg)
Max leaf length (m)
* 36 pcs pallet
42
DYL display or KUBE PRO wireless module are mandatory to program 14A control unit
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
KUND3024EK Underground kit for swing gates with leaves up to 3,5 m, 24 Vdc motor, control unit with slowdown. With Night Light System included 18,6 kg 9 € 1.583,00
KUND3024KK Underground kit for swing gates with leaves up to 3,5 m, 24 Vdc motor, control unit with slowdown 18,4 kg 9 € 1.523,00
KUND2ES Underground kit for swing gates with leaves up to 3,5 m, 230 Vac motor, control unit with slowdown 22 kg 9 € 1.316,00
KUND2KS Underground kit for swing gates with leaves up to 3,5 m, 230 Vac motor, control unit with slowdown 21,8 kg 9 € 1.276,00
Without encoder (24 Vdc version)
Adjustable speed and slowdown functions
Mechanical parts well protected from external debris
Water resistant SUB remote control included
PLUS
KIT COMPONENTS
MODELS
FOR SWING GATES WITH LEAVES UP TO 3,5 m, 24 Vdc AND 230 VacUNDER KIT
UNDER 14A ECLIPSE RX4Y FT33 SUB-44WR SUB-44R KUBE
KUND3024EK • 2 PCS • 14AB2 • • • • •
KUND3024KK • 2 PCS • 14AB2 • • • •
UNDER CT202 LUMY RX4Y FT33 SUB-44WR SUB-44R
KUND2ES • 2 PCS • • • • • 2 PCS
KUND2KS • 2 PCS • • • • 2 PCS
All kits that include the 14A control unit offer the possibility of adding up to 20 additional LED lights, to illuminate the entrance of the house during the night automatically and economically
43
44
4
5
1 12
3 3
6
24 V, intensive use, up to 400 Kg
24 V, intensive use, up to 700 Kg
24 V, intensive use, up to 1100 Kg
24 V, intensive use, up to 500 Kg
SUN4024/SUN4224
SUN7024/SUN7224
SUN11024
SUN5024F
SELECTION GUIDESYSTEMS FOR SLIDING GATES
24 V, normal use, up to 400 Kg
230 V, normal use, up to 500 Kg
230 V, normal use, up to 800 Kg
24 V, normal use, up to 700 Kg
SC4224
SC52
SC82
TU7224
TURBOGEAR MOTOR FOR GATES UP TO 800 Kg
SUN GEAR MOTOR FOR GATES UP TO 1100 Kg
STANDARD INSTALLATION FOR SLIDING GATES
1 Post for photocells2 Gear motor3 Photocells4 Flashing light5 Key switch6 Radio transmitter
45
46
NIGHTLIGHTSYSTEM
Built-in LED light
High technological materials resistant to weather conditions
Gear reduction with extra-large bearing with high performance
Extremely silent mechanics, protected by robust die-cast and powder-coated aluminum body
With 24 Vdc control unit 14A
The release system is ergonomic, efficient and easily accessible
Magnetic limit switch version upon request
Back-up battery (optional) on board
UV-resistant plastic covers
SUN FAST: Opening speed up to 40 cm/sec
PLUS
Built-in LED light Stylish design screwless at sightControl board 14A Robust gear reduction withself-standing bearing
MODELS
CODE DESCRIPTION PCS PALLET PRICE
SUN4024 For sliding gates up to 400 Kg, 24 Vdc motor, control unit with slowdown and electric limit switch, with 14A control board 36 € 651,00
SUN7024 For sliding gates up to 700 Kg, 24 Vdc motor, control unit with slowdown and electric limit switch, with 14A control board 36 € 723,00
SUN11024 For sliding gates up to 1100 Kg, 24 Vdc motor, control unit with slowdown and electric limit switch, with 14A control board 36 € 856,00
SUN5024F For sliding gates up to 500 Kg, 24 Vdc motor, control unit with slowdown and magnetic limit switch, with 14A control board 36 € 785,00
ELECTROMECHANICAL GEAR MOTOR FOR SLIDING GATES UP TO 1100 Kg, 24 VdcSUN
47
90
330 210
330
RN800 *M4 nylon rack L=1000
mm for gates up to 800 kg
CREM-8 **M4 zinc coated rack
30x8 mm L=1000 mm
CREM-12 **M4 zinc coated rack
30x12 mm L=1000 mm
KBPBattery back-up kit
999KSUNDColour change kit
RAL 7016
KCSUnlock kit with key
550CABL045A00 ***Special cable for Eclipse
RG174 50 Ohm + 4 × 0,50 mm² (100m)
€/m 25,00 €/m 26,00 €/m 27,00 PC 1 € 118,00 PC 1 € 40,00 PC 1 € 40,00 PC 1 € 350,00
EGS1Key selector with
all-metal body
DYLDisplay module
Cable length 120 cm (only 14A)
KUBEPROWireless module for
programming (only 14A)
KUBEModule for
automation control from smartphone
TWINInterface for
master/slave function (SUN7024 and SUN11024)
TSWarning board
PC 1 € 60,00 PC 1 € 60,00 PC 1 € 90,00 PC 1 € 70,00 PC 1 € 50,00 PC 1 € 3,00
DIMENSIONS
SUN4024 SUN7024 SUN11024 SUN5024FMECHANICAL DATAspeed cm/s 26* 25* 20* 40*torque Nm 18 26 38 23working cycle % 80 80 80 80ELECTRICAL DATAcontrol board 14A 14A 14A 14AFpower Vac 230 230 230 230consumption A 1,2 1,5 1,8 1,3absorbed power W 250 345 360 300capacitor µF - - - -thermoprotection °C - - - -integrated lights yes yes yes yesGENERIC DATAprotection degree IP 44 44 44 44dimensions (L - D - H) mm 330 - 210 - 300 330 - 210 - 300 330 - 210 - 300 330 - 210 - 300weight kg 12 12,5 13 13working temperature °C -20 + 55 -20 + 55 -20 + 55 -20 + 55gate maximum weight Kg 400 700 1100 500
* variable according to the gate weightModels of 700 kg and upward are recommended for condominium installations
* pack of 10 pcs** pack of 4 pcs
*** we recommend not to exceed 4 mt connection length to avoid significant radio range losses
ACCESSORIES
48
Integrated receiver
High technological materials resistant to weather conditions
Gear reduction with extra-large bearing with high performance
Extremely silent mechanics, protected by robust die-cast and powder-coated aluminum body
With 24 Vdc control unit CT10224
The release system is ergonomic, efficient and easily accessible
Magnetic limit switch version upon request
Back-up battery (optional) on board
UV-resistant plastic covers
Robust gear reduction withself-standing bearing
Manual unlock with trasmitter CT10224 control board with integrated receiver
MODELS
PLUS
CODE DESCRIPTION PCS PALLET PRICE
SUN4224 For sliding gates up to 400 Kg, 24 Vdc motor, control unit with slowdown and electric limit switch, with CT102 24 control board. Integrated receiver 36 € 636,00
SUN7224 For sliding gates up to 700 Kg, 24 Vdc motor, control unit with slowdown and electric limit switch, with CT102 24 control board. Integrated receiver 36 € 708,00
ELECTROMECHANICAL GEAR MOTOR FOR SLIDING GATES UP TO 700 Kg, 24 VdcSUN
49
90
330 210
330
RN800 *M4 nylon rack L=1000
mm for gates up to 800 kg
CREM-8 **M4 zinc coated rack
30x8 mm L=1000 mm
CREM-12 **M4 zinc coated rack
30x12 mm L=1000 mm
KBPBattery back-up kit
KCSUnlock kit with key
EGS1Key selector with
all-metal body
TWINInterface for
master/slave function (SUN7224)
€/m 25,00 €/m 26,00 €/m 27,00 PC 1 € 118,00 PC 1 € 40,00 PC 1 € 60,00 PC 1 € 50,00
TSWarning board
PC 1 € 3,00
DIMENSIONS
* pack of 10 pcs** pack of 4 pcs
SUN4224 SUN7224MECHANICAL DATAspeed cm/s 26* 25*torque Nm 18 26working cycle % 80 80ELECTRICAL DATAcontrol board CT10224 CT10224power Vac 230 230consumption A 1,2 1,5absorbed power W 250 345capacitor µF - -thermoprotection °C - -GENERIC DATAprotection degree IP 44 44dimensions (L - D - H) mm 330 - 210 - 300 330 - 210 - 300weight kg 12 12working temperature °C -20 + 55 -20 + 55gate maximum weight Kg 400 700
* variable according to the gate weightModels of 700 kg and upward are recommended for condominium installations
ACCESSORIES
50
DYL display or KUBE PRO wireless module are mandatory to program 14A control unit
With slowdown function both in opening and closing to preserve gate integrity
Conceived to carry intensive use (24 Vdc version)
Water resistant SUB remote control included
Night Light System with LED light included (NLS version)
14A control unit (NLS version)
PLUS
FOR SLIDING GATES UP TO 1100 Kg, 24 VdcSUN KIT
All kits that include the 14A control unit offer the possibility of adding up to 20 additional LED lights, to illuminate the entrance of the house during the night automatically and economically
51
14A
KIT COMPONENTS
SUN ECLIPSE RX4Y FT33 SUB-44WR SUB-44R KUBE
KSUN4024EK • 1 PC • • • • •
KSUN4024KK • 1 PC • • • •
KSUN5024FEK • 1 PC • • • • •
KSUN5024FKK • 1 PC • • • •
KSUN7024EK • 1 PC • • • • •
KSUN7024KK • 1 PC • • • •
KSUN11024EK • 1 PC • • • • •
KSUN11024KK • 1 PC • • • •
KSUN4024TW • 2 PCS
MODELS · WITH NIGHT LIGHT SYSTEM
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
KSUN4024EK Kit for sliding gates up to 400 kg, 24 Vdc motor, control unit with slowdown, electric limit switch. With night light function included (with control unit 14A) 13,1kg 36 € 845,00
KSUN4024KK Kit for sliding gates up to 400 kg, 24 Vdc motor, control unit with slowdown, electric limit switch (with control unit 14A) 12,9kg 36 € 785,00
KSUN5024FEKKit for sliding gates up to 500 kg, 24 Vdc motor, control unit with slowdown, magnetic limit switch. With night light function included (with control unit 14AF)
14kg 36 € 978,00
KSUN5024FKK Kit for sliding gates up to 500 kg, 24 Vdc motor, control unit with slowdown, magnetic limit switch (with control unit 14AF) 13,8kg 36 € 918,00
KSUN7024EK Kit for sliding gates up to 700 kg, 24 Vdc motor, control unit with slowdown, electric limit switch. With night light function included (with control unit 14A) 14kg 36 € 916,00
KSUN7024KK Kit for sliding gates up to 700 kg, 24 Vdc motor, control unit with slowdown, electric limit switch (with control unit 14A) 13,8kg 36 € 856,00
KSUN11024EK Kit for sliding gates up to 1100 kg, 24 Vdc motor, control unit with slowdown, electric limit switch. With night light function included (with control unit 14A) 14,5kg 36 € 1.050,00
KSUN11024KK Kit for sliding gates up to 1100 kg, 24 Vdc motor, control unit with slowdown, electric limit switch (with control unit 14A) 14,3kg 36 € 990,00
KSUN4024TW Pair of motors for opposed sliding gates up to 400 Kg, 24 Vdc, control unit with slow down function and electric limit switches (with control unit 14A) 23kg 32 € 1.364,00
ME
AN
S P
RO
DU
CTS
WIT
H L
ON
GE
R D
ELI
VE
RY
TIM
E (W
ITH
IN 6
WE
EK
S)
52
CT10224
MODELS · WITHOUT NIGHT LIGHT SYSTEM
With slowdown function both in opening and closing to preserve gate integrity
Conceived to carry intensive use (24 Vdc version)
KIT COMPONENTS
SUN RX4Y LUMY FT33 SUB-44WR SUB-44R
KSUN4224ES • 1 PC INTEGRATED • • • 2 PCS
KSUN4224KS • 1 PC INTEGRATED • • 2 PCS
KSUN7224ES • 1 PC INTEGRATED • • • 2 PCS
KSUN7224KS • 1 PC INTEGRATED • • 2 PCS
CT102 24 control unit (version without NLS)
PLUS
FOR SLIDING GATES UP TO 700 Kg, 24 Vdc
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
KSUN4224ES Kit for sliding gates up to 400 kg, 24 Vdc motor, control unit with slowdown, electric limit switch (with control unit CT102 24) 13,8kg 36 € 778,00
KSUN4224KS Kit for sliding gates up to 400 kg, 24 Vdc motor, control unit with slowdown, electric limit switch (with control unit CT102 24) 12,9kg 36 € 738,00
KSUN7224ES Kit for sliding gates up to 700 kg, 24 Vdc motor, control unit with slowdown, electric limit switch (with control unit CT102 24) 13,8kg 36 € 850,00
KSUN7224KS Kit for sliding gates up to 700 kg, 24 Vdc motor, control unit with slowdown, electric limit switch (with control unit CT102 24) 13,8kg 36 € 810,00
SUN KIT
53
54
With slowdown function both in opening and closing to preserve gate integrity
Easy maintenance thanks to the horizontal control unit position
With fixing plate included
With 24 Vdc control unit CT102 24
With 230 Vac control unit CT102B
Electronic and mechanical parts well protected from weather conditions
Sturdy and performing motorsLCD display
PLUS
MODELS
CODE DESCRIPTION PCS PALLET PRICE
SC4224 For sliding gates up to 400 Kg, 24 Vdc motor, control unit with slowdown and electric limit switch, with built-in radio receiver 36 € 518,00
TU7224 For sliding gates up to 700 Kg, 24 Vdc motor, control unit with slowdown and electric limit switch, with built-in radio receiver 36 € 725,00
SC52 For sliding gates up to 500 Kg, 230 Vac motor, control unit with slowdown and electric limit switch 36 € 574,00
SC82 For sliding gates up to 800 Kg, 230 Vac motor, control unit with slowdown and electric limit switch 36 € 656,00
ELECTROMECHANICAL GEAR MOTOR FOR SLIDING GATES UP TO 700 Kg, 24 Vdc ANDUP TO 800 Kg, 230 Vac
TURBO
55
95
184320
260
RN800 *M4 nylon rack L=1000
mm for gates up to 800 kg
CREM-8 **M4 zinc coated rack
30x8 mm L=1000 mm
CREM-12 **M4 zinc coated rack
30x12 mm L=1000 mm
EGS1Key selector with
all-metal body
TSWarning board
€/m 25,00 €/m 26,00 €/m 27,00 PC 1 € 60,00 PC 1 € 3,00
DIMENSIONS
SC4224 TU7224 SC52 SC82MECHANICAL DATAspeed cm/s 24 23 16 16torque Nm 18 34 16 23working cycle % 50 80 30 30ELECTRICAL DATAcontrol board CT10224 CT10224 CT102B CT102Bpower Vac 230 230 230 230consumption A 1,2 2,5 1,3 1,9absorbed power W 250 500 300 450capacitor µF - - 12,5 16thermoprotection °C - - 150 150GENERIC DATAprotection degree IP 44 44 44 44dimensions (L - D - H) mm 320 - 184 - 260 320 - 184 - 260 320 - 184 - 260 320 - 184 - 260weight kg 11 11 12 12,5working temperature °C -20 + 55 -20 + 55 -20 + 55 -20 + 55gate maximum weight Kg 400 700 500 800
ACCESSORIES
* pack of 10 pcs** pack of 4 pcs
56
With slowdown function both in opening and closing to preserve gate integrity
Electronic and mechanical parts well protected from weather conditions
Easy maintenance thanks to the horizontal control unit position
With fixing plate included
MODELS · WITHOUT NIGHT LIGHT SYSTEM
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
KSC4224ES Kit for sliding gates up to 400 kg, 24 Vdc motor, control unit with slowdown, electric limit switch (with control unit CT102 24) 12,7kg 36 € 681,00
KSC4224KS Kit for sliding gates up to 400 kg, 24 Vdc motor, control unit with slowdown, electric limit switch (with control unit CT102 24) 12,5kg 36 € 641,00
KTU7224ES Kit for sliding gates up to 700 kg, 24 Vdc motor, control unit with slowdown, electric limit switch (with control unit CT102 24) 12,7kg 36 € 794,00
KTU7224KS Kit for sliding gates up to 700 kg, 24 Vdc motor, control unit with slowdown, electric limit switch (with control unit CT102 24) 12,5kg 36 € 753,00
KSC52ES Kit for sliding gates up to 500 kg, 230 Vac motor, control unit with slowdown, electric limit switch (with control unit CT102B) 13,5kg 36 € 747,00
KSC52KS Kit for sliding gates up to 500 kg, 230 Vac motor, control unit with slowdown, electric limit switch (with control unit CT102B) 13,3kg 36 € 707,00
KSC82ES Kit for sliding gates up to 800 kg, 230 Vac motor, control unit with slowdown, electric limit switch (with control unit CT102B) 13,7kg 36 € 829,00
KSC82KS Kit for sliding gates up to 800 kg, 230 Vac motor, control unit with slowdown, electric limit switch (with control unit CT102B) 13,5kg 36 € 789,00
PLUS
FOR SLIDING GATES UP TO 700 Kg, 24 Vdc AND UP TO 800 Kg, 230 VacTURBO KIT
57
CT102B
CT10224
KIT COMPONENTS
TURBO LUMY RX4Y FT33 SUB-44WR SUB-44R
KSC4224ES • 1 PC • INTEGRATED • • 2 PCS
KSC4224KS • 1 PC INTEGRATED • • 2 PCS
KTU7224ES • 1 PC • INTEGRATED • • 2 PCS
KTU7224KS • 1 PC INTEGRATED • • 2 PCS
KSC52ES • 1 PC • • • • 2 PCS
KSC52KS • 1 PC • • • 2 PCS
KSC82ES • 1 PC • • • • 2 PCS
KSC82KS • 1 PC • • • 2 PCS
58
4
1
22
3
5
24 V, intensive use
24 V, intensive use
24 V, intensive use
HA8 (up to 12 mq)
HA12E (up to 19 mq)
HA12 (up to 19 mq)
SELECTION GUIDESYSTEM FOR SECTIONAL AND OVERHEAD DOORS
230 V, normal use
230 V, normal use
230 V, normal use
BS-50
BS5224
BS52
BLINDOGEAR MOTOR FOR SPRING OR COUNTERWEIGHTOVERHEAD DOORS UP TO 9 m2
HALOGEAR MOTOR FOR SECTIONAL DOORS UP TO19 m2 AND OVERHEAD DOORS UP TO 17 m2
STANDARD INSTALLATION FOR SECTIONAL DOORS
1 Gear motor2 Photocells3 Flashing light4 Key switch5 Radio transmitter
59
60
NIGHTLIGHTSYSTEM
NEW
NEW
NEW
Side-opening hatch for access to electronics
Illuminates garage with two rows of LEDs 4 m long, total output 40W LED
Carriage completely integrated into the runner
Two-button programming, with KUBE PRO receiver or with DYL cabled display
Door opening via smartphone (with KUBE)
Extruded aluminium rubber powder-coated in RAL9010
Standard runner with steel C-section available with belt drive system, total length 3 or 4m, one-piece or 3-piece runner for 3m lenght
3 installation modes: classic, on cross beam, on spring shaft
Compact head unit (total height 8 cm) with runner integral in unit, allowing installation close to the spring shaft
Side-opening hatch Installations on springshaft/cross beam
Rail with LED light Compact head unit (total height 8 cm)
PLUS
ELECTROMECHANICAL GEAR MOTOR FOR SECTIONAL DOORS UP TO 19 m2 AND OVERHEAD DOORS UP TO 17 m2, 24 Vdc
NEW POWERand new LED
rail RAL41 with 4 metres lighting
MODELS
CODE DESCRIPTION PCS PALLET PRICE
HA8 For sectional doors up to 11 sqm (with 3 m guide) or 12 sqm (with 4 m guide), a 24 Vdc motor and a control unit with an integrated receiver 64 € 430,00
HA12 For sectional doors up to 16 sqm (with 3 m guide) or 19 sqm (with 4 m guide), a 24 Vdc motor and a control unit with an integrated receiver 64 € 490,00
HA12E For sectional doors up to 16 sqm (with 3 m guide) or 19 sqm (with 4 m guide), “Low Energy” with 24 Vdc motor and a control unit with an integrated receiver 64 € 565,00
RAL31 Aluminum belt rail with integrated LED lighting, 3090 mm (1x3m) one-piece runner € 390,00
RAL41 Aluminum belt rail with integrated LED lighting, 4090 mm (1x4m) one-piece runner € 535,00
RAB3X1P Steel belt rail, 3100 mm (3x1.33m) 3-pieces runner € 100,00
RAB31 Steel belt rail, 3100 mm (1x3.1m) one-piece runner € 80,00
RAB41 Steel belt rail, 4100 mm (1x4.1m) one-piece runner € 140,00
RAB61 Steel belt rail, 6200 mm (2x3.1m) 2-pieces runner € 300,00
HALO
61
HA8 HA12 HA12E
RAB31 X XRAB3X1P X XRAB41 X XRAB61 XRAL31 XRAL41 X
330
330
3065 / 4065
3075 / 4075
114
70,5
235
235
P MAX = 84 mm
P MAX = 84 mm
HAL2Swinging arm for
counterweight overhead doors
SBCO External unlocking
systemL=3000 mm
HAL1Kit for external unlock with
key and metal cord for insulated overhead doors
SBLSTKit for external unlock with
key and metal cord for uninsulated overhead doors
HAL3Kit supplementary fixing
ceiling guide(for steel rail)
HAL4Kit 2 supplementary
fixing clamps(for steel rail)
HAL5Kit supplementary fixing
ceiling guide(for Led rail)
PC 1 € 115,00 PC 1 € 31,00 PC 1 € 40,00 PC 1 € 60,00 PC 1 € 5,00 PC 1 € 5,00 PC 1 € 30,00
HAL6Kit for wall support
(for Led rail)
TO1MTouch transmitter, 1
channels, rolling code
TO2MTouch transmitter, 2
channels, rolling code
TO2MPTouch transmitter, 2
channels, with motion sensor
TO1UTouch transmitter, 1
channel, rolling code, to be recessed in the door panel
550CABL045A00 *Special cable for Eclipse
RG174 50 Ohm + 4 × 0,50 mm² (100m)
520STAF029A00Fixing clamp
PC 1 € 5,00 PC 1 € 40,00 PC 1 € 45,00 PC 1 € 80,00 PC 1 € 40,00 PC 1 € 350,00 PC 1 € 3,00
DYLDisplay module
Cable length 120 cm (only 14A)
KUBEPROWireless module for
programming (only 14A)
KUBEModule for
automation control from smartphone
KBPNNiMH batteryback-up kit
KBPBattery back-up kit
PC 1 € 60,00 PC 1 € 90,00 PC 1 € 70,00 PC 1 € 150,00 PC 1 € 118,00
ACCESSORIES
COMPATIBILITY HEAD - RAIL
HA8 HA12 HA12EMECHANICAL DATAspeed cm/s 15 15 15force N 800 1200 1200max cycles/hour (1) 20 20 20ELECTRICAL DATApower supply Vac 230 (±10%) 50Hz 230 (±10%) 50Hz 230 (±10%) 50Hzflashing W 3 max 3 max 3 maxcourtesy light on guide with integrated LEDs W - 40 max 40 maxaccessories power output mA 100 (24 Vdc not regulated)
max no. of transmitters that can be stored ROLLING CODE 90 90 90
GENERIC DATAdegree of protection IP 20 20 20dimensions (L x D x H): mm 235 - 330 - 84 235 - 330 - 84 235 - 330 - 84weight kg 6,250 6,8 6,8working temperature °C -10 + 45 -10 + 45 -10 + 45maximum door size m2 12 19 19maximum door weight kg 120 200 200
(1) for 2,4x2m LxH doorData are subject to smoothness and balance of the door and the type of rail used
Sectional Up-and-over
HA8 with 3 m guide
S max=11m² S max=10m²
HA8 with 4 m guide
S max=12m² S max=11m²
Sectional Up-and-over
HA12, HA12E with 3 m guide
S max=16m² S max=16m²
HA12, HA12Ewith 4 m guide
S max=19m² S max=17m²
LIMIT USE DIMENSIONS
LED KIT - KIT TO LIGHT UP THE GARAGE DOOR
+ + o =KVIPLEDFW
orKVIPLEDFB
QUADRONight sensor
VIP1Main board for led
lights control
STIKFWLed garden lights
(white color). PCS 2
STIKFBLed garden lights
(brown color). PCS 2 PC 1 € 180,00
* we recommend not to exceed 4 mt connection length to avoid
significant radio range losses
ME
AN
S P
RO
DU
CTS
WIT
H L
ON
GE
R D
ELI
VE
RY
TIM
E (W
ITH
IN 6
WE
EK
S)
62
MODELS
Battery back-up (optional in case of power failure)
New built-in led courtesy light
Water resistant SUB remote control included
New PLAY remote control included
PLUS
Cross beam installationSpring shaft installation Classic installation
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
HA8SS For sectional doors up to 11 sqm (with 3 m guide) or 12 sqm (with 4 m guide), a 24 Vdc motor and a control unit with an integrated receiver 6,3kg 64 € 500,00
HA12SS For sectional doors up to 16 sqm (with 3 m guide) or 19 sqm (with 4 m guide), a 24 Vdc motor and a control unit with an integrated receiver 6,8kg 64 € 560,00
HA8PP For sectional doors up to 11 sqm (with 3 m guide) or 12 sqm (with 4 m guide), a 24 Vdc motor and a control unit with an integrated receiver 6,3kg 64 € 480,00
HA12PP For sectional doors up to 16 sqm (with 3 m guide) or 19 sqm (with 4 m guide), a 24 Vdc motor and a control unit with an integrated receiver 6,8kg 64 € 540,00
KIT COMPONENTS
HEAD SUB-44WR PLAY4R
HA8SS • 1 PC • 2 PCS
HA12SS • 1 PC • 2 PCS
HA8PP • 1 PC • 2 PCS
HA12PP • 1 PC • 2 PCS
ELECTROMECHANICAL GEAR MOTOR FOR SECTIONAL DOORS UP TO 19 m2 AND OVERHEAD DOORS UP TO 17 m2, 24 Vdc
HALO KIT
63
64
230 Vac motor, with pre-installed opening and closing limit switches
24 Vdc motor with encoder
With 230 Vac control unit CT102B
With 24 Vdc control unit CT10224
With slowdown function, granting doors integrity
External release for easy manual unlock from outside
BLINDO
MODELS
PLUS
ELECTROMECHANICAL GEAR MOTOR FOR SPRING OR COUNTERWEIGHT OVERHEAD DOORS UP TO 9 m2, 24 Vdc AND 230 Vac
CODE DESCRIPTION PCS PALLET PRICE
BS-50 For spring or counterweight overhead doors up to 9 m2, 230 Vac motor, without control unit and slowdown. With internal release system and preset for unlocking from outside 40 € 405,00
BS52For spring or counterweight overhead doors up to 9 m2, 230 Vac motor, control unit and slowdown, with opening and closing limit switches. With internal release system and preset for unlocking from outside
40 € 595,00
BS5224 For spring or counterweight overhead doors up to 9 m2, 24 Vdc motor, control unit, with encoder and slowdown. With release system and preset for unlocking from outside 40 € 708,00
Gearbox with metal gearsHigh precision limit switches
65
2,5
2,2571
140
180
BCStandard curvedtelescopic arm
BDStraight telescopic
arm
BDNSStraight telescopic
arm with driller round bar to avoid welding pipes
BOCBushing
SBCOExternal unlocking
systemL=3000 mm
HAL1Kit for external unlock with
key and metal cord for insulated overhead doors
SBLSTKit for external unlock with
key and metal cord for uninsulated overhead doors
PC 1 € 77,00 PC 1 € 33,00 PC 1 € 55,00 PC 1 € 12,00 PC 1 € 31,00 PC 1 € 40,00 PC 1 € 60,00
ST-1800Motor support
bracketL=1800 mm
TZ-1500Pair of transmission
arms, length 1500 mm, with supports
TZ-2000Pair of transmission
arms, length 2000 mm, with supports
TSWarning board
PC 1 € 62,00 PC 1 € 82,00 PC 1 € 93,00 PC 1 € 3,00
BS-50 BS52 BS5224MECHANICAL DATAtorque Nm 440 440 350working cycle % 30 30 80ELECTRICAL DATAcontrol board - CT102B CT10224power Vac 230 230 230consumption A 1,8 1,8 1,3absorbed power W 400 400 300capacitor µF 12,5 12,5 -thermoprotection °C 150 150 -integrated lights yes yes yesGENERIC DATAprotection degree IP 43 43 43dimensions (L - D - H) mm 580 - 190 - 140 580 - 190 - 140 580 - 190 - 140weight kg 10 10,3 10working temperature °C -20 + 55 -20 + 55 -20 + 55door maximum dimensions m2 9 9 9
Values here above are valid if motor is used with standard accessories
LIMIT USE
ACCESSORIES
DIMENSIONS
Leaf
max
hei
ght
(m)
Projecting up-and-over door
No projecting up-and-over door
66
MODELS
BLINDO KIT
KIT COMPONENTS
BLINDO RX4Y SUB-44WR BDNS ST-1800 TZ-1500
KBS52PS • 1 PC • • 2 PCS • 2 PCS • •
KBS5224PS • 1 PC INTEGRATED • 2 PCS • 2 PCS • •
230 Vac motor, with pre-installed opening and closing limit switch
External release for easy manual unlock from outside
With slowdown function, granting doors integrity
Water resistant SUB remote control included
PLUS
FOR OVERHEAD DOORS UP TO 9 m2, 230 Vac
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
KBS52PS Kit for spring and counterweight overhead doors up to 9 m2, 230 Vac motor, control unit with slowdown function (with control unit CT102B) 26kg 18+9 € 800,00
KBS5224PS Kit for spring and counterweight overhead doors up to 9 m2, 24 Vdc motor, control unit with slowdown function (with control unit CT10224) 26kg 18+9 € 897,00
67
68
69
KEY INDUSTRY INDUSTRY AND COMMERCIAL SOLUTIONS
SYSTEMS FOR SWING GATES 70
STAR 500 72
SYSTEMS FOR SLIDING GATES 74
TURBO 160 76
TURBO 200 78
TURBO 400 80
ROAD BARRIERS 82
ALT 84
ACCESSORIES 86
SYSTEMS FOR ROLLING SHUTTERS 88
SHARP 60 / 60BM 90
SHARP 76 / 76BM 92
70
4
5
1 12 2
3 3
6
230 V, normal use
24 V, intensive use, irreversible
PS-400FA
PS400-24FA
SELECTION GUIDESYSTEM FOR SWING GATES
STAR 500GEAR MOTOR FOR LEAVES UP TO 5 m
STANDARD INSTALLATION FOR SWING GATES
1 Post for photocells2 Gear motor3 Photocells4 Flashing light5 Key switch6 Radio transmitter
71
72
Easy mechanical release
Double bearing on the main screw to grant robustness and movement fluidity
Opening mechanical stop to control your gate movement
Compatible with 230 Vac control unit CT202
Compatible with 24 Vdc control unit 14AB2
Mechanical parts well protected from weather conditions
STAR 500ELECTROMECHANICAL GEAR MOTOR FOR SWING GATES WITH LEAVES UP TO 5 m, 24 Vdc AND 230 Vac
MODELS
PLUS
Easy mechanical release Double bearing on the main screw to grant robustness and movement
fluidity
Robust bronze lock nut on endless screw
CODE DESCRIPTION PCS PALLET PRICE
PS-400FA For swing gates with maximum length 5 m, 230 Vac motor, with opening mechanical stop 25 € 472,00
PS400-24FA For swing gates with maximum length 5 m, 24 Vdc motor, with opening mechanical stop, irreversible, with encoder 25 € 533,00
73
4,54 52 3 3,52,5
600
300
400
500
200
108
110
995
490460
Gate shape and height and weather conditions can considerably reduce the values shown above, in the graph. 230 Vac motors are suggested for windy areas.
LIMIT USE DIMENSIONS
PS-400FA PS400-24FAMECHANICAL DATAspeed cm/s 1,4 2,7pulling force N 1800 1400working cycle % 30 80opening time at 90° sec 35 25-35ELECTRICAL DATAcontrol board CT202 14AB2
powerVac 230 -Vdc - 24
consumption A 1,1 5absorbed power W 250 120capacitor µF 10 -thermoprotection °C 150 -GENERIC DATAprotection degree IP 44 44dimensions (L - P - H) mm 995 - 108 - 110 995 - 108 - 110weight kg cad 9,5 9,5working temperature °C -20 + 55 -20 + 55leaves maximum weight Kg 600 600
ME
AN
S P
RO
DU
CTS
WIT
H L
ON
GE
R D
ELI
VE
RY
TIM
E (W
ITH
IN 6
WE
EK
S)
ELS-CHorizontal 12 V
electrolock
FC-PSMechanical closing stop
STPOAVSRear welded bracket
STANAVFront welded bracket
14AB2Control unit in box for two
24 Vdc motors
CT202Control unit in box for two
230 Vac motors
TSWarning board
PC 1 € 150,00 PC 1 € 16,00 PC 1 € 20,00 PC 1 € 18,00 PC 1 € 405,00 PC 1 € 328,00 PC 1 € 3,00
ACCESSORIES
Max
leaf
wei
ght
(kg)
Max leaf length (m)
74
4
5
1 12
3 3
6
230 V, normal use, up to 1600 Kgelectric limit switch
400 V, normal use, up to 4000 Kgmagnetic limit switch
230 V, intensive use, up to 2000 Kg magnetic limit switch
230 V, normal use, up to 2500 Kgmagnetic limit switch
SC162
SC400M
SC202MHD
SC252M
SELECTION GUIDESYSTEMS FOR SLIDING GATES
TURBO160GEAR MOTOR FOR GATES UP TO 1600 Kg
TURBO 400GEAR MOTOR FOR GATES UP TO 4000 Kg
TURBO 200GEAR MOTOR FOR GATES UP TO 2500 Kg
STANDARD INSTALLATION FOR SLIDING GATES
1 Post for photocells2 Gear motor3 Photocells4 Flashing light5 Key switch6 Radio transmitter
75
76
With slowdown function both in opening and closing to preserve gate integrity
Easy maintenance thanks to the horizontal control unit position
With fixing plate included
With 230 Vac control unit CT102B
Electronic and mechanical parts well protected from weather conditions
MODELS
TURBO 160
PLUS
Bronze gears Sturdy and performing motorsLCD display
CODE DESCRIPTION PCS PALLET PRICE
SC162 For sliding gates up to 1600 Kg, 230 Vac motor, control unit with slowdown and electric limit switch 36 € 815,00
ELECTROMECHANICAL GEAR MOTOR FOR SLIDING GATES UP TO 1600 Kg, 230 Vac
77
95
184320
260
DIMENSIONS
SC162MECHANICAL DATAspeed cm/s 16torque Nm 40working cycle % 30ELECTRICAL DATAcontrol board CT102Bpower Vac 230consumption A 2,5absorbed power W 600capacitor µF 20thermoprotection °C 150GENERIC DATAprotection degree IP 44dimensions (L - D - H) mm 320 - 184 - 260weight kg 14,5working temperature °C -20 + 55gate maximum weight Kg 1600
* Pack of 4 pcs
ME
AN
S P
RO
DU
CTS
WIT
H L
ON
GE
R D
ELI
VE
RY
TIM
E (W
ITH
IN 6
WE
EK
S)
CREM-12 *M4 zinc coated rack
30x12 mm L=1000 mm
TSWarning board
€/m 27,00 PC 1 € 3,00
ACCESSORIES
78
The SC202MHD gearmotor now comes with a electro-mechanical brake as a standard
Easy maintenance thanks to the horizontal control unit position
New heavy-duty version with cooling fan for higher intensity of use
With 230 Vac control unit CT102B
Electronic and mechanical parts well protected from weather conditions
TURBO 200
PLUS
ELECTROMECHANICAL GEAR MOTOR FOR SLIDING GATES UP TO 2500 Kg, 230 Vac
MODELS
CODE DESCRIPTION PCS PALLET PRICE
SC202MHD For sliding gates up to 2000 Kg, 230 Vac motor, control unit with magnetic limit switchand mechanical electro-brake. M4 pinion. Intensive use 16 € 1.282,00
SC252M For sliding gates up to 2500 Kg, 230 Vac motor, control unit with magnetic limit switch.M4 pinion 16 € 984,00
Aluminum polished base and rised fixing plate
Cooling fan (SC202MHD)for intensive use
Sturdy and performing motorsHidden external case fixing
79
230
270
360
390
480RM6Z12Pinion M6 Z12
CREM-12 *M4 zinc coated rack
30x12 mm L=1000 mm
CREM-30 **M6 zinc coated rack
30x30 mm L=1000 mm
SC-EFMechanical electro-brake
(for SC252M)
TSWarning board
PC 1 € 40,00 €/m 27,00 €/m 59,00 PC 1 € 52,00 PC 1 € 3,00
DIMENSIONS
SC202MHD SC252MMECHANICAL DATAspeed cm/s 17 17torque Nm 93 110working cycle % 50/70* 30ELECTRICAL DATAcontrol board CT102B CT102Bpower Vac 230 230consumption A 4 4absorbed power W 580 580capacitor µF 25 35thermoprotection °C 150 150GENERIC DATAprotection degree IP 44 44dimensions (L - D - H) mm 360 - 270 - 390 360 - 270 - 390weight kg 25 24working temperature °C -20 + 55 -20 + 55gate maximum weight Kg 2000 2500
* variable according to the gate weight and dimensions
* Pack of 4 pcs** Pack of 2 pcs
ACCESSORIES
80
Electric brake, to grants safety also on heaviest installations
Easy maintenance thanks to the control unit position
With 400 Vac control unit CT-400
Electronic and mechanical parts well protected from external debris
MODELS
TURBO 400
PLUS
CODE DESCRIPTION PCS PALLET PRICE
SC400M For sliding gates up to 4000 Kg, 400 Vac motor, control unit with slowdown and magnetic limit switch. M6 pinion 4 € 2.900,00
ELECTROMECHANICAL GEAR MOTOR FOR SLIDING GATES UP TO 4000 Kg, 400 Vac
Sturdy and high-performing motorAnti-UV rays coating
81
300
520 260
585
CREM-30 *M6 zinc coated rack
30x30 mm L=1000 mm
TSWarning board
€/m 59,00 PC 1 € 3,00
DIMENSIONS
SC400MMECHANICAL DATAspeed cm/s 17torque Nm 180working cycle % 30*ELECTRICAL DATAcontrol board CT-400power Vac 400consumption A 2absorbed power W 750thermoprotection °C 150GENERIC DATAprotection degree IP 54dimensions (L - P - H) mm 520 - 300 - 585weight kg 76working temperature °C -20 + 55gate maximum weight Kg 4000
* variable according to the gate weight and dimensions
* Pack of 2 pcs
ME
AN
S P
RO
DU
CTS
WIT
H L
ON
GE
R D
ELI
VE
RY
TIM
E (W
ITH
IN 6
WE
EK
S)
ACCESSORIES
82
45
1 1
2
33
6
24 V, intensive usewith built-in flashing light
24 V, intensive usewith built-in flashing light
24 V, intensive usewith built-in flashing light
ALT324KF
ALT624K
ALT424K
SELECTION GUIDEROAD BARRIERS
ALT3BARRIER UP TO 3 m
ALT6BARRIER UP TO 8,4 m
ALT4BARRIER UP TO 5 m
STANDARD INSTALLATION FOR ROAD BARRIERS
1 Post for photocells2 Barrier3 Photocells4 Flashing light5 Key switch6 Radio transmitter
83
84
For intensive use, for private and public solutions
Double built-in flashing light, two-coloured green/red
Double spring (6 m model) to counter balance movement and make it more fluent
Universal box: bar can be installed both right or left
Possibility to set different speed in opening and closing motion
With 24 Vdc control unit CT10224
Encoder for obstacle detection and immediate run inversion
Robust gears and levers for reliable functioning over time
Energy saving mode
Integrated receiver
Anti-UV rays epoxy power coating
ALT
PLUS
Maximum speed: - up to 1 second for ALT324KF- up to 3,5 seconds for ALT424K- up to 6 seconds for ALT624K
ROAD BARRIER WITH DOUBLE BUILT-IN FLASHING LIGHT FOR BAR FROM 3 TO 8 m, 24 Vdc
MODELS
CODE DESCRIPTION PCS PALLET PRICE
ALT324KF Barrier body, 24 Vdc motor, with control unit in box, with integrated receiver, with encoder, double built-in led flashing light. For 3 m bar, connection for bars included 5 € 1.987,00
ALT424K Barrier body, 24 Vdc motor, with control unit in box, with integrated receiver, with encoder, double built-in led flashing light. For 4 m bar, connection for bars included 8 € 1.673,00
ALT624K Barrier body, 24 Vdc motor, with control unit in box, with integrated receiver, with encoder, double built-in led flashing light. For 6 m bar, connection for bars included 5 € 2.144,00
Metallic gear + shock resistant motor (ALT624K)
CT10224 control unit New bar of 5 m for ALT4KDouble Led flashing light
85
ALT424K ALT624K
320
1110
400
1188
LP
220
280
3 m ALT324KF + AST3F 2740 mm
4 m ALT424K + ASTL4 3780 mm
4 m ALT424K + ASTL4J 3780 mm
5 m ALT424K + ASTL5 4780 mm
6 m ALT624K + ASTL6 5640 mm
6 m ALT624K + ASTL6J 5640 mm
8 m ALT624K + ASTL8 8040 mm
DIMENSIONS
CLEAROPENING (LP)BAR CODE
ALT324KF ALT424K ALT624KMECHANICAL DATAtorque Nm 40 200 305working cycle % 50 80 80opening time at 90° ** sec 1 3,5 6/12*ELECTRICAL DATAcontrol board CT10224F CT10224 CT10224power Vac 230 230 230consumption A 1,6 1,3 1,3absorbed power W 330 300 300integrated lights yes yes yesGENERIC DATAprotection degree IP 54 54 54dimensions (L - D - H) mm 450 - 280 - 1188 360 - 220 - 1110 450 - 280 - 1188weight kg 62 47 67working temperature °C -20 + 55 -20 + 55 -20 + 55maximum bar length m 3 4 6 *(8 mt)
* with 8 m bar** without accessories
86
* for ASTL5 we recommend to combine PROFT6 and KLIGHT6
AST3FAluminum tubular bar L=3
m Ø 60 mm (not fitting with accessories)
CP-BR6Anchorage plate
with rag bolts
PC 1 € 87,00 PC 1 € 63,00
APFXFixed support
RAL 7047
APMMobile support
RAL 9010
CTLIGHT2Control unit for
KLIGHT
KLIGHT4Led lights for 4 m bar
KLIGHT6Led lights for 5 and 6
m bar
KLIGHT8Led lights for 8 m bar
LOOPMagnetic sensor, one coil, two outputs (impulse and
presence)
PC 1 € 93,00 PC 1 € 98,00 PC 1 € 52,00 PC 1 € 80,00 PC 1 € 120,00 PC 1 € 160,00 PC 1 € 250,00
SKIRT2Kit fence, length
1,7 m
KBPBattery back-up kit
KITFIXBATTFixing batteries
brackets
ADRed reflecting
adhesive stripes
TWINInterface for
master/slave function
PC 1 € 195,00 PC 1 € 118,00 PC 1 € 14,00 PC 1 € 25,00 PC 1 € 50,00
ALT324KF ACCESSORIES
ASTL4Aluminum bar
L=4 m Ø 60 mm(without accessories)
ASTL4J2+2 m aluminum bar Ø 60
mm + joint
AS-SNO3Aluminum bar with artic lated joint (max. L. 3 m) preassem-
bled. Only for ALT424K
ASTL5 *Aluminum bar
L=5 m Ø 60 mm(without accessories)
CP-BRAnchorage plate
with rag bolts
PROFTFlexible rubber profile,8 m and plug set for ASTL4 (transparent)
PC 1 € 135,00 PC 1 € 219,00 PC 1 € 490,00 PC 1 € 167,00 PC 1 € 47,00 PC 1 € 72,00
ASTL6Aluminum bar
L=6 m Ø 90 mm(without accessories)
ASTL6J3+3 m aluminum bar, Ø 90
mm + joint
ASTL84,2+4,2 m
aluminum bar, Ø 90 mm + joint + springs
CP-BR6Anchorage plate
with rag bolts
PROFT6Flexible rubber profile,
12 m and plug set(transparent)
PROFT8Flexible rubber profile,
16 m and plug set(transparent)
PC 1 € 276,00 PC 1 € 330,00 PC 1 € 862,00 PC 1 € 63,00 PC 1 € 108,00 PC 1 € 141,00
ALT424K ACCESSORIES
ALT624K ACCESSORIES
ACCESSORIES
87
ASTL4 / ASTL4J CTLIGHT2 PROFT KLIGHT4
ASTL5 / ASTL6 / ASTL6J CTLIGHT2 PROFT6 KLIGHT6
ASTL8 CTLIGHT2 PROFT8 KLIGHT8
HOW TO CHOOSE THE LED LIGHT SYSTEM FOR BARRIERS
88
4
1
2 2
3
5
up to 180 Kg, with electro-brake
up to 170 Kg
SW6240EFE
SW6200
SELECTION GUIDESYSTEMS FOR ROLLING SHUTTERS
SHARPGEAR MOTOR FOR ROLLING SHUTTERSshaft Ø 42-48-60 mm rim 200-220 mm
SHARPGEAR MOTOR FOR ROLLING SHUTTERSshaft Ø 42-48-60 mm rim 200-220 mm
STANDARD INSTALLATION FOR ROLLING SHUTTERS
1 Gear motor 2 Photocells3 Flashing light4 Key switch5 Radio transmitter
up to 170 Kg, with electro-brake
up to 320 Kg
up to 320 Kg, with electro-brake
up to 350 Kg, with electro-brake
SW6200EF
SW12200
SW12200EF
SW12240EFE
89
90
Semi-automatic limit switch, easy and intuitive
Excellent performance thanks to noiseless gear motor
Electromagnetic brake version
Smooth reversibility in case of power failure
Low maintenance required with good resistance to wear
With 230 Vac control unit CT1RS
SHARP 60/60BM
PLUS
* Only with accessory ACSW002A00
MODELS
CODE DESCRIPTION PCS PALLET PRICE
SW6200 Motor for Ø 42*-48-60 mm shaft, rim Ø 200-220 mm, 170 Kg 45 € 221,00
SW6200EF Motor for Ø 42*-48-60 mm shaft, rim Ø 200-220 mm, 170 Kg. With electro-brake 45 € 252,00
SW12200 Motor for Ø 42*-48-60 mm shaft, rim Ø 200-220 mm, 320 Kg 45 € 369,00
SW12200EF Motor for Ø 42*-48-60 mm shaft, rim Ø 200-220 mm, 320 Kg. With electro-brake 45 € 410,00
ELECTROMECHANICAL GEAR MOTOR FOR ROLLING SHUTTERS, UP TO 320 Kg,230 Vac, SHAFT 60 mm
Solid and robust design High performance motorsLimit switch with fast adjustment
91
358
220
Ø 200
93
DIMENSIONS
SW6200 SW6200EF SW12200 SW12200EFMECHANICAL DATAspeed rpm 10 10 10 10torque Nm 175 175 325 325working cycle % 30 30 30 30ELECTRICAL DATAcontrol board CT1RS CT1RS CT1RS CT1RSpower Vac 230 230 230 230consumption A 2,8 2,8 5,6 5,6absorbed power W 600 600 1200 1200capacitor µF 20 20 35 35thermoprotection °C 170 170 170 170GENERIC DATAprotection degree IP 20 20 20 20dimensions (L - D - H) mm 350 - Ø 200 350 - Ø 200 350 - Ø 200 350 - Ø 200weight kg 8 9 11,5 12,5working temperature °C -20 + 55 -20 + 55 -20 + 55 -20 + 55
ACSW002A00Shaft adapter Ø 42
BMETMetal box with release
system
CT1RS230 Vac control unit with integrated receiver. In box
FT23Pair of photocells for
external use and flush-mounting (30x28x90 mm)
EGS1Key selector with
all-metal body
SW-EFElectro-brake with release
TSWarning board
PCS 2 € 5,00 PC 1 € 100,00 PC 1 € 125,00 PC 1 € 50,00 PC 1 € 60,00 PC 1 € 55,00 PC 1 € 3,00
ACCESSORIES
92
Semi-automatic limit switch, easy and intuitive
Excellent performance thanks to noiseless gear motor
76 mm shaft, single or bi-motor version
Electromagnetic brake version
Smooth reversibility in case of power failure
Low maintenance required with good resistance to wear
With 230 Vac control unit CT1RS
SHARP 76/76BM
PLUS
ELECTROMECHANICAL GEAR MOTOR FOR ROLLING SHUTTERS, UP TO 350 Kg,230 Vac, SHAFT 76 mm
MODELS
CODE DESCRIPTION PCS PALLET PRICE
SW6240EFE Motor for Ø 76 mm shaft, rim Ø 240 mm, 180 Kg. With electro-brake 45 € 390,00
SW12240EFE Motor for Ø 76 mm shaft, rim Ø 240 mm, 350 Kg. With electro-brake 45 € 477,00
Solid and robust design High performance motors
93
395
220
Ø 250
125
DIMENSIONS
SW6240EFE SW12240EFEMECHANICAL DATAspeed rpm 10 8torque Nm 175 370working cycle % 30 30ELECTRICAL DATAcontrol board CT1RS CT1RSpower Vac 230 230consumption A 2,8 5,6absorbed power W 600 1200capacitor µF 20 40thermoprotection °C 170 170GENERIC DATAprotection degree IP 20 20dimensions (L - D - H) mm 350 - Ø 200 399 - Ø 240weight kg 8 17,5working temperature °C -20 + 55 -20 + 55
BMETMetal box with release
system
CT1RS230 Vac control unit with integrated receiver. In box
FT23Pair of photocells for
external use and flush-mounting (30x28x90 mm)
EGS1Key selector with
all-metal body
SW-EFElectro-brake with release
TSWarning board
PC 1 € 100,00 PC 1 € 125,00 PC 1 € 50,00 PC 1 € 60,00 PC 1 € 55,00 PC 1 € 3,00
ACCESSORIES
ME
AN
S P
RO
DU
CTS
WIT
H L
ON
GE
R D
ELI
VE
RY
TIM
E (W
ITH
IN 6
WE
EK
S)
94
95
KEY ACCESSORIES
SMARTPHONE & APPS 96
KUBE PRO 96
KUBE 97
TRANSMITTERS 98
SUB 98
PLAY 100
TOUCH 101
XR CODE 102
RECEIVERS 102
RX4Y 102
UNIVERSAL RECEIVERS 103
POWER SUPPLY 104
SOLE 104
FLASHING LIGHTS 105
ECLIPSE 105
LUMY 106
PHOTOCELLS 107
SEKUR FT 107
SELECTOR & ACCESSORIES 108
EGO 108
SEKUR C 110
SEKUR CH 111
SAFETY EDGES 112
SEKUR CO/COR 112
SEKUR CO-W 113
CONTROL UNITS 114
14A 114
CT10224 116
CT20224 117
CT102B 118
CT202 119
RX2H/TX2B 120
CT1RS 121
CT-400 122
ACCESSORIES 123
PROGRAMMING FUNCTIONS 124
96
+
MODELS
App specifically designed for professional installers, for configuring doors and gates
KEY CLOUD: a set of services for viewing and backing up data, for the management of your team and the planning of scheduled maintenance in time
Compatible with 14A control unit from 3.0 firmware version and HALO
Wireless Bluetooth technology 4.2 LE
Easy and fast configuration
App native for Android 5.0/iOS 9.3.5 or superior with multilingual support
Compatible with smartphone Android and Apple equipped with Bluetooth 4.0 LE
PLUS
KUBE PROMODULE FOR SMARTPHONE PROGRAMMING
CODE DESCRIPTION PRICE
KUBEPRO Module for smartphone programming, for 14A and HALO € 90,00
97
+
MODELS
App specifically designed for end customers, for opening gates from a smartphone
Able to control garden lights, and manage other users’ access from the main smartphone
Synchronisation of automation status with Cloud and Kube Pro installer app
Compatible with 14A control unit from 3.0 firmware version and HALO
Wireless Bluetooth technology 4.2 LE
Easy and fast configuration
App native for Android 5.0/iOS 9.3.5 or superior with multilingual support
Compatible with smartphone Android and Apple equipped with Bluetooth 4.0 LE
PLUS
KUBEMODULE FOR AUTOMATION CONTROL FROM SMARTPHONE
CODE DESCRIPTION PRICE
KUBE Module for automation control from smartphone, for 14A and HALO € 70,00
98
Water resistant
Ergonomic, simple and modern design
Valuable materials and tidy details thanks to the new generation tri-injection molding process
Metal chromed insert
Different interchangeable colors
PLUS
ME
AN
S P
RO
DU
CTS
WIT
H L
ON
GE
R D
ELI
VE
RY
TIM
E (W
ITH
IN 6
WE
EK
S)
SUBWATER RESISTANT 4 CHANNELS TRANSMITTER, 433 MHz
MODELS
CODE DESCRIPTION PRICE
SUB-44WR 4 channels, white colour, XR rolling code € 41,00
SUB-44R 4 channels, black colour, XR rolling code € 41,00
SUB44WF 4 channels, white colour, XR rolling code, with on board receiver € 45,00
SUB44F 4 channels, black colour, XR rolling code, with on board receiver € 45,00
KSUB44WS 4 channels, white colour, XR rolling code, with sequential codes for multiple addition (10 pcs) € 440,00
SUB-44WRT 4 channels, white colour, XR rolling code, with transponder € 52,00
SUB-44WN 4 channels, fix code copier, white colour € 47,00
SUB-44ON * 4 channels, fix code copier, orange colour € 47,00
SUB-44BN * 4 channels, fix code copier, blue colour € 47,00
SUB-44DN * 4 channels, fix code copier, grey colour € 47,00
SUB-44MN * 4 channels, fix code copier, magenta colour € 47,00
SUB-44RN * 4 channels, fix code copier, red colour € 47,00
SUB-44GN * 4 channels, fix code copier, green colour € 47,00
SUB-44N * 4 channels, fix code copier, black colour € 47,00
* for COPIER SUB minimun order 50 pcs
99
SUB-44WR SUB-44R SUB44MR RING RXM23Y
ILSUB • 1 PC • 1 PC • 1 PC • 3 PCS • 1 PC = € 180,00
KRINGKey ring
PCS 10 € 6,00
ACCESSORIES
3 transmitters SUB (SUB-44WR white colour, SUB-44R black colour and SUB44MR magenta colour) rolling code, water resistant, 4 channels, 433 MHz
3 key rings (RING)
1 universal receiver 2 channels, rolling code, 1000 codes (RXM23Y)
KIT SUB
ILSUB
CODE DESCRIPTION PRICE
KSUB44OR Kit 10 SUB transmitters XR rolling code orange € 410,00
KSUB44BR Kit 10 SUB transmitters XR rolling code blue € 410,00
KSUB44DR Kit 10 SUB transmitters XR rolling code grey € 410,00
KSUB44MR Kit 10 SUB transmitters XR rolling code magenta € 410,00
KSUB44RR Kit 10 SUB transmitters XR rolling code red € 410,00
KSUB44GR Kit 10 SUB transmitters XR rolling code green € 410,00
KSUB44WR Kit 10 SUB transmitters XR rolling code white € 410,00
KSUB44-R Kit 10 SUB transmitters XR rolling code black € 410,00
100
Rolling code remote control with 4 channels
Simple, functional and ergonomic. Easy battery replacement
The new remote control can manage any Key Automation installations, either pre-exisiting or new
Car sun visor holder included
PLUS
PLAY4 CHANNELS TRANSMITTER, 433 MHz
MODELS
CODE DESCRIPTION PRICE
KPLAY4R 4 channels, kit 2 transmitters in ABS, rolling code, inverted colours charcoal grey / light grey € 66,00
KPLAY4F 4 channels, kit 2 transmitters in ABS, rolling code with on board receiver, inverted colours charcoalgrey / light grey € 72,00
KPLAY4N 4 channels, kit 2 transmitters in ABS, fix code copier, inverted colours charcoal grey / light grey € 78,00
101
Ø 35 mm
MODELS
TOUCH1/2 CHANNELS TOUCH TRANSMITTER, 433 MHz
PLUS
Touch type transmitter Rolling Code 433.92MHz, 1/2 channels with adjustable operation
Motion sensor with adjustable brightness threshold and detection range (only on TO2MP)
Sensor or transmitter operation activated via touch keys (only on TO2MP)
Door opening, automatic lights switching-on with motion sensor, manual lights switching on/off (only on TO2MP)
Ideal for wall installation and recessed installation on door panel (TO1U only)
Recessed mounting, 35mm diameter and 13mm depth (TO1U only)
Battery CR 2450 (TO1U only)
CODE DESCRIPTION PRICE
TO2MP 2 channels touch transmitter, with motion sensor € 80,00
TO1M 1 channel touch transmitter, rolling code € 40,00
TO2M 2 channels touch transmitter, rolling code € 45,00
TO1U 1 channel touch recessed transmitter, rolling code € 40,00
102
PLUS
The main features are: wireless programming of transmitters, programming of receivers, code visualization, addition of transmitters, cancellation of transmitters, read and copy of the receiver memory on
the palm programmer and vice versa, receiver lock, association of data at every code, multiple insertion
Software download at www.keyautomation.it
MODELS
MODELS
PLUS
XR CODE MANAGER
RX4Y
Plug-in receiver, fixed or rolling code with automatic selection
4 channels output
Memory up to 1000 codes
PALM PROGRAMMER FOR XR ROLLING CODE, 433 MHz
PLUG-IN RECEIVER, 433 MHz
CODE DESCRIPTION PRICE
XRMAN Programmer for XR rolling code € 410,00
CODE DESCRIPTION PRICE
RX4Y 4 channels plug-in receiver, fix or rolling code, 1000 codes, green led, 433MHz € 57,00
103
MODELS
RXM-44R
RXM23Y
4 CHANNELS UNIVERSAL RECEIVERS
2 CHANNELS UNIVERSAL RECEIVERS
MODELS
CODE DESCRIPTION PRICE
RXM-44R Universal receiver 4 channels, rolling code, 220 codes € 95,00
CODE DESCRIPTION PRICE
RXM23Y Universal receiver 2 channels, fix or rolling code, 1000 codes € 75,00
ELECTRICAL DATAreception frequency MHz 433,920
powerVac 12-24Vdc 12-24
max consumption mA 70relay contacts max supply A 1
GENERIC DATAprotection degree IP 44dimensions (L - D - H) mm 130 - 80 - 120operating temperature °C -20 + 55
104
KIT COMPONENTS
PF30W
BOX WITH CONTROL
CARD
PANELMOUNTING BRACKET
PF30W • 1 PC
SOLEAU • •
Stainless steel mounting kit design offers easy installation on fixed, flat or pole mount
30W solar panel and recharge controller for guaranteed reliable operation
Rugged design to withstand high wind pressure, hail and snow load
Most of the wiring is all done for you
Sliding gate motors compatible: SUN series 24V, TURBO series 24V
Swing gate motors compatible: RAY series 24V, Star series 24V, RÉVO series, MEWA series 24V, UNDER series 24V
Sectional motors compatible: HALO series
Road barriers compatible: ALT series 24V
PLUS
ME
AN
S P
RO
DU
CTS
WIT
H L
ON
GE
R D
ELI
VE
RY
TIM
E (W
ITH
IN 6
WE
EK
S)
SOLAR PANEL CASE WITH CONTROL CARD
Model SLP030W - 24VPeak Power (Pmax) W 30Voltage at Pmax (Vmp) V 34.4Current at Pmax (Imp) A 0.87Open circuit Voltage (Voc) V 43.2Short-circuit Current (Isc) A 0.96Working temperature °C -40 ~ +85
PV voltage V ≤ 50Maximum current A 20Rated voltage V 24Wiring PCB terminal, ≤6mm2
Working temperature °C -20 ~ +50Storage temperature °C -30 ~ +60Working humidity % 10 ~ 90Plastic box dimension (L - D - H) mm 316 × 188 x 396Weight (box without batteries) kg 3 (+ 25kg for the batteries)Protection degree IP 56
SOLESOLAR POWER KIT FOR THE AUTOMATION OF ROAD BARRIERS AND GATES
MODELS
CODE DESCRIPTION WEIGHT PCS PALLET PRICE
PF30W 30 W solar panel 2,9 Kg € 103,00
SOLEAU Box with control card and fixing hardware for solar panel (without batteries) 5 Kg 36 € 300,00
105
MODELS
MECHANICAL DATAmaximum cycle operation (led flashing) % 50/100maximum cycle operation (courtesy light) % 100ELECTRICAL DATA
power led flashing/courtesy lightVdc 24-35Vac 20-24
absorbed courtesy light W 2absorbed led flashing W 3antenna frequency MHz 433,92GENERIC DATAprotection degree IP 44colour (led flashing) - ambercolour (courtesy light) - whitedimensions (L - D - H) mm 75 - 98 - 190operating temperature °C -20 + 55
New wall support
New generation Led flashing light made of high-technological materials molded with bi-injection process
Integrated antenna with radio board
Multiple positioning both horizontally and vertically
Flashing light with blinking amber color LED light when automation is activated
Courtesy light: fixed white led light commanded by an internal crepuscular sensor. Courtesy light is automatically activated independently from the automation (with 14A control board)
PLUS
Vertical installation on column Horizontal installation on column
ECLIPSEFULL LED FLASHING AND COURTESY LIGHT
CODE DESCRIPTION PRICE
ECLIPSE Led flashing and courtesy light with crepuscular sensor and built-in antenna € 87,00
106
MODELS
LUMYFLASHING LIGHT
CODE DESCRIPTION PRICE
LUMY-24 24 Vdc flashing light, 25 W, with antenna € 53,00
LUMY-230 230 Vac flashing light, 25 W, with antenna and internal board for flashing light control € 53,00
LUMY-230E 230 Vac flashing light, 25 W, with antenna € 53,00
ANTS-433433 MHz, aerial with steel
bracket and 5 mrg-58 cable 5000 mm
SULUSupport for LUMY
PC 1 € 22,00 PC 1 € 8,00
ACCESSORIES
107
FT33 FT23 FT43 FT42B
ACCESSORIES
FT33 FT23 FT43 FT42BELECTRICAL DATA
powerVac 12-24 12-24 12-24 12-24Vdc 12-35 12-35 12-35 12-35
range m 25 25 25 20consumption rx mA 27 27 27 35consumption tx mA 10 10 10 0,04relay contacts max supply A 1 1 1 1GENERIC DATAprotection degree IP 54 54 54 54dimensions (L - D - H) mm 80 - 33 - 90 30 - 28 - 90 35 - 35 - 110 35 - 35 - 110operating temperature °C -20 + 55 -20 + 55 -20 + 55 -20 + 55
New logic circuit with improved performance
Snow function: photocell activates an adaptatively temporized mode, in case of frequent dimming or darkening, to avoid false obstacles detection
Two programmable ranges
SEKUR FTPHOTOCELLS
MODELS
CODE DESCRIPTION PRICE
FT33 Pair of photocells for external use and flush mounting € 55,00
FT23 Pair of photocells for external use for small pillars € 50,00
FT43 Pair of photocells for external use adjustable through 180°, for small pillars € 64,00
FT42B Pair of photocells for external use adjustable through 180°, for small pillars, battery powered € 85,00
PLUS
BAT-3Kit battery for FT42B
MUR-P Plastic wall
support for FT32
PC 1 € 17,00 PC 1 € 2,00
108
EGOTOUCH DIGITAL KEYPAD
MODELS
CODE DESCRIPTION PRICE
EGKTB1 Touch keypad via PowerBUS € 150,00
EGKTB2 Touch keypad via PowerBUS with Bluetooth and clock (coming soon) € 250,00
EGKTR1 Touch keypad via 2-channel radio (coming soon) € 150,00
EGKTB1 EGKTB2 EGKD2
PowerVac 10-24 10-24 10-24
Vdc 12-34 12-34 12-34
Absorbed powerTypical 0,25 W 0,35 W 0,2 W
Max 0,5 W 0,7 W 1,5 W
N° of outputs - - 2
Maximum cable length m 50 m with 2x0,35 mm2 cable
N° of memorized codes - - 50
Max n° of devices connected to the PowerBUS line 20
Relay characteristics - -Clean contact
50V 0,2A(resistive load)
Operating temperature °C -10 +55
Protection degree IP 55 55 30
109
79 mm 21,65 mm
79 m
m
15,8 mm
Ø 6
0 m
m
PLUS EGKTB1 e EGKTB2 (to be paired with EGKD2 decoder)
PLUS EGKTR1 (to be paired with all Key Automation receivers)
EGKD2 2 channels decoder for EGKTB1 and EGKTB2
RXM23YUniversal receiver 2
channels, fix or rolling code, 1000 codes
900SUPP001A00Brushed and painted
back metal cover
900SUPP022A00Flush-mounted back
plastic cover
PC 1 € 100,00 PC 1 € 75,00 PC 1 € 15,00 PZ. 1 € 2,00
ACCESSORIES
Touch keyboard via PowerBUS with 2-wire power supply
Backlighting with RGB LED in 7 selectable colours
Rainbow feature for automatic colour changing
Energy saving mode: the lighting switches off during the day, controlled by an environment sensor
Silent mode: possibility of turning off the buzzer
Power supply: 10-24 Vac and 12-34 Vdc
Flush-mounted version compatible with LEGRAND® 080021 built-in box and other commonly available ones
Touch keyboard via radio 433.920 MHz rolling code with integrated antenna
Backlighting with RGB LED in 7 selectable colours
Energy saving mode: the lighting switches off during the day, controlled
Hand-brushed and painted metal bottom (optional)
Possibility of generating time-sensitive access codes
Easy access code customisation up to 50 codes, installer action not required
Possibility of rolling out the system to up to 20 devices connected in parallel to the PowerBUS
Decoder with 2 programmable relays (impulse, bistable and timed types)
Database access management via app and cloud server: ideal for B&Bs, gyms, small garages (only for EGKTB2)
by an environment sensor
Silent mode: possibility of turning off the buzzer
Powered by AAA batteries easily available commercially
Easy customisation of the access code
DIMENSIONS
BU
ILT-
IN V
ER
SIO
N
WA
LL V
ER
SIO
N
Wall
110
SEL-MEGS1 SEL-T BMET
SEKUR CKEY AND DIGITAL SWITCHES
CODE DESCRIPTION PRICE
EGS1 Key selector with all-metal body € 60,00
SEL-M Key selector, metal front, plastic back € 33,00
SEL-T Proximity sensor for transponder cards and proximity tag, metal front, plastic back, to be ordered together with DECSEL-T € 95,00
BMET Metal box with release system € 100,00
DECSEL-TDecoder for proximity
sensor SEL-T (max 500 memory codes)
SUB-44WRT4 channels transmitter,
rolling code, with transponder
TAGProximity tag with key ring
CARDKit 10 transponder card
PC 1 € 92,00 PC 1 € 52,00 PC 1 € 21,00 PC 1 € 80,00
ACCESSORIES
MODELS
PLUS EGS1
New design
200 key combinations available
All-metal body
Tamper-proof screw
DECSEL-TELECTRICAL DATA
powerVac 24 - 50/60 HzVdc 24
absorption mA 15 (cards reader) - 70 (decoder)
keypad + cards - connectionsreader A decoder/reader B
N° outputs 1 (2A 120Vac/24Vdc)maximum distance of keypad cables m 10N° of memorisable codes 500 (499 + 1 master)N° of card readers connected to one decoder 2
CH-51 CH-101
SEKUR CHPOSTS FOR PHOTOCELLS
CODE DESCRIPTION PRICE
CH-51 Pair of support posts H 50 cm, anodized aluminum € 98,00
CH-101 Pair of support posts H 100 cm, anodized aluminum € 129,00
FT23Pair of photocells for ex-ternal use for small pillars
SEL-TProximity sensor, to be ordered together with
DECSEL-T
SEL-MKey selector, metal front,
plastic back
SUMCHSupport head for
photocell and key switch
PC 1 € 50,00 PC 1 € 95,00 PC 1 € 33,00 PC 1 € 12,00
ACCESSORIES
MODELS
112
COMSC16/COMSC20/COMSC25
COMB12/COMB18
SEKUR CO/CORSAFETY SYSTEMS
MODELS
CODE DESCRIPTION PRICE
COMSC16 Mechanic safety edge, 1,6 m long for sliding gates. With micro-switches € 145,00
COMSC20 Mechanic safety edge, 2,0 m long for sliding gates. With micro-switches € 166,00
COMSC25 Mechanic safety edge, 2,5 m long for sliding gates. With micro-switches € 188,00
COMB12 Mechanic safety edge, 1,2 m long for overhead doors. With micro-switches € 88,00
COMB18 Mechanic safety edge, 1,8 m long for overhead doors. With micro-switches € 132,00
ANGPair of junction
corners left/right
TAPPair of caps left/right
GIUNJoints
PC 1 € 10,00 PC 1 € 5,00 PC 1 € 2,00
ACCESSORIES
Control board and resistance not included. With line COMB pair: ANG, TAP, GIUN
113
1
2 3
3
2
1
COMTX
SEKUR CO/W
COMRX
RADIO SAFETY EDGE SYSTEM, 868 MHz
Radio receiver-transmitter system for maximum safety and fast installation
Bidirectional 868MHz transmission
Up to 8 transmitters for each receiver
4 different frequencies to avoid interference
Possibility to connect mechanical or resistive safety edge 8.2kohm
Waterproof box
2 years battery lifetime (5 years with power saving mode)
PLUS
STANDARD INSTALLATION
1 Edge system2 Transmitter3 Receiver
1 Edge system2 Transmitter3 Receiver
MODELS
CODE DESCRIPTION PRICE
COMTX 868MHz radio transmitter for safety edge € 74,00
COMRX 868MHz radio receiver for safety edge control € 100,00
KCOMW Radio transmitter and receiver kit with batteries included € 174,00
114
DYL display or KUBE PRO wireless module are mandatory to program 14A control unit
14A24 Vdc CONTROL UNIT
New generation control unit “One For All” to control all 24Vdc automations
NIGHT LIGHT SYSTEM to control Led lights during night hours
14A main functions:
• possibility to combine the power modules according to the installation (1 or 2 motors)
• same programming for different systems
• wide display in different languages to program both the motor and the radio receiver
• compatible with main home automation systems
• amperometric obstacle detection with run inversion
• standard or programmable slowdown in opening and closing
• programmable automatic partial closing
• separate OPEN-STOP-CLOSE inputs and PP - PARTIAL input
• safety edge 8,2K ohm NC - photo 1 and photo 2
• inputs and safety devices LED visualization
• optional test for safety edge
• LED courtesy light output
• open gate indicator output
• plug-in programmable radio receiver 4 channels
• for motors with or without encoder
• flashing light output with user indicator
• electro lock output
• battery back-up optional
PLUS
* mandatory for motors RAY4024E, INT24, SN-50-24, SN5024B
Display module (DYL)
Logic mainboard (MA24)
24Vdc 10A power module (PO24)Control unit in box for 2 24Vdc motors (BOX250)
4 channels plug-in receiver (RX4Y) Wireless module (KUBEPRO and KUBE)
MODELS
CODE DESCRIPTION PRICE
14AB2 * Control unit in box for two 24Vdc motors (without DYL and without receiver RX4Y) with transformer 250 VAmp € 405,00
14AB2F Control unit in box for two 24Vdc motors (without DYL and without receiver RX4Y) with transformer 250 VAmp to be paired with fast line motors € 426,00
MA24 Logic mainboard € 164,00
PO24 Power module 24Vdc 10A € 87,00
BOX250 Box with transformer 250 VAmp € 70,00
All kits that include the 14A control unit offer the possibility of adding up to 20 additional LED lights, to illuminate the entrance of the house during the night automatically and economically
115
DYLDisplay module cable
length 120 cm
RX4Y4 channels plug-inreceiver, 433MHz
KUBEPROWireless module for
programming
KUBEModule for automation
control from smartphone
QUADRONight sensor
PC 1 € 60,00 PC 1 € 57,00 PC 1 € 90,00 PC 1 € 70,00 PC 1 € 26,00
14AB2 14AB2FELECTRICAL DATAinput power Vac/Hz 230/50 230/50output power accessories Vdc 24 24max motor power W 300 300max working time sec 240 240max pause time sec 900 900obstacle detection yes yesGENERIC DATAprotection degree IP 54 54 dimensions (L - D - H) mm 222 - 275 - 110 222 - 275 - 110operating temperature °C -20 + 55 -20 + 55
ACCESSORIES
116
Same programming logic for all control boards CT102, CT202, CT102 24, CT202 24 with run inversion via software
Amperometric obstacle detection with run inversion
Standard or programmable slowdown in opening and closing
Programmable automatic partial closing
Separate OPEN-CLOSE inputs and PP - PARTIAL input
Safety edge 8,2Kohm NC / stop - photo 1 and photo 2
Inputs and safety devices LED visualization
Flashing light output fixed or flashing
LED courtesy light output
Open gate indicator or electro lock output
3 digits display
Optional photo test
Optional test for safety edge
Built-in receiver
Possibility to memorize up to 150 codes
PLUS
CT10224 ELECTRICAL DATAinput power Vac/Hz 230/50
output power accessoriesVac 24Vdc 24
max motor power W 150max working time sec 240max pause time sec 0 - 900obstacle detection yesGENERIC DATAprotection degree IP -dimensions (L - D - H) mm 120 - 90 - 30operating temperature °C -20 + 55
MODELS
CODE DESCRIPTION PRICE
CT10224 For one motor for sliding gate, overhead door or electromechanical barrier, 24 Vdc, with electronic clutch and slowdown in opening and closing. Built-in receiver € 205,00
CT102 2424 Vdc CONTROL UNIT
117
MODELS
CODE DESCRIPTION PRICE
CT20224 For two motors for swing gate, 24 Vdc, with electronic clutch and slowdown in opening and closing. Built-in receiver. In box € 344,00
CT20224E For two motors with encoder for swing gate, 24 Vdc, with electronic clutch and slowdown in opening and closing. Built-in receiver. In box € 369,00
Same programming logic for all control boards CT102, CT202, CT102 24, CT202 24 with run inversion via software
Amperometric obstacle detection with run inversion
Standard or programmable slowdown in opening and closing
Programmable automatic partial closing
Separate OPEN-CLOSE inputs and PP - PARTIAL input
Safety edge 8,2Kohm NC / stop - photo 1 and photo 2
Inputs and safety devices LED visualization
Flashing light output fixed or flashing
LED courtesy light output
Open gate indicator or electro lock output
3 digits display
Optional photo test
Optional test for safety edge
Built-in receiver
Possibility to memorize up to 150 codes
PLUS
CT20224 CT20224EELECTRICAL DATAinput power Vac/Hz 230/50-60 230/50-60
output power accessoriesVac 24 24Vdc 24 24
max motor power W 200 280max working time sec 240 240max pause time sec 0 - 900 0 - 900obstacle detection yes yesencoder support no yesGENERIC DATAprotection degree IP 54 54 dimensions (L - D - H) mm 222 - 110 - 275 222 - 110 - 275operating temperature °C -20 + 55 -20 + 55
CT202 2424 Vdc CONTROL UNIT
118
Same programming logic for all control boards CT102, CT202, CT102 24, CT202 24 with run inversion via software
Amperometric obstacle detection with run inversion
Standard or programmable slowdown in opening and closing
Programmable automatic partial closing
Separate OPEN - CLOSE inputs and PP - PARTIAL input
Safety edge 8,2Kohm NC - STOP - photo 1 and photo 2
Inputs and safety devices LED visualization
Flashing light output fixed or flashing
LED courtesy light or open gate indicator output
3 digits display
Optional photo test
Optional test for safety edge
New plug-in radio receiver 4 channels RX4Y
PLUS
CT102BELECTRICAL DATAinput power Vac/Hz 230/50output power accessories Vdc 24max motor power W 700max working time sec adjustablemax pause time sec 0 - 900obstacle detection yesGENERIC DATAprotection degree IP -dimensions (L - D - H) mm 120 - 90 - 30operating temperature °C -20 + 55
CT102B230 Vac CONTROL UNIT
MODELS
CODE DESCRIPTION PRICE
CT102B For one motor for sliding gate, overhead door, 230 Vac, with electronic clutch and connector for receiver, slowdown in opening and closing € 190,00
119
Same programming logic for all control boards CT102, CT202, CT102 24, CT202 24 with run inversion via software
Amperometric obstacle detection with run inversion
Standard or programmable slowdown in opening and closing
Programmable automatic partial closing
Separate OPEN - CLOSE inputs and PP - PARTIAL input
Safety edge 8,2Kohm NC - STOP - photo 1 and photo 2
Inputs and safety devices LED visualization
Flashing light output fixed or flashing
LED courtesy light or open gate indicator output
Programmable electro lock timing
Pressure control for hydraulic motors
3 digits display
Optional photo test
Optional test for safety edge
New plug-in radio receiver 4 channels RX4Y
PLUS
CT202230 Vac CONTROL UNIT
CT202ELECTRICAL DATAinput power Vac/Hz 230/50
output power accessoriesVac 24Vdc 24
max motor power W 700+700max working time sec adjustablemax pause time sec 0 - 900obstacle detection yesGENERIC DATAprotection degree IP 54 dimensions (L - D - H) mm 222 - 110 - 275operating temperature °C -20 + 55
MODELS
CODE DESCRIPTION PRICE
CT202 For two motors for swing gate, 230 Vac, with electronic clutch and connector for receiver, slowdown in opening and closing € 328,00
120
RX2H TX2B
RX2H/TX2B2-CHANNEL MINIATURIZED RECEIVER / RECESSED TRANSMITTER 2 CHANNELS
RX2H
For the control of 230Vac/110Vac main voltage loads with power up to 1000W and 2 independent channels
Easy programming with led and buzzer
Memorize up to 30 transmitters
Internal connection plug
Manage two-time sensors for automatic switch-off
Maximum flexibility in the single control of two outputs with different modes: mono-stable, bi-stable, temporized (RX2L), motor control
Possibility to combine with wired control points for lighting
TX2B
Recessed transmitter 2 channels
Lithium battery CR2032
Suitable for the main flush mounting boxes
* The estimated range has to be considered as purely indicative, since the reception is susceptible to interference due to other nearby devices operating at the same frequency as well as to the nature and disposition of any obstacles interposed between transmitter and receiver
PLUS
RX2H TX2BELECTRICAL DATAreception frequency MHz 433,92 433,92power RX2H Vac 230 -power TX2B - CR2032
range m 20 (indoor use) – 150 (outdoor use)* -
relay contacts max supply A 5 (Cos φ=1) resistive load -relay contacts max voltage W 1100 -transmission power dBm - +5GENERIC DATAprotection degree IP 20 20dimensions (L - D - H) mm 42 - 21 - 36 42 - 21 - 36operating temperature °C -20 + 55 -20 + 55
MODELS
CODE DESCRIPTION PRICE
RX2H 2-channel miniaturized receiver for radio and wired control of motors for awnings and shutters and lights € 113,00
TX2B Recessed transmitter 2 channels € 52,00
121
More intuitive programming thanks to 3-colour LEDs, dip-switches and trimmers
Possibility of cancelling one transmitter at a time
Possibility of storing transmitters of the SUB-F series
Motor torque adjustable via a trimmer
CT1RS230 Vac CONTROL UNIT
Courtesy time adjustable via a trimmer
Safety test function
Maximum motor power 700 W
Flash light maximum output power 60 W
Accessories power 3.6 W
PLUS
MODELS
CODE DESCRIPTION PRICE
CT1RS For one motor for rolling shutter or sliding gate, 230 Vac, with electronic clutch, limit switch and receiver.In box € 125,00
CT1RSELECTRICAL DATAInput power Vac/Hz 230/50Output power accessories Vdc 24 not stabilizedMaximum current of external devices on 24 Vdc mA 150Consumption W 2Max motor power W 700Maximum output power courtesy light W 60230 Vac output protection Quick 5A fuse (F1)GENERIC DATAIntegrated receiver capability 250 codesIntegrated receiver frequency MHz 433,92Protection degree IP 54Dimensions (L - D - H) mm 123 - 90 - 40Operating temperature °C -20 + 55
122
CT-400400 Vac CONTROL UNIT
For industrial motors
Suitable for intensive and long-lasting use
Compatible with receivers RXM23Y, RXM-44R
Electronic obstacle detection with amperometric control
Equipped with internal brake and with function for external brake activation
Closing after transit function
MODELS
Separate OPEN-STOP-CLOSE-PP-PARTIAL inputs
Programmable safety edge parameter
Open gate indicator output
Photo test function
Compatible both with monophasic 230V or three-phase 400V/230V motors
CODE DESCRIPTION PRICE
CT-400 For one motor for sliding gate or industrial sectional door 400 Vac / 230 Vac motor and electronic clutch.In box € 544,00
PLUS
CT-400ELECTRICAL DATApower Vac/Hz 400-230/50output power accessories Vac 24max motor power W 1500max working time sec 0 - 120max pause time sec 0 - 120obstacle detection -GENERIC DATAprotection degree IP 54dimensions (L - D - H) mm 222 - 110 - 275operating temperature °C -20 + 55
123
RX4Y4 channels plug-in
receiver
RXM23YUniversal receiver 2
channels, fix or rolling code
BOXKEYPlastic box for two motors
control unit
BOXKEYSPlastic box for one motor
control unit
PC 1 € 57,00 PC 1 € 75,00 PC 1 € 26,00 PC 1 € 20,00
KBPBattery back-up kit
KITFIXBATTFixing brackets for
batteries
PC 1 € 118,00 PC 1 € 14,00
ACCESSORIES
ACCESSORIES 24 Vdc
124
CT10224 HALO 14A CT20224 CT1RS CT102B CT202 CT-2 CT400 CT401
24 Vdc 230 Vac 400 Vac
1 2 1 2 1
• • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • • •
• • • • • • • • •
• • • • • • • • •
• • • • • •
• • • •
• • • • • • •
• • • • • • • •
• • • • • •
• • • •
• • • •
• • • • • • •
• • • • • • • • • •
• • • • • • • • •
24 Vdc 230 Vac 400 Vac
1 2 1 2 1
• • •
•
•
•
•
•
• •
•
•
•
motor power
motors number
hold to run
semi-automatic functioning
automatic functioning
condominium function (only open)
pre-flashing
photo during opening
soft start
soft stop
courtesy light
open gate light with proportional flashing light
slowdown function
water hammering
electric limit switch exclusion
temporary pause in opening
step by step function (open-stop-close-stop)
separate open and close
motor power
motors number/light
14A
CT102 24
CT202 24
CT102
CT202
CT-2
RX2M/RX2L
CT1RD
CT-400
GARDEN BOX
LIGHT LIGHT
PROGRAMMABLE FUNCTIONS
125
CT10224 HALO 14A CT20224 CT1RS CT102B CT202 CT-2 CT400 CT401
24 Vdc 230 Vac 400 Vac
•
• • • • • • • • • •
• • • •
• • • •
• • • • • •
• • • • • •
• • •
• • • • • • • •
• • • • • • • • • •
• • • • •
• • •
• • • • • •
• • • • • • • •
• • • • • • • •
• • •
motor power
working time extension
pause time with presence de-tector
1st motor delay during opening
brake
cycles counter
display
encoder
close after passage
partial opening
electro-lock
energy saving
black-out settings
safety edge connection
obstacle detection
solar power supply
126
M1
POWER SUPPLY 24 Vac
BATTERY CHARGER
KUBEDYL
PHO
TOTE
ST
IND
ICAT
OR
ENCODERM1
TWIL
IGH
T SE
NSO
R
OU
TPU
T LE
D
FLAS
HIN
G L
IGH
T
STO
P
OPE
N
PHO
TOC
ELL
1
PHO
TOC
ELL2
CLO
SE
PAR
TIAL
STEP
BY
STEP
CO
MM
ON
CO
MM
ON
SAFE
TY E
DG
E
AER
IAL
ELEC
TRIC
LO
CK
LIM
IT S
WIT
CH
MO
TOR
M1
M2ENCODERM2
LIM
IT S
WIT
CH
MO
TOR
M2
+ - -+
NEG
ATIV
E
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
6 7 8 9 10 11 12 1813 14 15 16 17 20 21
2627
19 22 24 2523
M
PHO
TOTE
ST
FLAS
HIN
G L
IGH
T
OU
TPU
T 24
Vac
STO
P
STO
P
OPE
N
PHO
TOC
ELL
1
PHO
TOC
ELL2
CLO
SEPA
RTI
AL
STEP
BY
STEP
CO
MM
ON
CO
MM
ON
CO
MM
ON
IND
ICAT
OR
OU
TPU
T LE
D
AERIAL
LIM
IT S
WIT
CH
LIM
IT S
WIT
CH
NEG
ATIV
E
ENCODER
POW
ER S
UPP
LY24
Vac
1
23
45
BATTERY CHARGER
2021
PHO
TOTE
ST
FLAS
HIN
G L
IGH
T
STO
P
STO
P
OPE
N
PHO
TOC
ELL
1
PHO
TOC
ELL2
CLO
SEPA
RTI
AL
STEP
BY
STEP
CO
MM
ON
CO
MM
ON
IND
ICAT
OR
/EL.
LOC
K
OU
TPU
T LE
D
AERIAL
NEG
ATIV
E
M1+
M1-
M2+
M2-
OU
TPU
T 24
Vac
POWER SUPPLY24Vac
BATTERY CHARGER
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
14A
CT20224
HALO
CT10224
CT20224E
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
2021
PHO
TOTE
ST
FLAS
HIN
G L
IGH
T
STO
P
STO
P
OPE
N
PHO
TOC
ELL
1
PHO
TOC
ELL2
CLO
SEPA
RTI
AL
STEP
BY
STEP
CO
MM
ON
CO
MM
ON
IND
ICAT
OR
/EL.
LOC
K
OU
TPU
T LE
D
AERIAL
NEG
ATIV
E+
V+
ENC
M1
ENC
M2
NEG
ATIV
E
-
OU
TPU
T 24
Vac
POWER SUPPLY24Vac
BATTERY CHARGER
M2+ -
M1
1213
1 2 3 4 5 6 7 8 9 10 11
CO
MM
ONPH
FLAS
HIN
G L
IGH
T
CO
MM
ON
OU
TPU
T LE
D
PHO
TOTE
ST
NEG
ATIV
E
STO
P
STEP
BY
STEP
SAFE
TY E
DG
E
SAFE
TY E
DG
E
AERIAL
BATT
ERY
CH
ARG
ER
KEBE
DYL
CONTROL UNITS ELECTRIC DIAGRAMS
127
1 2 3 4 5 6 7 8 9 10 11 12 1813 14 15 16 17
CO
UR
TESY
LIG
HT
FLAS
HIN
G L
IGH
T
M
CO
MM
ON
POW
ER S
UPP
LY23
0 VA
C
OU
TPU
T 24
Vdc
PHO
TOTE
ST
STO
PO
PEN
PHO
TOC
ELL
1
PHO
TOC
ELL
2
CLO
SE
PAR
TIAL
STEP
BY
STEP
CO
MM
ON
SAFE
TY E
DG
E
AERIAL
CO
MM
ON
LIM
IT S
WIT
CH
LIM
IT S
WIT
CH
CT102B
1 2 3 4 5 6 7 8 9 10 11 12 18 19 20 21 2213 14 17 23 24 25 26 27 28 29 30 31
CO
UR
TESY
LIG
HT
FLAS
HIN
G L
IGH
T
M1
32 33
POW
ER S
UPP
LY23
0 Va
c
OU
TPU
T 24
Vac
OU
TPU
T 24
VdcM2
EL. L
OC
K
PHO
TOTE
ST
STO
P
OPE
N
PHO
TOC
ELL
1
PHO
TOC
ELL
2
CLO
SE
PAR
TIAL
STEP
BY
STEP
CO
MM
ON
SAFE
TY E
DG
E
AER
IAL
OU
TPU
T 24
Vac
CO
MM
ON
STO
P
PH
OTO
OP
EN
CLO
SE
STA
RT
PE
DE
STR
IAN
SA
FETY
ED
GE
16
1 2 3 4 5 6 7 17 18 19 20 21 22 23 24 25
FTS
FTS
24V
24V
CO
M
CO
M
GND
ANT
11 128 9 1510 13
PH
OTO
TES
T
LIG
HT
SE
LEC
TIO
NP
OW
ER
SU
PP
LY38
0/23
0 V
ac
PO
WE
R S
UP
PLY
380/
230
Vac
FLA
SH
ING
LIG
HT/
BR
AK
E
M
26
27 AERIAL
LIM
IT S
WIT
CH
OP
EN
ING
LIM
IT S
WIT
CH
O
PE
NIN
G
POW
ER S
UPP
LY23
0VA
C
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
CO
MM
ON
FLA
SH
ING
LIG
HT
230V
AC
PHO
TOTE
ST
(PO
SIT
IVE)
24V
dc
NEG
ATI
VE
PHO
TOC
ELL
STO
P
CO
MM
ON
OPE
N
CLO
SE
STE
P B
Y S
TEP
CO
MM
ON
AER
IAL
MCT202
CT1RS CT-400
128
14AB2 114
14AB2F 114
480RM6Z12 79
520STAF029A00 61
520STAF032A00 21
550CABL045A00 21
999KRAYD 21
999KREVOD 31
999KSUND 47
ACSW002A00 91
AD 86
ADFB 21
ADRB 21
ADUN 41
ADWA 21
ALT324KF 84
ALT424K 84
ALT624K 84
ANG 112
ANTS-433 106
APFX 86
APM 86
AS-SNO3 86
AST3F 86
ASTL4 86
ASTL4J 86
ASTL5 86
ASTL6 86
ASTL6J 86
ASTL8 86
BAT-3 107
BC 65
BD 65
BDNS 65
BMET 110
BOC 65
BOX250 114
BOXKEY 123
BOXKEYS 123
BS-50 64
BS52 64
BS5224 64
CARD 109
CF3 41
CF3SB 41
CH-101 111
CH-51 11
CI3 41
COMB12 112
COMB18 112
COMRX 113
COMSC16 112
COMSC20 112
COMSC25 112
COMTX 113
CP-BR 86
CP-BR6 86
CREM-12 47
CREM-30 79
CREM-8 47
RN800 47
CT10224 116
CT102B 118
CT1RS 121
CT202 119
CT20224 117
CT-400 122
CTLIGHT2 86
DECSEL-T 110
DYL 115
ECLIPSE 105
ELS-C 21
EXRB 21
FC-PS 73
FCRAY 21
FT23 107
FT33 107
FT43 107
FT42B 107
GIUN 112
HA12 60
HA12E 60
HA12PP 62
HA12SS 62
HA8 60
HA8PP 62
HA8SS 62
HAL1 61
HAL2 61
HAL3 61
HAL4 61
HAL5 61
HAL6 61
ILSUB 99
KBP 21
KBS52PS 66
KBS5224PS 66
KC 21
KCOMW 113
KCS 47
KFE 37
KITFIXBATT 41
KLIGHT4 86
KLIGHT6 86
KLIGHT8 86
KPLAY4F 100
KPLAY4N 100
KPLAY4R 100
KRAY4224KS 25
KRAY2524EK 25
KRAY2524KK 25
KRAY3024FEK 25
KRAY3024FKK 25
KRAY4024EK 25
KRAY4024KK 25
KRAY4024R 25
KRAY42ES 25
KRAY42KS 25
KREP2024EK 35
KREP2024KK 35
KREP2224KR 35
KRING 99
KSC4224ES 56
KSC4224KS 56
KSC52ES 56
KSC52KS 56
KSC82ES 56
KSC82KS 56
KSN5024B 36
KSN50B 36
KSN52ER 36
KSN52KR 36
ALPHABETICAL LIST
CODE P. CODE P. CODE P.
129
KSTAR3224ES 28
KSTAR3224KS 28
KSUB44BR 99
KSUB44DR 99
KSUB44GR 99
KSUB44MR 99
KSUB44OR 99
KSUB44-R 99
KSUB44RR 99
KSUB44WR 99
KSUB44WS 98
KSUN11024EK 51
KSUN11024KK 51
KSUN4024EK 51
KSUN4024KK 51
KSUN4024TW 51
KSUN4224KR 52
KSUN5024FEK 51
KSUN5024FKK 51
KSUN7024EK 51
KSUN7024KK 51
KSUN7224KR 52
KUBE 97
KUBE PRO 96
KUND2ES 42
KUND2KS 42
KUND3024EK 42
KUND3024KK 42
KVIPLEDFB 61
KVIPLEDFW 61
LOOP 86
LUMY-230 106
LUMY-230E 106
LUMY-24 106
MA24 114
MUR-P 107
PF30W 104
PO24 225
PROFT 86
PROFT6 86
PROFT8 86
PS400-24FA 72
PS-400FA 72
QUADRO 61
RAB31 60
RAB3X1P 60
RAB41 60
RAB61 60
RAL31 60
RAL41 60
RAY2224 22
RAY2524 20
RAY3024F 20
RAY40 22
RAY4024E 20
REV1 31
REV2 31
REP2024 30
REP2024S 30
REP2224 32
REP2224S 32
REV3 31
RX2H 120
RX4Y 102
RXM23Y 103
RXM-44R 103
SB3 41
SBCO 61
SBLEXT 37
SBLST 61
SC162 47
SC202MHD 78
SC252M 78
SC400M 80
SC4224 54
SC52 54
SC82 54
SC-EF 79
EGS1 110
EGKTR1 108
EGKTB1 108
EGKTB2 108
SKIRT2 86
SN-50 36
SN-50-24 36
SOLEAU 104
ST-1800 65
STANAV 73
STAR3024 26
STPOAVS 73
SUB-44BN 98
SUB-44DN 98
SUB44F 98
SUB-44GN 98
SUB-44MN 98
SUB-44N 98
SUB-44ON 98
SUB-44R 98
SUB-44RN 98
SUB-44W 98
SUB-44WF 98
SUB-44WN 98
SUB-44WR 98
SUB-44WRT 98
SULU 106
SUN11024 46
SUN4024 46
SUN4224 48
SUN5024F 46
SUN7024 46
SUN7224 48
SW12200 90
SW12200EF 90
SW12240EFE 92
SW6200 90
SW6200EF 90
SW6240EFE 92
SW-EF 91
TAG 109
TAP 112
TO1M 101
TO1U 101
TO2M 101
TO2MP 101
TS 21
TWIN 47
TX2B 120
TZ-1500 65
TZ-2000 65
UND 40
UND10 40
UND24 40
UND3024F 40
VIP1 61
XRMAN 102
CODE P.CODE P.CODE P.
130
1. EFFECTIVENESS OF THESE GENERAL CONDISTIONS OF SALEThese general conditions of Sale will replace all previous conditions and are applicable to all orders submitted to Key Automation Srl (hereinafter referred to as Key Automation) for products carrying the Key Automation trademark. All sales of goods by Key Automation to its Customers (hereinafter referred to as Customer) shall be governed by the following General Conditions of Sale, which shall constitute an integral part of any agreement for the sale of goods between Key Automation and Customer and shall supersede and cancel any inconsistent covenant or provision contained in the order or other document issued by the Customer. Illustrations, descriptions, values tables and other materials contained in Key Automation catalogues and other printed materials are for the sole purpose of identification and may be modified by Key Automation at any time without prior notice.
2. ORDERSAny orders shall be deemed as issued “subject to availability of the goods and any alteration of the price lists”. Key Automation reserves the right to accept or reject, in whole or in part, any order submitted by the Customer, on account of their compliance with these General Conditions, and of the availability of the goods order. Key Automation reserves the right to change/modify the technical characteristics of its products at any time and without prior notice or liability. Orders placed by the customer cannot be cancelled by the Customer, either wholly or partially, after ten days of being submitted to Key Automation: if any orders are cancelled after such term, Key Automation shall be entitled to payment of the whole price.
3. PRICESThe goods shall be sold by Key Automation to Customer at the prices set out in the Key Automation price list effective at the time of delivery.The Customer shall unconditionally accept any variation of the price list made between the time of order and the time of delivery. Any new Key Automation price list cancels and substitutes the previous ones. All prices in the Key Automation catalogue are “ex-factory” and before tax.
4. DELIVERY TERMSAll goods shall be delivered “ex-factory” Key Automation S.r.l., via Meucci 30027 San Donà di Piave (Venezia).Except for different written agreement delivery terms are 10 days for National shipment and 30 days for International shipment, a part for products signed on price list with the clock on right part of paper, which have a delivery time of 6 weeks. Delivery terms start from customer acceptation of Key Automation order confirmation. In case of delay of delivery not exceed in customary allowances, the Customer shall not be entitled to claim for termination, in whole or in part, of the agreement, or to refuse to accept delivery of the goods, or to claim compensation for damages. The obbligation to deliver the goods shall be fulfilled upon delivery of the goods to the carrier. Key Automation shall be released from the obligation to deliver the goods in any event of “Act of God” or “force majeure”, such as strikes, social and political disorders, unavailability of raw materials, electrical components or other products, and any other events preventing Key Automation from delivering the goods, for which Key Automation.
5. SHIPMENTSThe goods shall be shipped on such carrier(s) as Key Automation may select, and Key Automation shall charge the relevant amount to the Customer including in the relevant invoice.The customer may agree with Key Automation at the time of order, to use a different carrier (always at the customer costs, or to collect the goods directly ex-factory Key Automation S.r.l., San Donà di Piave, Venezia. All risks shall pass to the Customer at the time of delivery. Thefts, losses, damages, shortfalls shall not release the Customer from the obligation to pay the price, if the goods have been duly delivered to the carrier at Key Automation factory. The goods shall not be covered by insurance, unless expressly required by the Customer and at Customer’s cost and risk.
6. COLLECTION OF THE GOODSThe Customer shall properly collect the goods as soon as they are put at the Customer’s disposal, and communicated to him through telephone, fax or e-mail. In case of delay, Key Automation shall be entitled to full payment of the price and reimbursement for any cost of storage and custody of the goods, saving any compensation for damages. Key Automation shall not be liable in respect of any damage resulting directly or indirectly from the storage of any goods not collected when available at the Key Automation warehouses of the carrier, forwarding agent or third parties.
7. WARRANTYOur guarantee takes effect from the date of manufacturing, put on each Key’s product and it lasts for 30 months.This warranty period is fix and imperative. It is limited exclusively to the repair or replacement free of charge of the parts recognised by Key Automation as faulty due to lack of essential qualities in the material or to errors in workmanship. Any complaints about apparent defects shall be claimed to Key Automation compulsory no later than 8 days after delivery and occult defects within 8 days from discovery. If these terms are not respected the warranty is not be valid. Complaints never allow the order reducing or cancellation from Customer, and moreover never allow Key Automation refund or compensation. All expenses related to delivery and dispatch of complained material are charged to the customer.
GENERAL TERMS OF SALE