10/1
/201
3 Bulldozer Blades
Lames Bulldozer
Cuchillas BulldozerLâminas Bulldozer
Caterpillar
Bulldozer
Bulldozer Cutting Edges
Lames Bulldozer
Cuchillas Bulldozer
Cuchillas Bullozer
Referencias en negrita producto disponible.Otras referencias.
Bold ref. number,product available.Other references.Bulldozer
BulldozerBulldozer
Esco® Style *Versión Esco ®DRP
Manufactured names description part numbers are for reference purposes only and are not that of the respective manufactures
Cuchillas, Cantoneras y SobrecantonerasCutting Edges, Router Bits and Grader OverlayLames, Coins et Protector de CoinsCuchillas, Cantoneiras e Sobre Cantoneiras
CantonerasRouter BitsCoinsCantoneiras
Cuchillas CentralesCenter BladesLames Central Lâminas Centrais
Cuchillas LateralesLateral BladesLames Lâminas Laterais
10/1
/201
3 Bulldozer Blades
Lames Bulldozer
Cuchillas BulldozerLâminas Bulldozer
10/1
/201
3
STRAIGHTA good dozer blade knifefor most dozer applica-tions. Available for mostmachines.
UNIVERSALStraight blade with heavyloads over long distances.Available for larger models.
SEMI-U A small straight dozerblade with end bits, toprovide better load carringmedium to large machine.
POWER bucket and tilt angle(dump) A versatile blade. Available for D6 andsmaller machines.
CUSHIONRelatively narrow blade.Wears a brace to pushother equipment as scrapers.
ANGLEAn economical blade forlight and mediumdesigned for the D8 andsmaller machines, whichrequire an ability topush to the side.
RECTOUna buena cuchilla de usogeneral, para la mayoría deaplicaciones dozer. Disponi-ble para la mayoría de lasmáquinas.
Con ángulo de POTENCIA y bascu-lante (volquete) Una cuchilla muy versátil.Disponible para D6 ymáquinas más pequeñas.
UNIVERSALCuchilla recta con canton-eras para grandes cargas endistancias largas. Disponi-bles para modelos másgrandes.
CUSHIONCuchilla relativamente es-trecha. Lleva un refuerzopara empujar a otrasmáquinas como traillas.
ÁNGULO Una cuchilla económicapara trabajos ligeros ymedianos diseñada paraD8 y máquinas máspequeñas donde se requiere capacidad deempuje lateral.
SEMI-U Una cuchilla recta con pe-queñas cantoneras, paraproporcionar una mejorcarga de máquinas de ta-maño mediano y grande.
Dozer types Tipos de cazo
Manufactured names description part numbers are for reference purposes only and are not that of the respective manufactures
10/1
/201
3
Bulldozer Blades Cuchillas Bulldozer
Lames Bulldozer Lâminas Bulldozer
10/1
/201
3
Bulldozer Blades Cuchillas Bulldozer
Lames Bulldozer Lâminas Bulldozer
10/1
/201
3
BYG blades for Caterpillar BulldozerBYG offers cutting edges of different sections for ease ofinstallation, maintenance, handling and storage. As thesections can be replaced, or rotated individually, they aremore economical, so that each can be utilised to the maxi-mum amount of wear.
They are made of rolled steel with a high resistance tobreakage. Deep Hardened to increase wear resistance.Deep-drawn for better protection of the lag screws. Avail-able in different thicknesses to suit the work being done.
Cuchillas de BulldozerBYG ofrece cuchillas de diferentes secciones para facilitarsu instalación, mantenimiento, manipulación y almacenaje.Las cuchillas BYG pueden ser substituidas, alternadas ogiradas individualmente por esto resultan más económicas,ya que cada una de ellas puede aprovecharse hasta sumáximo desgaste.
Están fabricadas con acero laminado de gran resistencia ala rotura. Endurecidas para mayor resistencia al desgaste.Embutidas en profundidad para mayor protección de lostornillos de cabeza cuadrada. Disponibles en diferentesgrosores para utilizar la cuchilla según el trabajo a realizar.
2 main options for Caterpillar Blades BYG dispone de 2 tipos de cuchillas
General UseIMP HC Blades for general use available in differentthicknesses to suite the work being done.
Uso GeneralCuchillas de uso general en diferentes tiposde gruesos dependiendo del tipo de trabajo.
STD
Esco Style BladesFor use in high abrasion and / or high impact.They Are notably reinforce, providing greaterresistance to breakage.
*Versión cuchillas EscoPara aplicaciones en alta abrasión y/o de altoimpacto.Están notablemente reforzadas, proporcionandouna mayor resistencia a la rotura.
Esco Style
STD
*Versión Esco DRP
Perfil standard
Perfil fundido tipo EscoProfile type Cast Esco
Standard Profile
Manufactured names description part numbers are for reference purposes only and are not that of the respective manufactures
10/1
/201
3 Bulldozer Blades
Lames Bulldozer
Cuchillas BulldozerLâminas Bulldozer
10/1
/201
3 Bulldozer Blades
Lames Bulldozer
Cuchillas BulldozerLâminas Bulldozer
CaterpillarBYG end bits for Caterpillar BulldozerAlthough each option has specific characteristics, all ver-sions have common attributes that contribute to increaseproduction and reduce operating costs.
They are made from special materials for its duration isequal to that of the blades. Deep Hardened to increasewear resistance. The thickness in the area of the screwhole is the same as that of the blade for long life andgreater protection of the screw head.
Its continuity is in the sidebar protects the tractor blade.
The thickness in the area of wear is designed to achieve arate of wear between the angle of attack and blade veryfavorable.
Cantoneras de BulldozerAunque cada opción tiene características especificas, todaslas versiones tienen unas características comunes que con-tribuyen a aumentar la producción y a reducir los costes deexplotación.
Están fabricadas con materiales especiales para que su du-ración sea igual que la de las cuchillas. Endurecidas en pro-fundidad para mayor resistencia al desgaste.
El grosor en la zona del orificio del tornillo es el mismo queel de la cuchilla para una mayor duración del sistema ymayor protección de la cabeza del tornillo. Su prolongaciónmás allá de la barra lateral del tractor protege la hoja deempuje. El espesor en la zona de desgaste está diseñadopara conseguir una proporción de desgaste entre la can-tonera y la cuchilla de ataque muy favorable.
BYG dispone de 5 tipos de cantoneras5 main options for Caterpillar Corners
UtilityUT are for normal conditions to abrasive. They have a low initial cost. FD serve for grading and finishing system.Earthmoving works. For lightly abrasivematerials.
Extra Wear LifeHigh production leveling.Debris removal.Ripping of land. For abrasive conditions.
Larga Duración Nivelación de alta producción.Retirada de escombros.Rotura de tierras.Para condiciones abrasivas.
UtilidadUT Son para desde condiciones normaleshasta abrasivas. Tienen un coste inicialbajo.FD Sirven para el sistema de nivelación yacabado. Explanación de obras. Paramateriales poco abrasivos.
EWL
UT FD
UtilityIMP HC End bits are used for movingearth and normal materials.
BLAFor use in high abrasion and /or high impact.
They Are notably reinforced inits perimeter and with a rein-forcing rib to the tip providinggreater resistance to breakage.
BLA Para aplicaciones en alta abrasióny/o de alto impacto.Están notablemente reforzadasens su perimetro y con un nervioque la refuerza hacia la punta pro-porcionando una mayor resisten-cia a la rotura.
UtilidadIMP HC Cantoneras de uso general seutilizan para el movimiento de tierra ymateriales normales
IMP HC
*Version Esco ® DRPBLA
GDGeneral ServiceFor general use. They areused for earthmoving works.Diverse material. Edge ofreinforced penetration.
GeneralUso en aplicación general.Se utilizan para elmovimiento de tierrasMaterial diverso. Extremode penetración reforzado.
Manufactured names description part numbers are for reference purposes only and are not that of the respective manufactures
*Esco ® Style
10/1
/201
3
Bulldozer Blades Cuchillas Bulldozer
Lames Bulldozer Lâminas Bulldozer
10/1
/201
3
D11D11N/R - 11S4BB, 4KB, 9NH, 1AP, 4XP
HC 8E-45439W-3675
60 GD
406 x
9W-2425
1020
45 141
406 x
9W-2426
1098
45 151
406 x
9W-2426
1098
45 151
406 x
9W-2425
1020
45 141
8E-4543 HD
UT9W-3675
8E-97854T-0605
UT
8E-4545 HD
8E-45459W-3675
9W-3675
70
60
60
70
EWL 9W-4494 60 188 9W-4495 60 202 9W-4495 60 202 9W-4494 60 188
HC 8E-45449W-3675
60
8E-4544 HD
UT9W-3675
8E-97864T-0606
UT
8E-4546 HD
8E-45469W-3675
9W-3675
70
60
60
70
UT
UT
8E-97854T-0605
8E-9749
9
60
75 EEWL*
5P-8823ø 1-1/4"3K-97704K-0684
135-9577
95P-8823ø 1-1/4"3K-97704K-0684
75 234 135-9578
9
75 252
5P-8823ø 1-1/4"3K-97704K-0684
135-9578
95P-8823ø 1-1/4"3K-97704K-0684
75 252 135-9577
9
75 234
5P-8823ø 1-1/4"3K-97704K-0684
UT
UT
8E-97864T-0606
8E-9748
9
60
75
5P-8823ø 1-1/4"3K-97704K-0684
Machine modelModelo máquina
How to use this catalogue Cómo utilizar este catálogo
DozertypeTipocazo
Machine model tipeModelo y tipo máquina
Dozer model typeModelo y tipo cazo
BucketseriesSerie cazo
Right corneroptionsOpcionescantonerasderecha
Left corneroptionsOpcionescantonerasizquierdas
BladeoptionsOpcionescuchilla
Manufactured names description part numbers are for reference purposes only and are not that of the respective manufactures
10/1
/201
3
D11 N/R - 11SU4BB, 4KB, 9NH, 1AP, 4XP, 8PP
Caterpillar D11, D10
D11 - 11U4CB, 5TB, 9MH, 9ZH, 4YP, 8RP
D10 N/R/S - 10SU (Semi-U)1RH, 7RH, 4KP, 6EP, BHJ, BHA
*Version Esco® DRP
432 x17,0"
102140,2"
432 x17,0"
109943,3"
432 x17,0"
109943,3"
432x17,0"
102140,2"
HD
EWL
BLA6256R
8E-4545
753,0"
602,4"
207456
HD
181399
EWL
BLA6259HHDA
9W-4494
823,2"
188414
602,4"
168370
BLA6257HHDA
9W-4495
823,2"
197434
602,4"
188414
BLA6257HHDA
9W-4495
823,2"
197434
602,4"
188414
BLA6259HHDA
9W-4494
823,2"
188414
602,4"
168370
95P-8823ø 1-1/4"3K-97704K-0684
95P-8823ø 1-1/4"3K-97704K-0684
95P-8823ø 1-1/4"3K-97704K-0684
95P-8823ø 1-1/4"3K-97704K-0684
95P-8823ø 1-1/4"3K-97704K-0684
HD BLA6256L
EWL 8E-4546
753,0"
207456
602,4"
181399
95P-8823ø 1-1/4"3K-97704K-0684
406 x16,0"
85933,8"
406 x16,0"
99239,1"
406 x16,0"
99239,1"
406x16,0"
85933,8"
HD
EWL
BLA6211RB
8E-4541
522,0"
602,4"
111245
HD
122269
EWL
BLA6227HHD
8E-2086
502,0"
110243
602,4"
144317
BLA 6226HHD
8E-2085
502,0"
111245
602,4"
181399
BLA 6226HHD
8E-2085
502,0"
111245
602,4"
181399
BLA 6227HHD
8E-2086
502,0"
110243
602,4"
144317
75P-8823ø 1-1/4"3K-97704K-0684
55P-8823ø 1-1/4"3K-97704K-0684
65P-8823ø 1-1/4"3K-97704K-0684
65P-8823ø 1-1/4"3K-97704K-0684
55P-8823ø 1-1/4"3K-97704K-0684
HD BLA6211LB
EWL 8E-4542
522,0"
111245
602,4"
122269
75P-8823ø 1-1/4"3K-97704K-0684
432 x17,0"
102140,2"
432 x17,0"
102240,2"
432 x17,0"
109943,3"
432 x17,0"
102240,2"
HD
EWL
BLA6256R
8E-4545
753,0"
602,4"
207456
HD
181399
EWL
BLA6259HHDA
9W-4494
823,2"
188414
602,4"
168370
BLA6258HHDA
9W-4493
823,2"
180397
602,4"
176388
BLA6257HHDA
9W-4495
823,2"
197434
602,4"
188414
BLA6258HHDA
9W-4493
823,2"
180397
602,4"
176388
95P-8823ø 1-1/4"3K-97704K-0684
95P-8823ø 1-1/4"3K-97704K-0684
95P-8823ø 1-1/4"3K-97704K-0684
95P-8823ø 1-1/4"3K-97704K-0684
95P-8823ø 1-1/4"3K-97704K-0684
432x17,0"
102140,2"
BLA6259HHDA
9W-4494
803,1"
188414
602,4"
168370
HD
EWL
95P-8823ø 1-1/4"3K-97704K-0684
BLA6256L
8E-4546
753,0"
602,4"
207456
181399
95P-8823ø 1-1/4"3K-97704K-0684
Manufactured names description part numbers are for reference purposes only and are not that of the respective manufactures
Bulldozer Blades
Lames Bulldozer
Cuchillas BulldozerLâminas Bulldozer
10/1
/201
3
Bulldozer Blades Cuchillas Bulldozer
Lames Bulldozer Lâminas Bulldozer
406 x16,0"
85933,8"
406 x16,0"
85133,5"
406 x16,0"
85133,5"
406 x16,0"
85133,5"
HD BLA6211RB
EWL 8E-4541
522,0"
602,4"
111245
HD BLA
122269
EWL
6227HHD
9W-6657
371,5"
110243
451,8"
111245
BLA6248HHD
9W-6658
502,0"
130287
451,8"
113249
BLA6248HHD
9W-6658
502,0"
130287
451,8"
113249
BLA6248HHD
9W-6658
502,0"
130287
451,8"
113249
75P-8823
ø 1-1/4"3K-97704K-0684
55P-8823ø 1-1/4"3K-97704K-0684
55P-8823ø 1-1/4"3K-97704K-0684
55P-8823ø 1-1/4"3K-97704K-0684
55P-8823ø 1-1/4"3K-97704K-0684
406 x16,0"
85933,8"
BLA6227HHD
9W-6657
371,5"
110243
451,8"
111245
HDBLA 6211LB
EWL 8E-4542
55P-8823ø 1-1/4"3K-97704K-0684
7
522,0"
111245
602,4"
122269
5P-8361ø 1-1/4"3K-97704K-0684
D10 N/R- 10U (Universal)1SH, 7WH, 4LP, 6FP, BHF, BHP
Caterpillar D10, D9 *Version Esco® DRP
330 x13,0"
80331,6"
330 x13,0"
178770,4"
330 x13,0"
80331,6"
HD
EWL
BLA6159UR
8E-4539
431,7"
502,0"
75165
HD
77170
BLA6201HHD
EWL122-2471
471,9"
74163
451,8"
83183
BLA6225HHD
9W-7043
451,8"
85187
451,8"
190419
BLA6201HHD
122-2471
471,9"
74163
451,8"
83183
HD
EWL
BLA6159UL
8E-4540
431,7"
502,0"
74J-9208ø 1"2J-35075P-8250
54J-9208ø 1"2J-35075P-8250
124J-9208ø 1"2J-35075P-8250
54J-9208ø 1"2J-35075P-8250
74J-9208ø 1"2J-35075P-8250
75165
77170
D9N - 9SU 1MH, 5BH, 1LP, 2LP, 7NH, 2ZP, 2BP, 9LH, 9RP,
CLC, CLN, CLY, CMA, T9J
D9N 9U1LH, 2ZH, 1MP, 7PH, 9PH, CMH, CMS, CMW, CMZ, T9H
HD BLA6159UR 43 75 HD
33013,0"
x
BLA6201HHD
80331,6"
45 74
33013,0"
x
BLA6224 HHD
226489,1"
45 108
33013,0"
x
BLA6201HHD
80331,6"
45 74 HD BLA6159UL 43
EWL 8E-4539
7
1,7"
502,0"
165
77 EWL3,0"
ø 1"2J-35075P-8250
112-2471
4J-92085 ø 1"
2J-35075P-8250
1,8"
45
163
831,8" 183
9W-7043
154J-9208
1,8"
45
238
1901,8" 419
ø 1"2J-35075P-8250
112-2471
4J-92085 ø 1"
2J-35075P-8250
1,8"
45
163
831,8" 183
EWL 8E-4540
1,7"
502,0"
2,0"
7 ø 1"2J-35075P-8250
75165
773,0"
170
Manufactured names description part numbers are for reference purposes only and are not that of the respective manufactures
10/1
/201
3 Bulldozer Blades
Lames Bulldozer
Cuchillas BulldozerLâminas Bulldozer
D8N 8SU1JH, 2WP, 6AH, 9CH
330 x13,0"
82432,4"
330 x13,0"
90035,4"
330 x13,0"
90035,4"
330x13,0"
82432,4"
HD BLA6159 UR
EWL 8E-4537
431,7"
401,6"
75165
HD
59130
BLA6223HHD
EWL 112-2473
451,8"
77170
451,8"
85187
BLA6222HHD
112-2475
451,8"
86190
451,8"
96212
BLA6222HHD
112-2475
451,8"
86190
451,8"
96212
BLA6223HHD
112-2473
451,8"
77170
451,8"
85187
74F-4042ø 1"2J-35075P-8250
55P-8823ø 1"3K-97704K-0684
65P-8823ø 1"3K-97704K-0684
65P-8823ø 1"3K-97704K-0684
55P-8823ø 1"3K-97704K-0684
HD BLA6159 UL
EWL 8E-4538
431,7"
75165
401,6"
59130
74F-4042ø 1"2J-35075P-8250
Caterpillar D8
*Version Esco® DRP
Manufactured names description part numbers are for reference purposes only and are not that of the respective manufactures