Cable Tray
Cable Management Solutions B.V.
E-STRUT BV | Postbus 10025 | 3004 AA Rotterdam | The NetherlandsT: +31 (0)10 522 33 51 | F: +31 (0)10 521 49 [email protected] | www.eurostrut.com
Support Systems & Solutions B.V.Support Systems & Solutions B.V. Cable Management Solutions B.V.
6
81
33
Cable tray systemsCable tray systems
Cable tray systems
The comprehensive Metsec cable tray rangeconsists of three systems ranging from the lightduty non-return flange cable tray to twosystems with cable-friendly return flange trays,medium duty 25mm deep and heavy duty50mm deep.
The unique perforation pattern allows ease ofattachment of cables with more than adequateventilation. The side walls of the medium andheavy duty ranges are also slotted as standard.
Light duty cable trays are available in widths of50, 75, 100, 150, 225 and 300mm. Medium dutytrays are available in widths of 50, 75, 100,150,225, 300, 450 and 600mm. Heavy duty trays areavailable in widths of 75, 100, 150, 225, 300,450, 600, 750 and 900mm wide.
Each type of tray is a total system with a wideselection of support accessories to providecomprehensive site installation solutions.
Loading graphsSafe working loads are represented graphically as shownand are based on the cable tray being continuous overfour spans or more. Deflection has been limited toSPAN/200 generally, based on the end span condition asthe worst case. Deflection will be less than this on internalspans. However, on wider trays, additional deflection willbe induced locally across the base of the tray, dependingon the width of the tray and the load distribution acrossthe width. This will not be detrimental to the structuralperformance of the tray but may need consideration ifappearance is of prime importance.
Bespoke systemsIn addition to standard cable tray systems, Metsec has theability to manufacture non standard cable tray systems toorder.
Due to sophisticated equipment and software, prototypescan be produced quickly for sample approval.
It is important for customers to issue the complete order atthe outset to allow full use of materials and avoidexpensive waste.
Metsec cable trays are manufactured onsophisticated CNC equipment in a world classmanufacturing cell engaging a high level ofautomation for fast moving items.This allows Metsec to maintain a very high level of on time in full delivery performance.
Comprehensive stocks of cable trays andaccessories in both pre-galvanised and post hotdip galvanised finish are carried at all times toensure timely delivery.
Development and testingMetsec cable tray systems have been fullytested to develop accurate loading graphs.Further verification tests have also been doneunder the requirements of BS EN 61537:2007 –Cable management – cable tray systems andcable ladder systems. These tests includeimpact resistance, marking, connection of re-usable components, safe working load tests,electrical continuity, and performance of steel atextreme temperature ranges.
Metsec cable tray systems have been developedafter significant consultation with major installers.This ensures the systems meet and surpass keyrequirements providing innovative and costeffective solutions in an increasingly demandingmarket
SPAN m
SPAN m
180
140
160
120
100
80
60
40
20
0
140
160
120
100
80
60
40
20
0
300
250
200
150
100
50
0
2.25 2.51.5 1.75 2
SPAN m 1.75 21 1.25 1.5
0.5 0.75 1 1.25 1.5
300/600 wide150/225 wide50/100 wide
450/600 wide225/300 wide75/150 wide
300/450 wide50/225 wide
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.S
AFE
WO
RK
ING
LO
AD
kg.
per
m.
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.
Return flange - medium duty
SPAN m
SPAN m
180
140
160
120
100
80
60
40
20
0
140
160
120
100
80
60
40
20
0
300
250
200
150
100
50
0
2.25 2.51.5 1.75 2
SPAN m 1.75 21 1.25 1.5
0.5 0.75 1 1.25 1.5
300/600 wide150/225 wide50/100 wide
450/600 wide225/300 wide75/150 wide
300/450 wide50/225 wide
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.S
AFE
WO
RK
ING
LO
AD
kg.
per
m.
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.
Return flange - heavy duty
SPAN m
SPAN m
180
140
160
120
100
80
60
40
20
0
140
160
120
100
80
60
40
20
0
300
250
200
150
100
50
0
2.25 2.51.5 1.75 2
SPAN m 1.75 21 1.25 1.5
0.5 0.75 1 1.25 1.5
300/600 wide150/225 wide50/100 wide
450/600 wide225/300 wide75/150 wide
300/450 wide50/225 wide
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.S
AFE
WO
RK
ING
LO
AD
kg.
per
m.
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.
Non-return flange - light duty
82
33
Cable tray systemsCable tray systems
Cable tray systems
32
The comprehensive Metsec cable tray rangeconsists of three systems ranging from the lightduty non-return flange cable tray to twosystems with cable-friendly return flange trays,medium duty 25mm deep and heavy duty50mm deep.
The unique perforation pattern allows ease ofattachment of cables with more than adequateventilation. The side walls of the medium andheavy duty ranges are also slotted as standard.
Light duty cable trays are available in widths of50, 75, 100, 150, 225 and 300mm. Medium dutytrays are available in widths of 50, 75, 100,150,225, 300, 450 and 600mm. Heavy duty trays areavailable in widths of 75, 100, 150, 225, 300,450, 600, 750 and 900mm wide.
Each type of tray is a total system with a wideselection of support accessories to providecomprehensive site installation solutions.
Loading graphsSafe working loads are represented graphically as shownand are based on the cable tray being continuous overfour spans or more. Deflection has been limited toSPAN/200 generally, based on the end span condition asthe worst case. Deflection will be less than this on internalspans. However, on wider trays, additional deflection willbe induced locally across the base of the tray, dependingon the width of the tray and the load distribution acrossthe width. This will not be detrimental to the structuralperformance of the tray but may need consideration ifappearance is of prime importance.
Bespoke systemsIn addition to standard cable tray systems, Metsec has theability to manufacture non standard cable tray systems toorder.
Due to sophisticated equipment and software, prototypescan be produced quickly for sample approval.
It is important for customers to issue the complete order atthe outset to allow full use of materials and avoidexpensive waste.
Metsec cable trays are manufactured onsophisticated CNC equipment in a world classmanufacturing cell engaging a high level ofautomation for fast moving items.This allows Metsec to maintain a very high level of on time in full delivery performance.
Comprehensive stocks of cable trays andaccessories in both pre-galvanised and post hotdip galvanised finish are carried at all times toensure timely delivery.
Development and testingMetsec cable tray systems have been fullytested to develop accurate loading graphs.Further verification tests have also been doneunder the requirements of BS EN 61537:2007 –Cable management – cable tray systems andcable ladder systems. These tests includeimpact resistance, marking, connection of re-usable components, safe working load tests,electrical continuity, and performance of steel atextreme temperature ranges.
Metsec cable tray systems have been developedafter significant consultation with major installers.This ensures the systems meet and surpass keyrequirements providing innovative and costeffective solutions in an increasingly demandingmarket
SPAN m
SPAN m
180
140
160
120
100
80
60
40
20
0
140
160
120
100
80
60
40
20
0
300
250
200
150
100
50
0
2.25 2.51.5 1.75 2
SPAN m 1.75 21 1.25 1.5
0.5 0.75 1 1.25 1.5
300/600 wide150/225 wide50/100 wide
450/600 wide225/300 wide75/150 wide
300/450 wide50/225 wide
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.S
AFE
WO
RK
ING
LO
AD
kg.
per
m.
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.
Return flange - medium duty
SPAN m
SPAN m
180
140
160
120
100
80
60
40
20
0
140
160
120
100
80
60
40
20
0
300
250
200
150
100
50
0
2.25 2.51.5 1.75 2
SPAN m 1.75 21 1.25 1.5
0.5 0.75 1 1.25 1.5
300/600 wide150/225 wide50/100 wide
450/600 wide225/300 wide75/150 wide
300/450 wide50/225 wide
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.S
AFE
WO
RK
ING
LO
AD
kg.
per
m.
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.
Return flange - heavy duty
SPAN m
SPAN m
180
140
160
120
100
80
60
40
20
0
140
160
120
100
80
60
40
20
0
300
250
200
150
100
50
0
2.25 2.51.5 1.75 2
SPAN m 1.75 21 1.25 1.5
0.5 0.75 1 1.25 1.5
300/600 wide150/225 wide50/100 wide
450/600 wide225/300 wide75/150 wide
300/450 wide50/225 wide
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.S
AFE
WO
RK
ING
LO
AD
kg.
per
m.
SA
FE W
OR
KIN
G L
OA
D k
g.p
er m
.
Non-return flange - light duty
83
35
Cable tray systemsSystem configuration and supportMetsec cable trays are designed as a completesystem with simple accessories. Integralconnectors are included for bends tees etc. forall cable tray ranges.
When installing Metsec cable trays care shouldbe taken to ensure accessories
Technical construction detailsMedium and heavy duty cable traysystems have cable-friendly returnflanges that are also slotted for allwidths as standard. The uniqueperforation pattern in the base of thecable trays allows ease of attachmentfor cables with more than adequateventilation. All Metsec cable trayranges have the same plan footprintthat facilitates the set out of cable runsprior to finalisation of design.
DB illus here
Widths 50 to 225
12
Width 300
18
Widths 50 to 600
25
Widths 75 to 900
50
Widths 50 to 225
12
Width 300
18
Widths 50 to 600
25
Widths 75 to 900
50
Widths 50 to 225
12
Width 300
18
Widths 50 to 600
25
Widths 75 to 900
50
39.0
8.0
15.0
15.039.0
8.0
8.0
Equal tee
Straight length
Internal riser
90° flat bend
Straight reducer
90° flat bend
45° flat bend
Straight length
Straight length
Straight length
Straight length
External riser
Crossover
Cable tray systemsCable tray systems
Materials and finishesMaterials and finishes available aremild steel pre-galvanised as standard,mild steel hot dip galvanised aftermanfacture and stainless steel grade316L to order.
Mild steel pre galvanised:manufactured from steel complyingwith BS EN 10346 2009.Mild steel hot dip galvanised:manufactured from steel complyingwith BS EN 10130:2006 and hot dipgalvanised after manufacture to BS EN 1461:2009.
Stainless steel: manufactured fromstainless steel grade 316L complyingwith BS EN 10088-2:2005.
Light duty
Medium duty
Heavy duty
(e.g. bends, tees, crossovers etc.) have adequatesupport with additional supports for largercomponents. Light duty cable tray straightshave one end swaged for easy connection to thenext tray. When light duty straight trays are cutto smaller lengths on site connection to the nexttray requires a fishplate.
84
Cable tray systems
34
System configuration and supportMetsec cable trays are designed as a completesystem with simple accessories. Integralconnectors are included for bends tees etc. forall cable tray ranges.
When installing Metsec cable trays care shouldbe taken to ensure accessories
Technical construction detailsMedium and heavy duty cable traysystems have cable-friendly returnflanges that are also slotted for allwidths as standard. The uniqueperforation pattern in the base of thecable trays allows ease of attachmentfor cables with more than adequateventilation. All Metsec cable trayranges have the same plan footprintthat facilitates the set out of cable runsprior to finalisation of design.
DB illus here
Widths 50 to 225
12
Width 300
18
Widths 50 to 600
25
Widths 75 to 900
50
Widths 50 to 225
12
Width 300
18
Widths 50 to 600
25
Widths 75 to 900
50
Widths 50 to 225
12
Width 300
18
Widths 50 to 600
25
Widths 75 to 900
50
39.0
8.0
15.0
15.039.0
8.0
8.0
Equal tee
Straight length
Internal riser
90° flat bend
Straight reducer
90° flat bend
45° flat bend
Straight length
Straight length
Straight length
Straight length
External riser
Crossover
Cable tray systemsCable tray systems
Materials and finishesMaterials and finishes available aremild steel pre-galvanised as standard,mild steel hot dip galvanised aftermanfacture and stainless steel grade316L to order.
Mild steel pre galvanised:manufactured from steel complyingwith BS EN 10346 2009.Mild steel hot dip galvanised:manufactured from steel complyingwith BS EN 10130:2006 and hot dipgalvanised after manufacture to BS EN 1461:2009.
Stainless steel: manufactured fromstainless steel grade 316L complyingwith BS EN 10088-2:2005.
Light duty
Medium duty
Heavy duty
(e.g. bends, tees, crossovers etc.) have adequatesupport with additional supports for largercomponents. Light duty cable tray straightshave one end swaged for easy connection to thenext tray. When light duty straight trays are cutto smaller lengths on site connection to the nexttray requires a fishplate.
85
37
StandardsCable tray systemsCable tray systems
Metsec Cable Tray Systems generally conform to BS EN 61537:2007 Cable management - cable traysystems and cable ladder systems.
Information relating to compliance is detailed/highlightedwithin the following sections of the standard:
6 Classification6.1 According to material6.1.1 Metsec cable tray systems are metallic systemcomponents
6.2 According to resistance to flame propagation6.2.2 Metsec cable tray systems are non-flamepropagating system components
6.6 According to temperature6.6.1 Minimum temperature for the system components isgiven in Table 2.6.6.2 Maximum temperature for the system components isgiven in Table 3.
6.7 According to the free base area of the cable tray lengthas given in Table 4.
6.3 According to electrical continuity characteristics6.3.2 Metsec cable tray systems have electrical continuitycharacteristics
6.4 According to electrical conductivity6.4.1 Metsec cable tray systems are electrically conductivesystem components
6.5 According to resistance against corrosion6.5.2 Metsec cable tray systems are made of steel withmetallic finishes or stainless steel
(Resistance to corrosion is classified according to Table 1and follow the relevant specification in Table 8, withcompliance according to Table 7.)
Table 1 - classification for resistance against corrosionClass Reference - material and finish
0 (a) None
1 Electroplated to a minimum thickness of 5 µm
2 Electroplated to a minimum thickness of 12 µm
3 Pre - galvanised to grade 275 to EN 10327 and EN 10326
4 Pre - galvanised to grade 350 to EN 10346: 2009
5 Post - galvanised to a zinc mean coating thickness (minimum) of 45 µm according to ISO 1461 for zinc thickness only
6 Post - galvanised to a zinc mean coating thickness (minimum) of 55 µm according to ISO 1461 for zinc thickness only
7 Post - galvanised to a zinc mean coating thickness (minimum) of 70 µm according to ISO 1461 for zinc thickness only
8 Post - galvanised to a zinc mean coating thickness (minimum) of 85 µm according to ISO 1461 for zinc thickness only
9A Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S30400 or EN 10088 grade 1 - 4301 without a post treatment (b)
9B Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S31603 or EN 10088 grade 1 - 4404 without a post treatment (b)
9C Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S30400 or EN 10088 grade 1 - 4301 with a post treatment (b)
9D Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S31603 or EN 10088 grade 1 - 4404 with a post treatment (b)
(a) For materials which have no declared corrosion resistance classification
(b) The post-treatment process is used to improve the protection against crevice crack corrosion and the contamination by other steels
Table 7 - System component compliance and classification forresistance against corrosionSystem component Classification Compliance Subclause forMaterial and finishes according to compliance check
Non - metallic 6.5.1 Declaration 14.2.1
Reference - 6.5.2 Table 1 Declaration 14.2.2zinc coating classes 1 to 8 or measurementas in Table 1.
Non - referenced zinc 6.5.2 Table 1 By neutral salt 14.2.3coating classes 1 to 8 spray test NSS
Reference - stainless 6.5.2 Table 1 Declaration 14.2.2steel as in Table 1. Class 9A to 9D
Non-referenced Not classified Declaration Nonestainless steel
Other metallic coatings 6.5.2 Table 1 By neutral salt 14.2.3Column 1 classes spray test NSS1 to 8
Aluminium alloys or other 6.5.3 Under Under 14.2.4metals consideration consideration
Organic coatings 6.5.4 Under Under 14.2.5consideration consideration
Table 8 - Zinc coating thickness of referencematerialsClass Minimum Minimum coating Mean coating
Thickness thickness as given in thickness (minimum)BSEN 10346:2009 to ISO 1461
µm µm µm
0 (a) - - -1 5 - -2 12 - -3 - 15 -4 - 19 -5 - - 456 - - 557 - - 708 - - 85
(a) As declared by the manufacturer or responsible vendor
Table 2 - Minimum
temperature classificationMinimum transport, storageinstallation and applicationtemperature °C
+5- 5- 15- 20- 40- 50
Table 4 - Perforation base classificationClassification Perforation in the base area
A Up to 2%B Over 2% and up to 15%C Over 15% and up to 30%D More than 30%
Note: Classification D relates to IEC 60364 - 5 - 52 Subclause A.52.6.2second paragraph
Table 3 - Maximum
temperature classificationMaximum transport, storageinstallation and applicationtemperature °C
+40+60+90+105+120+150
6.9 According to impact resistance6.9.4 System component offering impact resistance up to20 J (as verified by testing in accordance with 10.9 Test forimpact resistance.)
7 Marking and documentation7.1 Each system component is marked by a label. Labelsused fully comply with the rubbing test. Boxed items arelabelled on the packaging
8 Dimensions
Key cross sectional dimensions for straight cable trays
Part No. External Internal External Internal X-sectionaldepth mm depth mm width mm width mm area mm2
(Internal)
CTSL12/0050# 12 11.1 50 48.2 535CTSL12/0075# 12 11.1 75 73.2 813CTSL12/0100# 12 11.1 100 98.2 1090CTSL12/0150# 12 11.1 150 148.2 1645CTSL12/0225# 12 11.1 225 223.2 2478CTSL18/0300# 18 16.8 300 297.6 5000CTSL25/0050# 25 24.3 50 48.6 1181CTSL25/0075# 25 24.3 75 73.6 1788CTSL25/0100# 25 24.3 100 98.6 2396CTSL25/0150# 25 24.1 150 148.2 3572CTSL25/0225# 25 24.1 225 223.2 5379CTSL25/0300# 25 24.0 300 298.0 7152CTSL25/0450# 25 23.8 450 447.6 10653CTSL25/0600# 25 23.8 600 597.6 14223CTSL50/0075# 50 49.2 75 73.4 3611CTSL50/0100# 50 49.2 100 98.4 4841CTSL50/0150# 50 49.1 150 148.2 7277CTSL50/0225# 50 48.8 225 222.6 10863CTSL50/0300# 50 48.8 300 297.6 14523CTSL50/0450# 50 48.5 450 447.0 21680CTSL50/0600# 50 48.5 600 597.0 28955CTSL50/0750# 50 48.0 750 746.0 35808CTSL50/0900# 50 48.0 900 896.0 43008
Minimum internal radius of fittingsMinimal internal radius of fittings available for theaccommodation of cables is 125mm.
9 Construction9.1 Surfaces of system components which are likely tocome into contact with cables during installation areinspected to ensure they shall not cause damage to thecables when installed correctly.9.2 As with all metallic system components, care should beexercised that handling is in accordance with the relativeCOSHH regulations and gloves should be worn.9.3 Screwed connections have been designed to withstandthe mechanical stresses occurring during installations andnormal use and will not cause damage to cables whencorrectly inserted. Screwed connections are in general ISOmetric threads fully compliant to tests in accordance with9.3.1 and 9.3.2 of the standard. Metsec cable tray systemsare usually assembled using M6 roofing bolts particularlyfor couplers, fishplates and connection to supportingframework. These bolts should be tightened to a torque of12N/m.
10 Mechanical propertiesCable tray lengths have been tested generally inaccordance with the standard under 10.2 and 10.3 forverification of the loading graphs. It should be noted thatindependent testing has been carried out to verify thestructural performance of the cable trays at the minimumand maximum temperature classifications for testconditions under 10.2.2.
All accessories eg bends, tees etc should be directlysupported by a suitable support device or devices atappropriate positions.
86
36
StandardsCable tray systemsCable tray systems
Metsec Cable Tray Systems generally conform to BS EN 61537:2007 Cable management - cable traysystems and cable ladder systems.
Information relating to compliance is detailed/highlightedwithin the following sections of the standard:
6 Classification6.1 According to material6.1.1 Metsec cable tray systems are metallic systemcomponents
6.2 According to resistance to flame propagation6.2.2 Metsec cable tray systems are non-flamepropagating system components
6.6 According to temperature6.6.1 Minimum temperature for the system components isgiven in Table 2.6.6.2 Maximum temperature for the system components isgiven in Table 3.
6.7 According to the free base area of the cable tray lengthas given in Table 4.
6.3 According to electrical continuity characteristics6.3.2 Metsec cable tray systems have electrical continuitycharacteristics
6.4 According to electrical conductivity6.4.1 Metsec cable tray systems are electrically conductivesystem components
6.5 According to resistance against corrosion6.5.2 Metsec cable tray systems are made of steel withmetallic finishes or stainless steel
(Resistance to corrosion is classified according to Table 1and follow the relevant specification in Table 8, withcompliance according to Table 7.)
Table 1 - classification for resistance against corrosionClass Reference - material and finish
0 (a) None
1 Electroplated to a minimum thickness of 5 µm
2 Electroplated to a minimum thickness of 12 µm
3 Pre - galvanised to grade 275 to EN 10327 and EN 10326
4 Pre - galvanised to grade 350 to EN 10346: 2009
5 Post - galvanised to a zinc mean coating thickness (minimum) of 45 µm according to ISO 1461 for zinc thickness only
6 Post - galvanised to a zinc mean coating thickness (minimum) of 55 µm according to ISO 1461 for zinc thickness only
7 Post - galvanised to a zinc mean coating thickness (minimum) of 70 µm according to ISO 1461 for zinc thickness only
8 Post - galvanised to a zinc mean coating thickness (minimum) of 85 µm according to ISO 1461 for zinc thickness only
9A Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S30400 or EN 10088 grade 1 - 4301 without a post treatment (b)
9B Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S31603 or EN 10088 grade 1 - 4404 without a post treatment (b)
9C Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S30400 or EN 10088 grade 1 - 4301 with a post treatment (b)
9D Stainless steel manufactured to ASTM: A 240/A 240M - 95a designation S31603 or EN 10088 grade 1 - 4404 with a post treatment (b)
(a) For materials which have no declared corrosion resistance classification
(b) The post-treatment process is used to improve the protection against crevice crack corrosion and the contamination by other steels
Table 7 - System component compliance and classification forresistance against corrosionSystem component Classification Compliance Subclause forMaterial and finishes according to compliance check
Non - metallic 6.5.1 Declaration 14.2.1
Reference - 6.5.2 Table 1 Declaration 14.2.2zinc coating classes 1 to 8 or measurementas in Table 1.
Non - referenced zinc 6.5.2 Table 1 By neutral salt 14.2.3coating classes 1 to 8 spray test NSS
Reference - stainless 6.5.2 Table 1 Declaration 14.2.2steel as in Table 1. Class 9A to 9D
Non-referenced Not classified Declaration Nonestainless steel
Other metallic coatings 6.5.2 Table 1 By neutral salt 14.2.3Column 1 classes spray test NSS1 to 8
Aluminium alloys or other 6.5.3 Under Under 14.2.4metals consideration consideration
Organic coatings 6.5.4 Under Under 14.2.5consideration consideration
Table 8 - Zinc coating thickness of referencematerialsClass Minimum Minimum coating Mean coating
Thickness thickness as given in thickness (minimum)BSEN 10346:2009 to ISO 1461
µm µm µm
0 (a) - - -1 5 - -2 12 - -3 - 15 -4 - 19 -5 - - 456 - - 557 - - 708 - - 85
(a) As declared by the manufacturer or responsible vendor
Table 2 - Minimum
temperature classificationMinimum transport, storageinstallation and applicationtemperature °C
+5- 5- 15- 20- 40- 50
Table 4 - Perforation base classificationClassification Perforation in the base area
A Up to 2%B Over 2% and up to 15%C Over 15% and up to 30%D More than 30%
Note: Classification D relates to IEC 60364 - 5 - 52 Subclause A.52.6.2second paragraph
Table 3 - Maximum
temperature classificationMaximum transport, storageinstallation and applicationtemperature °C
+40+60+90+105+120+150
6.9 According to impact resistance6.9.4 System component offering impact resistance up to20 J (as verified by testing in accordance with 10.9 Test forimpact resistance.)
7 Marking and documentation7.1 Each system component is marked by a label. Labelsused fully comply with the rubbing test. Boxed items arelabelled on the packaging
8 Dimensions
Key cross sectional dimensions for straight cable trays
Part No. External Internal External Internal X-sectionaldepth mm depth mm width mm width mm area mm2
(Internal)
CTSL12/0050# 12 11.1 50 48.2 535CTSL12/0075# 12 11.1 75 73.2 813CTSL12/0100# 12 11.1 100 98.2 1090CTSL12/0150# 12 11.1 150 148.2 1645CTSL12/0225# 12 11.1 225 223.2 2478CTSL18/0300# 18 16.8 300 297.6 5000CTSL25/0050# 25 24.3 50 48.6 1181CTSL25/0075# 25 24.3 75 73.6 1788CTSL25/0100# 25 24.3 100 98.6 2396CTSL25/0150# 25 24.1 150 148.2 3572CTSL25/0225# 25 24.1 225 223.2 5379CTSL25/0300# 25 24.0 300 298.0 7152CTSL25/0450# 25 23.8 450 447.6 10653CTSL25/0600# 25 23.8 600 597.6 14223CTSL50/0075# 50 49.2 75 73.4 3611CTSL50/0100# 50 49.2 100 98.4 4841CTSL50/0150# 50 49.1 150 148.2 7277CTSL50/0225# 50 48.8 225 222.6 10863CTSL50/0300# 50 48.8 300 297.6 14523CTSL50/0450# 50 48.5 450 447.0 21680CTSL50/0600# 50 48.5 600 597.0 28955CTSL50/0750# 50 48.0 750 746.0 35808CTSL50/0900# 50 48.0 900 896.0 43008
Minimum internal radius of fittingsMinimal internal radius of fittings available for theaccommodation of cables is 125mm.
9 Construction9.1 Surfaces of system components which are likely tocome into contact with cables during installation areinspected to ensure they shall not cause damage to thecables when installed correctly.9.2 As with all metallic system components, care should beexercised that handling is in accordance with the relativeCOSHH regulations and gloves should be worn.9.3 Screwed connections have been designed to withstandthe mechanical stresses occurring during installations andnormal use and will not cause damage to cables whencorrectly inserted. Screwed connections are in general ISOmetric threads fully compliant to tests in accordance with9.3.1 and 9.3.2 of the standard. Metsec cable tray systemsare usually assembled using M6 roofing bolts particularlyfor couplers, fishplates and connection to supportingframework. These bolts should be tightened to a torque of12N/m.
10 Mechanical propertiesCable tray lengths have been tested generally inaccordance with the standard under 10.2 and 10.3 forverification of the loading graphs. It should be noted thatindependent testing has been carried out to verify thestructural performance of the cable trays at the minimumand maximum temperature classifications for testconditions under 10.2.2.
All accessories eg bends, tees etc should be directlysupported by a suitable support device or devices atappropriate positions.
87
39
Cable tray systemsProduct footprint
Length 1 = Width + radius
Radius
Radius
Radius
100
Width
Width 1 Width 2
Radius250mm
Radius
Length 2 = width + 2 x radius
Width Radius
Width
Radius
Width
Radius
Length 1 = width 1 + radius
Width 2
Radius
250m
m
Radius
Radius
Radius
Length 2 = width 2 + 2 x radius
Length = width + 2 x radius
Width
Length = width + 2 x radius
Radius
Width
Width 1
Radius
Radius
Radius
100
width 2Width 1
Length = width+ radius
Length = width + radius
Radius
RadiusRadius
Radius
90º flat bend Crossover
Equal tee Unequal tee
90º riser Straight or right / left hand reducer
Straight length
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymm
50 CTSL12/0050PG3 CTSL25/0050PG3 N/A
75 CTSL12/0075PG3 CTSL25/0075PG3 CTSL50/0075PG3
100 CTSL12/0100PG3 CTSL25/0100PG3 CTSL50/0100PG3
150 CTSL12/0150PG3 CTSL25/0150PG3 CTSL50/0150PG3
225 CTSL12/0225PG3 CTSL25/0225PG3 CTSL50/0225PG3
300 CTSL18/0300PG3 CTSL25/0300PG3 CTSL50/0300PG3
450 N/A CTSL25/0450PG3 CTSL50/0450PG3
600 N/A CTSL25/0600PG3 CTSL50/0600PG3
750 N/A N/A CTSL50/0750PG3
900 N/A N/A CTSL50/0900PG3
Medium duty straight couplers
Only required for straight tray to straight tray connection – medium duty rangeFinish: post galvanised = HDG, stainless steel grade 316 = SS
Sold in pairs (fasteners excluded)
CTSC25HDGPR
Not available in pre galvanised
Medium duty wrap over couplers
Only required for straight tray to straight tray connection – medium duty rangeFinish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Sold in pairs (fasteners excluded)
CTC25PGPR
Heavy duty straight couplers
Only required for straight tray to straight tray connection – heavy duty rangeFinish: post galvanised = HDG, stainless steel grade 316 = SS
Sold in pairs (fasteners excluded)
CTSC50HDGPR
Not available in pre galvanised
Heavy duty wrap over couplers
Only required for straight tray to straight tray connection – heavy duty rangeFinish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Sold in pairs (fasteners excluded)
CTC50PGPR
Cable tray systemsCable tray systems
Footprints are identical for all ranges
Cable tray — accessory foot printStandard radius is 125mm
88
Cable tray systems
38
Product footprint
Length 1 = Width + radius
Radius
Radius
Radius
100
Width
Width 1 Width 2
Radius250mm
Radius
Length 2 = width + 2 x radius
Width Radius
Width
Radius
Width
Radius
Length 1 = width 1 + radius
Width 2
Radius
250m
m
Radius
Radius
Radius
Length 2 = width 2 + 2 x radius
Length = width + 2 x radius
Width
Length = width + 2 x radius
Radius
Width
Width 1
Radius
Radius
Radius
100
width 2Width 1
Length = width+ radius
Length = width + radius
Radius
RadiusRadius
Radius
90º flat bend Crossover
Equal tee Unequal tee
90º riser Straight or right / left hand reducer
Straight length
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymm
50 CTSL12/0050PG3 CTSL25/0050PG3 N/A
75 CTSL12/0075PG3 CTSL25/0075PG3 CTSL50/0075PG3
100 CTSL12/0100PG3 CTSL25/0100PG3 CTSL50/0100PG3
150 CTSL12/0150PG3 CTSL25/0150PG3 CTSL50/0150PG3
225 CTSL12/0225PG3 CTSL25/0225PG3 CTSL50/0225PG3
300 CTSL18/0300PG3 CTSL25/0300PG3 CTSL50/0300PG3
450 N/A CTSL25/0450PG3 CTSL50/0450PG3
600 N/A CTSL25/0600PG3 CTSL50/0600PG3
750 N/A N/A CTSL50/0750PG3
900 N/A N/A CTSL50/0900PG3
Medium duty straight couplers
Only required for straight tray to straight tray connection – medium duty rangeFinish: post galvanised = HDG, stainless steel grade 316 = SS
Sold in pairs (fasteners excluded)
CTSC25HDGPR
Not available in pre galvanised
Medium duty wrap over couplers
Only required for straight tray to straight tray connection – medium duty rangeFinish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Sold in pairs (fasteners excluded)
CTC25PGPR
Heavy duty straight couplers
Only required for straight tray to straight tray connection – heavy duty rangeFinish: post galvanised = HDG, stainless steel grade 316 = SS
Sold in pairs (fasteners excluded)
CTSC50HDGPR
Not available in pre galvanised
Heavy duty wrap over couplers
Only required for straight tray to straight tray connection – heavy duty rangeFinish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Sold in pairs (fasteners excluded)
CTC50PGPR
Cable tray systemsCable tray systems
Footprints are identical for all ranges
Cable tray — accessory foot printStandard radius is 125mm
89
41
Cable tray systems90º flat bends
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymm
50 CTFB12/0050PG90 CTFB25/0050PG90 N/A
75 CTFB12/0075PG90 CTFB25/0075PG90 CTFB50/0075PG90
100 CTFB12/0100PG90 CTFB25/0100PG90 CTFB50/0100PG90
150 CTFB12/0150PG90 CTFB25/0150PG90 CTFB50/0150PG90
225 CTFB12/0225PG90 CTFB25/0225PG90 CTFB50/0225PG90
300 CTFB18/0300PG90 CTFB25/0300PG90 CTFB50/0300PG90
450 N/A CTFB25/0450PG90 CTFB50/0450PG90
600 N/A CTFB25/0600PG90 CTFB50/0600PG90
750 N/A N/A CTFB50/0750PG90
900 N/A N/A CTFB50/0900PG90
45º flat bends
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymm
50 CTFB12/0050PG45 CTFB25/0050PG45 N/A
75 CTFB12/0075PG45 CTFB25/0075PG45 CTFB50/0075PG45
100 CTFB12/0100PG45 CTFB25/0100PG45 CTFB50/0100PG45
150 CTFB12/0150PG45 CTFB25/0150PG45 CTFB50/0150PG45
225 CTFB12/0225PG45 CTFB25/0225PG45 CTFB50/0225PG45
300 CTFB18/0300PG45 CTFB25/0300PG45 CTFB50/0300PG45
450 N/A CTFB25/0450PG45 CTFB50/0450PG45
600 N/A CTFB25/0600PG45 CTFB50/0600PG45
750 N/A N/A CTFB50/0750PG45
900 N/A N/A CTFB50/0900PG45
Adjustable flat bends
(Not available for light duty cable tray)Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Medium duty Heavy dutymm
50 CTAB25/0050PG N/A
75 CTAB25/0075PG CTAB50/0075PG
100 CTAB25/0100PG CTAB50/0100PG
150 CTAB25/0150PG CTAB50/0150PG
225 CTAB25/0225PG CTAB50/0225PG
300 CTAB25/0300PG CTAB50/0300PG
Unequal tee (made to order)
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Equal tee
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymm
50 CTET12/0050PG CTET25/0050PG N/A
75 CTET12/0075PG CTET25/0075PG CTET50/0075PG
100 CTET12/0100PG CTET25/0100PG CTET50/0100PG
150 CTET12/0150PG CTET25/0150PG CTET50/0150PG
225 CTET12/0225PG CTET25/0225PG CTET50/0225PG
300 CTET18/0300PG CTET25/0300PG CTET50/0300PG
450 N/A CTET25/0450PG CTET50/0450PG
600 N/A CTET25/0600PG CTET50/0600PG
750 N/A N/A CTET50/0750PG
900 N/A N/A CTET50/0900PG
Cable tray systemsCable tray systems
W1
W2
How to generate the part number - CTUT (depth)/W1/W2(finish)Example - CTUT 25/0300/0150/PGTable below shows a complete list of W1 and W2 combinations.
W1 W2 W1 W2 W1 W2 W1 W2
50 75 100 450 300 75 600 450
50 100 100 600 300 100 600 750
50 150 100 750 300 150 600 900
50 225 100 900 300 225 750 50
50 300 150 50 300 450 750 75
50 450 150 75 300 600 750 100
50 600 150 100 300 750 750 150
50 750 150 225 300 900 750 225
50 900 150 300 450 50 750 300
75 50 150 450 450 75 750 450
75 100 150 600 450 100 750 600
75 150 150 750 450 150 750 900
75 225 150 900 450 225 900 50
75 300 225 50 450 300 900 75
75 450 225 75 450 600 900 100
75 600 225 100 450 750 900 150
75 750 225 150 450 900 900 225
75 900 225 300 600 50 900 300
100 50 225 450 600 75 900 450
100 75 225 600 600 100 900 600
100 150 225 750 600 150 900 750
100 225 225 900 600 225
100 300 300 50 600 300
90
Cable tray systems
40
90º flat bends
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymm
50 CTFB12/0050PG90 CTFB25/0050PG90 N/A
75 CTFB12/0075PG90 CTFB25/0075PG90 CTFB50/0075PG90
100 CTFB12/0100PG90 CTFB25/0100PG90 CTFB50/0100PG90
150 CTFB12/0150PG90 CTFB25/0150PG90 CTFB50/0150PG90
225 CTFB12/0225PG90 CTFB25/0225PG90 CTFB50/0225PG90
300 CTFB18/0300PG90 CTFB25/0300PG90 CTFB50/0300PG90
450 N/A CTFB25/0450PG90 CTFB50/0450PG90
600 N/A CTFB25/0600PG90 CTFB50/0600PG90
750 N/A N/A CTFB50/0750PG90
900 N/A N/A CTFB50/0900PG90
45º flat bends
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymm
50 CTFB12/0050PG45 CTFB25/0050PG45 N/A
75 CTFB12/0075PG45 CTFB25/0075PG45 CTFB50/0075PG45
100 CTFB12/0100PG45 CTFB25/0100PG45 CTFB50/0100PG45
150 CTFB12/0150PG45 CTFB25/0150PG45 CTFB50/0150PG45
225 CTFB12/0225PG45 CTFB25/0225PG45 CTFB50/0225PG45
300 CTFB18/0300PG45 CTFB25/0300PG45 CTFB50/0300PG45
450 N/A CTFB25/0450PG45 CTFB50/0450PG45
600 N/A CTFB25/0600PG45 CTFB50/0600PG45
750 N/A N/A CTFB50/0750PG45
900 N/A N/A CTFB50/0900PG45
Adjustable flat bends
(Not available for light duty cable tray)Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Medium duty Heavy dutymm
50 CTAB25/0050PG N/A
75 CTAB25/0075PG CTAB50/0075PG
100 CTAB25/0100PG CTAB50/0100PG
150 CTAB25/0150PG CTAB50/0150PG
225 CTAB25/0225PG CTAB50/0225PG
300 CTAB25/0300PG CTAB50/0300PG
Unequal tee (made to order)
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Equal tee
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymm
50 CTET12/0050PG CTET25/0050PG N/A
75 CTET12/0075PG CTET25/0075PG CTET50/0075PG
100 CTET12/0100PG CTET25/0100PG CTET50/0100PG
150 CTET12/0150PG CTET25/0150PG CTET50/0150PG
225 CTET12/0225PG CTET25/0225PG CTET50/0225PG
300 CTET18/0300PG CTET25/0300PG CTET50/0300PG
450 N/A CTET25/0450PG CTET50/0450PG
600 N/A CTET25/0600PG CTET50/0600PG
750 N/A N/A CTET50/0750PG
900 N/A N/A CTET50/0900PG
Cable tray systemsCable tray systems
W1
W2
How to generate the part number - CTUT (depth)/W1/W2(finish)Example - CTUT 25/0300/0150/PGTable below shows a complete list of W1 and W2 combinations.
W1 W2 W1 W2 W1 W2 W1 W2
50 75 100 450 300 75 600 450
50 100 100 600 300 100 600 750
50 150 100 750 300 150 600 900
50 225 100 900 300 225 750 50
50 300 150 50 300 450 750 75
50 450 150 75 300 600 750 100
50 600 150 100 300 750 750 150
50 750 150 225 300 900 750 225
50 900 150 300 450 50 750 300
75 50 150 450 450 75 750 450
75 100 150 600 450 100 750 600
75 150 150 750 450 150 750 900
75 225 150 900 450 225 900 50
75 300 225 50 450 300 900 75
75 450 225 75 450 600 900 100
75 600 225 100 450 750 900 150
75 750 225 150 450 900 900 225
75 900 225 300 600 50 900 300
100 50 225 450 600 75 900 450
100 75 225 600 600 100 900 600
100 150 225 750 600 150 900 750
100 225 225 900 600 225
100 300 300 50 600 300
91
43
Cable tray systemsCrossovers
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymm
50 CTCO12/0050PG CTCO25/0050PG N/A
75 CTCO12/0075PG CTCO25/0075PG CTCO50/0075PG
100 CTCO12/0100PG CTCO25/0100PG CTCO50/0100PG
150 CTCO12/0150PG CTCO25/0150PG CTCO50/0150PG
225 CTCO12/0225PG CTCO25/0225PG CTCO50/0225PG
300 CTCO18/0300PG CTCO25/0300PG CTCO50/0300PG
450 N/A CTCO25/0450PG CTCO50/0450PG
600 N/A CTCO25/0600PG CTCO50/0600PG
750 N/A N/A CTCO50/0750PG
900 N/A N/A CTCO50/0900PG
Internal riser - flexible
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSCTFR = Flexible risers are supplied flat and folded on site to suit angle.CTIR = Internal risers are folded to suit stated angle. 90 = 90°, 60 = 60°, 45 = 45°, 30 = 30°Eg: CTIR50/0900PG90
Width Light duty Medium duty Heavy dutymm
50 CTFR12/0050PG CTFR25/0050PG N/A
75 CTFR12/0075PG CTFR25/0075PG CTFR50/0075PG
100 CTFR12/0100PG CTFR25/0100PG CTFR50/0100PG
150 CTFR12/0150PG CTFR25/0150PG CTFR50/0150PG
225 CTFR12/0225PG CTFR25/0225PG CTFR50/0225PG
300 CTFR18/0300PG CTFR25/0300PG CTFR50/0300PG
450 N/A CTFR25/0450PG CTFR50/0450PG
600 N/A CTFR25/0600PG CTFR50/0600PG
750 N/A N/A CTIR50/0750PG90 (only available pre-folded)
900 N/A N/A CTIR50/0900PG90 (only available pre-folded)
External riser - flexible
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSCTFR = Flexible risers are supplied flat and folded on site to suit angle.CTER = External risers are folded to suit stated angle. 90 = 90°, 60 = 60°, 45 = 45°, 30 = 30°Eg: CTER50/0900PG90
Width Light duty Medium duty Heavy dutymm
50 CTFR12/0050PG CTFR25/0050PG N/A
75 CTFR12/0075PG CTFR25/0075PG CTFR50/0075PG
100 CTFR12/0100PG CTFR25/0100PG CTFR50/0100PG
150 CTFR12/0150PG CTFR25/0150PG CTFR50/0150PG
225 CTFR12/0225PG CTFR25/0225PG CTFR50/0225PG
300 CTFR18/0300PG CTFR25/0300PG CTFR50/0300PG
450 N/A CTFR25/0450PG CTFR50/0450PG
600 N/A CTFR25/0600PG CTFR50/0600PG
750 N/A N/A CTER50/0750PG90 (only available pre-folded)
900 N/A N/A CTER50/0900PG90 (only available pre-folded)
Reducers
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymmW1 W2
75 50 CTSR12/0075/0050PG CTSR25/0075/0050PG N/A
100 50 CTSR12/0100/0050PG CTSR25/0100/0050PG N/A
150 50 CTSR12/0150/0050PG CTSR25/0150/0050PG N/A
225 50 CTSR12/0225/0050PG CTSR25/0225/0050PG N/A
300 50 CTSR18/0300/0050PG CTSR25/0300/0050PG N/A
450 50 N/A CTSR25/0450/0050PG N/A
600 50 N/A CTSR25/0600/0050PG N/A
750 50 N/A N/A N/A
900 50 N/A N/A N/A
100 75 CTSR12/0100/0075PG CTSR25/0100/0075PG CTSR50/0100/0075PG
150 75 CTSR12/0150/0075PG CTSR25/0150/0075PG CTSR50/0150/0075PG
225 75 CTSR12/0225/0075PG CTSR25/0225/0075PG CTSR50/0225/0075PG
300 75 CTSR18/0300/0075PG CTSR25/0300/0075PG CTSR50/0300/0075PG
450 75 N/A CTSR25/0450/0075PG CTSR50/0450/0075PG
600 75 N/A CTSR25/0600/0075PG CTSR50/0600/0075PG
750 75 N/A N/A CTSR50/0750/0075PG
900 75 N/A N/A CTSR50/0900/0075PG
150 100 CTSR12/0150/0100PG CTSR25/0150/0100PG CTSR50/0150/0100PG
225 100 CTSR12/0225/0100PG CTSR25/0225/0100PG CTSR50/0225/0100PG
300 100 CTSR18/0300/0100PG CTSR25/0300/0100PG CTSR50/0300/0100PG
450 100 N/A CTSR25/0450/0100PG CTSR50/0450/0100PG
600 100 N/A CTSR25/0600/0100PG CTSR50/0600/0100PG
750 100 N/A N/A CTSR50/0750/0100PG
900 100 N/A N/A CTSR50/0900/0100PG
225 150 CTSR12/0225/0150PG CTSR25/0225/0150PG CTSR50/0225/0150PG
300 150 CTSR18/0300/0150PG CTSR25/0300/0150PG CTSR50/0300/0150PG
450 150 N/A CTSR25/0450/0150PG CTSR50/0450/0150PG
600 150 N/A CTSR25/0600/0150PG CTSR50/0600/0150PG
750 150 N/A N/A CTSR50/0750/0150PG
900 150 N/A N/A CTSR50/0900/0150PG
300 225 CTSR18/0300/0225PG CTSR25/0300/0225PG CTSR50/0300/0225PG
450 225 N/A CTSR25/0450/0225PG CTSR50/0450/0225PG
600 225 N/A CTSR25/0600/0225PG CTSR50/0600/0225PG
750 225 N/A N/A CTSR50/0750/0225PG
900 225 N/A N/A CTSR50/0900/0225PG
450 300 N/A CTSR25/0450/0300PG CTSR50/0450/0300PG
600 300 N/A CTSR25/0600/0300PG CTSR50/0600/0300PG
750 300 N/A N/A CTSR50/0750/0300PG
900 300 N/A N/A CTSR50/0900/0300PG
600 450 N/A CTSR25/0600/0450PG CTSR50/0600/0450PG
750 450 N/A N/A CTSR50/0750/0450PG
900 450 N/A N/A CTSR50/0900/0450PG
750 600 N/A N/A CTSR50/0750/0600PG
900 600 N/A N/A CTSR50/0900/0600PG
900 750 N/A N/A CTSR50/0900/0750PG
Cable tray systemsCable tray systems
W1
W2
92
Cable tray systems
42
Crossovers
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymm
50 CTCO12/0050PG CTCO25/0050PG N/A
75 CTCO12/0075PG CTCO25/0075PG CTCO50/0075PG
100 CTCO12/0100PG CTCO25/0100PG CTCO50/0100PG
150 CTCO12/0150PG CTCO25/0150PG CTCO50/0150PG
225 CTCO12/0225PG CTCO25/0225PG CTCO50/0225PG
300 CTCO18/0300PG CTCO25/0300PG CTCO50/0300PG
450 N/A CTCO25/0450PG CTCO50/0450PG
600 N/A CTCO25/0600PG CTCO50/0600PG
750 N/A N/A CTCO50/0750PG
900 N/A N/A CTCO50/0900PG
Internal riser - flexible
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSCTFR = Flexible risers are supplied flat and folded on site to suit angle.CTIR = Internal risers are folded to suit stated angle. 90 = 90°, 60 = 60°, 45 = 45°, 30 = 30°Eg: CTIR50/0900PG90
Width Light duty Medium duty Heavy dutymm
50 CTFR12/0050PG CTFR25/0050PG N/A
75 CTFR12/0075PG CTFR25/0075PG CTFR50/0075PG
100 CTFR12/0100PG CTFR25/0100PG CTFR50/0100PG
150 CTFR12/0150PG CTFR25/0150PG CTFR50/0150PG
225 CTFR12/0225PG CTFR25/0225PG CTFR50/0225PG
300 CTFR18/0300PG CTFR25/0300PG CTFR50/0300PG
450 N/A CTFR25/0450PG CTFR50/0450PG
600 N/A CTFR25/0600PG CTFR50/0600PG
750 N/A N/A CTIR50/0750PG90 (only available pre-folded)
900 N/A N/A CTIR50/0900PG90 (only available pre-folded)
External riser - flexible
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSCTFR = Flexible risers are supplied flat and folded on site to suit angle.CTER = External risers are folded to suit stated angle. 90 = 90°, 60 = 60°, 45 = 45°, 30 = 30°Eg: CTER50/0900PG90
Width Light duty Medium duty Heavy dutymm
50 CTFR12/0050PG CTFR25/0050PG N/A
75 CTFR12/0075PG CTFR25/0075PG CTFR50/0075PG
100 CTFR12/0100PG CTFR25/0100PG CTFR50/0100PG
150 CTFR12/0150PG CTFR25/0150PG CTFR50/0150PG
225 CTFR12/0225PG CTFR25/0225PG CTFR50/0225PG
300 CTFR18/0300PG CTFR25/0300PG CTFR50/0300PG
450 N/A CTFR25/0450PG CTFR50/0450PG
600 N/A CTFR25/0600PG CTFR50/0600PG
750 N/A N/A CTER50/0750PG90 (only available pre-folded)
900 N/A N/A CTER50/0900PG90 (only available pre-folded)
Reducers
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Width Light duty Medium duty Heavy dutymmW1 W2
75 50 CTSR12/0075/0050PG CTSR25/0075/0050PG N/A
100 50 CTSR12/0100/0050PG CTSR25/0100/0050PG N/A
150 50 CTSR12/0150/0050PG CTSR25/0150/0050PG N/A
225 50 CTSR12/0225/0050PG CTSR25/0225/0050PG N/A
300 50 CTSR18/0300/0050PG CTSR25/0300/0050PG N/A
450 50 N/A CTSR25/0450/0050PG N/A
600 50 N/A CTSR25/0600/0050PG N/A
750 50 N/A N/A N/A
900 50 N/A N/A N/A
100 75 CTSR12/0100/0075PG CTSR25/0100/0075PG CTSR50/0100/0075PG
150 75 CTSR12/0150/0075PG CTSR25/0150/0075PG CTSR50/0150/0075PG
225 75 CTSR12/0225/0075PG CTSR25/0225/0075PG CTSR50/0225/0075PG
300 75 CTSR18/0300/0075PG CTSR25/0300/0075PG CTSR50/0300/0075PG
450 75 N/A CTSR25/0450/0075PG CTSR50/0450/0075PG
600 75 N/A CTSR25/0600/0075PG CTSR50/0600/0075PG
750 75 N/A N/A CTSR50/0750/0075PG
900 75 N/A N/A CTSR50/0900/0075PG
150 100 CTSR12/0150/0100PG CTSR25/0150/0100PG CTSR50/0150/0100PG
225 100 CTSR12/0225/0100PG CTSR25/0225/0100PG CTSR50/0225/0100PG
300 100 CTSR18/0300/0100PG CTSR25/0300/0100PG CTSR50/0300/0100PG
450 100 N/A CTSR25/0450/0100PG CTSR50/0450/0100PG
600 100 N/A CTSR25/0600/0100PG CTSR50/0600/0100PG
750 100 N/A N/A CTSR50/0750/0100PG
900 100 N/A N/A CTSR50/0900/0100PG
225 150 CTSR12/0225/0150PG CTSR25/0225/0150PG CTSR50/0225/0150PG
300 150 CTSR18/0300/0150PG CTSR25/0300/0150PG CTSR50/0300/0150PG
450 150 N/A CTSR25/0450/0150PG CTSR50/0450/0150PG
600 150 N/A CTSR25/0600/0150PG CTSR50/0600/0150PG
750 150 N/A N/A CTSR50/0750/0150PG
900 150 N/A N/A CTSR50/0900/0150PG
300 225 CTSR18/0300/0225PG CTSR25/0300/0225PG CTSR50/0300/0225PG
450 225 N/A CTSR25/0450/0225PG CTSR50/0450/0225PG
600 225 N/A CTSR25/0600/0225PG CTSR50/0600/0225PG
750 225 N/A N/A CTSR50/0750/0225PG
900 225 N/A N/A CTSR50/0900/0225PG
450 300 N/A CTSR25/0450/0300PG CTSR50/0450/0300PG
600 300 N/A CTSR25/0600/0300PG CTSR50/0600/0300PG
750 300 N/A N/A CTSR50/0750/0300PG
900 300 N/A N/A CTSR50/0900/0300PG
600 450 N/A CTSR25/0600/0450PG CTSR50/0600/0450PG
750 450 N/A N/A CTSR50/0750/0450PG
900 450 N/A N/A CTSR50/0900/0450PG
750 600 N/A N/A CTSR50/0750/0600PG
900 600 N/A N/A CTSR50/0900/0600PG
900 750 N/A N/A CTSR50/0900/0750PG
Cable tray systemsCable tray systems
W1
W2
93
45
Cable tray systemsFishplate couplers
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Widthmm (always required for cut lengths of light duty tray)
50 CTFP1PG
75 CTFP1PG
100 CTFP1PG
150 CTFP1PG
225 CTFP2PG
300 CTFP2PG
450 CTFP2PG
600 CTFP2PG
750 CTFP2PG
900 CTFP2PG
Cover - straight length - 3m long
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 6 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty
50 CTSL12CV/050PG CTSL25CC/050PG N/A
75 CTSL12CV/075PG CTSL25CC/075PG CTSL50CC/075PG
100 CTSL12CV/100PG CTSL25CC/100PG CTSL50CC/100PG
150 CTSL12CV/150PG CTSL25CC/150PG CTSL50CC/150PG
225 CTSL12CV/225PG CTSL25CC/225PG CTSL50CC/225PG
300 CTSL18CV/300PG CTSL25CC/300PG CTSL50CC/300PG
450 N/A CTSL25CC/450PG CTSL50CC/450PG
600 N/A CTSL25CC/600PG CTSL50CC/600PG
750 N/A N/A CTSL50CC/750PG
900 N/A N/A CTSL50CC/900PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cover - 90º flat bends
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 5 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty
50 CTFB12CV/050PG90 CTFB25CC/050PG90 N/A
75 CTFB12CV/075PG90 CTFB25CC/075PG90 CTFB50CC/075PG90
100 CTFB12CV/100PG90 CTFB25CC/100PG90 CTFB50CC/100PG90
150 CTFB12CV/150PG90 CTFB25CC/150PG90 CTFB50CC/150PG90
225 CTFB12CV/225PG90 CTFB25CC/225PG90 CTFB50CC/225PG90
300 CTFB18CV/300PG90 CTFB25CC/300PG90 CTFB50CC/300PG90
450 N/A CTFB25CC/450PG90 CTFB50CC/450PG90
600 N/A CTFB25CC/600PG90 CTFB50CC/600PG90
750 N/A N/A CTFB50CC/750PG90
900 N/A N/A CTFB50CC/900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Extra cover clips
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CV
Duty Standard Ventilated
Light N/A CTCCV18HDG
Medium CTCCC25HDG CTCCV25HDG
Heavy CTCCC50HDG CTCCV50HDG
Cover - 45º flat bends
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 5 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty
50 CTFB12CV/050PG45 CTFB25CC/050PG45 N/A
75 CTFB12CV/075PG45 CTFB25CC/075PG45 CTFB50CC/075PG45
100 CTFB12CV/100PG45 CTFB25CC/100PG45 CTFB50CC/100PG45
150 CTFB12CV/150PG45 CTFB25CC/150PG45 CTFB50CC/150PG45
225 CTFB12CV/225PG45 CTFB25CC/225PG45 CTFB50CC/225PG45
300 CTFB18CV/300PG45 CTFB25CC/300PG45 CTFB50CC/300PG45
450 N/A CTFB25CC/450PG45 CTFB50CC/450PG45
600 N/A CTFB25CC/600PG45 CTFB50CC/600PG45
750 N/A N/A CTFB50CC/750PG45
900 N/A N/A CTFB50CC/900PG45
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cover - crossover
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 4 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty
50 CTCO12CV/050PG CTCO25CC/050PG N/A
75 CTCO12CV/075PG CTCO25CC/075PG CTCO50CC/075PG
100 CTCO12CV/100PG CTCO25CC/100PG CTCO50CC/100PG
150 CTCO12CV/150PG CTCO25CC/150PG CTCO50CC/150PG
225 CTCO12CV/225PG CTCO25CC/225PG CTCO50CC/225PG
300 CTCO18CV/300PG CTCO25CC/300PG CTCO50CC/300PG
450 N/A CTCO25CC/450PG CTCO50CC/450PG
600 N/A CTCO25CC/600PG CTCO50CC/600PG
750 N/A N/A CTCO50CC/750PG
900 N/A N/A CTCO50CC/900PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cover - equal tee
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 5 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty
50 CTET12CV/050PG CTET25CC/050PG N/A
75 CTET12CV/075PG CTET25CC/075PG CTET50CC/075PG
100 CTET12CV/100PG CTET25CC/100PG CTET50CC/100PG
150 CTET12CV/150PG CTET25CC/150PG CTET50CC/150PG
225 CTET12CV/225PG CTET25CC/225PG CTET50CC/225PG
300 CTET18CV/300PG CTET25CC/300PG CTET50CC/300PG
450 N/A CTET25CC/450PG CTET50CC/450PG
600 N/A CTET25CC/600PG CTET50CC/600PG
750 N/A N/A CTET50CC/750PG
900 N/A N/A CTET50CC/900PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cable tray systemsCable tray systems
94
Cable tray systems
44
Fishplate couplers
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Widthmm (always required for cut lengths of light duty tray)
50 CTFP1PG
75 CTFP1PG
100 CTFP1PG
150 CTFP1PG
225 CTFP2PG
300 CTFP2PG
450 CTFP2PG
600 CTFP2PG
750 CTFP2PG
900 CTFP2PG
Cover - straight length - 3m long
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 6 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty
50 CTSL12CV/050PG CTSL25CC/050PG N/A
75 CTSL12CV/075PG CTSL25CC/075PG CTSL50CC/075PG
100 CTSL12CV/100PG CTSL25CC/100PG CTSL50CC/100PG
150 CTSL12CV/150PG CTSL25CC/150PG CTSL50CC/150PG
225 CTSL12CV/225PG CTSL25CC/225PG CTSL50CC/225PG
300 CTSL18CV/300PG CTSL25CC/300PG CTSL50CC/300PG
450 N/A CTSL25CC/450PG CTSL50CC/450PG
600 N/A CTSL25CC/600PG CTSL50CC/600PG
750 N/A N/A CTSL50CC/750PG
900 N/A N/A CTSL50CC/900PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cover - 90º flat bends
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 5 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty
50 CTFB12CV/050PG90 CTFB25CC/050PG90 N/A
75 CTFB12CV/075PG90 CTFB25CC/075PG90 CTFB50CC/075PG90
100 CTFB12CV/100PG90 CTFB25CC/100PG90 CTFB50CC/100PG90
150 CTFB12CV/150PG90 CTFB25CC/150PG90 CTFB50CC/150PG90
225 CTFB12CV/225PG90 CTFB25CC/225PG90 CTFB50CC/225PG90
300 CTFB18CV/300PG90 CTFB25CC/300PG90 CTFB50CC/300PG90
450 N/A CTFB25CC/450PG90 CTFB50CC/450PG90
600 N/A CTFB25CC/600PG90 CTFB50CC/600PG90
750 N/A N/A CTFB50CC/750PG90
900 N/A N/A CTFB50CC/900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Extra cover clips
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CV
Duty Standard Ventilated
Light N/A CTCCV18HDG
Medium CTCCC25HDG CTCCV25HDG
Heavy CTCCC50HDG CTCCV50HDG
Cover - 45º flat bends
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 5 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty
50 CTFB12CV/050PG45 CTFB25CC/050PG45 N/A
75 CTFB12CV/075PG45 CTFB25CC/075PG45 CTFB50CC/075PG45
100 CTFB12CV/100PG45 CTFB25CC/100PG45 CTFB50CC/100PG45
150 CTFB12CV/150PG45 CTFB25CC/150PG45 CTFB50CC/150PG45
225 CTFB12CV/225PG45 CTFB25CC/225PG45 CTFB50CC/225PG45
300 CTFB18CV/300PG45 CTFB25CC/300PG45 CTFB50CC/300PG45
450 N/A CTFB25CC/450PG45 CTFB50CC/450PG45
600 N/A CTFB25CC/600PG45 CTFB50CC/600PG45
750 N/A N/A CTFB50CC/750PG45
900 N/A N/A CTFB50CC/900PG45
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cover - crossover
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 4 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty
50 CTCO12CV/050PG CTCO25CC/050PG N/A
75 CTCO12CV/075PG CTCO25CC/075PG CTCO50CC/075PG
100 CTCO12CV/100PG CTCO25CC/100PG CTCO50CC/100PG
150 CTCO12CV/150PG CTCO25CC/150PG CTCO50CC/150PG
225 CTCO12CV/225PG CTCO25CC/225PG CTCO50CC/225PG
300 CTCO18CV/300PG CTCO25CC/300PG CTCO50CC/300PG
450 N/A CTCO25CC/450PG CTCO50CC/450PG
600 N/A CTCO25CC/600PG CTCO50CC/600PG
750 N/A N/A CTCO50CC/750PG
900 N/A N/A CTCO50CC/900PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cover - equal tee
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 5 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty
50 CTET12CV/050PG CTET25CC/050PG N/A
75 CTET12CV/075PG CTET25CC/075PG CTET50CC/075PG
100 CTET12CV/100PG CTET25CC/100PG CTET50CC/100PG
150 CTET12CV/150PG CTET25CC/150PG CTET50CC/150PG
225 CTET12CV/225PG CTET25CC/225PG CTET50CC/225PG
300 CTET18CV/300PG CTET25CC/300PG CTET50CC/300PG
450 N/A CTET25CC/450PG CTET50CC/450PG
600 N/A CTET25CC/600PG CTET50CC/600PG
750 N/A N/A CTET50CC/750PG
900 N/A N/A CTET50CC/900PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cable tray systemsCable tray systems
95
47
Cable tray systemsCover - unequal tee (made to order)
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 5 fixing clamps and fasteners
Cover - reducer
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 4 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty mmW1 W2
75 50 CTSRCV12/0075/0050PG CTSRCC25/0075/0050PG N/A
100 50 CTSRCV12/0100/0050PG CTSRCC25/0100/0050PG N/A
150 50 CTSRCV12/0150/0050PG CTSRCC25/0150/0050PG N/A
225 50 CTSRCV12/0225/0050PG CTSRCC25/0225/0050PG N/A
300 50 N/A CTSRCC25/0300/0050PG N/A
450 50 N/A CTSRCC25/0450/0050PG N/A
600 50 N/A CTSRCC25/0600/0050PG N/A
750 50 N/A N/A N/A
900 50 N/A N/A N/A
100 75 CTSRCV12/0100/0075PG CTSRCC25/0100/0075PG CTSRCC50/0100/0075PG
150 75 CTSRCV12/0150/0075PG CTSRCC25/0150/0075PG CTSRCC50/0150/0075PG
225 75 CTSRCV12/0225/0075PG CTSRCC25/0225/0075PG CTSRCC50/0225/0075PG
300 75 CTSRCV18/0300/0075PG CTSRCC25/0300/0075PG CTSRCC50/0300/0075PG
450 75 N/A CTSRCC25/0450/0075PG CTSRCC50/0450/0075PG
600 75 N/A CTSRCC25/0600/0075PG CTSRCC50/0600/0075PG
750 75 N/A N/A CTSRCC50/0750/0075PG
900 75 N/A N/A CTSRCC50/0900/0075PG
150 100 CTSRCV12/0150/0100PG CTSRCC25/0150/0100PG CTSRCC50/0150/0100PG
225 100 CTSRCV12/0225/0100PG CTSRCC25/0225/0100PG CTSRCC50/0225/0100PG
300 100 CTSRCV18/0300/0100PG CTSRCC25/0300/0100PG CTSRCC50/0300/0100PG
450 100 N/A CTSRCC25/0450/0100PG CTSRCC50/0450/0100PG
600 100 N/A CTSRCC25/0600/0100PG CTSRCC50/0600/0100PG
750 100 N/A N/A CTSRCC50/0750/0100PG
900 100 N/A N/A CTSRCC50/0900/0100PG
225 150 CTSRCV12/0225/0150PG CTSRCC25/0225/0150PG CTSRCC50/0225/0150PG
300 150 CTSRCV18/0300/0150PG CTSRCC25/0300/0150PG CTSRCC50/0300/0150PG
450 150 N/A CTSRCC25/0450/0150PG CTSRCC50/0450/0150PG
600 150 N/A CTSRCC25/0600/0150PG CTSRCC50/0600/0150PG
750 150 N/A N/A CTSRCC50/0750/0150PG
900 150 N/A N/A CTSRCC50/0900/0150PG
300 225 CTSRCV18/0300/0225PG CTSRCC25/0300/0225PG CTSRCC50/0300/0225PG
450 225 N/A CTSRCC25/0450/0225PG CTSRCC50/0450/0225PG
600 225 N/A CTSRCC25/0600/0225PG CTSRCC50/0600/0225PG
750 225 N/A N/A CTSRCC50/0750/0225PG
900 225 N/A N/A CTSRCC50/0900/0225PG
450 300 N/A CTSRCC25/0450/0300PG CTSRCC50/0450/0300PG
600 300 N/A CTSRCC25/0600/0300PG CTSRCC50/0600/0300PG
750 300 N/A N/A CTSRCC50/0750/0300PG
900 300 N/A N/A CTSRCC50/0900/0300PG
600 450 N/A CTSRCC25/0600/0450PG CTSRCC50/0600/0450PG
750 450 N/A N/A CTSRCC50/0750/0450PG
900 450 N/A N/A CTSRCC50/0900/0450PG
750 600 N/A N/A CTSRCC50/0750/0600PG
900 600 N/A N/A CTSRCC50/0900/0600PG
900 750 N/A N/A CTSRCC50/0900/0750PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cable tray systemsCable tray systems
W1W2
W1
W2
How to generate the part number - CTUT (cover type) (depth)/W1/W2(finish)Example - CTUT CC 25/300/150PGTable below shows a complete list of W1 and W2 combinations.
W1 W2 W1 W2 W1 W2 W1 W2
50 75 100 450 300 75 600 450
50 100 100 600 300 100 600 750
50 150 100 750 300 150 600 900
50 225 100 900 300 225 750 50
50 300 150 50 300 450 750 75
50 450 150 75 300 600 750 100
50 600 150 100 300 750 750 150
50 750 150 225 300 900 750 225
50 900 150 300 450 50 750 300
75 50 150 450 450 75 750 450
75 100 150 600 450 100 750 600
75 150 150 750 450 150 750 900
75 225 150 900 450 225 900 50
75 300 225 50 450 300 900 75
75 450 225 75 450 600 900 100
75 600 225 100 450 750 900 150
75 750 225 150 450 900 900 225
75 900 225 300 600 50 900 300
100 50 225 450 600 75 900 450
100 75 225 600 600 100 900 600
100 150 225 750 600 150 900 750
100 225 225 900 600 225
100 300 300 50 600 300
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
96
Cable tray systems
46
Cover - unequal tee (made to order)
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 5 fixing clamps and fasteners
Cover - reducer
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 4 fixing clamps and fasteners
Width Light duty Medium duty Heavy duty mmW1 W2
75 50 CTSRCV12/0075/0050PG CTSRCC25/0075/0050PG N/A
100 50 CTSRCV12/0100/0050PG CTSRCC25/0100/0050PG N/A
150 50 CTSRCV12/0150/0050PG CTSRCC25/0150/0050PG N/A
225 50 CTSRCV12/0225/0050PG CTSRCC25/0225/0050PG N/A
300 50 N/A CTSRCC25/0300/0050PG N/A
450 50 N/A CTSRCC25/0450/0050PG N/A
600 50 N/A CTSRCC25/0600/0050PG N/A
750 50 N/A N/A N/A
900 50 N/A N/A N/A
100 75 CTSRCV12/0100/0075PG CTSRCC25/0100/0075PG CTSRCC50/0100/0075PG
150 75 CTSRCV12/0150/0075PG CTSRCC25/0150/0075PG CTSRCC50/0150/0075PG
225 75 CTSRCV12/0225/0075PG CTSRCC25/0225/0075PG CTSRCC50/0225/0075PG
300 75 CTSRCV18/0300/0075PG CTSRCC25/0300/0075PG CTSRCC50/0300/0075PG
450 75 N/A CTSRCC25/0450/0075PG CTSRCC50/0450/0075PG
600 75 N/A CTSRCC25/0600/0075PG CTSRCC50/0600/0075PG
750 75 N/A N/A CTSRCC50/0750/0075PG
900 75 N/A N/A CTSRCC50/0900/0075PG
150 100 CTSRCV12/0150/0100PG CTSRCC25/0150/0100PG CTSRCC50/0150/0100PG
225 100 CTSRCV12/0225/0100PG CTSRCC25/0225/0100PG CTSRCC50/0225/0100PG
300 100 CTSRCV18/0300/0100PG CTSRCC25/0300/0100PG CTSRCC50/0300/0100PG
450 100 N/A CTSRCC25/0450/0100PG CTSRCC50/0450/0100PG
600 100 N/A CTSRCC25/0600/0100PG CTSRCC50/0600/0100PG
750 100 N/A N/A CTSRCC50/0750/0100PG
900 100 N/A N/A CTSRCC50/0900/0100PG
225 150 CTSRCV12/0225/0150PG CTSRCC25/0225/0150PG CTSRCC50/0225/0150PG
300 150 CTSRCV18/0300/0150PG CTSRCC25/0300/0150PG CTSRCC50/0300/0150PG
450 150 N/A CTSRCC25/0450/0150PG CTSRCC50/0450/0150PG
600 150 N/A CTSRCC25/0600/0150PG CTSRCC50/0600/0150PG
750 150 N/A N/A CTSRCC50/0750/0150PG
900 150 N/A N/A CTSRCC50/0900/0150PG
300 225 CTSRCV18/0300/0225PG CTSRCC25/0300/0225PG CTSRCC50/0300/0225PG
450 225 N/A CTSRCC25/0450/0225PG CTSRCC50/0450/0225PG
600 225 N/A CTSRCC25/0600/0225PG CTSRCC50/0600/0225PG
750 225 N/A N/A CTSRCC50/0750/0225PG
900 225 N/A N/A CTSRCC50/0900/0225PG
450 300 N/A CTSRCC25/0450/0300PG CTSRCC50/0450/0300PG
600 300 N/A CTSRCC25/0600/0300PG CTSRCC50/0600/0300PG
750 300 N/A N/A CTSRCC50/0750/0300PG
900 300 N/A N/A CTSRCC50/0900/0300PG
600 450 N/A CTSRCC25/0600/0450PG CTSRCC50/0600/0450PG
750 450 N/A N/A CTSRCC50/0750/0450PG
900 450 N/A N/A CTSRCC50/0900/0450PG
750 600 N/A N/A CTSRCC50/0750/0600PG
900 600 N/A N/A CTSRCC50/0900/0600PG
900 750 N/A N/A CTSRCC50/0900/0750PG
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cable tray systemsCable tray systems
W1W2
W1
W2
How to generate the part number - CTUT (cover type) (depth)/W1/W2(finish)Example - CTUT CC 25/300/150PGTable below shows a complete list of W1 and W2 combinations.
W1 W2 W1 W2 W1 W2 W1 W2
50 75 100 450 300 75 600 450
50 100 100 600 300 100 600 750
50 150 100 750 300 150 600 900
50 225 100 900 300 225 750 50
50 300 150 50 300 450 750 75
50 450 150 75 300 600 750 100
50 600 150 100 300 750 750 150
50 750 150 225 300 900 750 225
50 900 150 300 450 50 750 300
75 50 150 450 450 75 750 450
75 100 150 600 450 100 750 600
75 150 150 750 450 150 750 900
75 225 150 900 450 225 900 50
75 300 225 50 450 300 900 75
75 450 225 75 450 600 900 100
75 600 225 100 450 750 900 150
75 750 225 150 450 900 900 225
75 900 225 300 600 50 900 300
100 50 225 450 600 75 900 450
100 75 225 600 600 100 900 600
100 150 225 750 600 150 900 750
100 225 225 900 600 225
100 300 300 50 600 300
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
97
49
Cable tray systemsCover - 90º internal riser
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 8 fixing clamps and fasteners
Width Light duty Medium duty Heavy dutymm
50 CTIR12CV/0050PG90 CTIR25CC/0050PG90 N/A
75 CTIR12CV/0075PG90 CTIR25CC/0075PG90 CTIR50CC/0075PG90
100 CTIR12CV/0100PG90 CTIR25CC/0100PG90 CTIR50CC/0100PG90
150 CTIR12CV/0150PG90 CTIR25CC/0150PG90 CTIR50CC/0150PG90
225 CTIR12CV/0225PG90 CTIR25CC/0225PG90 CTIR50CC/0225PG90
300 CTIR18CV/0300PG90 CTIR25CC/0300PG90 CTIR50CC/0300PG90
450 N/A CTIR25CC/0450PG90 CTIR50CC/0450PG90
600 N/A CTIR25CC/0600PG90 CTIR50CC/0600PG90
750 N/A N/A CTIR50CC/0750PG90
900 N/A N/A CTIR50CC/0900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cover - 90º external riser
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 8 fixing clamps and fasteners
Width Light duty Medium duty Heavy dutymm
50 CTER12CV/0050PG90 CTER25CC/0050PG90 N/A
75 CTER12CV/0075PG90 CTER25CC/0075PG90 CTER50CC/0075PG90
100 CTER12CV/0100PG90 CTER25CC/0100PG90 CTER50CC/0100PG90
150 CTER12CV/0150PG90 CTER25CC/0150PG90 CTER50CC/0150PG90
225 CTER12CV/0225PG90 CTER25CC/0225PG90 CTER50CC/0225PG90
300 CTER18CV/0300PG90 CTER25CC/0300PG90 CTER50CC/0300PG90
450 N/A CTER25CC/0450PG90 CTER50CC/0450PG90
600 N/A CTER25CC/0600PG90 CTER50CC/0600PG90
750 N/A N/A CTER50CC/0750PG90
900 N/A N/A CTER50CC/0900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Stand off brackets
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Widthmm
50 CTSO050PG
75 CTSO075PG
100 CTSO100PG
150 CTSO150PG
225 CTSO225PG
300 CTSO300PG
450 CTSO450PG
600 CTSO600PG
750 CTSO750PG
900 CTSO900PG
Hanger brackets
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Widthmm
50 CTHB050/PG
75 CTHB075/PG
100 CTHB100/PG
150 CTHB150/PG
Straight divider - 3m
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Tray depthmm
25 CTDI025PG3
50 CTDI050PG3
Earthing straps
Finish: electro-tinned
Use M6 x 12 roofing bolts Supplied in packs of 10
CT/ES100
Copper braid electro tinned 4mm2, 100mm long
Roofing bolts and nuts
Finish: BZP as standard, stainless steel grade 316 = SS
M6 x 12 roofing bolts
Supplied in packs of 100
M06X12RB
Cable tray systemsCable tray systems
98
Cable tray systems
48
Cover - 90º internal riser
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 8 fixing clamps and fasteners
Width Light duty Medium duty Heavy dutymm
50 CTIR12CV/0050PG90 CTIR25CC/0050PG90 N/A
75 CTIR12CV/0075PG90 CTIR25CC/0075PG90 CTIR50CC/0075PG90
100 CTIR12CV/0100PG90 CTIR25CC/0100PG90 CTIR50CC/0100PG90
150 CTIR12CV/0150PG90 CTIR25CC/0150PG90 CTIR50CC/0150PG90
225 CTIR12CV/0225PG90 CTIR25CC/0225PG90 CTIR50CC/0225PG90
300 CTIR18CV/0300PG90 CTIR25CC/0300PG90 CTIR50CC/0300PG90
450 N/A CTIR25CC/0450PG90 CTIR50CC/0450PG90
600 N/A CTIR25CC/0600PG90 CTIR50CC/0600PG90
750 N/A N/A CTIR50CC/0750PG90
900 N/A N/A CTIR50CC/0900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Cover - 90º external riser
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SSStandard closed covers = CC, ventilated cover = CVIncludes 8 fixing clamps and fasteners
Width Light duty Medium duty Heavy dutymm
50 CTER12CV/0050PG90 CTER25CC/0050PG90 N/A
75 CTER12CV/0075PG90 CTER25CC/0075PG90 CTER50CC/0075PG90
100 CTER12CV/0100PG90 CTER25CC/0100PG90 CTER50CC/0100PG90
150 CTER12CV/0150PG90 CTER25CC/0150PG90 CTER50CC/0150PG90
225 CTER12CV/0225PG90 CTER25CC/0225PG90 CTER50CC/0225PG90
300 CTER18CV/0300PG90 CTER25CC/0300PG90 CTER50CC/0300PG90
450 N/A CTER25CC/0450PG90 CTER50CC/0450PG90
600 N/A CTER25CC/0600PG90 CTER50CC/0600PG90
750 N/A N/A CTER50CC/0750PG90
900 N/A N/A CTER50CC/0900PG90
*NB. Closed cover not available for 12mm and 18mm deep cable tray.
Stand off brackets
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Widthmm
50 CTSO050PG
75 CTSO075PG
100 CTSO100PG
150 CTSO150PG
225 CTSO225PG
300 CTSO300PG
450 CTSO450PG
600 CTSO600PG
750 CTSO750PG
900 CTSO900PG
Hanger brackets
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Widthmm
50 CTHB050/PG
75 CTHB075/PG
100 CTHB100/PG
150 CTHB150/PG
Straight divider - 3m
Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 316 = SS
Tray depthmm
25 CTDI025PG3
50 CTDI050PG3
Earthing straps
Finish: electro-tinned
Use M6 x 12 roofing bolts Supplied in packs of 10
CT/ES100
Copper braid electro tinned 4mm2, 100mm long
Roofing bolts and nuts
Finish: BZP as standard, stainless steel grade 316 = SS
M6 x 12 roofing bolts
Supplied in packs of 100
M06X12RB
Cable tray systemsCable tray systems
99
CABLE TRAYS
KBSI
KBS
KGI / KG
NATO
CABLE TRAYS
100
CABLE TRAYS
101
CABLE TRAYS
KBSI 35Cable tray with interlocking ends
Interlocking ends Alternative perforations Return flangesOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
- KBSI 35*075*0.75 35 75 0.750 3000 0.810 60 P m- KBSI 35*075*1.00 35 75 1.000 3000 1.080 60 P m- KBSI 35*100*0.75 35 100 0.750 3000 0.930 60 P m- KBSI 35*100*1.00 35 100 1.000 3000 1.240 60 P m- KBSI 35*150*0.75 35 150 0.750 3000 1.170 60 P m- KBSI 35*150*1.00 35 150 1.000 3000 1.560 60 P m- KBSI 35*200*0.75 35 200 0.750 3000 1.420 60 P m- KBSI 35*200*1.00 35 200 1.000 3000 1.890 60 P m- KBSI 35*300*0.75 35 300 0.750 3000 1.910 60 P m- KBSI 35*300*1.00 35 300 1.000 3000 2.540 60 P m
To fix with:
- KBV - - - - 0.010 96 P piece
LOAD DIAGRAM Graph valid for KBSI 35. This diagram illustrates the permissible uniformly distributed loads applied to multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span. F = max. admissible load (daN/m) L = support distance (m) Max. deflection (m) = L/100
CHARACTERISTICS Embedded perforations for : - extra load capacity - better aeration - better stability - better condensation drainage Alternative perforations for : - better fixation on the supports - very useful for cable fixation. Earthing. TECHNICAL INFORMATION The perforation scheme differs according to the width. The surface of the interlocking end is rounded in order to protect the cables. Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland.
& CLICKQUICK
102
CABLE TRAYS
KBSI 60Cable tray with interlocking ends
Interlocking ends Alternative perforations Return flangesOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD KBSI 60*075*0.75 60 75 0.750 3000 1.050 60 P m- KBSI 60*075*1.00 60 75 1.000 3000 1.400 60 P m- KBSI 60*075*1.25 60 75 1.250 3000 1.750 60 P m
HD KBSI 60*100*0.75 60 100 0.750 3000 1.170 60 P mHD KBSI 60*100*1.00 60 100 1.000 3000 1.560 60 P m
- KBSI 60*100*1.25 60 100 1.250 3000 1.950 60 P mHD KBSI 60*150*0.75 60 150 0.750 3000 1.420 30 P mHD KBSI 60*150*1.00 60 150 1.000 3000 1.890 30 P m
- KBSI 60*150*1.25 60 150 1.250 3000 2.360 30 P mHD KBSI 60*200*0.75 60 200 0.750 3000 1.660 30 P mHD KBSI 60*200*1.00 60 200 1.000 3000 2.220 30 P m
- KBSI 60*200*1.25 60 200 1.250 3000 2.770 30 P mHD KBSI 60*250*0.75 60 250 0.750 3000 1.910 30 P m
- KBSI 60*250*1.00 60 250 1.000 3000 2.540 30 P mHD KBSI 60*300*0.75 60 300 0.750 3000 2.150 30 P mHD KBSI 60*300*1.00 60 300 1.000 3000 2.870 30 P m
- KBSI 60*300*1.25 60 300 1.250 3000 3.580 30 P mHD KBSI 60*400*1.00 60 400 1.000 3000 3.520 30 P m
- KBSI 60*400*1.25 60 400 1.250 3000 4.400 30 P mHD KBSI 60*500*1.00 60 500 1.000 3000 4.170 30 P m
- KBSI 60*500*1.25 60 500 1.250 3000 5.210 30 P m- KBSI 60*600*1.00 60 600 1.000 3000 4.820 30 P m- KBSI 60*600*1.25 60 600 1.250 3000 6.030 30 P m
To fix with:
- KBV - - - - 0.010 96 P piece
LOAD DIAGRAM Graph valid for KBSI 60. This diagram illustrates the permissible uniformly distributed loads applied to multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span. F = max. admissible load (daN/m) L = support distance (m) Max. deflection (m) = L/100
More technical specifications for this product can be found at the end of this chapter.Other lengths min. 1.80 m / max. 6 m for each run of 100 mm.
& CLICKQUICK
103
CABLE TRAYS
KBSI 60*6Cable tray with interlocking ends
Interlocking ends Alternative perforations Return flangesOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
- KBSI 60*075*1.00*6 60 75 1.000 6000 1.400 60 P m- KBSI 60*100*1.00*6 60 100 1.000 6000 1.560 60 P m- KBSI 60*150*1.00*6 60 150 1.000 6000 1.890 30 P m- KBSI 60*200*1.00*6 60 200 1.000 6000 2.220 30 P m- KBSI 60*300*1.00*6 60 300 1.000 6000 2.870 30 P m- KBSI 60*400*1.00*6 60 400 1.000 6000 3.520 30 P m
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P piece
LOAD DIAGRAM Graph valid for KBSI 60*6. This diagram illustrates the permissible uniformly distributed loads applied to multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span. F = max. admissible load (daN/m) L = support distance (m) Max. deflection (m) = L/100
Other lengths on request : min. 1.80 m / max. 6 m per steps of 100 mm. CHARACTERISTICS Embedded perforations for : - extra load capacity - better aeration - better stability - better condensation drainage Alternative perforations for : - better fixation on the supports - very useful for cable fixation. Earthing. TECHNICAL INFORMATION The perforation scheme differs according to the width. Alternative perforation beginning at width 200 mm. The surface of the interlocking end is rounded in order to protect the cables. Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland. Separation ‘SLIS 60’ can be used on any width from 200 mm.
104
CABLE TRAYS
KBS 35Perforated cable tray
Alternative perforation Return flangesOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD KBS 35*050*0.75 35 50 0.750 3000 0.680 150 P mHD KBS 35*050*1.00 35 50 1.000 3000 0.920 150 P mHD KBS 35*075*0.75 35 75 0.750 3000 0.810 60 P mHD KBS 35*075*1.00 35 75 1.000 3000 1.080 60 P mHD KBS 35*100*0.75 35 100 0.750 3000 0.930 60 P mHD KBS 35*100*1.00 35 100 1.000 3000 1.240 60 P mHD KBS 35*150*0.75 35 150 0.750 3000 1.170 60 P mHD KBS 35*150*1.00 35 150 1.000 3000 1.560 60 P mHD KBS 35*200*0.75 35 200 0.750 3000 1.420 60 P mHD KBS 35*200*1.00 35 200 1.000 3000 1.890 60 P mHD KBS 35*300*0.75 35 300 0.750 3000 1.910 60 P mHD KBS 35*300*1.00 35 300 1.000 3000 2.540 60 P mHD KBS 35*400*1.00 35 400 1.000 3000 3.190 60 P m
- KBS 35*500*1.00 35 500 1.000 3000 3.840 60 P m- KBS 35*600*1.00 35 600 1.000 3000 4.500 60 P m
To fix with:
- V 35 27 180 - - 0.050 48 P pieceHD V 35*200 25 200 - - 0.040 48 P piece
LOAD DIAGRAM Graph valid for KBS 35. This diagram illustrates the permissible uniformly distributed loads applied to multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span. F = max. admissible load (daN/m) L = support distance (m) Max. deflection (m) = L/100
CHARACTERISTICS Embedded perforations for : - extra load capacity - better aeration - better stability - better condensation drainage Alternative perforations for : - better fixation on the supports - very useful for cable fixation TECHNICAL INFORMATION The perforation scheme differs according to the width. Alternative perforation beginning at 200 mm. Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland. KBS 35*050*0.75 en KBS 35*050*1.00: no knock-out facility (pre-shaped holes).
105
CABLE TRAYS
KBS 60Perforated cable tray
Alternative perforation Return flangesOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD KBS 60*050*0.75 60 50 0.750 3000 0.930 60 P mHD KBS 60*050*1.00 60 50 1.000 3000 1.240 60 P mHD KBS 60*075*1.00 60 75 1.000 3000 1.400 60 P mHD KBS 60*075*1.25 60 75 1.250 3000 1.750 60 P mHD KBS 60*100*1.00 60 100 1.000 3000 1.560 60 P mHD KBS 60*100*1.25 60 100 1.250 3000 1.950 60 P mHD KBS 60*100*1.50 60 100 1.500 3000 2.350 60 P mHD KBS 60*150*1.00 60 150 1.000 3000 1.890 30 P mHD KBS 60*150*1.25 60 150 1.250 3000 2.360 30 P mHD KBS 60*150*1.50 60 150 1.500 3000 2.830 30 P mHD KBS 60*200*1.00 60 200 1.000 3000 2.220 30 P mHD KBS 60*200*1.25 60 200 1.250 3000 2.770 30 P mHD KBS 60*200*1.50 60 200 1.500 3000 3.320 30 P mHD KBS 60*250*1.00 60 250 1.000 3000 2.540 30 P mHD KBS 60*300*1.00 60 300 1.000 3000 2.870 30 P mHD KBS 60*300*1.25 60 300 1.250 3000 3.580 30 P mHD KBS 60*300*1.50 60 300 1.500 3000 4.300 30 P mHD KBS 60*400*1.00 60 400 1.000 3000 3.520 30 P mHD KBS 60*400*1.25 60 400 1.250 3000 4.400 30 P mHD KBS 60*400*1.50 60 400 1.500 3000 5.280 30 P mHD KBS 60*500*1.00 60 500 1.000 3000 4.170 30 P mHD KBS 60*500*1.25 60 500 1.250 3000 5.210 30 P mHD KBS 60*500*1.50 60 500 1.500 3000 6.250 30 P mHD KBS 60*600*1.25 60 600 1.250 3000 6.030 30 P mHD KBS 60*600*1.50 60 600 1.500 3000 7.230 30 P m
To fix with:
HD V 60*200 50 200 - - 0.080 48 P piece- V 60 52 180 - - 0.090 48 P piece
LOAD DIAGRAM Graph valid for KBS 60. This diagram illustrates the permissible uniformly distributed loads applied to multiple supports. They comply with IEC 61537 par 10.3.3. test type III with connection to 1/5 of the span. F = max. admissible load (daN/m) L = support distance (m) Max. deflection (m) = L/100
Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland. KBS 60*050*0.75 and KBS 60*050*1.00: No knock-out facility (pre-shaped holes).
106
CABLE TRAYS
KBS 85Perforated cable tray
Alternative perforation Return flangesOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD KBS 85*100*1.00 85 100 1.000 3000 1.890 24 P mHD KBS 85*150*1.00 85 150 1.000 3000 2.220 24 P mHD KBS 85*200*1.00 85 200 1.000 3000 2.540 24 P mHD KBS 85*300*1.00 85 300 1.000 3000 3.190 24 P mHD KBS 85*400*1.00 85 400 1.000 3000 3.840 24 P mHD KBS 85*400*1.50 85 400 1.500 3000 5.770 24 P mHD KBS 85*500*1.25 85 500 1.250 3000 5.620 24 P mHD KBS 85*500*1.50 85 500 1.500 3000 6.740 24 P mHD KBS 85*600*1.25 85 600 1.250 3000 6.430 24 P mHD KBS 85*600*1.50 85 600 1.500 3000 7.720 24 P m
To fix with:
- V 85 77 180 - - 0.130 48 P pieceHD V 85*200 75 200 - - 0.130 48 P piece
LOAD DIAGRAM Graph valid for KBS 85. This diagram illustrates the permissible uniformly distributed loads applied to multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span. F = max. admissible load (daN/m) L = support distance (m) Max. deflection (m) = L/100
CHARACTERISTICS Embedded perforations for : - extra load capacity - better aeration - better stability - better condensation drainage Alternative perforations for : - better fixation on the supports - very useful for cable fixation TECHNICAL INFORMATION The perforation scheme differs according to the width. Alternative perforation beginning at 200 mm. Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland.
107
CABLE TRAYS
KBS 110Perforated cable tray
Alternative perforation Return flangesOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD KBS 110*150*1.25 110 150 1.250 3000 3.180 24 P mHD KBS 110*200*1.25 110 200 1.250 3000 3.580 24 P mHD KBS 110*300*1.25 110 300 1.250 3000 4.400 24 P mHD KBS 110*400*1.25 110 400 1.250 3000 5.210 24 P mHD KBS 110*500*1.25 110 500 1.250 3000 6.030 24 P mHD KBS 110*500*1.50 110 500 1.500 3000 7.230 24 P mHD KBS 110*600*1.25 110 600 1.250 3000 6.840 24 P mHD KBS 110*600*1.50 110 600 1.500 3000 8.210 24 P m
To fix with:
HD V 110*200 100 200 - - 0.170 48 P piece
LOAD DIAGRAM Graph valid for KBS 110. This diagram illustrates the permissible uniformly distributed loads applied to multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span. F = max. admissible load (daN/m) L = support distance (m) Max. deflection (m) = L/100
CHARACTERISTICS Embedded perforations for : - extra load capacity - better aeration - better stability - better condensation drainage Alternative perforations for : - better fixation on the supports - very useful for cable fixation TECHNICAL INFORMATION The perforation scheme differs according to the width. Alternative perforation beginning at 200 mm. Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland.
108
CABLE TRAYS
KBS 110*6Perforated cable tray
Alternative perforation Return flanges Support distance up to 6 meterOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD KBS 110*200*1.50*6 110 200 1.500 6000 4.300 24 P mHD KBS 110*300*1.50*6 110 300 1.500 6000 5.280 24 P mHD KBS 110*400*1.50*6 110 400 1.500 6000 6.250 24 P mHD KBS 110*500*1.50*6 110 500 1.500 6000 7.230 24 P mHD KBS 110*600*1.50*6 110 600 1.500 6000 8.210 24 P m
To fix with:
HD KPW 115 400 - - 0.590 24 P piece
LOAD DIAGRAM Graph valid for KBS 110*6. This diagram illustrates the permissible uniformly distributed loads applied to multiple supports. They comply with IEC 61537 par 10.3.3 test type III . F = max. admissible load (daN/m) L = support distance (m) Max. deflection (m) = L/200
CHARACTERISTICS Embedded perforations for : - extra load capacity - better aeration - better stability - better condensation drainage Alternative perforations for : - better fixation on the supports - very useful for cable fixation TECHNICAL INFORMATION The perforation scheme differs according to the width. Alternative perforation beginning at 200 mm. Round holes of Ø 16 mm and Ø 19.5 mm provided as opening for the fitting of a gland.
109
CABLE TRAYS
KBSM(I)Cable tray machine constr. interl. ends
Alternative perforation Return flangesOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
- KBSM 60*050*1.00 60 50 1.000 3000 1.240 3 P m- KBSMI 60*075*1.00 60 75 1.000 3000 1.400 3 P m- KBSMI 60*100*1.00 60 100 1.000 3000 1.560 3 P m- KBSMI 60*150*1.00 60 150 1.000 3000 1.890 3 P m- KBSMI 60*200*1.00 60 200 1.000 3000 2.200 3 P m- KBSMI 60*300*1.00 60 300 1.000 3000 2.870 3 P m
- Cable tray machine constructions, interlocking from width 75 mm (connect width 50 mm with jointing plate) - Large cable outlet (dimensions 30x50 mm) with round corners - Distance between cable outlets: bottom = 150 mm, sides = 300 mm - Edge protection RBKBSM to order separately - Round cable gland central to the bottom, alternately M16/M20 - The cable outlet holes allow the cable trays to be used in machine constructions, especially in the field of internal transport - Can be used as lighting rail by immediately connecting through bottom perforations M16 and M20 - Staggered slots in sides and bottom for easy connection with accessories - To be used with standard accessories, such as the cover with swerve clamp
KGI 60Cable tray not perforated, interlocking
Not perforated Return flangesOn Demand Height 35 mm On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD KGI 60*075*1.00 60 75 1.000 3000 1.700 3 P mHD KGI 60*100*1.00 60 100 1.000 3000 1.900 3 P mHD KGI 60*150*1.00 60 150 1.000 3000 2.300 3 P mHD KGI 60*200*1.00 60 200 1.000 3000 2.700 3 P mHD KGI 60*250*1.00 60 250 1.000 3000 3.100 3 P mHD KGI 60*300*1.00 60 300 1.000 3000 3.500 3 P m
- KGI 60*300*1.25 60 300 1.250 3000 4.300 3 P mHD KGI 60*400*1.00 60 400 1.000 3000 4.300 3 P m
- KGI 60*400*1.25 60 400 1.250 3000 5.300 3 P m- KGI 60*500*1.25 60 500 1.250 3000 6.300 3 P m- KGI 60*600*1.25 60 600 1.250 3000 7.300 3 P m
To fix with:
- KBV - - - - 0.010 96 P piece
& CLICKQUICK
110
CABLE TRAYS
LOAD DIAGRAM Graph valid for KGI 60. This diagram illustrates the permissible uniformly distributed loads applied to multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span. F = max. admissible load (daN/m) L = support distance (m) Max. deflection (m) = L/100
KG 110Cable tray not perforated
Not perforated Return flangesOn Demand Height 85 mm On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD KG 110*100*1.50 110 100 1.500 3000 4.000 18 P mHD KG 110*150*1.50 110 150 1.500 3000 4.590 18 P mHD KG 110*200*1.50 110 200 1.500 3000 5.180 18 P mHD KG 110*300*1.50 110 300 1.500 3000 6.360 18 P mHD KG 110*400*1.50 110 400 1.500 3000 7.540 18 P mHD KG 110*500*1.50 110 500 1.500 3000 8.710 18 P mHD KG 110*600*1.50 110 600 1.500 3000 9.890 18 P m
To fix with:
HD V 110*200 100 200 - - 0.170 48 P piece
LOAD DIAGRAM Graph valid for KG 110. This diagram illustrates the permissible uniformly distributed loads applied to multiple supports. They comply with IEC 61537 par 10.3.3 test type III with connection to 1/5 of the span. F = max. admissible load (daN/m) L = support distance (m) Max. deflection (m) = L/100
111
CABLE TRAYS
NATO 15Perforated cable tray - upright flanges
Linear and alternative perforations Upright flangesOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD NATO 15*050*1.25 15 50 1.250 2000 0.730 40 P mHD NATO 15*100*1.25 15 100 1.250 2000 1.050 20 P mHD NATO 15*150*1.25 15 150 1.250 2000 1.350 20 P mHD NATO 15*200*1.25 15 200 1.250 2000 1.700 20 P mHD NATO 15*300*1.25 15 300 1.250 2000 2.400 20 P m
To fix with:
HD V 15*200 20 150 - - 0.050 48 P piece
LOAD DIAGRAM Graph valid for NATO 15, mounted in continuous span with the jointing plates 1/5 away from the supports. Safety factor = 2. F = max. admissible load (daN/m) L = support distance (m) L/200 = deflection (m)
DUniversal cover
Especially used for horizontal en vertical sectionsOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD D 050 10 50 - 3000 0.350 3 P mHD D 075 10 75 - 2000 0.500 10 P mHD D 100 10 100 - 2000 0.820 10 P mHD D 150 10 150 - 2000 1.170 10 P mHD D 200 10 200 - 2000 1.420 10 P mHD D 250 10 250 - 2000 1.850 10 P mHD D 300 10 300 - 2000 2.100 10 P mHD D 400 10 400 - 2000 4.150 10 P mHD D 500 10 500 - 2000 5.000 10 P mHD D 600 10 600 - 2000 5.650 10 P m
To fix with:
- DCO - - - - 0.010 96 P piece- DCL - - - - 0.010 96 P piece
Covers with width > 400 mm are delivered with diagonal reinforcements.
112
CABLE TRAYS
DCOLid clamp
Standard finish Spring steel
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
- DCO - - - - 0.010 96 P piece
2 pieces per meter.
DCLLid clamp clips
Standard finish Stainless Steel 316
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
- DCL - - - - 0.010 96 P piece
2 pieces per meter. Not applicable for KG.
& CLICKQUICK
& CLICKQUICK
113
CABLE TRAYS
B 90Horizontal bend 90°
Slides over the cable traysRadius 100 mmOn Demand Height 35mm - 85mm - 110mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
W 50 75 100 150 200 250 300 400 500 600A 255 280 305 355 405 455 505 605 705 805B 255 280 305 355 405 455 505 605 705 805
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD B 90*60*050 60 50 - - 0.480 1 P pieceHD B 90*60*075 60 75 - - 0.520 1 P pieceHD B 90*60*100 60 100 - - 0.740 1 P pieceHD B 90*60*150 60 150 - - 0.830 1 P pieceHD B 90*60*200 60 200 - - 1.380 1 P pieceHD B 90*60*250 60 250 - - 1.860 1 P pieceHD B 90*60*300 60 300 - - 2.300 1 P pieceHD B 90*60*400 60 400 - - 2.960 1 P pieceHD B 90*60*500 60 500 - - 5.430 1 P pieceHD B 90*60*600 60 600 - - 6.690 1 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
More technical specifications for this product can be found at the end of this chapter.Minimum number bolts and nuts VM 6*10: 8 pieces.
114
CABLE TRAYS
DB 90Cover for horizontal bend 90°
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
50 75 100 150 200 250 300 400 500 600B 256 281 306 356 406 456 506 606 706 806
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD DB 90*050 10 56 - - 0.520 1 P pieceHD DB 90*075 10 81 - - 0.620 1 P pieceHD DB 90*100 10 106 - - 0.730 1 P pieceHD DB 90*150 10 156 - - 0.980 1 P pieceHD DB 90*200 10 206 - - 1.260 1 P pieceHD DB 90*250 10 256 - - 1.590 1 P pieceHD DB 90*300 10 306 - - 1.950 1 P pieceHD DB 90*400 10 406 - - 2.780 1 P pieceHD DB 90*500 10 506 - - 3.750 1 P pieceHD DB 90*600 10 606 - - 4.880 1 P piece
To fix with:
- DCL - - - - 0.010 96 P piece
VHAdjustable Corner 90-180°
Corner plate adjustable between 90° and 180°On Demand Height 35 mm - 85 mm - 110 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD VH 60*050 60 50 - - 0.350 1 P pieceHD VH 60*075 60 75 - - 0.350 1 P pieceHD VH 60*100 60 100 - - 0.400 1 P pieceHD VH 60*150 60 150 - - 0.500 1 P pieceHD VH 60*200 60 200 - - 0.700 1 P pieceHD VH 60*250 60 250 - - 0.900 1 P pieceHD VH 60*300 60 300 - - 1.150 1 P pieceHD VH 60*400 60 400 - - 1.700 1 P pieceHD VH 60*500 60 500 - - 2.500 1 P pieceHD VH 60*600 60 600 - - 3.450 1 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Minimum number bolts and nuts VM 6*10: 4 pieces.
115
CABLE TRAYS
THorizontal T-piece
Slides over the cable traysRadius 100 mmOn Demand Height 35 mm - 85 mm - 110 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
50 75 100 150 200 250 300 400 500 600A 458 483 508 558 608 658 708 808 908 1008
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD T 60*050 60 50 - - 0.840 1 P pieceHD T 60*075 60 75 - - 0.980 1 P pieceHD T 60*100 60 100 - - 1.130 1 P pieceHD T 60*150 60 150 - - 1.520 1 P pieceHD T 60*200 60 200 - - 1.760 1 P pieceHD T 60*250 60 250 - - 2.250 1 P pieceHD T 60*300 60 300 - - 2.590 1 P pieceHD T 60*400 60 400 - - 3.380 1 P pieceHD T 60*500 60 500 - - 6.120 1 P pieceHD T 60*600 60 600 - - 7.260 1 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Minimum number bolts and nuts VM 6*10: 12 pieces.
DTCover for horizontal T-piece
For all heightsOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD DT 050 10 56 - - 0.990 1 P pieceHD DT 075 10 81 - - 1.140 1 P pieceHD DT 100 10 106 - - 1.310 1 P pieceHD DT 150 10 156 - - 1.660 1 P pieceHD DT 200 10 206 - - 2.060 1 P pieceHD DT 250 10 256 - - 1.780 1 P pieceHD DT 300 10 306 - - 2.980 1 P pieceHD DT 400 10 406 - - 4.050 1 P pieceHD DT 500 10 506 - - 5.320 1 P pieceHD DT 600 10 606 - - 6.710 1 P piece
To fix with:
- DCL - - - - 0.010 96 P piece
116
CABLE TRAYS
ASHorizontal adapter 90°
Slides over the cable traysRadius 100 mmOn Demand Height 35 mm - 85 mm - 110 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
50 75 100 150 200 250 300 400 500 600A 458 483 508 558 608 658 708 808 908 1008
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD AS 60*050 60 50 - - 0.580 1 P pieceHD AS 60*075 60 75 - - 0.620 1 P pieceHD AS 60*100 60 100 - - 0.680 1 P pieceHD AS 60*150 60 150 - - 0.710 1 P pieceHD AS 60*200 60 200 - - 0.810 1 P pieceHD AS 60*250 60 250 - - 0.910 1 P pieceHD AS 60*300 60 300 - - 0.930 1 P pieceHD AS 60*400 60 400 - - 1.130 1 P pieceHD AS 60*500 60 500 - - 1.530 1 P pieceHD AS 60*600 60 600 - - 1.780 1 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Minimum number bolts and nuts VM 6*10: 8 pieces.
DASCover for horizontal adapter 90°
For all heightsOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD DAS 050 10 56 - - 0.820 1 P pieceHD DAS 075 10 81 - - 0.870 1 P pieceHD DAS 100 10 106 - - 0.910 1 P pieceHD DAS 150 10 156 - - 1.010 1 P pieceHD DAS 200 10 206 - - 1.090 1 P pieceHD DAS 250 10 256 - - 0.550 1 P pieceHD DAS 300 10 306 - - 1.270 1 P pieceHD DAS 400 10 406 - - 1.450 1 P pieceHD DAS 500 10 506 - - 1.630 1 P pieceHD DAS 600 10 606 - - 1.810 1 P piece
To fix with:
- DCL - - - - 0.010 96 P piece
117
CABLE TRAYS
KRCross-over
Slides over the cable traysRadius 100 mmOn Demand Height 35 mm - 85 mm - 110 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD KR 60*050 60 50 - - 1.180 1 P pieceHD KR 60*075 60 75 - - 1.560 1 P pieceHD KR 60*100 60 100 - - 1.480 1 P pieceHD KR 60*150 60 150 - - 2.080 1 P pieceHD KR 60*200 60 200 - - 2.380 1 P pieceHD KR 60*250 60 250 - - 2.760 1 P pieceHD KR 60*300 60 300 - - 3.520 1 P pieceHD KR 60*400 60 400 - - 4.610 1 P pieceHD KR 60*500 60 500 - - 5.320 1 P pieceHD KR 60*600 60 600 - - 6.160 1 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Minimum number bolts and nuts VM 6*10: 16 pieces.
DKRCover for cross-over
For all heightsOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD DKR 050 10 56 - - 0.450 1 P pieceHD DKR 075 10 81 - - 0.700 1 P pieceHD DKR 100 10 106 - - 0.770 1 P pieceHD DKR 150 10 156 - - 1.160 1 P pieceHD DKR 200 10 206 - - 1.590 1 P pieceHD DKR 250 10 256 - - 2.020 1 P pieceHD DKR 300 10 306 - - 2.480 1 P pieceHD DKR 400 10 406 - - 5.000 1 P pieceHD DKR 500 10 506 - - 6.700 1 P pieceHD DKR 600 10 606 - - 8.300 1 P piece
To fix with:
- DCL - - - - 0.010 96 P piece
118
CABLE TRAYS
SB 90Rising elbow 90°
Slides over the cable traysRadius 100 mmOn Demand Height 35 mm - 85 mm - 110 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD SB 90*60*050 60 50 - - 0.550 1 P pieceHD SB 90*60*075 60 75 - - 0.650 1 P pieceHD SB 90*60*100 60 100 - - 0.730 1 P pieceHD SB 90*60*150 60 150 - - 0.880 1 P pieceHD SB 90*60*200 60 200 - - 1.000 1 P pieceHD SB 90*60*250 60 250 - - 1.080 1 P pieceHD SB 90*60*300 60 300 - - 1.180 1 P pieceHD SB 90*60*400 60 400 - - 1.430 1 P pieceHD SB 90*60*500 60 500 - - 1.900 1 P pieceHD SB 90*60*600 60 600 - - 2.150 1 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Minimum number bolts and nuts VM 6*10: 8 pieces.
SBCLSnap-in internal rising bend 90°
Snap-in system with cable tray KBS 60 and KBSI 60Radius 100 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
- SBCL 90*60*050 60 50 - - 0.550 1 P piece- SBCL 90*60*075 60 75 - - 0.650 1 P piece- SBCL 90*60*100 60 100 - - 0.730 1 P piece- SBCL 90*60*150 60 150 - - 0.880 1 P piece- SBCL 90*60*200 60 200 - - 1.000 1 P piece- SBCL 90*60*250 60 250 - - 1.080 1 P piece- SBCL 90*60*300 60 300 - - 1.180 1 P piece- SBCL 90*60*400 60 400 - - 1.430 1 P piece- SBCL 90*60*500 60 500 - - 1.900 1 P piece- SBCL 90*60*600 60 600 - - 2.150 1 P piece
- opening for extra locking using 4x VM 6*10 - openings provided for fitting a lid - Only available in height 60 mm.
& CLICKQUICK
119
CABLE TRAYS
DSB 90Cover for rising elbow 90°
Flat banded.On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD DSB 90*050 - 50 - - 0.150 1 P pieceHD DSB 90*075 - 75 - - 0.190 1 P pieceHD DSB 90*100 - 100 - - 0.260 1 P pieceHD DSB 90*150 - 150 - - 0.390 1 P pieceHD DSB 90*200 - 200 - - 0.510 1 P pieceHD DSB 90*250 - 250 - - 0.640 1 P pieceHD DSB 90*300 - 300 - - 0.770 1 P pieceHD DSB 90*400 - 400 - - 1.030 1 P pieceHD DSB 90*500 - 500 - - 1.290 1 P pieceHD DSB 90*600 - 600 - - 1.540 1 P piece
To fix with:
- DCL - - - - 0.010 96 P piece
VB 90Low elbow 90°
Slides over the cable traysRadius 100 mmOn Demand Height 35 mm - 85 mm - 110 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD VB 90*60*050 60 50 - - 0.550 1 P pieceHD VB 90*60*075 60 75 - - 0.630 1 P pieceHD VB 90*60*100 60 100 - - 0.650 1 P pieceHD VB 90*60*150 60 150 - - 0.780 1 P pieceHD VB 90*60*200 60 200 - - 0.850 1 P pieceHD VB 90*60*250 60 250 - - 0.950 1 P pieceHD VB 90*60*300 60 300 - - 1.080 1 P pieceHD VB 90*60*400 60 400 - - 1.330 1 P pieceHD VB 90*60*500 60 500 - - 1.430 1 P pieceHD VB 90*60*600 60 600 - - 1.600 1 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Minimum number bolts and nuts VM 6*10: 8 pieces.
120
CABLE TRAYS
VBCLSnap-in external rising bend
Snap-in system with cable tray KBS 60 and KBSI 60Radius 100 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
- VBCL 90*60*050 60 50 - - 0.550 1 P piece- VBCL 90*60*075 60 75 - - 0.630 1 P piece- VBCL 90*60*100 60 100 - - 0.650 1 P piece- VBCL 90*60*150 60 150 - - 0.780 1 P piece- VBCL 90*60*200 60 200 - - 0.850 1 P piece- VBCL 90*60*250 60 250 - - 0.950 1 P piece- VBCL 90*60*300 60 300 - - 1.080 1 P piece- VBCL 90*60*400 60 400 - - 1.330 1 P piece- VBCL 90*60*500 60 500 - - 1.430 1 P piece- VBCL 90*60*600 60 600 - - 1.600 1 P piece
- opening for extra locking using 4x VM 6*10 - openings provided for fitting a lid. - Only available in height 60 mm.
DVB 90Cover for low elbow 90°
Flat bandedOn Demand Height of 35 mm - 85 mm - 110 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD DVB 90*60*050 - 50 - - 0.150 1 P pieceHD DVB 90*60*075 - 75 - - 0.250 1 P pieceHD DVB 90*60*100 - 100 - - 0.340 1 P pieceHD DVB 90*60*150 - 150 - - 0.510 1 P pieceHD DVB 90*60*200 - 200 - - 0.680 1 P pieceHD DVB 90*60*250 - 250 - - 0.850 1 P pieceHD DVB 90*60*300 - 300 - - 1.020 1 P pieceHD DVB 90*60*400 - 400 - - 1.360 1 P pieceHD DVB 90*60*500 - 500 - - 1.710 1 P pieceHD DVB 90*60*600 - 600 - - 2.040 1 P piece
To fix with:
- DCL - - - - 0.010 96 P piece
& CLICKQUICK
121
CABLE TRAYS
SDBHinged joint double
On Demand Height 35 mm - 85 mm - 110 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD SDB 60*050 60 50 - - 0.940 1 pieceHD SDB 60*075 60 75 - - 0.980 1 pieceHD SDB 60*100 60 100 - - 1.030 1 pieceHD SDB 60*150 60 150 - - 1.120 1 pieceHD SDB 60*200 60 200 - - 1.220 1 pieceHD SDB 60*250 60 250 - - 1.310 1 pieceHD SDB 60*300 60 300 - - 1.420 1 pieceHD SDB 60*400 60 400 - - 1.590 1 pieceHD SDB 60*500 60 500 - - 1.780 1 pieceHD SDB 60*600 60 600 - - 1.970 1 piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Minimum number bolts and nuts VM 6*10: 8 pieces.
DSHinged joint
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD DS 35 35 - - - 0.110 24 pieceHD DS 60 60 - - - 0.130 50 P pieceHD DS 85 85 - - - 0.340 24 pieceHD DS 110 110 - - - 0.390 24 piece
Minimum number bolts and nuts VM 6*10: 4 pieces.
122
CABLE TRAYS
AZHUniversal coupling 90°
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD AZH 35 35 - - - 0.340 1 pieceHD AZH 60 60 - - - 0.390 1 P pieceHD AZH 85 85 - - - 0.750 1 pieceHD AZH 110 110 - - - 0.900 1 piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Minimum number bolts and nuts VM 6*10: 4 pieces.
BVSIStiffening plate
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD BVSI 050 46.6 100 - - 0.080 1 P pieceHD BVSI 075 70 100 - - 0.100 1 P pieceHD BVSI 100 75 100 - - 0.100 1 P pieceHD BVSI 150 125 100 - - 0.160 1 P pieceHD BVSI 200 175 100 - - 0.180 1 P pieceHD BVSI 250 225 100 - - 0.300 1 P pieceHD BVSI 300 275 100 - - 0.370 1 P pieceHD BVSI 400 375 100 - - 0.500 1 P pieceHD BVSI 500 475 100 - - 0.520 1 P pieceHD BVSI 600 575 100 - - 0.750 1 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Minimum number bolts and nuts VM 6*10: 4 pieces.
123
CABLE TRAYS
VSReducting plate
On Demand Height 35 mm - 85 mm - 110 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD VS 60*025 50 25 - - 0.080 1 P pieceHD VS 60*050 50 50 - - 0.080 1 P pieceHD VS 60*075 50 75 - - 0.090 1 P pieceHD VS 60*100 50 100 - - 0.100 1 P pieceHD VS 60*125 50 125 - - 0.100 1 P pieceHD VS 60*150 50 150 - - 0.110 1 P pieceHD VS 60*200 50 200 - - 0.120 1 P pieceHD VS 60*250 50 250 - - 0.140 1 P pieceHD VS 60*300 50 300 - - 0.180 1 P pieceHD VS 60*350 50 350 - - 0.180 1 P pieceHD VS 60*400 50 400 - - 0.210 1 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
More technical specifications for this product can be found at the end of this chapter.Minimum number bolts and nuts VM 6*10: 4 pieces.
EEnd piece
On Demand Height 35 mm - 85 mm - 110 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD E 60*050 55 46 - - 0.110 1 P pieceHD E 60*075 55 71 - - 0.120 1 P pieceHD E 60*100 55 96 - - 0.130 1 P pieceHD E 60*150 55 146 - - 0.160 1 P pieceHD E 60*200 55 196 - - 0.180 1 P pieceHD E 60*250 55 246 - - 0.170 1 P pieceHD E 60*300 55 296 - - 0.220 1 P pieceHD E 60*400 55 396 - - 0.270 1 P pieceHD E 60*500 55 496 - - 0.310 1 P pieceHD E 60*600 55 596 - - 0.360 1 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Minimum number bolts and nuts VM 6*10: 4 pieces.
124
CABLE TRAYS
RBKBSMEdge protection KBSM(I)
Standard finish Polypropylene
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
- RBKBSM - - - - 0.010 - P piece
MPFolded mounting plate
For the fixation of contact and distribution boxesOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD MP 157 160 - - 0.180 50 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Number bolts and nuts VM 6*10: 2 pieces.
MPVFlat mounting plate
For the fixation of contact and distribution boxesOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD MPV 175 160 - - 0.200 50 P piece
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P piece- KBV - - - - 0.010 96 P piece
HD VMK 6*10 - - M6 - 0.010 250 P piece
Number bolts and nuts VM 6*10: 2 pieces.
125
CABLE TRAYS
MPVCLMounting plate clips
For the fixation of contact and distribution boxes.On Demand Powder coating / Duplex SystemStandard finish Pre-galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
- MPVCL 175 160 - - 0.180 50 P piece
Clippable on the perforated cable tray with clip KBV.
SLOSDivision plate free
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD SLOS 35 35 - - 3000 0.330 150 P mHD SLOS 60 60 - - 3000 0.510 120 P mHD SLOS 85 85 - - 3000 0.680 60 P mHD SLOS 110 110 - - 3000 0.820 3 P m
To fix with:
HD VM 6*10 - - M6 10 0.010 250 P pieceHD VMK 6*10 - - M6 - 0.010 250 P piece
Fixation set VM 6*10: 1 per meter.
SLISClip-in partition
Standard finish Pre-galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
- SLIS 60 60 - - 3000 0.440 3 P m
To fix with:
- CL - - - - 0.010 100 P piece
Fixation set clips CL : 4 pieces per length. Separation SLIS can be used on any width from 200 mm.
& CLICKQUICK
& CLICKQUICK
126
CABLE TRAYS
CLClips for clip-in partition
Standard finish Pre-galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
- CL - - - - 0.010 100 P piece
4 pieces per length
SINBuild-in division plate
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD SIN 85 85 - - 3000 0.670 3 mHD SIN 110 110 - - 3000 0.900 3 m
This partition is pointwelded in the cable tray KG/KGI according to your specifications. The scale should be given when ordering.
SINIBuild-in division plate KGI
On Demand Height 35 mmOn Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/m u Stock Unit
HD SINI 60 60 - - 2950 0.510 3 m
This partition is pointwelded in the cable tray KG according to your specifications. The scale should be given when ordering.
& CLICKQUICK
127
CABLE TRAYS
V 35Jointing plate for fast mounting
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
- V 35 27 180 - - 0.050 48 P piece
Minimum number bolts and nuts VM 6*10: 1 pieces.
V 60Jointing plate for fast mounting
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
- V 60 52 180 - - 0.090 48 P piece
Minimum number bolts and nuts VM 6*10: 2 pieces.
V 85Jointing plate for fast mounting
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
- V 85 77 180 - - 0.130 48 P piece
Minimum number bolts and nuts VM 6*10: 2 pieces.
128
CABLE TRAYS
V 15*200Jointing plate
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD V 15*200 20 150 - - 0.050 48 P piece
V 35*200Jointing plate
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD V 35*200 25 200 - - 0.040 48 P piece
Minimum number bolts and nuts VM 6*10: 2 pieces.
V 60*200Jointing plate
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD V 60*200 50 200 - - 0.080 48 P piece
Minimum number bolts and nuts VM 6*10: 4 pieces.
129
CABLE TRAYS
V 85*200Jointing plate
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD V 85*200 75 200 - - 0.130 48 P piece
Minimum number bolts and nuts VM 6*10: 4 pieces.
V 110*200Jointing plate
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD V 110*200 100 200 - - 0.170 48 P piece
Minimum number bolts and nuts VM 6*10: 8 pieces.
KPWJointing plate for wide-span
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD KPW 115 400 - - 0.590 24 P piece
Minimum number bolts and nuts VM 6*10: 8 pieces.
130
CABLE TRAYS
LVSupporting corner
On Demand Powder coating / Duplex SystemStandard finish Pre-galvanisedOptional finish 1 Hot-dip galvanised
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
HD LV 35 32 20 - - 0.080 24 pieceHD LV 60*85 60 43 - - 0.170 24 P pieceHD LV 110 94 58 - - 0.240 24 piece
Minimum number bolts and nuts VM 6*10: 4 pieces.
KBVFast locking for KBSI
Standard finish Stainless Steel 316
HD ReferenceC
mmN mm
KœL mm
2 mm kg/piece u Stock Unit
- KBV - - - - 0.010 96 P piece
& CLICKQUICK
131
TECHNICAL INFORMATION
KBSI 60Mounting principle
How do you proceed ? Very simple : 1. Put two lengths together. 2. Slide them into each other. 3. Fix clips KBV for extra stability and safe locking. 4. Finished !!! This system offers you various advantages : 1. Smaller cost price. 2. Faster mounting. 3. No bolts and nuts required. 4. Fixation with clips. 5. Earthing. 6. Easier fixation thanks to alternative perforations. 7. Better stability thanks to embedded perforations. 8. Better aeration of the cables thanks to embedded perforations. 9. Integrated cable protection thanks to overlapping ends. 10. Smooth finishing touch. 11. Smaller stock investment.
B 90Mounting principle
132
TECHNICAL INFORMATION
VSMounting principle
133