Download - Business Studies Glossary S-cool
-
7/25/2019 Business Studies Glossary S-cool
1/46
A-Level Business studiesRevision notes 2014
-
7/25/2019 Business Studies Glossary S-cool
2/46
1
Contents
Business Objectives and Strategy ................................................................................... 2
Business Organisation ................................................................................................... 4
Marketing ..................................................................................................................... 9
Marketing Planning....................................................................................................... 14
Budgeting, Costing and Investment ............................................................................... 19
Company Accounts ....................................................................................................... 22
Ratio Analysis .............................................................................................................. 26
Production Control ....................................................................................................... 28
Production Decision Making .......................................................................................... 31
External Environment ................................................................................................... 34
Management, Leadership, Motivation and Communication ............................................... 38
People in the Workplace ............................................................................................... 42
These notes cover the main areas of this subject. Please check the specific areas you need with your exam
board. They are provided as is and S-cool do not guaranteed the suitability, accuracy or completeness of this
content and S-cool will not be liable for any losses you may incur as a result of your use or non-use of this
content. By using these notes, you are accepting the standard terms and conditions of S-cool, as stated in the s-
cool website (www.s-cool.co.uk).
http://www.s-cool.co.uk/http://www.s-cool.co.uk/http://www.s-cool.co.uk/http://www.s-cool.co.uk/ -
7/25/2019 Business Studies Glossary S-cool
3/46
2
Business Objectives and Strategy
Aims These are the long-term goalsthat provide direction for setting objectives. They are often
expressed in the form of a mission statement. A typical corporate aim might be 'to become
Europe's number 1 car manufacturer'. From this aim, a company can set a number of objectives
and targets, such as to increase the quality of its products, to improve productivity levels, or to
increase the effectiveness of its promotional campaigns.
Contingency
planning
This means preparing for unwanted and unlikely possibilities. A business may produce a
contingency plan in case of:
a severe recession
an environmental disaster
a sudden strike by its workforce
Contingency plans enable a business to be in a better position to manage a crisis, rather than
to try and simply cope with it when it occurs.
Corporate
objectives
These are the goals of the whole company. These should be based upon the company's
aims and mission statement. Each department should then set its objectives based on the
corporate objectives. Examples of corporate objectives include:
to achieve long-term growth.
to diversify the range of products and markets.
to maximise profits.
Crisis
management
This is the response of an organisation to a crisis (e.g. a fire, terrorist activity, natural disaster).
Many companies will have some sort of contingency plan to cater for such situations, but it is
rare that the actual crisis will go according to plan. It is likely that the person in charge at the
time of the crisis will manage the crisis in a very authoritarian fashion, as he needs to makequick and effective decisions without the time for discussion and consultation with others.
Decision tree This is a diagram that sets out the various possible options available to a business when it
makes a decision (such as an investment) plus the probable outcomes that might result from
each option. A decision tree also shows the likely probability of each option occurring and it sets
out the likely amounts of money that can be expected at the end of each branch. Essentially, a
decision tree shows the average amounts of money that are likely to be received if the decision
was taken many times.
Mission This outlines the aims of a businessin an attempt to provide a sense of direction and
-
7/25/2019 Business Studies Glossary S-cool
4/46
3
statement shared purpose for the stakeholders of the business. It often states what the business has
done, what it would like to do and the strategies that it will use to achieve its overall aims.
Objectives These are the medium- to long-term goalsand targets of a business. Objectives must be
achievable and realistic if they are to be of any use to employees, since an unrealistic objective
is likely to act as a demotivator to the workforce. Objectives need to be agreed through
consultation with employees, rather than simply being set by the managers and Directors. This
gives the employees a sense of belonging and responsibility - which is likely to lead to higher
levels of motivation and job satisfaction.
Stakeholder This is an individual, or a group of people, with a direct interest(financial or otherwise) in a
business. The main stakeholders are employees, shareholders, customers, the government,
suppliers, creditors, pressure groups and the local community. Each group of stakeholders is
likely to want the business to achieve a different objective or to follow a different course of
action. These differing opinions and views often, inevitably, result in conflict between the
stakeholder group and the business.
Strategy This is a medium- to long-term course of action, which will enable the business to achieve
its objectives. The strategy would include what needed to be done, the resources required and
the likely timescale involved.
SWOT analysisThis is an investigation into the strengths (e.g. high level of market share), weaknesses (e.g.
high gearing), opportunities (e.g. new markets to break into), and threats (e.g. new
competitors entering the industry) that a business is faced with at a specific point in time.
Strengths and weaknesses areinternalfactors which the business has direct control over,
while opportunities and threats arise from the externalenvironment and are, therefore, more
unpredictable and potentially dangerous.
"What if...?"questions
Before contingency planning can take place, a business must consider many possible threatsand crises that it may face, in order to be able to react to them swiftly and efficiently if they do
ever occur. These are often computer-simulated and they can predict to a high level of
accuracy the likely effects of a crisis on the finances and resources of a business.
-
7/25/2019 Business Studies Glossary S-cool
5/46
4
Business Organisation
External
financing
This means obtaining sources of finance from outside the firm. This can be done in one
of three ways: debt (such as loans), share capital, or grants from the Government.
External
constraint
This is a factor outside the control of the business, which directly affects the business.
The main types of external constraint include consumer tastes, competitors' actions,
economic circumstances, legal constraints, social attitudes and pressure group activity.
Flotation This is the term given to the initial launch of a company on to the stock market, by
offering its shares to the general public.
Franchise This is a business which is based upon the name, products, trademarks, logos, etc. of an
existing, successful business. To obtain a franchise involves the payment of an initial fee
plus the ongoing payment of a royalty based on sales revenue.
Franchisee This is a person or company who has bought a franchise(i.e. the rights to use the name,
products, trademarks, logos, etc. of another company (the franchisor).
Franchisor This is the successful business which will sell the rights to its business name, products,
etc. to suitable franchisees. This can be a far cheaper and easier way to expand the
company than the alternative of opening more branches itself.
Horizontal
integration
This occurs where a firm takes over or merges with another firm at the same stage of
production (i.e. the two firms were in direct competition with each-other).
Internal
constraint
This is a factor that restricts the business from achieving its objectives, but it is withinthe
controlof the business. The main internal constraints are finance, marketing, people and
production.
Internal
financing
This is the generation of cash from within the company's resources/accounts. This can be
obtained from retained profits, working capital and the sale of fixed assets.
-
7/25/2019 Business Studies Glossary S-cool
6/46
5
Lease This is a way of securing and using property for a restricted period of time. When the lease
runs out, the ownership of the property returns to the freeholder (the owner).
Leasing This is a method of securing and using fixed assets (other than property) without the need
for the initial cash outlays needed to purchase the asset.
Limited liability This is the idea that the owners of a company (shareholders) are only responsible for the
amount of money that they have invested into the company, rather than their personal
assets. Thus if a firm becomes insolvent, the maximum that creditors can receive is the
shareholders' initial investment. The word 'Ltd' or 'PLC' appear after the company's name to
inform creditors that the business has limited liability.
Management
buy-in
This occurs when managers from outside a company buy up the shares and take control of
the company. This strategy is pursued if the managers believe that they can run the firm
more efficiently than the current management.
Managementbuy-out (MBO)
This occurs when the managers of a business buy out the shareholders, and therefore ownand control the business. The management believe that they can improve the profitability
and efficiency of the business.
Merger This is an agreement between the managements and shareholders of two companies to
bring both firms together under a common board of directors. It is also referred to as
amalgamation or integration.
Multinational This is a business organisation which has its headquarters in one country, but has
manufacturing plants in many other countries.
Ordinary share These are purchased in order to have part ownership in either a Private Limited Company or
in a Public Limited Company (PLC). At the end of each financial year ordinary shareholders
receive a dividend per share that they own, but only after debenture holders, preference
shareholders, long-term debt holders and the government (through taxes) have been paid.
They are, therefore, often said to have the 'last claim' on the profits of the company.
Similarly, if the company becomes insolvent and goes into liquidation, ordinary shareholders
are the last group of people to receive any return, after all other debts have been paid.
-
7/25/2019 Business Studies Glossary S-cool
7/46
-
7/25/2019 Business Studies Glossary S-cool
8/46
7
Public limited
company (PLC)
This is a company with limited liability that has over 50,000 of share capital and a very
large number of shareholders. PLCs are the only type of company allowed to be quoted on
the Stock Exchange. These companies have to disclose their annual accounts, are open to
take-over bids.
Prospectus This is a document which companies have to produce when they go public (i.e. when they
wish to float on the Stock Exchange). It gives details about the company's activities and
anticipated future profits. It has to conform to the Companies Act 1985 and be handed to
the Registrar of Companies.
Sale and
leaseback
This is a contract to raise cash by selling the freehold to a piece of property and then buying
it back on a long-term lease. This ensures that the firm can stay in its premises and
therefore can carry on trading as if nothing has happened. The money released through this
process enables the firm to improve its liquidity position, although it owns less fixed assets
than before.
Secondary
sector.
This is that part of the economy involved in the making and manufacturing of goods.
Over the past twenty years, the UK has seen a large decline in the number of people
employed in the secondary sector of the economy, due to firstly a fall in demand for the
output and secondly due to the replacement of workers by machines (mechanisation).
Sole trader This is an individual who owns and controls his / her own business. Common examples
of sole traders include corner shops, newsagents and market traders. They have unlimited
liability for their debts and often have little available finance for expansion. They often
employ waged workers, yet keep all the profit (after tax) for themselves.
Stock Exchange This is a market for securities (the collective name for stocks and shares). The London Stock
Exchange is one of the biggest in the world after Tokyo and New York. Its main functions
are to enable firms or governments to raise capital and to provide a market in second-hand
shares and government stocks.
Take-over This involves purchasing over 50 per cent of the share capital of a company and then being
able to exert full control over it. This process is also known as acquisition or integration.
-
7/25/2019 Business Studies Glossary S-cool
9/46
8
Take-over bid This is an attemptby a company to buy a controlling interest (i.e. over 50% of the ordinary
shares) in another company. This is done by offering the target firm's shareholders a
significantly higher price for their shares than the prevailing market price.
Tertiary sector This is that part of the economy concerned with providing goods and servicesto
customers. It is the largest sector in terms of employment in the UK, accounting for over
two-thirds of the workforce.
Unlimited
liability
This refers to the fact that the owners of certain business organisations(sole traders and
partnerships)are not limited to the extent of their debts. They will have to sell off their
own assets and use their own personal wealth, if necessary, to meet the debts of their
business. If the business debts are greater than their own personal wealth, then the
business may be forced into bankruptcy.
Vertical
integration
This occurs when two firms join together (through a merger or a take-over) that operate in
the same industry, but at different stages in the production chain. Backward
verticalintegration means buying out a supplier (e.g. a car manufacturer buying a
components supplier).Forward verticalintegration means buying out a customer (e.g. the
car manufacturer buying up a chain of car showrooms).
-
7/25/2019 Business Studies Glossary S-cool
10/46
9
Marketing
Asset-led
marketing
This bases the marketing strategy of a business on its existing strengths, rather than on
what the customer wants (e.g. Nestle developing a mousse-style dessert, based on its
successful Smarties brand).
Base year This refers to index number data, and it relates to the year that is chosen for comparison
with other years (it has an index number of 100).
Confidence
level.
This is a measurement of the degree of certaintyto be attached to a conclusion which is
drawn from a sample finding. The most common type is a 95% confidence level (i.e. the
sample findings will be correct for 19 times out of every 20 attempts).
Correlation. This measures the relationship that exists between two or more variables. A positive (or
direct) correlation is said to exist where one variable increases along with the other, and vice
versa (e.g. as disposable income per head rises, then so too does expenditure on food
products). A negative (or indirect) correlation is said to exist where one variable declines as
the other rises, and vice versa (e.g. as the price of new cars falls, demand for new cars will
tend to rise).
Extension
strategy
This is an attempt by a business to lengthen the product life-cyclefor a particular brand.
It is likely to be used at either the maturity or early decline stages of the life-cycle. Types of
extension strategy include:
redesigning the product
adding an extra feature
changing the price
changing the packaging and advertising
Extrapolation This means calculating and analysing recent trends, and assuming that these trends will
continue into the future. They can then be used to predict, to a reasonable level of accuracy,
how a particular variable (such as sales) will change in the future.
Index number This is a statistical measure which is designed to make changes in a set of data (such as
sales figures) easier to manage and interpret. It involves giving one item of data a value of
100 (the base period), and adjusting the other items of data in proportion to it.
-
7/25/2019 Business Studies Glossary S-cool
11/46
10
Innovation This means the commercial exploitation of an invention (i.e. altering an invention, so that it
appeals to consumers and meets their needs).
Market
orientation
This is a strategy that involves researching consumers' needs, and then developing new
products and processes based around these needs. The main alternative is production
orientation, where the business develops products based on its production capability and
ignores consumers' needs.
Market
penetration
This is a pricing strategyfor a new product. The product is launched onto the market at a
low price in order to build up a strong customer following. This low price aims to steal market
share from existing competitors and it deters new competitors from entering the industry.
Market
research
This is the process of gathering dataon the habits, lifestyle and attitudes of actual and
potential customers, with a view to developing products to meet their needs.
Market
segmentation
This involves breaking the market down using various criteria, in order to identify distinct
groups of customers. The main ways in which a market can be segmented are :
Demographically (such as occupation or age)
Psychographically (by peoples' attitudes and tastes)
Geographically (by region)
Market share This measures the percentage of all the sales within a particular market that are held by one
product or by one company.
Market size This is the total sales of all the businesses in a particular industry.
Marketing mix This is often known as "The 4 Ps" (product, price, promotion and place) and it is the term
given to the main variables with which a firm carries out its marketing strategy and meets
customers' needs.
Marketing
model
This is a framework for making marketing decisions in a scientific manner. It is derived from
F W Taylor's method of decision-making. The model has five stages.
Stage 1 - Set the marketing objective
-
7/25/2019 Business Studies Glossary S-cool
12/46
11
Stage 2 - Gather the data that will be needed to help make the decision
Stage 3 - Form hypotheses
Stage 4 - Test the hypotheses
Stage 5 - Control and review the whole process
Marketing plan This outlines the marketing objectives and strategy of a business. The plan is
normally developed in three stages :
carrying out a marketing audit
setting clear objectives for the next year
developing a strategy for achieving the objectives
Marketing
strategy
This is a medium- to long-term planfor meeting marketing objectives. A marketing
strategy is implemented through the marketing mix (product, price, promotion and place).
Moving
average
This is a method of identifying the trend that exists within a series of data. It calculates an
average figure for every few items of data - therefore eliminating any fluctuations which
may exist, in order to show the underlying trend.
Niche
marketing
This is a business strategy that involves identifying consumers' needs and providing products
to meet these needs in small, lucrative market segments. It is the opposite strategy to mass
marketing.
Primary data This is first-hand informationthat is specifically related to a firm's needs.
Primary
research
This involves gathering first-hand data that is specifically concerned with a firm's products,
customers or markets. It is gathered through questionnaires, observation or experimentation
(e.g. test markets).
Product life
cycle
This theory states that all products follow a number of stages during their commercialisation
(introduction, growth, maturity, saturation and decline). Each product will pass through these
stages at different speeds.
Product
portfolio
This refers to the range of products produced by a business. This portfolio should range over
a variety of markets and a variety of stages in the product life cycle. One way of analysing
-
7/25/2019 Business Studies Glossary S-cool
13/46
12
the product portfolio of a business is through the Boston Matrix.
Qualitative
research
This is detailed research into the motivations behind consumers' attitudes and behaviour. It
is carried out through interviews and discussion groups.
Quantitative
research
This means carrying out research into consumers' buying habits, trying to investigate such
issues as a product's consumer profile, likely levels of sale at different price levels, and
predicted sales of new products.
Quota sample This involves segmenting the population and interviewing a given number of people in each
segment, according to their demographic characteristics
Random
sample
This involves giving every person in the population an equal chance of being interviewed to
find out their tastes, shopping habits, etc.
Retail prices
index (RPI)
This shows changes in the price of the average person's shopping basket. The RPI is the
main measurement of inflation in the UK and is calculated through a weighted average of
each month's price changes.
Sample This is a group of people who are chosen to take part in a market research campaign. Their
views and opinions are assumed to be representative of the population as a whole.
Secondary data This is market research information which is collected from second-hand sources (e.g.
reference books, company reports, or government statistics).
Stratified
sample
This is a method of sampling that interviews people from a specific subgroup of the
population, rather than from the population as a whole. This method of sampling would be
chosen buy a business if the buyers of its products fell into a certain age-group or geographic
area, rather than being spread across the whole population.
Test market This is the launch of a new product within a small geographic area(rather than
nationally), in order to measure its potential sales and profitability. This reduces the risk and
-
7/25/2019 Business Studies Glossary S-cool
14/46
13
the costs associated with a national failure.
Value added This is the difference between the cost of the raw materials / inputs and the price that
customers are prepared to pay for the final product (i.e. value added = selling price -
bought-in goods and services).
-
7/25/2019 Business Studies Glossary S-cool
15/46
14
Marketing Planning
Advertising
This is a method of promotionthat a business has to pay for. It is carried out through a variety of mediums,
such as television, newspapers, magazines, cinema or radio. Advertising is either informative(making the
market aware of the product / service) or persuasive(trying to entice customers to buy the product / service).
Advertising elasticity
This measures the effect on the demand for a product, following a change in advertising expenditure. It is
calculated by the formula:
If a large fall in advertising expenditure lead to just a small fall in quantity demanded, then the product would be
advertising inelastic.
Advertising Standards Authority (ASA)
This is an organisation which monitors advertisements in print (i.e. magazines, newspapers, posters) in the UK
and ensures that they are "fair, true, decent and legal".
Advertising strategy
This is the way that the business attempts to achieve its advertising objectives. The advertising strategy will
usually state the necessary finance that must be available and the relevant media to be used.
Branding
This means creating a name and identity for a productwhich differentiates it from those of competitors.
Brand leader
This is the product (brand) which has the largest market sharein a particular industry. It is often in the
'Maturity' stage of the product lifecycle and due to its brand loyalty; it can have a high retail price.
Brand loyalty
This is where customers are happy with their purchase of a particular product, and will return to purchase it
again in the future.
Consumer durables
These are products which are purchased by households, and are likely to last for a considerable period of time
(e.g. televisions, cars, ovens, video-recorders, etc).
-
7/25/2019 Business Studies Glossary S-cool
16/46
15
Contribution per unit
This is selling price minus variable costs per unit. The remaining money contributes towards covering fixed costs.
Cost-plus pricing
This means arriving at the selling price for a product by adding a profit mark-up to the total costs per unit.
Direct mail
This refers to promotional material that is sent directly to certain homes and addresses, which are selected from
a list of known customers (e.g. 'Britannia Music Club').
Direct marketing
This refers to promotional activities that involve the business making direct contact with potential customers
(e.g. direct mail and door-to-door selling).
Distribution
This refers to the process of getting the products from the factory to the customers.
Distribution channels
These are the stages involved in getting the product from the factory to the customers (e.g. wholesalers and
retail outlets).
Income elasticity
This measures the effect on the demand for a product, following a change in the income of customers. It is
calculated by the formula
If a large fall in income leads to a small fall in quantity demanded, then the product would be income inelastic.
Loss leader
This term refers to a product which has its retail price set at a level which is less than its costs of production.
This strategy is often used by multi-product businesses, which hope that customers will buy their loss leader
product, as well as a range of their other products which carry a significant profit margin.
Marketing
-
7/25/2019 Business Studies Glossary S-cool
17/46
16
The business function which involves getting the right product to the right place, at the right price, using
appropriate methods of promotion, and doing it profitably. It is often pre-empted by carrying out extensive
market research, in order to discover the customers' needs and wants.
Marketing mix
This term refers to the four main marketing strategies through which a business will attempt to achieve its
marketing objectives. These are often known as the '4 Ps'(product, price, promotion and place).
Market penetration
This is a pricing strategy for a new product, designed to undercut existing competitors and discourage potential
new rivals from entering the market. The piece of the product is set at a low level in order to build up a large
market share and a high degree of brand loyalty.
Packaging
This refers to the colour, shape and presentation of the product and its protective wrappings. This is an
important element in the promotional mix that a business chooses, because packaging can create a Unique
Selling Point (U.S.P) for a product.
Predatory pricing
This is a pricing strategy which involves a business setting a price for a product at such a low level that theircompetitors are either forced to leave the market or, more seriously, are forced out of business.
Price discrimination
This is a pricing strategy which involves a business charging different pricesto different peoplefor the same
product or service. This strategy aims to maximise the sales revenue of the business, by charging a higher price
to those groups of customers who have a low elasticity of demand, and charging a lower price to those groups
who have a high elasticity of demand. For example, the train companies charge a high price early in the morning
to commuters, and a lower price several hours later for other members of the public, for the same distance and
journey from London to Birmingham.
Price elastic
This refers to a situation where a given percentage change in the price of a product results in a larger
percentage change in the level of demand for it (e.g. luxury products such as cars, holidays, dishwashers, etc).
These products are considered to be price sensitive, since even a small rise in price can result in a large fall in
demand.
Price elasticity
This measures the effect on the demand for a product, following a change in its price. It is calculated by theformula:
-
7/25/2019 Business Studies Glossary S-cool
18/46
17
If a large fall in the price of the product leads to a small fall in quantity demanded, then the product would be
price inelastic. An answer of more than one indicates that the demand for the product is price elastic. An answer
of between zero and one indicates that the demand for the product is price elastic.
Price inelastic
This refers to a situation where a given percentage change in the price of a product results in a smaller
percentage change in the level of demand for it (e.g. necessity and habit-forming products, such as milk,
newspapers, alcohol and tobacco).
Price leader
This is the term used to describe a product or brand which is a dominant force in the marketplace and it can set
its price at any level it chooses. The price that is set by competitors will therefore be dictated by the price leader.
Price taker
This is the opposite to a price leader. It refers to the products of a business which are not market-leaders, and
therefore they have to set their price based upon the level set by the dominant product in the market place.
Price war
This refers to a situation where two or more businesses lower their prices in an attempt to win sales and market
share from each-other. Price wars are most likely to start in very competitive markets, where the growth
potential is very high and consumer sales are very lucrative (e.g. the supermarket industry - TescoandAsda).
Consumers are the only group who really benefit from a price war in the short-term, since they pay lower prices.
However, if the price war results in one or more of the competitors becoming unprofitable and being put out of
business, then the consumer may be faced with less choice and higher prices than before the price war started.
Pricing methods
This refers to the different ways that a business can decide on the price(s) to charge for its product(s). The main
pricing methods are:
- Mark-up pricing (adding a fixed percentage of profit to the direct production costs or total variable costs).
- Cost-plus pricing(adding a percentage of profit to the full cost per unit).
- Competitive pricing(setting prices based upon the existing businesses in the marketplace).
- Skimming(setting the price at a high level, to reflect the innovative nature of the product or to cover the high
costs of production).
-
7/25/2019 Business Studies Glossary S-cool
19/46
18
- Penetration(setting a low price level, to undercut the existing competitors and build up a large market
share).
- Psychological pricing(this means setting the price for a product at a level based on the expectations of the
consumer. For example, 9.99 instead of the 10 threshold, or 99 instead of the 100 threshold).
Product development
This is a strategy of bringing new products to the marketplace. It can either involve making slight improvements
to existing products, or by developing and launching totally new products. The objectives of product
development include increasing sales revenue, to increase market share, or to defend a brand leader by making
it even better than the competitors' products.
Product differentiation
This is the perceived difference(s) that consumers believe exist between one product and its competitors. A
product with a high degree of differentiation can be sold at a high price, therefore yielding a high profit-margin.
Sales promotion
This is a promotional strategy designed to boost the sales of a product in the short-term (using such tactics as a
price discount, free products, competitions, discount coupons, etc.).
Skimming
This is a pricing strategy for a new product, designed to create an up-market, expensive image by setting the
price at a very high level. It is a strategy often used for new, innovative or high-tech. products, or those which
have high production costs which need recouping quickly.
-
7/25/2019 Business Studies Glossary S-cool
20/46
19
Budgeting, Costing and Investment
Average rate
of return
(ARR)
This is an investment appraisal techniquewhich calculates the average annual profit of an
investment project, expressed as a percentage of the sum of money invested.
Break-even
chart
This is a graphshowing the total revenue and the total costs of a business at various levels of
output. It is a form of Management Accounting and it enables a manager to see the expected
profit or loss that a product will face at different levels of output.
Break-even
point
This refers to the point on a break-even chart where the total revenue (T.R) of a business (or
product) is equal to its total costs (T.C). It can also be calculated mathematically by using the
following formula :
Budget This is a financial planfor the forthcoming year that is drawn up to help a business achieve
its objectives. It covers aspects such as sales, production expenses, etc.
Budgetary
control
This refers to the system of regular comparison of budgeted figures (for revenue and
expenses) with the actual outcomes. Any differences between the budgeted figures and the
actual outcomes are known as variances - these need to be investigated and the reasons for
their existence must be established.
Contribution This is total revenue minus total variable costs. The remaining figure is called 'contribution'
because it contributes towardscovering fixed costs and, once these are covered, it
contributes towards profit.
Contribution
per unit
This is the amount of money that each unit that is sold contributes towards covering the fixed
costs of the business. Once the fixed costs are covered, all extra contribution is profit.
Cost centre This is a department or a division of a business to which certain costs can be allocated (e.g.
wages and salaries, telephone bills, etc.).
-
7/25/2019 Business Studies Glossary S-cool
21/46
20
Direct cost This is a cost which can be attributed to the production of a product, and it will vary in direct
proportion to output (e.g. raw materials and wages of production workers).
Discounted
cash flow
(DCF)
This is an investment appraisal techniquewhich discounts the monies that the business
will receive in future years from a certain investment project, in order to give a present-day
value for each year's return.
Fixed costs These are costs which do not vary with output, and would be incurred even when output
was zero (e.g. rent, loan repayments, salaries).
Fixed costs
per unit
These are total fixed costs divided by the number of units produced. They are often referred to
as average fixed costs.
Indirect cost This is a cost which is not directly attributable to production(e.g. managers' salaries,
mortgage payments, or rent). These costs are often referred to as 'overheads'.
Indirect
labour
These are those employees such as office and cleaning staff who are not involved directly in
the process of production or customer service.
Net present
value (NPV)
This is an investment appraisal techniquewhich calculates the total of all the years'
discounted cash flows, minus the initial cost of the investment project. If the resulting figure
(the NPV) is positive, then the project is viable and should be undertaken.
Payback
period
This is an investment appraisal techniquewhich estimates the length of time that it will
take to recoup the initial cash outflow of an investment project.
Profit This is the amount of revenue that remains for a business or a product, after all costs have
been deducted (i.e. profit = total revenue - total costs).
Profit centre This is a department or a division within a business which operates independentlyand
produces its own annual profit and loss account.
-
7/25/2019 Business Studies Glossary S-cool
22/46
21
Safety margin This is the number of units of output that the business produces above its break-even
point. It represents the number of units that the production level could decrease by, before
the business would make a loss. It is calculated by the formula :
Margin of safety = Current output level - Break-even output level.
Variable cost This is a cost which varies directly with the number of unitsthat the business produces
(e.g. raw materials, wages of production workers, and electricity bills). In other words, as the
level of output increases, then so too will the variable costs that the business has to pay.
Variable cost
per unit
These are the total variable costs divided by the number of units produced. They are often
referred to as average variable costs.
Variance This is the differencebetween the actual resultsof the business and the figures that the
business budgetedfor the year (e.g. sales, wages, advertising costs, etc.). Positive (i.e.
favourable) variances occur where the actual amount of money flowing into the business is
more than the budgeted figure, or where the actual amount of money flowing out of the
business is less than the budgeted figure. Negative (i.e. unfavourable) variances occur where
the actual amount of money flowing into the business is less than the budgeted figure, or
where the actual amount of money flowing out of the business is more than the budgeted
figure.
Zero
budgeting
This is where a budget is set to zero for a given time-period, and the manager of the particular
division or department then has tojustify any expenditurewhich he wishes to make. It is
often used in an economic recession or a downturn in the industry, when money is not as
readily available.
-
7/25/2019 Business Studies Glossary S-cool
23/46
22
Company Accounts
Asset This is an item that a business owns- it can either be a fixed asset (owned for more
than 12 months) or a current asset (owned for less than 12 months).
Assets
employed
This is the present value of all the assets of the business minus current liabilities.
Balance sheet This is a snapshot at a given point in time, showing the assets, liabilities and capital of a
business. It essentially shows the net worth of a business
Capital
employed
This is the total of all the long-term finance of the business. Essentially it shows
where the business raised its money from (loans, share capital and reserves). Capital
employed equals assets employed.
Capital
expenditure
This is expenditure on items of capital and new fixed assets(e.g. land and buildings,
vehicles, machinery).
Cash flow
forecast
This is a Management Accounting documentwhich outlines the forecasted future cash
inflows (from sales) and the outflows (raw materials, wages, etc.) per month for a business.
Cash flow
statement
This is a Financial statementwhich shows the cash inflows and the cash outflows for a
business over the past 12 months.
Cost of sales This is often referred to as 'Cost of goods sold'. It represents the direct costs of
manufacturinga given level of output.
Creditors These are any monies which the business owesto its suppliers, which will be settled
within the next 12 months (e.g. payment for raw materials purchased on credit).
Current asset This is an item that a business owns forless than 12 months(e.g. cash, debtors, stock).
-
7/25/2019 Business Studies Glossary S-cool
24/46
23
Current liability This is an item that a business owes to an external body, which will be settled within 12
months(e.g. creditors, overdraft, corporation tax to the Inland Revenue).
Debtors These are the people who owe the business money(e.g. customers who have purchased
goods on credit).
Depreciation This is the fall in the valueof fixed assets, either due to their use, due to time, or due to
obsolescence. Essentially, depreciation divides up the historic cost of a fixed asset over the
number of expected years that it will be used by the business.
Dividends This is the total amount of 'profit after tax' that the business will issue to shareholders at the
end of the financial year. The remainder of the 'profit after tax' will be retained in the
business for re-investment.
Fixed assets Items of a monetary value which have a long-term functionand can be used repeatedly.
These determine the scale of the firm's operations. Examples are land, buildings, equipment
and machinery. Fixed assets are not only useful in the running of the firm, but can alsoprovide collateral for securing additional loan capital.
Gearing This measures the proportion of capital employed that is funded by long-term liabilities (e.g.
loans, mortgages, etc.). It is calculated by dividing long-term liabilities by capital employed
and multiplying by 100.
Gross profit This is the sales revenue of a business minus the cost of sales (i.e. minus the direct costs
incurred in manufacturing the products which have been sold).
Gross profit
margin
This is the gross profit figure expressed as a percentageof the sales revenue figure. It
shows the proportion of sales revenue that remains after all direct costs have been
accounted for.
Historic cost This is the original pricewhich was paid for an asset.
-
7/25/2019 Business Studies Glossary S-cool
25/46
24
Intangible
assets
These are fixed assets which are not physical(e.g. brand names, goodwill, patents). They
are of long-term value to the business and will exist for more than 12 months.
Liquidity This is the ability of a business to meet its short-term debts. The current ratio and
the acid-test ratio can measure this.
Liquidity crisis This refers to a situation where a business does not have enough liquid resources (i.e. cash)
to meet its current liabilities and short-term debts.
Net assets This is fixed assets + current assets - current liabilities. It is often used instead of the
term 'assets employed'.
Net current
assets
This is also referred to as working capitaland it is calculated by deducting current
liabilities from current assets. It represents the finance that is available for the day-to-day
running of the business.
Net profit
margin
This is the net profit figure expressed as a percentageof the sales revenue figure. It
shows the proportion of sales revenue that remains after all expenses have been accounted
for.
Profit and loss
account
This is a financial statementlisting all the revenues and expenses of a business over a
period of time (normally 12 months).
Reserves These consist of retained profitfrom previous trading periods and any increase in the
value of fixed assets such as land and buildings, which form part of the long-term capital of
the business.
Revenue
expenditure
This refers to any expenditure on all items other than fixed assets (e.g. raw materials,
wages, utility bills, etc.). These are usually day-to-day expenditure that the business incurs
when it tries to create sales revenue.
Shareholders' This is the capital invested by the shareholders plus the reserves which have been
-
7/25/2019 Business Studies Glossary S-cool
26/46
25
funds accumulated over the years. It represents the total capitalwhich the shareholders have a
claim on within the business.
Straight-line
depreciation
This method of depreciating a fixed asset charges an equal amountto each year of its
expected useful life.
Window-
dressing
This is a form of creative accountingand it involves presenting the accounts of a
business in such a way as to flatter its financial position.
Working capital This is the day-to-day financethat is needed for running a business. It is also referred to
as 'net current assets'and it is calculated by deducting current liabilities from current
assets. Working capital is used to pay for expenses such as wages, raw materials and utility
bills.
-
7/25/2019 Business Studies Glossary S-cool
27/46
26
Ratio Analysis
Acid test ratio This measures the ability of a business to meet its short-termdebts. It is
calculated by dividing current assets minus stock by current liabilities.
Asset turnover This measures the ability of a business to generate sales revenue from its assets. It
is calculated by dividing sales revenue by net assets.
Current ratio This measures the ability of a business to meet its 'current' debts. It is calculated by
dividing current assets by current liabilities.
Dividends This is the total amount of 'profit after tax' that the business will issue to
shareholders at the end of the financial year. The remainder of the 'profit after tax'
will be retained in the business for re-investment.
Dividend cover This is the number of timesthat the dividend that has actually been paid to
shareholders could have been paid out of the 'profit after tax'.
Dividend per share This is the amount of 'profit after tax' that each shareholder will receive per sharethat they hold at the end of the financial year.
Dividend yield This is the dividend per share expressed as a percentageof the current market
price of the share. It provides a figure which can be compared with other forms of
investment, to see if the yield from the shares is worth the risk of investing the
money.
Earnings per share
(EPS)
This is the amount of money per share that each shareholder couldreceive, if the
business decided to give all the 'profit after tax' to the shareholders. It is calculated
by dividing the profit after tax by the number of ordinary shares.
Gearing This percentagemeasures the proportion of capital employed that is funded by
long-term liabilities (e.g. loans, mortgages, etc.). It is calculated by dividing long-
term liabilities by capital employed and multiplying by 100.
Gross profit This is the sales revenue of a business minus the cost of sales (i.e. minus the direct
costs incurred in manufacturing the products which have been sold).
-
7/25/2019 Business Studies Glossary S-cool
28/46
27
Gross profit margin This is the gross profit figure expressed as a percentageof the sales revenue
figure. It shows the proportion of sales revenue that remains after all direct costshave been accounted for.
Net profit margin This is the net profit figure expressed as a percentageof the sales revenue figure.
It shows the proportion of sales revenue that remains after all expenses have been
accounted for.
Price: earnings ratio (PE
ratio)
This is a measure of the confidencethat the 'City' has for the shares of a particular
company. It is calculated by dividing the current market price of the share by the
'earnings per share' figure.
Return on capital
employed (ROCE)
This is the profit of the business expressed as a percentageof the 'capital
employed' figure. It is often referred to as the 'primary efficiency ratio, and it
basically relates the profit to the size of the business.
Stock turnover This is a measure of the timethat a business takes to sell its stock. A
supermarket will have a high stock turnover ratio, since it sells many goods on a
day-to-day basis. Whereas a retailer such as 'Dixons' will have a much lower stockturnover, since it does not sell its stock as quickly. It is calculated by dividing the
cost of sales by the stock figure.
-
7/25/2019 Business Studies Glossary S-cool
29/46
28
Production Control
Automation This is the replacement of workers with machinery. Machines have several advantages over
workers, such as zero rates of absenteeism and sickness, and a constant productivity rate
which can be used for 24 hours a day.
Benchmarking This refers to a business finding the best methods and processes that are used by other
businesses, and then trying to emulate these in order to become more efficient in its
operations.
British Standard
5750 (ISO 9000)
BS 5750 was the most common quality certification in the UK - it is now known as ISO
9000, which is an international standard which tells customers that a business has reached
a required level of quality in its products and processes.
British Standards
Institution (BSI)
This is the body that is responsible for setting quality and performance standards in
industry. The BSI 'kitemark' on a product implies to customers that it has been
manufactured and produced to a high level of quality.
Buffer stock This is the minimum stock level which will be held by a business to meet any unexpected
occurrences (e.g. a sudden large order from a customer or, deliveries of raw materials not
arriving on time).
Cell production This method of manufacturing an item organises workers into 'cells' within the factory, with
each cell comprising several workers who each possess different skills. Each cell is
independent of the other cells and will usually produce a complete item.
Computer aided
design (CAD)
This is the use of sophisticated computer software to design 3-dimensional images of
products quickly and relatively cheaply.
Computer aided
manufacture
(CAM)
This is the use of computers for a wide variety of production tasks, including automated
production lines and stock control systems.
Just-in-time (JIT) This is a method of manufacturing products which aims to minimise the production time,
the production costs and the amount of stock held in the factory. Raw materials and
supplies arrive at the factory as they are required, and consequently there is very little
stock sitting idle at any one time. Each stage of the production process finishes just before
-
7/25/2019 Business Studies Glossary S-cool
30/46
29
the next stage is due to commence and therefore the lead-time is significantly reduced.
Kaizen This is a Japanese word which means 'continuous improvement'. It is widely held that any
aspect of the business can be improved - not just the production processes.
Lead-time This is the amount of time between a business receiving an order from a customer and the
delivery of the finished product to the customer.
Lean production This term refers to a range of cost, time and waste-saving measures used by Japanese
manufacturing firms. These include just in time, shorter lead-times, Kaizen, benchmarking
and cell production
Quality assurance This term refers to the attempt to achieve customer satisfaction, by ensuring that the
business sets certain quality standards and publicises the fact that these standards are met
throughout the business.
Quality circle This is a group of workers that meets at regular intervals in order to identify any problems
with quality within production, consider alternative solutions to these problems, and then
recommend to management the solution that they believe will be the most successful.
Quality control This is the process of checking the quality and the accuracy of raw materials and the
finished products. This is usually carried out either by quality inspectors or by the
employees themselves.
Reorder level This is the minimum amount of stock that a business will hold before it re-orders some
from its suppliers.
Stock control This is the system used to ensure that the business always has sufficient stock available to
meet customer requirements - it focuses on four key variables: re-order levels, re-order
quantities, buffer stocks and lead times.
Stock rotation This is the process of ensuring that the older batches of stock are used first.
Total Quality
Management
(TQM)
This is the attempt by a business to stop errors occurring at all levels within the
organisation, and to try to encourage all employees to make 'quality' paramount within
their daily activities (whether in production, marketing, personnel, etc.).
-
7/25/2019 Business Studies Glossary S-cool
31/46
30
Zero defects This is the ultimate objective for a business - producing every product with no defects,
therefore eliminating waste and the time taken to correct mistakes. Zero defects can leadto an improved reputation and increasing levels of both sales and profitability.
-
7/25/2019 Business Studies Glossary S-cool
32/46
31
Production Decision Making
Batch production This method of production involves the manufacture of an item being divided into a
number of small tasks. A collection (or 'batch') of items each have one of these tasks
completed, and then the batch moves onto the next manufacturing task.
Capital intensive This means that the manufacture of an item relies heavily on machinery (e.g. computer-
operated robotic systems) rather than on labour. Industries which are capital-intensive
include car manufacturing and oil extraction.
Cell production This method of manufacturing an item organises workers into 'cells' within the factory,
with each cell comprising several workers who each possess different skills. Each cell is
independent of the other cells and will usually produce a complete item.
Critical activity This is an activity which is on the critical path. If this activity is delayed, then the project
will not be able to be completed on time.
Critical path These are the activities that must be completed in as little time as possible, in order that
the duration of the project can be minimised. The critical path can be found by
identifying the activities that have no float time. These activities must be closely
supervised, since any delay will delay the completion of the project.
Critical path analysisThis is a way of showing how a lengthy and complex project (e.g. a building project) can
be completed in the shortest possible time. The project is broken down into a number of
separate activities, and each activity is then placed in the correct sequence, so to
minimise the duration of the project.
Diseconomies of
scale
This refers to a situation where a business becomes inefficient in its production methods
and the long-run average cost (i.e. the cost per unit) starts to rise.
Division of labour This means breaking down the production of an item into many small, repetitive tasks,
with each task then being completed quickly by a single worker (or by a small group of
workers). As each worker is specialising in just one small task, then he/she should
become very efficient and his/her productivity level should rise.
Economies of scale This refers to a situation where a business becomes more efficient in its production
methods and the long-run average cost (i.e. the cost of making each unit) starts to fall.
-
7/25/2019 Business Studies Glossary S-cool
33/46
32
Float time This refers to the amount of spare time that is available to complete an activity in a
project which is using critical path analysis.
Flow production This method of production involves the tasks which were identified in 'batch' production
becoming continuous for each unit, often with the use of a moving conveyor belt (e.g. a
car assembly line). Each unit is produced individually, instead of being produced in
batches. This type of production is usually undertaken by large businesses.
Industrial inertia This term is used to describe the situation when a business or an industry decides to
remain in its original location and is very reluctant to relocate, even after the reasons for
it locating there in the first place are exhausted.
Industrial location This is the decision that a business or an industry makes concerning its geographical
placing in a country. There are many factors which affect the decision of where to locate
in a country, including the proximity to the market, the proximity to suppliers, the cost
of land and the availability and cost of labour.
International
competitiveness
This term refers to the ability of a business to compete effectively with foreign
competitors in a particular industry, based on factors such as price, quality, and leadtimes.
Job production This method of production involves an item being manufactured entirely by one worker
or by a group of workers. The items are often made to customer requirements, rather
than being mass produced. This type of production is usually undertaken by small
businesses.
Productivity This is a measurement of the level of efficiency of a business. It measures the
relationship between the level of inputs and the output of a business. The most common
measure is labour productivity (output per worker).
Research and
development (R and
D)
This means carrying out extensive research about how a product can be designed,
manufactured, packaged, etc, and then developing a prototype of the product which can
then be test-marketed. If the test-market is successful, then the product is likely to be
launched nationally.
Specialisation This refers to the division of a large project into a number of small tasks, enablingindividual workers to develop particular skills (specialise) in one or two of these tasks.
-
7/25/2019 Business Studies Glossary S-cool
34/46
33
Both Frederick Taylor and Henry Ford were advocates of the division of labour, enabling
the mass production of items at a low average cost.
-
7/25/2019 Business Studies Glossary S-cool
35/46
34
External Environment
Balance of payments. This is a record of a country's financial transactions with the rest of the
world over a given period of time (normally 12 months). It records the
flows of imported and exported goods and services, as well as any flows of
capital into and out of the country.
Deregulation. This is the removal of any government rules and regulations from the
operation of an industry, often allowing new competitors to enter the
industry.
Devaluation. This is the decision by the government of a country to reduce the value of
its currency in relation to foreign currencies. This boosts the international
competitiveness of the country's exports, by making them cheaper for other
countries to purchase.
Direct taxation. This is tax that is paid directly from the income, wealth or profit of an
individual or a business (e.g. income tax, corporation tax).
Economic growth. This term refers to a growth in the income per capita (or income per head)
of the population over a given period of time. It is normally measured by
reference to G.D.P. and G.N.P.
Environmental audit. This is an independent and critical review and appraisal of the business in
aspects such as its levels of pollution, waste and recycling. An
environmental audit is often carried out as part of a social audit.
Ethics. These are moral principles and judgements that many people believe
should be considered when a business makes any decision.
European Union (E.U). This was formed in 1993, following the Maastricht Treaty, replacing the
European Community (E.C). It consists of the following 15 member
countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece,
Ireland, Italy, Luxembourg, Netherlands, Portugal, Spain, Sweden, and the
UK. The Treaty of Rome (1957) established the E.E.C, and the main
objective was to remove all the trade barriers (financial, physical and
technical) between the member states.
-
7/25/2019 Business Studies Glossary S-cool
36/46
35
Exchange rate. This is the external price of a country's currency, expressed in terms of
another currency.
External costs. These are the detrimental consequences of the activities of a business that
are paid for by society as a whole (e.g. pollution, congestion).
Fiscal policy. This is a government policy which deals with raising finance (through
taxation) and then spending this finance on public services such as
education, health, transport).
Gross Domestic Product (G.D.P). This is the total value of a country's output over a period of time (usually
12 months). It is used to indicate changes in economic growth and the
standard of living in a country.
Gross National Product (G.N.P). This is calculated by adding G.D.P. to the net income from abroad (i.e. the
income earned on overseas investments by UK citizens and businesses,
minus the income earned by foreigners investing in the UK). Again, G.N.P.
is a main indicator of changes in economic growth and the standard of
living in a country.
Indirect Taxation. This is tax that is paid on goods and services, (e.g. VAT and excise duty).
Inflation. This is a general and sustained rise in the average prices of goods and
services within an economy over a period of time. It is calculated by
reference to the Retail Price Index (R.P.I).
Monetary policy. This is a government policy which is designed to control the amount of
spending in an economy, by altering the money supply, interest rates,
exchange rates and the amount of credit available to customers.
Monopolies and Mergers
Commission (M.M.C).
This is an organisation that was established by the government in 1948,
designed to investigate and monitor proposed mergers and takeovers of
large businesses and to ensure that any businesses with monopoly power
do not act against the public interest. In general, any business with a
market share of 25% or more is likely to be investigated.
-
7/25/2019 Business Studies Glossary S-cool
37/46
36
Nationalisation. This occurs when businesses and industries are transferred from the private
sector to the public sector.
Office of Fair Trading (O.F.T). This is a government body, which was established to ensure that
businesses were meeting the requirements of the Fair Trading Act 1973. It
has the power to recommend any business to the M.M.C. for further
investigation, if it feels that they are acting against the public interest.
Pressure group. This is an organisation that develops in order to tackle a matter of vital
interest to the members of the group, such as campaigning against
businesses which cause pollution, or test their products on animals, or
cause environmental damage. Pressure groups aim to raise as much
publicity and awareness of their cause as possible, in the hope that this will
stop the businesses from continuing their actions.
Privatisation. This generally refers to the transfer of large businesses from the public
sector to the private sector (i.e. from a nationalised industry to a P.L.C).
Protectionism. This refers to a government's policies of protecting its domestic businessesfrom more competitive foreign imported goods, by using barriers such as
quotas and tariffs.
Quotas. These are a method that a government can use to protect its economy
from a large influx of more competitive foreign imports. A quota places a
physical restriction on the number of units of a product that are allowed to
enter the country.
Recession. This refers to a situation where the G.D.P. of an economy has fallen for two
successive quarters. It is characterised by falling customer demand, low
investment, and rising unemployment.
Regional Policy. This is a government policy which attempts to reduce regional inequalities
of employment, income and wealth, by investing money in, and enticing
businesses to move to, the less affluent areas of the country.
Social Audit. This is an independent and critical review and appraisal of the business inaspects such as its level of pollution, its use of recycled materials, and the
-
7/25/2019 Business Studies Glossary S-cool
38/46
37
health and safety of the workforce.
Social Cost. This measures the total cost to society of the activities of a business. Social
costs are equal to the internal costs of the business plus the external costs
faced by society.
Social Responsibilities. These are the duties that a business has towards the people who are
affected by its activities (e.g. customers, employees, suppliers, the local
community).
Tariff. This is another method that a government can use to protect its domestic
businesses from a large influx of more competitive foreign imports. A tariff
is a tax placed on an imported good.
Trade Cycle. This refers to the fluctuation of employment, income and wealth in a
country over time. Terms such as 'recession', 'slump', 'recovery', and 'boom'
are associated with the trade cycle.
Unemployment. This refers to the number of people in the workforce in a country who arelooking for a job, but cannot find one.
-
7/25/2019 Business Studies Glossary S-cool
39/46
38
Management, Leadership, Motivation and Communication
Absenteeism. This measures the proportion of the workforce who are absent from in a given period of
time. Ideally, the business would wish the figure to be as low as possible, since a high
figure could indicate low levels of morale, job satisfaction and motivation.
Accountability. This measures the extent to which an employee is held responsible for the successful
completion of a task or a piece of work.
Autocratic
leadership style.
This is often referred to as an authoritarian leadership style, and it basically means that
the people at the top of an organisation make all the decisions and delegate very little
responsibility down to their subordinates.
Chain of command. This is the direct relationship between a superior and the people working beneath him.
Communication
channels.
These are the routes within a business through which communication happens.
Culture. This term refers to the shared values, beliefs and norms which exist amongst theworkforce in a business.
Decentralisation. This means passing responsibility and authority away from the headquarters of the
business to regional offices and departments.
Delayering. This process involves one or more layers of management in the organisational hierarchy
being removed, in order to cut costs and improve communication flows.
Delegation. This occurs when managers pass a degree of authority down the hierarchy to their
subordinates.
Democratic
leadership.
This involves managers and leaders taking into account the views of the workforce before
implementing any new system.
Empowerment. This involves a manager giving his subordinates a degree of power over their work (i.e. it
enables the subordinates to be fairly autonomous and to decide for themselves the best
way to approach a problem).
-
7/25/2019 Business Studies Glossary S-cool
40/46
39
Hawthorne effect. This resulted from Elton Mayo's studies of employee behaviour between 1927 and 1932.
It states that employees are more likely to be motivated and more productive if theyhave a degree of social interaction with their peers and also with management.
Human Relations
School.
This term refers to managers who follow Elton Mayo's views on the importance of social
interaction at work.
Job enlargement. This involves increasing the number of tasks which are involved in performing a particular
job, in order to motivate and multi-skill the employees.
Job enrichment. This is a method of motivating employees by giving them more responsibilities and the
opportunity to use their initiative.
Job rotation. This involves the employees performing a number of different tasks in turn, in order to
increase the variety of their job and, therefore, lead to higher levels of motivation.
Kaizen. This is a Japanese word which means 'continuous improvement'. It is widely held that
any aspect of the business can be improved - not just the production processes.
Layers of hierarchy. This term refers to the number of levels within the structure of the business, from senior
management at the top to shop-floor employees at the bottom.
Management. This is the process of achieving the objectives of the business by using its available
resources effectively.
Management byobjectives.
This involves each manager setting objectives for himself, based on the overall objectivesof the business. It was first developed by Peter Drucker.
Matrix
management.
This is the term given to describe the situation where a number of employees from
different departments within the business are asked to temporarily work together to
achieve, say, the successful launch of a new product. Each person in the team will then
be accountable to their departmental manager as well as the team manager.
Paternalistic
leadership style
. This is fairly autocratic in its approach to dealing with employees, although their social
and welfare needs are taken into account when a decision is made that will affect them.
-
7/25/2019 Business Studies Glossary S-cool
41/46
40
Performance-
related pay (PRP).
This is a method of giving pay rises on an individual basis, related to the employee
achieving a number of targets over the past year.
Piece-rate. This payment method involves the employee receiving an amount of money per unit (or
per 'piece') that he produces. Therefore his pay is directly linked to his productivity level.
Organisational
chart.
This is a diagram which shows the different departments within the business, the chain
of command, the span of control of each manager, and the channels of communication.
Span of control. This refers to the number of subordinates who are accountable to a specific manager.
The span of control is described as 'wide' if there are many subordinates reporting
directly to a manager.
Team working. This is the opposite production technique to an assembly-line which uses an extreme
division of labour. Team working involves a number of employees combining to produce
a product, with each employee specialising in a few tasks. Cell production is an example
of team working.
Theory X Theory X is a very authoritarian management style, which assumes that employees need
constant supervision, they will avoid performing their jobs if they can, they do not seek
responsibility, they prefer to be told what to do, and they are really only interested in job
security.
Theory Y. Theory Y, on the other hand, is a management style which assumes that employees wish
to be given praise and recognition for their achievements, they like to be given
responsibility at work, and they wish to use their imagination, creativity and initiative.
Theory Z. This refers to the Japanese style of management (which is similar to McGregor's Theory
Y) and it focuses on a job for life, a strong corporate culture, extensive training for all
employees, and the involvement of employees in the decision-making process.
Worker
participation.
This refers to the participation of workers in the decision-making process, asking them
for their ideas and suggestions.
Works council. This is a type of worker participation and it consists of regular discussions between
managers and representatives of the workforce over such issues as how the business can
-
7/25/2019 Business Studies Glossary S-cool
42/46
41
improve its processes and procedures.
-
7/25/2019 Business Studies Glossary S-cool
43/46
42
People in the Workplace
Arbitration. This is the process of resolving an industrial dispute by using an independent person to
decide the appropriate outcome. The arbitrator will look at the arguments put forward
by both parties, and then he will arrive at a decision. The decision can be legally binding
on both parties if this was agreed prior to the arbitrator's decision.
Advisory Conciliation
and Arbitration
Service (ACAS).
This was set up by the government in 1975 as an independent body that helps to settle
industrial disputes and claims of unfair dismissal by employees. As the name suggests,
there are three main services that are offered by ACAS - advice, conciliation and
arbitration.
Collective
bargaining.
This is when a trade union negotiates with the management of a business on behalf of a
large number of employees. The negotiations cover aspects of employment such as
pay, working conditions and working practices.
Conciliation. This is one of the services offered by ACAS in an attempt to get the two sides in an
industrial dispute to resolve their differences. A conciliator listens to the arguments of
both sides, and then tries to encourage the trade union and the employer to negotiate
and compromise so that they can reach a solution that is acceptable to both parties.
Consultation. This involves the management of a business asking for the views of the employees who
will be affected by a decision.
Human Resource
Management (HRM).
This is the management and welfare of the personnel of the business. It includes the
recruitment process, training and development of employees, and termination of
employment.
Individual
bargaining.
This is the opposite to collective bargaining. It involves a business negotiating with each
individual employee over their pay and conditions of employment, rather than
negotiating with the workforce as a whole.
Induction. This is the training that an employee receives when he joins a business. It is designed to
familiarise him with his new job and with the procedures and systems of the business
(e.g. health and safety, and organisational structure), as well as make him aware of the
products and services that are provided by the business.
-
7/25/2019 Business Studies Glossary S-cool
44/46
43
Industrial action. This refers to the actions that can be taken by a unionised workforce during an industrial
dispute, in an attempt to reduce or cease the output of the business. The most commonexamples of industrial action include strikes, work-to-rule policies, and overtime bans.
Industrial dispute. This is a disagreement that arises between the management of a business and the trade
union that represents the employees, over such issues as pay rises, working conditions,
and new working practices.
Industrial relations. This refers to the level of co-operation which exists between the management of a
business and the trade union which represents its workforce.
Industrial tribunal. This is a small court which deals with claims of unfair dismissal and discrimination from
employees against their (former) employers.
Labour flexibility. This refers to the ability of a business to vary the jobs and the tasks which are carried
out by their employees, using such strategies as job rotation and multi-skilling.
Labour turnover. This measures the number of employees who leave a business per year, expressed as a
percentage of the total number of people employed
Pendulum
arbitration.
This is a type of arbitration in which the arbitrator will decide completely in favour of one
party or the other, with no compromise or negotiation being allowed. It is likely,
therefore, that both parties (the employers and the trade union representatives) will
make their demands more conservative and realistic than if the arbitrator was allowed to
choose an outcome which was somewhere between the two.
Performance
appraisal.
This is the process of measuring the effectiveness of an employee, often using it as the
basis for a promotion or a pay rise. The appraisal is usually carried out by the immediate
superior on a one-to-one basis, although other appraisal techniques are very common
(including self-appraisal, peer appraisal or appraisal by one's subordinates). The whole
process should highlight the employees' strengths and weaknesses, and also indicate
those areas which the employee needs to concentrate on in order to improve his
performance.
Performance-related
pay (PRP).
This is a method of giving pay rises on an individual basis, related to the employee
achieving a number of targets over the past year.
-
7/25/2019 Business Studies Glossary S-cool
45/46
44
Productivity. This is the relationship between the inputs that a business uses (e.g. raw materials,
labour) in order to produce its output (e.g. products). The most common measure islabour productivity, which is calculated as output per worker.
Trade union. This is an organisation consisting of a large number of workers who combine together to
protect their interests in the workplace. The workers each pay an annual membership
fee to join the trade union, and in return the union will negotiate on their behalf on such
issues as pay, working conditions and new working practices.
Unfair dismissal. This occurs where an employer terminates the contract of employment of an employee
for a reason that is against the law (e.g. pregnancy, ethnic background, or gender). If
an employee believes that he has been unfairly dismissed, then he can take his
employer to an industrial tribunal, which will rule on whether the dismissal was unfair or
not.
Worker participationThis refers to the participation of workers in the decision-making process, asking them
for their ideas and suggestions.
Works council. This is a type of worker participation and it consists of regular discussions betweenmanagers and representatives of the workforce over such issues as how the business
can improve its processes and procedures.
-
7/25/2019 Business Studies Glossary S-cool
46/46
Terms and conditions
All S-cool content (including these notes) belong to S-cool (S-cool Youth Marketing Limited).
You may use these for your personal use on a computer screen, print pages on paper and store such pages in
electronic form on disk (but not on any server or other storage device connected to an external network) for
your own personal, educational, non-commercial purposes.
You may not redistribute any of this Content or supply it to other people (including by using it as part of any
library, archive, intranet or similar service), remove the copyright or trade mark notice from any copies or
modify, reproduce or in any way commercially exploit any of the Content.
All copyright and publishing rights are owned by S-cool. First created in 2000 and updated in 2013.