AAB
OS
S, M
inin
g &
Uni
vers
als
224♦ A = Very Common Item - Good Stock ♦B = Common Item - Moderate Stock♦ C = Less Common Item ♦P = Production ♦N = Check for availability
Refer to the Technical Section on the selection, installation, use and maintenance of hose & fittings prior to use.
© 2019 New-Line Hose & Fittingsnew-line.com
Brass(PrefixHB)
Female NPT Adapter NPT Part ♦ Std Std Size Number Material Stk Price/ea Pkg 3/8" FS6PlatedSteel N 1 1/2 FS8PlatedSteel C 1 3/4 FS12PlatedSteel C 1 1 FS16PlatedSteel C 1 1/2 FB8BrassN 1 3/4 FB12 Brass C 1 3/4 FSS12StainlessSteelN 1 With Locking Sleeve 1/2" FLS8PlatedSteelC 1 3/4 FLS12PlatedSteelC 1 3/4 FLSS12 StainlessSteelN 1
Platedw/LockingSleeve(PrefixFLS)
Double lock couplings, commonly known as Thors or Nationals, are used primarily on air or water hose where "traditional" Quick Connects or Universals are not suitable, and a heavier duty, safer, more durable coupling is needed. These fittings are suitable for 300psi and will permit full flow when coupled and are designed to safely handle greater pressures than universal quick acting couplings. They also have a streamlined design to prevent hang-ups, and the heads can be easily gripped with or without the use of gloves. The "double lock" feature provides maximum safety against unintentional disconnection; users must pull the sleeve back while simultaneously rotating the fitting in order to disconnect (do not disconnect when under pressure). Furthermore, a spring-lock clip can be inserted so that the fitting cannot be disconnected without removing the clip. We offer a standard barbed hose end as well as a "crimped" hose end for added safety against coupling blow out.
381
$29.9632.4432.5534.8979.9378.00173.46
$48.7248.72335.28
Hose End* Hose Part ♦ Std Std Size Number Material Stk Price/ea Pkg 3/8" HS6 PlatedSteel C 1 1/2 HS8 PlatedSteel B 1 3/4 HS12 PlatedSteel B 1 1 HS16 PlatedSteel C 1 3/4 HB12 Brass C 1 3/4 HSS12 StainlessSteel N 1 Crimp-Tech 3/4" TLH-3 PlatedSteel C $58.51 1*Available with crimp on ferrule upon special request.
$44.5538.1740.4058.28105.21401.92
Gaskets & Safety Clips Part ♦ Std Bulk Bulk Size Number Material Stk Price Price Pkg All G-100 Buna-N A 50 All G-200 Viton C 50 Reg 203-W(Clip) Clip C 50 ForLS 200-S(Clip) Clip C 50
$5.1211.825.704.49
$3.417.883.803.06
Male NPT Adapter NPT Part ♦ Std Std Size Number Material Stk Price/ea Pkg 3/8" MS6 PlatedSteel C 1 1/2 MS8 PlatedSteel C 1 3/4 MS12 PlatedSteel B 1 1 MS16 PlatedSteel C 1 1/2 MB8 Brass N 1 3/4 MB12 Brass N 1 3/4 MSS12 StainlessSteelN 1 With Locking Sleeve 3/8" MLS6 PlatedSteel C 1 1/2 MLS8 PlatedSteel B 1 3/4 MLS12 PlatedSteel B 1 3/4 MLSS12 StainlessSteel N 1
$25.9520.9422.8329.9674.7079.33170.48
series a douBle lock Quick actinG couPlinGs
Platedw/LockingSleeve(PrefixMLS) Brass
(PrefixMB)
Brass(PrefixFB)
$43.1235.9335.93350.43
Section 12.15 Restraining devices Effective means of restraint must be used (a) On a connection of a hose or a pipe if inadvertent disconnection could be dangerous to a worker (b) If unplanned movement of an object or component could endanger a worker
(c) To secure an object from falling and endangering a worker
HosePro Recommends:
Whipcheck Safety Cables are to be used on all Heavy Duty Air Hose Assemblies. Shown properly installed with no slack, fully extended.
PlatedSteel(PrefixHS) StainlessSteel(PrefixHSS)
Crimp-Tech PlatedSteel(PrefixMS) StainlessSteel(PrefixMSS)
PlatedSteel(PrefixFS) StainlessSteel(PrefixHFSS)
