Download - Battery Model
![Page 1: Battery Model](https://reader036.vdocuments.site/reader036/viewer/2022062300/563dbb74550346aa9aad506f/html5/thumbnails/1.jpg)
1
An Electrochemistry-Based Battery Impedance Model for Lithium-ion Batteries
Leonardo Ramos
![Page 2: Battery Model](https://reader036.vdocuments.site/reader036/viewer/2022062300/563dbb74550346aa9aad506f/html5/thumbnails/2.jpg)
2
Outline Electrochemical Impedance Spectrum (EIS) Impedance Model of Lithium ion Batteries Schematic of a Li-ion Battery Internal Resistance (RS) Inductance (L) Double-layer Capacitance (Cdl) Charge-transfer Resistance (Rct) References
![Page 3: Battery Model](https://reader036.vdocuments.site/reader036/viewer/2022062300/563dbb74550346aa9aad506f/html5/thumbnails/3.jpg)
3
Electrochemical Impedance Spectrum (EIS)
![Page 4: Battery Model](https://reader036.vdocuments.site/reader036/viewer/2022062300/563dbb74550346aa9aad506f/html5/thumbnails/4.jpg)
4
Schematic of a Li-ion Battery
![Page 5: Battery Model](https://reader036.vdocuments.site/reader036/viewer/2022062300/563dbb74550346aa9aad506f/html5/thumbnails/5.jpg)
5
Impedance Model of Lithium ion Batteries
Parameters: L: electrode inductance. RS: internal resistance. Cdl: double-layer capacitance. Rct: charge-transfer resistance.
![Page 6: Battery Model](https://reader036.vdocuments.site/reader036/viewer/2022062300/563dbb74550346aa9aad506f/html5/thumbnails/6.jpg)
6
Internal Resistance (RS)
Type of Resistance Internal resistance of cell (RS = ionic resistance + electrical resistance + interfacial resistance)
Ionic • Electrode (cathode and anode) particle• Electrolyte
Electrical • Electrode (cathode and anode) particle• Conductive additives• Percolation network of additives in electrode • Current collectors• Electrical taps
Interfacial • Between electrolyte and electrodes• Between electrode particles and conductive additives• Between electrode and current collector• Between conductive additives and current collector
![Page 7: Battery Model](https://reader036.vdocuments.site/reader036/viewer/2022062300/563dbb74550346aa9aad506f/html5/thumbnails/7.jpg)
7
Inductance (L) The impedance of the Li-ion battery at high frequency is
dominated by its inductive behavior. The inductance is attributed to:
the porosity of the electrodes; the electrode geometry; the conductive path formed by the terminals, connectors
and electrodes. The inductance parameter is geometrical and not
electrochemical.
![Page 8: Battery Model](https://reader036.vdocuments.site/reader036/viewer/2022062300/563dbb74550346aa9aad506f/html5/thumbnails/8.jpg)
8
Double-layer Capacitance (Cdl) A charge zone is formed on the layer between the
electrode and electrolyte. Caused by the short distance and the large surface in
porous electrodes.
![Page 9: Battery Model](https://reader036.vdocuments.site/reader036/viewer/2022062300/563dbb74550346aa9aad506f/html5/thumbnails/9.jpg)
9
Charge-transfer Resistance (Rct) Charge-transfer at the electrode interface in which
oxidation-reduction occurs:
Indicative of the kinetic rate of charge transfer reactions.
As, Cdl is on the electrode surface, it occurs in parallel to the electrochemical charge transfer reaction.
RCT//Cdl form a low-pass filter for the charge transfer reaction. Cdl can only carry alternative currents with a high frequency.
![Page 10: Battery Model](https://reader036.vdocuments.site/reader036/viewer/2022062300/563dbb74550346aa9aad506f/html5/thumbnails/10.jpg)
10
References P. Moss, “Study of Capacity Fade of Lithium-Ion Polymer Battery With
Continuous Cycling & Power Performance Modeling of Energy Storage Devices,” PhD Thesis, The Florida State University, 2008.
Jossen A. “Fundamentals of battery dynamics,” Journal of Power Sources, 2006, 154:530–8.
Mantia, F. A., “Characterization of Electrodes for Lithium-Ion Batteries through Electrochemical Impedance Spectroscopy and Mass Spectrometry,” PhD Thesis, ETH ZURICH, 2008.
D. Linden, “Handbook of Batteries,” 3rd edition, McGraw-Hill, 2002. M. Park, et al., “A review of conduction phenomena in Li-ion batteries,”
Journal of Power Sources, 2010, v. 195, p. 7904-7929. L.H.J. Raijmakers, et al., “Sensorless battery temperature measurements
based on electrochemical impedance spectroscopy,” Journal of Power Sources, 2014, v. 247 , p. 539-544.