ENCLOSURE (1)
BALTIMORE GAS AND ELECTRIC COMPANY
INSERVICE INSPECTION SUMMARY REPORT
FOR CALVERT CLIFFS UNIT 2
ASME BOILER AND PRESSURE VESSEL CODE SECTION XI, FORM NIS-1
9908110158 990806 PDR ADOCK 05000318 a PDR
Page I of 3 NIS-1
OWNER'S REPORT FOR INSERVICE INSPECTIONS (As required by the Provisions of the ASME Code Rules)
1. Owner Baltimore Gas and Electric Company, P.O. Box 1475, Baltimore, MD. 21203
(Name and Address of Owner)
2. Plant Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusby, MD., 20657-4702
(Name and Address of Plant)
3. Plant Unit 2
4. Owner Certificate of Authorization (if required) N/A
5. Commercial Service Date 04/01/1977
6. National Board Number for Unit 20912
7. Components Inspected
Component or Appurtenance
Reactor Pressure
Pressurizer
Steam Generator #21
Steam Generator #22
Reactor Coolant
Manufacturer or Installer
Combustion Engineering
Combustion Engineering
Combustion Engineering
Combustion Engineering
Combustion Engineering
#21A Reactor Coolant Byron Jackson
Manufacturer or Install( Serial No.
CE-67108
CE 67603
CE 67506
CE 67507
N/A
Pi~inpS1-n-or4s
1-urn',
#21B Reactor Coolant Byron Jackson
#22A Reactor Coolant Byron Jackson
#22B Reactor Coolant Byron Jackson
681-N-0442
681-N-0443
P1,M- I. ... ,,
er State or National Board No. Province No.
14001-NV 20912
14001-NV 120916
14001-NV 120924
14001-NV 120925
N/A N/A
14001-NV N/A
14001-NV N/A
I M•I.NV ;N/AI
Safety Injection Bechtel N/A NA 'N/A
PininV/SuDors ____
Pressurizer Spray I Bechtel N/A N/A N/A
Pinine/Sunmorts I _
Shutdown Cooloing Bechtel ANIA N/A N/A
Pinine/Sunvors N/A __/A
Pressurizer Safety & Relief Bechtel N/A N/A N/A
Pivine/Su••orts ;
Charging PipingoSupports Bechtel N/A N/A N/A
Letdown Piping/Supports Bechtel N/A N/A N/A
Main Steam I Bechtel N/A [NA N/A
PivintSurnorts A
Feedwater PipingoSupports Bechtel N/A N/A N/A
Regenerative Heat VWhitlock
ExctlanLer -
75252
to 5/6/1999S. Examination Dates 6/30/1997
. �a3�w � + I
N/A,,681-N 0444
N/A
to5/6442NV
essc n t
Pumv
681-N-04•!
14001-INV
NOV-i9-1Y39 10:32 BGE NUCLEAR REG MATTERS -41L: 4W suG? F.u2 Du
NISel Page 2 of 3
9. inspection Period identification: 1996 to 1s99
10. lnspcction Interval Identification: 1988 to 1999
Il.Applicable Editon of Section X 1983 ..... Addenda Summer 83
12. Datelrlvision of Inspection Plan: October 1994, Change 5
13. Abst•a of Examinations W Tests. Include a list of examinations and tests and a statement concerning status of work rcquircd for the
inspection Plan. The examinations reported herein constitute the twelfth report of Inservice Inspections performed at Calvert Cliffs Unit 2. end
the second report within the third period of the second Interval of commercial operation. The examnnations for the second
Interval as required by the Long-Term ExminatiOn Plan for Calvert Cliffs Unit 2. were performed In accordance with the 1983
Edition of ASME Code Section XA with Addenda through Summer, 1983. Nondestructive examination data and procedures are
available at the plant site for review.
14, Abstmct of Results of Examinations and Tests.
1. Eddy current examinations of #21 and #22 Steam Generators In 1999 revealed signs of less severe steam generator tube
degradation than that seen In the 1997 examliation. Results of #21 Steam Generator examinations showed that 253 tubes
were defective. Inspection of #22 Steam Generator revealed that 301 tubes were defective.
2. Volumetric examination to satisfy the Ten-Year Inservice Inspection of the Reactor Pressure Vessel (RPV), detected nine
non-geometric subsurface Indications. Eight were located in six different RPV shell welds and one Indication was located in
one nozzle - to - shell weld.
3. The Unit 2 Containment moisture barrier was scheduled for replacement due to damage caused by aging and poor worker
practices In the.area during previous outages. Examinations required by ASME Xl Class MC, detected degradation of the
Containment finer plate below the seal area (considered an inaccessible area). Corrosion and pitting were evident The visual
examination was supplemented with ultrasonic thickness testing and depth measurements to determine the remaining
Containment liner thickness. The three most severe locations were eected and the results Indicated that the Containment
liner thickness was reduced In these areas due to wastage and exceeded 10% of the nominal wail.
15. Abstract of Corrective Measures.
1. The defective tubes In #21 Seam Generator were plugged, Increasing the number of plugged tubes to 95W (11.2%). The
defective tubes in #22 Steam Generator were also plugged, increasirig its total to 744 (8.1%) tubes plugged.
2. The non-geometric Indications detected during volumetric exanilnation of the Unit 2 Reactor Pressure Vessel were sized
and determined to be Code-allowable per 1W4-3500 of ASME §ection XA.
3. The visual examination of the Unit 2 moisture barrier was supplemented with ultrasonic thickness testing and depth
measurements to determine the remaining Containment indr thickness. The three most severe locations were selected and the
results Indicated that the liner thickness In these areas was reduced due to wastage caused by corrosion and exceeded 10% of
the nominal wall. An Engineering Evaluation was performed under ESI 99900382 and found the remaining wall thickness was
acceptable without repair. The mot cause of the degradation was determined to be the Inadequate moisture barrier seal
provided by the old type sealant. The seat had failed due to aging and poor work practices. Corrective actions included coating
of the Containment liner surface below the floor grade, installation of a high density elastomer which provides superior sealing
capabilities, and continued examinations of the moisture barrier seal during system engineer walkdowns. Long-term corrective
actions Include an inspection of the previously identified areas with the most severe degradation, a verification of the assumed
corrosion rate in the Engineering evaluation, inspection of the Containment liner around Steam Generator pedestals and
buttresses for similar corrosion, and evaluation of the need to examine Unit-l's moisture barrier during the upcoming refueling
outage.
We certify that a) the statments, made in this report are correct. b) •he examinations and tests meet die Inspection Plan as required by the
ASME Code, Section XI. and ) cor4ecdve measures takein conform to die rules of the ASME Code. Section XI.
Certificate of Authorization No. (If applicable) NIA Expiritnoe Date FJ1A
Daute TOTAL -. d 2S cull . ly al
4 TOTAL P.02
-4if 4'35 F.6 0P.2 F0NOV-19-1'999 10:32 BGE NUCLEAR REG MATTERS
Page 3 of 3
NIS-1
CERTIFCATE OF INSERVICE INSPECTION
I. the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectores and the State or provinces of
4 ~~~~and employed by AA qn vAlftyA
lJnolkcO 1A OA have inspected the components described in this Owner's Reptaduring the peroid
____• - _ 9-7 to ',5,(and state that to the best of my knowledge and belief, the Owner has performed
examinations and tests and taken corrective measures described in this Owner's Report in accordance with the inspection plan and as required by the ASME
Code, Section Xl.
By signing this certificate neither the Inspector nor his employer makes and any warranty, expressed or implied, concerning the examinations, tests, and
corrective measures described in this Owner's Report. Furthemore, neither the Inspector nor his employer shall be liable in any manner for any personal
injury or property damage or a loss of any kind arising from or connected with this inspection.
/2 / L I - ('nmmkdnw� i ID � '2 � A All' �'*tA I.
Inspc 'signaurCNational Board. State, Province, and Endorsements
Date 7 9
of
aie ATTACHMENT 1 Page 1 of 33
Inservice Inspection Report 3W3/
1. Owner. Baltimore G•
2. Plant Calvert Cliff
3. Plant Unit: 2 4. Owner Certificate of Authorization( If Req.) N/A
5. Commercial Service Date: 04/01/1977
6. National Board Number for Unit: 20912
as and Electric Company. P.O. Box 1475. Baltimore, MD. 21203
Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusby, MD.. 20657-4702
EXAM CATEGORY I ITEM NUMBER: - I
INTERIOR ATTACHMENTS AND CORE SUPPORT STRUCTURES
Summary/ID No. Component ID Component Description Comments
101362 NOZZLES CHARGING INLET, SAFETY INJECTION AND SURGE NOZZLES
Exam Results 99VE034 Accept
INTERIOR SURFACES AND CORE SUPPORT STRUCTURES
Summary/ID No. Comconent ID Component Description Comments
101361 CORE SHROUD WELDS CSW WELDS NEAR FUEL AREA
Exam Results 99VE033 Accept
AM CATEGORY I ITEM NUMBER: B-A B-RFO12
RPV CIRC WELDS
Summarv/ID No. Comoonent ID Component Descriotion Comments
001000 8-203 UPPER TO MIDDLE SHELL ONE AUTSLIC40 INDICATION WAS SIZED WITH AUTSUC20 AND AUTSUC35 SEARCH UNITS AND FOUND ALLOWABLE IN ACCORDANCE WITH IWB3510-1. SEE CNF BGE001. D70187-2/D70389-1.
Exam Results 99VE001 Accept
EXAM CATEGORY I ITEM NUMBER: B-A IB1.11
RPV CIRC WELDS
Summary/1D No. Corronent ID Component Description Comments
001020 10-203 LOWER SHELL TO LOWER HEAD MMITED EXAM DUE TO PROXIMITY OF CORE SUPPORT LUGS AND FLOW SKIRT. TWO AUTSLIC40 INDICATIONS WERE SIZED WITH AUTSLIC20, AUTSUC35 AND AUTSUC40 SEARCH UNITS AND FOUND ALLOWABLE IN ACCORDANCE WITH IWB-3510-1. SEE CNF BGE002. D7018720D70389-1.
Exam Results 99VE003 Accept
001010 9-203 MIDDLE TO LOWER SHELL
Exam Results 99VE002 Accept
Page 2 of 33
1. Owner: Baltimore G•
2. Plant: Calvert CO
3. Plant Unit 2
4. Owner Certificate of Authorization( If Req.) N/A
5. Commercial Service Date: 04/01/1977
6. National Board Number for Unit: 2=1
as and Electric Company, P.O. Box 1475, Baltimore, MD. 21203
Nuclear Power Plant, 1650 Calvert Cliffs Parkway. Lusby, MD., 20657-4702
EXAM CATEGORY I ITEM NUMBER: B-A / B1.12
RPV LONG WELDS
Summary/ID No. Component ID Component Descriotion Comments
001170 3-203B LOWER SHELL AT 210 DEG.
Exam Results 99VE011 Accept
001180 3-203C LOWER SHELL AT 330 DEG.
Exam Results 99VE012 Accept
001160 3-203A LOWER SHELL AT 90 DEG. LIMITED EXAM DUE TO PROXIMITY OF SURVEILLANCE SPECIMEN TUBES. ONE AUTSUC40 INDICATION WAS SIZED WITH AUTSUC30 AND AUTSLIC40 SEARCH UNITS AND FOUND ALLOWABLE IN ACCORDANCE WITH IWB3510-1. SEE CNF BGE006. D70187-2/D70389-1.
Exam Results 99VE010 Accept
001140 2-203B MIDDLE SHELL AT 150 DEG.
Exam Results 99VE008 Accept
001150 2-203C MIDDLE SHELL AT 270 DEG. ONE AUTSUC40 INDICATION WAS SIZED WITH AUTSLIC30 AND AUTSUC40 SEARCH UNITS AND FOUND ALLOWABLE IN ACCORDANCE WITH IWB3510-1. SEE CNF005. D70187-2/D70389-1.
Exam Results 99VE009 Accept
001130 2-203A MIDDLE SHELL AT 30 DEG. TWO AUTSUC40 INDICATIONS WERE SIZED WITH AUTSLIC35 AND AUTSUC46 SEARCH UNITS AND FOUND ALLOWABLE IN ACCORDANCE WITH IWB3510-1. SEE CNF BGE004. D70187-2/D70389-1.
Exam Results 99VE007 Accept
001110 1-203B UPPER SHELL AT 210 DEG. ONE AUTSUC40 INDICATION WAS SIZED WITH AUTSLIC20 AND AUTSUC35 SEARCH UNITS AND FOUND ALLOWABLE IN ACCORDANCE WITH IWB3510-1. SEE CNF BGE003. D70187-2/D70389-1.
Exam Results 99VE005 Accept
120 1-203C UPPER SHELL AT 330 DEG.
texam Results 99VE006 Accept
ATTACHMENT 1
Inservice Inspection Report 3/32
1. Owner-. Baltimore GI
2. Plant: Calvert Cliffs
3. Plant Unit: 2
4. Owner Certificate of Authorization( If Req.) WA
5. Commercial Service Date: 04/01/1977
6. National Board Number for Unit: 20912
as and Electric Comoany. P.O. Box 1475. Baltimore, MD. 21203
Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusbv, MD., 20657-4702
001100 1-203A UPPER SHELL AT 90 DEG.
Exam Results 99VE004 Accept
EXAM CATEGORY / ITEM NUMBER: B-A I Bi.21
RPV CIRC HEAD WELDS
Suummary/lD No. Comment ID Comoonent Descriotion Comments
001190 4-204 LOWER HEAD DOME WELD
Exam Results 99VE013 Accept
EXAM CATEGORY I ITEM NUMBER: B-A 1 B1.22
RPV MERIDIONAL WELDS
irnarv/ID No. Component ID Comoonent Description Comments
1210 1-204A LOWER HEAD AT 30 DEG. UMITED TRANSVERSE AND PARRALLEL EXAMS DUE TO PROXIMITY OF FLOW SKIRT.
Exam Results 99VE014 Accept
EXAM CATEGORY I ITEM NUMBER: B-A l B1.30
RPV SHELL TO FLANGE WELD
Summarv/ID No. Compoent ID Component Description Comments
001270 7-203 FLANGE TO UPPER SHELL LIMITED TRANSVERSE EXAM DUE TO THE INSIDE SURFACE TAPER.
Exam Results 99VE015 Accept
ATTACHMENT 1 Page 3 of 33
Inservice Inspection Report 3W2
Page 4 of 33
1. Owner: 2. Plant: 3. Plant Unit: 4. Owner Certificate of Authorization( If Req.)
5. Commercial Service Date: 6. National Board Number for Unit:
Baltimore Gas and Electric Company. P.O. Box 1475, Baltimore. MD. 21203
Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusby, MD., 20657-4702
04/01/1977
20912
EXAM CATEGORY I ITEM NUMBER: B-D I B3.100
RPV NOZZLE IRS
Summary/ID No. Component ID Comgoonent Description Comments
101300 4-205B-IRS INLET NOZZLE AT 120 DEG.
Exam Results 99VE025 Accept
101310 4-205C-IRS INLET NOZZLE AT 240 DEG.
Exam Results 99VE026 Accept
101320 4-205D-IRS INLET NOZZLE AT 300 DEG.
Exam Results 99VE027 Accept
1290 4-205A-IRS INLET NOZZLE AT 60 DEG.
Exam Results 99VE024 Accept
101270 10-205A-IRS OUTLET NOZZLE AT 0 DEG.
Exam Results 99VE022 Accept
101280 10-205B-IRS OUTLET NOZZLE AT 180 DEG.
Exam Results 99VE023 Accept
ATTACHMENT I
Inservice Inspection Report 3/3W
ATTACHMENT 1 Page 5 of 33
Inservice Inspection Report 3W/2
1. Owner: Baltimore G4
2. Plant: Calvert Cli 3. Plant Unit: 2
4. Owner Certificate of Authorization( If Req.) N/A
5. Commercial Service Date: 04/01/1977
6. National Board Number for Unit: 20912
as and Electric Company. P.O. Box 1475. Baltimore, MD. 21203
Nuclear Power Plant, 1650 Calvert Cliffs Parkway. Lusby. MD., 20657-4702
EXAM CATEGORY I ITEM NUMBER: B-D I B3.90
RPV NOZZLE TO SHELL WELDS
Summarv/ID No. Comoonent ID Component Description Comments
101240 4-205B INLET NOZZLE AT 120 DEG. LIMITED EXAM DUE TO NOZZLE INNER RADIUS.
Exam Results 99VE019 Accept
101250 4-205C INLET NOZZLE AT 240 DEG. TRANSVERSE EXAM MMITED DUE TO NOZZLE INNER RADIUS.
Exam Results 99VE020 Accept
101260 4-205D INLET NOZZLE AT 300 DEG. UMITED TRANSVERSE EXAM DUE TO PROXIMITY OF NOZZLE INNER RADIUS.
• m Results 99VE021 Accept
101230 4-205A INLET NOZZLE AT 60 DEG. LIMITED TRANSVERSE EXAM DUE TO PROXIMITY OF NOZZLE INNER RADIUS. ONE AUTSLIC40 INDICATION WAS SIZED WITH AUTSLIC20 AND AUTSLIC35 AND FOUND ALLOWABLE IN ACCORDANCE WITH IWB-3512-1. SEE CNF BGE007. D70187-2/D70389-1ICC-39.
Exam Results 99VE018 Accept
101210 10-205A OUTLET NOZZLE AT 0 DEG. MMITED TRANSVERS EXAM DUE TO THE INTEGRAL EXTENSION.
Exam Results 99VE016 Accept
101220 10-205B OUTLET NOZZLE AT 180 DEG. LIMITED TRANSVERSE EXAM DUE TOTHE
INTEGRAL EXTENSION.
Exam Results 99VE017 Accept
EXAM CATEGORY / ITEM NUMBER: B-E I B4.12
PARTIAL PENETRATION WELDS
Summarv/ID No. Corrvonent ID Comonent Descriotion Comments
101610 CRD NOZZLES CONTROL ROD DRIVE NOZZLES
Exam Results 99BV386 Accept
9 r 1
1. Owner 2. Plant 3. Plant Unit: 4. Owner Certificate of Authorization( If Req.)
5. Commercial Service Date: 6. National Board Number for Unit
tip K- 4
EXAM CATEGORY I ITEM NUMBER: B-E I B4.13
PARTIAL PENETRATION WELDS
Summary/ID No. Component ID Comoonent Descriotion Comments
101620 INSTRUMENT NOZZLES INSTUMENTATION NOZZLES
Exam Results 99BV387 Accept
EXAM CATEGORY I ITEM NUMBER: B-G-1 I B6.180
RCP-21A
SummarvA1D No. Comonent ID Comoonent DescriotIon Comments 162220 21A-S-1-16 RCP-21A'STUDS
Exam Results 99BU01 Accept
.2P-22A
Summarv/ID No. Compnent ID Component Description Comments 162620 22A-S-1-16 RCP-22A STUDS
Exam Results 99BU012 Accept
RCP-22B
SummaryvlD No. CompnetI Comoonent Descriotion Comments 162820 22B-S-1-16 RCP-22B STUDS
Exam Results 99BU013 Accept
REACTOR COOLANT PUMP
SummarvlD No. Component ID Comoonent Descriotion Comments 162420 21B-S-1-16 RCP-21B STUDS
Exam, Results 99BU003 Accept
ATTACHMENT 1 Page 6 of 33
Inservice Inspection Report 3/3/
Baltimore Gas and Electric Company. P.O. Box 1475, Baltimore, MD. 21203
Calvert Cliffs Nuclear Power Plant. 1850 Calvert Cliffs Parkway. Lusby. MD.. 20657-4702
2 WA 04/01/1977 20912
Page 7 of 33ATTACHMENT 1
Inservice Inspection Report 3W3/
1. Owner Baltimore Gas and Electric Company. P.O. Box 1475. Baltimore. MD. 21203
2. Plant: Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusby, MD., 20657-4702
3. Plant Unit: 2
4. Owner Certificate of Authorization( If Req.) NIA
5. Commercial Service Date: 04/01/1977
6. National Board Number for Unit: 20912
EXAM CATEGORY I ITEM NUMBER: B-G-1 1 B6.190
REACTOR COOLANT PUMP
Summarv/ID No. 162425
Exam Results
Component ID RCP-21B
Component Description RCP-21B FLANGE SURFACE
99BVI37 Accept
REACTOR COOLANT PUMPS
Summarv/ID No. 162825
Exam Results
Component ID RCP-22B
Component Descriotion RCP-22B FLANGE SURFACE
99BV138 Accept
'(AM CATEGORY I ITEM NUMBER:
jP-21A
Summary/iD No. Component ID
162230 21A-N-1-16
Exam Results
B-G-1 I B6.200
Component Description RCP-21A NUTS
Comments
99BV349 Accept
EXAM CATEGORY I ITEM NUMBER: B-G-1 I B6.40
RPV THREADS IN FLANGE
Summarvy/D No. Component ID Component Description Comments
101335 54 FLANGE THREADS FLANGE THREADS
Exam Results 99VE028 Accept
EXAM CATEGORY I ITEM NUMBER: B-G-21 B7.50
2.5-SR-2007
Symmarvf1D No. Component ID Comoonent Descriotion Comments
164945 2FB INLET FLANGE BOLTING @ 2-RV-200
Exam Results 99BV391 Accept
2.5-SR-2008
Summarv/ID No. Component ID Component Descorition Comments
"1955 2FB INLET FLANGE BOLTING 0 2-RV-201
,m Results 99BV392 Accept
Comments
Comments
I P-41P -A-K4
Page 8 of 33ATTACHMENT 1
Inservice Inspection Report 3W3/
1. Owner: 2. Plant. 3. Plant Unit: 4. Owner Certificate of Authorization( If Req.)
5. Commercial Service Date: 6 National Board Number for Unit:
Baltimore Gas and Electric Company. P.O. Box 1475, Baltimore, MD. 21203
Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Parkway. Lusby, MD.. 20657-4702
W/A 04/01/1977
20912
EXAM CATEGORY I ITEM NUMBER: B-G-21 B7.60
RCP-21A
Summary/ID No. Component ID Comvonent Descriotion Comments
162250 21A-C-1-16 RCP-21A SEAL BOLTING
Exam Results 99BV348 Accept
ATTACHMENT 1 Page 9 of 33
Inservice Inspection Report 3//2
1. Owner. Baltimore Gas and Electric Company. P.O. Box 1475, Baltimore. MD. 21203
2. Plant: Calvert Cliffs Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusbv, MD., 20657-4702
3. Plant Unit: 2
4. Owner Certificate of Authorization( If Req.) N/A
5. Commercial Service Date: 041011!77
6. National Board Number for Unit: 20912
EXAM CATEGORY I ITEM NUMBER: B-J I B9.11
30-RC-21A
Summary/ID No. Component ID Component Description Comments
109440 12 ELBOW TO TRANSITION PIECE UT WAS PERFORMED IN UEU OF MT AS ALLOWED BY NRC RELIEF REQUEST.
Exam Results 99VE045 Accept
109450 13 TRANSITION PIECE TO NOZZL UT WAS PERFORMED IN LIEU OF MT AS ALLOWED BY NRC RELIEF REQUEST.
Exam Results 99VE046 Accept
30-RC-21B
-nmarv/ID No. Component ID Component Descrition Comments
3430 12 ELBOW TO TRANSITION PIECE UT WAS PERFORMED IN LIEU OF MT AS ALLOWED BY NRC RELIEF REQUEST.
Exam Results 99VE049 Accept
110440 13 TRANSITION PIECE TO NOZZL UT WAS PERFORMED IN LIEU OF MT AS ALLOWED BY NRC REUEF REQUEST.
&MM _Results 99VE050 Accept
30-RC-22A
SummrD No. mone ID Component Descriotion Comments
111420 12 ELBOW TO TRANSITION PIECE UT WAS PERFORMED IN LIEU OF MT AS ALLOWED BY NRC RELIEF REQUEST.
Exam Results 99VE053 Accept
111430 13 TRANSITION PIECE TO NOZZL UT PERFORMED IN MEU OF MT AS ALLOWED BY
NRC RELIEF REQUEST.
Exam Results 99VE054 Accept
30-RC-22B
Summary/D No. Cgoggl-o!-tJI Component Description Comments
112430 12 ELBOW TO TRANSITION PIECE UT PERFORMED IN MEU OF MT AS ALLOWED BY NRC RELIEF REQUEST.
m Results 99VE059 Accept
112440 13 TRANSITION PIECE TO NOZZL UT EXAM PERFORMED IN LIEU OF MT
ATTACHMENT 1 Page 10 of 33
Inservice Inspection Report 3/3/2
1. Owner. Baltimore G 2. Plant: Calvert Cliff,
3. Plant Unit: 2 4. Owner Certificate of Authorization( If Req.) N/A
5. Commercial Service Date: 04/01/1977 6. National Board Number for Unit: 20912
as and Electric Company. P.O. Box 1475, Baltimore, MD. 21203 Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusby. MD., 20657-4702
99VE060 Accept
42-RC-21
Summarv/iD No. Component ID Component DescriDtion Comments
107020 2 TRANSITION PIECE TO PIPE UT WAS PERFORMED IN UEU OF MT AS ALLOWED BY NRC REUEF REQUEST.
Exam Results 99VE036 Accept
42-RC-22
Summary/iD No. Comroonent ID Component Description Comnments
108010 1 NOZZLE TO TRANSITION PIECE UT EXAM PERFORMED IN UEU OF MT
Exam Results 99VE039 Accept
1020 2 TRANSITION PIECE TO PIPE UT WAS PERFORMED IN MEU OF MT AS ALLOWED BY NRC REUEF REQUEST.
Exam Results 99VE040 Accept
REACTOR COOLANT - 42-RC-21
mnmarv/ID No, Component ID Component Description Comments
107010 1 NOZZLE TO TRANSITION PIECE UT EXAM PERFORMED IN MEU OF MT
Exam Results 99VE035 Accept
SAFETY INJECTION
Summary/ID No. Component ID Comoonent Description Comments
116130 7 PIPE TO VALVE 2-SI-227 Examination requested by Mechanical Design.
Exam Results 99BU038 Accept
118060 7 PIPE TO VALVE 2-SI-247 Examination requested by Mechanical Design.
Exam Results 99BU028 Accept
SAFETY INJECTION SYSTEM
Summarv/D No. Component ID Component Descrition Comments 116140 8 VALVE 2-SI-227 TO ELBOW Examination requested by Mechanical Design.
-'-m Results 99BU027 Accept
VALVE 2-SI-247 TO ELBOW Examination requested by Mechanical Design.
99BU029 Accept
118070
Exam Results
8
Page 11 of 33ATTACHMENT I
Inservice Inspection Report 3/3/2
1. Owner: 2. Plant 3. Plant Unit:
4. Owner Certificate of Authorization( If Req.)
5. Commercial Service Date:
6. National Board Number for Unit:
Baltimore Gas and Electric Company, P.O. Box 1475, Baltimore, MD. 21203
Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Parkway. Lusby. MD.. 20657-4702
WA 04/01/1977 20912
V1W \+&� \�A 9 � � �&Q. �lLAkc�
[A10 -Ak
Page 12 of 33ATTACHMENT 1
Inservice Inspection Report 3032
1. Owner. Baltimore GN
2. Plant: Calvert ClifO
3. Plant Unit: 2 4. Owner Certificate of Authorization( If Req.) N/A
5. Commercial Service Date: 04/01/1977
6. National Board Number for Unit: 20912
as and Electric Comoany, P.O. Box 1475, Baltimore, MD. 21203
Nuclear Power Plant. 1650 Calvert Cliffs Parkway, Lusby. MD.. 20657-4702
EXAM CATEGORY I ITEM NUMBER: B-J I B9.12
$0-RC-21A
Summary/ID No. Component ID Component Descridtion Comments
109420 12LU-1 LONGITUDINAL SEAM UT WAS PERFORMED IN LIEU OF MT AS ALLOWED BY NRC RELIEF REQUEST.
Exam Results 99VE043 Accept
109430 12LU-2 LONGITUDINAL SEAM UT WAS PERFORMED IN UEU OF MT AS ALLOWED BY NRC RELIEF REQUEST.
Exam Results 99VE044 Accept
30-RC-21B
nmarv!lD No. component ID Component Description Comments
J410 12LU-1 LONGITUDINAL SEAM UT WAS PERFORMED IN UEU OF MT AS ALLOWED BY NRC RELIEF REQUEST.
Exam Results 99VE047 Accept
110420 12LU-2 LONGITUDINAL SEAM UT WAS PERFORMED IN UEU OF MT AS ALLOWED BY NRC REUEF REQUEST.
Exam Results 99VE048 Accept
30-RC-22A
Summarv/ID No. Component ID Component Descriotion Comments
111400 12LU-1 LONGITUDINAL SEAM UT WAS PERFORMED IN UEU OF MT AS ALLOWED BY NRC REUEF REQUEST.
Exam Results 99VE051 Accept
111410 12LU-2 LONGITUDINAL SEAM UT WAS PERFORMED IN UEU OF MT AS ALLOWED BY NRC RELIEF REQUEST.
Exam Results 99VE052 Accept
30-RC-22B
Summary/ID No. Component ID Comoonent Descriotion Comments
112410 12LU-1 LONGITUDINAL SEAM UT PERFORMED IN UEU OF MT AS ALLOWED BY NRC REUEF REQUEST.
m Results 99VE055 Accept
I AF-e t A-
Page 13 of 33
4
am1. Owner: Baltimore G
2. Plant: Calvert CIO
3. Plant Unit: 2
4. Owner Certificate of Authorization( If Req.) N/A
5. Commercial Service Date: 04/01/1977
6. National Board Number for Unit: 20912
as and Electric Company. P.O. Box 1475. Baltimore, MD. 21203
Nuclear Power Plant, 1650 Calvert Cliffs Parkway. Lusby, MD., 20657-4702
112420 12LU-2 LONGITUDINAL SEAM UT PERFORMED IN LIEU OF MT AS ALLOWED BY
NRC RELIEF REQUEST.
Exam Results - 8 99VE056 Accept
42-RC-21
Summarv/1D No. Component ID Comoonent Descrdotlon Comments 107030 2LD-1 LONGITUDINAL SEAM UT WAS PERFORMED IN MEU OF MT AS ALLOWED
BY NRC RELIEF REQUEST.
Exam Results 99VE037 Accept
107040 2LD-2 LONGITUDINAL SEAM UT WAS PERFORMED IN MEU OF MT AS ALLOWED BY NRC REUEF REQUEST.
Exam Results 99VE038 Accept
42-RC-22
Summary/ID No. Component ID Component Description Comments 108030 2LD-1 LONGITUDINAL SEAM UTWAS PERFORMED IN UEU OF MT AS ALLOWED
BY NRC RELIEF REQUEST. Exam Results
99VE041 Accept
108040 2LD-2 LONGITUDINAL SEAM UT WAS PERFORMED IN UEU OF MT AS ALLOWED BY NRC REUEF REQUEST.
Exam Results 99VE042 Accept
REACTOR COOLANT SYSTEM - 30-RC-21B
SumraryID No. Component ID Comoonent Descriotion Comments
110330 1OLD-2 LONGITUDINAL SEAM
Exam Results 99BU019 Accept
99BM022 Accept
ATTACHMENT 1
Inservice Inspection Report 3W3/
ae4 . Page 14 of 33ATTACHMENT I
Inservice Inspection Report 3=3/2
1. Owner. 2. Plant: 3. Plant Unit:
4. Owner Certificate of Authorization( If Req.)
5. Commercial Service Date:
6. National Board Number for Unit:
Baltimore Gas and Electric Company, P.O. Box 1475. Baltimore. MD. 21203
Calvert Cliffs Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusbv. MD., 20657-4702
N/A 04/01/1977
20912
EXAM CATEGORY I ITEM NUMBER: B-J I B9.21
2-CV-201B
SummaryfID No. Component ID Component Description Comments
155220 18 PIPE TO PIPE
Exam Results 99BP021 Accept
2-.LD-2004
SummaryllD No. Component ID Component Description Comments
161320 14 TEE TO PIPE
Exam Results 99BP171 Accept
DS-2002
.~immarv/ID No. Component ID Component Description Comments
138080 7 ELBOW TO PIPE
Exam Results 99BP012 Accept
EXAM CATEGORY I ITEM NUMBER: B-L-1 1612.10
RCP-21B
Summarv/ID No. Component ID Comoonent Descdrtion Comments
162400 21B RCP-21B PUMP CASING WELDS
Exam Results 99BP037 Accept
99BV114 Reject
Evaluation Disposition: Acceptable
RCP-22A
Summary/vD No. Comoonent ID Component Descriotion Comments
162600 22A RCP-22A PUMP CASING WELDS
Exam Results 99BP013 Accept
99BV013 Accept
RCP-22B
Summarv/iD No. Component ID Component Description Comments
2800 22B RCP-22B PUMP CASING WELDS
im Results 99BV012 Accept
99BP011 Accept
4
sac
1. Owner: 2. Plant
3. Plant Unit:
4. Owner Certificate of Authorization( If Req.) 5. Commercial Service Date: 6. National Board Number for Unit:
Baltimore Gas and Electric Company. P.O. Box 1475, Baltimore, MD. 21203 Calvert Cliffs Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusby. MD.. 20657-4702
NIA
04/0111977
20912
EXAM CATEGORY I ITEM NUMBER: B-L-2 / B12.20 REACTOR COOLANT PUMPS
Summary/ID No. Component ID Component Description Comments 162810 RCP-22B PUMP CASING INTERNAL SURFACE Exam Results
99BV388 Accept
EXAM CATEGORY I ITEM NUMBER: B-N-1 1 B13.10 INTERIOR SURFACES AND CORE SUPPORT STRUCTURES
Summary/ID No. Component ID Cormoonent Description Comments 101340 VESSEL INTERIOR VESSEL INTERIOR Exam Results
99VE061 Accept
_XAM CATEGORY I ITEM NUMBER: B-N-21 B13.50 INTERIOR SURFACES AND CORE SUPPORT STRUCTURES
Summarv/1D No. C nent ID Component Description Comments 101345 INTERIOR ATTACHMENTS WITHIN BELTUNE REGION Exam Results
99VE030 Accept
EXAM CATEGORY I ITEM NUMBER: B-N-21 /13.60 INTERIOR SURFACES AND CORE SUPPORT STRUCTURES
Summary/ID No. Component ID Cormonent Description Comments 101350 INTERIOR ATTACHMENTS BEYOND BELTUNE REGION Exam Results
99VE031 Accept
EXAM CATEGORY I ITEM NUMBER: B-N-3 / B13.70 INTERIOR SURFACES AND CORE SUPPORT STRUCTURES
SummarIyD No. Component ID Comoonent Description Comments 101360 CORE SUPPORT STRUCT CORE SUPPORT STRUCTURE
Exam Results 99VE032 Accept
Page 15 of 33ATTACHMENT 1
Inservice Inspection Report 3/3W2
ATTACHMENT I Page 16 of 33
Inservice Inspection Report 3/3/2
1. Owner Baltimore G 2. Plant: CaBKert CliffO
3. Plant Unit: 2 4. Owner Certificate of Authorization( If Req.) NWA
5. Commercial Service Date: 04/01/1977
as and Electric Comnany. P.O. Box 1475, Baltimore, MD. 21203 Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusby, MD.. 20657-4702
6. I4t1UUlUJ D ;oui ru IIglmJrr il fILl. ___i_
EXAM CATEGORY I ITEM NUMBER: B-O I B14.10
CRD- REACTOR PRESSURE VESSEL
SummarvlID No. Component ID Comoonent Description Comments 102180 CRD HOUSINGS PEREPHERAL CRD HOUSING EXAMINED CRDs IN ACCORDANCE WITH ISI
RELIEF REQUEST #3. IExam Results
99BP022 Accept
EXAM CATEGORY I ITEM NUMBER: B-P/IB15.11
REACTOR VESSEL PRESSURE RETAINING BOUNDARY
Summarv!ID No. Component ID Component Descriotion Comments 165010 RV-HT-1 HYDROSTATIC TEST
Fxam Results 99BV339 Accept
EXAM CATEGORY I ITEM NUMBER: B-P I B15.31
STEAM GENERATOR PRESSURE RETAINING BOUNDARY
Summarv/ID No. Component ID Component Description Comments 165050 SG-HT-1 HYDROSTATIC TEST
Exam Results 99BV343 Accept
EXAM CATEGORY I ITEM NUMBER: B-P I B15.41
HEAT EXCHANGER PRESSURE RETAINING BOUNDARY
Summarv/ID No. Component ID Component Descriotion Comments
165070 HX-HT-1 HYDROSTATIC TEST
Exam Results 99BV344 Accept
EXAM CATEGORY I ITEM NUMBER: B-P I B15.51
PIPING PRESSURE RETAINING BOUNDARY
Summarv/ID No. Component ID Component Descripton Comments 165090 PP-HT-1 HYDROSTATIC TEST
Exam Results 99BV345 Accept
[ 7' 1
0-4A 7C w
.Aý
1. Owner. 2. Plant: 3. Plant Unit: 4. Owner Certificate of Authorization( If Req.)
5. Commercial Service Date: 6. National Board Number for Unit:
NIA 04/01/1977
20912
EXAM CATEGORY I ITEM NUMBER: B-P I B15.61
PUMP PRESSURE RETAINING BOUNDARY
Summarv/lD No. Component ID Component Description Comments 165110 PMP-HT-1 HYDROSTATIC TEST
Exam Results 99BV346 Accept
EXAM CATEGORY I ITEM NUMBER: B-P I B15.71
PRESSURE RETAINING BOUNDARY
SummarvID No. Comoonent ID Component Descridton Comments 165130 VLV-HT-1 HYDROSTATIC TEST
Exam Results 99BV347 Accept
..XAM CATEGORY I ITEM NUMBER: C-A I C1.10
REGENERATIVE HEAT EXCHANGER
Summarv/ID No. Component ID Component Description Comments 202800 RHE-16 TEE TO SHELL COVERAGE UMITED DUE TO CONFIGURATION.
Exam Results 99BU041 Accept
EXAM CATEGORY I ITEM NUMBER: C-A I Cl.20
REGENERATIVE HEAT EXCHANGER
mmrnvarID No. Component ID Comoonent Description Comments 202750 RHE-15 TEE TO CAP END CAP WELD MMITED DUE TO CONFIGURATION.
Exam Results 99BU040 Accept
EXAM CATEGORY I ITEM NUMBER: C-AI Cl.30
REGENERATIVE HEAT EXCHANGER
Summarv/ID No. Component ID Comoonent Description Comments 203200 RHE-23 TUBE SHEET TO REDUCER COVERAGE UMITED DUE TO REDUCER
CONFIGURATION ON DOWNSTREAM SIDE.
Exam Results 99BU039 Accept
ATTACHMENT 1 Page 17of 33
Inservice Inspection Report 3W/2
Baltimore Gas and Electric Companv, P.O. Box 1475, Baltimore, MD. 21203
Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusby, MD.. 20657-4702
Page 18 of 33ATTACHMENT I
Inservice Inspection Report 3/3/
1. Owner. Baltimore Gi
2. Plant: Calvert Cliffs
3. Plant Unit: 2
4. Owner Certificate of Authorization( If Req.) NIA
5. Commercial Service Date: 04/01/1977
6. National Board Number for Unit: .201
as and Electric Company. P.O. Box 1475. Baltimore, MD. 21203
Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusby. MD.. 20657-4702
EXAM CATEGORY I ITEM NUMBER: C-C I C3.20
14-SC-2003
Summary/ID No. Comoonent ID Comoonent Description Comments 272950 R-6X INTEGRAL ATTACHMENT Umited exam due to configuration and interference.
Exam Results 99BP207 Accept
16-FW-2018
Sumrnmary/ID No. Component ID Compionent Description Comments 291700 H-1 INTEGRAL ATTACHMENT UT WAS PERFORMED TO SUPPLEMENT SURFACE
EXAM FOR COVERAGE.
Exam Results 99BM015 Accept
JN STEAM SYSTEM
SummarvID No, Component ID Component Descriotion Comments 287750 H-8 INTEGRALLY WELDED ATTACHMENT
Exam Results 99BU015 Accept
288750 H-5 INTEGRALLY WELDED ATTACHMENT Limited due to configuration.
Exam Results 99BU016 Accept
SAFETY INJECTION SYSTEM
Summary/ID No. Component ID Component Description Comments 216250 R-18 INTEGRALLY WELDED ATTACHM
Exam Results 99BU053 Accept
216450 R-14 INTEGRALLY WELDED ATTACHM ULmited due to pipe clamp configuration.
Exam Results 99BU054 Accept
217250 R-19 INTEGRALLY WELDED ATTACHM UT was performed to supplement surface exam.
Exam Results 99BU061 Accept
223400 H-18 INTEGRALLY WELDED ATTACHM UT to supplement surface exam.
-in Results 99BU059 Accept
INTEGRALLY WELDED ATTACHM UT to supplement surface exam.
99BU064 Accept
231000
Exam Results
H-3
& -4 T -I
I jP AAAL A
0
am
1. Owner. Balti 2. Plant CaN 3. Plant Unit: 2 4. Owner Certificate of Authorization( If Req.) N/A5. Commercial Service Date:
6. National Board Number for Unit:
more Gas and Electric Company, P.O. Box 1475. Baltimore, MD. 21203 ert Cliffs Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusby, MD.. 20657-4702
04/01/1977 20912
99BU065 Accept
237125 H-6 INTEGRALLY WELDED ATTACHM Exam Results
99BU052 Accept
239625 H-13 INTEGRALLY WELDED ATTACHM UT WAS PERFORMED TO SUPPLEMENT PT TO
ATTEMPT TO ACHIEVE GREATER COVERAGE. Exam Results
99BU051 Accept
245375 H-12, R-10 INTEGRALLY WELDED ATrACHM Exam Results
99BU057 Accept
"046025 H-9, R-7 INTEGRALLY WELDED ATTACHM
im Results 99BU060 Accept
246575 H-l, R-1 INTEGRALLY WELDED ATTACHM Exam Results
99BU056 Accept
EXAM CATEGORY I ITEM NUMBER: C-F-1 / C5.30 2-SI-2035
Summarv/IQ No. Component ID Component Description Comment 256300 3 ELBOW TO PIPE Exam Results
99BP206 Accept
256250 2 PIPE TO ELBOW Exam Results
99BP205 Accept
EXAM CATEGORY I ITEM NUMBER: PRESSURE RETAINING BOUNDARY
Summar/iD No. 293950
Exam Results
Component ID PV-SLT-1
C-HIC7.10
Comoonent Descriotion SYSTEM LEAKAGE TEST
99BV351 Accept
Page 19 of 33ATTACHMENT 1
Inservice Inspection Report 3M3/2
ae Page 20 of 33ATTACHMENT 1
Inservice, Inspection Report
1. Owner. 2. Plant: 3. Plant Unit: 4. Owner Certificate of Authorization( If Req.) 5. Commercial Service Date: 6. National Board Number for Unit
Baltimore Gas and Electric Comrpany, P.O. Box 1475, Baltimore, MD. 21203
Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusby. MD.. 20657-4702
04/01/1977 20912
EXAM CATEGORY I ITEM NUMBER: C-H I C7.30
PRESSURE RETAINING BOUNDARY
Summary/ID No. Comoonent ID Cowmonent Descfttion Comments 294050 PP-SLT-1 SYSTEM LEAKAGE TEST
Exam Results 99BV352 Accept
EXAM CATEGORY I ITEM NUMBER: C-H I C7.50
PRESSURE RETAINING BOUNDARY
Summarv/ID No. Comronent ID Comoonent DescriJion Comments 294150 PMP-SLT-1 SYSTEMWLEAKAGE TEST
Exam Results 99BV353 Accept
.XAM CATEGORY I ITEM NUMBER: C-H I C7.70
PRESSURE RETAINING BOUNDARY
SummarvAID No. Component ID Component Description Comments 294250 VLV-SLT-1 SYSTEM LEAKAGE TEST
Exam Results 99BV354 Accept
Page 21 of 33ATTACHMENT 1
Inservice Inspection Report 3/3/2
1. Owner
2. Plant:
3. Plant Unit:
4. Owner Certificate of Authorization( If Req.)
5. Commercial Service Date:
6. National Board Number for Unit:
Baltimore Gas and Electric Company. P.O. Box 1475, Baltimore, MD. 21203
Calvert Cliffs Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusby. MD.. 20657-4702
04/0111977 20912
EXAM CATEGORY I ITEM NUMBER: E-A I E1.12
CONTAINMENT INTERIOR SURFACE
Summary/ID No. Component ID Comonent Descriotion Comments B10800 B10800 INTERIOR UNER COATING WAS RE-EXAMINED AFTER COATING
REPAIR AND FOUND ACCEPTABLE.
Exam Results 99BV215 Reject
99BV255 Accept
B11700 B11700 INTERIOR UNER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
Exam Results 99BV233 Reject
99BV222 Accept
B12000 B12000 INTERIOR MNER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
Exam Results 99BV234 Reject 99BV223 Accept
B12100 B12100 INTERIOR LINER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
Exam Results 99BV224 Accept
99BV235 Reject
612300 512300 INTERIOR UNER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
Exam Results 99BV225 Accept
99BV236 Reject
INTERIOR UNER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
.00 B12600
I Exam Results
& -4
W JP 7C. .A-
ATTACHMENT I
Inservice Inspection Report 3i3/2
1. Owner: Baltimore G 2. Plant Calvert Clitf 3. Plant Unit: 2 4. Owner Certificate of Authorization( If Req.) N/A 5. Commercial Service Date: 04101/1977 6. National Board Number for Unit: 20912
as and Electric Compyany. P.O. Box 1475. Baltimore, MD. 21203
s Nuclear Power Plant, 1650 Calvert Cliffs Parkway. Lusby. MD., 20657-4702
99BV237 Reject 99BV226 Accept
B12700 B12700 INTERIOR LINER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
Exam Results 99BV238 Reject
99BV227 Accept
B13300 813300 INTERIOR MNER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
im Results 99BV239 Reject 99BV228 Accept
B13400 B13400 INTERIOR UNER AREA WAS REEXAMINED AND FOUND
ACCEPTABLE AFTER COATING REPAIR. Exam Results
99BV240 Reject 99BV288 Accept
B13500 B13500 INTERIOR UNER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
Exam Results 99BV229 Accept 99BV241 Reject
B13600 B13600 INTERIOR MNER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
Exam Results 99BV221 Accept 99BV242 Reject
Q13800 B13800 INTERIOR LINER AREA WAS REEXAMINED AND FOUND
ACCEPTABLE AFTER COATING REPAIR. .am Results
99BV297 Accept 99BV243 Reject
Page 22 of 33
Page 23 of 33ATTACHMENT 1
Inservice Inspection Report 3W3/
1. Owner Battimore G•
2. Plant: Calvert Cliff
3. Plant Unit: 2 4. Owner Certificate of Authorization( If Req.) N/A
5. Commercial Service Date: 04/01/1977
6. National Board Number for Unit: 20912
as and Electric Company. P.O. Box 1475. Baltimore, MD. 21203
Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusby. MD.. 20657-4702
B14700 B14700 INTERIOR LINER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
Exam Results 99BV230 Accept
99BV244 Reject
B16400 B16400 INTERIOR LINER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
Exam Results 99BV231 Accept
99BV245 Reject
INTERIOR LINER EXAMINATION PERFORMED ON AREAS OF FAILED COATINGS DURING THE GENERAL VISUAL WALKDOWN FOR CONTAINMENT. AREAS WERE REPAIRED AND ACCEPTED. NO FURTHER ACTION REQUIRED.
Exam Results 99BV232 Accept
99BV246 Reject
817600 B17600 INTERIOR LINER AREA WAS REEXAMINED AND FOUND ACCEPTABLE AFTER COATING REPAIR.
Exam Results 99BV247 Reject
99BV289 Accept
B18200 B18200 INTERIOR UNER AREA WAS REEXAMINED AND FOUND ACCEPTABLE AFTER COATING REPAIR.
Exam Results 99BV248 Reject
99BV290 Accept
818500 B18500 INTERIOR UNER AREA WAS REEXAMINED AND FOUND
ACCEPTABLE AFTER COATING REPAIR.
Exam Results 99BV249 Reject
99BV291 Accept
m600 818600 INTERIOR UNER AREA WAS REEXAMINED AND FOUND
ACCEPTABLE AFTER COATING REPAIR.
rxam Results 99BV292 Accept
99BV250 Reject
B16800
L IP-4
ATFACHMENT I
Inservice Inspection Report 3P3/2
1. Owner. Baltimore G 2. Plant: Calvert Cliff,
3. Plant Unit: 2 4. Owner Certificate of Authorization( If Req.) NIA 5. Commercial Service Date: 04/01/1977 6. National Board Number for Unit: 20912
as and Electric Company, P.O. Box 1475, Baltimore, MD. 21203
s Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusby, MD.. 20657-4702
B19000 B19000 INTERIOR LINER AREA WAS REEXAMINED AND FOUND ACCEPTABLE AFTER COATING REPAIR.
Exam Results 99BV294 Accept 99BV252 Reject
B19300 B19300 INTERIOR LINER AREA WAS REEXAMINED AND FOUND
ACCEPTABLE AFTER COATING REPAIR. Exam Results
99BV295 Accept
99BV253 Reject
B19400 B19400 INTERIOR UNER AREA WAS REEXAMINED AND FOUND
ACCEPTABLE AFTER COATING REPAIR. Exam Results
99BV296 Accept
99BV254 Reject
CONTAINMENT SURFACE
Summarv/ID No. Comoonent ID Component Descriotion Comments B10105 LC-4 TO LC-5 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED
UNDER IR3-022-533. Exam Results
99BV151 Accept 99BV015 Reject
Evaluation Disposition: Acceptable
B10110 LC-5 TO LC-6 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV016 Reject 99BV152 Accept
CONTAINMENT SURFACES
SumrntaAD No. Component ID Component Descriotion Commnts 510115 LC-6 TO LC-7 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED
UNDER IR3-022-533. CONDmON WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES1 99900382.
Exam Results 99BV017 Reject 99BV153 Accept
Page 24 of 33
ATTACHMENT 1
Inservice Inspection Report 3W3/
1. Owner Baltimore G 2. Plant: Calvert Cliff
3. Plant Unit: 2 4. Owner Certificate of Authorization( If Req.) NIA 5. Commercial Service Date: 04/01/1977 6. National Board Number for Unit: 20912
as and Electric Company. P.O. Box 1475. Baltimore, MD. 21203
s Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusby, MD., 20657-4702
B10120 LC-7 TO LC-8 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV018 Reject
99BV154 Accept
B10125 LC-8 TO LC-9 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV019 Reject
99BV155 Accept
"10130 LC-9 TO LC-10 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533 AND IR3-022-546. CONDmON WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV020 Reject
99BV156 Accept
B10135 LC-10 TO LC-l1 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV021 Reject
99BV158 Accept
B10140 LC-1I TO LC-12 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDmON WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV159 Accept
99BV022 Reject
B10145 LC-12 TO LC-13 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV160 Accept
990V023 Reject
Page 25 of 33
ATTACHMENT 1
Inservice Inspection Report 3/W2
1. Owner:
2. Plant
3. Plant Unit:
Baltimore Gas and Electric Comoany. P.O. Box 1475. Baltimore. MD. 21203 Calvert Cliffs Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusby. MD.. 20657-4702
24. Owner Certificate of Authorization( If Req.) W/A
5. Commercial Service Date: 04/01/1977 6. National Board Number for Unit: 20912
B10150 LC-13 TO LC-14 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533 AND IR3-022-546. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV024 Reject 99BV161 Accept
B10155 LC-14 TO LC-15 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV025 Reject 99BV162 Accept
"10205 LC-15 TO LC-16 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV163 Accept 99BV026 Reject
810210 LC-16 TO LC-17 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED
UNDER 1R3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV164 Accept 99BV027 Reject
B10215 LC-17 TO LC-18 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDmON WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV028 Reject 99BV166 Accept
B10220 LC-18 TO LC-19 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV029 Reject
99BV167 Accept
Page 26 of 33
Page 27 of 33ATTACHMENT 1
Inservice Inspection Report 3/3/2
1. Owner:
2. Plant:
3. Plant Unit:
4. Owner Certificate of Authorization( If Req.)
5. Commercial Service Date:
6. National Board Number for Unit-
Baltimore Gas and Electric Company. P.O. Box 1475. Baltimore, MD. 21203
Calvert Cliffs Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusby. MD.. 20657-4702
2 WA 041011197
20912
B10225 LC-19 TO LC-20 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV030 Reject
99BV168 Accept
B10230 LC-20 TO LC-21 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV170 Accept
99BV031 Reject
"10235 LC-21 TO LC-22 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV173 Accept
99BV032 Reject
B10240 LC-22 TO LC-23 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV033 Reject
99BV174 Accept
B10245 .C-23 TO LC-24 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV176 Accept
99BV034 Reject
B10250 LC-24 TO LC-25 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV179 Accept
99BV035 Reject
JPA_ý&P-4 .... 1 -'4
1. Owner. Baltimore G 2. Plant Calvert Clifi 3. Plant Unit- 2 4. Owner Certificate of Authorization( If Req.) N/A 5. Commercial Service Date: 0401/1 977 6. National Board Number for Unit: 20912
as and Electric Company. P.O. Box 1475. Baltimore. MD. 21203 3 Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusby, MD., 20657-4702
B10255 LC-25 TO LC-26 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV182 Accept 99BV036 Reject
B10260 LC-26 TO LC-27 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV037 Reject 99BV185 Accept
"10265 LC-27 TO LC-28 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDmON WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV038 Reject 99BV187 Accept
810270 LC-28 TO LC-29 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES1 99900382.
Exam Results 99BV188 Accept
99BV039 Reject
B10305 LC-29 TO LC-30 LEAK CHASE CHANNEL AREA WAS ACCEPTED AS-IS BY DESIGN ENGINEERING VIA ES199900382. CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533.
Exam Results 99BV189 Accept 99BV061 Reject
B10310 LC-30 TO LC-31 LEAK CHASE CHANNEL AREA WAS ACCEPTED AS-IS BY DESIGN ENGINEERING VIA ES199900382. CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533.
Exam Results 99BV040 Reject 99BV190 Accept
LC-31 TO LC-32 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Page 28 of 33
- 1315
Exam Results
ATTACHMENT 1
Inservice Inspection Report 3W2
Page 29 of 33ATTACHMENT 1
Inservice Inspection Report 3/W2
1. Owner Baltimore G
2. Plant Calvert Cliff,
3. Plant Unit: 2
4. Owner Certificate of Authorization( If Req.) WA
5. Commercial Service Date: 04/01/1977 6. National Board Number for Unit: 20912
as and Electric Company. P.O. Box 1475, Baltimore, MD. 21203
s Nuclear Power Plant. 1650 Calvert Cliffs Parkway, Lusby, MD., 20657-4702
99BV041 Reject
99BV191 Accept
B10320 LC-32 TO LC-33 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV042 Reject
99BV192 Accept
B10325 LC-33 TO LC-34 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV193 Accept
99BV043 Reject
B10330 LC-34 TO LC-35 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533 AND IR3-022-546. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV196 Accept
99BV044 Reject
B10335 LC-35 TO LC-36 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV045 Reject
99BV197 Accept
B10340 LC-36 TO LC-37 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV046 Reject
99BV198 Accept
B10345 LC-37 TO LC-38 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
xam Results 99BV047 Reject
99BV199 Accept
W -4r
J0
Page 30 of 33ATTACHMENT 1
Inservice Inspection Report 3/W2
1. Owner. Baltimore Gi
2. Plant Calvert Cliff,
3. Plant Unit 2
4. Owner Certificate of Authorization( If Req.) NIA
5. Commercial Service Date: 04/01/1977
6. National Board Number for Unit: 20912
as and Electric Company. P.O. Box 1475. Baltimore, MD. 21203
s Nuclear Power Plant. 1650 Calvert Cliffs Parkway, Lusby, MD.. 20657-4702
B10350 LC-38 TO LC-39 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES1 99900382.
Exam Results 99BV200 Accept 99BV048 Reject
B10355 LC-39 TO LC-40 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV201 Accept
99BV049 Reject
"10360 LC-40 TO LC-41 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV202 Accept 99BV050 Reject
B10405 LC-41 TO LC-42 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV203 Accept 99BV051 Reject
B10410 LC-42 TO LC-43 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER 1R3-022-533. CONDION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV052 Reject
99BV204 Accept
B10415 LC-43 TO LC-44 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV053 Reject
99BV205 Accept
A C;ý
1. Owner.
2. Plant:
Page 31 of 33
Baltimore Gas and Electric Company. P.O. Box 1475, Baltimore. MD. 21203 Calvert Cliffs Nuclear Power Plant. 1650 Calvert Cliffs Parkway. Lusbv, MD., 20657-4702
3. Plant Unit: 2 4. Owner Certificate of Authorization( If Req.) N/A 5. Commercial Service Date: 04/01/1977 6. National Board Number for Unit: 20912
B10420 LC-44 TO LC-45 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV054 Reject 99BV206 Accept
B10425 LC-45 TO LC-46 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES1 99900382.
Exam Results 99BV062 Reject 99BV207 Accept
"110430 LC-46 TO LC-47 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV208 Accept 99BV055 Reject
B10435 LC-47 TO LC-48 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV056 Reject 99BV209 Accept
B10440 LC-48 TO LC-1 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results
99BV057 Reject 99BV210 Accept
B10445 LC-1 TO LC-2 LEAK CHASE CHANNEL ARFA WAS A"A•EPFrn A. IQ Cv nlZIfMENGINEERING VIA ES199900382. CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533.
Exam Results99BV058 99BV211
Reject
Accept
LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
J450 LC-2 TO LC-3
'Exam Results
ATTACHMENT 1
Inservice Inspection Report 3W3/
Page 32 of 33
1. Owner. Baltimore G
2. Plant: Calvert Cliff
3. Plant Unit: 2 4. Owner Certificate of Authorization( If Req.) NA
5. Commercial Service Date: 04/01/1977
6. National Board Number for Unit: 20912
as and Electric Company, P.O. Box 1475, Baltimore, MD. 21203
s Nuclear Power Plant, 1650 Calvert Cliffs Parkway, Lusby, MD.. 20657-4702
99BV059 Reject
99BV212 Accept
B10455 LC-3 TO LC-4 LEAK CHASE CHANNEL CORRECTIVE ACTIONS ARE BEING TRACKED UNDER IR3-022-533. CONDITION WAS FOUND ACCEPTABLE AS-IS BY DESIGN ENGINEERING. REF ES199900382.
Exam Results 99BV060 Reject
99BV213 Accept
CONTINMENT INTERIOR SURFACE
SummerviD No. Co'myonent ID Copnponent Description Comments
B18800 B18800 INTERIOR UNER AREA WAS REEXAMINED AND FOUND ACCEPTABLE AFTER COATING REPAIR.
"-am Results 99BV293 Accept 99BV251 Reject
EXAM CATEGORY I ITEM NUMBER: E-D I E5.30
CONTAINMENT MOISTURE BARRIER
Summary/ID No. Comoonent ID Component Descrption Comments
B10005 MB-1 MOISTURE BARRIER PRESERVICE EXAMINATION OF NEW MOISTURE BARRIER IS ACCEPTABLE UNDER NDE REPORT 99BV150. CORRECTIVE ACTIONS BEING TRACKED UNDER IR3-022-533.
Exam Results 99BV150 Accept
99BV113 Reject Evaluation Disposition: Acceptable
EXAM CATEGORY I ITEM NUMBER: E-G I E8.10
Containment
Summary/ID No. Component ID Comoonent Description Comments
B10920 Penetration 13 Blind Range Bolting
Exam Results 99BV325 Accept
B11545 Penetration 14 Blind Flange Bolting
Exam Results 99BV326 Accept
ATTACHMENT I
Inservice Inspection Report 3/3/2
Page 33 of 33ATTACHMENT 1
Inservice Inspection Report 3W3/
1. Owner. 2. Plant: 3. Plant Unit: 4. Owner Certificate of Authorization( If Req.)
5. Commercial Service Date:
6. National Board Number for Unit:
EXAM CATEGORY I ITEM NUMBER:
REACTOR COOLANT PUMPS
Summarv/ID No. 162840
Exam Results
Baltimore Gas and Electric Company, P.O. Box 1475, Baltimore, MD. 21203
Calvert Cliffs Nuclear Power Plant, 1650 Calvert Cliffs Parkway. Lusby, MD.. 20657-4702
2 WA 04101/1977
2=2
N/A I -
Comoonent ID Comoonent Descriotion PUMP MOTOR FLYWHEEL FLYWHEEL #3S-77P108
99BU047 99BU046 99BU048 99BU049 99BM111
99BU045
Comments
Accept Accept Accept Accept Accept Accept
EXAM CATEGORY I ITEM NUMBER: RG1.141
"P-21A
.Pummarv/ID No. Component ID Component Description Comments
162240 21A RCP-21A FLYWHEEL
Exam Results 99BU004 Accept
ENCLOSURE (2)
BALTIMORE GAS AND ELECTRIC COMPANY
INSERVICE INSPECTION SUMMARY REPORT
FOR CALVERT CLIFFS UNIT 2
ASME BOILER AND PRESSURE VESSEL CODE SECTION XI, FORM NIS-2
1999-2 Class I & 2 with NIS2s Completed
MWO No. RRNo. UEI Planner Dat Section Xl Cl'NIS-2 WrReview Dat 12199302533 94-2-026 2#GC5-2008 04/13/1999 Two Truej 05/17/1999 j2199503843 15-2-066 2#DC2-2002 11/09/1995 Two True 03/3111999 ;2199604119 196-2-075a 2PUMPRC21A(s) 12/09/1996 One True 08/26/1998 2199604119 96-2-075b 2PUMPRC21A 12/0911996 One True 05/19/1999 2199702940 96-2-081 2CKVSI-247 12/09/1996 One True 07/09/1999 2199505020 97-2-129 2#HC-7 06/17/1997 Two True 07/22/1998 2199701412 97-2-130 2HVSI-400 06/18/1997 Two True 10/09/1997 2199702802 97-2-132 2HVCVC-361 09/03/1 997 Two True 09/03/1997 2199705361 97-2-133 2HVSI-400 09/17/1997 Two True 10/07/1998 2199800254 98-2-001 2CKVSI-414 01/26/1998 Two True 04/29/1998 2199704055 98-2-004 2RV200 04/20/1998 One True 06/07/1999 2199704057 98-2-005 2RV201 04/20/1998 One True 05/26/1999 12199800340 98-2-011 2CV4013 04/14/1998 Two True 06/15/1999 12199800339 98-2-013 2CV4011 04/16/1998 Two True 06/01/1999 2199802320 98-2-094 2PZVRC21 08/04/1998 One True 11/11/1998 2199703922 98-2-147 2CKVFW-133 09/09/1998 Two True 06/09/1999 2199604869 98-2-165 Snubber 2-52-20A 01/12/1999 Two True 04/12/1999 2199800573 98-2-166 Snubber 2-11-16A 01/12/1999 Two True 03/18/1999 2199704491 98-2-169 Snubber 2-36-05 01/12/1999 Two True 03/31/1999 2199800579 98-2-170 Snubber 2-45-01A 01/12/1999 Two True 04112/1999 2199800581 98-2-171 Snubber 2-52-05 01/12/1999 Two True 04/12/1999 2199800582 98-2-172 Snubber 2-52-09 01/12/1999 Two True 04/12/1999 2199800587 98-2-176 Snubber 2-52-20 01/12/1999 Two True 04/12/1999 2199704515 98-2-178 Snubber 2-52-26 012/1211999 Two True 04/01/1999 2199800589 98-2-179 Snubber 2-52-34 01112/1999 One True 03/29/1999 2199800590 98-2-180 Snubber 2-52-38 01/12/1999 One True 03/20/1999 2199800591 98-2-181 Snubber 2-52-43 01/13/1999 One True 04/10/1999 2199800592 98-2-182 Snubber 2-52-44 01113/1999 One True 03/29/1999 2199704500 98-2-183 Snubber 2-52-46 01113/1999 One True 03/27/1999 2199704516 98-2-184 Snubber 2-52-50A 01/13/1999 One True 03/27/1999 2199704507 98-2-185 Snubber 2-52-54 01113/1999 One True 03/27/1999 2199704506 98-2-189 Snubber 2-60-12 01113/1999 Two True 03/23/1999 F21 99800593 98-2-191 Snubber 2-61-03 01/13/1999 Two True 04/01/1999 2199800595 98-2-192 Snubber 2-61-04 01/13/1999 Two True 04/10/1999 2199704489 98-2-193 Snubber 2-63-02 01/13/1999 Two True 03/29/1999 2199704437 98-2-194 Snubber 2-63-19 01/13/1999 Two True 04/03/1999 2199704492 98-2-195 Snubber 2-63-24 01/13/1999 Two True 04/03/1999 2199704497 98-2-196 Snubber 2-63-25 01/13/1999 Two True 04/03/1999 2199800596 98-2-197 Snubber 2-63-26 01/13/1999 Two True 03/31/1999 2199704508 98-2-198 Snubber 2-64-09 01114/1999 One True 04/10/1999 2199704505 98-2-199 Snubber 2-64-12 01/14/1999 One True 04/09/1999 2199800597 98-2-200 Snubber 2-64-12A 01/14/1999 One True 04/09/1999 2199704498 98-2-201 Snubber 2-64-15 01114/1999 One True 03/20/1999 2199704495 98-2-202 Snubber 2-64-18 01/14/1999 One True 04/12/1999 2199704512 98-2-203 Snubber 2-64-19 01/14/1999 One True 04/10/1999 2199800598 98-2-204 Snubber 2-64-25 01/14/1999 One True 03/2911999 2199704494 98-2-205 Snubber 2-64-26 01/14/1999 One True 04110/1999 2199704509 98-2-206 Snubber 2-64-27 01114/1999 One True 04/09/1999 2199704490 98-2-207 Snubber 2-64-28A 01/14/1999 One True 04/10/1999 2199800599 98-2-208 Snubber 2-64-30 01/14/1999 One True 03/20/1999 2199800600 98-2-209 Snubber 2-64-30A 01/14/1999 One True 03/20/1999 2199704518 98-2-210 Snubber 2-64-38 01/14/1999 One True 03/29/1999 2199704513 98-2-211 Snubber 2-83-34 1 01/14/1999 Two True 04/10/1999
Page I
07/1 4/1999
11
1999-2 Class 1 & 2 with NIS2s Completed
MWO No. I RRNo. T UEI2199704519 ,2199704517 2199800633 2199800602 2199800603 2199800606 2199800604 2199802432 2199802433 2199700924 2199700926 2199700926 2199801841 2199801841 L2199603215 !2199603215 2199703971 2199403477 2199900912 2199901038 2199705517 ,2199802244
[Planner Dat Section Xi CI4NIS-2 WriReview Dat198-2-212 Snubber 2-64-43 198-2-213 Snubber 2-83-33 98-2-214 Snubber 2-83-16A 98-2-215 Snubber 2-83-02A 98-2-216 Snubber 2-83-03 :98-2-217 Snubber 2-83-04A !98-2-218 Snubber 2-83-15 198-2-252b '2CKVSI-330 98-2-253b 2CKVSI-340 98-2-254a i2PUMPRC21B(s) 98-2-255a 2PUMPRC22B(s) '98-2-255b 2PUMPRC22B 198-2-275a 2CKVSI-434 98-2-275b 2#GC1-2003 9_82-276a 2CKVSI-446 98-2-276b '2#GC1-2002 99-2-012 2ERV402 99-2-014 .2CKVSl-227 99-2-016 2#EB12-2007 ,99-2-025 2#CC4-2009-R9 199-2-028 12CV3939 99-2-036 12PUMPSILPSI21
01/14/1999!One
01/14/1999-Two
01/14/1999 Two
01/14/1999 Two 01/14/1999 Two 01/14/1999 Two 04/03/1999 Two
IN04/03/1999 Two 11/05/1998 One 03/16/1999 One 11/11/1998 One 12/18/1998 Two 12/18/19987Two 12/18/1998 Two 12/18/1998 Two 03/20/1999'One03/02/1999 One True' 07/13/1999 03/20/1999 :Two True' 05/17/1999 04/03/19991One True 06/09/1999 04/07/1999 Two True 06/09/1999 04/22/1999 Two True' 07/01/1999
Page 2
True 04/28/1999
_ • True' 04/10/1999 True' 04/16/1999 True 04/14/1999 True 04/12/1999 True! 04/16/1999 True. 03/19/1999 True 06/08/1999 True 05/25/1999 True 07/12/1999 True 07/14/1999 True 07/13/1999 Truei 07/09/1999 True 07/09/1999 True_ 07/09/1999 True' 07/09/1999 True 07/13/1999
07/14/1999
* FORM NIS-2 6WNER'S REPORT*FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: -Baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, Md. 20657 (address)
Date: 05/17/1999
Sheet I of 2
Unit: Two
R&R No. 94-2-026, MWO No. 2199302533 (P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: Two
4. Identification of System: System Number 052 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: ASME B31.7 1969 Edition, Summer 1971 Add; Class Two
(b) Applicable Sect XI Ed. for Repairs/Replacement' 1983 Edition, Summer 83 Addenda
6. Identification of Components Repaired or Replaced and Replacement Components:
.ame of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
Bechel Energy Steel &
Supply Co. Energy Steel &
Supply Co. Allied Group
2"GCS-2008 80622-GX
80622-GX
25058
N/A 2MOV39 SupportfRestnant N/A Plate, Steel W/2 In. ASME SA-W,
Carbon Steel NIA Angle, 3 In. X 3 In. X I/4 In.;
ASME SA-36, Carbon Steel N/A Nut, Heavy Hex, V2 In. X 13 TPI
SA-194 Gr. 2H1
L977 Replaced 1993 Replacement
193 ipac at
1998 Replacement
7. Description of Work: Modify 2MOV399 Support/Restraint in accordance with ES199800809-000.
8. Tests Conducted: Hydrostatic: IM
Pressure: N/A psi.
Pneumatic: El Nominal Operating Pressure: * Test Temperature: N/A Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Piping System
Plate
Structual Shape
Nut
ASME Code
Stamped (Yes or No)
No No
No
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
No Section Xl Pre-Service NDE was performed in support of this activity.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
• ,• ,/./• •A.R. Zinumcine man Signed: Welding Engineer Date: 05/17/1999
-,_-ýner or Owner's Designee, Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period "//3- 5' to 7 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
dtspf Commissions: _•: Z. . - 1 )
"n National Board, State, and Enidorsemidits
Date: -. € ",g 1995
I' I
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required Required by the Provisions of the ASME Code Section XI
"Baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (aldrd=s)
Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, Md. 20657 4&h=es)
Date: 03/3111999
Sheet 1 of 2
Unit: Two
R&R No. 95-2-066, MWO No. 2199503843 (P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: Two
4. Identification of System: System Number 052 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: ASME B31.7 1969 Edition, Summer 1971 Add; Class Two
(b) Applicable Sect XI Ed. for Repairs/Replacement 1983 Edition, Summer 83 Addenda
Identification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other IdentificationIdentification Built Replacement (Yes or No)
Repaired, Year Replaced, or Built Replacement
Bechtel
Sandvik Steel Inc.
Bechtel
LADISII C0.
DX2-2002
F.5630
F-Z0
N/A Safety Injection Redrc. to Refueling Water Tank
N/A Pipe, 2 In. Sch. 80, Stainless Steel, SA.376, Type 304
N/A Elbow, 90 deg., 2, 30001, Socketweld, SA-182, F304 Stainless Steel
N/A Reducer Insert, 2"x1", 3000N, Socketweld, SA-18., F304 Stainless Steel
1977 Replaced
1977 Replacement
1973 Replacement IM Replacemen
7. Description of Work: Replace 2" recirculation piping adjacent to #22 HPSI pump.
8. Tests Conducted: Hydrostatic: 0 Pressure: 1250 psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: 68 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I 1 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
1. Owner:
2. Plant:
Piping system
Pipe
Elbow
Reducer Insert
ASME Code
Stamped (Yes or No)
No
No
No
No.
Sheet 2 of 2
FORI Jl'-2 (Back)
9. Remarks:
A Section XI SVstem Hydrostatic Test of the affected compor 'as performed durinq the system conditions listed in section 8. of this report. A Section X 3urfa amination of the affe..-ed component was performed to satisy Section XI Pre-Service Requirements. D. the pump suction piping being nonisoiable from the outlet piping, the System Hydrostatic Test required pressure is 625 psi. The HPSI pump was run to provide a pressure of approximately 1200 psi. A Section XI Surface Examination was performed to satisfy Pre-Service requirements.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
•i 7-2 _ ,2 A.R. Zimmerman Signed: Welding Engineer Date: 03/31/1999
orOwner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period // c: to <,' -/'• 5A'-% , and state to the best of n', knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
,6 41lL- 6Y/LQ-Z--- Commissions: 1B19 2-7-4 A4*Z: AIkI cSý1/7' "" pec r's SignaturC National Board., tate, and Eoddrsements
Date:Q9zlý /1'/-1990_.. I/7/'
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section X1
1. Owner: 6altimore Gas Electric Company (name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702
3.. Work Performed by: Baltimore Gas Electric, NED
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, Md. 20657
Date: 8126198
Sheet I of 2
Unit: Two
R&R No. 96-2-075a, MWO No. 2199604119(P.O. no., job no., dc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: One
4. Identification of System: System Number 064 System Name: Reactor Coolant System .
5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. IlI, 1983 Edition, Summer 1983 Add; Class I . One .
(b) Applicable Sect XI Ed. for Repairs/Replacement 1983 Edition, Summer 83 Addenda
dentification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
SOther Identification
Repaired, Year Replaced, or Built Replacement
RCP Seal Sulzer Bingham Inc. 1C865
Seal Sulzer Bingham Inc. 13645-MX IC868
# 21A Reactor Coolant Pump Mechanical Seal
N/A Seal, CartMge Assembly (RCP) /75B-.3V Complete Sulzer
Blngham per FCR 37-0074
1988 Replaced
1988 Replacement
7. Description of Work:
This R&R Plan is to allow replacement of mechanical seal on # 21A Reactor Coolant Pump as necessary. The seal was rebuilt under MWO 1199601175.
8. Tests Conducted: Hydrostatic: 0 Pressure: 2300 psi
Pneumatic: 03 Nominal Operating Pressure: 0 Test Temperature: 532 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I I in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
Yes
Yes
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
A Section X1 System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correcf and that this Replacement conforms to the rules of
the ASME Code, Section XI
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
S i g n d . _ _ _ _ _ _ _ _ _ _ _ _ A .R . Z i m mn e r m a n
Signed: Welding Engineer Date: 8/26/98 OA:ý er'sDesignee, Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period ,'-9 (- to .- /e-"' , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
3, .p2A-tio Commissions: St2 Zt A-JZ , 4 .h Eo/7 Ins~ctos Signature National Board, State, and Endorsemnenta
Date: . 199 7
,X
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
I. Owner: baltimore Gas Electric Company
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
:1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, Md. 20657 (addrs--)
Date: 8126198
Sheet I of 2
Unit: TWO
R&R No. 96-2-075b, MWO No. 2199604119 (P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: One
4. Identification of System: System Number 064 System Name: Reactor Coolant System
5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. III, 1965 Edition, Winter 1967 Add; Class A
(b) Applicable Sect XI Ed. for Repairs/Replacement 1983 Edition, Summer 83 Addenda
£ Identification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
rump Byron JackIson Pump
Cover BWIP International Inc.
171003 793-S-2976 33976
19991-GS
N/A 021A Reactor Coolant Pump 1977 Replaced
NIA Cover Assembly, Heat E.chan=ger, 1996 Replacement Refurbished by EWIP (1997)
Yes
No
7. Description of Work: This R&R Plan is to make necessary repairs to # 21A Reactor Coolant Pump; replacing pump rotating assembly, bolting and cover assembly as necessary.
8. Tests Conducted: Hydrostatic: 0] Pressure: 2300 psi
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: 532 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: A Section XI System Leakage Test of the affected component was performed during the system conditions
listed in section 8. of this report. A Section Xi VT-1 Visual Examination was performed on pump casing flange surface and replacement nuts. A Section X1 VT-3 Visual Examination was performed on pump casing interior.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Signed. ,-Welding Engineer Date: 8/26/98 (• Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period / Z-, - 7i.. to !-/B -2'7 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
SCommissions: ,J,.,ZZt, ,AJt E 44b) 657 lAspectorsSignature National Board, State, and Endorsements
Date: 2,.S- _199_1
1I FORM NIS-2 OWNERWS REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASIE Code Section XI
1. Owner: "Baltimore Gas Electric Company
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (addres)
2. Plant: Calvert Cliffs Nuclear Power Plant S• (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (addrss)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, Md. 20657 (addrew)
Date: 07/09/1999
Sheet 1 of 2
Unit: TWO
R&R No. 96-2-081, MWO No. 2199702940(P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A
Exp Date: N/A Section XI Class: One
4. Identification of System: System Number 052 System Name: Safety Injection
5.(a) Applicable Construction Code and Class: 'ASME B31.1.0 1967 Edition, CCase N-10
(b) Applicable Sect XI Ed. for RepairdsReplacement 1983 Edition, Summer 83 Addenda. Identification of Components Repaired or Replaced and Replacement Components:
Name of Componet
Name of Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
oBuilt Replacement
Repaired, Year Replaced, or
Valve Vlan Engineering
Disc Velan Engineering Co.
Stud Velan Engineering Co.
Nut Velan Engineering Co.
Nut Velan Engineering Co.
0028
IOS23-GX 70S1
53907-GX
10479-GX
90247-GX
WA 22A Reactor Coolant Loop Inlet Check Valve
WA Disc, Vean, 12In, 1500 lb, Swing Check Valve, SA.182, SS 1316, #6 Stemlite, P/N "209033N440
WA Stud, Cover, Velan 12" Swing Chk Viv, P-34754-1,1-7/8 In. X S TPI X 9-.4 in. SA-193 Gr. B7
NWA Nut, Hex, Cver, 1-7/ in. X 8 TIP, SA-194 Grade 7, for 12 In. Swing Check Valve, 1500 Lb.
N/A Nut, Hex, Cover, 1-7/8 In. X 8 TPI, SA-194 Grade 7, for 12 In. Swing Check Valve, 1500 Lb.
LM7 Replaced
1S9 Replacement
191. Replacement
1995 Replacement
1994 Replacement
7. Description of Work: Open and inspect 2CKVSI-247; replace valve disc and bolting as necessary.
8. Tests Conducted: Hydrostatic: 0 Pressure: N/A psi.
Pneumatic: 0 Nominal Operating Pressure: E0 Test Temperature: N/A Deg. F
"OTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I 1 in., information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the
..imber of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)•
No
No
No
No
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
A Section XI VT-1 Visual Examination of the replacernent threaded fasteners was performed to satisfy Section Xl Pre-Service NDE Requirements. Performed a construction code surface examinations of the swing arm damaged areas, and the disc drilled keyway. The replacement valve wed-ge/plug/disc/trim received a Construction Code Surface Examination at the request of the resident ANII.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
A.R. Zimmerman Signed: Welding Engineer Date: 07/09/1999
0 Owner's Designee, Title
Certificate of Inservice Inspection I, the undersigned. holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have ir " led the
components described in this Owner's Report during the period 1Z -6-9 €C to /5-5/- - 'Y3 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
6 'VIZ., A1sisons: , -Z Date: •._Q Isc.,6 r L 199T National Board, State, and Endorsements
L-1
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
I. Owner: Baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (addr=)
2. Plant: Calvert Cliffs .Nuclear Power Plant(name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, Md. 20657 (addres)
Date: 7122198
Sheet I of 2
Unit: TWO
R&R No. 97-2-129, MWO No. 2199505020 (P.O. no.job no, etc.)
Type Code Symbol Stamp: NWA Authorization No.: &A Exp Date: N/A Section XI Class: Two
4. Identification of System: System Number 041 System Name: Chemical Volume Control
5.(a) Applicable Construction Code and Class: ASME B31.1.0 1967 Edition, 1972 Add;
(b) Applicable Sect XI Ed. for Repairs/Replacement 1983 Edition, Summer 83 Addenda
" Identification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
.Repaired, Year Replaced, or Built Replacement
Piping System Bechtel
Bushing, Mid Atlantic Reducing Instrumentation Inc
2"HC-7
698
N/A CVC Basket Strainer (2BS209) Drain-Off Line
N/A Bushing, Pipe, Reducing, 2" Male NPT Thread to 1" Female NPT Thread
1977 Replaced
1997 Replacement
7. Description of Work: Replaced existing 2" NPT stainless steel drain line assembly off 2BS209 to 3/4" bent tubing and 3/4" MK2200 Isolation valve in accordance with ES199601774.
8. Tests Conducted: Hydrostatic: [3 Pressure: I04 psi.
Pneumatic: E3 Test Temperature:
Nominal Operating Pressure: ID 154 Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I1 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
No
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: A Section XI System Inservice Test of the affected component was performed during the system conditions
listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replaceernenforms to the rules of the
ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
/• •, • ••. =•,_• C.H. Ballard
Signed: " ngineering Technician Date: 7/22/98 Owner or Owners Design , fie
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period z-/ 7- 27 to e-/- - 9 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
-L eg n ztAu ommissions: 07-'ar A•UZ. ,T"t, •=.'.7 Slnspý'ctor'A ignature ational Board, State, and Endorsement
Date: •.//V ZT- 1998
C,
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner Baltimore Gas Electric Company (name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (adde=)
3. Work Performed by: Baltimore Gas Electric, NED
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, Md. 20657 S. (=an= . . . .
Date: 1019197
Sheet I of 2
Unit: Two
R&R No. 97-2-130, MWO No. 2199701412 (P.O. no..job no.. eta.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: Two
4. Identification of System: System Number 052 System Name: Safety Injection
5.(a) Applicable Construction Code and Class: ASME Draft Code for Pumps & Valves for Nuclear Power, 1968 Ed. thru March '70 Addenda Class Two
(b) Applicable Edition of Section XI Utilized for Repairs or Replacements:
6. Identification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manuacturers Serial Number
National Board No.
1983 Edition, Summer 83 Addenda
ASME Repaired, Code
Year Replaced, or Stamped Built Replacement (Yes or No)
Other Identification
Valve Velan Enginnerlng CO.
T9sl1
7. Description of Work: Seal weld existing leak-off plug to 2HVSI-400 valve body.
8. Tests Conducted: Hydrostatic: 0 Pressure: N/A
Pneumatic: 0 psi. Test Temperature:
Nominal Operating Pressure: 0 N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
N/A 2" Safety Injection Welded Bonnet 1977 Gate Valve
Repahred No
q
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
No Section XI Pre-Service NDE was performed in support of this activity.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correcf and that this Repair conforms to the rules of the
ASME Code, Section XI.
Type Code Symbol Stamp: NIA Certificate of Authorization No.: N/A Expiration Date: N/A
A.R. Zimmerman Signed: Welding Engineer Date: 10/9/97
ner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Arkwright Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period &-/,1-9-7 to /0-7-9"7 and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
Factory Mutual Engineering Association
Commissions: ?-"(, ,,JZ- ,,,- o I,/7 " 1s�IpLZor'signature National Board, Stfte, and Endorsements
Date: Z-7 1990
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required Required by the Provisions of the ASME Code Section X1
1. Owner. Baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203
2. Plant:
(add=es)
Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (adress)
3. Work Performed by: Baltimore Gas Electric, NED
(nCam) CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657
Date: 913197
Sheet I of 2
Unit: Two
R&R No. 97-2-132, MWO No. 2199702802(P.O. no., job no., etM)
Type Code Symbol Stamp: NIA Authorization No.: N/A
Exp Date: N/A Section XI Class: Two
(addres)
4. Identification of System: System Number 041 System Name: Chemical Volume Control
5.(a) Applicable Construction Code and Class: USAS B31.7 Class Two, 1969 Edition thru Summer 1971 Addenda
(b) Applicable Edition of Section XI Utilized for Repairs or Replacements: 1983 Edition, Summer 83 Addenda
Identification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
Valve Velan Englanering Co.
2HVCVC-361 N/A DRN CHG LINE In PEN RM 1977 Repaired
7. Description of Work: Seal weld 1/4" leak-off plug on 2HVCVC-361.
8. Tests Conducted: Hydrostatic: E0 Pressure: WA
Pneumatic: 0 3si. Test Temperature:
Nominal Operating Pressure: 0 WA Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
No Section X1 Pre-Service NDE was performe'
Applicable Manuf
;upport of this activity.
r's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this
ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Signed: 11r Owner or er's Designee, Title
R.E. Cantrell Sr. Engineer
Repai conforms to the rules of the
Date: 9/3/97
Certificate of Inservice Inspection
I, the undersigned, holding a valid conirnssion issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Arkwright Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period 5"-/(- - 9 7 to 9 -3-' - 7 , and state to the
best of my knowledge and belief, the 0 has performed examinations and taken corrective measures described in this
Owner's Report in accordance with the rements of the ASME Code, Section XI.
By signing this certificate neithe, i.e Inspector nor his employer makes any warrant, expressed or implied, concerning
the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his
employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or
connected with this inspection,
Commissions: OI 64ZZd, &J C. *'ttO 6 ;(7Ins cio5A Signature
Date• J#,O 3., 199__7__IV-
Factory Mutual Engineering Association
ational Board, State, and Endorsement
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
Baltimore Gas Electric Company (name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203(addrms)
Calvert Cliffs Nuclear Power Plant (name)
Date: 1017198
Sheet I of 2
Unit: Two . .
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
R&R No. 97-2-133, MWO No. 2199705361 (P.O. no, job no, etc.)
Type Code Symbol Stamp: N Authorization No.: NIA Exp Date: N/A Section XI Class: Two
4. Identification of System: System Number 052 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: ASME Draft Code for Pumps & Valves, 1968 Edition, March 1970 Add; Class Two
(b) Applicable Sect XI Ed. for Repairs/Replacement
7dentification of Components Repaired or Replaced and Replacement C
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
1983 Edition, Summer 83 Addenda
omponents: ASME
Repaired, Code' ,Other Year Replaced, or Stamped
Identification Built Replacement (Yes or No)
Valve Velan Enginnerlug Co.
T'1515 MA 2" Safety Injection Welded Bonnet Gate Valve
1977 Repaired
7. Description of Work: Re-perform seal weld on existing leak-off plug to valve stuffing box which failed PMT under MWO# 2199701412.
8. Tests Conducted: Hydrostatic: 0 Pressure: 15 psi.
Pneumatic: 0 Nominal Operating Pressure: [ Test Temperature: M4 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
1. Owner.
2. Plant:
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: A Section XI System Functional Test of the affected component was performed during the system conditions
listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Repair conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Signed: A.R. Zimmerman Date: Signe- Welding Engineer 10/7/98 Owner!__er's Designee, Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period -/ 7'-97' to , - - , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
.,,•--••- Commissions: AJz, 8 a _s=, aW ,-l 4 L7 ./ nspetor's Signature National Board, State. and Endorsements
Date: jj•,, 7- 1996
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203
2. Plant: Calvert Cliffs Nuclear Power Plant (nam)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702
3. Work Performed by: Baltimore Gas Electric, NED
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (adrc)
Date: 4129198
Sheet I of 2
Unit: Two
R&R No. 98-2-001, MWO No. 2199800254(P....o job noetc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: Two
4. Identification of System: System Number 052 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: Combustion Engineering Spec. 8067-487-710 wlCode Case N-10
(b) Applicable Sect XI Ed. for RepairsiReplacement 1983 Edition, Summer 83 Addenda
Identification of Components Repaired or Replaced and Replacement Components:
Nameof Manufactrer
ManSralNuaers Serial Number
National Board No.
Other Identification
Year Replaced, or Built Replacement
ASME Code
Stamped (Yes or-No) -
VW nEngi&eerWg Co.
Co.
1464
93710-GX 6592
WA No. 22 Hkgh Pream Pump Safety 197 Injection Pinup dLscharge cbeck valve
N/A Disc for VelanS .I900 Lhxswing 1994 check valve, ASME SA-12 F316 (Hardfaced ws•ellte #6)
7. Description of Work: Install new disc (s/n 6592) on #22 HPSI Pump Discharge Check Valve 2CKVSI-414. Remove Anti-Rotation lugs on disc In accordance with MCR 93-052-022.
8. Tests Conducted: Hydrostatic: 0 Pressure: N/A
Pneumatic: 0 psi. Test Temperature:
Nominal Operating Pressure: 0 N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Name of Componet
Valve
Disc
Replaced
Replacement
No
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: No Section XI Pre-Service NDE was performed in support of this activity. The replacement valve wedge/plug received a Construction Code Surface Examination at the request of the resident ANII.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correcf and that this Replacement conforms to the rules of the ASME Code, Section XM.
Type Code Symbol Stamp: NIA Certificate of Authorization No.: N/A Expiration Date: N/A
C. H. Ballard Signed: Engineering Technician Uwe """or Owneres Designe , Title . Date: 4/29/98
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the components described in this Owner's Report during the period /- Z3 - ?& to /-30 - , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
-1 l S Commissions: &Sg4?.Z A,, Z ., *7A ,6e'7 oe.ature National Board State, and Endorsements
Date: s •4 t L ZT 199,J
.FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required Required by tie Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company (name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address),
2. Plant: Calvert Cliffs Nuclear Power Plant(name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
Date: 06/07/1999
Sheet I of 2
Unit: Two
R&R No. 98-2-004, MWO No. 2199704055 (P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: One
4. Identification of System: System Number 064 System Name: Reactor Coolant System
5. (a) Applicable Construction Code and Class: ASME B&PV Code Sect II1, 1968 Edition, Winter 1968 Add; Class A, CCases N-2, N-10
(b) Applicable Sect XI Ed. for Repairs/eplacement 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWE/WL
" Tdentification of Components Repaired or Replaced and Replacement Components:
Name of Componet
Name of Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
Valve Dresser Industrial Valve Co.
Valve, Relief Dresser Industries, Inc.
BN-04375
2905 BV-02950
N/A 2-1/2" CC-10-2007; Unit-2 Pressurizer Safety Relief Valve
IWA Valve, Consolidated Closed Bonnet Maxiflow Safdy, 2-1/2 In. Model$1739A
1970 Replaced
1"7 R• t
7. Description of Work: Replace Unit-2 PressurizerSafety Relief Valve, 2RV200. No additional parts are specified, as this MWO will replace this valve in its entirety.
8. Tests Conducted: Hydrostatic: 0 Pressure: 2300 psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: 532 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
Yes
Sheet2of 2 •
FORM NIS-2 (Back)
9. Remarks:
A Section XI VT-1 Visual Examination of the replacement threaded fasteners was performed to satisfy
Section XI Pre-Service NDE Requirements. A Section XI System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the \SME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
A.R. Zimmerman Signed: -. Welding Engineer Date: 06/07/1999
O•€•wner's Designee, Title
Certificate of Inservice Inspection
I, the unders: gned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period %-58., to -6- !-98 , and state to the
best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this
Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning
the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his
employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or
connected with this inspection.
______ Commissions: /-JL9ZZrG A,• , _
""or's Signaturc National Board, State, and Endorsements
Date: 199.__ VIV
Alexandia. Louisiana USA
FORM NVR-1 REPORT OF REPAIRIN MODIFICATION 0 OR REPLACEMENTS 4 OF NUCLEAR PRESSURE REUEF DEVICES
Dresser Industries Inc.. Dresser Valve And Conarods Division. Industrial Valve 1. Work performed by Opiration 01-25720-0
tism o ofowgsnaa.A 7.O.*ejb Me.. .& Intersection Hwy 167 &'3225 North Alexandrk Louisiana
2. Work poned or BG&E 1650 Calverts Cliffs Parkway Lusby, MD 20657
Owner BG&E Calverts Cliffs Nuclear Station 1650 Calvert.' Clrfs Parkway nmal Lusby, MD 2065
4. Nameads and Ientication of nuear powerp ant BG&E Calverts Cliffs Nuclear Station 1650 Calvert Cliffs Parkway Lusbv. HD 20657
L. a epaked pressure reief device: Safety Valve b. Name of marnuadcurer .2m. p I I. .m. c Identifying nos. 31739A BV-.02950 N/A Steam 2-1/2" 1982
Pim)Q Vt5. 64;ý rpp *f.tj gsa. s.qjv~jf~
d, ConstrucionCode ASME Section I1 1968 Winter 1968 N/'A N/A (.,eoam'4oonj (,da) (addend)P fd, Ca.(ala (Cae cae)
L ASME Code Seton )l appaeforInservie enspecio 1983 Summer 1983 N/A 0 o!(addanduj P*44 C869(183
7. ASME Code Section )a used Worrepairs. modifications. or replacements 1983 Summer 1983 NIA (.d1mo) (.ddmadal (Code Casale]
SCo n s u c io n• C o d e us ed fo r r e p airs , m od ific a tio n s . o r r p l a c e m e t rs 1 9 6 8 W in t e r 1 9 6 8 N / A (od•,nj (ad.ed,.al loud. CPS,(.]D
anreTponsuies Same as Item #1
1. Opeag pre.su= 2485 Slowdown (' ap8c) N/A Set pressure and blowdown aIstment madeat Wyle Laboratories, Huntsvil t nii. using Steam
*--S.* €,•qt&ml
1t. Oescrtonofendude name and ii number dreplaceme.tparts) Disassembled, inspected cleaned, Assembled and Tested
1ZRFeCs: Drilled 3/8" hole in disc holder to meet current design
CERTIFICATE OF COMPLIANCE L.A " 0 ' certfy t1at the statements made In fthi eport are correct and thie fepai. modification or replacement of the Pressure refet devices described above .•m • to Se n X e ASME Code and fte tamW d W-R iudes. N'ati.ahiSdd Celfticale of kziortation No. 107 to use te 7W damp epres 6/29 .19 9.Harkisial Board Certificate of AuthoriaallonlNo. 48 to useD spill expirs 6/10".11.2 Date 1 d-., Signed same as te-nIabove. AIt 8m ene&
inameof etnpat egnizOa~on 1mI& ud repm iAalu3 -I-nC
A "'), •. 'CERTiFICATE OF INSPECTION
C~mpten-1 ssud b th Juisdctin o k~_7t #*,3 &and 7 loed by The Hartford Steam Boaler Inspection a n mncAzmS Cof dart~fordCT have inspected te rep modum'iconb reptacement descrbedi• f th eport on - i 8 19 q7 and state that to the best of k- •.i• *and begef. fths rea. modiiction or replacement has been completed I s=ardance with Se,:on Xt of the ASME Code an the Natlion Board Inspection Code "WR and "N•
rlues. By snin fth c•.t•icae. ne.e the undersined nor my employer makes any warranty. eW-3sed or inpseA concerning the repair. modification or replacement descrbed in Wa report. Furthermore. neier the undersigned nor my employer shaW be Wabe. in any manner for any personal "irt. property -damage or loss of any kind arWisg from our connected with th inspection..a
Date dl/7•. ,o 49 _,7 . ,. _,.-.-.i4
IaudCeq. and go.)
- . o
I
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required Required by the Provisions of the ASME Code Section XI
1. Owner: - Baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
Date: 05126/1999
Sheet I of 2
Unit: Two
R&R No. 98-2-005, MWO No. 2199704057 (P.O. no., job no., etc.)
Type Code Symbol Stamp: NIA Authorization No.: N/A Exp Date: N/A Section XI Class: One
4. Identification of System: System Number " 064 System Name: Reactor Coolant System
5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect.1 i, 1968 Edition, Winter 1968 Add; Class A, CCases N-2, N-10
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWE/IWL
Tdentification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other IdentificationIdentification Built Replacement (Yes or No)
Repaired, Year Replaced, or BuIlt Replacement
Valve Dresser Industrial Valve Co.
Valve, Relief Dresser Industries, Inc.
BM07949
290 BS03213
N/A 2-112" CC-1O-2008; Unit.2 Pressurizer Safety Relief Valve
N/A Valve, Consolidated Closed Bonnet Maxlflow Safety;, 2-1/2 In. Model 31739A
1977 Replaced
1997 hepla-enxent
7. Description of Work: Replace Unlt-2 Pressurizer Safety Relief Valve, 2RV201. No additional parts are specified, as this MWO will replace the valve in its entirety. ... - -
8. Tests Conducted: Hydrostatic: 0 Pressure: 2300 psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: 532 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
Yes
Yes
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
A Section XI System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report. A Section XI VT-1 Visual Examination was performed for valve pressure retaining bolting.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Signed:•/ •,f9 A.R. Zimmerman
Signed / Welding Engineer Date: 05/26/1999
Sor Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period e-/8 98 to 5- 5- -, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
__•_. Commissions: A/ia ezz& , A14., ,, _
InSpector' SSignature • National Board, State, and Endorsements
Date: -Za!Jý7 199_9
6/
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required Required by the Provisions of the ASME-.•Code Section XI
1. Owner: ialtimore Gas Electric Company (name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant(name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
Date: 06/15/1999
Sheet 1 of 2
Unit: Two
R&R No. 98-2-011, MWO No. 2199800340 (P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A
Authorization No.: N/A
Exp Date: N/A Section XI Class: Two
4. Identification of System: System Number 083 System Name: Main Steam & SG Secondary Side & SG
5. (a) Applicable Construction Code and Class: ASME Draft Code for Pumps & Valves, 1968 Edition, March 1970 Add; Class Two
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWEIWL
lentification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built .Replacement
Masonellan International Inc.
Masonellan
F7984
9.589-GX A16671-3
?VA #22 SWG Bottom Blowdown Containment Isolation Valve
N/A Plug, valve, 2", 600 lb., Masonellan pnu O3434-023-lA7
1977 Replaced
199S Replacement
7. Description of Work:
Overhaul bottom blowdown containment isolation valve, 2CV4013, for #22 steam generator; replace valve plug as necessary.
8. Tests Conducted: Hydrostatic: 0"
Pressure: N/A psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: N/A Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Valve
Ping
ASME Code
Stamped (Yes or No)
Yes
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
No Section XIPre-Service NDE was performed in support of this activity. The replacement valve wedge/pluq/disc/trim received a Construction Code Surface Examination at the request of the resident ANII.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Sind Ile .•7•• A.R. Zimmerman Signed: Welding Engineer Date: 06/15/1999
Own 0 D/59nee, Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period -el- /3 - 9 a to S- (- ,7 ] , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
-. ommissions: A/9 <ZZC. ,I,/ , . nature National Board, Staie, and Endorsements Date: G'f/ , g 24 !1999.____
A'1(/
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required Required by the Provisions of the ASME Code Section XI
1. Owner: 'Baltimore Gas Electric Company Date: 06101/1999 (name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 Sheet 1 of 2
(address)
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
Unit: Two
R&R No. 98-2-013, MWO No. 2199800339 (P.O. ,o.. job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: . TWO
4. Identification of System: System Number 083 System Name: Main Steam & SG Secondary Side & SG
5. (a) Applicable Construction Code and Class: ASME Draft Code for Pumps & Valves, 1968 Edition, March 1970 Add; Class Two
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWE/IWL 7dentification of Components Repaired or Replaced and Replacement Components:
Name of Manufacturer
Manufacturers Serial Number
National Board No.BordNo .... Identification ....
OtherRepaired.
Year Replaced, or
International Inc. Masonellan
1i0904.-24
95589-GX 3820721
N/A #21 S/G Bottom Blowdown Containment Isolation Valve
N/A Plug, valve, 2", 600 lb., Masonellan p/n 01343"23.IA7
1977 Replaced
1995 Replacement
7. Description of Work: . Overhaul bottom blowdown containment isolation valve for #21 steam generator;, replace valve plug as necessary. .
8. Tests Conducted: Hydrostatic: r
Pressure: N/A psi.Pneumatic: [] Nominal Operating Pressure: 0
Test Temperature: N/A Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I 1 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Name of Componet
Plug
ASME Code
Stamped
Yes
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
No Section Xl Pre-Service NDE was performed in support of this activity. The surface examination of the
replacement plugI was waived by the ANI.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Z 9i2 _______,_,.___,,___,__
A.R. Zimmerman Signed: "I ____-.-/IIWelding Engineer -Date: 06/01/1999
2ýý.4r Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period ____-1_-16-96 to -9/'{- '• , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning
the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
S• Ins n ur National Board, State, and Endorsements
C,
FORM NIS-2 OWNER'S REPORTFOR REPAIRS OR REPLACEMENTS As Required Required by the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company (name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address) ...
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
Date: 11111198
Sheet I of 2
Unit: Two
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 R&R No. 98-2-094, MWO No. 2199802320 (address) (P.O. no.. fob no.. etcI
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: One
4. Identification of System: System Number 064 System Name: Reactor Coolant System
5. (a) Applicable Construction Code and Class: ASME B&PV Code Sect. II, 1965 Edition, Winter 1967 Add; Class A CCases: 1336, 1338-3, 1359-1
(b) Applicable Sect XI Ed. for Repairs/Replacement
Identification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
1986 Edition
ASME Repaired, Code
Year Replaced, or Stamped Built Replacement (Yes or No)
Pressure Vessel
Nozzle
Combustion Engineering
Combustion Engineering Inc.
CE 67603
40316-GX
20916 No. 21 Pressurizer upper penetration 2-LT-! 1OX
N/A Nozzle Ass. P/N E-9343-C(90-24
1972 Replaced
1990 Replacement
7. Description of Work: Perform Modification per ES1 99801103 and FRAM-14 on #21 Pressurizer upper penetration 2-LT-1 lx.
8. Tests Conducted: Hydrostatic: 0 Pressure: 2305 psi.
Pneumatic: 0 Nominal Operating Pressure: E] Test Temperature: 532.5 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Yes
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
A Section Xl System Hydrostatic Test of the affected component was performed during the system conditions listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization NoY7N/A Expiration Date: N/A
Signed: /( A.R. Zimmerman Sge Welding Engineer 11/11/98
S'or Owner's Designee, Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period '7- Z - 9 5 to 8 - /,- 3 S , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
,I-i "-,Z -- Commissions: /-! 5 Z C s-Z ,-6-i " Inspector's Signature National Board, 9tate, and Endorsements
Date: ,/ / -. ,/ l99. t
"IFORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: taltimore Gas Electric Company (name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: I. Calvert Cliffs Nuclear Power Plant(name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. ' Work Performed by: Baltimore Gas Electric, NED(name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
Date: 0610911999
Sheet I of 2
Unit: Two
R&R No. 98-2-147, MWO No. 2199703922 (P.O. no.. job no., etc.)
Type Code Symbol Stamp: NIA Authorization No.: N/A Exp Date: N/A Section XI Class: Two
4. Identification of System: System Number 045 System Name: Feedwater
5.(a) Applicable Construction Code and Class: ' ASME B31.1.0 1967 Edition, B16.5, B16.10
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad: 92 Ed summer 92 Ad for IWE/IWL
6. Identification of Components Repaired or Replaced and Replacement Components:
Name of Componet
Name of Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
Valve Rockwell International
Retainer Edward Valves Inc.
Cover Edward Valve Inc.
Edward Valves Inc.
QU-83
12001
24410
1077S-GX
N/A No. 21 Stemn Generator Feed 1977 Replaced Water Supply Check Valve
WfA Retainer, Hinge Pin, Check 1997 Replacement Valve, 16", Edwards Fig. 97"0Y .W ... A
KfA C.oer, Pretsse Seal, Check 1998 Replacement - . Valvre, 16", Edwards Fig. 970Y N/A Retainer, Cover, Check Valve, 1995 Replacement
16", Edwards Fig. 970Y.
7. Description of Work: Perform maintenance on Feedwater Check Valve 2CKVFW-133; replace parts and bolting as necessary.
8. Tests Conducted: Hydrostatic: 0 Pressure: 870 psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: 400 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Retainer
ASME Code
Stamped (Yes or No)
No
No
No
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: A Section XI System Inservice Test of the affected component was performed durinq the system conditions
uistea In -ction 8. of this report. ANI Hold Point: The replacer. _nt "Pressure Seal Cover" prior to installation.
SANI witnessed a surface examination of the
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Repla'cement conforms to the rules of
A.R. Zimmerman "Signed: Welding Engineer Date:
or Owner's Designee, Title06/09/1999
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period '9 -'-36 to -- S'-.5 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
65 ______ Commissions: /J.8ZZ- , AJ.Z/ 472)-n'A_7 - ture. "=" National Board, State, and Endorsements
Date: 199
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 12. 1999 (name)
G&E Buildinz, P.O. Box 1475, Baltimore. MD, 21203 Unit: Two (addrs)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-165 (name)
1650 Calvert Cliffs Parkway, Lusby, MD 20657-4702 MWO No: 2199604869 (addrs) (PO.job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: .. _ (name) Authorization No:..IA Exp Date: N1,A
1650 Calvert Cliffs Parkway: Iusby, MD 20657-4702 Section XM Class: Two (address)
4. Identification of System: System Number. 52 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IE/IWL')
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repair Code Name of Name of Manufacurers National Other Year Replaced, or Stamped Comtponent Mfanufacturer SeralNumber Board No. kdentification Built Replacement (Yes or No)
HYDRAULIC GR/NNELL (CYL) N/A 2-52-20A N/A Replaced No SNUBBERS CORP. 73345358-53
(VB) 8869B-l-SP
HYDRAULIC GRINNELL (CYL) N/A 2-52-20A 1998 Replacement No SNUBBERS CORP. 73355668-196
(VB) 9514B-1-SP
7. Description of Work: PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-52-20A
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 1 1", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
oneet 2 O01
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: Senior Engineer Date: April 12, 1999
Olwner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/Z-5Y to 4-7-j- , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
-__nspectors __i___t___ Commissions: &Bor S24Ate, e-d En)ren 7 Inspctors Siia eNational Board, State, and 9ndorsements
Date: 19j Z.
L
199')_m m _
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company - Date: March 18, 1999 (name)
G&E Buildinz, P.O. Box 1475, Baltimore, MD, 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-166 (name)
1650 Calvert Cliffs Parkway; Lmsby. MD 20657-4702 MWO No: 2199800573 (addr) (PO. job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: K/A (name) Authorization No:.IA Exp Date:._N/A
1650 Calvert Cliffs Parkway; Lusby. MD 20657-4702 Section XI Class: Two (addss)
4. Identification of System: System Number: Li System Name: Service Water Cooling 5. (a) Applicable Construction Code and Class: USAS B31.1 1967 ED. thru 1972 ADD.
(b) Applicable Edition of Section X[ Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(E y )
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME S~Code Name of Name of Manufaeturen National Other Year R•la•C, or Stamped C4nonn anufaawe Serial Number BadNo. kdentification Built Ranlacement IV~ or
HYDRAUUC GRINNELL (CYL) N/A 2-11-16A N/A Replaced No SNUBBERS CORP. 79404793-42
(VB) 80102860-5
HYDRAUUC GRINNELL (CYL) N/A 2-11-16A 1995 Replacement No SNUBBERS CORP. 91219610-10
(YB) 17091-4
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBERP 2-11-16A
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: Senior Engineer Date: March 18, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /- / - to 3-/'-7-1 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
__ _ __ _ __ _ __ _ __ _ _ Commissions: AAZ24 Ar,~ I Inspector's Srgnatire National Board, State, and Endorsements
Date: .. z 1999/o
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: March 31, 1999 (name)
G&E Buildin!. P.O. Box 1475, Baltimorei MD. 21203 Unit: Two (addrew)
2. Plant: Calvert Cliffs Nuclear Power Plant R&RNo: 98-2-169 (nane)
1650 Calvert Cliffs Parkway, Lusby, MD 20657-4702 MWO No: 2199704491 (addres) (PO, job no.)
3. Work Performed by: Baltimore Gas Electric. NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No:N/.A Exp Date: N/A
1650 Calvert Cliffs Parkway- Lusby, MD 20657-4702 Section XI Class: Two
(addres)
4. Identification of System: System Number: 36 System Name: Auxiliary Feedwater
5. (a) Applicable Construction Code and Class: USAS B31.1 1967 ED. thru 1972 ADD.
(b) Applicable Edition of Section XI Utilized for RepairslReplacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWEI1VL)
6. Identification of Components Repaired or Replaced, and Replacement Components: AS•ME R: epalr Code
Name of Name of Manufactue National Other Year Replaced, or Stamped Component Manufacturer Serial Number BoardNo. Identification Built Replacement (Yes or No)
HYDRAUUC GRINNELL (CYL) N/A 2-36-5 N/A Replaced No SNUBBERS CORP. 79404793-2
(VB) 79398753-541
HYDRAULIC GRINNELL (CYL) N/A 2-36-5 1999 Replacement No SNUBBERS CORP. 79404797-69
(VB) 79398753-347
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-36-5
8. Tests Conducted: Hydrostatic: [I Pneumatic: E] Nominal Operating Pressure: E0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x I 1", (2)
information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number
of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: ... . Senior Engineer Date: March 31, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /- /Z - to -3 - .3 /- 97 ,and state to the best of my knowledge and.. lief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
___ Commissions: AIS X.rZS. 1I8MA 4O . inspect gnature National Board, State, and Endorsements
Date: APRL I/- 991997
-r
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
A -•As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 12. 1999
G&E Buildinz, P.O. Box 1475. Baltimore, MD. 21203 Unit: Two (addres)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-170 (name)
1650 Calvert Cliffs Parkway: Lmsbyv MD 20657-4702 MWO No: 2199800579 (address) (P0. job no.)
3. Work Performed by: Baltimore Gas Electric. NED, CCNPPD Type Code Symbol Stamp: NIA (name) AuhorzationNo: NIA Exp Date: N/A
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 Section XI Class: Two
4. Identification of System: System Number. 45 System Name: Feedwater
5. (a) Applicable Construction Code and Class: .USAS B31.1 1967 ED. thru 1972 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IVE/WL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repalrct Code Name of Name of Manufacture= National Other Year Replaced, or Stamped
Compoment Manufacturer Serial Number Board No. Identification Buit Replacement (Yes or No)
HYDRAULIC GR1NNELL (CYL) N/A 2-45-1A N/A Replaced No SNUBBERS CORP. 76181172-11
(wB) 1644-5-A
HYDRAULIC GR]NNELL (CYL) N/A 2-45-IA 1995 Replacm.ent .. No SNUBBERS CORP. 90203740-9
(VB) 15156-62
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-45-IA
8. Tests Conducted: Hydrostatic: [ Pneumatic: 0 Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets inform of lists, sketches, or drawings maybe used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: §.,, -_ Senior Engineer Date: April 12, 1999
'wner o-rOw-n~rerý sDesignee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/2-9' to ,'-' -? 9 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
-/L ~ Commissions: AI,'Z,/ _._ A 1- -,' b611'7 "Inspector's ignalare National Board. State, and Endorsements
Date: /,Z 199'1
Sheet 2 of 2
Sheet I of 2.
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 12, 1999 (name)
G&E Building, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two (adds-=)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-171 (name)
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702 MWO No: 2199800581 (addres) (PO.job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: NIA (name) Authorization No: NIA Exp Date: N/A
1650 Calvert Cliffs Parkway, Lusby, MD 20657-4702 Section XI Class: Two (addrez)
4. Identification of System: System Number 52 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed.. Summer 92 Ad.CRE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Replair Code Name of Name of Manufacturers National Other Year Replaced, or Stamped
_Cmponent Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAUI.C GRINNELL (CYL) N/A 2-52-5 NIA Replaced No SNUBBERS CORP. 72237426-172
(VE) 5825-2-A
HYDRAUIC GRINNELL (CYL) N/A 2-52-5 1998 Replacement No SNUBBERS CORP. 73306121-65
(VB) 7721B-2-A
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-52-5
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 1 1", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2 FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Signed: Senior Engineer Date: April 12, 1999 Owner or Owner -si-gn-e le
Certificate of Inservice Inspection
I, the undersigned, holding a valid commis.ion issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /1/2 - 3 to -- 99 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
-• Inspet/r's1)gn 2r# r J Commissions: A/1 Z, 2 &,,AAA1,,-. 414.17/7 Inspector's Si ure National Board, State, and Endorsements
Date: 6 . , 199
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 12. 1999 (name)
G&E Building, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-172 (name)
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 MWO No: 2199800582 ,,• (PO.job no.)
.3. Work Performed by: Baltimore Gas Electric. NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No: NIA Exp Date: NIA
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 Section XI Class: Two (addre)
4. Identification of System: System Number. 52 System Name: Safety Inlection
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/JVL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repaired Code Name of Name of Manufacrum National Other Year Replaced, or Stamped .Camponent Manufacturer Serial Number Board No. Identification Built Repacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-52-9 NIA Replaced No SNUBBERS CORP. 73319134-18
(VB) 8109B-I-SP
HYDRAULIC GRINNELL (CYL) N/A 2-52-9 1999 Replacement No SNUBBERS CORP. 79404793-27
(VB) 80102860-9
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-52-9
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of fists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 1 1", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
-- I -
' --• ) Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: Senior Engineer Date: April 12, 1999
Ofner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/Z-T'1 to 49'- 7- 97) , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
P2 -w % _ .) Commissions: AI/8 ZaC•.. ,Qr . 6 V7 Inspector's Signatup National Board, State, and Endorsements
Date: ( 2 e,.ZL 26 199./o
C
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 12, 1999 (name)
G&E Building, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-176 (name)
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 MWO No: 2199800587 (addres) (PO, job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: NIA (name) Authorization No:yN/A Exp Date: NIA
1650 Calvert Cliffs Parkway. Lusby. MD 20657-4702 Section XI Class: Two (addres)
4. Identification of System: System Number: 52 System Name: Safety Infection
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
SRq~air4 Code Name of Name of Manufacturer National Other Year Replaced, or Stamped Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-52-20 N/A Replaced No SNUBBERS CORP. 73355668-203
HYDRAULIC GRINNELL (CYL) - - N/A 2-52-20 1997 Replacement No SNUBBERS CORP. 73355668-S1
(VB) 9645B-1-SP
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER- 2-52-20
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2)" information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2 FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section X).
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: .- A 4Senior Engineer Date: April 12, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-[2-?9 to _______ , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section X3.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
- Commissions: AJ 2 g -2 z A.J /r- ,75 46'7' "Inspector's Sigratuie National Board, State, and Endorsements
Date: ;ý "•z, •'. 1999
6'*
i
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 1. 1999
G&E Buildin2. P.O. Box 1475, Baltimore, M .D 21203 Unit: Two (address)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-178 (name)
1650 Calvert Cliffs Parkway. Lusby, MD 20657-4702 MWO No: 2199704515 (address) (PO, job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authoization No: NIA Exp Date: NIA
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 Section XI Class: Two (address)
4. Identification of System: System Number: 52 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: USAS B31.0 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(lWE/1IL')
6. Identification of Comp0nents Repaired Or Replaced, and Replacement Components:
ASME Repaired. Code
Name of Name of Manufacturers National Other Year Replaced, or Stamped Compoet Mauatrr Sera Numbe Boar No. Idenifiati~on, B,,ilt Replacement (Ysor No)
HYDRAULIC GORNELL (CYL) N/A 2-52-26 N/A Replaced No SNUBBERS CORP. 78325466-85
(VB) 78308457-121
HYDRAUUC GRINNELL (CYL) N/A 2-52-26 1999 Replacement No SNUBBERS CORP. 76121499-446
(VB) 136987-118D71C
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-52-26
8. Tests Conducted: Hydrostatic: El Pneumatic: 0] Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is S-1/2"x 1 1", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: / Senior Engineer Date: April 1, 1999
O)wner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period / - / 2 - 95 to 6"- / - , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASNvE Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
,,-._•J Commissions:/N8 7,&.'-/IJAA f")0 7Z 6Ins S ure National Board, State, and Endorsements
Date: A PRIL /,Y .199_9_
U S"
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: March 29, 1999 (name)
G&E Building. P.O. Box 1475, Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-179 (name)
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 MWO No: 2199800589 (addresi) (POjob no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Typc Code Symbol Stamp: NZA (name) Authorization No: NIA Exp Date: NIA
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 Section XI Class: One (address)
4. Identification of System: System Number: 52 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IfWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repaired. Code Name of Name of Manufacturers National Other Year Replaced, or Stamped SConv t Manufacturer Serial Number Board No. identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 242-34 N/A : Replaced. No SNUBBERS CORP. 72252902-225
(VB) 4469-2-A
HYDRAULIC GR1NNELL (CYL) N/A 2-52-34 1999 Replacement No SNUBBERS CORP. 73345359-66
(VB) 8678-B-2-A
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-52-34
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be AttachedCertificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section X).
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Signed:Owner or Owner's Designee, Title
Dan Hoang
Senior Enaineer Date: -• .RCH 29, 1999
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspectea the
components described in this Owner's Report during the period /-,Z-9 i to .- Zt-5 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
z92�Ltd�Inspector's Sig~iatuc
Commissions: /,/ a2, , A..'.,,z ,4 A60Vr National Board, State, and Efidorsements
Sheet 2 of 2
Date: ý Z__-8 1991
Sheet 1 of 2
FORM NIS-2, OWNERt S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: March 20.1999
G&E Buildin!. P.O. Box 1475. Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-180
1650 Calvert Cliffs Parkway- Lusby. MD 20657-4702 MWO No: 2199800590 (addr=) P0o, job no-)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No:. N IA I Date-: NA
1650 Calvert Cliffs Parkway; Lusby. MD 20657-4702 Section XI Class: One (ad&r=)
4. Identification of System: System Number: L2 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: WSAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI U"tiized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed.. Summer 92 Ad.(1WE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
RquRepie, Code Name of Nam of Manufacturers National Other Year Replaced, or Stamped
Conomonent Manufacturer S'ial Number --Board No. Identification Built Replacemes (Yes or No)
____________________ a - -
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-52-38
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 1 1", (2)
information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number
of sheets is recorded at the top of this form.
HYDRAULIC GR]NNELL (CYL) N/A 2-52-38 N/A Replaced No SNUBBERS CORP. 91203758-8
(VB) 16241-56
HYDRAULIC GR]NNELL (CYL) N/A 2-52-38 1998 Replacement No SNUBBERS CORP. 80102861-44
(VB) 80102860-74I
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: NIA Expiration Date: N/A
Dan Hoang Signed: or Senior Engineer Date: March 20, 1999 rOwers Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /1/2- 59 to 3-fe - , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
n Commissions: A,/, 9 2__e A,,JZ a ,•, 7 Inspector's SignaturV National Board, State, and Endorsements
Date: ( 9 9
Sheet 2 of 2
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 10, 1999 (name)
G&E Buildine, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two (add=e)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-181 (name)
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702 MWO No: 2199800591 (addres) (POjobno.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No: NIA Exp Date:_N/A
1650 Calvert Cliffs Parkway; Imsby. MD 20657-4702 Section X) Class: One
4. Identification of System: System Number 52 System Name: Safety Iniection
5. (a) Applicable Construction Code and Class:I USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed.. Summer 92 Ad.0WVE/IWL)
6. Identification of Components Repaired or Riplaced, and Replacement Components: ASME
Reared, Code Name of Name of Manufacturers National Odher Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-52-43 N/A Replaced No SNUBBERS CORP. 72252902-159
(VB) 4873-2-A
HYDRAULIC GRlNNELL (CYL) N/A 2-52-43 1998 Replacement No SNUBBERS CORP. 72253902-54
(VB) 3207-2-A
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-52-43
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
1 _ Dan Hoang Signed: Senior Engineer Date: April 10, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/3 -l to ./_/,5 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
, 'L ?v d_•e•- Commissions: ,l' 67 Z.-,- A • /.,r Mb 61/7 Inspector's Signature National Board, State, and Endoriements
Date: Z ZS 199_/
Sheet i of 2
FORM NIS-2, OWNERWS REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner. Baltimore Gas Electric Company Date: March 29, 1999
G&E Building, P.O. Box 1475, Baltimore. MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-182 (name)
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 MWO No: 2199800592 (address) (PO. job no.)
3. Work Performed by: Baltimore Gas Electric. NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No: N/A Exp Date: N/A
1650 Calvert Cliffs Parkway: LMsby. MD 20657-4702 Section XI Class: One (addres)
4. Identification of System: System Number: 52 System Name: Safety Inlection
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repaire, Code Name of Name of Manufacturer National Other Year Replaced, or Sbtampc
Coporet Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-52-44 N/A Replaced No SNUBBERS CORP. 73345358-19
(VB) 9929B-2-A
HYDRAULIC GRINNELL (CYL) N/A 2-52-44 1999 Replacement No SNUBBERS CORP. 72237426-21
(VB) 6085-2-A
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-52-44
S. Tests Conducted: Hydrostatic: [I Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: ... Senior Engineer Date: March 29, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/-3 - -? to _- S-?9 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
,,. .. Commissions: A/& ,8 Z7. - Vz, A-7, Gd Inspector's Siatt-e National Board, State, and Enidorsements
Date: ( 2.: 199_
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section Xl
1. Owner: Baltimore Gas Electric Company Date: March 27, 1999 (name)
G&E Building, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two (address)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-183 (name)
1650 Calvert Cliffs Parkway; Lusby, MD 206574702 MWO No: 2199704500 (a.ddrs) (PO,.job no.)
3. Work Perfornied by: Baltimore Gas Electric, NED, CCNPPD Tye Code Symbol Stamp: NIA (name) Auhoriza6on No: NIA Exp Date:.N/A_
1650 Calvert Cliffs Parkway: Lusby. MD 206574702 Section X[ Class: One (address)
4. Identification of System: System Number L2 System Name: Safety Infection
5. (a) Applicable Construction Code and Class: USAS B31.1 1969 ED. thur 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IV/TIWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repaired. Code Name of Name of ManUfaCte National Othr Year Replaced, or Stamped
Components,, Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-52-46 N/A Replaced No SNUBBERS CORP. 73306121-204
(VB) 8040-B-2-A
HYDRAULIC GRINNELL (CYL) N/A 2-52-46 1998 Replacement No SNUBBERS CORP. 72252902-31
(VB) 6231B-2-A
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-5246
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: NIA Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
.'• -- • - l-Dan Hoang
Signed': ... Senior Engineer Date: March 27, 1999 Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period 1-1-91 - to - and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
)<t- ex.-.- Commissions: A/.: 8,•Z2- , A,, X- - ,IJ 54 Inspector's Signit'ure National Board, State, and En'dorsements
Date: a AA.ýX Z_8. 199.f
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section X1
1. Owner. Baltimore Gas Electric Company Date: March 27. 1999
G&E Building, P.O. Box 1475, Baltimore, MDi. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-184
1650 Calvert Cliffs Parkway; Lusby. MD 20657-4702 MWO No: 2199704516 (address) (PO, job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authodzation No: N/A Exp Date:3!
1650 Calvert Cliffs Parkway; Lusby. MD 20657-4702 Section XI Class: One (address)
4. Identification of System: System Number: 52 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 add.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IVVE/WIL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repaired. Code
Name of Name of Manufacturers National Other Year Replaced, or Stamped Co0mpont Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-52-50A N/A Replaced No
SNUBBERS CORP. 79404793-35;& (VB) 79398753-35yi
HYDRAULIC GRINNELL (CYL) N/A 2-52-50A 1999 Replacement No
SNUBBERS CORP. 79404793-55 (VB) 80102860-13
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-52-50A
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: El Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number
of sheets is recorded at the top of this form.
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan 1{oang Signed: -,7 " .4 Senior Enaineer Date: March 27, 1999 Owner or Owner's Designee, Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected
the
components described in this Owner's Report during the period / -/3 - P to 3 - - 7-9 ,and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
is rt•ature Commissions: /J8 96Z24,. AA/L•/ i- . • 4q,7 ctor' Signature National Board, State, and Endorsements
Date: _____ __ __ , 199._
•he•t 9 nf 9
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: March 27, 1999 (name)
G&E Building, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two (add=m)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-185
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 MWO No: 2199704507 (addre) . OOjob no.)
3. Work Performed by: Baltimore Gas Electric. NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No: NIA Exp Date: NIA
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 Section XI Class: One (addre)
4. Identification of System: System Number: §. System Name: Safety Iniection
5. (a) Applicable Construction Code and Class: USAS B31.1 1969 ED. thru 1971 ADD. (b) Applicable Edition Of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda
1992 Ed.. Summer 92 Ad.(IWEFIWL) 6. Identification of Components Repaired or Ikeplaced, and Replacement Components:
ASME SRepaired. Code Name of Name of Manufacurer National Other Year Replaced, or Stamped Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-52-54 N/A Replaced No SNUBBERS CORP. 73306121-222
(VB) 8044-B-2-A
HYDRAULIC GRINNELL (CYL) N/A 2-52-54 1998 Replacement No SNUBBERS CORP. 72252902-23
(VB) "6166-2-A
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER- 2-52-54
8. Tests Conducted: Hydrostatic: 0 Pneumatic: [I Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify, that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: . Senior Engineer Date: March 27, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period / I 73 -? to 3 - 2 7 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASMIE Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor I I employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected wvith this inspection.
4ý4 ýo Commissions: 4,Z3 72.'_1-/•N1A /-n o 76S' Inspect ture National Board, State, and Endorsements
Date: AP,;1 /..-- 199 ?
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: March 23. 1998 (m)
G&E Building. P.O. Box 1475. Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&RNo: 98-2-189 (nm~e)
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 MWO No: 2199704506 (addrew) (Po, job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: N (name) AuthorizationNo:JK/A Exp Date: N/A
1650 Calvert Cliffs Parkway: Lusby, MD 206574702 Section XI Class: Two (,dd-e)
4. Identification of System: System Number: 60 System Name: Primary Containment Heaters
5. (a) Applicable Construction Code and Class: .WSAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for RepairReplacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
- •RVepa- Code Name of Name of Manufacturen National Other Year Replaced, or Stamped Component Manufacturer Serial Number BoardNo. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-60-12 N/A Replaced No SNUBBERS CORP. 73345358-3
(EB) 8613B-I-SP
HYDRAULIC GRINNELL (CYL) N/A 2-60-12 1998 Replacement No SNUBBERS CORP. 73355668-222
(VB) 9652B-I-SP
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-60-12
S. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: NIA psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No. N/A Expiration Date: N/A
Dan 1-bang Signed:Senior Enineer Date: March 23, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-1S -1 '3 to :3-0- 7 ,and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
-________ _ors ____ _____re_ Commissions: A/S&Z_7., A,-. Xz- ge,j&-7 inspector's sign ~re National Board, State, and Endorsements
Date: 62• 06 199 1- I d
Sheet 2 of 2
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Companmy Date: April 1. 1999 (name)
G&E Buildine, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-191
1650 Calvert Cliffs Parkway: L4sbv- MD 20657-4702 MWO No: 2199800593 (addres) (PO.job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD . Type Code Symbol Stamp: N/A (name) AuthoanonNo:JIA_ Exp Date: /&
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 Section 3I CfAs: Two
4. Identification of System: System Number: 61 System Name: Containment Spray
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ;ASME
Repaired, Code Name of Name of Manufacturer National Other Year Replaced, or Stamped Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) , NIA 2-61-3 N/A Replaced No SNUBBERS CORP. 73355668-124
(VB) 9422B-1-SP
HYDRAULIC GRINNELL (CYL) N/A 2-61-3 1998 Replacement No SNUBBERS CORP. 73355668-427
(VB) 9854B-I-SP
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-61-3
8. Tests Conducted: Hydrostatic: 0l Pneumatic: 0l Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
/ -- Dan Hoang Signed: . Senior Engineer Date: April 1, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/3J- 7 to 3-Z.-?9 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
A• 4ixu •/tz-C-- Commissions: /J& Z2-Af.. ,/, Inspector's Signatule National Board, State, and E-•dorsemnents
Date: e62_ ze 1199 ?"
• C
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner Baltimore Gas Electric Company Date: April 10, 1999 -(name)
G&E Buildine, P.O. Box 1475, Baltimore.-MD. 21203, Unit Two (,ddrem)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-192 (name)
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 MWO No: 2199800595 (addre) (POMjob no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Sy-bol Stamp: NIA (name) Authorization No: N/A .Exp Date: N/A
1650 Calvert Cliffs Parkway; Lusby. MD 20657-4702 Section XI Class: Two (addres•)
4. Identification of System: System Number 61 System Name: Containment Spray
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
RPepad Code Name of Name of Manufacturers National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-61-4 N/A Replaced No SNUBBERS CORP. 73345358-78
(VB) 8755B-1-SP
HYDRAULIC GRINNELL (CYL) N/A 2-61-4 1999 Replacement No SNUBBERS CORP. 79404793-61
(VB) 79398753-202
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-61-4
8. Tests Conducted: Hydrostatic:. 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 1 1", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2 FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: S•tnioEngineer Date: April 10, 1999 or Owner's Designee, Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected
the
components described in this Owner's Report during the period /-/3 - 9 - to . - j, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASMIE Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
./4•&t)/- Commissions: AV, Z_, ,.f ,,42) Y,'7 Inspector's Signatur., National Board, State, and Endorsements
Date: 6•/ A __, 1999
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: March 29, 1999 (name)
G&E Building. P.O. Box 1475, Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-193 (name)
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 MWO No: 2199704489 (ad&ress) (O, job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No:_N/A Exp Date: N/A
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702 Section XM Class: Two
4. Identification of System: System Number: 63 System Name: Steam Generator Blowdown
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XM Utilized for Repairs/Replacements: 1983 Edition. Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repafiv Code Name of Name of Manufacturer National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-63-2 N/A Replaced No SNUBBERS CORP. 79404794-46
(VB) 80102860-15
HYDRAULC GRWNNELL (CYL) N/A 2-63-2 1998 Replacement No SNUBBERS CORP. 79404793-56
(VB) 80102860-7
7. Description of Work:
PERFORMvED PREVENTIVE MAINTENANCE ON SNUBBER.L 2-63-2
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: - ' Senior Engineer Date: March 29, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel
Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period 1-/' -439 to 3-Z3- 5 j , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied,
concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
____.____ .______-__ _ Commissions:- / A'aa4 A/:," ,n2 e'. <7 Inspector's Signa ure National Board, State, and Etdorsements
Date: 6 .30.. 1997
Sheet I of 2
FORM NIS-2, OWNERWS REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company (name)
G&E Buildin!, P.O. Box 1475, Baltimore, MD, 21203 (addre)
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702
3. Work Performed by: Baltimore Gas Electric, NED, CCI
(1,me) 1650 Calvert Cliffs Parkway Imsby MDII 20657-4702
Date: April 3, 1999
Unit: Two
R&R No: 98-2-194
MWO No: 2199704437. . (PO. job no.)
ID Type Code Symbol Stamp: NIA Authorization No:• f Exp Dae: NIA
Section Xl Class: Two(addre-)
4. Identification of System: System Number: 63 System Name: Steam Generator
5. (a) Applicable Construction Code and Class: CE 8067-487-503
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWEfIfVL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASI
Repaired, Co, Nat6e of Name of Manufacturers National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or N4
AE Ic
HYDRAUUC GRONELL (CYL) N/A 2-63-19 N/A Replaced No SNUBBERS CORP. 33156120-9
(VB) VB- IVB-24
HYDRAUIC GRINNELL (CYL) •,,, /A 2-63-19 1998 Replacement No SNUBBERS CORP. 33156120-•,3
(VB) VB-26/VB-36.
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-63-19
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
-N
Sheet 2 of 2 FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G3, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
> -Dan Hoang Signed: . -,, Senior Engineer Date: April 3. 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/&- ' to 3- 26-9'7 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
)�� � )/ z ' - Commissions: A,/f "Z_ K7A 4,z ,, (z 9? Inspector's Signatu/e National Board, State, and Endo'rsements
Date: 5- 199__ (7
; l
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Reauired By the Provisions of the ASME Code Section Xl
1. Owner: Baltimore Gas Electric Company
(name)
G&E Building, P.O. Box 1475, Baltimore, MD. 21203
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702
3. Work Performed by: Baltimore Gas Electric, NED, CCNPI
(name)
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702
Date: April 3, 1999
Unit: Two
R&R No: 98-2-195
MWO No: 2199704492 (PO, job no.)
ID Type Code Symbol Stamp: NA Authorization No: N/A Exp Date: K/
Section XI Class: Two(addres)
4. Identification of System: System Number 63 System Name: Steam Generator
-5. (a) Applicable Construction Code and Class: CE 8067-487-503
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASI
Repaired, C"
Name of Name of Manufacturers National Other Year Replaced, or Stamped Comoonent Manufacturer Serial Number Board No. Identification Built Replacement (Yes or Ni
dE
HYDRAULIC GRINNELL (CYL) N/A 2-63-24 N/A Replaced No SNUBBERS CORP. 33156120-38
(VB) ZB-19/ZB-20
HYDRAULIC GRINNELL (CYL) N/A 2-63-24 1999 Replacem.ent No SNUBBERS CORP. 92216861-1
(VB) 16219-4 16219-9
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER. 2-63-24
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of fists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x I 1", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G3, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
- Dan Hoang Signed: Senior Engineer Date: April 3, 1999 -imer or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/3? - to - ,and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
Commissions: , /fZ-$4 7 Inspecior's ignat re National Board, State, and Efddorsements
Date: cZ4_ 199j
Sheet 2 of 2
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company (name)
G&E Bulldine, P.O. Box 1475. Baltimore. MD. 21203
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusbv. MD 20657-4702
3. Work Performed by: Baltimore Gas Electric, NED, CCNPI
(name).
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702
Date: April 3, 1999
Unit: Two
R&R No: 98-2-196
MWO No: 2199704497 (PO. job no.)
D Type Code Symbol Stamp: N. A
Authorization No: N/A Eq Date: K/A
Section XI Class: Two
4. Identification of System: System Number. 63 System Name: Steam Generator
5. (a) Applicable Construction Code and Class: CE 8067-487-503
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(RW/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASl%
Repaired, Co& Name of Name of Manufaclure National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or Nc
4E le
HYDRAULIC GRINNEML (CYL) NIA 2-63-25 N/A Replaced No SNUBBERS CORP. 33156120-42
(VB) ZB-6/ZB-15
HYDRAULIC GRINNELL (CYL) N/A 2-63-25 1999 Replacement No SNUBBERS CORP. 33156120-47
(VB) ZB-lfZB-4
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER. 2-63-25
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets inform of lists, sketches, or drawings maybe used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G3, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
"Dan Hoang Signed: . Senior Engineer Date: April 3. 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/5- '7 to -'3 ,, ,and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
________ ______ -"______ Commissions: A18 •Z Z, AAJ" 143 e5el "Inspector's Sigfaurej National Board, State, and Endorsements
Date: (2"C _ ,o,• - '36- 199 9
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Reouired By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company (Mame)
G&E Buildinz, P.O. Box 1475, Baltimore, MD, 21203
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, MD 120657-4702
3. Work Performed by: Baltimore Gas Electric, NED, CCNP1 (name)
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702
Date: March 31, 1999
Unit: Two
R&R No: 98-2-197
MWO No: 2199800596 (PO, job no.)
PD Type Code Symbol Stamp: NA Authorization No: NIA Eiq Date:J1N/A
Section XI Class: Two(ad&=u)
4. Identification of System: System Number 63 System Name: Steam Generator
5. (a) Applicable Construction Code and Class: CE 8067487-503
(b) Applicable Edition of Section X3 Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: AS•
Reired, CAN Name of Name of Manufcturs National Other Year Replaced, or Stamped
Conmoonent Manufacturer Serial Number Board No. Identification Built Replacement (Yes or N4
AE
HYDRAULIC GRINNELL (CYL) NIA 2-63-26 NIA Replaced No SNUBBERS CORP. XAAG9443
001 (VB) C1018-879
HYDRAULIC GRINNELL (CYL) N/A 2-63-26 1999 Replacement No SNUBBERS CORP. 33156120-36
(VB) ZB-24fZB-25
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-63-26
8. Tests Conducted: Hydrostatic: I- Pneumatic: 0 Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 1 1", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G3, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
/ •Dan Hoang Signed: . , . Senior Engineer Date: March 31, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/3 -9'? to 3-3 -- , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
Commissions: 7&2..-3..7A-, /e,,,JA ,"Z 76,,• Inspecto~r'sSi re National Board, State, and Endorsements
Date: ,, ellt /Y 1199 _
*
Sheet I of 2 P
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 10. 1999
G&E Building, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-198
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 fWO No: 2199704508 (address) (PO, job no.)
3. Work Performed by: Baltimore Gas Electric. NED, CCNPPD Type Code Symbol Stamp: MIA (name) Authorizafion No: N/A * Exp Date:NI
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702 Section M Class: One (address)
4. Identification of System: System Number 64 System Name: Reactor Coolant 5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda
1992 Ed., Summer 92 Ad.(IWE•/WL) 6. Identification of Components Repaired or Replaced, and Replacement Components:
ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, or Stamped Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYI) N/A 2-64-9 N/A Replaced No SNUBBERS CORP. 73326235-49
(VB) 8300B-1-SP
HYDRAULIC GRINNELL (CYL) N/A 2-64-9 1998 Replacement No SNUBBERS CORP. C-98-10-01
(VB) 9126B-l-SP
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-64-9
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: E]
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
L
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: -- Senior Engineer Date: April 10, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /*/'/ 9 to - and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
-~ 4' Commissions: A1,B 8 ~Z4 C, z . , /7t Inspector's Signa ure National Board, State, and Encdorsements
Date: -._,0 199.I I
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section Xl
1. Owner: Baltimore Gas Electric Company Date: April 9, 1999 (name)
G&E Buildinz. P.O. Box 1475, Baltimore, MD. 21203 Unit: Two (address)
2. Plant: Calvert Cliffs Nuclear Power Plant R&,R No: 98-2-199 (name)
1650 Calvert Cliffs Parkway: Luasby MD 20657-4702 MWO No: 2199704505 (address) (P0. job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: /... (name) Authorization No:. N ..A Exp Date: NIA
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 Section XI Class: One,
4. Identification of System: System Number: 64 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: TSAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed.. Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repaimd Code Name of Name of Manufacturers National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYI) N/A 2-64-12 N/A Replaced No SNUBBERS CORP. 73345358-59
(VB) 8614B-I-SP
HYDRAULIC GRINNELL (CYL) N/A 2-64-12 1999 Replacement No SNUBBERS CORP. 74402396-163
(VB) 10168B-1-SP
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER. 2-64-12
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: ]
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
-------- Dan Hoang
Signed: Senior Engineer Date: April 9. 1999 "e-Orfo" or wner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-41- ?5 to - and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
z, / r•(, Commissions: AIR 6z ,, . j r- 4,b 6(3/7 Inspector's Signaturg/ - National Board, State, and Endcforsements
Date: 6,.- 199•/
t +
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 9. 1999 (name)
G&E Building, P.O. Box 1475, Baltimore. MD. 21203 Unit: Two (address)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-200 (name)
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 MWO No: 2199800597 (address) (PO, job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No: J/A Exp Date: N/A
1650 Calvert Cliffs Parkway; Lusby. MD 20657-4702 Section XI Class: One (address)
4. Identification of System: System Number: 64 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: USAS 1331.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed.. Summer 92 Ad.(IWE/IVLý)
6. Identification of Components Repaired or Rleplaced, and Replacement Components: ASME
Repaired, Code Name of Name of Manufacturers National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-64-12A N/A Replaced No SNUBBERS CORP. 74402396-178
(VB) 10281B-1-SP
HYDRAULIC GRINNELL (CYL) N/A 2-64-12A 1997 Replacement No SNUBBERS CORP. 73326235-87
(VB) 8269B-1-SP
7. Description of Work:
PERFORMAED PREVENTIVE MAINTENANCE ON SNUBBER: 2-64-12A
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: [3
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 1 1", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: Senior Engineer Date: April 9, 1999
tTwner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-A/-99 to 4-8-9 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
- Commissions: Inspector's Signat-ure National Board, State, and Endo'ernents
Date: . & 199/
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section Xl
1. Owner: Baltimore Gas Electric Company Date: March 20, 1999 (name)
G&E Buildina, P.A. Box 1475, Baltimore, MD. 21203 Unit: Two (addres)
.2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-277#1 (name)
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 MWO No: 2199704498 (addrnss) , (PO, job no.)
3. Work Performed by: Baltimore Gas Electric. NED. CCNPPD Type Code Symbol Stamp: IA_ (uname) Authozation No: NIA Exp Date: NA/
1650 Calvert Cliffs Parkway: Lusby, MD 206574702 Section XI Class- One (,ddr=)
4. Identification of System: System Number: 64 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: USAS B31.7 1969ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(TWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repaired Code Name of Name of Manufacturer National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAUUC GRINNELL (CYL) N/A 2-64-15 N/A Replaced No SNUBBERS CORP. 73355668-223
(VB) 98S3B-A-SP
HYDRAUUC GRINNELL (CYL) N/A 2-64-15 1999 Replacement No SNUBBERS CORP. 73326235-90
(VB) 8375B-1-SP
7. Description of Work:
PERFORMED PREVENTIVE MAINIENANCE ON SNUBBER. 2-64-15
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: [
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 1 1", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME C6de, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
"Siged **•*.€Dan Hoang
Signed: Senior Engineer Date: March 20, 1999 "Order or Owner'sbesignee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period _ ., to - , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section Xl.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
_ _ _ _ _11A )-:2e Commissions: 4S/eZZ4 •.'. ,M,0(C/?47 S- Inspecto 'ss•turl National Board, State, and 'Endorsements
Date: t -.30. 19991If
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 12. 1999 (name)
G&E Buildin!. P.O. Box 1475, Baltimore, MD. 21203 Unit: Two (addr=)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-202 (name)
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702 MWO No: 2199704495 (addres) (P.O job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code S3mbol Stamp: N/A (name) Authorization No:_NIA Exp Date: N/A
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702 Section XI Class: One (addrew)
4. Identification of System: System Number: 64 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repaire, Code Name of Name of Manufacturers National Other Year Replace or Stmped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINN-ELL (CYL) NIA 2-64-18 N/A Replaced No SNUBBERS CORP. 73326235-98
(VE) 8492B-1-SP
HYDRAULIC GRINNELL (CYL) N/A 2-64-18 1998 Replacement No SNUBBERS CORP. 73355668-436
(VB) 6400B-2-A
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-64-18
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XU.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Signed: Senior Engineer Date: April 12, 1999 Owner or Oýer's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/J-'E to -t,-2I, and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
__ __ __ __ _ __ __ __ __ _ Commissions: AB6Zr•,t:ý A.4r A44 G'"
Inspector's Sigh'tre/ National Board, State, and Endorsements
Date: ("42 ,30. 1999I
! , ' I/".
Sheet of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner Baltimore Gas Electric Company Date: April 10, 1999 (DAme)
G&E Building, P.O. Boz 1475, Baltimore. MD. 21203 Unit: Dvo
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-203 (amie)
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 MWONo: 2199704512 (ad&=) (P0O.job nm)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stam: NIA (nae)Authorization No: h... Exq, Datej._fA
1650 Calvert Cliffs Parkway; Lusby. MD 20657-4702 Section XI Class: One (a )
4. Identification of System: System Number 64 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(MTE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repar4 Cede Name of Name of Manufa•eurers Natonlal Other Year Replaced, or Stamped
Ckmvonent Manufacturer Serial Number Board No. Iderdification Built Replacement (Yes or No)
HYDRAULIC GR1NNELL (CYL) NIA 2-64-19 N/A Replaced No SNUBBERS CORP. 79404793-58
(VB) 80102860-3
HYDRAULIC GRINNELL (CYL) N/A 2-64-19 1999 Replacement No SNUBBERS CORP. 79404793-5
(VB) 80102860-17
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER. 2-64-19
8. Tests Conducted: Hydrostatic: [" Pneumatic: " Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
FORM NIS-2, (Back)
(.2
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be AttachedCertificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A E
Signed::1nZ/I/,Senior Engin-,r
-Owver Owner's Designee, Title
xpiration Date: N/A
Dan HoangDate: April 10, 1999
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/'-5 i to -3-277 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
Inspector's Sigature/Commissions: AI80ZZ6. A A -J_ /1'7)(,/7
National Board, State, and Endo~seýmnts
Date: 12 "O9 199'$
Sheet 2 of 2
,;;ý , 6--tZeLd-f-
.,.)
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: March 29, 1999 (name)
G&E Building, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-204
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 MWO No: 2199800598 (address) (POjob no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: N/Af& (name) Authorization No: NIA_ Exp Date:-EA/
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702 Section XI Class: One (address)
4. Identification of System: System Number: 64 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: USAS E31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(1WE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repaired, Code Name of Name of Manufacturers, National Other Year Replaced, or Stamped Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRNNELL (CYL) N/A 2-64-25 NIA Replaced No SNUBBERS CORP. 79404793-7
(VB) 80102860-11
HYDRAULIC GRINNELL (CYL) N/A 2-64-25 1999 Replacement No SNUBBERS CORP. 74400328-140
(VB) 9975-B-l-SP
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-64-25
8. Tests Conducted: Hydrostatic: 0 Pneumatic: [] Nominal Operating Pressure: 0 Pressure: NIA psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets inform of lists, sketches, or drawings maybe used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASN1E Code, Section MI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
_ .Dan Hoang Signed. Senior Engineer Date: March 29, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/'/- 9? to 3-Z-9-'7 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
- Commissions: A/A 8RZ... A'.Jr, A12) 6-17" SInspector's'S'•gna/ure National Board, State, and Endorsements
Date: (2,qh,-V Z- 199ci
-4
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 10. 1999 (mue)
G&E Building, P.O. Box 1475. Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-205
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 MWO No: 2199704494 (addres) (P0jobno.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: NA (name) Authorization No:. N/A Eq Date: NIA
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 Section XI Class: One
4. Identification of System: System Number: 64 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed.. Summer 92 Ad.(IWE/1WL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repaired, Code Name of Name of Manufacturers National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement __(Yes or No)
HYDRAUUC GRINNELL (CYL) N/A 2-64-26 N/A Replaced No SNUBBERS CORP. 79404793-59
(VB) 80102860-10
HYDRAULC GRINNELL (CYL) N/A 2-64-26 1998 Replacement No SNUBBERS CORP. 79404793-60
(VB) 79398753-451
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-64-26
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: . Senior Engineer Date: April 10, 1999
Owner or Owner's Designee, Title
Certificate of Insenice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /9/?- 95 to 2- Z_9 - 9' , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
,z 7<A, ,<9-- Commissions: Ai_ ? A 7 -,z ,r_ 4 r./ 7' Inspector's Signature National Board, State, and End<rsements
Date: _- .30_ 199_3/
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Reauired By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 9. 1999
G&E Building. P.O. Box 1475, Baltimore, MD. 21203 Unit: Two (Addres)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-206 (name)
1650 Calvert Cliffs Parkway; Lusby. MD 20657-4702 MWO No: 2199704509 (address) (P0, job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: NIA
(name) Authorization No: NA_ Exp Date: /NIA
1650 Calvert Cliffs Parkway- Lusby. MD 20657-4702 Section XI Class: One (address)
4. Identification of System: System Number: 64 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: WSAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME Repaired, Code
Name of Name of Manufacturers National Other Year Replaced, or Stamped
Component Manufacturer Seria Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-64-27 NIA Replaced No
SNUBBERS CORP. 73355668-231 (VB) 9979B-1-SP
HYDRAULIC GRJNNELL (CYL) N/A 2-64-27 1999 Replacement No
SNUBBERS CORP. 73355668-221 (VB) 9980B-1-SP
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-64-27
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0l Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: NIA Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2)
information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number
of sheets is recorded at the top of this form.
---
Sheet 2 of 2 FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASMIE Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: /A Expiration Date: N/A
/ Dan Hoang Signed: a I Senior Engineer Date: April 9, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/, 11 to / and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
npetos Signaur'f Commissions: ,</B62-6 A,-LZr, A4•6 6 ',--7 Inspector's Signaur National Board, State, and Endorsements
Date: 37"Q 199_
ii
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 10, 1999
G&E Bulidine. P.O. Box 1475, Baltimorem MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-207 (namne)
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702 MWO.No: 2199704490 (addrus) (P0, job mo)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: NA
(naum) Autd zation No:JL M .xp Eq k: NfA
1650 Calvert Cliffs Parkwar; Lusby, MD 20657-4702 Section XI Class: One (addr=s)
4. Identification of System: System Number. L4 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for RepairsfReplacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
lepafr4 Code
Name of Name of Manfur Naional Other Year Replawed, or Stamped
Component Manufacture Serial Number Board No. WIdetfication Built Replacement (Yes or No)
HYDRAULIC GRDRNEML (CYL) N/A 2-64-28A N/A Replaced NO
SNUBBERS CORP. 74402396-66 (VB) 10165B-l-SP
HYDRAULIC GRINNELL (CYL) N/A 2-64-28A 1997 Replacement No
SNUBBERS CORP. 74402396-176 (VB) 8549-1-SP
7. Description of Work:
PERFORMED PREVENTIVE MAINT ANCE ON SNUBBER: 2-64-28A
8. Tests Conducted: Hydrostatic: 0 Pneumatic: [ Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 9-1/2"x, 11", (2)
information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number
of sheets is recorded at the top of this form.
Sheet 2 of 2 FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: Senior Engineer Date: April 10, 1999 er'sDesignee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period ./-/V{/- g to - and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
- Commissions: ,JA.z,..e. AAj Z. A 1.,) 4e467 ns-tors signatu National Board, State, and Endorshnents
Date: T o . .30 199 1
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: March 20, 1999
G&E Buhldinz, P.O. Box 1475. Baltimore, MD. 21203 Unit: Two (address)
2. Plant: Calvert Cliffs Nuclear Power Plant - R&R No: 98-2-208 (name)
1650 Calvert Cliffs Parkway. Lusby, MD 20657-4702 MWO No: 2199800599 (address) (PO.job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: NIA (name) AuodzationiNo: NIA! * Exp Date e:NA
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 Section XI Class: One (address)
4. Identification of System: System Number: 64 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for RepairsReplacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(MWET/WL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Rqnir4 Code Name of Name of Manufacturers National Ocher Year Replaced, or Stampnd Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-64-30 N/A Replaced No SNUBBERS CORP. 74462697-247
(VB) 10489B-2-A
IHYDAULIC GRNELL (CYL) N/A 2-64-30 1998 Replacement No SNUBBERS CORP. 73345359-21
(VB) 9924B-2-A
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-64-30
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: Senior Engineer Date: March 20, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/. V- S to 3- /5- 7 ' ,and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
______,.___,_,._______-.. Commissions: AA .z4A, z., o2,4,7
Inspector's Signaturl National Board, State, and'Endorsements
Date: K1L -k" Y ZA 1999-- ,
V
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: March 20. 1999 (name)
G&E Building) P.O. Box 1475. Baltimore, MD, 21203 Unit: Two (addrew)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-209 (name)
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 MWO No: 2199800600 (add=) (, jobno)
3. Work Performed by: Baltimore Gas Electric. NED, CCNPPD Type Code S3mbol Stamp: N/A (name) Authorization No: N/A Exp Date: N/A
1650 Calvert Cliffs Parkway- Lusby, MD 206574702 Section XI Class: One (address)
4. Identification of System: System Number: 64 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XM Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(1WE/IWL)
6. Identification of Components Repaired or Rplaced, and Replacement Components: ASME
Repaired,. Code Name of Name of Manufacturers National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) NIA 2-64-30A N/A Replaced No SNUBBERS CORP. 75503198-94
(VB) 80511048-15
HYDRAULIC GRINNELL (CYI) N/A 2-64-30A 1996 Replacement No SNUBBERS CORP. 75593196-92
(VB) B2556-A2D7IC
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-46-30A
8. Tests Conducted: Hydrostatic:-[] Pneumatic: 0 Nominal Operating Pressure: Li
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the
rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang
Signed: Senior Engineer Date: March 20, 1999 Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel
Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-"9?7 to 3 -3 ?- ,and state to the
best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this
Ownmer's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the
Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected wvith this inspection.
ComIaissions:AJt 7oadStt/eA Endo 7&,67 lnsP7 atureNational Board, State, and Endorsements
199__Date: A/ajfl"ý 1Yi
0 T
Sheqt I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: mARCH 29. 1999 S~(name)
G&E Buildinz, P.O. Box 1475, Baltimore, MD. 21203 Unit: tWO (address)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-210 (name)
1650 Calvert Cliffs Parkway; Lusby. MD 20657.4702 MWO No: 2199704518 (address) (PO. job no.)
3. Work Performed by: Baltimore Gas Elictric, NED, CCNPPD Type Code Symbol Stamp: .. A (name) Authorization No: N/A Exp Date: N/A
1650 Calvert Cliffs Parkway: Lusby, MD 206574702 Section XI Class: oNE (address)
4. Identification of System: System Number: 64 System Name: Reactor Cooling
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed.. Summer 92 Ad.C"WE/1*VL)
6. Identification of Componcnts Repaired or Replaced, and Replacement Components: ASME
Repaired, Code Name of Name of Manufacturers National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-64-38 NIA Replaced No SNUBBERS CORP. 74402397-203
(VB) 10446B-2-A
HYDRAULIC GR]NNELL (CYL) N/A 2-64-38 1998 Replacement No SNUBBERS CORP. 73326236-76
(VB) "9389-B-l-SP
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-64-38
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 01 Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: ___._ ' .... _ Senior Engineer Date: March 29. 1999
/ Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period//' - ? to -3 -9 ? ,and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
Commissions: AW 7".r-Y /11A "7') 76 " Inspecs ature National Board, State, and Endorsements
Date: A ;RI'• ; •' - 199_
Sheet~ of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 10, 1999
G&E Building, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-211 (came)
1650 Calvert Cliffs Parkway- Lusby, MD 20657-4702 MWO No: 2199704513 (add=ss) -(POjob o.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: 21A (name) Auization No:._&A. E3 Daft:NIA
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702 Section XI Class: Two (addres)
4. Identification of System: System Number L3 System Name: Main Steam
5. (a) Applicable Construction Code and Class: USAS B31.1 1967 ED. thru 1972 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWLI
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Rxhvdý Code Name of Nane of Manufactumr National Other Year Replaced, or Stamped
Component Manufacturer Serial Number BoardNo. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNEJL (CYL) N/A 2-83-34 N/A Replaced No SNUBBERS CORP. 88101085-5
(VB) 8912442-3
HYDRAULIC GRIRNELL (CYL) N/A 2-43-34 1999 Replacement No SNUBBERS CORP. 86340253-7
(VB) 2292-A2
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER. 2-83-34
8. Tests Conducted: Hydrostatic: 0 Pneumatic: ' Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided: (1) size is 8-1/2"x 11", (2)
information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number
of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed Senior Engineer Date: April 10, 1999 S" " '•Owner or Owner's Designee, Title
Certificate of Insernice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period ___ _ to and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
); • .. , o-..--Commissions: AI/4 8 Z Z ( ,, A ,A4•M) 7 "Inspector's Signattre! National Board, State, and End~CmCets
Date: . 1999
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 28. 1999 (name)
G&E Building, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-212 (name)
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 MWO No: 2199704519 (address) (P0, job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No: N/A Exp Date: N/A
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702 Section XI Class: One (address)
4. Identification of System: System Number 64 System Name: Reactor Coolant
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 EDD. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition. Summer 83 Addenda 1992 Ed., Summer 92 Ad.X E )
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repare, Code Name of Name of Manufacturers National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-64-43 N/A Replaced No SNUBBERS CORP. 87392610
(VB) KY024D58-A4
HYDRAULIC GRINNELL (CYL) N/A 2-64-43 1999 Replacement No SNUBBERS CORP. 78309511-1
(VB) 77244537-112
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-64-43
8. Tests Conducted: Hydrostatic: El Pneumatic: 0 Nominal Operating Pressure: E]
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
S.Dan Hoang Signed: - .. . - Senior Engineer Date: April 28, 1999Owner or Owner s Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/'-t"-'5? to -. 7- 'P , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concernig the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
- "Ipector'sSin'ture Commissions: ,//98 0Z 2c.' A/- /P70) 64'7
Inspector' Signature) National Board, State, and Endorsements
Date: / 199'f
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section Xl
1. Owner. Baltimore Gas Electric Company Date: April 10, 1999 (name)
G&E Buildint. P.O. Bor 1475. Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-213 (name)
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 MWO No: 2199704517 (aress) 0M job Do.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: NIA (nme) •Azthbzaton No:_L N . Exp Date._NA.
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 Section XI Class: Two (addre=)
4. Identification of System: System Number. 83 System Name: Main Steam
5. (a) Applicable Construction Code and Class: USAS B31.1 1967 ED. thru 1972 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.RWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
a Code Name of Name of Manufacue=s Na.ic 00W Year Replaced, or Staned
C nent Manufacturer Serial Number Board No. Identifiation Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-43-33 N/A Replaced No SNUBBERS CORP. 88101085-10
(VB) 8912442-29
HYDRAULIC GRINNELL (CYL) N/A 2-43-33 1999 Replacement No SNUBBERS CORP. 81134402-10
(VB) 54670.012ZB127
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-43-33
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure:
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x Ir1, (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2 FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: Senior Engineer Date: April 10, 1999
or owner's Designee. Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/W/ " ' to 4-9? ? and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
e!ýJ 624AtL-,- Commissions: ld'gpZ26 A,-)r M Z e, 17 "Inspector's Signature I National Board, State, and Endorsements
Date: .c) 199,3I
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 16, 1999 (name)
G&E Buildint, P.O. Box 1475, Baltimore. MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-214 (name)
1650 Calvert Cliffs Parkway, Lusby, MD 20657-4702 MWO No: 2199800633 (address) (Pjob no.)
3. Work Performed by: Baltimore Gas Electric. NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No: N/A ExpDate: NIA
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 Section XI Class: Two
4. Identification of System: System Number. 83 System Name: Main Steam
5. (a) Applicable Construction Code and Class: USAS B31.1 1967 ED. thru 1972 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or keplaced, and Replacement Components: ASME
Repaired, Code Name of Name of Manufactureh National Other Year Replaced, or Stamped "
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
I I. & � &
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-83-16A
8. Tests Conducted: Hydrostatic: [I Pneumatic: 0 Nominal Operating Pressure: E]
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings maybe used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
HYDRAULIC GR]NNELL (CYL) NIA 2-83-16A N/A Replaced No SNUBBERS CORP. 86350052-14
(V) 86342149-100
HYDRAUUC GRINNELL (CYL) N/A 2-84-16A 1999 Replacement No SNUBBERS CORP. 79404806-30
(VB) B2264-A2
I I
Sheet 2 of 2FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Signed:Dan Hoang Signed: -' , Senior Engineer Date: April 16, 1999 Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-//'--79 to ,__-/_-___ , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
,,•/+1 ,• Commissions: Ee Z2<,c A.iZ- /;1Z) 65$/7 Inspector's Signa•ure National Board, State, and Endorsements
Date: lZg. 199j/
4*
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section Xi
1. Owner: Baltimore Gas Electric Company Date: April 14. 1999 (namc)
G&E Buildinf. P.O. Box 1475, Baltimore, MD, 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-215 (name)
1650 Calvert Cliffs Parkway; Lusby. MD 20657-4702 MWO No: 2199800602 (address) (PO. job no.)
3. Work Performed by: Baltimore Gas Electric. NED, CCNPPD Type Code Symbol Stamp: N/ (name) Authorization No: NIA Exp Daft: NA
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 Section XI Class: Two
4. Identification of System: System Number: 83 System Name: Main Steam
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD. (b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda
1992 Ed.. Summer 92 Ad.(IWE/T .L) 6. Identification of Components Repaired or Replaced, and Replacement Components:
ASME Repaired, Code Name of Name of Manufacturers National Other Year Replaced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAUUC GRINNELL (CYL) . N/A 2-83-2A N/A Replaced No SNUBBERS CORP. 79318146-7
(VB) 79371872-263
HYDRAULIC GRINNELL (CYL) N/A 2-83-2A 1998 Replacement No SNUBBERS CORP. 79437626-7 (VB)
79398754-176
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-83-2A
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0] Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
/ Dan Hoang Signed: - Senior Engineer Date: April 14, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period 1-/ 9'-? c] to •L.' 14 and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASMIE Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
'& ~& Y ~ J £2~Y~A/!X~- Commi~ssions: 1JZ3&a2-4,AAJZ Inspector's Signature National Board, State, and End~rsements
Date: C? 1993-F---- -.
Sheet I of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section X1
1. Owner: Baltimore Gas Electric Company Date: April 12, 1999 (name)
G&E Building, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-216 (name)
1650 Calvert Cliffs Parkway; Lusby, MD 20657-4702 MWO No: 2199800603 (addres) ,(POjob no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No: N/A Exp Date: N/A
1650 Calvert Cliffs Parkway: Lusby, MD 20657-4702 Section XI Class: Two
4. Identification of System: System Number: 83 System Name: Main Steam
5. (a).Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XM Utilized for Repairs/Replacements: 1983 Edition. Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Replaced, and Replacement Components: ASME
Repaired, Code Name of Name of Manufacturers National Other Year Replaced, or Stamped
Compoment Manufacturer Serial Number Board No. Identification Built R lacment (Yes or No)
7. Description of Work:
PERFORNM PREVENTWE MAINTENANCE ON SNUBBER: 2-43-3
8. Tests Conducted: Hydrostatic- 0 Pneumatic: 0 Nominal Operating Pressure: 0
Pressure: N/A psi. Test Temperature: N/A Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2)
information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
HYDRAULIC GRINNELL (CYL) N/A 2-43-3 NIA Replaced No SNUBBERS CORP. 78318146-9
(VB)+ V5128-2
HYDRAULIC GRINNELL (CYL) N/A 2-83-3 1994 Replacement No SNUBBERS CORP. 81134402-1
(VB) 79398754-333
FORM NIS-2, (Back)
()Sheet 2 of 2
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be AttachedCertificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A
Signed:Owner or Owner's Designee, Title
Expiration Date: N/A
Dan Hoang
Senior Fnoinc�r Date: April 12, 1999
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/ 5--?9 to -7-1 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
Inspector's Signaiure/
Date: - 204A / Zd,. 1999
Commissions: AR, Z.Z A.'... 61 (,-7 National Board, State, and Endorsements
r
L.
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: April 16, 1999 (name)
G&E Building, P.O. Box 1475, Baltimore, MD. 21203 Unit: Two
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-217 (name)
1650 Calvert Cliffs Parkway: Iusby, MD 20657-4702 MWO No: 2199800606 (addres) (P0. job no.)
3. Work Performed by: Baltimore Gas Electric, NED, CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No: N/A Exp Date: N/A
1650 Calvert Cliffs Parkway; LIsby. MD 20657-4702 Section XI Class: Two
4. Identification of System: System Number: 83 System Name: Main Steam
5. (a) Applicable Construction Code and Class: USAS B31.7 1969 ED. thru 1971 ADD.
(b) Applicable Edition of Section XI Utilized for Repairs/Replacements: 1983 Edition, Summer 83 Addenda 1992 Ed., Summer 92 Ad.(IWE/IWL)
6. Identification of Components Repaired or Rlplaced, and Replacement Components: ASME
Repaired. Code Name of Name of Manufacturen National Other Year Replaced or Stamped Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) NIA 2-83.4 N/A Replaced No SNUBBERS CORP. C-90-11-01
(V) V-90-1 I01-13
HYDRAULIC GRDN LL (CYL) N/A 244-4 1999 Replacement No SNUBBERS CORP. 86340253-1
(VB) 86342149-44
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER. 2-834
8. Tests Conducted: Hydrostatic: E0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: N/A, Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x 11", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: Senior Engineer Date: April 16, 1999
Owner or Owner's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/9 '-? to 4_-/Z-_'75 ,and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
_____ ,______ ______ ______ Commissions: AJ)ý 7ZZ?6 AtoJ- .Al() e,4-7 "Inspector's Signaure National Board, State, and Enaorsements
Date: ret4& pg 199<
Sheet 1 of 2
FORM NIS-2, OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required By the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company Date: March 19,1999 (name)
G&E Buildine, P.O. Box 1475, Baltimorem MD. 21203 Unit: Two (addre-s)
2. Plant: Calvert Cliffs Nuclear Power Plant R&R No: 98-2-218 (name)
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 MWO No: 2199800604 (addres) (POjob no.)
3. Work Performed by: Baltimore Gas Electric, NED. CCNPPD Type Code Symbol Stamp: N/A (name) Authorization No:- A Exp Date: NA
1650 Calvert Cliffs Parkway: Lusby. MD 20657-4702 Section XI Class: Two (addres)
4. Identification of System: System Number: 83 System Name: Main Steam
5. (a) Applicable Construction Code and Class: USAS B31.1 1967 ED. thru 1972 ADD. (b) Applicable Edition of Section XI Utilized for RepairsfReplacements: 1983 Edition, Summer 83 Addenda
1992 Ed., Summer 92 Ad.MWE/IWL) 6. Identification of Components Repaired or Replaced, and Replacement Components:
ASME R e Code Name of Name of Manufacturers National Other Year Replced, or Stamped
Component Manufacturer Serial Number Board No. Identification Built Replacement (Yes or No)
HYDRAULIC GRINNELL (CYL) N/A 2-83-15 NIA Replaced No SNUBBERS CORP. 75503196
(VB) 80511048-1
HYDRAULIC GRINNELL (CYL) N/A 2-83-15 1995 Replacement No SNUBBERS CORP. 91219611-35
(VB) 16345-91
7. Description of Work:
PERFORMED PREVENTIVE MAINTENANCE ON SNUBBER: 2-83-15
8. Tests Conducted: Hydrostatic: 0 Pneumatic: 0 Nominal Operating Pressure: 0 Pressure: N/A psi. Test Temperature: NIA Deg.
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided: (1) size is 8-1/2"x I 1", (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Sheet 2 of 2
FORM NIS-2, (Back)
9. Remarks: This plan implements Generic Replacement Plan G2, Rev. 1.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XU.
Type Code Symbol Stamp: N/A Certificate of Authorization No: N/A Expiration Date: N/A
Dan Hoang Signed: ------ -Senior Engineer Date: March 19, 1999
Owneror Own-e-r's Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA have inspected the
components described in this Owner's Report during the period /-/' 9 to -3 -/99 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASMiE Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
_____ _____ ____ Commissions: /V8 7."2ý--143N/A /-AD 7- 76 Inspector>'s6Iature National Board, State, and Endorsements
Date: ,• 4e f Z /159- 1997
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
Baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
Date: 0610811999
Sheet I of 2
Unit: Two
R&R No. 98-2-252b, MWO No. 2199802432(P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A
Authorization No.: N/A
Exp Date: N/A Section XI Class: . Two
4. Identification of System: System Number 061 System Name: Containment Spray
5.(a) Applicable Construction Code and Class: ASME Draft Code for Pumps & Valves, 1968 Edition, March 1970 SAdd; Class Two
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWE/IWL
"dentification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
ASME Repaired, Code
Year Replaced, or Stamped Built Replacement (Yes or No)
Valve Velan Engineering Co.
0358 N/A No. 21 Containment Spray Header Containment Side Check Valve
1977 Repaired
A
7. Description of Work: Perform machining as necessary on 2CKVSI-330 valve disc per ESP,# ES1 99900426-000.
8. Tests Condtacted: Hydrostatic: 0 Pressure: N/A psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: N/A Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
1. Owner:
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: No Section Xl Pre-Service NDE was performed in support of this activity. Performed a Construction Code
surface examination of all machined surfaces prior to installation of the disc.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Repair conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
SA.R. Zimmerman Signed: Welding Engineer *Date: 06/08/1999 r Owner's Designee, Title
Certificate of Inservice Inspection I, the undersigned, holding a vali, rnmission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employtu by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period -'• 3 '- 9 9 to S-&,- ?5 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examin, ns and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shuzl be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
" Inspor'Sinau Commissions: ea,• A.AJL- /-1,0 C',7
aiurcNational Board, State, and Endorsements Date: e: ? 1999
C7'U
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203
2, Plant:
(address)
Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
Date: 05/25/1999
Sheet 1 of 2
Unit: Two
R&R No. 98-2-253b, MWO No. 2199802433 (P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A
Authorization No.: N/A
Exp Date: N/A Section XI Class: . Two
4. Identification of System: System Number 061 System Name: Containment Spray
5. (a) Applicable Construction Code and Class: ASME Draft Code for Pumps & Valves, 1968 Edition, March 1970
Add; Class Two
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWE/IWL
' Identification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
Valve Velan Engineering vlv: 0379, disc: 6310 Co.
N/A No. 22 Containment Spray Header Containment Side Check Valve
1977 Repaired
7. Description of Work:
Perform machining as necessary on ?CKVSI-340 valve disc per ESP # ES199900426-000.
8. Tests Conducted: Hydrostatic: 0 Pressure: N/A psi.
Pneumatic: 0 Noninal Operating Pressure: 0 Test Temperature: N/A Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in.,
(2) information in Items I through 6"on this report is included on each sheet, and (3) each sheet is numbered and the
number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
NoNo
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
No Section XI Pre-Service NDE was performed in support of this activity. A Construction Code surfaceexamination of all valve disc machined surfaces was Derformed Drior to installation of the disc.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Repair conforms to the rules of
Signed: A!~I/i A.R. Zimmerman Welding Engineer .Date:
Ow fý..6wner's Designee, Title05/25/1999
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period 1-43- 'ý9 to _'-6 -?9 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
Commissions: ,6:/SOZ2c 6 A.".I ,'-r1-1 1 7 National Board, State, and Endorsements-
Date Z 99- ___
'I
Signed: •"•f".J•.,...•
'/, •-•
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required Required by the Provisions of the ASME Code Section Xl
1. Owner: "Baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant(name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657
Date: 07/12/1999
Sheet I of 2
Unit: Two
R&R No. 98-2-254a, MWO No. 2199700924 (P.O. no. job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: One
(addrss)
4. Identification of System: System Number 064 System Name: Reactor Coolant System
5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. II., 1983 Edition, Summer 1983 Add; Class One
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWE/JIWLIdentification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other IdentificatioriIdentificatioti Built Replacement (Yes or No)
Repaired, Year Replaced, or Bunlt Replacement
RCP Seal Sulzer Blngham Inc.
Seal Information for rebuild will be field
supplied.
1C863
Rebuilt IC865
NB 1249 # 21B Reactor Coolant Pump Mechanical Seal
N/A Seal, Cartridge Assembly (RCP) 875B-3V Complete Suizer Bingham per FCR 37-0074
1988 Replaced
Replacement
7. Description of WorkReplace mechanical seal on #21B Reactor Coolant Pump, as necessary. The replacement seal ID #(1C865) was rebuilt under MO # 0199701836. No pressure retaining parts were replaced.
8. Tests Conducted: Hydrostatic: 0 Pressure: 2300 psi.
Pneumatic: 0 Nominal Operating Pressure: ED Test Temperature: 532 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
Yes
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
A Section XI System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
A.R. Zimmerman Signed: Welding Engineer Date: 07/12/1999
0:?n-wnes Designee, Title
Certificate of Inservice Inspection
I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period 1/- 5 '6 to ,-- S - 9- 9 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
Sq. t46ommissions: A/68 AAZZ =-, / (-5/7 Inspector'sSnaturc National Board, State, and Endorsements
Date: 0-,4 199?
77 V1
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702(address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657
Date: 07/14/1999
Sheet 1 of 2
Unit: Two
R&R No. 98-2-255a, MWO No. 2199700926 (P.O. no.,job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: One.
(address)
4. Identification of System: System Number 064 System Name: Reactor Coolant System
5. (a) Applicable Construction Code and Class: ASME B&PV Code Sect. il1, 1983 Edition, Summer 1983 Add; Class One
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWE/IWL
Identification of Components Repaired or Replaced and Replacement Components:
Name of Name of .Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
RCP Seal Sulzer Bingham Inc.
Seal Rebuild Info field supplied
1C875
Rebuilt 1Ce74
NB 1242 # 22B Reactor Coolant Pump Mechanical Seal
N/A Seal, Cartridge Assembly (RCP) 975B-3V Complete Sulzer Blnghan per FCR 87-0074
1955 Replaced
Replacement
7. Description of Work: Replace mechanical seal on #22B Reactor Coolant Pump, as necessary. The replacement seal ID #(1 C874) was rebuilt under MO # 1199700068. No pressure retaining parts were replaced during the rebuild of this cartridge.
8. Tests Conducted: Hydrostatic: 0 Pressure: 2300 psi.
Pneumatic: 0 Nominal Operating Pressure: D Test Temperature: 532 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
Yes
Yes
FORM NIS-2 (Back)
9. Remarks: A Section XI System Hydrostatic Test of the affected component was performed durinq the system
conditions listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
SA z mm an A.R. Zimmerman ae Signd: W ý ý:e _13 07/14/1 999 Owner o er's Designee, Title Wding Eng
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components ,a-scribed in this Owner's Report during the period 3-14-99 " to S'-S- 1i , and state to the best of my vledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Re,•,,rt in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
"/ -4Ispc/K) Signatur .# Commissions: A,, 8 Z26 A Z: -" -•*IA -/7 nnspt Signature National Board, State, and Endorsements
Date: /, -o 1991
Sheet 2 of 2
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required Required by the Provisions of the ASME Code Section XI
1. Owner: ".Baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (addres)
2. Plant: Calvert Cliffs Nuclear Power Plant(name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
Date: 07/13/1999
Sheet I of 2
Unit: Two
R&R No. 98-2-255b, MWO No. 2199700926 (P.O. no., job no.. etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: One
4. Identification of System: System Number 064 System Name: Reactor Coolant System
5. (a) Applicable Construction Code and Class: ASME B&PV Code Sect. I11, 1965 Edition, Winter 1967 Add; Class A
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad: 92 Ed summer 92 Ad for IWE/IWL
6. Identification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
SRepaired, Year Replaced, or Built Replacement
Built ReplacementPump Byron Jackson
PUMP Cover Rebuild Info field
supplied
681-N4)444
Rebuilt 681-N-0437
NIA #22B Reactor Coolant Pump
N/A Pump Cover and Heat Exchanger 1998 Assembly, Bryan Jackson Part No. IE-3567V V
L977 Replaced
Replacement
7. Description of Work: This R&R Plan was to make necessary repairs to # 22B Reactor Coolant Pump (2PUMPRC22B). A rebuilt rotating assembly and pump cover was installed back into 22B pump casing.
8. Tests Conducted: Hydrostatic: 0 Pressure: 2300 psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: 532 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
Yes
No
Sheet 2 of Z
FORM NIS-2 (Back)
9. Remarks:
A Section XI System Hydrostatic Test of the affected component was performed during the system conditions listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
A.R. Zimmerman Signed: Welding Engineer Date: . -'..• . WedingEngieer07/13/1999
Ow ;,ý e's Designee, Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period //to - -to -"9 9 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
-lnsp-ctor Signatur-Commissions: Naioa Boa-,rd, State, andEd natrcNational Board, State, and Endorsements
II IJ
V,
Date: 9r.,-i /•el199 I 1/ /7L.ý,
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company(namne)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
Date: 07/0911999
Sheet I of 2
2. Plant: Calvert Cliffs Nuclear Power Plant(name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
Unit: Two
R&R No. 98-2-275a, MWO No. 2199801841 (P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date:' N/A Section XI Class: Two
4. Identification of System: System Number 052 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: ASME B31.1.0 1967 Edition, CCase N-10
(b) Applicable Sect XI Ed. for Repairs/Replacement, 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWE/IWL
6. Identification of Components Repaired or Replaced and Replacement Components:
.ame of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
2CKVS1434
Mannesmann S3523-GX 7762620-3 Demag
Huttentechnik
N/A #22 LPSI Pump Discharge Check 1977 Replaced Valve
N/A Valve, Nozzle Check, 10" 300 lb, 1991 .Replacement Flanged ends, S.S. Body
7. Description of Work:
This R&R Plan is to allow replacement of #22 Low Pressure Safety Injection Pump Discharge Check Valve (2SI-434) on piping line 10" GC-1 -2003. This work was performed by Framatome Technologies under their special processes and controls.
8. Tests Conducted: Hydrostatic: 0 Pressure: 200 psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: 733 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Valve Velan Eg ainering Co.
Valve
ASME Code
Stamped (Yes or No)
No
No
Sheet 2 of -2
FORM NIS-2 (Back)
9. Remarks: A Section X1 System Functional Test of the affected component was performed during the system
conditions listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
AR Zimmerma Signed: Welding Engineer Date: 07/09/1999
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period 3--//-, to '- 4 -s , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
• )• •"--•J . • c•'t Commissions: 4,88ZL•,,€Z:,/), /2-"
e gnatur National Board, State, and Endorsements
Date: ZZ 1990
i 7IV v
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company (name) oa
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203
(address)
Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (Uame)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
2. Plant:
.Date: 07/0911999
Sheet 1 of 2
Unit: TWO
R&R No. 98-2-275b, MWO No. 2199801841 (P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: Two
4. Identification of System: System Number 052 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: ASME B31.7 1969 Edition, Summer 1971 Add; Class Two
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad: 92 Ed summer 92 Ad for IWE/IWL
A. Identification of Components Repaired or Replaced and Replacement Components:
Name of Componet
Name of Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
Piping System Bechtel
Nut Nova Machine Products Corp.
Flange, Pipe, Energy Steel & 10", SA-182 Supply Co.
Rod Cardinal Ind. Products
10"GCI-2003
20219
25863
57533-GX
N/A #22 LPSI Pump Discharge Check Valve Piping
N/A Nut, Heavy Hex, I In. X 8 1PI, SA-194 Gr. 2H
N/A Flange, Pipe, 10", Raised Faue, 3001b.,Welding Neck, ASME SA
.182, Grade F316 N/A Rod, Allthread, lin. X S
TPI, SA-193 Gr. B7
1977 Replaced
7. Description of Work:
This R&R Plan is to allow replacement of necessary piping, weld neck flange, and line bolting when replacing #22 Low Pressure Safety Injection Pump discharge check valve in line class 10" GC-1-2003. This work was performed by Framatome Technologies under their special processes and controls.
S. Tests Conducted: Hydrostatic: 0 Pressure: 200 psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: 73 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x II in.,
(2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the
number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
1998 Replacement
1998 Replacement
1992 Replacement
No
No
No
No
FORM NIS-2 (Back)
9. Remarks: A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report. Code Case N-416-1 is hereby invoked to satisfy Section X1 required pressure test requirements. Volumetric Examination and Surface Examinations of welds were performed in accordance with ASME Section 111.• 1992 Edition.
Applicable Manufacturer's Data Reports to be Attached Certificate of Compliance
We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Signed: ARZm a 07/09/1999 Welding Engineer Date:
ca or Owner's Designee, Title 0/9 9
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period / Z -/8 - ?11 to 2-,S-'-5' , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
" -- • 1 natur, ~ ~~Commissions: •_• '/~-- A•,• • Co mS miission National Board, State, and Endorsements
Date: 199.9
Sheet 2 Of 2
"IFORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company (name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702(addess)
3. Work Performed by: Baltimore Gas Electric, NED(name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (addrmss)
Date: 07109/1999
Sheet I of 2
Unit: TWO
R&R No. 98-2-276a, MWO No. 2199603215 (P.O. no. job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: TWO
4. Identification of System: System Number 052 System Name: Safety Injection
5.(a) Applicable Construction Code and Class: ASME B31.1.0 1967 Edition, CCase N-10
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad: 92 Ed summer 92 Ad for IWEIiWL
" Identification of Components Repaired or Replaced and Replacement Components:
Name of .Componet
Name of Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
- Repaired, Year Replaced, or Built Replacement
0043
bMannesann M523-GX 7762620-4 Demag
Huttentedinik
N/A #21 LPSI Pump Discharge Check 1977 Replaced Valve
N/A Valve, Nozzle Check, 10" 300 Ib, 1991 Replacement Flanged ends, SS. Body
7. Description of Work: This R&R Plan is to allow replacement of #21 Low Pressure Safety Injection Pump Discharge Check Valve (2SI-446) on piping line 10" GC-1 -2002. This work was performed by Framatome Technologies under their special processes and controls.
8. Tests Conducted: Hydrostatic: 0 Pressure: 2-102 psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: 90 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Valve Velan Enginnering
Valve
ASME Code
Stamped (Yes or No)
No
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: A Section XI System Functional Test of the affected component was performed durinq the system
conditions listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this the ASME Code, Section XI.
Replacement conforms to the rules of
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
A.R. Zimmerman Signed: Welding Engineer Date: r or Owner's Designee, Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period "-9/1(- to. !/- ZZ- 9 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
Commissions: 7IB-C 26A,,•J , .Insp :torfSignature National Board, State, and Endorsements
D 1ae199:
VF
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203
2. Plant:
(address)
Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED
(name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657
Date: 07/0911999
Sheet I of 2
Unit: Two
R&R No. 98-2-276b, MWO No. 2199603215 (P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A
Authorization No.: N/A Exp Date: N/A Section XI Class: Two
(address)
4. Identification of System: System Number 052 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: ASME B31.7 1969 Edition, Summer 1971 Add; Class Two
(b) Applicable Sect XI Ed. for Repairs/Replacement' 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWEIWL
6. Identification of Components Repaired or Replaced and Replacement Components:
aname of Componet
Name of Manufacturer
Manufacurers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
Piping System Bechtel
Nut Nova Machine Products Corp.
Rod Cardinal Ind. Products
Flange, Pipe, Energy Steel & 10", SA-182 Supply Co.
10"GCI-2002 NIA #21 LIPSI Pump Discharge Check Valve Piping
20219 WA Nut, Heavy Hex, I n. X S TPN, SA-194 Gr. 2Hl
57533-GX WA Rod, Allthread, lin. X 8 WTI, SA-193 Gr. B7
25863 N/A Flange, Pipe, 10", Raised Face, 3001b,Welding Neck, ASME SA182, Grade F316
1977 Replaced
1r S Replacement
1992 Replacement
1998 Replacement
7. Description of Work: This R&R Plan is to allow replacement of necessary piping, weld neck flange, and line bolting when replacing #21 Low Pressure Safety Injection Pump discharge check valve in line class 10" GC1-2002. This work was performed by Framatome Technologies under their special processes and controls.
8. Tests Conducted: Hydrostatic: 0 Pressure: 210 psi.
Pneumatic: 0 Nominal Operating Pressure: 10 Test Temperature: 9_0 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
No
No
No
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: A Section Xl System Leakage Test of the affected component was performed during the system conditions listed in section 8. of this report. Code Case N-416-1 is hereby invoked to satisfy Section X< required
pressure test requirements. Volumetric Examination and Surface Examinations of welds were performed in accordance with ASME Section III, 1992 Edition.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Signed: ,/ ,... _A.R. Zi mmnerman Welding Engineer Date: 07/09/1999
,ý •r Owner's Designee, TitleEnier0/ 91 9
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period / Z-A, - 9 to el- Z Y?' 7 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By sign.. ,g this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
" f~h Isoectr'sgigatur•Commissions: ,1-fE9 Z_.-. ,,Z2 -1ifZ.. In"D) "7 InspCommrs_ ss9ons: NationalBoardState, and Endorsements
Date: ,¢
V v
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEME/ITS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED
(name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657
Date: 07/13/1999
Sheet I of 2
Unit: Two
R&R No. 99-2-012, MWO No. 2199703971 (P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/AExp Date: N/A Section XI Class: One.
(address) 4. Identification of System: System Number 064 System Name: Reactor Coolant System
5.(a) Applicable Construction Code and Class: ASME B&PV Code Sect. 11, 1968 Edition, Winter 1968 Add; Class A, CCases 1581, N-2, N-1 0
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad: 92 Ed summer 92 Ad for IWE/IWL
" Identification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National' Board No.
Other Identificatioil
Repaired, Year Replaced, or Built Replacement
Dresser Industries BT06815 Dresser Indusries 28696 BY68900
Inc.
NIA Pressurizer Steam Safety Valve WA Valve, Pressurizer Relief, ERV,
I&2-ERV402, 404; 2500 lb.
197" Replaced 1998 Replacement
7. Description of Work: Replace pressurizer relief valve 2ERV402 with a new valve.
8. Tests Conducted: Hydrostatic: 0 Pressure: 2300 psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: 532 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I 1 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
Valve Valve, Pzr. Rel•ef, ERV
ASME Code
Stamped (Yes or No)
Yes No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: A Section Xl System Leakage Test of the affected component was performed durinq the system conditions
listed in section 8. of this report. Per Section Xl, IWB-2200(b), shop visual and PT exams were accepted in lieu of the specified VT-i Visual Examination of valve bolting.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of
the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Signed: A.R. Zimmerman Signed Welding Engineer Date: 07/13/1999 , A Owner's Designee, Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period 3 - / 7- 9 5 to 7-/3- 9 € , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes anywarrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
(~~ A/R-. {i--v Q Commiss ions: K4e ,?e AIZ: e,- -/ Inspector s/ignaturc National Board, State, and Endorsements
Date: a4.A 199•
/1 LV
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: "Baltimore Gas Electric Company
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (addreis)
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED(name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (addmes)
Date: 07/1311999
Sheet 1 of 2
Unit: Two
R&R No. 99-2-014, MWO No. 2199403477 (P.O. no., job no.. etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: One
4. Identification of System: System Number 052 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: ASME B16.5 Pipe Flanges and Flanged Fittings NPS 1/2 in. thru 24in.
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWEIIWL
Identification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
-Manufacturers National Serial Number Board No.
Other Identificatiod
Repaired, * Year Replaced, or -.Built Replacement
Valve Velan Enginnering CO.
Disc Velan Engineering CO.
Stud Velan Engineering CO.
Stud Velan Engineering Co.
Stud Velan Engineering Co.
Nut Velan Engineering Co.
Nut Velan Engineering Co.
s010
10523-GX 7051
53907-GX
54027-GX
10523-GX
90247-GX
1047-GX
N/A 21A Loop Inlet Check Valve
WA Disc, Velan 1" 1'00M SwlChkv P/N 8209-033N440
WA Stud, Cover, Velan 12" Sw Ckv, P-34754-1, 1-7/8"xSTx9-1/4"
IfA Stud, Cover, Velan 12" Sw Ckv., P-34754-1, 1-7/"•T0xS-x/4"
N/A Stud, Cover, Velan 12" Sw Ckv., P-34754-i, 1-7/""xTP1x9-1/4"
N/A Nut, Hex, Cover, 1-7/9"xTPI, SA-194 Gr7,12 In. SwCkv 15001
WA Nut, Hex, Cover, 1-7/8"xSTPJ, SA-194 Gr7,12 In. SwCkv 1500#
17 Replaced
19S Replacement
1I9 Replacement
1984 Replacement
1995 Replacement
1994 Replacement
1995 Replacement
7. Description of Work: Overhaul 2CKVSI-227; replace valve disc and cover bolting as necessary. Remove anti-rotation lugs in accordance with instructions on drawing 12124-0014 if needed.
8. Tests Conducted: Hydrostatic: [I
Pressure: 2300 psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: 532 Deg. F
"E: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., .nformation in Items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and the
number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
No
No
No
No
No
No
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: A Section XI VT-1 Visual Examination of the replacement threaded fasteners was performed to satisfy Section Xl Pre-Service NDE Requirements. A Section Xl System Leakaqe Test of the affected component was performed during the system conditions listed in section 8. of this report. Performed a surface examination of the drilled keyways and coffer pin hole. The replacement valve wedqe/plug/disc/trim received a Construction Code Surface Examination at the request of the resident ANII.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Replacement conforms to the rules of
Signed: ~S-Own wiwner's Designee, Title
A.R. Zimmerman Welding EngineerWelding Engineer
Date: 07/13/1999
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period 3- Z7-9 to "S-- '- . , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or
connected with this inspection.
National Board, State, and Endorsements
Date: 4'3 1991
I, I, 'I
I-,V" L,,o"
I
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required Required by the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant
1650 Calvert Cliffs Parkway; Lusb-y, Maryland., 20657-4702 "I .. address)
3. Work Performed by: BakiiMore Gas Electric, NED -. '-. ..(name)
CCNPP Dept, 1650 Calveit Cliffs Parkway, Lusby, MD 20657 (address)
Date: 05/17/1999
Sheet I of 2
Unit: Two
R&R No. 99-2-016, MWO No. 2199900912 (P.O. no.,job no.. etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: NIA Section XI Class: Two
4. Identification of $ystem: System Number 083. System Name: Main Steam & SG Secondary Side & SG
5. (a) Applicable Construction Code and Class: ASME B31.7 1969 Edition, Summer 1971 Add; Class Two
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad: 92 Ed summer 92 Ad for IWE/IWL
dentification of Components Repaired or Replaced and Replacement Components:
Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
ASME Repaired, Code
Year Replaced, or Stamped Built Replacement (Yes or No)
N/A Main Steam Piping between Uner plate and Isolation valves.
1990 Repaired No
7. Description of Work: A weld repair will be made to 6"EB-1 2-2007 because of a location found below minimum wall thickness during an F.A.C. Inspection.
8. Tests Conducted: Hydrostatic: 0 Pressure: N/A psi.
Pneumatic: 0 Nominal Operating Pressure: 0 Test Temperature: N/A Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x I 1 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the kip of this form.
Piping System Bechtel 6'EB12-2007
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks:
No Section XI Pre-Service NDE was performed in support of this activity.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Repair conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
A.R. Zimmerman Signed: Welding Engineer Date: 05/17/1999 ,.ýner or Owner's Designee, Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period 3 -ZO-T'? to -"--/?-? ,and state to the best of my knowledge and belief, the Own-r has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
"Commissions: /J-, A.Z.Z, ,Jz, WDZ $4 7 Insptor', ignatur National Board, State, and Endorsements
Date: • 199T
7?'td
- FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required Required by the Provisions of the ASME Code Section XI
I. Owner: - Baltimore Gas Electric Company (name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant(name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657(address)
Date: 06/0911999
Sheet I of 2
Unit: TWO
R&R No. 99-2-025, MWO No. 2199901038 (P.O. no., job no. etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: One .
4. Identification of System: System Number 052 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: ASME B31.7 1969 Edition, Summer 1971 Add; Class One
(b) Applicable Sect XI Ed. for Repairs/Replacement, 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWEflWL6. Identification of Components Repaired or Replaced and Replacement Components:
lame of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other IdentificationIdentification Built ReDlacement (Yes or No)
Repaired, Year Replaced, or Built Replacement
Beclhtel
Dubose Nat'l Energy
Allied Group
Bolt " Cardinal Ind. Products
CC4-2009-R9
53792.GX
31389
8U400.%X -
N/A Safety Injection Piping Support
N/A Plate, Steel 1/2 in. ASME SA-36, Carbon Steel
N/A Nut, Heavy Hex, 3/4 in. X 10 TPI, SA-194 Or. 2H
N/A Bolt, Heavy Hex Head, 3/4 In. X 2 In. X 10 TPI, SA-325 Tp. 1
1977 Replaced
1992 Replacement
1998
1V9
Replacement
Replacement
7. Description of Work: Modify 120CC4-2009-R9 beam (box structure); install splice connection on horizontal members.
8. Tests Conducted: Hydrostatic: 0 Pressure: N/A
Pneumatic: 0 Nominal Operating Pressure: 0 psi. Test Temperature: N/A Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
rapuzg bystem Plate
Nut
ASME Code
Stamped (Yes or. No)
No No
No
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: A Section XI VT-3/4 Visual Examination of the affected component support was performed prior to the
system beinq returned to service.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
A.R. Zimmerman Signed: Welding Engineer Date: 06/09/i ;99 0. r O nr's Designee. Title
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors
and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period W-3-93 to -/,- ,and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI.
By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
"-_er' nuCommissions: /J- S2--Z6 A'J-Z ,'41. •7 e National Board. State, and Endorsements
Date: 199.
ý1'V
- FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company(name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant (name)
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (address)
Date: 06/09/1999
Sheet I of 2
Unit: Two
R&R No. 99-2-028, MWO No. 2199705517(P.O. no. job no., etc.)
Type Code Symbol Stamp: N/A
Authorization No.: NIA
Exp Date: N/A Section XI Class: Two
4. Identification of System: System Number 083 System Name: Main Steam & SG Secondary Side & SG
5.(a) Applicable Construction Code and Class: Bechtel Spec 6750-M-292 Atmospheric Dump & Turbine Bypass Control Valves
(b) Applicable Sect XI Ed. for Repairs/Replacement 83 Ed summer 83 Ad: 92 Ed summer 92 Ad for IWE.IWL
'dentification of Components Repaired or Replaced and Replacement Components:
.Name of Name of Componet Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
Valve Copes Vulcan Inc.
Trim Copes-Vulcan Inc.
144004
26137 145380
N/A #21 Main Steam Header Atmospheric Dump Valve
N/A Trim, Assembly, Valve, S Inch, 6001b., Dwg. B-143178, P/N 701095030001050
1977 Replaced
1998 Replacement
7. Description of Work:
Overhaul #21 Main Steam Atmospheric Dump 2CV3939; replace trim and bolting as necessary.
8. Tests Conducted: Hydrostatic: 0 Pressure: 870 psi.
Pneumatic: 0 Nominal Operating Pressure: . Test Temperature: 400 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
I
ASME Code
Stamped (Yes or No)
No
No
Sheet 2 of 2
FORM NIS-2 (Back)
9. Remarks: A Section XI System Functional Test of the affected component was performed durinq the system
conditions listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
Replacement conforms to the rules of
A.R. Zimmerman Signed: 6 Welding Engineer Date: 0 r wner's Designee, Title
06/09/1999
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period zll-, 7ý to " ') , and'state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
Commissions: -ha .zZ A ", Z Ai .'f Inspectr's Signaturc National Board, State, and Endorsements
Date: -z.,4.199A
61
FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS
As Required Required by the Provisions of the ASME Code Section XI
1. Owner: Baltimore Gas Electric Company I (name)
G&E Building, P.O. Box 1475, Baltimore, Maryland, 21203 (address)
2. Plant: Calvert Cliffs Nuclear Power Plant
1650 Calvert Cliffs Parkway; Lusby, Maryland., 20657-4702 (address)
3. Work Performed by: Baltimore Gas Electric, NED (name)
CCNPP Dept, 1650 Calvert Cliffs Parkway, Lusby, MD 20657 (addrmss)
Date: 07/01/1999
Sheet I of 2
Unit: TWO
R&R No. 99-2-036, MWO No. 2199802244(P.O. no., job no., etc.)
Type Code Symbol Stamp: N/A Authorization No.: N/A Exp Date: N/A Section XI Class: Two.
4. Identification of System: System Number 052 System Name: Safety Injection
5. (a) Applicable Construction Code and Class: API-Std. 610, 4th Edition, 1965
(b) Applicable Sect XI Ed. for Repairu/Replacemenf 83 Ed summer 83 Ad; 92 Ed summer 92 Ad for IWE/IWL
6. Identification of Components, Repaired or Replaced and Replacement Components:
Name of Componet
Name of Manufacturer
Manufacturers Serial Number
National Board No.
Other Identification
Repaired, Year Replaced, or Built Replacement
Pump Ingersol Rand
Pump, Assem., Ingersol Rand Co LPSI
2PUMPSILPSIZ1
1719O-MX 2973A
WfA #21 Low Pressure Safety Injection Pump
WfA Pump Assembly, Complete minus Pump Casing for Low Pressure Safety Injection Pump(s)
1977 Replaced
1982 Replacement
7. Description of Work:
This R&R Plan Is for the replacement of the stuffing box extension on the rotating assembly for #21 Low Pressure Safety Injection Pump. The replacement assembly was rebuilt under MWO 0199600804. The stuffing box extension Is considered a-pressure retaining part from Mech# 59B35.
8. Tests Conducted: Hydrostatic: E0 Pressure: 210 psi.
Pneumatic: E0 Nominal Operating Pressure: 0 Test Temperature: 9.0 Deg. F
NOTE: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 8-1/2 in. x 11 in., (2) information in Items I through 6 on this report is included on each sheet, and (3) each sheet is numbered and the number of sheets is recorded at the top of this form.
ASME Code
Stamped (Yes or No)
No
No
FORM NIS-2 (Back)
9. Remarks: A Section XI System Functional Test of the affected component was performed durinq the system
conditions listed in section 8. of this report.
Applicable Manufacturer's Data Reports to be Attached
Certificate of Compliance We certify that the statements made in this report are correct and that this Replacement conforms to the rules of the ASME Code, Section XI.
Type Code Symbol Stamp: N/A Certificate of Authorization No.: N/A Expiration Date: N/A
AR Zimmenoo Signed: Welding Engineer Date:
07/01/1999
Certificate of Inservice Inspection I, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State of Maryland and employed by Factory Mutual Insurance Co. of Norwood, MA. have inspected the
components described in this Owner's Report during the period 7/- ZZ- 9!5Z- to - Z 7-99 , and state to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code, Section XI. By signing this certificate neither the Inspector nor his employer makes any warrant, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage of a loss of any kind arising from or connected with this inspection.
/L)74Y•j•fC_9i Commissions: Z) 6' Z_6 A-)Z Ifl2 , 5•7' Sn Signaturc National Board, State, and Endorsements
Date: 199'
Sheet 2of 2 ý