Dedicated to theScience of Motion
www.aerotech.com
AutomationSolutions forMedical DeviceManufacturingand Life Sciences
A e r o t e c h W o r l d w i d eUnited States • France • Germany • United Kingdom • Japan • China
2 www.aerotech.com
Aerotech Success in the Medical Device Industry ......................................3
Stent Manufacturing......................................................................................4
General Cylindrical Processing .....................................................................8
Hermetic Seam Welding ............................................................................10
Intraocular (IOL) and Contact Lens Manufacturing..................................12
Toric Lens Manufacturing............................................................................13
Next Generation DNA Sequencing...........................................................14
Bio Printing ...................................................................................................16
Molecular-Level Life Sciences ....................................................................18
Medical Devices, Oncology and Imaging ...............................................20
Control Solutions.........................................................................................22
MotionPAC - PLC Integrated with Motion .................................................26
Advanced System Controls ........................................................................28
Linear Stages and Gantries........................................................................30
Rotary Stages ..............................................................................................32
Aerotech at a Glance .................................................................................34
Engineered Systems ....................................................................................36
Awards and Recognition ............................................................................37
Capabilities in Other Markets....................................................................38
ContentsWORLD HEADQUARTERSAerotech, Inc.101 Zeta DrivePittsburgh, PA 15238Ph: 412-963-7470Fax: 412-963-7459Email: [email protected]
Aerotech France28300 ColtainvilleFrancePh: +33 2 37 21 87 65 Fax: +44 (0)1256 855649Email: [email protected]
Aerotech GermanyGustav-Weißkopf-Str. 1890768 Fürth, GermanyPh: +49 (0)911 967 9370Fax: +49 (0)911 967 93720 Email: [email protected]
Aerotech United KingdomThe Old Brick KilnRamsdell, TadleyHampshire RG26 5PRUnited KingdomPh: +44 (0)1256 855055Fax: +44 (0)1256 855649Email: [email protected]
Aerotech ChinaRoom 101, No. 28 BuildingTianlin Road 140Xuhui DistrictShanghai, China 200234Ph: +86 (21) 6126 1058Email: [email protected]
Aerotech JapanWBG Marive East 22F2-6-1 NakaseMihama Ward, ChibaJapan 261-7122Ph: +81 (0)50 5830 6821Fax: +81 (0)43 306 3773Email: [email protected]
Aerotech Taiwan5F., No.32, Aly. 18, Ln. 478Ruiguang RoadNeihu District, Taipei CityTaiwan R.O.C. Ph: +886 (0)2 8751 6690Email: [email protected]
Copyright © 2014, Aerotech, Inc. Information inthis brochure is subject to change without notice.
3
Aerotech Success in the
Medical Device Industry
Advancements in core technologiessuch as electronics, software, andimaging have continued to drive thedevelopment of new medical devicesand diagnostic procedures. Thegrowing complexity of these devicesand stringent FDA validationprocedures require precisionautomation components and systemsto ensure consistent, repeatableresults. Likewise, the costs associatedwith supporting the infrastructure andintegration of these systems intospecialized cleanroom manufacturingenvironments require solutions with thehighest possible output per squarefoot of production space while limitingmaintenance and downtime.
Aerotech is uniquely positioned tomeet the stringent requirements of themedical industry. Our standard motionproducts can be configured to meetmost automation requirements, withproven reliability demonstrated bysales into the medical field since1970. Application specific optimizedsolutions, such as our stent cutting andhermetic sealing solutions, areavailable that can demonstrate up toa 5x improvement in throughput overconventional approaches, providing alower total cost of ownership andmaximizing your return on investment.
Applications served:
•Stent Cutting
•Cardiac Pacemaker, Defibrillator, and Neuro-Stimulation Seam-Welding Systems
•Guidewire, Catheter, and Hypotube Manufacturing
•DNA Sequencing
•CAT Scanners
•Proteomics
•Patient and X-Ray SourcePositioning
•Magnetic Resonance Scanners
•Oncology
•Surgical Staples
•Intraocular and Contact LensManufacturing
•Retinal Inspection
4 www.aerotech.com
Solutions For
Stent ManufacturingVascuLathe represents a revolutionary approach to satisfying the demanding requirements of stent manufacturingapplications. The fully integrated motion system couples automated material handling functionality with high performancedirect-drive linear and rotary motion capability. The integral linear-rotary design increases throughput by two to five timeswhen compared to traditional screw-based or other manufacturing approaches, while still maintaining submicron toleranceson tight part geometries.
The increased throughput gives much needed flexibility in the extremely competitive stent-manufacturing environment. Thehigher throughput of the VascuLathe implies that fewer machines are required to produce an equivalent number of stentswhen compared to traditional manufacturing approaches, resulting in lower total labor costs and reduced floor spacerequirements. Alternatively, the VascuLathe can be used to meet increased and varied product demand within the existingmanufacturing space, saving the costs associated with facility expansion.
Stainless roll covers protect bearings andfeedback from contamination
Optional wet cutting with coolant return
Integral frictionless rotary union optimizedfor stent manufacture provides a lifetime ofmaintenance-free operation
Simplified, reliable cable managementsystem ensures trouble-free operation
Precision ER16, ER25, or ER40 colletssupport 0.5 mm to 30 mm O.D. tubing,enabling the VascuLathe to support themanufacture of a wide array of peripheral,cardiovascular, and neurovascular stents
Parallel jaw gripper for automated advanceof tubing material
Manual alignment fixture with precisionreference surface and locating pins for rapidreplacement of bushing material
Lower material centerline reduces machineheight and fixture sizes giving a lowerprofile, more rigid system
Sophisticated machine structure facilitateseasy alignment, maintenance, and operation
Threaded tooling areas located at the frontand back of the VascuLathe ease integrationof custom material handling features
1
2
3
4
5
6
7
8
9
10
U.S. Patent 7,038,334
U.S. Patent 7,105,956
U.S. Patent 7,420,298
5
The VascuLathe features Aerotech’sAutomation 3200 controller (A3200), a100% digital automation platform. TheA3200’s advanced control architecturehas special path planning functionalitythat automatically adjusts the cuttingspeed to minimize path errors in tightstent geometry, maintaining formquality throughout the part.Sophisticated laser control functionsautomatically adjust the laser powerand repitition rate to minimize the heat-affected zone of the material as afunction of the cutting speed.Specialized drive electronics areoptimized for the frequent directionreversals encountered in a typical stentprofile and help to further minimizefollowing error. Advanced plotting anddiagnostic tools display axisperformance in real time and processmonitoring functions report peakposition error, path cut length, and stentcut time at the completion of each part,providing an instantaneous measure ofpart quality on a piece-by-piece basis.
Highly advanced drivetechnology results in
Future-proof software-only control andnetwork architecture(FireWire®)
Special softwareprograms assist inproduct changeover
®
VascuLathe DS uses a dual spindleconfiguration to produce twice theoutput of the standard VascuLathe. For a10% increase in space (approximatefinished machine size) the DS provides a100% improvement in capacity, furtherreducing floor space, facility, andmanpower requirements. The VascuLatheDS is also very effective at increasingthroughput for processes that areintrinsically slow due to laser power ormaterial processing limitations.
6 www.aerotech.com
Solutions For
Stent ManufacturingThe LaserTurn series provide a lowercost entry point for stentmanufacturing applications. Thesystems have similar automatedmaterial handling capabilities as theVascuLathe, but they do not supply thesame level of dynamic contouringaccuracy and acceleration. TheLaserTurn products are targeted atlower speed cutting processes, stentinspection, and drug depositionapplications.
Optional front and rear toolingplatforms support attachment ofspecialized part fixtures. A gripperoption is available for automated tubeadvance with a manually adjustedY/Z bushing holder to center thematerial under the laser cutting head.
LaserTurn 1
•Tube capacity from 0.1 mm to 7.9 mm
•Combined low inertia rotary axisand low mass moving stage providethe highest throughput in theLaserTurn series
•Collet system with moving taperdesign limits axial tube motion forunattended manufacturing ofunlimited length parts
•Wet cutting option available to limitbackwall and thermal damage tothe material under process
LaserTurn 2
•Tube capacity from 0.5 mm to10 mm
•Highest torque to inertia ratio in theLaserTurn series reduces processingtime in complex contours
•Low TIR ER collet system minimizesmechanical positioning inducederrors during the laser cuttingprocess
•Wet cutting option available to limitbackwall and thermal damage tothe material under process
LaserTurn 5
•Interchangeable ER25 and ER40collet system provides the widestmaterial handling range of theLaserTurn series (0.5 mm to 30 mm)
•Optional 3-jaw gripper for insidegripping of large diametermaterials or for handling odd-form components
•Largest linear motor in the LaserTurnseries for high duty cycle, high loadapplications
• Wet cutting option available to limitbackwall and thermal damage tothe material under process
LaserTurn 1
LaserTurn 2
LaserTurn 5
7
Normalized Parts Per Hour(With Equivalent Tolerance)
For a given part manufacturingtolerance the VascuLathe producesthree times as many parts per hourwhen compared to the entry-levelLaserTurn 2.
Part Accuracy Versus Cycle TimeComparison
When cutting speeds and cycle timesare fixed by process variables, theVascuLathe and LaserTurn 1 canprovide a 3X improvement in contouraccuracy.
Configuration Options:
•Front and rear tooling platforms foreasy integration of material handling
•Pneumatic activated, seal-lessrotary union provides years ofmaintenance-free operation
•Parallel jaw gripper for automatedtube advance
•Bushing alignment platform withY/Z micrometer adjustment reducestube TIR at the cut point
Tube Capacity and Collet TypeComparison
LaserTurn 1
.1 mm
LaserTurn 5/VascuLathe/DSLaserTurn 2
35
30
25
20
15
10
5
0
Tube
Dia
met
er
.5 mm .5 mm
Type DER16
ER25
ER40
3 JawGripper
8 www.aerotech.com
Many medical devices and diagnostictools are fabricated from tubularmaterials that can have multiplefeatures integrated along their length.For example, a hypotube may have askive or slot on the distal end tofacilitate the placement of componentssuch as balloon catheters, and willhave a spiral or interlaced pattern cutalong the length for flexibility anddirectional control when inserted intothe body. Endoscopes haveintersecting, welded, cylindricalfeatures for camera and control portsand irrigation features for clearviewing through the device. All ofthese products require precise angularpositioning and velocity control duringthe manufacturing process to ensureconsistent, repeatable performance ofthe finished component.
Featuring/Recommendations:
•A3200 or Ensemble motioncontroller
•Rotary axes with integral pneumaticcollet adapters and 3-jaw grippers(ACS, ACS LP)
Low Profile, Direct-Drive RotaryStages Feature ER Collets
•Air-activated collets support 0.2 to30 mm tube diameters
•Direct-drivemotor replacesworm-drivemechanisms formaintenance-free operation
•600 rpm peak speed for high-speedmaterial processing applications
Guidewires, Catheters,Cannulae, Hypotubes, andEndoscopes
3-Jaw Grippers
•Clear aperture for product feed-through
•Optional jaw travel range to optimizegripping force or material capacity
•Custom jaw profiles can be created to gripodd-form products or set the depth of grip
CCS Mechanical-Bearing Direct-Drive Rotary Stage
•Integral pneumatic collet chuck
•Captive collet design minimizes axial tubemotion during clamp/unclamp cycles
•Clear aperture for product feed-through
Solutions For
General Cylindrical ProcessingACS LP series
ACS with 3-jaw gripperLaserTurn 5 with 3-jaw gripper
9
Captured Collet Systems
Captured collet systems have threads on the end of the collet that are used to fix thecollet to the closing system. In most machine tools this type of collet is threaded intoa “draw-bar” mechanism that moves the collet against a mating tapered surface toopen and close the device. As the collet is closing, this motion can result indisplacement of the material in process. The amount of movement varies dependingon the distance the collet must close before engaging the material.
To minimize tube motion during the open/closesequence, Aerotech’s LaserTurn 1 system keepsthe collet stationary and instead moves themating tapered surface. As the tapered surfacemoves to close the collet no linear motion isimparted in the tube. It is possible to make parts of
unlimited length through a cut-index-repeatsequence using this approach.
Floating ER Collet Captured Collet with Draw Bar
Captured Collet –LaserTurn 1
Closer movement
Tubemoves ascolletcloses
Draw bar andcollet move
Tubemoves ascolletcloses
Tapered surface moves
Colletstationary –no tubemotion
LaserTurn 1
10 www.aerotech.com
The ever-shrinking geometries ofelectronic components, coupled withadvances in battery technology, haveled to the development of a largearray of implantable medical devicesfor heart rhythm management(pacemakers, defibrillators) andchronic pain relief (neuro-stimulation).These products share a commonpackaging technique that consists of atitanium half-shell enclosure joinedtogether with a hermetic seam weld.The integrity of the weld is crucial toensure the long-term reliability of thedevice and to protect the patient fromcontamination. Traditional approachesto the welding process have utilizedstandard rotary and linear motiondevices coupled with complicatedpost-processing software to create theweld path. Aerotech’s HermeSys is aholistic design that optimizes allaspects of the hermetic seam-weldingprocess. Specialized mechanics areused to accurately position the deviceduring the welding process. Onboardkinematics allows the programming ofweld geometry in part space for rapidoptimization of process parameters onthe machine (no post-processingrequired). And finally, a referencedesign is available for an automatedmaterial handling system to ensurethat the part load/unload cycle cankeep pace with the optimized weldingprocess.
Solutions For
Hermetic Seam WeldingOptional dual-drive rotary assemblywith pneumatic clamp ensuresconsistent part engagement duringthe welding process
Optional kinematic part fixture withwide acceptance angles ensuresprecision alignment of the part forautomated load/unload processes
Rigid one-piece design tightlycouples the laser head with motionto eliminate weld path errorsinduced by differential motion inthe optics
11
Real-Time Kinematics
Real-time kinematics removes the need for complex post-processing tools tocreate multi-axis laser weld paths. The weld profile is programmed in linear/arcsegments or points on a cubic spline interpolated path. Part geometry andwelding speeds can be optimized on the machine without re-posting the weld
Split axis configuration consisting ofZ/rotary and X/Y stage assembliesallows for higher acceleration,throughput, and weld accuracy
Multiple mounting locations for theX/Y stage assembly support a widerange of focal lengths
Alternate configurations providemaximum flexibility when integratingwith existing material handling systems
Complex Programming Made Easy
Visit the Aerotech website for a videodemonstration of real-time kinematics.
12
Solutions For
Intraocular (IOL) andContact Lens ManufacturingLensPRO Series –Increasing Part Quality andSystem Accuracy
1
1
2
2
3
3
4
4
5
5
6
6
7
7
GoodBetter
Best
LensPRO-200•Spherical, aspherical
and toric profiles•Air isolation•Based on ALS5000CR
series stages
Part quality that exceedscompetitive air-bearingsolutions
LensPRO-300•Air-bearing slides•Spherical, aspherical,
toric and diffractiveprofiles
•Air isolation•Based on ABL1500
series stages
Part quality comparableto competitivehydrostatic bearings
Networked open control platformallows for easy expansion
Standard commercial PCtechnology running latestWindows® software
Lens profile manager softwarecreates programs in easily editableG-code programs
T-slot tool mounting interfaceallows for flexible tool placementand addition of custom tooling
Toric milling/drilling spindle, LVDTand fixed tool posts support a widerange of lens geometries
Closed loop air-bearing spindlewith unique bearing configurationgreatly improves surface finish
Granite mounting surface withpassive or air isolation provides astable platform for lathing process
LensPRO-100•Passive isolation•Mechanical bearing•Spherical and
Aspherical•Based on ALS2200
series stages
Ideal solution for costsensitive applications
www.aerotech.com
13
Component Solutions
ALS2200•Smooth, reliable crossed-roller
bearings capable of makinglenses with minimal polishingtimes
•Compact size reduces machinefootprint in space-constrainedcleanroom environments
•The ideal stage solution for highvolume, low-cost lens turningplatforms
ALS5000CR•High-precision crossed-roller
bearing stage capable ofproducing polish-free surfaces
•Large tabletop easilyaccommodates multiple toolsand measurement devices
•Larger stage cross-sectionprovides adequate stiffness fortoric lens profiling
ABL1500•Air-bearing stage completely
eliminates mechanical noisesources for the best possible lensquality
•Friction-free bearing allows forsmall step sizes making it the idealplatform for diffractive lensmanufacturing
•The high-accuracy linear encoderoperating at picometer resolutionminimizes profile errors whenturning complex lens profiles
Toric Lens Generator•Oscillating tool post designed specifically for toric lens profile•4 mm of total travel has adequate travel for the most complex profiles•Compact drive technology can be mounted inside the lathe machine base•Non-proprietary, open programming language allows for complete
customization of the lens surface profile•Significant cost and space savings over competitive solutions
Good Better Best
14 www.aerotech.com
Historically DNA and other reactive-agent-based analysis procedureshave used low-end positioningdevices such as stepper motors andbelt drives to distribute solutions intolow-density well plates. As theindustry has progressed to higherdensity plates with smaller samplesizes, more sophisticated motioncontrol technology has been requiredto increase the efficiency and reducethe costs of the test procedure.Likewise, newer luminance analysistools with extremely sensitive detectortechnology have placed morestringent requirements on the motionplatform in terms of positioningaccuracy, velocity stability, andflatness of travel. As a single-sourcemanufacturer of high-end motioncontrol equipment, Aerotech isuniquely positioned to providesolutions for the latest generation oflab automation tools.
Featuring/Recommendations:
•A3200 controller
•Linear motor gantries (AGS1000)
•Low-profile, linear motor,mechanical and air-bearing stages(ABL1000, ANT130-L)
ABL1000 Linear Stages
•Sub-micron flatness maintains focusover full travel
•Noncontact bearing allows forexcellent velocity stability toimprove image quality
•Picometer-level resolution allowsfor precise positioning on sub-micron probe densities
Solutions For
Next GenerationDNA Sequencing
Sub-micron sample density requires higher precision capabilities
ABL1000XY
15
Linear Motor Gantries
•Speeds in excess of 2 m/s enablehigh speed well-plate screeningapplications
•Gantries provide long travel forloading of multiple well-plates andeasy access for load/unloadoperations
•Direct-drive linear motortechnology and linear encoderfeedback mean a lifetime ofmaintenance-free operation
•An optional high-speedZ axis is available forrapid materialdeposition andinspection
ANT Series Stages
•Crossed-roller bearings haveexcellent in-position stability forpoint-to-point image acquisitionapplications
•Multiple lengths and stage widthsprovide a wide selection ofproducts for different sample sizes
•Nanometer-level step sizes enabletight probe spacingANT130-XY
AGS1500
16 www.aerotech.com
Bio printing, also known as tissueengineering, is an exciting newprocess that is being used tomanufacture functioning tissue forimplantation in the human body. Theprocess is similar to additive 3Dmanufacturing technologies that havebeen used in rapid-prototypingmachines where structures are builtlayer-by-layer. For bio-printingapplications the material beingdeposited consists of biological cellsthat fuse together to form tissues thatcan be implanted in the body. Theprocess can be used to manufactureblood vessels, bone, teeth, andultimately entire replacement organs.
Solutions For
Bio Printing
The bio printing process consists of building 3D objects in layers. Cells deposited next to each other fuse together to form the desired tissue. Aerotech’s PositionSynchronized Output (PSO) capability ensures uniform tissue density with sub-micron placement accuracy during the deposition process.
1 2 3 4
Aerotech motion products are already being used in a variety of additive manufacturing applications.This application, at The Wake Forest Institute for Regenerative Medicine, shows a 3D printer that canconstruct nose scaffolding – simultaneously embedding it with cells that will later grow into tissue.
17
Compact, high-precision X/Y stages minimize machinefootprint while providing sub-micron placementaccuracy
Gantry configuration provides maximumflexibility for integration of printing substrates
PC and stand-alone control solutions provide multiple price/performance points.
Aerotech can provide numerous key components for an automated CAD-to-tissue generation platform.(Photo courtesy of Lee E. Weiss, Ph.D., The Robotics Institute, Carnegie Mellon University, Pittsburgh, Pennsylvania)
Aerotech Technology in BioPrinting
•Cartesian X/Y/Z actuator toposition dispensing head
•Flow and temperature control to regulate material dispense rate and viscosity
•Advanced motion profilingcapabilities allow for easyrealization of complex partgeometries
Multi-axis machine controller
®™
Stand-alone multi-axis motion controller
ANT130-XYAGS1500
18 www.aerotech.com
Life happens at the sub-micron level.Observing and manipulatingbiological processes in applicationssuch as micro-robotic cellmanipulation, DNA sequencing, andmicroscopy therefore require motionon the sub-micron level. Some of thesemolecular-scale processes must alsobe capable of moving in the tens ofmillimeters to access multiple siteswithin a given sample or within anarray of samples. Aerotech’s line ofnanopositioning stages, with theirnanometer-level step sizes coupledwith millimeter travel ranges, areideally suited for these applications. Acomprehensive line of linear, rotary,and vertical displacement stages areavailable to create complex multi-dimensional motion platforms for theanalysis and manipulation of cellularfeatures and processes.
Solutions For
Molecular-Level Life Sciences
Cell penetration requires sub-micron probepositioning to control depth of penetration tominimize damage to the underlying cellularstructure
1000 µm
Can be seen with
Human eye
Human cells
Bacterial cells
Viruses
Diameter ofperiod at endof sentence inthis text.
Typicalhumancell
MitochondrionLysosome
Ribosome
Plasmamembrane
Proteinmembrane
Hydrogenatom
Light microscope
Electron microscope
100 µm 10 µm 1.0 µm 0.1 µm 0.01 µm 0.001 µm 0.0001 µm
Plasmamembrane
Cell Structure
Golgi complex
Smoothendoplasmicreticulum
Rough endoplasmicreticulum
Nuclear EnvelopeChromatin
Nucleolus
Nuclear Pore
Nucleus
Microfilaments
Microtubule
CentrioleMitochondrion
Cytoplasm
Ribosomes
19
ANT95-L Single-AxisLinear Stage
•Noncontact, non-cogging,frictionless direct-drive – zerobacklash or hysteresis
•High resolution (1 nm),repeatability (50 nm), andaccuracy (250 nm)
•In-position stability of <1 nm
•Anti-creep crossed-roller bearings
•High dynamic performance
•Available in X, XY, XYZ, and manyother combinations
ANT95-R and ANT130-RRotary Stages
•High resolution (0.01 arc sec)
•High performance in large travels
•Outstanding error motionspecifications
•0.005 arc-second in-positionstability
•5 arc-second accuracy
•1.5 arc-second bi-directionalrepeatability
•Multi-axis configurations
ANT95-50-L-PLUS 1 nm step plot
ANT95-R 0.01 arc-sec step plot
The ANT95-L series offers25 or 50 mm travel
Visit Aerotech’s website for a complete listing of all our nano Motion Technology products.
20 www.aerotech.com
Solutions For
Medical Devices, Oncology and Imaging
Slotless Motors for Imaging andDiagnostic Equipment
•High inertia slotless configurationmore closely matches performancecharacteristics of traditional brushmotor technology
•Excellent velocity stability forpatient movement or positioning ofdiagnostic/treatment sources
•Brushless design ensures a lifetimeof maintenance-free operation
•Slotless, brushless stator provideszero cogging torque
Frameless Torque Motors
•Five frame sizes to fit mostapplications
•Frameless design for easyintegration into OEM machines
•Slotless stator and high-pole-countrotor provide zero cogging forexceptional velocity and positioncontrol
•Up to 116 Nm of peak torque and29 Nm of continuous torque
Brushless Rotary Motors
•Standard NEMA sizes ensureportability with existing mechanicalinterfaces
•Frameless torque motors forintegration into custom rotaryactuators
•Slotted and slotless designs allowoptimization for torque capacity orvelocity ripple
•Multiple frame sizes to fit almost anyapplication
Brushless Linear Motors
•Advanced design yields 49%greater continuous output thancomparative models
•Zero-cogging allows smoothvelocity and position control
•Symmetrical mounting patternallows tracks to be mounted end-to-end for unlimited travel
•Optional air cooling forgreater rms force
•Up to 4252 N of peak force and1063 N of continuous force
Many complex medical devicesrequire a variety of motors and othermotion components for an array oftasks. Reliability and ease ofintegration are key to effectivelybuilding the highest quality machinesas required in the medical industry.Aerotech offers a wide range ofstandard motors that can be selectedto best fit your application.
21
LINAC (Linear Accelerator) systemsdirect a shaped beam of radiation ata tumor from different angles tominimize damage to surroundingtissue. Aerotech motors and controllersare used to provide precisepositioning of the patient relative tothe radiation source.
•Low-cogging-torque brushlessmotors are ideal for patientmovement, LINAC source, orcomputed tomographysource/sensor
•Optional absolute rotary encoderfor power-on identification ofsystem orientation
•Custom linear positioning systemscan be designed to meet space andperformance constraints
•Single-axis control with multi-tasking programming environmentgreatly simplifies motion and safety-related programmingfunctions
•Distributed control architecture with ethernet or USB interfaceminimizes wiring complexity
•DC input option allows for “battery backup” powered operationto safely move patient in the event of primary AC power loss
Computed Tomography (CT) scannersrotate an X-ray source and imagingsystem at high speeds to generate 3Dimages of the body. Aerotechcontrollers and motors are used toensure tight correlation of the patientposition relative to the imageacquisition locations to improve finalimage quality.
Stand-alone, single-axis motion controller
22 www.aerotech.com
Control Solutions
Diagnostics – Easily debug your system Loop Transmission – Quickly set up system Autotune – Shortens development time
Automation 3200
•Software-based multi-axis machine controller
•1 to 32 axes of coordinatedmotion
•PC-based
•Up to 32 tasks
•RS-274 G-code
•Advanced features for demandingapplications
•Scanner control for marking
•Tightly integrated laserfunctionality
•Retrofit package
•Brushless, brush, or stepper motors
Common Software Platform: Tools, Powerful Programming Environment, Calculators, Diagnostics
Award-Winning Controllers
Accessories
•High Performance
•Flexible
•Advanced ControlTechnology
•Networked
•Scalable
•Lowest Cost ofOwnership
23
PID Calculator – Optimize system performance Encoder Tuning – Minimize development cost Motion PAC – Optional IEC 61131-3programming environment
Ensemble
•Stand-alone 1- to 10-axis controller
•Up to 4 tasks
•Versatile, cost-effective, coordinated motion
•PWM or linear drives (10-150 A peak)
•Brushless, brush, or stepper motors
•Desktop or panel mount
•.NET, Managed C++, LabVIEW®, or AeroBasic™
Soloist
•Elegant, economical, single-axis controller
•Stand-alone
•PWM or linear drives (10-150 A peak)
•.NET, C#, VB.NET®, LabVIEW®, orAeroBasic™
•Ethernet, USB
• Brushless, brush, or stepper motors
Network Connectivity
•Ethernet/IP™
•Modbus®/TCP
•Ethernet TCP/IP
•USB
•RS-232
•GPIB
Linear and Rotary Servomotors
24 www.aerotech.com
Slice Move Axis Calibration Gantry Mode
Parts Rotation Cutter Compensation Velocity Profiling
Seven Segment Acceleration Velocity Blending Orthogonality Correction
Increase scanning throughput by blending stepand scan into a contoured move
Compensate for repeatable mechanical errors ina positioning system
Complex gantry control is reduced to a few simplecommands to handle dual motor and/or dualfeedback configurations
Use when a two-dimensional part must berepeated in different orientations withouttranslating the part program many times over
Also known as tool radius compensation, thisfeature automatically adjusts the path to allow forthe radius of a cutting tool
Maintains a constant vector velocity along theprogrammed path
Specify the acceleration profile in seven segments,providing precise control over system motion
The velocity changes to the next velocitycommand, acceleration limited, without stopping
Improve X-Y planar accuracy by simply enteringthe known orthogonality error and the controllerwill compensate
Aerotech controllers offer the broadest array of programming interfaces and core motion capabilities of any automationsystem available today. Aerotech controllers have the programming flexibility and capability to meet the requirements of themost demanding motion applications of OEMs and end-users alike.
Control SolutionsStandard Controls
25
Harmonic Cancellation Iterative Learning Control ETM
Directional Gain Scheduling Friction Compensation Position Synchronized Output
Motion Designer Loop Transmission
Reduce position error on periodic trajectories andreject periodic disturbances
Reduce following error on repeated movesequences that can be learned and optimized
Increase rate stability and decrease settle times inthe presence of vibration
Decrease settle-time and increase in-positionstability
Reduce settle time and reduce error at directionreversals
Trigger external events precisely at desiredposition while in motion
Graphical trajectory generation and data analysis Tuning and diagnostic utility that greatly enhancessystem performance
CADFusion
Aerotech’s CADFusion software enables users toquickly and easily convert DXF/DWG drawingsinto AeroBasic motion programs that can be runon a number of Aerotech control systems.
Advanced Controls
26 www.aerotech.com
MotionPAC – PLC Integrated With Motion•30% to 50% reduction in development time
•High-performance motion fully integrated with standard PLCenvironment
•Easy-to-use diagnostics and tools
•Standards & flexibility: IEC 61131-3, .NET, PLCopen, PC-based
•Integrated with the A3200 motion controller
Program in IEC 61131-3: LD, FBD, ST
Define hardwareOnline mode displays all Tag values
Axis manager Standard LDCreate libraries
Combine LD and FDon same program
Completely integratedmotion blocks
Tag databaseLD, FBD or STprograms
27
Integrated Automation: MotionPAC
MotionPAC•IEC 61131-3•PLCopen•Aerotech motion blocks•Axis manager•Extensive development & debug environment•Simulate program
Motion Composer•Axis manager•Low-level motion diagnostics•Motion programming•Advanced control algorithms
Scope•Signal capture & analysis•Autotuning•Loop transmission•Encoder tuning•Advanced controls
HMI•Program selection and run•Jog panel•Machine control•Customizable buttons•Axis manager
I/O & Data Acquisition•High-speed data acquisition synchronized
with motion & PLC•High-speed registration•Position Synchronized Output•Machine interlocks•Fieldbus I/O
Central Machine Tag Database•Tags available in all applications by name•Define both local or global machine Tags•Define Tags in I/O definition, ST, LD, FBD or
motion program
28 www.aerotech.com
Linear Servo Amps for High Accuracy and Ultra-Low Jitter Operation
Aerotech’s linear servo amplifiers arefor motion control applications thatrequire high accuracy drives with noPWM switching noise and zerodeadband. Because the linear servoamplifiers have no PWM switchingnoise, they do not induce electricalnoise into sensitive electricalmeasurement devices.
Improved Dynamic TrackingAccuracy
Aerotech’s linear amplifiers have nodead band or cross over distortion asthe current changes direction. Thisresults in a significant decrease inposition error during directionreversal. With linear amplifiertechnology it is possible to maintainmicron level dynamic positioningtolerances without having to reducespeed on small arcs and circular partfeatures.
Linear Amplifier Advantages
•No switching noise
•Zero dead-band
•±40 V, ±60 V, and ±80 V outputvoltage
•Peak output current up to 20 amps
•Continuous output current up to 10 amps
•Software selectable power amplifierbandwidth
Advanced System Controls
Ensemble HLe
Ndrive HLeSoloist HLe
NpaqEnsemble CL
Soloist ML
29
PWM Amplifiers, 10 A - 150 A Output
Aerotech PWM digital servo amplifiers arecapable of controlling brushless, DC brush, andstepper motors over a wide range of operatingvoltages and currents. Based on a commonarchitecture, these amplifiers perform bothcurrent- and position-loop closures digitally.
The use of high-performance double-precisionprocessors allows these drives to generate ultra-smooth motion profiles. Servo system response isoptimized with the use of up to eight second-order loop-shaping filters, precise time-alignedfeed-forward and other proprietary techniqueswith loop closure rates up to 20 kHz.
The PWM family is offered in a number of highlyefficient versions. The MP is a low power, smallfootprint PWM drive ideal for space-sensitiveapplications. The CP is a medium-power PWMdrive capable of running directly from AC mainsvoltage and is optimized for cost-sensitiveapplications. The HPe is the highest performancePWM drive providing a host of features notavailable on the other PWM drives, and isavailable in output current ranges from 10 A to150 A peak.
Options for Aerotech PWM amplifiers includeintegral encoder interpolation, one- to three-axisPosition Synchronized Output (PSO), automaticbrake control, digital and analog I/O expansion,absolute encoder interface, and one- or two-channel resolver interfaces. An optionaldedicated Ethernet port is available on the HPedrives for connection to third-party I/Oexpansion devices.
Ensemble MP
Soloist CP
Ndrive HPe
30 www.aerotech.com
PRO LM Series
•Direct-drive linearmotor for zero-cogging, high-performance motion
•External mountingfeatures for quicksystem assembly
•Hard-cover andside-seal design foryears ofmaintenance-freeoperation
•High accuracy linearencoder option forapplications thatrequire excellentvelocity regulation
•Multiple frame sizesand travel lengthsprovide systemconfigurationflexibility
PRO Series
•Side-seal design withhard cover for debrisprotection
•Long-life linearmotion guide bearingsystem
•Available withbrushless, DC brush,or stepper motors
•Choice of ball screwsfor speeds up to1400 mm/s
ABL1000
•Noncontact air-bearingtechnology withmagnetic preloadyields a smallfootprint for space-constrainedapplications
•Excellent flatness ofmotion for small focaldepth systems
•Optimized for singleaxis or short travelX/Y configurations
ABL1500
•Full air preload forincreased roll stiffnessand higher loadcarrying capability
•Two frame sizesallow for increasedload carryingcapacity in X/Yconfigurations
•Optional high-accuracy encoder forimproved velocitystability
ABL8000
•Active air-bearingpreload on allsurfaces provideshigh stiffness forheavy loads
•Wide footprintideally suited for X/Yapplications
•Choice of standard, high accuracy, andlaser interferometerfeedback devices
Linear Stages and Gantries
31
ABL9000
•Full air preload on allsurfaces for increasedroll stiffness and loadcarrying capacity
•Co-planar X/Y axesreduce workingheight to minimize rolland pitch errors
•Exceptionalstraightnesscharacteristics forhigh-accuracy laserscribing applications
AGS1000
•Compact designminimizes floor space
•Well-suited formarking “move andexpose” operations
•CMS expandable tointegrate fiber-laserbeam delivery
•Optional machinebase and risers easesystem integration
AGS10000
•Large format gantrywith high force linearmotors well-suited forlaser cutting andwelding applications
•Stacked X/Yconfigurationprovides clearancefor laser optics andmaterial handlingwithin the operatingenvelope
•Scalable cablemanagement systemallows for integrationof focus axis andfiber-laser beamdelivery
AGS15000
•Planar X/Y designimproves systemstiffness to minimizecontour errors in high-speed cutting andwelding processes
•Planar design easilysupports theintegration ofcomponents for“flying optics”applications
•Scalable cablemanagement systemallows for integrationof focus axis andfiber-laser beamdelivery
Cartesius
•T-style gantry allowsfor clear access onthe side of themachine for materialload/unloadoperations
•Standardconfigurations includeleft- and right-handed, XY, XYZ, andXZ systems
•Multiple stage widthsavailable to optimizefootprint and loadcapacity for a widerange of applications
32 www.aerotech.com
Rotary Stages
ADRS
•Ultra-low profileminimizes workingheight
•Cog-free slotlessmotor design foroutstanding velocitystability
•Direct-coupledencoder for accuratemeasurement of tableposition
•Multiple frame sizesfor applicationflexibility
ADRT
•Large diameter,clear-aperture forproduct feed-throughor laser beamdelivery
•Wide bearingseparation forimproved momentload capability
•Outstanding wobbleand runoutcharacteristics
•Four different framesizes with multiplestack heights providea wide range of loadcarrying capabilitiesand output torques
ACS/ACS LP
•Integral pneumaticER collet holder or 3-jaw chuck forautomated materialhandling
•Clear aperture forproduct feed-through
•Normally-open ornormally-closedgripper options forfail-safe materialholding
•Frictionless rotaryunion provides alifetime ofmaintenance-freeoperation
ALAR
•Direct-drive, large-aperture rotary stageeases integration oflaser beam deliveryor custom part fixtures
•Limited-travelversions available tosupport specializedmachineconfigurations
•Large bearingsprovide high payloadand moment loadcapability
•Five differentaperture sizesranging from 100 mmto 325 mm formaximum flexibility
ASRT
•IP66: Totallyprotected against dustand water jets fromany direction
•Direct-drive motorprovides rapidprecision motion withno gear backlash
•Low-friction sealminimizes directionreversal hysteresis toallow small, precisepositioning
•Continuous or limitedtravel
•Axial load capacityup to 175 kg
•Excellent accuracyand repeatability
33
AGR
•Gear-driven rotarystage with largeaperture easesintegration of laserbeam delivery orcustom part fixtures
•Direct-coupled outputencoder for improvedpositioning accuracy
•Innovativepreloading designlengthens worm-gearlife
•Range of gearingoptions and aperturesizes providesconfigurationflexibility
ALAG
•Large format, gear-driven goniometersupports loads up to1500 lb
•Two frame sizes witheither 1300 mm or300 mm radius forsystem configurationflexibility
•Direct feedbackencoder option forhigh-accuracyapplications
•Standard NEMAmotor mount supportsbrush, brushless, andstepper motors
ABRS
•Low profileair-bearing minimizesstack-up relatederrors in multi-axissystems
•Zero cogging, direct-drive motor for ultra-smooth velocityregulation
•Large air-bearingsurfaces provide highstiffness and loadcapacity withexcellent axial andradial error motions
•Clear aperture forproduct feed-through
ABRT
•Fully constrainedrotary air-bearingdesign for high-moment-loadapplications
•Large diameter clearaperture for productfeed-through
•Zero cogging, direct-drive motor for ultra-smooth velocityregulation
•Three different framesizes for systemconfigurationflexibility
34 www.aerotech.com
Worldwide startupservice and on-sitetraining
Fully equipped on-sitetraining facilities
Worldwide Service and SupportHigh Volume Manufacturing
Over 100,000 axesinstalled worldwide
Aerotech at a Glance
Corporate Headquarters • Pittsburgh, PA • USA
Aerotech United Kingdom
AerotechGermany
AerotechJapan
Aerotech China
Aerotech Taiwan
35
Technically SuperiorComponents
High Performance Sub-Assemblies
Best-in-Class Subsystems Comprehensive Technical Support Services
Custom softwareapplication support
Advanced analyticaltechniques for optimizationof system geometry
3D models to facilitate fasterand more accurate system layout
PRO series linear-motorstage
Highestperformancebrushless linearand rotary motors
Award-winning Automation 3200 1-32 axis mo-tion, vision, PLC, robotics, and I/O platform
Highly integrated motion subsystemswith machine base, display, andpackaged electronics
Custom-engineered vacuum- andcleanroom-compatible systems
Production-proven,large format air-bearing systems for flatpanel andsemiconductorapplications
Ndrive A3200 Npaq
LaserTurn 5 high-speed cylindricallaser cutting system
Highest throughput linear motor Cartesian gantry systems
XYAB subsystem for highdynamic accuracypositioning in laserdrilling andmicromachiningapplications
AGR rotary stage
36 www.aerotech.com
Engineered SystemsAerotech engineers and manufactures specialty high-performance subsystems. Our highly-trained staff of experiencedsoftware and hardware engineers enables our customers to get to production readiness faster. Aerotech provides real-timecollaborative support — either at your facility, at our facility, or on the web.
Ion Beam Profiling in Vacuum
Advanced Laser Machining Discrete Part Milling Machine
Liquid-Cooled, Vacuum-Prepped System
Precision Optical Production High-Precision Air Bearings
Rapid Prototyping Advanced Pick-Place-Inspect Station
Patterned Media Inspection
High Volume Production Inspection Station
4-Axis Coordinate Measuring Machine
Optical Lens FabricatingPrinthead Inspection Station High-Accuracy Laser Machining
Electronic Inspection High-Speed Optical Indexer
37
Semiconductor International 2007 Editors’ Choice Best Product –
WaferMax T™
Semiconductor International
2008 Editors’ Choice Best Product –
Ensemble™
2008 Control EngineeringEngineers’ Choice Award
– LaserTurn® 1
2011 Control EngineeringEngineers’ Choice Award
– ANT130-XY
Design News2008 Golden Mousetrap Finalist Product –
Nmark™ SSaM
Design News2009 Golden Mousetrap Finalist Product –
LaserTurn® 1, AGS15000, ANT95-XY
Design News 2010Golden Mousetrap Winner –
ANT130-XY
EuroAsia IC 2006 Industry Award –
WaferMax Z™
Lightwave OFC 2001 Attendees’ Choice Award –
FiberAlign® 130
Design News 2002 Best Product Nominee –
Automation 3200
Machine Design Excellence in Manufacturing Technology –
Slides/Ways 1998 and 2000
Aandrijftechniek 2002 Award –
FiberMax®
Product Design and Development 2002 Top 50 Product –
Automation 3200
Lightwave NFOEC 2002Attendees’ Choice Award –
FiberMax®
Awards and Recognition
2012 Control Engineering Engineers’ Choice Award
Finalist Product – MotionPAC
2013 Golden MousetrapFinalist Product – PlanarDL
38 www.aerotech.com
Capabilities in Other Markets
Photovoltaic, Fuel Cell and Alternative EnergyExtensive application experience and a broad array of motionproducts make Aerotech the perfect partner for your photovoltaic(solar cell), fuel cell and other alternative energy manufacturingand testing platforms. Our worldwide operation has engineeredand manufactured a multitude of motion platforms for thesemarkets and we continue to provide innovative solutions.
Control SystemsAerotech motion controllers, motors and drives are utilized in our ownpositioning systems and by end users and OEMs worldwide. From ourAutomation 3200 software-based motion controller that can control upto 32 axes, to the Soloist single-axis servo controller, to the Ensemblemulti-axis stand-alone motion controller, we provide a variety of optionsto suit your application.
General AutomationSince 1970 Aerotech has been a manufacturer of top-quality automationproducts. The breadth of our product line, including automatednanopositioners, planar air-bearing systems, high-speed gantries, linear androtary and lift stages, brushless linear and rotary servomotors and drives,single- and multi-axis motion controllers, goniometers and gimbals/opticalmounts makes Aerotech unique among motion control manufacturers.Aerotech is Dedicated to the Science of Motion.
Laser ProcessingAerotech has extensive experience in providing motion componentsand subsystems for laser processes such as cutting, welding, marking,etching and micromachining. These processes are the key toadvancing technology in markets such as photovoltaicmanufacturing, aerospace and medical device manufacturing.
39
Military and AerospaceAerotech has manufactured thousands of high-accuracy systems includingmany for high vacuum (10-6 torr) and cleanroom environments. Ourequipment is used for testing electro-optic systems, high-performance laserprocessing, materials testing and manufacturing, target tracking, satellitesensor calibration and verification, inertial guidance testing, scanning,optical pointing, repeatability and life-cycle testing for quality control.Custom systems are available with minimal development time.
Government and Educational Research and DevelopmentThe breadth of Aerotech’s product line offers solutions for the wide-ranging requirementsof academic and government R&D. Our nanopositioners provide the accuracy requirednot only for photonics experiments, but also for micro- and nanomachining workstations.Aerotech’s multi-axis rotary positioners and gimbals offer the high precision needed fordefense, satellite and space science research. Unique applications call for uniquesolutions, and Aerotech can provide custom-engineered systems to meet your needs.
Electronics Manufacturing and AssemblySpeed, accuracy and reliability are the key requirements for pick-and-placemachines, stencil cutting machines, printed circuit board assembly and otherelectronic manufacturing and assembly equipment. Since 1970 Aerotech hasexceeded the most stringent criteria used to judge electronic manufacturing andassembly equipment, and we continue to raise the standard with our advancedmotion technologies by addressing industry-specific challenges in pick-and-placemachines, stencil cutting machines and printed circuit board assembly systems.
Test and InspectionAerotech is involved in test and inspection across a wide array ofindustries with applications including CMMs, ultrasonic, eddy current,x-ray, optical, and electronic. All of these applications rely on Aerotechproducts’ unmatched precision, accuracy, and durability. Opticalinspection solutions range from high-end linear-motor-driven modelspackaged with all control elements in an optimized machine base, tomodular systems specifically designed for cost-sensitive applications.
H - Aerotech Headquarters l - Direct Field Sales Office s - Aerotech Subsidiary n - Representative
Dedicated to the Science of Motion
www.aerotech.comCA0314A
Aerotech’s Worldwide Sales and Service Locations