Download - ASYMMETRIC SYNTHESIS OF BIOACTIVE POLYOLS
ASYMMETRIC SYNTHESIS OF BIOACTIVE POLYOLS
By
SUCHETA CHATTERJEE
CHEM 01201004001
BHABHA ATOMIC RESEARCH CENTRE
A thesis submitted to
the
Board of Studies in Chemical Sciences
In partial fulfillment of
requirements for the Degree of
DOCTOR OF PHILOSOPHY
of
HOMI BHABHA NATIONAL INSTITUTE
November 2014
Dedicated to…….Dedicated to…….Dedicated to…….Dedicated to…….
…………………….Maa, Baba, Joy.Maa, Baba, Joy.Maa, Baba, Joy.Maa, Baba, Joy
…………And toAnd toAnd toAnd to all those who love me all those who love me all those who love me all those who love me and motivate me to dream big…and motivate me to dream big…and motivate me to dream big…and motivate me to dream big…
ACKNOWLEDGEMENTS
I would like to start by thanking my PhD guide, Prof Subrata Chattopadhyay (Head, Bio-
Organic Division, BARC) who has been the most influential person in my life since I joined
BARC. His continual support, advice, encouragement, criticism and selfless ways in dealing
with issues are very inspiring. All these have made me a stronger and better person both
professionally and personally. I feel lucky that he gave me a chance to join his research group
a few years ago and it has been a privilege working under his guidance since.
Next, I would like to acknowledge the contributions of my immediate superior, Dr.
Anubha Sharma in my life and career. Her valuable inputs, extraordinary tenacity, pleasing
personality, and never-give-up attitude and faith in me has helped me come a long way, not
to forget her indispensable advices in times of crisis.
I would like to express deep gratitude to my doctoral committee chairman, Prof. T.
Mukherjee, doctoral committee members Dr. S. K. Ghosh, Dr. A. Chattopadhyay and Dr.
Sharmila Banerjee for their valuable time and suggestions which helped me improve the
quality of my research work. Thanks are due to Dr. S. K. Nayak, Dr. B. S. Tomar (Dean,
Academic, Chemical Sciences, HBNI), Dr. Swapan K. Ghosh for their help and guidance. Dr.
Alok Samanta deserves special mention in my life since the early days of BARC Training
school. I will treasure his love, guidance and advice all my life.
The cheerful presence and friendship of my labmates and colleagues made those long
hours I spent in the lab. cherishable one. These wonderful people are Sunita, Akhil da,
Dibakar da, , Seema, Ajish sir, Sneha, Bhaskar da, Neeta mam, Papiya, Sampada, Payel,
Trilochan da, Siba, Raghu da, Ankur, Brindavan, Rekha mam, Soumu, Gangababu,
Minakshi, Shikha, Prasad da, Siddharth da, Sandeep, Shitaljit, Kshama di, Mrunesh, Manoj,
Kavita, Abha mam, Mrityunjay, Saikat, Jitesh sir, Soumya da, Patro sir, Mahesh sir,
Rangarajan. I appreciate the administrative help extended to me time and again by Vasavan ji
and Yadav ji.
I gracefully acknowledge the contributions of all the teachers/professors in my
school/university who have played an pivotal role in my life. I am fortunate to have a loving
friend in Nabanita. Thanks are due to my school buddies Shreya, Koeliya and Annie for
giving me those fun and joyous moments and standing by me in times of need. I would like
to convey my deepest love and regards to my childhood friend Munia for constantly
motivating me to aim higher. I would never forget the concern and affection shown by Mr.
and Mrs Arya and Mr and Mrs. Thankarajan. I would like to thank my in-laws who would be
really proud of me when I finally complete my doctorate.
Thank you is too small a word for my companion and husband, Agrim whose deep love,
support, critical comments, useful and practical tips and fun-loving nature has helped me
cope the ups and downs of life and made me stronger. This journey of life wouldn’t have
been possible without your sacrifices and patience.
And finally I have saved the best for the last. I would like to thank god for being
really partial to me and blessing me with truly wonderful parents and brother. I am what I am
because of them. Words fail me to express my gratitude towards my maa (Mrs. Kanchan
Biswas) and baba (Dr. Subrata Biswas) for their unparalleled and unconditional love,
patience, sacrifice, hard-work, effort to instill good moral values in me and giving me a very
good life and upbringing. Lastly I want to convey my deepest love and gratitude to my
brother, Joy (Sudipto Biswas) for being there for me always. His wisdom, philosophy of life,
dynamic outlook and immense faith in me makes me embrace life more positively each day.
Thank you all for everything.
……..SuchetaSuchetaSuchetaSucheta
CONTENTS
Page No.
SYNOPSIS i-xii
LIST OF FIGURES xiii-xiv
CHAPTER I Introduction to asymmetric synthesis and polyols
I.1. Preamble 1
I.2. Key aspects of asymmetric synthesis 3-16
I.2.1. Importance of chirality on bioactivity 3-5
I.2.2 .Strategies of enantiomeric synthesis 5-14
I.2.3. Strategies for determination of enantiomeric
purities 14-16
I.3. Biocatalytic organic reactions 16-21
I.4. An overview of aliphatic polyol derivatives 21-22
I.5. Objectives of the present work 22-23
CHAPTER II Glyceraldehyde-based asymmetric synthesis of
some target aliphatic polyols
II.1. Total synthesis of oxylipin 24-35
II.1.1. Introduction 24
II.1.2. Previous syntheses 25-26
II.1.3. Present work 27-35
II.2. Asymmetric synthesis of the hydroxyl acid
segment of schulzeines B and C 36-45
II.2.1. Introduction 36-37
II.2.2. Previous syntheses 37-38
II.2.3. Present work 39-45
II.3. Experimental section 45-63
CHAPTER III Chemoenzymatic syntheses of two macrolides
III.1. Enantiomeric syntheses of the macrolide
Antibiotic (-)-A26771B 64-82
III.1.1. Introduction 64
III.1.2. Previous syntheses 64-67
III.1.3. Present work 68-82
III.2. Diversity-oriented synthesis of pyrenophorol
enantiomers 83-103
III.2.1. Introduction 83-85
III.2.2. Previous syntheses 85-89
III.2.3. Present work 90-103
III.3. Experimental section 103-143
CHAPTER IV Bibliography 144-155
SYNOPSISSYNOPSISSYNOPSISSYNOPSIS
i
Preamble
Given the importance of stereochemistry in biological recognition, the significance of
asymmetric synthesis has become overwhelming in modern organic synthesis. As a result,
development of asymmetric synthesis has become a central theme in contemporary synthetic
organic chemistry.1 Aliphatic polyhydroxy compounds, in particular, the polyhydroxy acids
and the corresponding macrolides are of wide natural occurrence, and often show impressive
anti-cancer, antiviral, antifungal as well as vaccine adjuvant activities.2
In view of these, the
present work was focused on the development of operationally simple and practical
asymmetric methodologies that were used to devise novel syntheses of a few chosen target
compounds of this class. These are presented in the thesis in three chapters as detailed below.
The bibliography is presented in Chapter IV.
CHAPTER I: INTRODUCTION TO ASYMMETRIC SYNTHESIS AND POLYOLS
This chapter deals with a broad review on asymmetric synthesis. The features covered
include (i) genesis and importance of chirality; (ii) different methods of enantiomeric
syntheses with special emphasis on asymmetric transformations; (iii) thermodynamics and
kinetics of preparing stereomers; and (iv) methods of assessing enantiomeric purities. This is
followed by a concise account of biocatalytic organic transformations.3 In addition a brief
summary of the natural polyols with special emphasis on the chosen targets is presented.
Finally, the objectives of the present work are enumerated.
CHAPTER II: GLYCERALDEHYDE-BASED ASYMMETRIC SYNTHESES OF
SOME TARGET ALIPHATIC POLYOLS
This chapter deals with the syntheses of two chiral aliphatic polyols using (R)-2,3-
cyclohexylideneglyceraldehyde (1), obtained from D-Mannitol as a chiral template. These
include (i) the oxylipin I, isolated from D. loretense, used to reinforce the immune system of
ii
the AIDS patients,4
and (ii) the C-20 fatty acid segment II of schulzeines B and C, which
inhibit yeast α-glucosidase and viral neuraminidase.5
(i) Total Synthesis of Oxylipin
We have developed a simple and efficient asymmetric synthesis of the acid I using a
“building-block” approach (Figure 1.). The chiral building blocks A and B were synthesized
starting from the aldehyde 1 by addition of two different organometallic reagents to generate
the stereogenic centres of I. These were coupled via a cross metathesis reaction6 to install the
7E-olefin function of the target oxylipin.
The synthesis commenced with a highly diastereoselective Ga-mediated allylation of 1 in
[bmim][Br]7 furnishing the corresponding anti-homoallylic alcohol, which was converted to
iii
the ester 2 by protecting the alcohol group as the tert-butyldiphenylsilyl (TBDPS) ether,
hydroboration-oxidation of the olefin function, subsequent oxidation with pyridinium
chlorochromate (PCC) and a base-catalyzed Horner-Emmons reaction with triethyl
phosphonoacetate. After catalytic hydrogenation, the product was deacetalized with aqueous
trifluoroacetic acid (TFA) to furnish the diol, which on ditosylation with p-toluenesulphonyl
chloride (p-TsCl)/pyridine followed by heating with NaI/Zn-dust afforded the alkene ester 3
(building block A). For the synthesis of block B, the aldehyde 1 was reacted with
CH3(CH2)7Li to furnish the anti-C11 alcohol almost exclusively (dr = 95:5), which was
silylated to give 4. Its TFA-catalyzed deacetalization, followed by tosylation of the primary
carbinol group and subsequent base treatment furnished the epoxide 5. This on an n-BuLi-
catalyzed reaction with Me3SI afforded the allylic alcohol 6. Finally, a cross-metathesis
between the ester 3 and 6 in the presence of Grubbs' II catalyst, followed by a F--mediated
desilylation and alkaline hydrolysis furnished I (Scheme 1).
(ii) Synthesis of the Schulzeines B and C Fatty Acid Chain Segment II
Retrosynthesis of schulzeines B and C suggested the C28 fatty acid ester II as the
target polyol intermediate that on amidation with the required isoquinoline core and a late
stage trisulfation would provide the schulzeines. Hence, a convergent synthesis of II was
iv
conceived using a cross metathesis reaction6 between the building blocks C
1 and C
2 (Figure
2.), which were synthesized by a biocatalytic route, and using the aldehyde 1 respectively.
For the synthesis of II, the diol 7 was converted to the allylic alcohol 8 by monosilylation
followed by a PCC oxidation and reaction with vinylmagnesium bromide. Its Novozym 435®
(lipase)-catalyzed trans-acetylation with vinyl acetate furnished (S)-9 and (R)-8 in 96% and
91% enantiomeric excesses (ees) respectively at 50% conversion. Desilylation of (S)-9 with
Bu4NF furnished the corresponding primary alcohol, which on PCC oxidation and subsequent
Wittig-Horner reaction with triethyl phosphonoacetate afforded the conjugated ester 10
(equivalent to C1
synthon). In a separate sequence of reactions, the aldehyde 1 was reacted
with CH3(CH2)9Li to furnish the anti-triol derivative 11 (dr: = 96:4). This was converted to
the epoxide 12 by benzylation, acid-catalyzed deacetalyzation, monosilylation of the resultant
diol at the primary carbinol site, mesylation of the other alcohol function, acid-catalyzed
1
HO(CH2)12OH
7
vii
12 13
iv
xiii
(CH2)11OTBDPS
OH
(+)-8 R = H(S)-9 R = Ac
i-iii
(CH2)9CH3
OBn
Oxii (CH2)9CH3
OBn
OH
(CH2)10
OAc
HO
CH3(CH2)9
OBn
v,ii (CH2)10
OAc
CO2Et
10
Scheme 2.
vi
14
i) TBDPSCl/imidazole/DMAP/CH2Cl2/25oC/8 h (68%), ii) PCC/NaOAc/CH2Cl2/25
oC/3 h (8: 92%; 10: 88%),
iii) CH2=CHMgBr/THF/25oC/6 h (77%), iv) Vinyl acetate/Novozym 435/25 oC/26 h (50%), v) Bu4NF/THF/0
to 25 oC/ 3 h (93%), vi) NaH/THF/(EtO)2P(O)CH2CO2Et/0 to 25 oC/18 h (77%), vii) CH3(CH2)9Li/THF/-78oC/3 h (81%), viii) NaH/THF/BnBr/Bu4NI/reflux/4 h (93%), ix) Aqueous 2N HCl/25 oC/6 h (75%), x) TMSCl/
EtOAc/-20 oC/20 min; MsCl/Et3N/-20oC/30 min; aqueous 2N HCl/25 oC/1 h (79%), xi) K2CO3/MeOH/25
oC
/3 h (84%), xii) Me3SI/n-BuLi/THF/-40oC/1 h then -40 to 25 oC/12 h (80%), xiii) 10/Grubbs' II catalyst/
CH2Cl2/25oC/22 h (61% based on 13), xiv) H2/10% Pd-C/EtOH/25 oC (88%), xv) Amberlyst 15®/EtOH/
25 oC/18 h (91%).
RO
OR
11
(CH2)9CH3
OH
viii-xi
IIxiv,xv
CO2Et
R,R = Cyclohexylidene
v
desilylation and base treatment. Its reaction with the sulphorane, generated from Me3SI
afforded the allylic alcohol 13 (equivalent to C2
synthon). The cross-metathesis reaction
between 10 and 13 gave the ester 14. Its catalytic hydrogenation followed by an acid-
catalyzed trans-esterification with ethanol furnished II (Scheme 2).
CHAPTER III: CHEMOENZYMATIC SYNTHESES OF TWO MACROLIDES
Chemoenzymatic approaches, involving the biocatalytic reactions as some of the key
steps are viable options in the syntheses of natural products and their congeners.8 In this
chapter, the chemoenzymatic syntheses of (i) the polyketide secondary metabolite, (-)-
A26771B (III), isolated from the fungus Penicillium turbatum with reported moderate
activity against the gram-positive bacteria, mycoplasma, and fungi;9 and (ii) the 16-
membered homodimeric macrodiolide, pyrenophorol (IV), produced by Pyrenophora
avenae10
are described. A number of enantioselective syntheses of III, including several
formal syntheses targeting IIIa, an advanced precursor of III have been reported.11
In the
present investigation, a formal (up to IIIa) and two total syntheses of III were developed
using the lipase-catalyzed acylation of secondary carbinol moieties to install the required
stereogenic centres as well as to construct the macrolide core. In addition, a shorter synthesis
of III was developed using a combination of biocatalytic kinetic resolution and a chemical
asymmetric allylation as the key steps. The target IV was also synthesized by two routes from
O
O
O
O
HO2C
O O
O
O
O
III IIIa
Figure 3. Chemical structures of the target molecules.
O O
OH
O
O
OH
(-)-Pyrenophorol (IV)Precursor of III
vi
the stereomers of a versatile synthon via a diversity-oriented synthetic (DOS) strategy. The
chemical structures of the synthesized compounds are shown in Figure 3 followed by a brief
account of the syntheses.
(i) Synthesis of the Antibiotic (-) A26771B (III). For the synthesis, an effective protocol for
accessing the chiral methylcarbinol [MeCH(OH)] unit of III was developed by reacting the
Grignard reagent of 11-bromo-1-undecene (15) with acetaldehyde followed by a Novozym
435®)-catalyzed trans-acetylation of the resultant (±)-alcohol 16 to obtain the acetate (R)-17
and (S)-16 in good ees at optimized conversions. Alkaline hydrolysis of (R)-17, base-
catalyzed silylation with tert-butyldiphenylsilyl chloride (TBDPSCl) followed by Upjohn
dihydroxylation and NaIO4 treatment furnished the aldehyde 18, which on reaction with
vinylmagnesium bromide followed by another Novozym 435®
-catalyzed acetylation
furnished (3S)-19 (95% ee) and the acetate 20 (98% ee). Tetrahydropyranylation of (3S)-19
with 3,4-dihydropyran (DHP)/pyridinium p-toluenesulphonate (PPTS), dihydroxylation of
vii
the alkene, its NaIO4 cleavage, and reaction of the resultant aldehyde with vinylmagnesium
bromide furnished 21. This on acid-catalyzed
depyranylation and reaction with 2,2-dimethoxypropane (2,2-DMP) furnished the
corresponding 3,4-acetonide, which was desilylated and subjected to a Novozym 435®
-
catalyzed acrylation to obtain 22. Its ring-closing metathesis furnished the desired macrolide
IIIa (Scheme 3).
For the synthesis of III, the alcohol 21 was desilylated with Bu4NF to obtain the diol 23. Its
Novozym 435-catalyzed reaction with ethyl acrylate furnished 24, which on an RCM reaction
furnished the macrolide 25. This on PCC oxidation followed by acidic depyranylation and a
base-catalyzed succinoylation produced the target compound III (Scheme 4).
Alternate synthesis of III. To reduce the number of synthetic steps and avoid several
unnecessary protection/ deprotection steps, an alternate synthesis of III was developed
(Scheme 5). For this, the alcohol (S)-16 (Scheme 3) was converted to the aldehyde (S)-18 by
silylation and oxidative olefin cleavage as mentioned for the synthesis of IIIa. Its asymmetric
allylation
with allylSnBu3/InCl3/(R)-BINOL12
furnished an allylic alcohol as a single
stereomer, which was converted to the THP ether 27. After desilylation with Bu4NF, the
viii
resultant alcohol was esterified with acrylic acid under the Mitsunobu conditions to obtain
the acrylate 28. Its RCM reaction furnished the desired macrolide 29, which was
converted the γ-oxo compound 30 via a SeO2-catalyzed allylic oxidation.13
This was
subsequently converted to III as above.
(ii) Diversity-oriented Synthesis (DOS) of Pyrenophorol Enantiomers. Retrosynthesis
(Figure 4) of natural pyrenophorol (IV), a C2-symmetric molecule with four stereogenic
carbinol centres revealed the synthon D, amenable from E as its immediate precursor.
Availability of all the stereomers of E would provide easy access to various stereomers of IV
via a DOS strategy. Hence, we synthesized all the four stereomers of an E equivalent by a
biocatalytic route to use them to synthesize the enantiomers of IV.
ix
Synthesis of the DOS intermediate stereomers. The synthesis (Scheme 6) commenced
by resolution of (±)-sulcatol (31) via a Novozym 435®-catalyzed acetylation with vinyl
acetate to obtain the (S)-31 and (R)-acetate 32 (both >98% ees) at 50% conversion. The
acetate 32 on LiAlH4 reduction and reaction with TBDPSCl/imidazole gave (R)-33.
Reductive ozonolysis of (R)-33 followed by reaction with vinylmagnesium bromide furnished
(3RS,6R)-34. As above, its Novozym 435®-catalyzed-acetylation afforded (3R,6R)-34 and
(3S,6R)-35 both with >98% ees at 50% conversion. A similar sequence of reactions on (S)-
31 furnished (3R,6S)-34 and (3S,6S)-35 both with >98% ees at 50% conversion
Synthesis of natural pyrenophorol. For the synthesis, a cross-metathesis of ethyl acrylate and
(3S,6R)-34, obtained from the corresponding acetate and silylation with tert-
butyldimethylsilyl chloride (TBSCl)/ imidazole furnished 36. Its alkaline hydrolysis gave the
acid 37. Alkaline hydrolysis of the acetate (3S,6S)-35 followed by benzylation gave 38,
which was desilylated to obtain the alcohol 39. Esterification of 37 with the alcohol 39 under
Mitsunobu conditions and a global desilylation afforded the diol ester 40. Its Novozym 435®
x
catalyzed acrylation proceeded regioselectively to give 41. This on an RCM reaction and
debenzylation completed the synthesis of (5S, 8R,13S,16R)-IV (Scheme 7).
Synthesis of enantiomer of natural pyrenophorol. To demonstrate the versatility of the DOS
approach, the synthesis of (+)-IV was also accomplished (Scheme 8) using the DOS
intermediate (3R,6R)-34. Thus, its cross-metathesis with ethyl acrylate in the presence of
Hoveyda-Grubbs’ II catalyst and subsequent tetrahydropyranylation furnished 43. After
alkaline hydrolysis, the resultant acid was desilylated to obtain the hydroxy acid 44 with
proper stereochemistry for dimerization. Accordingly, compound 44 was subjected to
Mitsunobu esterification under high dilution to obtain the pyrenophorol derivative 45, which
on depyranylation produced (+)-IV.
xi
OTBDPS
OH
i,ii
75%
OTBDPS
OTHP
CO2Etiii,iv
vO O
OTHP
O
O
OTHP
i) CH2=CHCO2Et/Hoveyda-Grubbs' II catalyst/CH2Cl2/25oC/3 h, ii) DHP/PPTS/CH2Cl2/7 h, iii)
Aqueous NaOH/MeOH/25 oC/0.5 h, iv) Bu4NF/THF/80oC/2 h, v) Ph3P/DIAD/THF/0 to 25
oC/18 h, vi) PPTS/MeOH/25 oC/6 h.
Scheme 8.
OH
OTHP
CO2H
45
60%
50%
(+)-IV
43
vi
81%
O O
OH
O
O
OH
44(3R,6R)-34
xii
References
1 (a) Asymmetric Synthesis; Morrison, J. D., Ed.; Academic Press: NY, 1983; Vol. 2,
Chapter 2; (b) Gawley, R. E.; Aube, J. Principles of Asymmetric Synthesis, 2nd
Edition, 2012; Catalytic Asymmetric Synthesis, (Ed. Ojima, I.), John Wiley & Sons,
2013.
2 Turner, W. B.; Aldridge, D. C. in Fungal Metabolites II. Academic Press, London,
1983.
3 Garcia-Urdiales, E.; Alfonso, I.; Gotor, V. Chem. Rev. 2005, 105, 313–354.
4 Lovera, A.; Bonilla, C.; Hidalgo, J. Rev. Peru´ Med. Exp. Salud Publica 2006, 23,
177–181.
5 Takada, K.; Uehara, T.; Nakao, Y.; Matsunaga, S.; Van Soest, R. W. M.; Fusetani, N.
J. Am. Chem. Soc. 2004, 126, 187–193.
6 (a) Trnka, T. M.; Grubbs, R. H. Acc. Chem. Res. 2001, 34, 18–29; (b) Nicolaou, K.
C.; Bulger, P. G.; Sarlah, D. Angew. Chem., Int. Ed. 2005, 44, 4490–4527.
7 Goswami, D.; Chattopadhyay, A.; Chattopadhyay, S. Tetrahedron: Asymmetry 2009,
20, 1957–1961.
8 (a) Hudlicky, T.; Reed, J. W. Chem. Soc. Rev. 2009, 38, 3117–3132; (b) Clouthierzab,
C. M.; Pelletier, J. N. Chem. Soc. Rev. 2012, 41, 1585–1605.
9 Michel, K. H.; Demarco, P. V.; Nagarajan, R. J. Antibiot. 1977, 30, 571–575.
10 Nozoe, S.; Hirai, K.; Tsuda, K.; Ishibashi, K.; Shirasak, M. Tetrahedron Lett. 1965,
4675–4677.
11 (a) Kobayashi, Y.; Okui, H. J. Org. Chem. 2000, 65, 612–615; (b) Gebauer, J.;
Blechert, S. J. Org. Chem. 2006, 71, 2021–2025 and references cited therein.
12 Teo, Y. -C.; Tan, K. -T.; Loh, T. -P. Chem. Commun., 2005, 1318–1320.
13 Bestmann, H. J.; Schobert, R. Angew Chem. Int. Ed. Engl. 1985, 24, 791-792.
LIST OF FIGURESLIST OF FIGURESLIST OF FIGURESLIST OF FIGURES
xiii
Figure No. Figure Name Page No.
I.2.1. Role of chirality in biological activities 5
I.2.2. Examples of some natural chiral pool materials 6
I.2.3. Asymmetric reactions (a) enantiotopic
substitution, (b) face-selective addition 8
I.2.4a. Cram’s open chain model 10
I.2.4b. Cram’s cyclic chelate model 11
I.2.4c. Cram’s dipolar model 11
I.2.5. Felkin-Anh model 12
I.2.6a-c. Energetics of asymmetric transformations 13
II.1.1. Chemical structures of the oxylipins 1a-d
and retrosynthesis of 1d. 27
II.1.2. 1H NMR spectrum of 18. 30
II.1.3. 13
C NMR spectrum of 18. 30
II.1.4. 1H NMR spectrum of 23. 32
II.1.5. 13
C NMR spectrum of 23. 32
II.1.6. 1H NMR spectrum of 24. 33
II.1.7. 13
C NMR spectrum of 24. 33
II.2.1. Chemical structures of schulzeines A-C. 36
II.2.2. Retrosynthesis of the polyol segments
of the schulzeines B and C. 39
II.2.3. 1H NMR spectrum of 45. 42
II.2.4. 13
C NMR spectrum of 45. 42
II.2.5. 1H NMR spectrum of 52. 44
II.2.6. 13
C NMR spectrum of 52. 44
III.1.1. The chemical structures of the macrolide
and its precursor 65
III.1.2. 1H NMR spectrum of (3S,13R)-72. 72
III.1.3. 13
C NMR spectrum of (3S,13R)-72. 72
III.1.4. 1
H NMR spectrum of Va. 74
III.1.5. 13
C NMR spectrum of Va. 74
III.1.6. 1
H NMR spectrum of V. 78
III.1.7. 13
C NMR spectrum of V. 78
III.1.8. 1H NMR spectrum of 85. 81
III.1.9. 13
C NMR spectrum of 85. 81
III.2.1. Some representative natural products bearing
the hept-6-ene-2,5-diol structural motif 85
III.2.2. 1H NMR spectrum of (3R,6R)-127. 93
III.2.3. 13
C NMR spectrum of (3R,6R)-127. 93
xiv
III.2.4. 1
H NMR spectrum of (3S,6R)-127. 94
III.2.5. 13
C NMR spectrum of (3S,6R)-127. 94
III.2.6. 1
H NMR spectrum of (3S,6S)-128. 95
III.2.7. 13
C NMR spectrum of (3S,6S)-128. 95
III.2.8. 1H NMR spectrum of (-)-VI. 100
III.2.9. 13
C NMR spectrum of (-)-VI. 100
III.2.10. 1H NMR spectrum of (4R,7R)-133. 103
III.2.11. 13
C NMR spectrum of (4R,7R)-133. 103
CHAPTER ICHAPTER ICHAPTER ICHAPTER I
“Introduction to asymmetric “Introduction to asymmetric “Introduction to asymmetric “Introduction to asymmetric
synthesis and polyols”synthesis and polyols”synthesis and polyols”synthesis and polyols”
1
I.1: PREAMBLE
Recent advances in biological and material sciences have led to identification of
various target and purpose-specific fine chemicals. Further, extensive research on natural
products chemistry especially with an eye to drug development has led to the isolation of
myriads of bioactive compounds as well as identification of suitable pharmacophores. These
compounds often bear complex structures and possess chirality. Even at the height of
maturity, synthetic organic chemistry is facing the challenge to design and develop efficient
syntheses for such functionally enriched complex biologically active compounds.
Development of facile, atom economic, high yielding and selective synthetic routes appears
the only solution to meet the requirements in a sustainable manner. Because most syntheses
proceed from simple starting materials to complex targets, ideally the synthesis should aim to
reach the target molecule using readily available, inexpensive starting materials via simple,
safe and environmentally acceptable protocols. Thus, the design and development of new
reactions and reaction sequences that allow for a great increase in target-relevant complexity
are clearly essential for progress towards the next level of sophistication in organic
synthesis.1 Given the importance of stereochemistry in bio-recognition, the issue of
asymmetric synthesis has become overwhelming in modern organic synthesis. The
recognition that stereoisomers of a compound are separate molecular entities with specific
properties has made a paradigm shift of the perspectives of organic synthesis.
In addition, introduction of the green chemistry philosophy to develop
environmentally-safe chemical processes, and the concept of multi-target rather than target-
specific syntheses have become the buzzword of modern organic synthesis. A given synthetic
protocol becomes reliable only when it can be employed to achieve a given organic
transformation efficiently and cleanly with no undesired conversions occurring under the
chosen conditions. Because most syntheses proceed from simple starting materials to
2
complex targets, there are two general ways of approaching this ideal synthesis (i. e.,
achieving maximum relevant complexity increase while minimizing step count): the use of
strategy-level reactions (e.g., the Diels−Alder reaction) that allow in one step for a great
increase in target-relevant complexity or the use of multistep processes (e. g., polydirectional
synthesis, tandem, serial, cascade, domino, and homo- and heterogenerative sequences) that
produce similar or greater complexity changes in one operation. This is especially important
to obtain “molecules with tailored properties” in the most efficient manner. On the other
hand, green chemistry encourages the design of products and processes with minimum or no
waste and generation of hazardous substances, and seeks to reduce the negative impact of
chemistry on the environment by preventing pollution and wastes. The emphasis is to
formulate processes to maximize the yield of the required products without creating wastes
rather than only reducing it. From this perspective, syntheses of pure stereomers also
contribute to green chemistry. Overall, selectivity has become the keyword of modern
organic synthesis as it provides solutions to the above problems, and vigorous effort is being
directed to this end.2 This is generally achieved using metal complexes and/ or biocatalysts
that ensures higher degree of selectivity, better efficacy, and thus, fulfills the criteria of ideal
organic synthesis.
Thus, the major focus of the present investigation has been on asymmetric synthesis,
and some of the key aspects of asymmetric synthesis is presented in the following section.
Subsequently the scope and limitation of biocatalysis in organic synthesis is discussed, since
this methodology has been extensively used in the present investigation. In tune with this
theme, the present investigation was targeted to design asymmetric syntheses of some
medicinally important aliphatic polyols, via chemoenzymatic routes or using some sugar-
derived renewable natural products. The choice of the target molecules was decided by their
potential use in medicinal chemistry, particularly as anti-fungal, anti-inflammatory and
3
chemo-preventive agents, which are of prime importance of our group. Hence, brief account
of asymmetric synthesis and a summary of the natural polyols are presented in the following.
This is followed by an overview of the aliphatic polyols and the objectives of the present
investigations.
I.2: KEY ASPECTS OF ASYMMETRIC SYNTHESIS
Although asymmetric synthesis is sometimes viewed as a sub-discipline of organic
chemistry, in actuality, this topical field transcends any parochial classification and pervades
essentially the whole of chemistry.3 The importance of enantiomerically pure compounds
comes from the central role of enantiomer recognition in biological activities. There are many
examples of drugs,4a
agrochemicals4b
and other chemical compounds where the desired
biological property is related to the absolute configuration of the compound in question.
Although biological implication of the chirality of a molecule is very well-understood, the
differential recognition by the stereomers is also being utilized in designing novel molecular
entities for various non-biological applications. Thus, chirality plays a crucial role in deciding
various properties of a molecule. A short account of the importance of chirality on biological
activities is provided in the following.
I.2.1 Importance of chirality on bioactivity. This aspect is well rationalized by the fact that
the biological perception and action of any molecule is primarily guided through its
interaction with various proteins such as enzymes, receptors and other biopolymers
(polysaccharides, and nucleic acids). All these provide chiral environments that can
discriminate the different stereomers of the organic molecules. The recognition events in
biology and the action of drugs that intervene in these events almost always involve the
molecular recognition of a biologically active molecule by a chiral non-racemic receptor
structure. The two enantiomers of a drug molecule cannot be expected to bind equally well to
the receptor and so should cause different biological responses. Thus, only one enantiomer of
4
the drugs is often endowed with the desired biological activity, while the other enantiomer is
inactive or possesses a different activity and may cause toxic side effects. For drug delivery,
the potency of an active enantiomer compared with a racemic mixture of active and inactive
enantiomers is that the dose can be reduced to half. Moreover, the problems that arise with
optically impure pharmaceuticals, even when employed at high enantiomeric excess (ee), are
no less significant. Enantiomers may also be competitive antagonists. This is the case for (+)-
and (-)-isopropylnoradrenaline acting on the α1-adrenergic receptors in rats.4c
A further
possibility is that the non-beneficial enantiomer may preferentially participate in
biotoxication. An example is deprenyl, an antidepressant and anti-Parkinson’s disease drug,
for which the less active (S) isomer is converted into (S)-(+)-amphetamine, which causes
undesired CNS stimulation.4d
Another drug, S-propanolol is a β-blocker, but the R-isomer is a
contraceptive. The most dramatic example in this aspect is the well known case of
thalidomide. Its (R)-enantiomer is sedative and was used for morning sickness of pregnant
women. However, the (S)-enantiomer was later found to be teratogenic causing wide spread
birth defects. This tragedy really emphasized the importance of synthesis of enantiomerically
pure compounds. In the series of eight isomers of the pyrethroid deltamethrin, the (R,R,S)
isomer is the most powerful insecticide, whereas the (R,S,S) stereoisomer is inactive.4e
For
the food additive, aspartame, the (S,S)-enantiomer is used as an artificial sweetener, whilst
the (S,R)-isomer tastes bitter and must be avoided in the manufacturing process. Even when
the other enantiomers are inert, it may be desirable to synthesize and use the active one in its
pure form. The S-enantiomer of ibuprofen is a pain reliever, whereas the R-form is inactive.
Some selective examples highlighting this aspect is shown in Figure I.2.1.
5
From the foregoing, the importance of chirality especially on drugs, agrochemicals,
perfumeries and food-additives are obvious. In view of this, development of enantiomeric
synthesis has assumed great significance. This is especially most important for the
pharmaceutical industries, since the enantiomers of chiral drugs are considered as two
different compounds. Enantiomeric synthesis of target compounds can be accomplished using
different strategies, which are briefly presented below.
I.2.2 Strategies of enantiomeric synthesis. There are several methods to obtain
enantiomerically pure materials, which include classical optical resolution via fractional
crystallization of diastereomers, chromatographic separation of enantiomers, chiral pool
synthesis, enzymatic and microbial routes, and asymmetric synthesis.
Resolution of racemates. This protocol5a-d
via preferential crystallization of diastereomeric
salts or covalently bonded diastereomers is the oldest and still one of the most important
methods in obtaining enantiomerically pure compounds in the industry. In resolution, by
differential crystallization, a racemic material is converted into a separable mixture of
6
diastereomers, using a stoichiometric amount of an optically pure resolving agent. Some of
the commonly used resolving agents are: (i) tartaric acid, for resolution of secondary alcohols
and amines; and (ii) alkaloids such as brucine salts or amines such as α-phenylethyl amine,
for resolution of acids. Ideally the resolving agent should be available in its enantiomeric
forms with high optical purity, and should produce crystalline diastereomeric derivatives.
Moreover, this method requires recovery of the starting materials and reagents, and provides
50% of the unwanted isomer, which must be racemized or discarded.
Chiral pool synthesis. This method does not involve formation of any new stereogenic
centres. Instead, the stereogenic centres of the target molecules are derived from that present
in the starting chiral materials. Nature provides a large repertoire of optically active
compounds, the so called chiral pool materials. Amongst these, the enantiomerically pure
compounds such as α-amino acids, steroids, carbohydrates, alkaloids and terpenes are
important starting materials in enantiomeric syntheses.6 Some well-known and often-used
'chiral pool' materials are shown in Figure I.2.2.
Well-designed transformations and synthesis starting from these chiral compounds have
resulted in a large number of enantiomerically pure compounds. However, this approach is
limited by the availability of inexpensive starting materials with the right sense of chirality.
Often the natural pool materials are available in one of their enantiomeric forms. For
7
example, naturally occurring sugars and amino acids possess only the D- and L-
configurations respectively. Thus, when the synthesis of a target compound requires the other
enantiomer of these starting materials, the synthesis becomes lengthy and inefficient and may
even be difficult to accomplish. At times, it may be difficult to find a suitable enantiopure
starting material, and other methods may prove more fruitful. Also, utmost care needs to be
taken to avoid any racemization during the reaction sequence. In terms of versatility and
utility, carbohydrates are the most preferred 'chiral pool' materials, since they contain several
stereogenic centres, and often provide suitable steric bias for the subsequent transformations.
However, the carbohydrate-based syntheses may require a number of protection and
deprotection steps due to the presence of several and similar functionality (secondary
hydroxyl groups). Further, many 'chiral pool' materials such as the alkaloids, steroids and
triterpenes are not universally useful in asymmetric synthesis because their structures may not
match with those of the target compounds.
Asymmetric reactions. An asymmetric reaction is defined as a reaction in which an achiral
unit in an ensemble of substrate molecules is converted to stereoisomeric products in unequal
amounts.7
Thus, an asymmetric synthesis is one, which creates new stereogenic centres in a
controlled way. The energy profile of such reactions suggests favourable formation of
racemates as the transition states R# and S
# are enantiomeric and therefore, are isoenergic. As
a consequence, the rate of formation of the R-isomer is equal to that of the S-isomer, and the
reaction affords a racemic mixture. Thus, for the development of an asymmetric synthesis,
the transition states must be diastereomeric so that their potential energies are different. This
would ensure that the enantiomeric products are formed at different rates because of the
involvement of different activation energies in their generation. As different molecular
entities, the transition state diastereomers would be produced in unequal amounts, making the
processes enantio- or diastereoselective (or both), and, hence may give rise to
8
enantiomerically pure products. In other words, the newly generated stereogenic centre
should not be the first one in the ensemble. This can be achieved only by using a chiral
reagent, substrate, solvent, catalyst or physical forces such as circularly polarized light. Under
these conditions, the reactions can be stereo-differentiating to “induce” chirality at the newly
formed stereogenic centers. Asymmetric synthesis involves i) selective displacement of an
enantiotopic group at the prochiral or chiral centres, and (ii) selective addition of a reagent to
an enantiotopic (Re/Si)-face of a π-bond (Figure I.2.3.).8
These are known as topo-, isomer- and face-differentiating reactions. The topo- and isomer-
differentiating reactions can induce asymmetry by substitution or by preferential
removal/elimination of a pro-R or a pro-S substituent, all these events being governed by
theromodynamic and/ or kinetic factors. Two types of stereo-differentiating reactions can be
broadly conceived: (i) when the chirality of the reagent, solvent, or catalyst influences the
enantio-differentiation to produce the enantiomers; and (ii) when the chirality of the substrate
controls the stereochemical outcome of the reaction to furnish diastereomers. In the first
category, the most widely encountered situation is the regent-controlled “asymmetric
induction” and some important achievements in this field include, but not limited are the
asymmetric catalytic hydrogenation of dehydroamino acids, as described by Knowles et al.9a
Sharpless epoxidation9b,c
and dihydroxylation,9d
and the second generation catalytic
hydrogenation process developed by Noyori et al.9e
9
Catalytic asymmetric synthesis has economic and environmental advantages over
stoichiometric asymmetric synthesis for industrial scale production of enantiomerically pure
compounds. This can have a high turnover of chirality, and under well-chosen conditions,
many chiral molecules can be produced by one catalyst molecule. The aspect of
multiplication of chirality is characteristic of both biocatalysts and chemical catalysts. Some
commercially important chemical asymmetric reactions that can be readily cited are the
synthesis of L-menthol by asymmetric isomerization,9f,g
asymmetric cyclopropanation9h
and
synthesis of L-dopa by asymmetric hydrogenation.9i
Although metal/metal salt-catalyzed reactions remain the mainstay in asymmetric
synthesis, the last few years have witnessed a spectacular advancement in new catalytic
methods based on metal-free small organic molecules (organocatalysis).10a,b
In many cases,
these give rise to extremely high enantioselectivities, and offer notable preparative
advantages such as (i) the catalysts are available, inexpensive and stable; (ii) usually the
reactions can be performed under an aerobic atmosphere with wet solvents; (iii) the
organocatalysts can be anchored to a solid support and reused more conveniently than
organometallic/bioorganic analogues; and (iv) was promising for high throughput screening
and process chemistry. The organocatalytic reactions are more closely related to enzyme- or
antibody-catalyzed reactions than to organometallic processes. Hence these are often also
known as artificial enzymes or enzyme mimetics.10c
One of the most adopted protocol for creating chiral molecules is the addition of
nucleophiles to the keto/aldehyde functionality. The resultant alcohols are of wide occurrence
in nature, and are also precursors to varied types of other target molecules such as
macrolides, spiroketals, amines, heterocylic compounds etc. Different organometallic
reagents are primarily chosen as the nucleophiles for such reactions, which can be carried out
under reagent-controlled or substrate-controlled conditions, or a combination of both. Several
10
models have been proposed to explain such a diastereoselectivity for the substrate-controlled
reactions. Two of the most preferred models are briefly discussed below.
Cram’s model11
: When a carbonyl group attached to an asymmetric centre (e. g.,
RCOCRLRMRS in which RL, RM and RS stand for large, medium, and small groups
respectively) undergoes nucleophilic addition with organometallic or metal hydride reagents,
two diastereomeric products, erythro and threo result, of which one predominates. The
relative configuration of the predominant isomer is often predicted by Cram’s empirical
models. In the open chain model, the C=O group of the ketone is flanked by the two smaller
groups (RS and RM) with the large group (RL) nearly eclipsed with R (Figure I.2.4a.). The
reaction takes place after coordination of the metallic part of the reagent with the C=O
followed by transfer of the alkyl (R') or H to the trigonal carbon from the side of RS (route a)
in preference to that closer to RM (route b) to give the product A. Although no mechanistic
rationalization has been claimed, it is reasoned that the complexed C=O group becomes
effectively the bulkiest group, and is thus, better placed between RS and RM. Although only
one enantiomer of the substrate is shown in the model, the rule is equally applicable to the
racemic substrate wherein racemic products are obtained.
If the substrate contains a chelating group such as OH, NH2 and OMe, α-to carbonyl moiety,
the stereochemistry of the product is predicted by Cram's rigid (chelate) cyclic model (Figure
I.2.4b.). In this model, the metallic part of the reagent is doubly coordinated to form a five-
11
membered ring as in B. When the chelating group is RM, the cyclic model predicts the same
stereochemistry as the open chain model; but if it is RS or RL, opposite stereochemistry
follows. Asymmetric induction through chelate model is usually high.
If a strongly electronegative group, e. g., a halogen atom is present α to the C=O group, a
dipolar model is suggested to predict the stereochemical outcome of the reaction. The dipoles
of the carbonyl bond and the C-X bond oppose each other and so they are placed anti as in
the model C to minimize the dipolar repulsion. The nucleophile adds from the side of RS
giving the major product as shown in Figure I.2.4c.
Despite predicting the stereochemical course of the reactions correctly, the Cram's models
often fail to give a quantitative assessment of the asymmetric induction in terms of steric
interactions. A few alternative models have been proposed to predict the stereochemical
outcome of the designated reactions in more quantitative terms. Of these the Felkin-Anh
model, discussed below has gained consensus.
12
Felkin-Anh model12
: In this model, two reactive conformations D and D' (Figure I.2.5.) have
been considered in which either the largest (RL) or the most electron withdrawing group
(which provides the greatest σ*-π* overlap with the carbonyl π* orbital) at Cα is placed at
right angle to the C=O double bond. Between the two, the first (conformation D) with RM
opposing C=O and RS gauche to R is usually preferred. The non-bonded interactions,
involving R and RS (rather than R and RM as in D') are thus minimized. The model predicts
the same stereochemistry as Cram’s, but provides a more quantitative assessment of the 1,2-
asymmetric induction. A third conformation (D'') may make some contribution but is
generally ignored (unfavorable steric interactions).
Energy considerations in asymmetric synthesis.
The selectivity achieved in the reactions will depend on the differences of the
activation energies, ∆∆G*, since they take place under kinetic control. This implies that the
most abundant product is that originating via the lowest activation energy. Thus, no
asymmetric induction is possible without any chiral auxiliary, as the transition states of
formation of the enantiomeric products have identical activation energies (Figure I.2.6a.)
When the products in the asymmetric synthesis are diastereomeric, the selectivity can be
dictated also by the difference in kinetic energies (kinetic control, Figure I.2.6b.), but when
the reaction is reversible, the selectivity (at equilibrium) will depend on the difference
between the free energies of the products, ∆G° (thermodynamic control).
13
Figure I.2.6a-c. Energetics of asymmetric transformations.
Figure I.2.6c describes a unique situation in which initially, under the conditions of kinetic
control, the product of R-configuration predominates. By contrast, thermodynamic control
leads to the predominant formation of the most stable product (S-CR*). The ratios of the
products depend directly on the magnitude of ∆∆G# (for kinetic control) or ∆G° (for
thermodynamic control). This would require a ∆G° or ∆G# ≥ 1.0 kcal/mol for achieving an
enantioselectivity of 70% and such an energy difference is usually provided by simple
electrostatic interactions.
Thus, the design of an asymmetric reaction must aim at maximization of ∆∆G#
or
∆G°, depending on whether product formation is kinetically or thermodynamically
controlled. In spite of all these attributes and even after handling hundreds of asymmetric
reactions, very little is known concerning the nature of the transition states of a particular
reaction. But, it has become clear that more rigid and organized transition states magnify the
effect of the strike interactions, hydrogen bonds, selective solvation etc. Considering that the
rigidity of the transition state is more pronounced at lower temperatures, asymmetric
induction is usually best achieved by carrying out the reactions at lower temperatures.
Eliel8b
has summarized several conditions for an efficient asymmetric process.
i) It has to be highly selective.
Fig. I.2.6b. Fig. I.2.6c. Fig. I.2.6a.
14
ii) The new centre of chirality must be cleanly separated from the rest of the molecule.
iii) The chiral auxiliary must be recovered without any racemization.
iv) The chiral auxiliary reagent must be easily and inexpensively available.
v) The reaction must proceed in good chemical yield.
vi) The balance between chiral auxiliary/reagent and product with the new chiral centre of
chirality is also important. Thus, best chiral auxiliary is an efficient chiral catalyst.
I.2.3 Strategies for determination of enantiomeric purities. Growing interest and
improvement in enantioselective syntheses led to an increased demand for accurate, reliable
and convenient methods of measuring the enantiomeric composition. Enantiomeric excess
(ee), defined as the absolute difference between the mole fraction of each enantiomer is a
measurement of purity used for chiral substances. It reflects the degree to which a sample
contains one enantiomer in greater amounts than the other. A large number of methods for the
determination of ees regardless of the chiral analytes have been developed over the years. As
in the asymmetric syntheses, determination of % ees is also based on the fact that while two
enantiomers have identical physical properties in an achiral environment, the
diastereoisomers have different physical properties to allow their separation using various
instrumental techniques such as HPLC, GC and NMR spectroscopy. To this end, formation of
the required diastereoisomers can be achieved transiently via a reversible diastereotopic non-
covalent interaction between the analyte and a chiral reagent, or by their covalent attachment
using their functionalities.
The non-covalent technique relies on different interactions of a chiral molecule with
other chiral compounds depending on the enantiomer used. For example, in the HPLC or GC
analysis, an analyte solution is passed over a chiral stationary phase so that it has a rapid and
reversible diastereotopic interaction with the stationary phase, allowing separation. Despite
being quick and accurate (±0.05%), these protocols need expensive chiral columns as well as
15
both the enantiomers of the analyte, and the chiral stationary phase may only work for limited
types of compounds. Nevertheless a wide variety of chiral columns is available and routinely
used. Compared to the conventional HPLC, use of the supercritical fluid chromatography in
chiral separations offers advantages such as short analysis and equilibration times due to low
mobile phase viscosity and superior diffusion characteristics.13
The % ees can also be determined using chiral paramagnetic lanthanide complexes
that can bind reversibly to certain chiral molecules via the metal centre to form two
diastereomeric complexes, and may often have different NMR signals. The coordination
process is usually faster than the NMR timescale and normally leads to a downfield shift of
the resonance. The differences in the resonance signals from each enantiomer are observed,
and the relative areas may be utilized to derive % ee, provided sufficient resolution of signals
is obtained. However, as the complexes are paramagnetic, line broadening is a major problem
in these analyses. Also, the compound is required to possess a Lewis basic lone pair (OH,
NH2, C=O, CO2H etc) and accuracy of the method is only ±2%.
In the alternative approach, the analyte is covalently attached to a second,
enantiomerically pure molecule to obtain a mixture of diastereoisomers that can be separated
by normal, achiral chromatography, or analyzed from their NMR spectra due to the large
separation in the signals of their diastereotopic moieties.14a
The most popular derivatizing
agent for alcohols and amines is α-methoxy-α-trifluoromethylphenylacetic acid (MTPA) or
Mosher’s acid as the MTPA esters and amides can be analyzed conveniently.14b
The
difference (≥ 0.15 ppm) in the OMe singlets or that (~0.17 ppm) of the 19
F atoms between the
diastereoisomers in the 1H or
19F NMR spectroscopy can be used to determine the % ees. In
addition, the diastereoisomers are often separable by chromatography. The Mosher’s
derivatives can also be used to determine the absolute configuration of a stereocentre
16
empirically using the δ differences (∆δ).14c
Besides, various other derivatizing agents, notably
various optically active mandelic acid derivatives are also used for this purpose.14d
I.3: BIOCATALYTIC ORGANIC REACTIONS
Myriads of chemical reactions are essential in the cellular systems sustaining life.
Nature, the super chemist executes them in an energy-efficient manner and under moderate
conditions (temperature, pH, aqueous and hydrophobic environments) using enzymes or the
biocatalysts, abundant in the microbial, plant and animal kingdoms. This has triggered hectic
activities among the synthetic organic chemists to use biocatalysts for designing atom-
economic and selective green organic reactions to obtain the desired products faster in higher
yields and with minimum wastes. The knowledge of biocatalysis to humans predates the
recorded history for brewing. The use of enzymes and whole cell microorganisms has been
important particularly in the food and beverage industries for the production of cheese, wine,
beer etc. Over the past 30 years, there is a substantial increase in the application of
biocatalysis to produce fine chemicals, especially in the pharmaceutical industry.15
In 1833,
Payen and Persoz investigated the hydrolysis of starch by diastase which was later
acknowledged by Berzelius as a biocatalytic reaction in 1835. In 1874, the first company
(Christian Hansen’s Laboratory) was set up for the marketing of enzyme preparations for
cheese making in Copenhagen. In 1894, Emil Fischer described the elegant aspects of
enzyme catalysis and also coined the term enzyme specificity. Enzymes as catalysts in
synthetic organic chemistry gained importance in the latter half of the 20th century, but
suffered from two major limitations viz. (i) non-availability of many enzymes in large enough
quantities and at affordable cost; and (ii) narrow substrate specificity, often poor stereo-
and/or regioselectivity and/or insufficient stability under the operating conditions. However,
with the advent of recombinant DNA technology and development of directed evolution,
17
these problems are adequately addressed. Currently, biocatalysis has become a part of the
toolkit of synthetic organic chemists and biotechnologists.16
Similar to other catalysts,17a
biocatalysts increase the speed of a reaction by stabilizing
its transition state, without affecting the thermodynamics. However, they offer some unique
characteristics such as higher rate enhancement and catalytic turnover number and most
importantly excellent selectivity over conventional chemical catalysts. For example, the rate
enhancement by biocatalysts can range by a factor of 106-10
12 vis-à-vis 10-10
3 by chemical
catalysts. Likewise only 0.005-0.05 mol% of biocatalysts are required to achieve the
conversion, as opposed to 5-50 mol% of chemical catalysts. Moreover, biocatalyst offer
chiral (stereo), positional (regio-), and functional group specific (chemo-) selectivities, all
desirable attributes in chemical synthesis as these may minimize the number of
protection/deprotection steps as well as side reactions, and assist easier isolation of the
desired products with less environmental problems.
Enzymes are more than just highly evolved catalysts17b
and many of the unique
characteristics of these sophisticated systems can be explained in terms of their built-in
feedback mechanisms and subtle intra- and intermolecular cooperation. They are proteins and
possess three-dimensional architectures containing primarily hydrophobic and a few polar
sites. These allow enzymes to effectively surround and enclose their substrates ("induced fit")
to catalyze the reactions. Hence, the biocatalytic reactions follow saturation or Michaelis-
Menten kinetics involving the reversible formation of an enzyme-substrate (ES) complex.
Formation of the ES complex is maximum when the substrate size and the disposition of their
groups match well with the enzyme conformation. This factor, classically referred to as “lock
and key mechanism” is responsible for the substrate specificity of the enzyme and
enantioselectivity of the biocatalytic reactions. Besides, the binding also helps in bringing the
reacting substrates closer (“proximity effect”) and weakens some of the existing covalent
18
bonds in the substrates. These, in turn, reduce the activation energy by stabilizing the
transition state of the reactions. Finally, the exclusion of the trapped water molecules brought
about by the substrate binding maximizes the increase in entropy and decreases the dielectric
constant, thus intensifying the electrostatic effects. It is worth noting that the spherical
enzyme architectures behave like soft balls wherein the bound water molecules work as
lubricants, stabilize the enzyme conformation and help in “squeezing in” the guest substrates.
This helps in accommodating even structurally different substrates than the natural ones,
helping their use in organic reactions.
Given that the enzyme secondary and tertiary structures are stabilized by various
weak non-covalent forces viz. hydrogen bonding, hydrophobic interaction and dipolar/ionic
interactions, it is also possible to modulate the enzyme conformation marginally by suitable
alteration of the environment. This has given rise to the concept of solvent engineering
wherein the stereochemical courses of many enzymatic reactions are tailored by merely using
water-immiscible organic solvents.18
This technique widens the scope of biocatalytic
reactions from a variety of considerations. Most of the organic compounds are insoluble in
water, and some even degrade, leading to no reaction or side reactions. Although the
enzymatic reactions are reversible, the thermodynamic equilibria of the reverse processes are
unfavorable in water. For example, in natural aqueous medium the lipases and proteases
catalyze hydrolysis of lipids and proteins. But the same enzymes can be used to catalyze
syntheses of these biomolecules by esterification and aminolysis in an organic medium. The
product recovery in non-aqueous enzymatic reactions are also easier. Moreover, while the
bound water molecules are essential to maintain the activity of the enzymes, their
denaturation is also induced in aqueous environment. In contrast, the enzymes have very rigid
conformations in dry solvents, and the crystalline insoluble enzymes can be recovered
without much loss of activity and reused. Hydrophobic solvents are usually superior to
19
hydrophilic ones as the reaction media because the latter have a greater tendency to strip the
tightly bound, essential water from the enzyme and deactivate it. Finally, the organic media
can significantly reduce the problem of enzyme inhibition by dissolving the substrates and
products.
It is now well-accepted that there is an enzyme-catalyzed reaction equivalent to
almost every type of known organic reactions. Based on the type of reactions carried out by
them, enzymes are classified into five broad categories viz. (i) oxidoreductases: They catalyze
oxidation and reduction within the cell; (ii) hydrolases: They catalyze hydrolysis and
formation of ester and amide bonds; (iii) transferases: They catalyze the transfer of
functional groups such as methyl, hydroxymethyl, formyl, glycosyl, acyl, alkyl, phosphate,
and sulfate groups; (iv) lyases: These are responsible for catalyzing addition and elimination
reactions; and (v) ligases: They are responsible for the most important cellular processes of
creating chemical bonds with nucleotide triphosphates, but have very few industrial
applications.
Both isolated enzymes and whole cells can be used as biocatalysts.19
Compared to the
whole cells, isolated enzymes offer several benefits, including simpler reaction apparatus,
higher productivity owing to higher catalyst concentration, and simpler product purification.
Compared to isolated enzymes, a whole-cell system has an advantage of recycling the
cofactors (nonprotein components involved in enzyme catalysis) and is more useful for the
cofactor-requiring enzymes such as oxidoreductases, lyases etc. In addition, it can carry out
selective synthesis using cheap and abundant raw materials. However, the whole-cell systems
require expensive equipment and tedious work-up because of large volumes, and have low
productivity. More importantly, uncontrolled metabolic processes may result in undesirable
side reactions during cell growth. The accumulation of these undesirable as well as desirable
products may be toxic to the cells, and their separation from the rest of the cell culture can be
20
difficult. Another drawback to whole-cell systems is that the cell membrane may act as a
mass transport barrier between the substrates and the enzymes. The whole-cell biocatalysis
approach is typically used when a specific biotransformation requires multiple enzymes or
when it is difficult to isolate the enzyme. In terms of industrial applications, despite needing
expensive cofactors, the oxidoreductases are widely used, and many processes have been
developed using the whole cell systems. Of particular interest among hydrolases are
amidases, proteases, esterases, and lipases. Amongst these, the lipases hydrolyze triglycerides
into fatty acids and glycerol; proteases viz. α-chymotrypsin, papain, and subtilisin
hydrolyze/form peptide bonds. The oligosaccharides and polysaccharides, vital for cellular
recognition and communication processes are industrially synthesized using transferases.
Isomerases are rarely used in industrial applications, the notable exception being the use of
glucose isomerase for high-fructose corn syrup production.
Biocatalysis can be used for synthesizing enantiopure compounds by (i) kinetic
resolution (KR) of a racemic mixture or (ii) asymmetric transformations of a prochiral
molecule. The KR protocol relies on the higher reaction rate of a particular enantiomer in its
racemic mixture for the specific reaction. The maximum yield in such kinetic resolutions is
50%. In biocatalyzed asymmetric synthesis, a non-chiral unit becomes chiral in such a way
that the different possible stereoisomers are formed in different quantities. The
oxidoreductases, present in many microorganisms including common baker’s yeast are often
used for the asymmetric reduction of ketones. On the other hand, the same enzyme can
catalyze enantioselective Baeyer–Villiger oxidation of cyclic ketones. The lipases are widely
used in esterification/aminolysis of α- or β-substituted acids as well as esterification/trans-
esterification of secondary alcohols under the KR protocol, and provide good to excellent
enantioselectivity. In some studies, lipases have also been found to be promiscuous to carry
out reactions akin to those expected. Some examples in this category include: (i) use of
21
Candida antarctica lipase for Michael addition reactions 18,20a
(ii) use of the same C.
antarctica lipase for Cannizzaro-type reaction of substituted benzaldehydes,20b
and (iii)
Henry reaction of aromatic aldehydes and nitroalkanes by Lipase A from Aspergillus niger.20c
The characteristics of limited operating regions, substrate or product inhibition, and
reactions in aqueous solutions have often been considered as the most serious drawbacks of
biocatalysts. Many of these drawbacks, however, turn out to be misconceptions and
prejudices. For example, many commercially used enzymes show excellent stability with
half-lives of months or even years under process conditions. In addition, many enzymes
accept non-natural substrates and convert them into desired products. More importantly,
almost all of the biocatalyst characteristics can be tailored with protein engineering and
metabolic engineering to meet the desired process conditions. Biocatalysts can constitute a
significant portion of the operating budget; however, their cost can be reduced by reusing
them when immobilized.
I.4: AN OVERVIEW OF ALIPHATIC POLYOL DERIVATIVES
Natural oxygenated fatty acids include those possessing hydroxy, keto or epoxy
functionalities, the hydroxy acids being most common.21
The epoxy acids are available from
some seed oils after long storage. The most widely occurring natural acids in this class are
vernolic acid and its positional isomer, coronaric acid. Most of the natural hydroxy acids are
optically active and may contain one or more hydroxy group(s) and additional olefin
functions. The polyhydroxy acids constitute a distinctive group and are available in the chain
length of C14 to C24. Many biotic and abiotic sources contribute to the occurrence of these
compound in various environmental media.22
These indicate the requirement for specific
development conditions of various microorganisms and their interactions with their habitats,
and have attracted attention in soil and biogeochemical research. For instance, several
rhizosphere bacteria were identified to release the phosphate solubilizing gluconic and
22
ketogluconic acids into soil thus improving the P supply for plants.23a
Mono- and dihydroxy
(poly) carboxylic acids, e. g., lactic, malic, tartaric, and citric acids, are often components of
plant root exudates.23b
Many lipidic components of plants contain the polyol derivatives and
are essential for plant male reproductive development and also protection against pathogens.
Mycolic acids, with a 2-alkyl-3-hydroxy carboxylic acid skeleton are high molecular weight
(contain up to 80 C-atoms), complex compounds in this category.23c
Importantly, the
macrolides, derived from the polyhydroxy acids are also abundant in nature, especially as
marine metabolites.24
Regarding their biological activities, the C18-hydroxy acids with diverse oxygenation
patterns have been reported to be cytotoxic against P388 mouse leukemic,24d
and HeLa
cells.25a
A ketohydroxy acid, obtained25b
from corn also showed encouraging anti-cancer
activity, while a dihydroxytetradecatrienoate and its ester, isolated from the fungus
Mycosphaerella rubella showed selective antibacterial activity against Sarcina lutea, Bacillus
cereus and B. subtilis, but not against Escherichia coli and Saccharomyces cerevisiae.26a
Likewise, the antiviral property of some hydroxylated unsaturated fatty acids from the
Basidiomycete, Filoboletus, have been described.26b
Pinellic acid is the active principle of the
Kampo medicine, Sho-seiryu-to (SST), which is used as an oral adjuvant for nasally
administered influenza vaccine.26c
I.5: OBJECTIVES OF THE PRESENT WORK
The present work was mainly focused on the development of operationally simple and
practically viable asymmetric syntheses of some aliphatic polyols and macrolides. Impressive
progress notwithstanding, development of simple, efficient and scalable strategies remains a
challenging and important goal in asymmetric organic synthesis.27
This provided the primary
motivation of the present investigations. The diverse pharmacological profiles of many of the
chosen class of compounds and their structural complexity provided the additional fillip. In
23
particular, our group is actively engaged in formulating efficient syntheses of new
immunomodulatory, anti-inflammatory, and anti-neoplastic agents.28
To this end, the
mannitol-derived compound, (R)-cyclohexylideneglyceraldehyde has been found to be an
excellent chiral template for enantiomeric syntheses of a diverse array of natural products and
their congeners. The aldehyde is amenable to various diastereoselective transformations using
commonly available, inexpensive reagents.29a-c
In addition, the lipase-catalyzed esterification
of secondary alcohols under kinetic control has often been found to proceed with good to
excellent enantioselectivity.29d-j
Hence, with the objective of developing some operationally
simple asymmetric syntheses of the target compounds, the two above mentioned asymmetric
strategies were judiciously used.
CHAPTER IICHAPTER IICHAPTER IICHAPTER II
“Glyceraldehyde“Glyceraldehyde“Glyceraldehyde“Glyceraldehyde---- Based Based Based Based
Asymmetric SynthesesAsymmetric SynthesesAsymmetric SynthesesAsymmetric Syntheses
of Some Target Aliphatic Pof Some Target Aliphatic Pof Some Target Aliphatic Pof Some Target Aliphatic Poooollllyols”yols”yols”yols”
24
CHAPTER II.1 TOTAL SYNTHESIS OF OXYLIPIN
II.1.1. Introduction
Araceae is one of the dominant tropical families amongst the herbs and vines, and
many of the species are used as traditional remedies or food. The plant, Dracontium loretense
Engl. belonging to this family (subfamily Lasioideae) is widely distributed in the Peruvian
Amazon, where it is known as “jergo´n sacha”. Various preparations of jergo´n sacha such as
dried powder, tincture, alcoholic and aqueous-alcoholic extracts are popular amongst the
current Peruvian herbal medicines, and available in pharmacies and stores. The infusion of its
corms is considered immune-booster in Peruvian folk medicine. The combination of the
extracts of D. loretense and Uncaria tomentosa is also used by AIDS patients to reinforce the
immune system.30a-c
Very recently, four novel oxylipins Ia-d (Figure II.1.1.) were isolated
from the n-butanol extract of D. loretense corms and their structures were elucidated by
extensive NMR and mass spectrometry. The n-butanol extract and some of its fractions (10
µg/mL) as well as compound Id (10 µM) showed potential immunostimulatory effect as
revealed by the 3H-thymidine incorporation assay with human peripheral blood mononuclear
cells (PBMCs). However, these were toxic to the cells at a higher concentration. Amongst the
constituent oxylipins of D. loretense, only compound Id exhibited proliferation activity on
the OKT3-activated PBMCs, while its C-10 epimer Ic was inactive.31
This emphasized the
crucial role of the C-10 stereochemistry for the biological activity. Earlier, our group also
found differential immunomodulatory activities of the castanospermine epimers.32
Amongst
the three stereogenic carbinol centres at C-6, C-9 and C-10 of Id, the configuration at C-6
was unresolved when the present synthesis of (6S,9R,10S)-Id was developed.33a
However,
recently Saikia et al.33b
have proposed the (6R,9R,10S)-stereochemistry for natural Id on the
basis of the optical rotation and 1H NMR J-values of their synthetic sample.
25
II.1.2. Previous Syntheses
Besides our own synthesis, Saikia et al.33b
have also synthesized (6S,9R,10S)-Id. In
addition, a synthesis of (6R,9R,10R)-Id has been reported, wherein the 9R,10R-
stereochemisty was installed by Sharpless asymmetric dihydroxylation, while that at C-6 was
obtained by a CBS reduction.33c
For the synthesis of (6S,9R,10S)-Id (Scheme II.1.1.), the diol
1 was converted to the alkenol 2 by monosilylation, PCC oxidation, and Wittig olefination.
i-iii
1
Scheme II.1.1.
2
6
HOOH
7
(6S,9R,10S)-Id
OTBS iv-vi
3
OTBS
O
OTBS
OH
SN
N
N N
Ph4
vii ivOTBS
OH
SN
N
N N
Ph5
O
O
O
O
CO2H
OH
viii-xO
O
CHO
OBnOH
OBn
OH
OTBSHO
5,xi-xii
8
vi,xiii-xiv
OTBS
OBn
CH3(CH2)7
OTBS
OTBS
9
xv-xix
(i) TBSCl/imidazole/CH2Cl2, (ii) PCC/CH2Cl2/mol.sieves, (iii) CH3PPh3I/n-BuLi/THF/-78oC to room temperature,
(iv) m-CPBA/CH2Cl2/0oC, (v) (R,R)-(salen)Co(III)OAc/H2O/0
oC, vi) Bu2SnO/p-TsCl/Et3N/CH2Cl2; K2CO3/MeOH,
(vii) PT-SH/CH2Cl2/Mont K-10, (viii) NaHCO3/ (CH3O)2SO2/H2O/40oC, (ix) BnBr/Ag2O/DMF/0
oC, (x) DIBAL-
H/Et2O/-90oC, (xi) KHMDS/THF/-78 oC, (xii) TBHP/ter t-BuOH-H2O (1:1)/reflux, (xiii) Heptylmagnesium
bromide/THF/CuI/-20 oC, (xiv) TBSCl/imidazole/CH2Cl2, (xv) p-TSA/MeOH/0oC, (xvi) Dess-Martin
periodinane/NaHCO3/ CH2Cl2, (xvii) NaClO2/NaHPO4/Me2C=CHMe/ter t-BuOH-H2O, (xviii) DDQ/CH2Cl2-H2O
(10:1), (xix) HCl (cat)/ MeOH/0 oC.
i
Its epoxidation with m-CPBA and Jacobsen’s hydrolytic kinetic resolution gave 3 (obtained
from the resolved diol). This on regioselective ring opening with 1-phenyl-1H-tetrazole-5-
thiol (PT-SH)/monmorillonite K-10 clay furnished 4, which was oxidized to the sulfone 5 by
m-CPBA oxidation. In a parallel sequence of reactions, the vitamin C-derived threonic acid
derivative 6 was esterified, benzylated and subjected to DIBAL-H reduction to obtain the
aldehyde 7. A Julia-Kocienski olefination between 5 and 7, followed by acetonide
deprotection under neutral conditions afforded the diol 8. Its mono-tosylation at the primary
26
carbinol group and base-treatment furnished the corresponding terminal epoxide, which on
reaction with a suitable Grignard reagent followed by silylation gave 9. Selective
deprotection of its -CH2OTBS group, Dess-Martin periodinane oxidation, Pinnick oxidation
and desilylation completed the synthesis.33b
27
II.1.3. Present Work
The primary motivation of the present work stems from our own interest in natural
immunomodulatory, anti-ulcer, anti-inflammatory, and anti-neoplastic agents.28
Especially
the reported immunomodulatory activity of Id was very attractive because many such agents
can boost human health. In view of these, and lack of any synthesis of Id prompted us to
develop first asymmetric synthesis4a
of the (6S,9R,10S)-stereomer of the compound Id.
In the present work, a convergent strategy towards the synthesis of the C18 fatty acid
Id was conceived using the chiral building blocks, 'A' and 'B'. It was envisaged that the
building blocks, 'A' and 'B' can be constructed by carrying out metal-mediated
diastereoselective addition of alkyl/allyl halides to the aldehyde 10. This would provide the
required stereogenic diol/carbinol moieties of the 'A' and 'B' units, while the
cyclohexylidenedioxy group can be functionalized to provide the terminal alkene
functionality. A cross metathesis reaction between the 'A' and 'B' units can furnish the entire
C18-carboxylic acid framework with the required chiral carbinol moieties at the appropriate
location and the desired 7E-olefin function of the target oxylipin (Figure II.1.1.).
OH
CO2HHO
CH3(CH2)7
OHOH
CO2HHO
CH3(CH2)7
OH
Ib
Ic Id
Figure II.1.1. Chemical structures of the oxylipins Ia-d and retrosynthesis of Id.
OH
CO2HHO
CH3(CH2)7
OH
(6S)-Id
OPg
CO2R
HO
CH3(CH2)7
OPg
A
B
+CM
CHO
O
10
O
CO2H
OH OH
OH
Ia
(CH2)7CH3
OH OH
OH
HO2C(CH2)4
28
The synthesis (Scheme II.1.2.) commenced by a diastereoselective allylation of the
aldehyde 10. Earlier using the Luche protocol, the Zn-dust-mediated reaction of allyl bromide
with 10 in THF-aqueous NH4Cl furnished the homoallylic alcohol 11 along with its 3R-
epimer in 90:10 diasteromeric ratio (dr).34a
However, we were unable to reproduce the results
and obtained 11 with a dr = 69:31. In view of this, we followed a recently reported Ga-
mediated allylation protocol in the room temperature ionic liquid, [bmim][Br].34b
The
reaction proceeded with excellent diastereoselectivity (syn/anti = 5:95) to produce 11 in
appreciable yield. The pure anti-isomer 11 was easily separated from the trace quantity of the
3R-epimer (formed in the reaction) by column chromatography and the relative
stereochemistries of its stereogenic centres were confirmed from the 1H NMR multiplets at δ
3.71-3.79 and 3.88-4.01 for the carbinol protons (1:3 ratio). The 1H NMR multiplets of the
designated protons appear at δ 3.52-3.58, 3.68-3.76 and 3.93-4.02 in 1:1:2 ratio for the syn-
isomer.
The alcohol 11 was subjected to silylation with tert-butyldiphenylsilyl chloride
(TBDPSCl) in the presence of imidazole and N,N-dimethylaminopyridine (DMAP) to furnish
12. Its formation was revealed from the absence of the IR OH stretching band, and
appearance of the 1H NMR singlet at δ 1.07 (9H) along with the aromatic multiplets at δ
7.36-7.44 (6H) and δ 7.67-7.76 (4H) for the TBDPS moiety. The alkene function of 12 was
regioselectively hydroborated with BH3-Me2S (BMS) and the intermediate trialkyl borane
oxidized with H2O2/NaOH to afford the alcohol 13. Appearance of the hydroxyl IR band
(3433 cm-1
) and the 1H NMR triplets (δ 3.39, 2H) for the –CH2OH group in place of the
olefinic resonances confirmed its formation. This on oxidation with pyridinium
chlorochromate (PCC) afforded the aldehyde 14. This was characterized from the IR bands at
2714 (-CHO) and 1729 (-CO) cm-1
, and the one-proton 1H NMR triplets at δ 9.14 for the
CHO protons. Its base-catalyzed Horner-Emmons reaction with triethyl phosphonoacetate
29
produced the conjugated ester 15. The strong IR peak at 1716 cm-1
(ester), and the 1H NMR
resonances at δ 4.14 (q, -CO2CH2), the olefinic resonances at δ 5.66 (d) and δ 6.71-6.79 (m)
as well as the 13
C NMR peak at δ 166.5 revealed its identity. The 1H NMR coupling constant
(16.0 Hz) for its olefinic doublets revealed it to be predominantly the E-isomer, although this
was of no consequence for the synthesis. Catalytic hydrogenation of 15 gave the ester 16
(lack of olefinic NMR resonances), which on treatment with aqueous trifluoroacetic acid
(TFA) furnished the diol ester 17. A strong IR band at 3455 cm-1
and a broad 1H NMR signal
at δ 2.43 for the OH group in place of the 1H NMR resonances for the cyclohexyl protons
confirmed its identity. Reaction of the diol 17 with excess p-toluenesulphonyl chloride (p-
TsCl) in the presence of pyridine furnished the corresponding ditosylate [IR bands at 1370
and 1177 cm-1
; 1H NMR six-proton singlet at δ 2.45 (CH3-Ph)], which on heating with NaI
and Zn-dust in DMF afforded the alkene ester 18 cleanly. The olefinic resonances at δ 4.92-
5.01 (m, 2H) and δ 5.70-5.80 (m, 1H) in its 1H NMR spectrum were consistent with its
structure (1H and
13C NMR spectra shown in Figures II.1.2. and II.1.3.). Compound 18 is the
required A-unit equivalent of Figure II.1.1.
30
Figure II.1.2. The 1H NMR of 18.
Figure II.1.3. The 13
C NMR of 18.
31
For the synthesis of the other chiral building block 23 (B equivalent), we resorted to
addition of alkyl lithium to the aldehyde 10, as reported by our group.35
Thus, the aldehyde
10 was reacted with CH3(CH2)7Li to furnish the anti-triol derivative 19 almost exclusively (dr
= 95:5). When the reaction was carried out with the Grignard reagent CH3(CH2)7MgBr,
compound 19 was obtained as a 29:71 mixture of the syn/anti isomers. The anti-compound
1936
could be easily isolated as a pure enantiomer by column chromatography. The anti-
stereochemistry of 19 was confirmed from the 1H NMR resonances of the carbinol protons
that appeared at δ 3.70-3.78 (1H) and δ 3.86-3.97 (m, 3H). For the corresponding syn-isomer,
these appeared as 1:1:2 multiplets at δ 3.46-3.48, δ 3.68-3.72 and δ 3.94-4.02. Silylation of
the alcohol 19 with TBDPSCl/DMAP in CH2Cl2 produced compound 20 (absence of IR
hydroxyl bands and appearance of the NMR resonances for the TBDPS group), which on
treatment with aqueous TFA furnished the diol 21 (IR peak at 3398 cm-1
and absence of
upfield cyclohexyl 1H
NMR resonances and acetal
13C peak at ~ δ 108). A regioselective
tosylation of the primary carbinol function of 21 was accomplished uneventfully by reaction
with p-TsCl/pyridine. Its IR spectrum showed bands at 3528 cm-1
(OH) as well as at 1362
and 1177 cm-1
(OTs), while the 1H NMR three-proton singlet at δ 2.45 accounted for the
CH3-Ph group. The resultant monotosylate was converted to the epoxide 22 by treatment with
K2CO3 in MeOH. This was characterized from the 1H NMR resonances at δ 2.11-2.16 (m,
1H), δ 2.43-2.48 (m, 1H) and δ 2.86-2.91 (m, 1H) along with the 13
C NMR peaks at ~ δ 45.9
and δ 54.1 for the epoxide functionality. Next, the sulphorane, generated by a base (n-BuLi)-
catalyzed deprotonation of Me3SI was reacted with the epoxide 22. The reaction proceeded
regioselectively at the C-1 position to afford the allylic alcohol 23 as the B unit equivalent.
Compound 23 was characterized from its 1H and
13C NMR spectra (Figures II.1.4. and
II.1.5.). This simple protocol of converting the cyclohexylidenedioxy moiety of 10 into a
one-carbon homologated allylic alcohol has tremendous potential in organic synthesis.
32
Figure II.1.4. 1H NMR spectrum of 23.
Figure II.1.5. 13
C NMR spectrum of 23.
33
Figure II.1.6. 1H NMR spectrum of 24.
Figure II.1.7. 13
C NMR spectrum of 24.
34
Besides its IR bands at 3475 cm-1
(OH), and at 997 and 925 cm-1
(terminal alkene), its
1H NMR resonances at δ 4.01-4.07 (allylic carbinol) along with the olefinic multiplets at
δ 4.93-5.23 (2H) and 5.74-5.95 (1H) confirmed its formation.
The compounds 23 and 18 were subsequently coupled by a cross metathesis reaction.
The olefin metathesis reactions, pioneered by Yves Chauvin, Robert H. Grubbs, and Richard
R. Schrock have turned out to be promising strategies for the construction of C-C bonds.37
Different versions of the reaction viz. cross metathesis (CM), ring-opening metathesis
(ROM), ring-closing metathesis (RCM), ring-opening metathesis polymerization (ROMP),
acyclic diene metathesis (ADMET) and ethenolysis have assumed major significance in the
chemical industries, as these create fewer undesired by-products and hazardous wastes than
alternative organic reactions. Moreover, these entail easy synthesis of new and known
molecules to streamline the development and industrial production of pharmaceuticals,
plastics and other materials at lower costs. In view of these, the inventors collectively
received the 2005 Nobel Prize in Chemistry.38
Our group has successfully utilized cross
metathesis of terminal alkenes to formulate efficient syntheses of three hydroxy fatty
acids,29h,i
while the ring-closing metathesis reaction has been used to construct several
macrolides (presented in Chapter III).39
In the present synthesis, the alcohol 23 was subjected
to a cross-metathesis reaction with the ester 18 in the presence of Grubbs' II catalyst to
furnish the desired alcohol 24 (63%, based on 18) along with the unreacted substrates 18 and
23. The homo-dimerized product of 18 was also obtained in 10-12% yields respectively. We
used the alcohol 23 in excess, as its dimerized product was expected to be highly polar, to
ensure easy separation from the alcohol 24. The 1H NMR olefinic multuplets at δ 5.68-5.72
(2H) in place of the terminal olefinic resonances along with other relevant NMR signals
confirmed its structure (1H and
13C NMR spectra shown in Figures II.1.6. and II.1.7.).
Increasing steric bulk through addition of a hydroxyl protection often reduces the cross-
35
metathesis reactivity of the alkenols.37f
Hence we used the unprotected alcohol 23 directly for
the metathesis reaction. This also helped to avoid the additional carbinol
protection/deprotection steps. Desilylation of the compound 24 with Bu4NF afforded the ester
25 (IR OH band at 3435 cm-1
and absence of the TBDPS NMR resonances), which on
alkaline hydrolysis furnished the trihydroxy acid Id. It showed IR bands at 3630-3550 and
1729 cm-1
, typical of the –COOH functionality.
CHOO
Oi
10
Scheme II.1.2.
OR
O
O
11 R = H12 R =TBDPS
OR
CO2EtOH
CH3(CH2)7
OR
ii,88%
iii
ix
xii
(CH2)7CH3
OR
O
O
OTBDPS
O
O
R
13 R = CH2OH
14 R =CHOiv,81%
v
vi
OTBDPS
HO
OH
CO2Et
17
OTBDPS
O
O
CO2Et
15
OTBDPS
CO2Et
18
10
viii
2119 R = H20 R =TBDPS
ii,86%
vii(CH2)7CH3
OTBDPS
HO
OH
22
(CH2)7CH3
OTBDPS
O
x
23
(CH2)7CH3
OTBDPS
OH
24 R = TBDPS25 R =H
xiii,87%
OTBDPS
O
O
CO2Et
16
vii
xi
84% 93% 91%
~quant.81% 75%
86% 84% 79%
81% 63%
xiii
95%
(6S,9R,10S)-Id
i) Allyl bromide/Ga/[bmim][Br]/4 h, (ii) TBDPSCl/imidazole/DMAP/CH2Cl2/25oC/10 h, iii) BMS/THF/
0o C/3 h; aqueous NaOH/H2O2/0 to 25oC/15 h, (iv) PCC/NaOAc/CH2Cl2/0
oC/3 h, v) NaH/THF
/(EtO)2P(O)CH2CO2Et/0 to 25oC/18 h, vi) H2/10% Pd-C/EtOH/25 oC/22 h, (vii) Aqueous 80%
TFA/CH2Cl2/0oC/3 h/25 oC/18-24 h, (viii) p-TsCl/pyridine/0 to 25 oC/24 h (89%); Zn/NaI/DMF/80
oC/4 h, (ix) CH3(CH2)7Li/THF/-78 to 25oC/3 h, (x) p-TsCl/pyridine/0 oC/18 h; K2CO3/MeOH/25
oC/3
h, xi) Me3SI/n-BuLi/THF/-40oC/4 h/25 oC/12 h, (xii) 18/Grubbs' II/CH2Cl2/25
oC/22 h, (xii) Bu4NF/
THF/0 oC/3 h, (xiii) Ethanolic KOH/25 oC/4 h.
36
II.2. ASYMMETRIC SYNTHESIS OF THE HYDROXY ACID SEGMENT OF
SCHULZEINES B and C
II.2.1. Introduction
The tetrahydroisoquinoline alkaloids, schulzeines A-C (II-IV) were isolated by a
bioassay-guided screening of the hydrophilic extract of the marine sponge Penares schulzei,
and found to inhibit yeast α-glucosidase with IC50 values of 48-170 nM and viral
neuraminidase with IC50 values ~ µM.40
The chemical structures of schluzeines as well as the
relative stereochemistries of their stereogenic centres were elucidated by chemical
degradation and extensive 2D-NMR studies. The Mosher method was used to establish their
absolute configurations. Schulzeines encompass the 9,11-tetrahydroisoquinoline
constellation, comprising of a fused δ-lactam ring (A) and a C28 sulfated fatty acid side chain
(B) linked via an amide bond (Figure II.2.1.).41
II: Schulzeine A: R = Me, (11bR); III Schulzeine B: R = H, (11bS);IV: Schulzeine C: R = H, (11bR)
N
HO
OH
O
NH
O
OSO3Na
OSO3Na
OSO3Na
9
5
R
Figure II.2.1. Chemical structures of schulzeines A-C.
Schulzeines B and C differ in the stereochemistry at the C-11b of the
tetrahydroisoquinoline moiety, while schulzeine A possesses an additional C-20 methyl
substitution in the fatty acid chain. More recently, the stereochemistry of this stereogenic
centre in schulzeine A has been revised.42
Although the pharmacophore of the schluzeines
has not been identified so far, their O-sulfated fatty acid segment is structurally related to
other glucosidase inhibitors, including penasulfate43a
and the penarolides.43b
The glycosidase
inhibitors are of importance in drug development because of their profound effect on
glycoprotein processing, oligosaccharide metabolism, and cell-cell and cell-virus recognition
37
processes.44
In particular, the α-glucosidase inhibitors are potential therapeutics for the
treatment of viral diseases, cancer, and diabetes.45
II.2.2. Previous Syntheses
The intriguing bioactivity combined with the unique structure of schulzeines aroused
a few synthetic efforts towards these targets.46
Of these, the first synthesis targeted the
tetrahydroisoquinoline subunit of schulzeines only,46a
hence not discussed. The two other
routes were similar, both using Sharpless' asymmetric dihydroxylation (ADH) and
asymmetric ketone reduction for installing the stereogenic centres.
In one of these (Scheme II.2.1.),46b
the aldehyde 26 was two-carbon homologated by
Wittig reaction with a suitable phosphorane and subjected to an ADH reaction with the AD-
mix-β reagent to obtain 27. After protecting its diol moiety as an acetonide, the compound
was converted to the aldehyde 28 by DIBAL-H reduction of its ester group. In a parallel
sequence, the diacid 29 was converted to the ester 30 by borane reduction, benzylation and
esterification. This was converted to the phosphonate 31 by an n-BuLi-mediated
condensation with MeP(O)(OMe)2. A Horner-Emmons reaction between 31 and 28 followed
by a BINAL-H mediated asymmetric ketone reduction furnished 32. Its MOM protection,
catalytic hydrogenation, IBX oxidation followed by Pinnick oxidation afforded the
schulzeines B and C segment 33.
38
CH3(CH2)9CHOCH3(CH2)9
CO2Et
OH
OH
i,ii iii,iv CH3(CH2)9CHO
O
O
HO2C(CH2)12CO2H BnO(CH2)13COCH2P(O)(OMe)2BnO(CH2)13CO2Me
2627 28
29 30 31
CH3(CH2)9
O
O
32
(CH2)13OBn
OH
CH3(CH2)9
O
O
(CH2)12CO2H
OMOM
33
i) Ph3P=CHCO2Et/benzene, ii) AD-mix /tert-BuOH-H2O, iii) 2,2-Dimethoxypropane/PTS,
iv) DIBAL-H/CH2Cl2, v) BH3.Me2S/THF, vi) BnCl/KOH/reflux, vii) MeOH/PTS/reflux, viii)
MeP(O)(OMe)2/n-BuLi/THF/-78oC, ix) DBU/LiCl/MeCN/28, x) (S)-BINAL-H/THF/-78 oC,
xi) MOMCl/Hünig's base/CH2Cl2, xii) H2/Pd(OH)2-C/EtOAc, xiii) IBX/DMSO, xiv) NaClO2/
NaH2PO4.2H2O/tert-BuOH-H2O/2-methyl-2-butene.
Scheme II.2.1.
v-vii viii
ix,x xi-xiv
In another synthesis, (Scheme II.2.2.),46c
the alcohol 34 was converted to the
corresponding bromide, used for γ-allylation of methyl acetoacetate and the resultant β-
ketoester subjected to asymmetric catalytic hydrogenation to furnish 35. Its ADH reaction
with the AD-mix-α reagent and silyl protection of the resultant triol gave the ester 36. Its
DIBAL-H reduction followed by a Wittig reaction with a suitable phosphonium salt and
catalytic hydrogenation produced the target schulzeine segment 37.
39
II.2.3. Present Work
The primary aim of the present work was to formulate a simple and efficient
asymmetric synthesis of the common C28-hydroxyalkyl ester unit 53 of the schulzeines B and
C. We chose compound 53 as the target, as it can be easily converted to schulzeines B and C
by amidation of the required isoquinoline core and a late stage trisulfation. To this end, an
enantio-convergent synthesis of 53 was conceived using a cross metathesis reaction between
the building blocks B1 and B
2 (Figure II.2.2.). A similar strategy was also used in the
synthesis of Id. We envisaged that the required building blocks can be individually
synthesized by a biocatalytic route, and using the aldehyde 10 respectively.
III/IV: Schulzeine B (11bS)/Schulzeine C (11bR)
N
HO
OH
O
NH
O
OSO3Na
OSO3Na
OSO3Na
9
5
EtO
O
OSO3Na
OSO3Na
OSO3Na
9
5
B1
EtO
O
OH9 OH
OH5
+
B2
B
Figure II.2.2. Retrosynthesis of the polyol segment of the schulzeines B and C.
As per the synthetic plan (Scheme III.2.3.), the commercially available diol 38 was
monosilylated with TBDPSCl/DMAP to furnish compound 39. Its formation was revealed
from the 1H NMR
tert-butyl singlet at δ 1.04 (9H) along with the aromatic multiplets at δ
7.25-7.41 (6H) and δ 7.64-7.69 (4H) for the TBDPS group. This on PCC oxidation afforded
the aldehyde 40 (IR CHO stretching bands at 2712 and 1726 cm-1
, 1H NMR
triplets at δ 9.75
(J = 1.2 Hz) and 13
C peak at δ 203.0). Its reaction with vinylmagnesium bromide afforded
the allylic alcohol (±)-41, which was characterized from the 1H NMR
terminal olefinic
signals at δ 5.06-5.26 (2H) and δ 5.78-5.98 (1H).
40
For its resolution, a lipase-catalyzed trans-acetylation appeared promising. We were
particularly interested in the lipase preparation, Novozym 435®
due to its ability in resolving
methylcarbinols,29g
and allylic alcohols,29h
as observed from our group. The choice of the
inexpensive vinyl acetate as the acyl donor was to ensure irreversibility in the acylation
reaction. Also, it assists in easy isolation of the products, since it is volatile. True to our
expectation, the alcohol (±)-41 could be efficiently resolved with Novozym 435®
/vinyl
acetate to obtain the (S)-acetate 42 (96% ee) and (R)-41 (91% ee) at ~50% conversion (5.5 h).
CHOO
O vii
10
HO(CH2)12OH TBDPSO(CH2)11X
38 39 X = CH2OH
40 X = CHO
(R)-41 +
42 (96% ee)
(CH2)9CH3
OR
O
O
46 R = H47 R =Bn
(CH2)9CH3
OBn
HO
OH
48
x,xi
49
50
ii,92%
iii iv
viii,93%
ix
xiii
(CH2)11OTBDPS
OH41
(CH2)11OTBDPS
OAc
i
(CH2)9CH3
OBn
O
xii(CH2)9CH3
OBn
OH
xiv(CH2)10
OAc
OH
CH3(CH2)9
OBn
CO2Et
xv(CH2)12CO2Et
OAc
OH
CH3(CH2)9
OH
(CH2)12CO2Et
OH
OH
CH3(CH2)9
OH
51
52
v, 93% (CH2)10X
OAc
43 X = CH2OH
44 X =CH0ii,88%
vi
45
53
from 42
Scheme II.2.3.
68% 77% 50%
77%
81% 75% 67%
88%61%80%
91%
(91% ee)
i) TBDPSCl/imidazole/DMAP/CH2Cl2/25 oC/8 h (68%), ii) PCC/NaOAc/CH2Cl2/25 oC/3 h (40: 92%; 44: 88%),
iii) CH2=CHMgBr/THF/25 oC/6 h (77%), iv) Vinyl acetate/Novozym 435/25 oC/26 h (50%), v) Bu4NF/ THF/0 to
25 oC/3 h (93%), vi) NaH/THF/(EtO)2P(O)CH2CO2Et/0 to 25 oC/18 h (77%), vii) CH3(CH2)9Li/ THF/-78 oC/3 h
(81%), viii) NaH/THF/BnBr/Bu4NI/4 h (93%), ix) Aqueous 2N HCl/25 oC/6 h (75%), x) TMSCl/EtOAc/-20 oC/20
min; MsCl/Et3N/-20 oC/30 min; aqueous 2N HCl/25 oC/1 h (79%), xi) K2CO3/MeOH/25 oC/3 h (84%), xii)
Me3SI/BuLi/THF/-40 oC/1 h, -40 oC/3 h then 25 oC/12 h (80%), xiii) 45/Grubbs' II catalyst/CH2Cl2/25 oC/22 h
(61% based on 50), xiv) H2/10% Pd-C/EtOH/25 oC (88%), xv) Amberlyst 15®/EtOH/25 oC/18 h (91%).
(CH2)10
OAc
CO2Et
The IR spectrum of 42 showed an IR peak at 1740 cm-1
, and its 1H NMR
and
13C
spectra revealed peaks at δ 2.04 (s, 3H) and at δ 170.2 respectively, characteristic of the
41
acetate functionality. For determining the % ees of the products, a part of the acetate (S)-42
was hydrolyzed with KOH/MeOH to furnish the alcohol (S)-41. The % ees of the
enantiomeric alcohols (R)- and (S)-41 were determined from the relative intensities of the
methoxyl resonances of the corresponding MTPA esters, prepared using (R)-α-
methoxytrifluoromethyl phenylacetyl (MTPA) chloride.14b
The acetate 42 was desilylated with Bu4NF to furnish the primary alcohol 43 (absence
of NMR peaks for the TBDPS group), which was used for the synthesis of the building block
45 (B1 equivalent). For assigning the configuration of 42, a part of the alcohol 43 was
mesylated and subsequently reduced with LiAlH4 to furnish (S)-tetradec-1-en-3-ol.
Comparison of its optical rotation with the reported value established its configuration.47
Next, the alcohol 43 was oxidized with PCC to furnish the aldehyde 44 (IR: 2716, 1737 cm-1
;
1H NMR triplets at δ 9.72 and
13C NMR peak at δ 202.1). This on a Wittig-Horner reaction
with triethyl phosphonoacetate furnished the conjugated ester 45. Its IR spectrum showed IR
bands at 1739 (ester), 1722 (OAc) and 982 (E-alkene) cm-1
in place of the CHO bands.
Likewise, its 1H NMR doublets at δ 5.79 with a J-value of 15.8 Hz ascertained the E-
geometry of the incipient olefin function. The 1H and
13C NMR spectra of 45 are shown in
Figures II.2.3. and II.2.4.
For the other building block 50 (B2 equivalent), following our own methodology,
35
the aldehyde 10 was reacted with CH3(CH2)9Li to furnish the anti-triol derivative 46 almost
exclusively (dr: = 96:4). Use of the corresponding Grignard reagent produced a 22:78
mixture of syn/anti triol derivative. The stereochemically pure anti-compound 4648
was easily
obtained by column chromatography. Its 2,3-anti-stereochemistry was confirmed from the 1H
NMR resonances of the carbinol protons that appeared at δ 3.63 (t, 1H) and δ 3.87-3.97 (m,
3H). For the corresponding syn-isomer, these appeared at δ 3.46-3.48, δ 3.68-72 and δ 3.94-
4.02 as 1:1:2 multiplets.48
The reaction of 46 with benzyl bromide (BnBr) and Bu4NI in the
42
Figure II.2.3. 1H NMR spectrum of 45.
Figure II.2.4. 13
C NMR spectrum of 45.
43
presence of NaH produced compound 47. The 1H NMR signals at δ 4.51-4.73 (m, 2H)
and at δ 7.29-7.34 (m, 5H) accounted for its Bn group. This on an acid (aqueous HCl)-
catalyzed deacetalization furnished the diol 48 that showed absence of NMR resonances for
the cyclohexylidene moiety and presence of an IR band at 3398 cm-1
. Its reaction with
trimethylsilyl chloride (TMSCl) in the presence of Et3N in EtOAc followed by mesylation of
the resultant product with mesyl chloride (MsCl), and subsequent desilylation with aqueous
HCl furnished the intermediate C-2 mesylate. After isolation, this was treated with K2CO3 in
MeOH to furnish the epoxide 49 with inversion of configuration at C-2. The characteristic
features of its epoxy group were the 1H NMR resonances at δ 2.48-2.52 (dd, 1H), δ 2.79 (t,
1H) and δ 2.99-3.06 (m, 2H), along with the 13
C NMR peaks at δ 43.1 and δ 55.1. The
epoxide 49 was subsequently one-carbon homologated with Me3SI/n-BuLi, as before to
obtain the allylic alcohol 50. Appearance of the 1H NMR 2:1 multiplets at δ 5.21-5.41 and δ
5.84-5.95 and the 13
C NMR peaks at δ 116.8 and δ 127.8 were indicative of its terminal
alkene group.
In the final sequence of reactions, the alcohol 50 was subjected to a cross-metathesis
reaction with the allylic acetate 45 in the presence of Grubbs' II catalyst to furnish the desired
alcohol 51 (61%, based on conversion of 50) along with the unreacted alcohols 45 and 50.
The homo-dimerized products of 45 and 50 were obtained in trace amounts. We used the
alcohol 50 in excess in view of its easy availability. Further, its dimerizaton (if any) would
produce a highly polar product, which can be easily separated from the alcohol 51. As before,
the unprotected alcohol 50 was used directly for the metathesis reaction to ensure good
reactivity. The 1H NMR resonances of the newly generated olefinic protons and that at C-2
position appeared together as complex multiplets, precluding the assignment of the geometry
of the newly generated olefin function. However, this was not important for the present
synthesis. Catalytic hydrogenation of 51 gave the acetoxy ester 52 (absence of olefin NMR
44
Figure II.2.5. 1H NMR spectrum of 52.
Figure II.2.6. 13
C NMR spectrum of 52.
45
resonances, shown in Figures II.2.5. and II.2.6.), which was converted to the target hydroxy
ester 53 by an acid (Amberlyst 15®
)-catalyzed trans-esterification with ethanol. Its 1H and
13C NMR resonances were commensurate with its structure.
II.3. EXPERIMENTAL SECTION
General experimental details
The chemicals (Fluka and Lancaster) were used as received. Other reagents were of
AR grade. All anhydrous reactions were carried out under an Ar atmosphere, using freshly
dried solvents. The organic extracts were dried over anhydrous Na2SO4. The IR spectra as
thin films were scanned with a Jasco model A-202 FT-IR spectrometer. The 1H NMR and
13C
NMR spectra were recorded with a Bruker (200/300/400/500/700 MHz) spectrometers. The
optical rotations were recorded with a Jasco DIP 360 digital polarimeter. The chemical
purities of the compounds were determined by CHN analyses with an elemental analyzer
(vario Micro cube, Elementar, Germany).
(2R,3S)-1,2-Cyclohexylidenedioxy-5-hexene-3-ol 11.
A mixture of Ga metal (0.690 g, 10 mmol) and allyl bromide (1.45 g, 12.0 mmol) in
[bmim][Br] (30 mL) was stirred at room temperature for 0.5 h, followed by addition of 10
(1.7 g, 10 mmol). After stirring at room temperature for 4 h, the mixture was extracted with
Et2O (2 × 20 mL), the ether extract evaporated in vacuo and the residue purified by column
chromatography (silica gel, 0-15% EtOAc/hexane) to obtain 11 (1.7 g, 81%). colourless oil;
[α]D24
+10.2 (c 1.38, CHCl3); IR: 3453, 1642, 1101, 1044 cm-1
; 1H NMR: δ 1.36-1.38 (m,
2H), 1.55-1.59 (m, 8H), 2.13-2.33 (m overlapped with broad s, 3H), 3.71-3.79 (m, 1H), 3.88-
46
4.01 (m, 3H), 5.13-5.16 (m, 2H), 5.75-5.88 (m,1H); 13
C NMR: δ 24.1, 24.3, 25.5, 35.2, 36.6,
38.0, 65.2, 71.0, 78.0, 110.0, 118.6, 134.4.
(4S,5R)-4-tert-Butyldiphenylsilyloxy-5,6-cyclohexylidenedioxyhex-1-ene 12.
To a stirred and cooled (-30 °C) solution of the mixture of 11 (1.48 g, 6.95 mmol), imidazole
(0.80 g, 11.80 mmol) and DMAP (catlytic) in CH2Cl2 (25 mL) was dropwise added TBDPSCl
(2.86 g, 10.4 mmol) in CH2Cl2 (10 mL). After stirring the mixture for 10 h at room
temperature, it was poured into ice cold H2O (25 mL), the organic layer was separated and
the aqueous portion extracted with CHCl3 (2 × 15 mL). The combined organic extracts were
washed with H2O (2 × 10 mL) and brine (1 × 5 mL), and dried. Removal of solvent in vacuo
followed by purification of the residue by column chromatography (silica gel, 0-5%
EtOAc/hexane) afforded pure 12 (2.8 g, 88%). colorless oil; [α]D24
+16.8 (c 1.13, CHCl3); IR:
3070, 1639 cm-1
; 1H NMR: δ 1.07 (s, 9H), 1.38-1.44 (m, 2H), 1.50-1.64 (m, 8H), 2.12-2.21
(m, 2H), 3.68-3.79 (m, 1H), 3.89-3.96 (m, 2H), 4.04-4.09 (m, 1H), 4.87-4.99 (m, 2H), 5.74-
5.78 (m, 1H), 7.36-7.44 (m, 6H), 7.67-7.76 (m, 4H); 13
C NMR: δ 19.3, 23.8, 23.9, 25.2, 26.9,
34.8, 36.1, 38.7, 65.8, 73.1, 77.3, 109.2, 117.4, 127.4, 127.5, 129.6, 129.7, 133.5, 133.8,
133.9, 135.9. Anal. Calcd. for C28H38O3Si: C, 74.62; H, 8.50%. Found: C, 74.48; H, 8.36%.
(4S,5R)-4-tert-Butyldiphenylsilyloxy-5,6-cyclohexylidenedioxyhexan-1-ol 13.
To a stirred and cooled (0 °C) solution of 12 (3.52 g, 7.82 mmol) in THF (20 mL) was added
BMS (0.52 mL, 5.2 mmol), and the mixture stirred for 3 h at the same temperature. Aqueous
47
3N NaOH (3.13 mL) was added into it at 0 oC, followed by H2O2 (30%, 3.13 mL). After
stirring for 3 h at 0 oC and 12 h at room temperature, the mixture was extracted with EtOAc
(3 × 15 mL). The combined organic extracts were washed with H2O (2 × 10 mL), aqueous
10% HCl (1 × 10 mL), H2O (2 × 10 mL) and brine (1 × 5 mL), and dried. Solvent removal
followed by column chromatography (silica gel, 0-15% EtOAc/hexane) of the residue
furnished 13 (3.4 g, 93%). colorless oil; [α]D25
+3.4 (c 1.13, CHCl3); IR: 3433 cm-1
; 1H NMR:
δ 1.04 (s, 9H), 1.32-1.39 (m, 2H), 1.41-1.52 (m, 13H), 3.39 (t, J = 6.2 Hz, 2H), 3.64-3.72 (m,
1H), 3.78-3.83 (m, 1H), 3.92-4.13 (m, 2H) 7.32-7.47 (m, 6H), 7.64-7.77 (m, 4H); 13
C NMR:
δ 19.4, 23.8, 23.9, 25.1, 26.9, 27.2, 30.2, 34.8, 36.1, 60.4, 62.7, 66.8, 73.6, 109.5, 127.5,
129.7, 133.5, 133.9, 135.8, 135.9. Anal. Calcd. for C28H40O4Si: C, 71.75; H, 8.60%. Found:
C, 71.64; H, 8.78%.
(4S,5R)-4-tert-Butyldiphenylsilyloxy-5,6-cyclohexylidenedioxyhexanal 14.
To a cooled (0 °C) and stirred suspension of PCC (1.90 g, 8.82 mmol) and NaOAc (10
mol%) in CH2Cl2 (20 mL) was added the alcohol 13 (2.70 g, 5.77 mmol) in one lot. After
stirring for 3 h, the reaction mixture was diluted with Et2O (30 mL) and the supernatant
passed through a pad of silica gel (2'' x 1''). Removal of solvent in vacuo followed by column
chromatography of the residue (silica gel, 0-10% EtOAc/hexane) furnished pure 14 (2.2 g,
81%). colorless oil; [α]D24
+7.7 (c 1.24, CHCl3); IR: 2714, 1729 cm-1
; 1H NMR: δ 1.04 (s,
9H), 1.32-1.36 (m, 2H), 1.45-1.52 (m, 8H), 1.81-1.88 (m, 2H), 2.25-2.54 (m, 2H), 3.48-3.62
(m, 1H), 3.67-3.77 (m, 1H), 3.88-4.00 (m, 2H), 7.34-7.43 (m, 6H), 7.62-7.68 (m, 4H), 9.14 (t,
J = 1.2 Hz, 1H); 13
C NMR: δ 19.4, 23.8, 25.1, 26.3, 26.9, 34.7, 36.1, 38.8, 67.2, 73.3, 77.6,
48
109.7, 127.7, 129.8, 133.3, 133.5, 135.9, 202.2. Anal. Calcd. for C28H38O4Si: C, 72.06; H,
8.21%. Found: C, 72.21; H, 8.18%.
Ethyl (6S,7R)-6-tert-Butyldiphenylsilyloxy-7,8-cyclohexylidenedioxyoct-2E-enoate 15.
To a stirred suspension of pentane-washed NaH (0.444 g, 9.24 mmol, 50% suspension in oil)
in THF (20 mL) was added triethyl phosphonoacetate (1.85 mL, 9.24 mmol) in THF (5 mL).
After 15 min, when the solution became clear, the mixture was cooled to 0 oC, and the
aldehyde 14 (2.15 g, 4.61 mmol) in THF (5 mL) was dropwise added into it. After stirring at
room temperature for 18 h, the mixture was poured into ice-water and extracted with Et2O (3
× 20 mL). The ether layer was washed with H2O (2 × 10 mL) and brine (1 × 5 mL), dried,
and concentrated in vacuo to get a residue, which on column chromatography (silica gel, 0-
10% Et2O/hexane) furnished pure 15. Yield: 2.3 g (91%); colorless oil; [α]D24
+12.7 (c 1.07,
CHCl3); IR: 1716, 997 cm-1
; 1H NMR: δ 1.04 (s, 9H), 1.22 (t, J = 7.2 Hz, 3H), 1.33-1.37 (m,
2H), 1.45-1.59 (m, 8H), 1.65-1.76 (m, 2H), 2.12-2.21 (m, 2H), 3.58-3.66 (m, 1H), 3.70-3.76
(m, 1H), 3.90-4.05 (m, 2H), 4.14 (q, J = 7.2 Hz, 2H), 5.66 (d, J = 16.0 Hz, 1H), 6.71-6.79 (m,
1H), 7.32-7.43 (m, 6H), 7.62-7.68 (m, 4H); 13
C NMR: δ 14.2, 19.3, 23.7, 23.8, 25.0, 26.9,
32.1, 34.7, 36.0, 59.9, 67.0, 73.5, 77.4, 109.5, 121.1, 127.5, 129.7, 133.3, 133.6, 135.7, 135.8,
148.7, 166.5. Anal. Calcd. for C32H44O5Si: C, 71.60; H, 8.26%. Found: C, 71.44; H, 8.48%.
Ethyl (6S,7R)-6-tert-Butyldiphenylsilyloxy-7,8-cyclohexylidenedioxyoctanoate 16.
49
A mixture of 15 (1.3 g, 2.42 mmol) and 10% Pd-C (0.05 g) in EtOH (10 mL) was
magnetically stirred at 25 oC for 22 h under a positive pressure of H2. The mixture was
diluted with Et2O (30 mL) and passed through a small pad of silica gel. Removal of solvent in
vacuo furnished pure 16 (1.2 g, ~quant.). colorless oil; [α]D24
+7.7 (c 1.06, CHCl3); IR: 1735
cm-1
; 1H NMR: δ 1.04 (s, 9H), 1.23 (t, J = 7.2 Hz, 3H), 1.20-1.48 (m, 8H), 1.50-1.60 (m, 8H),
2.07-2.15 (m, 2H), 3.63-3.78 (m, 2H), 3.89-3.97 (m, 2H), 4.08 (q, J = 7.2 Hz, 2H), 7.32-7.42
(m, 6H), 7.63-7.70 (m, 4H); 13
C NMR: δ 14.1, 19.3, 23.6, 23.7, 23.8, 24.8, 25.1, 26.9, 33.6,
34.1, 34.7, 36.0, 60.0, 66.5, 73.5, 77.5, 109.3, 127.5, 129.6, 133.5, 134.0, 135.8, 173.5. Anal.
Calcd. for C32H46O5Si: C, 71.33; H, 8.61%. Found: C, 71.34; H, 8.47%.
Ethyl (6S,7R)-6-tert-Butyldiphenylsilyloxy-7,8-dihydroxyoctanoate 17.
A mixture of 16 (1.20 g, 2.23 mmol) in CH2Cl2 (15 mL) and aqueous 80% TFA (8 mL) was
stirred at 0 oC for 3 h and at 25
oC till completion of the reaction (cf. TLC, 24 h). Most of the
solvent was removed in vacuo, the residue diluted with H2O (30 mL) and extracted with
EtOAc (3 × 20 mL). The combined organic extracts were washed successively with H2O (3 ×
10 mL), aqueous 10% NaHCO3 (2 × 10 mL), H2O (2 × 10 mL) and brine (1 × 5 mL), and
dried. Solvent removal followed by column chromatography (silica gel, 0-5% MeOH/CHCl3)
of the residue gave pure 17 (0.830 g, 81%). colorless oil; [α]D25
+26.5 (c 1.08, CHCl3); IR:
3455, 1731 cm-1
; 1H NMR: δ 1.06 (s, 9H), 1.23 (t, J = 7.2 Hz, 3H), 1.32-1.43 (m, 6H), 2.04-
2.12 (m, 2H), 2.43 (broad s, 2H), 3.63-3.72 (m, 3H), 3.80-3.84 (m, 1H), 4.07 (q, J = 7.2 Hz,
2H), 7.36-7.47 (m, 6H), 7.64-7.70 (m, 4H); 13
C NMR: δ 14.2, 19.4, 24.7, 27.0, 29.7, 32.5,
33.9, 60.2, 63.1, 73.4, 75.1, 127.6, 127.8, 129.9, 133.0, 133.5, 135.8, 173.6. Anal. Calcd. for
C26H38O5Si: C, 68.08; H, 8.35%. Found: C, 67.86; H, 8.53%.
50
Ethyl (6S)-6-tert-Butyldiphenylsilyloxyoct-7-enoate 18.
To a cooled (0 oC) and stirred solution of 17 (0.820 g, 1.79 mmol) in pyridine (8 mL) was
added p-TsCl (0.750 g, 3.94 mmol). The reaction mixture was brought to room temperature
and stirred for 24 h. It was poured in ice-cold water (30 mL) and extracted with EtOAc (2 ×
15 mL). The combined organic extracts were washed successively with H2O (2 × 10 mL),
aqueous 2N HCl (2 × 10 mL), H2O (2 × 10 mL) and brine (1 × 5 mL), and dried. Solvent
removal followed by column chromatography (silica gel, 0-10% EtOAc/hexane) of the
residue gave the pure ditosylate as a mixture of rotamers (1.22 g, 89%). colorless oil; [α]D24
+20.9 (c 1.03, CHCl3); IR: 1370, 1177 cm-1
; 1H NMR: δ 1.00 (m, 9H), 1.23-1.51 (m, 7H),
1.60-1.80 and 1.90-2.10 (m, 2H), 2.45 (s, 6H), 3.80-3.88 (m, 1H), 4.03-4.28 (m, 3H), 4.34-
4.43 (m, 1H), 4.56-4.70 (m, 1H), 7.30-7.48 (m, 8H), 7.50-7.69 (m, 10H); 13
C NMR: δ 14.2,
19.3, 21.7, 24.3, 26.8, 33.5, 33.8, 60.2, 67.0, 73.7, 80.8, 127.5, 127.7, 127.9, 128.1, 129.9,
130.0, 135.7, 136.1, 144.9, 145.1, 172.7.
A mixture of the above compound (1.22 g, 1.59 mmol), NaI (1.43 g, 9.53 mmol) and
Zn-dust (0.650 g, 10.0 mmol) in DMF (10 mL) was heated at 90 oC for 8 h (cf. TLC). The
mixture was brought to room temperature, poured in H2O (30 mL) and extracted with Et2O (3
× 15 mL). The combined organic extracts were washed successively with 10% aqueous
Na2S2O3 (1 × 10 mL), H2O (3 × 10 mL) and brine (1 × 5 mL), and dried. Solvent removal
followed by column chromatography (silica gel, 0-10% Et2O/hexane) of the residue gave
pure 18 (0.565 g, 84%). colorless oil; [α]D24
+21.3 (c 1.01, CHCl3); IR: 1735, 997 cm-1
; 1H
NMR: δ 1.05 (s, 9H), 1.23 (t, J = 7.2 Hz, 3H), 1.39-1.58 (m, 6H), 2.16 (t, J = 7.0 Hz, 2H),
4.08 (q, J = 7.2 Hz, 2H), 4.92-5.01 (m, 3H), 5.70-5.80 (m, 1H), 7.33-7.38 (m, 6H), 7.61-7.68
(m, 4H); 13
C NMR: δ 14.2, 19.3, 23.9, 24.8, 26.9, 34.2, 37.0, 60.1, 74.3, 114.3, 127.3, 127.4,
51
129.4, 129.5, 134.1, 134.3, 135.8, 135.9, 140.6, 173.6. Anal. Calcd. for C26H36O3Si: C, 73.54;
H, 8.54%. Found: C, 73.78; H, 8.71%.
(2R,3S)-1,2-Cyclohexylidenedioxyundecan-3-ol 19.
To a cooled (-78 oC) and stirred solution of C8H17Li [prepared from 1-bromooctane (11.60 g,
60.0 mmol) and Li (0.890 g, 127.1 mmol)] in THF (80 mL) was added 10 (5.10 g, 30.0
mmol) in THF (20 mL). After stirring the mixture for 3 h at -78 oC, it was gradually brought
to room temperature and treated with aqueous saturated NH4Cl, the supernatant was decanted
and the residue washed with Et2O (2 × 20 mL). The combined organic extracts were washed
with aqueous saturated NH4Cl (1 × 10 mL), dried and concentrated in vacuo to get a residue,
which on column chromatography (silica gel, 0-15% EtOAc/hexane) furnished 19 (7.32 g,
86%). colorless oil; [α]D24
+12.6 (c 1.02, CHCl3), (lit.36
[α]D24
+6.2 (c 1.15, CHC13)); IR:
3457 cm-1
; 1H NMR: δ 0.86 (t, J = 6.4 Hz, 3H), 1.17-1.43 (m containing a s at δ 1.21, 16H),
1.56-1.79 (m, 8H), 1.94 (broad s, 1H), 3.70-3.78 (m, 1H), 3.86-3.97 (m, 3H); 13
C NMR: δ
13.9, 22.5, 23.7, 23.9, 25.0, 25.7, 29.1, 29.4, 29.5, 31.7, 32.5, 34.8, 36.0, 63.9, 70.5, 78.2,
109.3. Anal. Calcd. for C17H32O3: C, 71.79; H, 11.34%. Found: C, 71.94; H, 11.50%.
(2R,3S)-3-tert-Butyldiphenylsilyloxy-1,2-cyclohexylidenedioxyundecane 20.
As described earlier, silylation of 19 (2.87 g, 10.10 mmol) with TBDPSCl (3.53 g, 12.85
mmol), imidazole (0.87 g, 12.85 mmol) and DMAP (catalytic) in CH2Cl2 (40 mL), followed
by work up and column chromatography (silica gel, 0-5% EtOAc/hexane) afforded pure 20
52
(4.54 g, 86%). colorless oil; [α]D24
+15.5 (c 1.06, CHCl3); IR: 3072, 3050 cm-1
; 1H NMR: δ
0.89 (t, J = 6.4 Hz, 3H), 1.14-1.38 (m containing a s at δ 1.06, 25H), 1.48-1.72 (m, 8H),
3.66-3.75 (m, 2H), 3.80-3.87 (m, 1H), 3.93-4.10 (m, 1H), 7.34-7.47 (m, 6H), 7.67-7.75 (m,
4H); 13
C NMR: δ 14.1, 19.4, 22.6, 23.8, 23.9, 24.2, 25.2, 26.9, 29.1, 29.3, 29.6, 31.8, 34.1,
34.8, 36.1, 66.4, 73.7, 77.7, 109.3, 127.4, 129.5, 133.8, 134.3, 135.8, 135.9. Anal. Calcd. for
C33H50O3Si: C, 75.81; H, 9.64%. Found: C, 75.74; H, 9.48%.
(2R,3S)-3-tert-Butyldiphenylsilyloxyundecane-1,2-diol 21.
As described earlier, compound 20 (2.87 g, 5.50 mmol) was deacetalized in CH2Cl2 (20 mL)
with aqueous 80% TFA (8.0 mL). Usual work up and column chromatography (silica gel, 0-
5% MeOH/CHCl3) afforded pure 21 (2.0 g, 84%). colorless oil; [α]D24
+21.0 (c 1.04, CHCl3);
IR: 3398 cm-1
; 1H NMR: δ 0.89 (t, J = 6.8 Hz, 3H), 1.09-1.35 (m containing a s at δ 1.10,
21H), 1.45-1.55 (broad m, 4H), 3.65-3.72 (m, 3H), 3.78-3.89 (m, 1H), 7.35-7.49 (m, 6H),
7.68-7.75 (m, 4H); 13
C NMR: δ 14.1, 19.4, 22.6, 24.8, 27.0, 29.1, 29.2, 29.4, 31.7, 32.9, 63.1,
73.6, 75.5, 127.5, 127.7, 129.7, 129.8, 133.1, 133.7, 135.9. Anal. Calcd. for C27H42O3Si: C,
73.25; H, 9.56%. Found: C, 73.14; H, 9.72%.
(2R,3S)-3-tert-Butyldiphenylsilyloxy-1,2-epoxyundecane 22.
Tosylation 21 (1.10 g, 2.49 mmol) with p-TsCl (0.475 g, 2.49 mmol) and pyridine (8 mL),
followed by work-up and column chromatography (silica gel, 0-10% EtOAc/hexane)
furnished the monotosylate (1.30 g, 84%). colorless oil; [α]D24
+19.5 (c 1.16, CHCl3); IR:
3528, 1362, 1177 cm-1
; 1H NMR: δ 0.86 (t, J = 6.8 Hz, 3H), 1.02 (s, 9H), 1.25-1.42 (m, 14H),
2.18 (broad s, 1H), 2.45 (s, 3H), 3.75-3.87 (m, 2H), 3.98-4.04 (m, 1H), 4.21-4.27 (m, 1H),
53
7.31-7.45 (m, 8H), 7.61-7.66 (m, 4H), 7.78 (t, J = 8.0 Hz, 2H); 13
C NMR: δ 14.0, 19.3, 21.5,
22.5, 24.5, 26.9, 28.9, 29.2, 29.3, 31.7, 32.7, 71.3, 71.5, 74.2, 127.4, 127.6, 127.9, 129.8,
132.5, 132.9, 133.5, 135.7, 144.8.
A mixture of the above compound (1.20 g, 2.01 mmol) and anhydrous K2CO3 (0.63 g,
4.58 mmol) in MeOH (10 mL) was stirred for 3 h at room temperature. The supernatant was
decanted, the solid residue washed with EtOAc (20 mL) and the combined organic extracts
concentrated in vacuo. The residue was taken in EtOAc (30 mL) washed with H2O (3 × 15
mL) and brine (1 × 5 mL), dried and concentrated in vacuo. Column chromatography (silica
gel, 0-5% EtOAc/hexane) of the residue gave pure 22 (0.770 g, 90%). colorless oil; [α]D24
+20.2 (c 1.14, CHCl3); IR: 1110 cm-1
; 1H NMR: δ 0.89 (t, J = 6.4 Hz, 3H), 1.08 (s, 9H), 1.22-
1.40 (m, 12H), 1.53-1.59 (m, 2H), 2.11-2.16 (m, 1H), 2.43-2.48 (m, 1H), 2.86-2.91 (m, 1H),
3.37-3.43 (m, 1H), 7.32-7.48 (m, 6H), 7.64-7.72 (m, 4H); 13
C NMR: δ 13.9, 19.2, 22.5, 24.1,
26.7, 29.0, 29.2, 29.5, 31.7, 35.2, 45.9, 54.1, 73.1, 127.3, 127.4, 129.4, 129.5, 133.6, 133.7,
135.7. Anal. Calcd. for C27H40O2Si: C, 76.36; H, 9.49%. Found: C, 76.42; H, 9.27%.
(3R,4S)-4-tert-Butyldiphenylsilyloxydodec-1-en-3-ol 23.
To a cooled (-40 oC) and stirred suspension of Me3SI (1.25 g, 6.13 mmol) in THF (20 mL)
was added n-BuLi (3.0 mL, 1.5 M in hexane, 4.91 mmol). After stirring for 1 h, compound 22
(0.522 g, 1.23 mmol) in THF (5.0 mL) was injected into the mixture, stirring continued at -40
oC for 3 h and at room temperature for 12 h. H2O (15 mL) was added to the mixture, the
organic layer separated, and the aqueous layer extracted with EtOAc (2 × 10 mL). The
combined organic extracts were washed with H2O (1 × 10 mL), and brine (1 × 5 mL), and
dried. Solvent removal followed by column chromatography (silica gel, 0-15%
EtOAc/hexane) of the residue gave pure 23 (0.436 g, 81%). colorless oil; [α]D24
+16.5 (c
54
1.08, CHCl3); IR: 3475, 997, 925 cm-1
; 1H NMR: δ 0.86 (t, J = 6.4 Hz, 3H), 1.08 (s, 9H),
1.14-1.39 (m, 14H), 1.96 (broad s, 1H), 3.48-3.52 (m, 1H), 4.01-4.07 (m, 1H), 4.93-5.23 (m,
2H), 5.74-5.95 (m, 1H), 7.34-7.43 (m, 6H), 7.61-7.65 (m, 4H); 13
C NMR: δ 14.1, 19.3, 22.6,
25.4, 26.9, 29.1, 29.2, 29.4, 31.8, 31.9, 74.3, 77.9, 117.6, 127.4, 127.5, 127.6, 129.7, 129.8,
133.4, 133.6, 135.5, 135.7, 135.9, 136.4. Anal. Calcd. for C28H42O2Si: C, 76.66; H, 9.65%.
Found: C, 76.84; H, 9.48%.
Ethyl (6S,9R,10S)-6,10-Di-tert-butyldiphenylsilyloxy-9-hydroxyoctadeca-7E-enoate 24.
A mixture of 18 (0.97 g, 0.23 mmol), 23 (0.153 g, 0.35 mmol) and Grubbs' II catalyst (5
mol%) in CH2Cl2 (5 mL) was stirred for 22 h under Ar. After concentrating the mixture in
vacuo, the residue was subjected to column chromatography (silica gel, 0-15%
EtOAc/hexane) to give pure 24 (0.120 g, 63% based on 18). colorless oil; [α]D25
+16.3 (c
1.02, CHCl3); IR: 3583, 1736 cm-1
; 1H NMR: δ 0.86 (t, J = 6.8 Hz, 3H), 1.19-1.44 (m
containing a s at δ 1.12, 36H), 1.48-1.74 (m, 6H), 2.16 (t, J = 7.2 Hz, 2H), 3.41-3.48 (m,
1H), 4.01-4.14 (m containing a q at δ 4.07, J = 7.2 Hz, 4H), 5.68-5.72 (m, 2H), 7.35-7.41 (m,
12H), 7.61-7.68 (m, 8H); 13
C NMR: δ 14.1, 14.2, 19.3, 22.6, 23.9, 24.8, 25.5, 26.9, 29.2,
29.4, 31.8, 31.9, 34.2, 37.0, 60.1, 74.2, 74.4, 78.0, 114.3, 127.3, 127.4, 127.6, 129.4, 129.5,
129.7, 129.8, 133.4, 133.7, 134.1, 134.4, 135.5, 135.8, 135.9, 140.6, 173.6. Anal. Calcd. for
C52H74O5Si2: C, 74.77; H, 8.93%. Found: C, 74.98; H, 9.09%.
Ethyl (6S,9R,10S)-6,9,10-Trihydroxyoctadeca-7E-enoate 25.
To a cooled (0 °C) and stirred solution of 24 (0.300 g, 0.36 mmol) in THF (5 mL) was added
Bu4NF (0.57 mL, 1 M in THF, 0.57 mmol). The reaction mixture was brought to room
55
temperature and stirred until the reaction was complete (cf. TLC, 3 h). The mixture was
poured into ice-cold water (15 mL) and extracted with EtOAc (2 × 10 mL). The organic
extract was washed with water (2 × 10 mL) and brine (1 × 5 mL), and dried. Removal of
solvent followed by column chromatography of the residue (silica gel, 0-15% EtOAc/hexane)
furnished 25 (0.112 g, 87%). colorless oil; [α]D24
+3.3 (c 1.22, CHCl3); IR: 3435, 1729 cm-1
;
1H NMR: δ 0.88 (t, J = 6.4 Hz, 3H), 1.22 (t, J = 7.2 Hz, 3H), 1.26-1.39 (m, 14H), 1.42-1.54
(m, 6H), 2.25 (t, J = 7.0 Hz, 2H), 2.50 (broad s, 1H), 2.71 (broad s, 2H), 3.51-3.56 (m, 1H),
4.01-4.17 (m, 4H), 5.56-5.68 (m, 2H); 13
C NMR: δ 14.2, 18.9, 24.8, 26.2, 26.6, 31.2, 31.5,
34.2, 36.5, 37.2, 73.0, 74.2, 75.0, 78.3, 131.2, 137.1, 173.7. Anal. Calcd. for C20H38O5: C,
67.00; H, 10.68%. Found: C, 67.26; H, 10.88%.
(6S,9R,10S)-6,9,10-Trihydroxyoctadeca-7E-enoic acid Id.
A solution of 25 (0.1 g, 0.28 mmol) in aqueous-ethanolic KOH (2M, 5 mL) was stirred at
room temperature for 4 h. Most of the solvent was removed in vacuo, the residue taken in
CHCl3 (10 mL) and the extract washed with water (2 × 5 mL) and brine (1 × 5 mL), and
dried. Removal of solvent followed by preparative thin layer chromatography of the residue
(silica gel, 5% MeOH/CHCl3) furnished pure Id (0.087 g, 95%). semi-solid; [α]D24
+5.7 (c,
0.831, CHCl3) (lit.31
[α]D25
-10.5 (c 0.15, MeOH) for natural Id); IR: 3630-3550, 3488, 1729
cm-1
; 1H NMR: δ 0.86 (t, J = 6.2 Hz, 3H), 1.22-1.39 (m, 14H), 1.40-1.61 (m, 6H), 2.25 (t, J =
6.8 Hz, 2H), 1.83 (broad s, 1H), 2.41 (broad s, 2H), 3.52-3.55 (m, 1H), 4.04-4.10 (m, 2H),
5.56 (dd, J = 15.4, 5.4 Hz, 1H), 5.67 (dd, J = 15.4, 5.4 Hz, 1H); 13
C NMR: δ 14.2, 23.8, 26.4,
26.9, 30.7, 30.8, 31.2, 33.9, 34.2, 37.7, 73.2, 75.0, 76.8, 130.8, 137.0, 177.2.
12-tert-Butyldiphenylsilyloxydodecan-1-ol 39.
56
As described above, 38 (7.0 g, 34.65 mmol) was silylated with TBDPSCl (10.0 g, 36.42
mmol), imidazole (2.82 g, 41.48 mmol), and DMAP (cat.) in CH2Cl2 (50 mL), followed by
work-up and column chromatography (silica gel, 0-15% EtOAc/hexane) to obtain 39 (10.4 g,
68%). colourless oil; IR: 3348, 3071, 3049 cm-1
; 1H
NMR: δ 1.04 (s, 9H), 1.17-1.40 (m,
16H), 1.44 (broad s, 1H), 1.53-1.65 (m, 4H), 3.58-3.67 (m, 4H), 7.25-7.41 (m, 6H), 7.64-7.69
(m, 4H); 13
C NMR: δ 19.2, 25.7, 26.8, 29.4, 29.6, 32.6, 32.7, 63.1, 63.9, 127.5, 129.4, 134.1,
135.5. Anal. Calcd. for C28H44O2Si: C, 76.30; H, 10.06%. Found: C, 76.14; H, 9.88%.
12-tert-Butyldiphenylsilyloxydodecanal 40.
Oxidation of 39 (6.4 g, 14.55 mmol) with PCC (4.71 g, 21.83 mmol) and NaOAc (10 mol%)
in CH2Cl2 (30 mL), followed by usual work-up and column chromatography (silica gel, 0-
10% EtOAc/hexane) furnished pure 40 (5.9 g, 92%). colorless oil; IR: 2712, 1726 cm-1
; 1H
NMR: δ 1.04 (s, 9H), 1.25-1.42 (m, 14H), 1.44-1.62 (m, 4H), 2.37-2.45 (m, 2H), 3.64 (t, J =
6.4 Hz, 2H), 7.34-7.42 (m, 6H), 7.64-7.69 (m, 4H), 9.75 (t, J = 1.2 Hz, 1H); 13
C NMR: δ
19.2, 22.1, 25.7, 26.9, 29.1, 29.4, 29.5, 32.6, 43.9, 64.0, 127.5, 129.5, 134.1, 135.6, 203.0.
Anal. Calcd. for C28H42O2Si: C, 76.66; H, 9.65%. Found: C, 76.48; H, 9.81%.
(±±±±)-14-tert-Butyldiphenylsilyloxytetradec-1-en-3-ol 41.
To a stirred solution of 40 (5.60 g, 12.78 mmol) in THF (25 mL) was slowly added
CH2=CHMgBr (36.5 mL, 25.57 mmol, 0.7 M in THF), and the mixture stirred for 6 h. The
reaction was quenched with aqueous saturated NH4Cl, the mixture filtered and concentrated
in vacuo. The residue was dissolved in Et2O (30 mL), the organic layer washed with H2O (2
× 10 mL) and brine (1 × 5 mL), and dried. Solvent removal in vacuo and column
chromatography (silica gel, 0-10% Et2O/hexane) of the residue afforded (±)-41 (4.6 g, 77%).
57
colorless oil; IR: 3357, 997 cm-1
; 1H NMR: δ 1.04 (s, 9H), 1.26-1.42 (m, 16H), 1.45-1.60 (m,
5H), 3.64 (t, J = 6.4 Hz, 2H), 4.07-4.17 (m, 1H), 5.06-5.26 (m, 2H), 5.78-5.98 (m, 1H), 7.31-
7.44 (m, 6H), 7.64-7.69 (m, 4H); 13
C NMR: δ 19.2, 25.3, 25.7, 26.8, 29.4, 29.6, 32.6, 37.0,
64.0, 73.3, 114.5, 127.5, 129.4, 134.1, 135.5, 141.3. Anal. Calcd. for C30H46O2Si: C, 77.19;
H, 9.93%. Found: C, 77.34; H, 9.78%.
(S)-3-Acetoxy-14-tert-butyldiphenylsilyloxytetradec-1-ene 42. A mixture of (±)-41 (2.0 g,
4.29 mmol), vinyl acetate (5 mL) and Novozym 435®
(0.250 g) was agitated on an orbital
shaker at 110 rpm for 5.5 h. The reaction mixture was filtered, and the solution was
concentrated in vacuo to get a residue, which on column chromatography (silica gel, 0-10%
EtOAc/hexane) gave pure (R)-41 and (S)-42.
(R)-41:
Yield: 0.780 g (39%); colorless oil; [α]D22
-3.0 (c 1.07, CHCl3);
(S)-42:
Yield: 0.960 g (44%); colorless oil; [α]D22
-4.4 (c 1.11, CHCl3); IR: 1740, 1033, 930 cm-1
; 1H
NMR: δ 1.04 (s, 9H), 1.15-1.42 (m, 16H), 1.43-1.65 (m, 4H), 2.04 (s, 3H), 3.65 (t, J = 6.4
Hz, 2H), 5.12-5.26 (m, 3H), 5.69-5.80 (m, 1H), 7.31-7.46 (m, 6H), 7.64-7.69 (m, 4H); 13
C
NMR: δ 19.2, 21.2, 25.1, 25.8, 26.9, 29.4, 29.6, 32.6, 34.2, 64.0, 74.8, 116.5, 127.6, 129.5,
134.1, 135.6, 136.7, 170.2. Anal. Calcd. for C32H48O3Si: C, 75.54; H, 9.51%. Found: C,
75.39; H, 9.37%.
(S)-12-Acetoxytetradec-13-en-1-ol 43.
58
Desilylation of 42 (0.950 g, 1.87 mmol) with Bu4NF (1.87 mL, 1 M in THF, 1.87 mmol) in
THF (5 mL), subsequent work-up and column chromatography (silica gel, 0-15%
EtOAc/hexane) furnished 43 (0.470 g, 93%). colorless oil; [α]D22
-6.1 (c 1.08, CHCl3); IR:
3421, 1738 cm-1
; 1H NMR: δ 1.22-1.39 (m, 16H), 1.52-1.61 (m, 4H), 2.05 (s, 3H), 3.62 (t, J =
6.6 Hz, 2H), 5.16-5.25 (m, 3H), 5.68-5.84 (m, 1H); 13
C NMR: δ 21.2, 25.0, 25.7, 29.3, 29.4,
32.6, 34.1, 62.9, 74.8, 116.4, 136.5, 170.4. Anal. Calcd. for C16H30O3: C, 71.07; H, 11.18%.
Found: C, 70.88; H, 11.07%.
(S)-12-Acetoxytetradecan-13-enal 44.
As described for 14, oxidation of the alcohol 43 (0.800 g, 2.96 mmol) with PCC (0.958 g,
4.44 mmol) and NaOAc (10 mol%) in CH2Cl2 (25 mL), followed by work up gave 44 (0.700
g, 88%). colorless oil; [α]D22
-4.6 (c 1.04, CHCl3); IR: 2716, 1737 cm-1
; 1
H NMR: δ 1.19-
1.32 (m, 14H), 1.56-1.65 (m, 4H), 2.02 (s, 3H), 2.36-2.41 (m, 2H), 5.09-5.21 (m, 3H), 5.67-
5.78 (m, 1H), 9.72 (t, J = 1.5 Hz, 1H); 13
C NMR: δ 21.1, 21.9, 24.9, 29.0, 29.2, 29.3, 34.0,
43.8, 74.7, 116.4, 136.5, 170.3, 202.1. Anal. Calcd. for C16H28O3: C, 71.60; H, 10.52%.
Found: C, 71.68; H, 10.67%.
Ethyl (S)-14-Acetoxyhexadeca-2E,15-dienoate 45.
Wittig-Horner reaction of 44 (0.650 g, 2.42 mmol) with triethyl phosphonoacetate (0.652 g,
2.91 mmol) in THF (15 mL), using NaH (0.140 g, 2.91 mmol, 50% suspension in oil) as the
base, usual work up and column chromatography (silica gel, 0-10% Et2O/hexane) furnished
pure 45 (0.630 g, 77%). colorless oil; [α]D22
-5.4 (c 1.03, CHCl3); IR: 1739, 1722, 982 cm-1
;
1H NMR: δ 1.05-1.31 (m, 17H), 1.42-1.61 (m, 4H), 2.05 (s, 3H), 2.12-2.22 (m, 2H), 4.17 (q,
J = 7.2 Hz, 2H), 5.11-5.25 (m, 3H), 5.63-5.84 (m containing a d at δ 5.79, J = 15.8 Hz, 2H),
59
6.88-7.02 (m, 1H); 13
C NMR: δ 14.2, 21.2, 24.9, 27.9, 29.0, 29.3, 29.4, 32.0, 34.1, 60.0, 74.8,
116.4, 121.1, 136.5, 149.4, 166.7, 170.3. Anal. Calcd. for C20H34O4: C, 70.97; H, 10.12%.
Found: C, 71.16; H, 10.16%.
(2R,3S)-l,2-Cyclohexylidenedioxytridecan-3-ol 46.
Reaction of 10 (6.0 g, 35.29 mmol) with 1-decyl-Li [prepared from 1-bromodecane (15.60 g,
70.59 mmol) and Li (1.1 g, 155.29 mmol)] in THF (100 mL) at -78 oC, usual isolation and
column chromatography (silica gel, 0-15% EtOAc/hexane) furnished 46 (8.90 g, 81%).
colorless oil; [α]D22
+5.1 (c 1.14, CHCl3), (lit.48
[α]D22
+4.21 (c 0.83, CHCl3)); IR: 3418 cm-
1;
1H NMR: δ 0.86 (dist. t, J = 6.8 Hz, 3H), 1.20-1.40 (m, 20H), 1.56-1.62 (m, 8H), 1.94
(broad s, 1H), 3.63 (t, J = 6.4 Hz, 1H), 3.87-3.97 (m, 3H); 13
C NMR: δ 13.9, 22.4, 23.5, 23.7,
24.9, 25.5, 29.1, 29.4, 31.7, 32.4, 34.6, 35.9, 63.9, 70.4, 78.1, 109.2. Anal. Calcd. for
C19H36O3: C 73.03, H 11.61; Found: C 73.17, H 11.47.
(2R,3S)-3-Benzyloxy-l,2-cyclohexylidenedioxytridecane 47.
To a stirred suspension of NaH (1.44 g, 50% suspension in oil, 29.97 mmol) in THF (30 mL)
was added 46 (8.5 g, 27.24 mmol) in THF (30 mL) under Ar. After the evolution of H2
subsided, the mixture was refluxed for 1 h, brought to room temperature, and Bu4NI (10
mol%) and BnBr (5.59 g, 32.69 mmol) in THF (30 mL) added into it. The mixture was
refluxed till consumption of 46 (cf. TLC, ~4 h), brought to room temperature, and treated
with ice-cold H2O (30 mL). The organic layer was separated, the aqueous portion extracted
60
with Et2O (2 × 25 mL). The combined organic extracts were washed with H2O (2 × 10 mL)
and brine (1 × 5 mL), and dried. Solvent removal followed by column chromatography (silica
gel, 0-10% EtOAc/hexane) of the residue furnished 47 (10.19 g, 93%). colorless oil; [α]D22
+5.0 (c 1.16, CHCl3); IR: 3060, 1644 cm
-1;
1H NMR: δ 0.87 (dist. t, J = 6.4 Hz, 3H), 1.15-
1.39 (m, 20H), 1.51-1.61 (m, 8H), 3.48-3.56 (m, 1H), 3.86-3.90 (m, 1H), 3.95-4.04 (m, 2H),
4.51-4.73 (m, 2H), 7.29-7.34 (m, 5H); 13
C NMR: δ 14.1, 22.7, 23.8, 24.0, 25.0, 25.2, 29.3,
29.6, 29.7, 31.4, 31.9, 34.9, 36.2, 65.8, 72.9, 77.6, 79.0, 109.4, 127.5, 127.8, 128.3, 138.7.
Anal. Calcd. for C26H42O3: C 77.56, H 10.51; Found: C 77.71, H 10.47.
(2R,3S)-3-Benzyloxytridecane-l,2-diol 48.
A mixture of 47 (5.0 g, 12.44 mmol) and aqueous HCl (6 mL, 2N) was stirred at 25 oC till
completion of the reaction (cf. TLC, 6 h). Most of the solvent was removed in vacuo, the
residue diluted with H2O (30 mL) and extracted with EtOAc (3 × 20 mL). The combined
organic extracts were washed successively with H2O (3 × 10 mL), 10% aqueous NaHCO3 (2
× 10 mL), H2O (2 × 10 mL) and brine (1 × 5 mL), and dried. Solvent removal followed by
column chromatography (silica gel, 0-5% MeOH/CHCl3) of the residue gave pure 48 (3.0 g,
75%). colorless oil; [α]D22
+7.3 (c 1.12, CHCl3), (lit.49
[α]D +6.4 (c 1.07, CH2Cl2)); IR: 3398,
1620, 1063 cm-1
; 1H NMR δ 0.87 (dist. t, J = 6.8 Hz, 3H), 1.21-1.59 (m, 18H), 2.72 (broad s,
2H), 3.56-3.69 (m, 1H), 3.72-3.78 (m, 3H), 4.51-4.65 (m, 2H), 7.27-7.36 (m, 5H);
13C NMR:
δ 14.0, 22.6, 25.2, 29.5, 29.7, 30.3, 31.8, 63.3, 72.5, 72.7, 80.8, 127.7, 127.8, 128.3, 138.1.
Anal. Calcd. for C20H34O3: C 74.49, H 10.63; Found: C 74.35, H 10.80.
61
(2S,3S)-3-Benzyloxy-l,2-epoxytridecane 49.
To a cooled (-20 oC) and stirred solution of 48 (1.16 g, 3.60 mmol) and Et3N (1.76 mL, 12.6
mmol) in EtOAc (12 mL) was added TMSCl (0.46 mL, 3.6 mmol). After stirring for 20 min,
Et3N (0.8 mL, 5.76 mmol) and MsCl (0.334 mL, 4.32 mmol) were successively added into
the mixture. After stirring for another 30 min, the mixture was brought to 25 oC, aqueous 2N
aqueous HCl (7.0 mL) was added and stirring continued for 1 h. The organic layer was
separated, the aqueous portion extracted with EtOAc (2 × 15 mL) and the combined organic
extracts were washed successively with H2O (3 × 10 mL), aqueous 2N HCl (2 × 10 mL), H2O
(2 × 10 mL) and brine (1 × 5 mL), and dried. Solvent removal afforded the corresponding 1-
hydroxy-2-mesylate. IR: 1456, 1350 cm-1
.
A mixture of the above compound (1.14 g, 2.83 mmol) and anhydrous K2CO3 (1.17 g,
8.48 mmol) in MeOH (20 mL) was stirred for 3 h at room temperature. The supernatant was
decanted, the solid residue washed with EtOAc (20 mL) and the combined organic extracts
concentrated in vacuo. The residue was taken in EtOAc (30 mL) washed with H2O (3 × 15
mL) and brine (1 × 5 mL), dried and concentrated in vacuo. Column chromatography (silica
gel, 0-5% EtOAc/hexane) of the residue gave pure 49 (0.722 g, 84%). colorless oil; [α]D22
-22.5 (c 1.28, CHCl3), (lit.49
[α]D -17 (c 1.16, CH2Cl2) for (2R,3S)-49); IR: 1254, 850 cm-1
;
1H NMR: δ 0.87 (dist. t, J = 6.8 Hz, 3H), 1.26 (broad s, 18H ), 2.48-2.52 (dd, t, J = 1.8 Hz,
3.0 Hz, 1H), 2.79 (t, J = 3.0 Hz, 1H), 2.99-3.06 (m, 2H), 4.58 (d, J = 11.7 Hz, 1H), 4.84 (d, J
= 11.7 Hz, 1H), 7.26-7.40 (m, 5H); 13
C NMR: δ 14.1, 22.7, 25.5, 29.3, 29.5, 29.6, 31.9,
32.3, 43.1, 55.1, 71.6, 80.5, 127.4, 127.8, 128.3, 138.7. Anal. Calcd. for C20H32O2: C 78.90,
H 10.59; Found: C 78.75, H 10.43.
62
(3S,4S)-4-Benzyloxytetradec-1-en-3-ol 50.
As described earlier, compound 49 (0.470 g, 1.55 mmol) was reacted with the sulphorane
[prepared from Me3SI (1.57 g, 7.73 mmol) and n-BuLi (4.31 mL, 1.5 M in hexane, 6.46
mmol) at -40 oC in THF (25 mL), and the product 50 (0.393 g, 80%) was isolated by work-up
and column chromatography (silica gel, 0-15% EtOAc/hexane). colorless oil; [α]D22
+3.1 (c
0.980, CHCl3); IR: 3444, 992, 922 cm-1
; 1
H NMR: δ 0.89 (dist. t, J = 6.4 Hz, 3H), 1.27
(broad, s, 16H), 1.57-1.63 (m, 2H), 2.55 (broad s, 1H), 3.32-3.39 (m, 1H), 4.08-4.17 (m, 1H),
4.55 (d, J = 11.4 Hz, 1H), 4.65 (d, J = 11.4 Hz, 1H), 5.21-5.41 (m, 2H), 5.84-5.95 (m, 1H),
7.34-7.38 (m, 5H); 13
C NMR: δ 14.1, 22.7, 25.1, 29.4, 29.6, 29.7, 29.9, 30.4, 31.9, 72.6,
74.4, 82.3, 116.8, 127.8, 127.9, 128.5, 137.7. Anal. Calcd. for C21H34O2: C 79.19, H 10.76;
Found: C 79.05, H 10.59.
Ethyl (14S,17S,18S)-14-Acetoxy-17-hydroxy-18-benzyloxyoctacosa-2E,15E/Z-dienoate
51.
A mixture of 45 (0.130 g, 0.38 mmol), 50 (0.180 g, 0.56 mmol) and Grubbs' II catalyst (4
mol%) in CH2Cl2 (15 mL) was stirred for 22 h. After concentrating the mixture in vacuo, the
residue was subjected to column chromatography (silica gel, 0-15% EtOAc/hexane) to give
pure 51 (0.146 g, 61% based on conversion of 50). colorless oil; [α]D22
-9.3 (c 1.03, CHCl3);
IR: 3461, 1735, 1722, 972 cm-1
; 1
H NMR: δ 0.85 (dist. t, J = 6.2 Hz, 3H), 1.24-1.58 (m
containing a s at δ 1.30, 39H), 2.03 (s, 3H), 2.15-2.24 (m, 3H), 3.27-3.35 (m, 1H), 4.07-4.28
(m, 4H), 4.47-4.65 (m, 2H), 5.22-5.25 (m, 1H), 5.70-5.83 (m, 2H), 6.98 (d, J = 16.2 Hz, 1H),
7.35-7.39 (m, 5H); 13
C NMR: δ 14.0, 21.2, 22.6, 24.9, 25.0, 27.9, 29.0, 29.3, 29.4, 29.5, 29.8,
63
30.3, 31.8, 32.1, 34.3, 60.0, 72.4, 73.2, 74.1, 82.3, 121.1, 127.7, 128.3, 130.5, 132.3, 138.1,
149.4, 166.7, 170.2. Anal. Calcd. for C39H64O6: C 74.48, H 10.26; Found: C 74.72, H 10.45.
Ethyl (14S,17S,18S)-14-Acetoxy-17,18-dihydroxyoctacosanoate 52.
Catalytic hydrogenation of 51 (0.125 g, 0.20 mmol) over 10% Pd-C (0.05 g) in EtOH (10
mL), work-up and column chromatography (silica gel, 0-15% EtOAc/hexane) furnished pure
52 (0.095 g, 88%). colourless oil; [α]D22
+13.2 (c 1.14, CHCl3); IR: 3457, 1740, 1730 cm-1
;
1H NMR: δ 0.86 (dist. t, J = 6.4 Hz, 3H), 1.23-1.60 (containing a s at δ 1.32, 47H), 2.03 (s,
3H), 2.26 (t, J = 7.2 Hz, 2H), 2.69 (broad s, 2H), 3.47-3.58 (m, 2H), 4.08 (q, J = 7.0 Hz,
2H), 4.28-4.36 (m, 1H); 13
C NMR: δ 14.1, 14.2, 21.3, 22.7, 25.0, 25.6, 26.0, 29.1, 29.2, 29.3,
29.6, 30.5, 31.9, 33.6, 34.1, 60.2, 74.3, 74.5, 74.7, 171.3, 174.0. Anal. Calcd. for C32H62O6: C
70.80, H 11.51; Found: C 70.54, H 11.72.
Ethyl (14S,17S,18S)-14,17,18-Trihydroxyoctacosanoate 53.
A mixture of 52 (0.09 g, 0.17 mmol) and Amberlyst 15®
(0.05 g) in EtOH (5 mL) was
magnetically stirred at 25 oC for 18 h. After filtering the mixture, it was concentrated in
vacuo, and the residue subjected to preparative chromatography (silica gel, 15%
EtOAc/hexane) to obtain pure 53 (0.077 g, 91%). colourless oil; [α]D22
-11.7 (c 0.912,
CHCl3); IR: 3446, 1742 cm-1
; 1
H NMR: δ 0.87 (dist. t, J = 6.4 Hz, 3H), 1.27-1.56 (containing
a s at δ 1.30, 47H), 2.32 (t, J = 6.8 Hz, 2H), 2.44 (broad s, 2H), 2.82 (broad s, 1H), 3.44-3.65
(m, 3H), 4.10 (q, J = 7.2 Hz, 2H); 13
C NMR: δ 14.2, 21.2, 22.5, 25.0, 25.3, 25.5, 27.3, 27.7,
29.2, 29.3, 29.8, 30.2, 31.2, 31.9, 32.1, 34.4, 60.7, 72.4, 74.4, 74.7, 169.2. Anal. Calcd. for
C30H60O5: C 71.95, H 12.08; Found: C 70.54, H 11.72.
CHAPTER IIICHAPTER IIICHAPTER IIICHAPTER III
“Chemoenzymatic Syntheses “Chemoenzymatic Syntheses “Chemoenzymatic Syntheses “Chemoenzymatic Syntheses
of Two Macrolides”of Two Macrolides”of Two Macrolides”of Two Macrolides”
64
III.1 ENANTIOMERIC SYNTHESES OF THE MACROLIDE ANTIBIOTIC (-)-A26771B
III.1.1 Introduction
The macrolides are of wide occurrence in various natural sources and several of these
show impressive medicinal and other biological activities.24
The antimicrobial spectrum of
macrolides is wider than that of penicillin, making them attractive substitutes for patients with a
penicillin allergy. Several highly oxygenated, conformationally restricted marine macrolides
possess outstanding cell growth antiproliferative properties, and some of these are under
preclinical and/or clinical trials.51
The 16-membered macrolide, (-)-A26771B (V), isolated from
the fungus Penicillium turbatum showed moderate activity against the gram-positive bacteria,
mycoplasma, and fungi.52
Its macrolide skeleton also contains an additional keto moiety that may
broaden the antimicrobial spectrum. All these have generated tremendous interest among organic
chemists leading to several racemic53
and enantioselective syntheses of V.54
III.1.2: Previous Syntheses
The first enantiomeric synthesis of V employed D-glucose and a chromatographic
separation to instill the 5S- and 15R-stereochemistry respectively.54a
The required 15R
stereocentre of V has been generated using (R)-(+)-methyloxirane in several other syntheses.54b-e
In an innovative approach, both the stereogenic centres of V were introduced in a single
Sharpless asymmetric dihydroxylation (ADH) step,54f
while the ADH reaction in combination
with a lipase-catalyzed trans-acylation were the key steps in its another synthesis.54g
Sharpless’
kinetic resolution54c,d
or ADH reaction54e
of 2-furylcarbinols were used to obtain the required 5S-
carbinol as well as the γ-keto-E-α,β-unsaturated carboxylic acid moieties of V. However, many
of the reported syntheses of V were targeted to the lactone Va, or followed the known
65
procedure54a
of converting Va to V (Figure III.1.1.). Some of the previous syntheses are briefly
described below.
In one of these (Scheme III.1.1.),54f
the conjugated ester 54 was subjected to Sharpless
ADH reaction with AD-mix-α reagent to obtain the tetrol 55. This was converted to 56 by
acetonide protection of the two α-glycol moieties, selective removal of the terminal acetonide
function, bromination of the primary hydroxyl function with acetyl bromide and reductive
debromination. Alkaline hydrolysis of its ester functions and Yamaguchi lactonization
(C6H2Cl3COCl/Et3N/DMAP) gave Va, which was deacetalized and the released carbinol
succinoylated to obtain V.
In another synthesis (Scheme III.1.2.),54c
the bromo alcohol 57 was oxidized to the
corresponding aldehyde by Swern oxidation, reacted with 2-furyl lithium and subsequently
66
subjected to a kinetic resolution using Sharpless epoxidation to obtain 58. After protecting its
alcohol function, its Grignard reagent was reacted with (R)-epichlorohydrin to get the
chorohydrin 59. Reductive removal of its chlorine atom and oxidative cleavage of the furan ring
gave the acid 60. This was converted to V by Yamaguchi lactonization followed by some routine
sequence of reactions, used in Scheme III.1.1.
In a more recent synthesis (Scheme III.1.3.),54e
the alcohol 62 was obtained by reacting
(R)-epichlorohydrin with the Grignard reagent, prepared from 61. Its cross-metathesis with 63
gave compound 64, which on a Sharpless ADH reaction with AD-mix-α reagent, acetonide
protection and heating furnished the keto macrolide 65. This was transformed to Va by reduction
of the ketone function, mesylation of the resultant alcohol and a base-catalyzed elimination.
Conversion of Va to V was achieved, as described previously.
67
68
III.1.3. PRESENT WORK
Compound V contains a methylcarbinol moiety, CH3CH(OH) that often contributes to the
chirality of many biochemicals and pharmaceuticals.55
Usually this moiety is obtained using the
"chiral pool" compounds such as lactic acid or alanine. However, this approach provides only the
(S)-methylcarbinols, while its antipode is accessible only via circuitous routes. The biocatalytic
reactions are now a viable option to develop low-waste asymmetric syntheses of
pharmaceuticals, chiral intermediates, and complex target molecules.56
The whole cell
microorganisms such as bakers’ yeast,19a,b
Rhizopus arrhizus,57a-c
Geotrichum candidum57d,e
etc.
have been effectively used for the asymmetric reduction of methyl ketones to the corresponding
chiral methylcarbinols. Nevertheless, microbial reduction often proceeds with low
enantioselectivity, and usually follows Prelog’s rule to furnish only the (S)-methylcarbinols. Use
of commercially available alcohol dehydrogenases32f
for asymmetric reduction of ketones is
restricted due to the prohibitive cost of the enzymes and the cofactors. From this perspective, the
lipase-catalyzed kinetic resolution of alcohols is more promising, as it provides the carbinol
enantiomers, and if required, the efficiency of the resolution-based protocol can be improved by
invoking dynamic kinetic resolution58a,b
or stereo-inversion under the Mitsunobu conditions.58c-e
Lipases are commercially available, affordable, display good stereoselectivity, work in organic
or aqueous media, and are easily handled by organic chemists.59
The chemoenzymatic
approaches involving lipase-catalyzed asymmetric reactions have been extensively used by our
group to synthesize a diverse array of target compounds including the macrolides.29d,e
Presently,
a new enantioselective synthesis of the macrolide core Va of the antibiotic was developed using
two lipase-catalyzed acylation reactions as the key steps for incorporating the stereogenic
centres. This protocol was further extended to develop an operationally simple synthesis of (-)-V.
69
The synthetic plan of V was conceived in consideration of the efficacy of the inexpensive
and robust lipase preparation, Novozym 435®
in resolving methylcarbinols,29i
and allylic
alcohols.49
While the importance of the resolution of methylcarbinols is obvious, the chiral allylic
alcohol moiety with a terminal alkene function was useful in constructing the macrolide structure
via an RCM reaction.37
The synthesis (Scheme III.1.4.) commenced from 11-bromo-1-undecene
(66), which was converted to the corresponding Grignard reagent and subsequently reacted with
acetaldehyde to furnish the alcohol (±)-67. The 1H NMR 3H-doublets at δ 1.17, and 1H-
mutiplets at δ 3.73-3.82, and the 13
C NMR peak at δ 67.7 confirmed its CH3CH(OH)- moiety.
This was subjected to a trans-acetylation with vinyl acetate in hexane or diisopropyl ether in the
presence of different commercial lipase preparations (porcine pancreatic lipase (PPL), Candida
rugosa lipase (CRL), an immobilized-CRL (Sigma-Aldrich, 80841), and Novozym 435®). The
results are shown in Table III.1.1. PPL and the immobilized-CRL were ineffective in both the
solvents, while the CRL-catalyzed acetylation proceeded in diisopropyl ether, but without any
enantioselectivity. The Novozym 435®-catalyzed acetylation of (±)-67 in diisopropyl ether
furnished the acetate (R)-68 (97% ee, E = 126) (IR band at 1738 cm-1
and 1H and
13C NMR
resonances at δ 2.01 and at δ 169.9 respectively) and (S)-67 (84% ee) after 40% conversion (cf.
GC, 75 min). When the reaction was allowed to proceed up to 51% conversion (cf. GC, 2 h), (S)-
67 was obtained in 96% ee. Alternatively, the resolved alcohol (S)-67 (obtained at 40%
conversion) was enantiomerically enriched to 98% ee by a second Novozym 435®-catalyzed
acetylation (15% conversion) as above. The reaction was repeated several times at various scales
with reproducible results.
70
Table III.1.1. Resolution of (±)-67 with different lipasesa
Entry Lipase Solvent Time %
Conversion
% ee of
67
% ee of
68
1 PPL hexane 48 h <10
-- --
2 PPL diisopropyl ether 48 h <10
-- --
3 immobilized-
CRL
hexane 48 h Nil
-- --
4 immobilized-
CRL
diisopropyl ether 48 h Nil
-- --
5 CRL diisopropyl ether 48 h 25b
-- --
6 Novozym 435® diisopropyl ether 75 min 40 84 97
7 Novozym 435® diisopropyl ether 2 h 51 96 92
8 Novozym 435® diisopropyl ether 8-10 h 15 98b
--
aThe experiments were carried out using (±)-67 (2 mmol) and vinyl acetate (3 mmol) at 25
oC.
bIn this case, (R)-67, obtained from entry 6 was used.
Alkaline hydrolysis of the acetate (R)-68 with K2CO3/aqueous MeOH furnished the
alcohol (R)-67 (IR band at 3349 cm-1
; absence of the NMR resonances for the acetate group).
The % ees of the enantiomeric alcohols (R)- and (S)-67 were determined from the relative
intensities of the methoxyl resonances of the corresponding (R)-MTPA esters.14b
The
configurations of the alcohols were assigned by converting a small aliquot of the respective
alkenol enantiomers into tridecan-2-ol enantiomers and comparing their optical rotations with the
reported values.60
As per the requirement of the synthesis and to make the synthesis
enantioconvergent, (S)-67 was converted to its enantiomer (R)-67 under the Mitsunobu
71
conditions (Ph3P/DIAD/p-nitrobenzoic acid/THF/8 h; K2CO3/MeOH/25 oC/3 h, 91-95%).
57c The
alcohol (R)-67 was silylated with TBDPSCl/imidazole/DMAP to furnish (R)-69. Its 1H NMR
signals at δ 1.07, δ 7.38-7.48 and δ 7.66-7.74 as well as the 13
C NMR peaks in the aromatic
region were as per expectation. Dihydroxylation of the alkene function in compound 69 with
OsO4/N-methylmorpholine N-oxide (NMO) gave the diol 70. Its 1H NMR resonances at δ 3.65-
3.88 (m, 3H) and 13
C peaks at δ 66.8, δ 69.6 and δ 72.3 in place of the alkene NMR resonances
confirmed its formation. Cleavage of its α-glycol function with NaIO4 gave the aldehyde (R)-71
(IR: 2712 and 1727 cm-1
; NMR: δH 9.80 (t, 1H) and δC 179.6). This on reaction with
vinylmagnesium bromide gave the alcohol 72 as a mixture of C-3 epimers. Expectedly, its 1H
NMR showed terminal olefinic mutiplets at δ 5.07-5.25 (2H) and 5.76-5.96 (1H).
Next, the alcohol 72 was subjected to another Novozym 435®
-catalyzed acetylation with
vinyl acetate in diisopropyl ether to produce the acetate 73 (95% ee, E = 145) and (3R,13R)-72
(98% ee) after 50% conversion (cf. GC, 6 h). The stereochemical outcome of the
transesterification was consistent with our previous results,29h,i,49
and followed Kazlauskas’
empirical rule.61
For determination of the % ees of the products, the acetate 73 was subjected to
alkaline hydrolysis to obtain (3S)-72. Subsequently, both (3S)- and (3R)-72 were converted to
their respective (R)-MTPA esters and analyzed by 1H NMR spectra as above. Next, in order to
increase the yield of the synthesis, the alcohol (3R,13R)-72 was converted to the required alcohol
(3S,13R)-72 by a Mitsunobu inversion. Its 1H and
13C NMR spectra are shown in Figures
III.1.2. and III.1.3.
The carbinol function in (3S,13R)-72 was protected with 3,4-dihydropyran (DHP) in the
presence of pyridinium p-toluenesulphonate (PPTS) in CH2Cl2 to furnish 74. Its one proton 1H
NMR multiplets at δ 4.63-4.68 and 13
C peaks at δ 95.0 and 97.7 (epimeric acetal carbon)
72
Figure III.1.2. 1H NMR spectrum of (3S,13R)-72.
Figure III.1.3. 13
C NMR spectrum of (3S,13R)-72.
73
revealed the –OTHP function. As above, dihydroxylation of the alkene 74 gave 75, which
on reaction with NaIO4 furnished the aldehyde 76. This was converted to the allylic alcohol 77
by reaction of with vinylmagnesium bromide. The compounds 75-77 were characterized by their
NMR spectra that showed expected changes, discussed earlier. However, due to the presence of
additional stereogenic centres (carbinol and/ or OTHP) in them, the NMR spectra of 75-77
showed more peaks. Since the C-3 carbinol function of 77 would be eventually converted to the
keto group in the target compound, the synthesis was continued using the C-3 epimeric mixtures
of 77. Thus, it was depyranylated with MeOH/PPTS and the resultant diol reacted with 2,2-
dimethoxypropane (2,2-DMP) in the presence of PPTS to furnish the acetonide 78. The
acetonide Me protons appeared at δ 1.37 and δ 1.42 in the 1H NMR spectrum, while the
quaternary carbon was seen at δ 108.0 and 108.5 in the 13
C NMR spectrum, consistent with its
epimeric nature. This was desilylated with Bu4NF in THF to furnish the alcohol 79 (absence of
TBDPS NMR signals). This on reaction with ethyl acrylate in the presence of Novozym 435®
as
the catalyst afforded the acrylate ester 80. Besides the IR ester band at 1723 cm-1
, its 1H NMR
resonances at δ > 5.1 and 13
C NMR peak at δ 165.9 confirmed its structure. Finally, an RCM
reaction of 80 in the presence of Grubbs’ II catalyst in refluxing CH2Cl2 furnished the desired
macrolide Va in good (81%) yield. The spectral data (1H and
13C NMR spectra shown in Figures
III.1.4. and III.1.5.) of the synthesized Va were in conformity with its structure and
corresponded well with the reported values.52
In particular, the 1H the NMR resonances at δ 6.00
(d) and δ 6.83 (dd) with J = 15.6 Hz also confirmed the E geometry of the olefin.
74
Figure III.1.4. 1H NMR spectrum of Va.
Figure III.1.5. 13
C NMR spectrum Va.
75
(R)-68
(S)-67 + (R)-67
(R)-69
i) Mg/THF/25 oC/CH3CHO/3 h, ii) Vinyl acetate/ diisopropyl ether/Novozym 435®/25oC/75 min (for (+)-67);
6 h (for (3RS,13R)-72), iii) K2CO3/aqueous MeOH/25oC/6 h, iv) DIAD/Ph3P/p-NO2C6H4CO2H/THF/8 h;
K2CO3/aqueous MeOH, v) TBDPSCl/imidazole/4-DMAP/CH2Cl2/0 to 25oC/7 h, vi) OsO4/NMO/acetone-H2O
(8:1)/t-BuOH/25 oC/10 h, vii) NaIO4/MeCN-H2O/0oC/2 h, viii) CH2=CHMgBr/THF/-78
oC/1 h, ix) DHP/PPTS
/CH2Cl2/25oC/4 h, x) PPTS/MeOH/25 oC/6 h; 2,2-DMP/PPTS/25 oC/12 h, xi) Bu4NF/THF/0
oC/4 h, xii)
CH2=CHCO2Et/ Novozym 435®/25oC/24 h, xiii) Grubbs' II catalyst/CH2Cl2/ /8 h.
ii(CH2)9
OH
(CH2)9
OAc
(CH2)9
OTBDPS
Scheme III.1.4.
(2RS,12R)-70
(CH2)9
OTBDPS
OH
OH
iii
(CH2)9
OTBDPS
CHO
iv,
(3RS,13R)-72
(CH2)9
OTBDPS OH
(3R)-72 +
73
(CH2)9
OTBDPS OAc
(CH2)9
OTBDPS OH
(3S,13R)-72
vi
(CH2)9
OTBDPS OTHP
74
(CH2)9
OTBDPS OTHP
75
OHOH
(CH2)9
OTBDPS
CHO
OTHP
76
x
(CH2)9
OTBDPS OTHP
77OH
(CH2)9
OTBDPS O
O
(CH2)9
O O
80O
v
i
(+)-67
iv, 95%
ix
xi
xiii
O
Va
66
vii
iiiii
vi
90% 40% ~quant.
93% 95% 91%
88% 98% 90%
87% 91% 91%
93% 81%
(CH2)9Br
viii
vii
conversion
~quant.50%conversion
91%
(R)-67
(3S,13R)-72
viii
90%
(R)-71
78
xii
(CH2)9
OH O
O79
Synthesis of the macrolide V from Va requires hydrolysis of the acetonide function,
followed by the regioselective installation of a succinic acid moiety onto the C-5 carbinol
function and oxidation of the C-4 carbinol moiety. Previous attempts for selective oxidation of
the unnecessary C-4-hydroxyl group in the presence of those at the C-5 and C-15 positions were
76
unsuccessful. The earlier syntheses of macrolide V from Va was achieved using multiple
steps.54a-c
In view of these, presently, the Scheme III.1.4 was slightly modified to formulate an
improved total synthesis of V. For this (Scheme III.1.5), the alcohol 77 was desilylated with
Bu4NF in THF to obtain the diol 81. Its Novozym 435-catalyzed reaction with ethyl acrylate
proceeded regioselectively at the methylcarbinol centre, without affecting the allylic carbinol
function to furnish 82. The IR and NMR spectra of 82 were similar to that of 80 and showed
features, typical of its constituent acrylate functionality.
The lipase-catalyzed acrylation has been extensively studied, owing to its potential
application in chemical industries.62
Till date there is only one report of using it for the kinetic
resolution of alcohols.63
However, this was achieved with the activated ester, vinyl acrylate that
needed to be synthesized separately. Instead, we achieved the acrylation using commercially
available ethyl acrylate. Despite being a slow reaction, we found several advantages in the
enzymatic acrylation, compared to the conventional base-catalyzed reaction with acryloyl
chloride. The enzymatic reaction could be carried out with 79 (vide supra) and 81 avoiding the
77
hygroscopic, hazardous and toxic acryloyl chloride. With both the compounds, the reaction
proceeded without any side reaction or formation of any colored products, and the acrylate esters
80 and 82 were conveniently isolated by filtering the reaction mixture, solvent removal and
column chromatography. In particular, the result of the Novozym 435®
-catalyzed acrylation of
81 is noteworthy. Given that Novozym 435®
is known to acylate both 2-alkanols and 3-
alkenols,29h,i
the exclusive formation of 82 suggested that the chosen lipase discriminated
between the designated carbinol functionalities. Further, the 14R-stereochemistry of the alcohols
79 and 81 also matched with the inherent enantioselectivity of the chosen lipase. Hence this
strategy may be useful in asymmetric syntheses of compounds, possessing a chiral
methylcarbinol moiety. At present we don’t have any explanation for the observed chemo-
selectivity of the reaction. Nevertheless, the results are valuable in organic synthesis, and
unprecedented to the best of our knowledge. Finally, an RCM reaction of 82 in the presence of
Grubbs’ II catalyst furnished the macrolide 83 in good (68%) yield. Appearance of two olefinic
multiplets at δ 6.04-6.18 and δ 6.82-6.95 (each, 1H) in its 1H NMR spectrum confirmed the
RCM reaction. This on oxidation with buffered PCC gave the ketone 84 (IR band at 1725 cm-1
in
place of the OH band) uneventfully. The notable changes in its NMR spectra viz. the downfield
shifts of the olefinic resonances to δH 6.78 (d, J = 15.8 Hz, 1H) and δH 7.28 (d, J = 15.8 Hz, 1H),
and δC 199.7 were consistent with the introduction of the keto group, α-to the alkene
functionality. Depyranylation of 84 with aqueous TFA, followed by a base-catalyzed
succinoylation produced the target compound V. The spectral data (1H and
13C NMR spectra
shown in Figures III.1.6. and III.1.7..) of the synthesized V were in conformity with its
structure and corresponded well with the reported values.64
78
Figure III.1.6. 1H NMR spectrum of V.
Figure III.1.7. 13
C NMR spectrum V.
79
Overall, a formal and a total synthesis of the macrolide antibiotic (-)-A26771B have been
developed using a chemoenzymatic approach. The required stereogenic centres of the target
molecules were instilled using the green biocatalytic reactions as the key steps. We also used
Mitsunobu inversion after the lipase-catalyzed acylation steps to offset the limitation of a
resolution-based synthesis by making it enantio-convergent. This improved the yield of the
synthesis. Since our methodology gives access to all possible stereoisomers of the key
intermediate 72, it would be possible to access all the stereomers of the macrolide based on the
described methodology. This strategy also provided easy access to the enantiomers of chiral
methylcarbinol CH3CH(OH) and secondary allylic alcohol moieties that are very useful for the
syntheses of many bioactive compounds. Further, the unprecedented Novozym 435®-catalyzed
protocol for the chemo-selective acrylation using a non-traditional acyl donor (ethyl acrylate) is
particularly noteworthy and elevates the significance of the work. This strategy may be useful in
kinetic resolution of chiral CH3CH(OH) moiety to furnish the corresponding acrylates for their
subsequent conversion to a diverse array of natural products. Use of inexpensive
reagents/materials, and application of operationally simple reactions were the other attractive
features of the flexible, efficient and scalable syntheses.
Alternate Synthesis of V. Most of the previous syntheses of V including the present one,
discussed above involve introduction of the unnecessary C(4)-hydroxyl group followed by its
conversion to the keto group. This is achieved by differentiation of the C(4)-carbinol centre from
the other hydroxyl groups, necessitating the use of different orthogonal carbinol
protecting/deprotecting strategies. Hence an alternative, short synthesis of V (Scheme III.1.6)
was also developed.
80
In this case, we used the alcohol (S)-67, which on silylation with
TBDPSCl/imidazole/DMAP furnished (S)-69. Its NMR spectral features were similar to that of
its enantiomer and consistent with its chemical structure. Cleavage of its alkene function by
ozonolysis (O3/Ph3P) gave the aldehyde (S)-71 [IR: 2710 and 1717 cm-1
; NMR: δH 9.76 (t, J =
1.8 Hz, 1H) and δC 202.5]. Next, the aldehyde (S)-71 was reacted with allyl(Bu)3Sn in the
presence of InCl3 and activated 4Å molecular sieves using (R)-BINOL65
as the chiral auxiliary in
CH2Cl2 to obtain the alcohol 85 as a single diastereomer. The 1H NMR resonances (
1H and
13C
NMR spectra shown in Figures III.1.8. and III.1.9.) at δ 2.16-2.27 (m, 2H), and at δ 5.09-5.16
(m, 2H) and δ 5.76-5.96 (m, 1H) accounted for the allyl group in 85. Its carbinol function
was protected as the tetrahydropyranyl ether 86 with DHP/PPTS in CH2Cl2 (NMR: δH 4.64-4.70
(m, 1H), δC 96.7 and 97.9). This was desilylated with Bu4NF in THF to furnish the alcohol 87,
which was subsequently esterified with acrylic acid under the Mitsunobu conditions to obtain the
acrylate 88 (NMR: δH 6.37 (dd, J = 1.7, 17.2 Hz, 1H, one of the terminal conjugated olefinic
protons), δC 166.1). An RCM reaction37
of 88 in the presence of Grubbs’ II catalyst in refluxing
CH2Cl2 furnished the desired macrolide 89 in good (75%) yield. One of the olefinic resonances
of 89 appeared at δ 5.84 (broad d, J = 15.6 Hz, 1H), accounting for the E-geometry of the olefin
function installed by the RCM reaction. Following a reported method,66
compound 89 was
subjected to a SeO2-catalyzed allylic oxidation to obtain the intermediate γ-oxo compound 84,
which on aqueous TFA-mediated depyranylation, followed by a base-catalyzed succinoylation
produced the target compound V.
81
Figure III.1.8. 1H spectrum of 85
Figure III.1.9. 13
C NMR spectrum of 85.
82
83
III.2. DIVERSITY-ORIENTED SYNTHESIS OF PYRENOPHOROL ENANTIOMERS
III.2.1. Introduction
With the rapid advancements in biological and material sciences, the organic chemists are
facing the challenge of synthesizing collections of molecules, instead of a single molecule. This
is because the structural/stereochemical complexity and diversity of the molecules govern their
function. This has led to a paradigm shift in organic chemistry research from the target-oriented
syntheses to diversity-oriented syntheses (DOS), which represents an approach towards small-
molecule library synthesis that seeks to incorporate a high degree of structural diversity
efficiently.67
Generation of high levels of stereochemical and skeletal diversity is especially
challenging. Increasing the size and number of rigidifying elements (macrocycles, polycycles,
olefins, etc.) in small molecules is essential for these compounds to bind to sites of protein-
protein interactions. The generation of structurally diverse compounds is equally important, as
the eventual target of a compound in phenotypic screens can be any one of the cell’s or
organism’s entire collection of proteins. Indeed, numerous modulators of challenging biological
targets have been identified from DOS-derived compound collections.68
For achieving skeletal
diversity, Schreiber proposed the branching reaction pathways, in which a single molecular
skeleton is exposed to different reaction conditions to effect unique rearrangements into
alternative skeletons. However, a reagent-based stereocontrol is crucial in order to achieve
stereochemical diversity, since each substrate might react with a different diastereoselectivity to
an achiral reagent leading to variable stereochemical outcomes.
Designing flexible and stereo-divergent protocols, leading to several targets from a single
starting molecule has vital significance in organic synthesis. Small chiral intermediates with high
functional density and multiple stereogenic centres are especially attractive to synthesize targets
84
of structural and stereochemical diversities. This warrants identification of such a core
intermediate that can be efficiently derivatized into various complex target compounds of
interest. Based on a literature search on the macrolides, we identified several bioactive
compounds VI-XI (Figure III.2.1.) that contain the hept-6-ene-2,5-diol derivatives C (different
stereomers and Pgs) as the common structural motif. This structural feature offered a remarkable
opportunity to formulate a divergent strategy for the synthesis of a wide array of complex target
molecules starting from the diol derivatives C as the ideal small-molecule chiral DOS-
intermediates. As explained before, use of biocatalysts, in particular, the lipases have enriched
organic synthesis immensely. Hence, in the present work, we have formulated a highly efficient
biocatalytic route to all the four stereomers of C (Pg = TBDPS) as well as two stereomers of
another derivative (Pg = PMB), and used some of these DOS-intermediates to devise asymmetric
syntheses of the natural macrodiolide (-)-pyrenophorol (VI) as well as its enantiomer. Compound
VI was isolated from Byssochlamys nivea,69a
Pyrenophora avenae,69b
and Stemphylium
radicinum69c
cultures as well as from the imperfect fungus Alternaria alternate.69d
It is
specifically phytotoxic to the host Avena sterilis (wild oat), but not to other related plant
species,70a
and also inhibited the growth of Microbotryum violaceum, Chlorella fusca,
Escherichia coli and Bacillus megaterium.70b,c
In addition, it is a promising nootropic and
antidepressant agent.70d,e
The compound possesses interesting structural features like
stereochemically pure carbinol appendages and/ or properly placed olefinic moieties of well-
defined geometries. These, coupled with its biological activity make it an attractive and
challenging synthetic target.
85
III.2.2. Previous Syntheses
Several enantiomeric syntheses of VI have been reported,71
which are briefly discussed in
this section. Using a novel asymmetric catalytic alkynylation of acetaldehyde as the key step, a
concise synthesis of the tetrahydro analogue of VI has been recently developed.72
A few of these
syntheses are described in the following. In one of the earlier synthesis of (+)-VI (Scheme
III.2.1.),71c
the bromoacetal 91 (derived from (S)-ethyl lactate 90) was converted to the
phosphonium salt 92 and the aldehyde 93 respectively, via two parallel sequences of
conventional reactions. A Wittig reaction between these compounds gave the bromo acetal 94,
which on acidic hydrolysis furnished the aldehyde 95. Its transformation to the corresponding
Wittig salt 96 followed by an intramolecular Wittig reaction furnished the macrolide 97. This
was converted to (+)-VI by an acid-catalyzed deprotection.
86
O
O
Br
CH(OEt)2
Op-anisyl
O
O
PPH3+Br-
CH(OEt)2
Op-anisyl
O
O
Br
CHO
Op-anisyl
O
O
OBr
O
Op-anisyl
CH(OEt)2
Op-anisyl
O
O
OBr
O
Op-anisyl
Op-anisyl
CHO
O
O
OPPh3
+Br-O
Op-anisyl
Op-anisyl
CHO
O O
Op-anisyl
Op-anisyl
O
O
O O
OH
OH
O
O
91
i) PPh3/CH3CN, ii) HCO2H, iii) TEA/CH3CN/heat, iv) CAN/CH3CN-H2O/-10oC.
92
93
94
i
ii
iii
ii
95
i
96
iii
97
iv
(+)-VI
Scheme III.2.1.
90
In an asymmetric synthesis of (-)-VI (Scheme III.2.2.),71d
the diol 98 was
monobenzylated and converted to the alkenol derivative 99 by iodination of the hydroxyl
function and a base-catalyzed elimination. Its epoxidation followed by a hydrolytic kinetic
resolution furnished the chiral epoxide 100, which on LiAlH4 reduction, silylation and catalytic
hydrogenation gave 101. This on Swern oxidation, MacMillan α-hydroxylation, Horner–
Wadsworth–Emmons reaction and tetrahydropyranylation gave the ester 102. This was
converted to the acid 103 by conventional alkaline hydrolysis and desilylation. Its Mitsunobu
cyclization and depyranylation furnished (-)-VI.
87
In another synthesis of (-)-VI (Scheme III.2.3.),71e
the chiral pool-derived material,
methyl α-D-glucopyranoside (105) was transformed to the epoxide 106 by mono-tosylation and
base treatment. Regioselective reduction of its oxirane group and benzylation gave 107. This on
acid-catalyzed deacetalization followed by a two-carbon homologation via the Wittig route
afforded the conjugated ester 108, which after alkaline hydrolysis to 109 and Yamaguchi
lactonization gave 110. This was converted to the target compound by debenzylation.
88
More recently, (S)-ethyl lactate (90) was used for the synthesis of (-)-VI (Scheme
III.2.4.).71f
Thus, compound 90 was silylated, reduced with DIBAL-H, two-carbon homologated
by a Wittig reaction and hydrogenated to obtain 111.
This was converted to the allylic alcohol 112 using a similar sequence of reactions involving
DIBAL-H reduction and Wittig olefination. Its Sharpless epoxidation to 113 followed by
iodination of the alcohol group and reductive elimination afforded the secondary allylic alcohol
114. This on a cross-metathesis with ethyl acrylate, tetrahydropyranylation and alkaline
89
hydrolysis gave the acid 115. The rest of the synthesis followed a similar route as described
earlier.
In the latest synthesis (Scheme III.2.5.),71g
the (R)-oxirane 116 was reacted with the allyl
Grignard reagent and the resultant alcohol silylated to obtain 117. Its ozonolysis, Wittig reaction,
DIBAL-H reduction and Sharpless epoxidation with (-)-DIPT/cumene hydroperoxide/Ti(OPri)4
gave the alcohol 118. This on reduction with Na and PMB protection afforded 119. Its cross-
metathesis with ethyl acrylate to 120 followed by alkaline hydrolysis and desilylation gave the
acid 121, which on Mitsunobu cyclization and deprotection furnished (+)-VI.
90
III.2.3. Present Work
From the foregoing it is evident that the previous syntheses of VI were all target-specific,
and most of these were unsuitable to access the stereomers of VI. Moreover, the previous
syntheses of the natural and other stereomers of VI were relatively lengthy (14 to 21 steps), and
often suffered from low yields. However, the focus of the present investigation was to develop a
DOS route to various target molecules including VI. To realize this objective, the initial task was
the preparation of different stereomers of C or its equivalent. We paid particular attention to
using commercially available and inexpensive materials to obtain the products in high yields
under operationally simple reaction conditions. For this, we relied on the Novozym 435®
-
catalyzed acylation strategy using vinyl acetate as the acyl donor. The syntheses of the
stereomers/derivatives of the DOS intermediate and their conversions to the target molecules are
sequentially presented in the following.
Preparation of the DOS intermediates. The synthesis (Scheme III.2.6.) commenced from the
commercially available, 6-methyl-5-hepten-2-one (122) that on reduction with LiAlH4 furnished
the alcohol (±)-123. This was characterized from the IR hydroxyl band at 3373 cm-1
in place of
the carbonyl band, and the NMR resonances viz. δH 1.14 (d, 3H, CH3-CH(OH)), 3.74-3.90 (m,
1H, -CH(OH)) and δC 67.7 (carbinol). Several protocols for the preparation of (R)- or (S)-123
have been reported earlier. These include use of chiral starting materials,73a
kinetic resolution of
(±)-123 by lipase-catalyzed acylation73b-e
or microbial oxidation,73f
asymmetric reduction of 122
with baker’s yeast or alcohol dehydrogenases,73g-i
as well as chemical kinetic resolution.73j
In the
present studies, the alcohol (±)-123 was efficiently resolved by carrying out its acetylation with
vinyl acetate in hexane at room temperature to obtain the (R)-acetate 124 and (S)-123 in >98%
enantiomeric excesses (E≥195) after 50% conversion (cf. GC, 50 min). This protocol is better
91
than a similar protocol reported earlier using a C. antarctica B lipase preparation that required 30
h.73d
Compound (R)-124 showed typical spectral peaks due to the OAc functionality. viz. IR band
at 1736 cm-1
and NMR resonances at δH 2.03 (s) and δC 170.8. Reduction of the acetate (R)-124
with LiAlH4 furnished the alcohol (R)-123. The % ees of (R)- and (S)-123 were determined from
the relative intensities of the methoxyl resonances of the corresponding MTPA esters.14b
The
configurations of (S)- and (R)-123 were assigned based on their reported optical rotations.74a
This
also ascertained the configuration of (R)-124. In a recent paper, same sign of the specific
rotations of (S)-123 and (R)-124 have been reported.51b
Hence we carried out the reaction at least
10-12 times to report the [α]D values. Moreover, our results are consistent with those reported by
another group.51c
It is worth mentioning that despite using CAL-B lipase and similar reaction
conditions, the reaction kinetics were found to be significantly different by two groups.73d,74b
Earlier, Faber and his group have obtained (R)-124 in high yield and % ee by combining the
lipase-catalyzed acylation with in situ inversion or, alternatively, dynamic kinetic resolution
using a Ru-catalyst.73e
However, this protocol is unsuitable for the present work, because we
wanted to synthesize all the stereomers of the DOS intermediate that warranted the availability of
both (R)- and (S)-123.
The enantiomers of the alcohol 123 were individually silylated, as previously described
to obtain (R)- and (S)-125. The 1H NMR spectra of both these compounds were similar, and
showed peaks at δ ~1.05 (s, t-Bu) and multiplets for the aryl protons at δ 7.32-7.44 (6H) and δ
7.65-7.70 (4H), confirming their structures. Next, the olefin functions in (R)- and (S)-125 were
individually subjected to reductive ozonolysis (O3/Ph3P) in CH2Cl2 to get the aldehydes (R)- and
(S)-126 [IR: 2717, 1726 cm-1
; NMR: δH 9.68 (s, 1H) and δC 202.4] respectively. Reaction of (R)-
126 with commercially available vinylmagnesium bromide furnished the allylic alcohol
92
(3RS,6R)-127 as a 1:1 mixture of C-3 epimers. The compound was characterized from the 1H
NMR CH(OH) multiplets at δ 3.98-4.00 (1H), olefinic multiplets at δ 5.01-5.20 (2H) and δ 5.69-
5.86 (1H), and 13
C NMR peaks at δ ~ 73.2 (carbinol) and 114.5 (terminal alkene). Its Novozym
435®-catalyzed acetylation furnished (3R,6R)-127 and (3S,6R)-128 in >98% ees at 50%
conversion (~ 6 h). The reaction was highly stereoselective, and did not proceed further even
under extended shaking (Scheme III.2.6.). A similar sequence of reaction with (S)-127 also
proceeded uneventfully and provided the target intermediate diastereomers (3R,6S)-127 and
(3S,6S)-128 in enantiomerically pure forms. The NMR spectra of the diastereomeric acetates 128
showed characteristic -OCOCH3 resonances viz. δH ~2.01 (s, 3H) and δc ~170.3. The absolute
configurations of the alcohol and acetate were empirically assigned based on the fact that the
Novozym 435®-catalyzed acetylation of allylic alcohols has been found to furnish the (S)-
acetate.29h,i,,75
This is also consistent with Kazlauskas’ empirical rule.61
These results suggested
that chirality at the distant C-6 centre did not have any bearing on the diastereoselectivity of the
chosen lipase-catalyzed resolution of 127. Earlier, depending on the choice of hydrophobic
supports, different immobilized CAL-B lipase preparations showed different enantioselectivities
in the hydrolysis of certain racemic esters.76
Hence, the acetylation of (3RS,6R)- and (3RS,6S)-
127 was also attempted using another recombinant CAL-B lipase preparation (Sigma, L4777),
expressed in Aspergillus niger and adsorbed on a macroporous acrylic resin. However, the
reaction was too slow to be of any use in preparative chemistry. Previously, the synthesis of the
analogs of (3R,6S)-127 and (3S,6S)-128 containing the tert-butyldimethylsilyl protection at C-6
has been described by Enders and Nguyen.77
In this protocol, the C-3 stereogenic centre was
installed using a lipase PS “Amano”-catalyzed acetylation with vinyl acetate in diisopropyl ether.
However, the reaction required higher temperature (40 oC) and extended stirring (72 h).
93
Figure III.2.2. 1H NMR spectrum of (3R,6R)-127
Figure III.2.3. 13
C NMR spectrum of (3R,6R)-127
94
Figure III.2.4. 1H NMR spectrum of (3S,6R)-127
Figure III.2.5. 13
C NMR spectrum of (3S,6R)-127
95
Figure III.2.6. 1H NMR spectrum of (3S,6S)-128
Figure III.2.7. 13
C NMR spectrum of (3S,6S)-128
96
Moreover, this protocol is not amenable to the corresponding 6R-stereomers as it was
derived from (S)-ethyl lactate. The representative 1H and
13C NMR spectra of (3R,6R)- and
(3S,6R)-127, and (3S,6S)-128 are shown in Figures III.2.2. - III.2.7.
To exclude any possible involvement of the protecting group at C-6 in the reaction, the
alcohol (S)-123 was converted to the para-methoxybenzyl (PMB) derivative (S)-129 with para-
methoxybenzyl chloride (PMBCl) in the presence of NaH. The three-proton 1H NMR singlet at δ
3.79 (OMe), two aromatic doublets at δ 6.86 and δ 7.26 (each 2H, J = 7.0 Hz) along with the 13
C
NMR peaks at δ 55.2 (OMe) and at the aromatic region confirmed its PMB function. Oxidative
cleavage (OsO4/NMO; NaIO4) of its olefin function, followed by addition of vinylmagnesium
bromide to the resultant aldehyde 130 gave (3RS,6S)-131, another derivative of the DOS
intermediate. Its IR and NMR spectra showed expected peaks due to the allylic carbinol moiety.
As expected, the Novozym 435®-catalyzed acetylation of (3RS,6S)-131 also furnished (3R,6S)-
131 and (3S,6S)-132 in excellent ees at ~50% conversion (~ 6 h). The E-values of all the lipase-
catalyzed acetylation reactions were >195. Overall, the above simple synthetic strategy provided
the target DOS intermediate in its diastereomeric forms, and as differently protected derivatives.
With all the stereomers of the intermediate in hand, we proceeded for the synthesis of the target
compounds, (-)- and (+)-VI. This also confirmed the assigned configurations of the silylated
DOS intermediates (‘C’ unit equivalents).
97
OTBDPS
124
OAc
(S)-123 +ii i iii
OTBDPS
(R)-125
ivCHO
v
OTBDPS
OH
(3R,6R)-127 +vi
i) LiAlH4/Et2O/0oC/2 h, ii) Novozym 435®/vinyl acetate/hexane/50 min, iii) TBDPSCl/ imidazole/DMAP/CH2Cl2/25
oC/7 h, iv) O3/CH2Cl2/-78oC /1.5 h; Ph3P/-78
oC to 25 oC/18 h,v) CH2=CHMgBr/THF/-78oC/3 h, vi) Novozym
435®/vinyl acetate/25 oC/6 h, vii) NaH/PMBCl/DMF/-5 oC/4 h. viii) OsO4/NMO/t-BuOH-acetone-H2O/25oC/24 h;
NaIO4/CH3CN-H2O/10oC/2 h.
Scheme III.2.6.
O
122
OTBDPS
OAc
(3R,6S)-131 +
OPMB
OAc
i
iii v
v
OPMB
OH
OPMB
viiiCHO
(S)-125
(3RS,6R)-127
iv
(R)-126
(S)-126
(3RS,6S)-127
OPMB
129
130
(3RS,6S)-131
vi
(+)-123
(3R,6S)-127 +
OTBDPS
OAc
OTBDPS
OH
vi
132
vii
91% 92% 88%
81% 84%
82% 73%
(3S,6R)-128
(3S,6S)-128
OH
91% 82% 84%
50%conversion
50%conversion
50%conversion
50%conversion
95%
(R)-114
(S)-123
(S)-123
Synthesis of the natural pyrenophorol enantiomer (-)-VI. For the synthesis, the alcohol
(3S,6R)-127 was subjected to a cross-metathesis reaction with ethyl acrylate in the presence of
Hoveyda Grubbs’ II catalyst to furnish the ester 133. Its 1H NMR spectrum showed a quartet at δ
4.20 (-CO2CH2) and resonances at δ 5.99 and δ 6.88 for the conjugated olefinic moiety. The E-
olefinic geometry was affirmed from the J–value (15.6 Hz) of olefinic resonances. Its carbinol
function was silylated with tert-butyldimethylsilyl chloride (TBSCl)/imidazole/DMAP to obtain
98
134. Its 1H
NMR singlets at δ -0.04 (6H) and 0.85 (9H) confirmed the TBS moiety. This on
alkaline hydrolysis furnished the acid 135 (IR bands at 3500-2500 and 1698 cm-1
). In a parallel
sequence, the acetate (3S,6S)-128 was converted to the alcohol (3S,6S)-127 by treatment with
K2CO3 in MeOH. The spectral data of (3S,6S)-127 were similar to that of its other stereomers. Its
carbinol function was benzylated with BnBr in the presence of NaH as the base to furnish 136.
Its 1H and
13C NMR spectra were complex, suggesting it to be a mixture of rotamers.
Nevertheless, the 1H NMR doublets at δ 4.30 and 4.54 (each 1H, J = 11.8 Hz, PhCH2-) and the
multiplets at δ 7.25-7.29 (5H) were indicative of the Bn group. Its desilylation with Bu4NF
furnished the alcohol 137 (IR band at 3400 cm-1
and absence of NMR resonances for the TBDPS
moiety). Esterification of the acid 135 with 137 under the Mitsunobu conditions afforded the
ester 138 (IR 1715 cm-1
, δc 166.1) as a mixture of rotamers. This was desilylated with aqueous
HF in CH3CN to obtain the diol 139 (broad IR band at 3417 cm-1
and absence of NMR
resonances due to the TBDPS and TBS groups). The Novozym 435®
-catalyzed acrylation of 139
with ethyl acrylate furnished the desired acrylate 140 exclusively. The spectral features of 140
viz. IR peak 1728 cm-1
and the NMR resonances such as δH 5.66-5.83 (m, 2H), δH 6.38 (dd, J =
1.6, 17.2 Hz, 1H) and δc 165.9 were commensurate with its structure. As observed in the
synthesis of V, in this case also, Novozym 435® was found to preferentially acylate the
CH3CH(OH)- moiety without affecting the free allylic alcohol functionality.
99
OTBDPS
OR
OTBDPS
OH
i
(3S,6R)-127 ii92%
OTBDPS
OR
CO2Et
133 R = H134 R = TBS
iii
v
(3S,6S)-128 R = Ac
OTBDPS
OBn
136
vii
R1O O
OR2O
OBn
138 R1 = TBDPS, R2 = TBSviii70% 139 R1 = R2 = H
O O
OH
O
OBn
Ox
O O
OH
O
O
OR
141 R = Bnxi74% (-)-VI R = H
Scheme III.2.7.
OTBDPS
OTBS
CO2H
135
OH
OBn
137
vi
140
quant. 99%
97% 76% 66%
71% 61%
iv91% (3S,6S)-127 R = H
ix
i) CH2=CHCO2Et/Hoveyda Grubbs' II catalyst/CH2Cl2/25oC/3 h, ii) TBSCl/imidazole/DMAP/CH2Cl2/25
oC/7 h,
iii) Aqueous 20% NaOH/MeOH/25 oC/2 h, iv) K2CO3/MeOH/25oC/6 h, v) NaH/BnBr/Bu4NI/THF/reflux/4 h,
vi) Bu4NF/THF/0 to 25oC/8 h, vii) 135//Ph3P/DIAD/THF/0 to 25
oC/18 h, viii) Aqueous HF/MeCN/25 oC/16 h,
ix) CH2=CHCO2Et/Novozyme 435/diisopropyl ether/25oC/30 h, x) Grubbs' II catalyst/CH2Cl2/reflux/72 h,
xi) TiCl4/CH2Cl2/0 to 25oC/0.5 h.
The stage was now set for the RCM reaction of 140 for constructing the required
macrocyclic structure of (-)-VI. This was achieved with Grubbs’ II catalyst in CH2Cl2 to obtain
141 in modest yield after refluxing for 72 h. Control of the olefin geometry in the RCM-
mediated macrocyclization is difficult, as the Ru-catalysts often induce the undesirable olefin
isomerization as a secondary step. This leads to E/Z olefin mixtures with preponderance of the E-
olefin. The composition of the geometrical isomers of products is governed by factors such as
solvent, catalyst, temperature, substrate structure, and product ring size. Nevertheless, we did not
100
Figure III.2.8. 1H NMR spectrum of (-)-VI
Figure III.2.9. 13
C NMR spectrum of (-)-VI
101
isolate any Z-isomer in the conversion of 140 to 141 as revealed from the 1H NMR
spectrum [δH 5.91 (d, J = 16.0 Hz, 2H), 6.74 (dd, J = 7.8, 16.0 Hz, 1H), 6.82 (dd, J = 6.8, 15.6
Hz, 1H)]. A TiCl4-catalyzed debenzylation78
of 141 completed the synthesis of (-)-VI (Scheme
III.2.7.). The spectral (1H and
13C NMR spectra shown in Figures III.2.8. and III.2.9.) and
optical data of (-)-VI matched very well with the reported values.70f
Synthesis of the pyrenophorol enantiomer (+)-VI. The versatility of the DOS synthons was
established by converting them to different other complex natural products, and part of this is
also published.39
In the preceeding section, the alcohol stereomers viz. (3S,6R)- and (3S,6S)-127
were used for the synthesis of (-)-VI. It was hypothesized that since pyrenophorol is a C2-
symmetric molecule with four stereogenic carbinol centres, its non-natural stereomers can also
be synthesized using different stereomers of 127. To explore the possibility, (3R,6R)-127 was
converted to the ester (4R,7R)-133 by a cross-metathesis reaction with ethyl acrylate in the
presence of Grubbs’ II catalyst. The IR peaks at 1716 and 981 cm-1
, and the NMR resonances
viz. δH 5.99 (d, J = 15.5 Hz, 1H) and 6.87 (dd, J = 5.0, 15.5 Hz, 1H) as well as δC 166.6
confirmed the presence of the E-olefinic ester moiety in 133. The 1H and
13C NMR spectra of
(4R,7R)-133 are shown in Figures III.2.10. and III.2.11.
Protection of its carbinol function as the OTHP derivative 142 (δH: 4.51-4.62 (m, 1H) and
δC: 94.6, 95.9, 97.0) followed by alkaline hydrolysis of the ester function furnished the acid 143
(IR: 3500-2500, 1697 cm-1
). Its desilylation with Bu4NF furnished the alcohol 144, as confirmed
from the absence of the TBDPS moiety in its NMR spectra. This on cyclo-dimerization under the
Mitsunobu conditions afforded the pyrenophorol derivative ent-104, which was characterized by
comparing the reported data of its enantiomer.71d
This was converted to (+)-VI by an acid-
102
catalyzed depyranylation (Scheme III.2.8.). The compound was characterized from its reported
chiro-optical and spectral data.71c
103
Figure III.2.10. 1H NMR spectrum of (4R,7R)-133.
Figure III.2.11. 13
C NMR spectrum of (4R,7R)-133.
104
III.3 EXPERIMENTAL SECTION
General methods. The general experimental details were same as those mentioned in Chapter II.
(±)-Tridec-12-en-2-ol (67).
To a stirred solution of the Grignard reagent prepared from 66 (10.0 g, 43.1 mmol) and Mg (1.25
g, 51.8 mmol) in THF (170 mL) was added acetaldehyde (3.61 mL, 64.7 mmol) in THF (20 mL).
After stirring for 3 h, the mixture was treated with aqueous saturated NH4Cl, the organic layer
separated, and the aqueous portion extracted with Et2O (3 × 80 mL). The combined organic
extracts were washed with H2O (3 × 15 mL) and brine (1 × 5 mL), dried and concentrated in
vacuo. The residue was purified by column chromatography (silica gel, 0-10% Et2O/hexane) to
afford pure (±)-67 (7.7 g, 90%). colorless oil; IR: 3374, 1640 cm-1
; 1H NMR: δ 1.17 (d, J = 6.2
Hz, 3H), 1.28-1.52 (m containing a s at δ 1.29, 17H), 1.97-2.04 (m, 2H), 3.73-3.82 (m, 1H),
4.89-5.01 (m, 2H), 5.73-5.87 (m, 1H); 13
C NMR: δ 23.2, 25.7, 28.8, 29.0, 29.3, 29.4, 29.5, 33.7,
39.2, 67.7, 113.9, 138.9. Anal. Calcd. for C13H26O: C, 78.72; H, 13.21%. Found: C, 78.58; H,
12.93%.
Optimization of the lipase-catalyzed acetylation of (±)-67. A mixture (±)-67 (2 mmol), vinyl
acetate (3 mmol) and different lipases in hexane or diisopropyl ether (3 mL) was agitated on an
orbital shaker at 110 rpm at 25 oC for different periods (Table III.1.1.). The extent of conversion
was determined by analyzing an aliquot of the reaction mixture by GC. The GC analyses were
carried out with a Shimadzu GC–2010 Plus instrument (Shimadzu Corporation, Kyoto, Japan)
equipped with a split/splitless injector, FID detector using a DB-5 (5%-phenyl)-
methylpolysiloxane, J&W Scientific, Folsom, CA, USA) capillary column (length, 30 m; i.d.,
0.25 mm and film thickness, 0.25 µm). The operating conditions were: column temperature
105
programmed from 80 to 200 ºC at the rate of 4 ºC/min, held at initial temperature for 5 min and
at 200 ºC for 2 min and further to 280 ºC at the rate of 10 ºC/min, held at final temperature for 10
min; injection port temperature: 210 ºC; carrier gas He (flow rate, 1.0 mL/min). Samples (0.1
µL) were injected in the splitless mode.
(R)-12-Acetoxytridec-1-ene 68.
A mixture of (±)-67 (3.5 g, 17.7 mmol), vinyl acetate (2.4 mL, 26.4 mmol) and Novozyme 435®
(0.175 g) in diisopropyl ether (25 mL) was agitated on an orbital shaker at 110 rpm for (75 min).
The reaction mixture was filtered, and the solution concentrated in vacuo to get a residue, which
on column chromatography (silica gel, 0-10% EtOAc/hexane) gave pure (S)-67 (1.9 g, 54%) and
(R)-68 (1.5 g, 35%). (S)-67: colorless oil; [α]D24
+5.7 (c 1.15, CHCl3). (R)-68: colorless oil;
[α]D24
-1.7 (c 1.06, CHCl3); IR: 1738, 1243 cm-1
; 1H NMR: δ 1.18 (d, J = 6.2 Hz, 3H), 1.22-1.63
(m containing a s at δ 1.25, 16H), 1.98-2.10 (m containing a s at δ 2.01, 5H), 4.82-5.01 (m, 3H),
5.77-5.81 (m, 1H); 13
C NMR: δ 19.5, 20.8, 25.1, 28.6, 28.8, 29.1, 29.2, 33.5, 35.6, 70.4, 113.8,
138.5, 169.9. Anal. Calcd. for C15H28O2: C, 74.95; H, 11.74%. Found: C, 74.71; H, 12.03%.
(S)-Tridec-12-en-2-ol (S)-67.
Following the same procedure, (S)-67 (1.9 g, 9.60 mmol) (obtained from the above experiment)
was acetylated with vinyl acetate till 15% conversion, and the product purified by column
chromatography to obtain enantiomerically pure (S)-67 (1.5 g, 80%). colorless oil; [α]D26
+6.7 (c
1.50, CHCl3); IR: 3348, 1641, 992 cm-1
; 1H NMR δ 1.17 (d, J = 6.2 Hz, 3H), 1.26-1.53 (m
containing a s at δ 1.53, 17H), 1.97-2.08 (m, 2H), 3.71-3.83 (m, 1H), 4.89-5.03 (m, 2H), 5.70-
106
5.90 (m, 1H); 13
C NMR: δ 23.3, 25.7, 28.8, 29.0, 29.4, 29.5, 29.6, 33.7, 39.2, 67.9, 114.0, 139.0.
Anal. Calcd. for C13H26O: C, 78.72; H, 13.21%. Found: C, 78.60; H, 13.44%.
(R)-Tridec-12-en-2-ol (R)-67.
A mixture of (R)-68 (2.18 g, 9.10 mmol) and 2M K2CO3 in 10% aqueous MeOH (20 mL) was
stirred at room temperature for 6 h. The mixture was filtered, concentrated in vacuo, H2O (30
mL) added into it, and extracted with EtOAc (2 × 20 mL). The organic layer was washed with
H2O (2 × 10 mL) and brine (1 × 5 mL), and dried. Removal of solvent in vacuo followed by
column chromatography of the residue (silica gel, 0-10% EtOAc/hexane) afforded pure (R)-67
(1.7 g, ~quant.). colorless oil; [α]D25
-6.3 (c 1.15, CHCl3); IR: 3371, 1640, 991 cm-1
; 1H NMR: δ
1.18 (d, J = 6.2 Hz, 3H), 1.23-1.54 (m containing a s at δ 1.28, 17H), 1.99-2.06 (m, 2H), 3.75-
3.81 (m, 1H), 4.90-5.04 (m, 2H), 5.75-5.88 (m, 1H); 13
C NMR: δ 23.4, 25.7, 28.9, 29.1, 29.4,
29.5, 29.6, 33.8, 39.3, 68.1, 114.0, 139.2. Anal. Calcd. for C13H26O: C, 78.72; H, 13.21%. Found:
C, 78.35; H, 13.56%.
(R)-12-tert-Butyldiphenylsilyloxytridec-1-ene 69.
Silylation of (R)-67 (1.6 g, 8.08 mmol) with TBDPSCl (2.67 g, 9.70 mmol), imidazole (0.82 g,
12.12 mmol) and DMAP (catalytic) in CH2Cl2 (20 mL) followed by work-up and column
chromatography (silica gel, 0-5% EtOAc/hexane) afforded pure 69 (3.3 g, 93%). colorless oil;
[α]D26
+16.3 (c 1.16, CHCl3); IR: 997, 910 cm-1
; 1H NMR: δ 1.07 (merged s and d, J = 6.0 Hz,
12H), 1.22-1.65 (m, 16H), 2.01-2.09 (m, 2H), 3.78-3.90 (m, 1H), 4.90-5.10 (m, 2H), 5.74-5.94
(m, 1H), 7.38-7.48 (m, 6H), 7.66-7.74 (m, 4H); 13
C NMR: δ 19.3, 23.2, 25.2, 27.0, 28.9, 29.1,
107
29.5, 29.6, 33.8, 39.5, 69.6, 114.1, 127.3, 127.4, 129.4, 134.7, 135.0, 135.9, 139.2. Anal. Calcd.
for C29H44OSi: C, 79.75; H, 10.15%. Found: C, 79.56; H, 10.47%.
(2RS,12R)-12-tert-Butyldiphenylsilyloxytridecane-1,2-diol 70.
To a stirred solution of 69 (3.54 g, 8.12 mmol) and NMO (2.19 g, 16.24 mmol) in acetone-H2O
(8:1, 20 mL) was added OsO4 (0.103 g, 0.41 mmol) in tert-BuOH (4 mL). After consumption of
69 (cf. TLC, 10 h), the reaction mixture was treated with aqueous saturated Na2SO3 and stirred
for 1 h. The organic layer was separated and the aqueous portion extracted with EtOAc (3 × 100
mL). The combined organic extracts were washed with H2O (2 × 30 mL) and brine (1 × 10 mL),
dried and concentrated in vacuo. The residue was purified by column chromatography (silica gel,
0-40% EtOAc/hexane) to afford pure 70 (3.6 g, 95%). colorless oil; [α]D27
+12.0 (c 1.05, CHCl3);
IR: 3375 cm-1
; 1H NMR: δ 1.08 (merged s and d, J = 6.0 Hz, 12H), 1.15-1.47 (m, 18H), 1.69
(broad s, 2H), 3.43-3.52 (m, 1H), 3.65-3.88 (m, 3H), 7.35-7.48 (m, 6H), 7.67-7.78 (m, 4H); 13
C
NMR: δ 19.2, 23.2, 25.2, 25.5, 27.0, 29.5, 29.6, 33.2, 39.4, 66.8, 69.6, 72.3, 127.3, 127.4, 129.3,
134.7, 135.0, 135.8. Anal. Calcd. for C29H46O3Si: C, 73.99; H, 9.85%. Found: C, 73.78; H,
9.75%.
(R)-11-tert-Butyldiphenylsilyloxydodecanal 71.
To a cooled (0 oC) and stirred solution of 70 (3.86 g, 8.21 mmol) in MeCN-H2O (3:2, 15 mL)
was added NaIO4 (3.52 g, 16.43 mmol). After stirring for 2 h, the mixture was concentrated in
vacuo, the residue taken in EtOAc (30 mL) and washed successively with H2O (1 × 10 mL),
aqueous 10% NaHSO3 (1 × 10 mL), H2O (2 × 10 mL) and brine (1 × 5 mL), and dried. Solvent
108
removal furnished the pure aldehyde 71 (3.2 g, 91%). colorless oil; [α]D27
+14.9 (c 1.03, CHCl3);
IR: 2712, 1727 cm-1
; 1H NMR: δ 1.09 (merged s and d, J = 6.2 Hz, 12H), 1.18-1.40 (m, 12H),
1.60-1.80 (m, 4H), 2.46 (dt, J = 1.8, 7.2 Hz, 2H), 3.79-3.95 (m, 1H), 7.35-7.48 (m, 6H), 7.72-
7.83 (m, 4H), 9.80 (t, J = 1.8 Hz, 1H); 13
C NMR: δ 19.0, 21.9, 23.0, 24.5, 25.0, 26.8, 28.8, 29.0,
29.1, 29.2, 29.3, 33.8, 39.2, 43.7, 69.4, 127.1, 127.2, 129.2, 134.5, 134.8, 135.7, 179.6. Anal.
Calcd. for C28H42O2Si: C, 76.66; H, 9.65%. Found: C, 76.33; H, 9.84%.
(3RS,13R)-13-tert-Butyldiphenylsilyloxytetradec-1-en-3-ol (3RS,13R)-72.
To a cooled (-40 oC) and stirred solution of 71 (3.0 g, 6.84 mmol) in THF (20 mL) was added
CH2=CHMgBr (13.7 mL, 1M in THF, 13.7 mmol). After stirring for 1 h, H2O (15 mL) was
added to the mixture, the organic layer separated, and the aqueous layer extracted with EtOAc (2
× 10 mL). The combined organic extracts were washed with H2O (1 × 10 mL) and brine (1 × 5
mL), and dried. Solvent removal followed by column chromatography (silica gel, 0-15% EtOAc-
hexane) of the residue gave pure (3RS,13R)-72 (2.9 g, 90%). colorless oil; [α]D27
+14.2 (c 1.08,
CHCl3); IR: 3359, 996, 920 cm-1
; 1H NMR: δ 1.03 (merged s and d, J = 6.0 Hz, 12H), 1.15-1.35
(m, 12H), 1.45-1.68 (m containing a s at 1.56, 7H), 3.73-3.85 (m, 1H), 4.03-4.13 (m, 1H), 5.07-
5.25 (m, 2H), 5.76-5.96 (m, 1H), 7.29-7.41 (m, 6H), 7.63-7.78 (m, 4H); 13
C NMR: δ 19.2, 23.2,
25.2, 25.3, 27.0, 29.5, 37.0, 39.4, 69.6, 73.2, 114.5, 127.3, 127.4, 129.3, 129.4, 134.6, 134.9,
135.8, 141.3. Anal. Calcd. for C30H46O2Si: C, 77.19; H, 9.93%. Found: C, 77.44; H, 10.21%.
(3S,13R)-3-Acetoxy-13-tert-butyldiphenylsilyloxytetradec-1-ene 73. Acetylation of
(3RS,13R)-72 (2.1 g, 4.51 mmol) with vinyl acetate (0.58 g, 6.76 mmol) in diisopropyl ether (25
mL) and Novozym 435® (0.035 g) for 6 h, followed by usual work up, isolation and purification
109
by column chromatography (silica gel, 0-10% EtOAc/hexane) gave pure (3R,13R)-72 (0.860 g,
41%) and 73 (0.860 g, 45%).
(3R,13R)-72:
colorless oil; [α]D22
+11.9 (c 1.05, CHCl3); IR: 3367, 991, 927 cm-1
; 1H NMR: δ 1.01 (merged s
and d, J = 5.8 Hz, 12H), 1.15-1.26 (m, 14H), 1.44-1.55 (m, 4H), 2.01 (s, 1H), 3.78-3.81 (m, 1H),
4.05-4.11 (m, 1H), 5.04-5.24 (m, 2H), 5.76-5.84 (m, 1H), 7.32-7.37 (m, 6H), 7.62-7.67 (m, 4H);
13C NMR: δ 19.2, 23.2, 25.2, 26.9, 29.6, 37.1, 39.3, 69.5, 73.3, 114.8, 127.6, 129.4, 134.9, 135.8,
141.3. Anal. Calcd. for C30H46O2Si: C, 77.19; H, 9.93%. Found: C, 77.29; H, 9.71%.
73:
colorless oil; [α]D22
+9.1 (c 1.02, CHCl3); IR: 1732, 1246, 997 cm-1
; 1H NMR: δ 1.05 (s, 9H),
1.20-1.28 (m, 17H), 1.42-1.66 (m, 4H), 2.07 (s, 3H), 3.81-3.84 (m, 1H), 5.15-5.17 (m, 1H), 5.22-
5.26 (m, 2H), 5.75-5.80 (m, 1H), 7.35-7.46 (m, 6H), 7.70-7.78 (m, 4H); 13
C NMR: δ 19.3, 21.3,
23.3, 25.1, 25.2, 27.1, 29.4, 29.5, 29.6, 29.7, 32.6, 34.2, 39.5, 69.6, 74.9, 116.5, 127.4, 127.5,
127.6, 129.4, 134.7, 135.0, 135.6, 135.9, 136.7, 170.4. Anal. Calcd. for C32H48O3Si: C, 75.74; H,
9.51%. Found: C, 75.82; H, 9.86%.
(3S,13R)-13-tert-Butyldiphenylsilyloxytetradec-1-en-3-ol (3S,13R)-72.
Hydrolysis of 73 (0.80 g, 1.57 mmol) with 2M K2CO3 in aqueous MeOH (25 mL) followed by
work-up and column chromatography (silica gel, 0-10% EtOAc/hexane) afforded pure (3S,13R)-
110
72 (0.725 g, ~quant.). colorless oil; [α]D23
+14.7 (c 1.01, CHCl3); IR: 3367, 1006, 927 cm-1
; 1H
NMR: δ 1.03 (merged s and d, J = 6.0 Hz, 12H), 1.15-1.26 (m, 14H), 1.47-1.56 (m, 4H), 3.75-
3.82 (m, 1H), 4.05-4.11 (m, 1H), 5.04-5.24 (m, 2H), 5.76-5.88 (m, 1H), 7.36-7.39 (m, 6H), 7.62-
7.67 (m, 4H); 13
C NMR: δ 19.3, 23.2, 25.2, 25.4, 27.1, 29.6, 37.1, 39.5, 69.6, 73.3, 114.5, 127.4,
127.6, 129.4, 134.7, 135.0, 135.6, 135.9, 141.4. Anal. Calcd. for C30H46O2Si: C, 77.19; H,
9.93%. Found: C, 77.37; H, 10.28%.
(3S,13R)-13-tert-Butyldiphenylsilyloxy-3-tetrahydropyranyloxytetradec-1-ene 74.
A mixture of (3S,13R)-72 (0.7 g, 1.5 mmol), DHP (0.2 mL, 2.25 mmol) and PPTS (catalytic) in
CH2Cl2 (10 mL) was stirred for 4 h at room temperature. The mixture was poured into ice-cold
aqueous 10% NaHCO3 (20 mL), the organic layer separated and the aqueous portion extracted
with CHCl3 (3 × 10 mL). The combined organic extracts were washed with H2O (2 × 10 mL) and
brine (1 × 10 mL), and dried. Removal of solvent in vacuo followed by purification of the
residue by column chromatography (silica gel, 0-5% EtOAc/hexane) afforded pure 74 (0.73 g,
88%). colorless oil; [α]D29
+8.9 (c 1.07, CHCl3); IR: 1320, 1259, 1077 cm-1
; 1H NMR: δ 1.04
(merged s and d, J = 6.0 Hz, 12H), 1.16-1.25 (m, 14H), 1.49-1.65 (m, 10H), 3.42-3.52 (m, 1H),
3.76-3.89 (m, 2H), 4.03-4.07 (m, 1H), 4.63-4.68 (m, 1H), 5.11-5.24 (m, 2H), 5.56-5.86 (m, 1H),
7.34-7.38 (m, 6H), 7.64-7.69 (m, 4H); 13
C NMR: δ 19.2, 19.6, 23.2, 25.0, 25.2, 25.5, 27.0, 29.5,
29.6, 30.8, 35.6, 39.4, 62.3, 69.6, 95.0, 97.7, 114.7, 117.2, 127.3, 127.4, 129.3, 129.4, 134.6,
135.0, 135.9, 138.7, 139.8. Anal. Calcd. for C35H54O3Si: C, 76.31; H, 9.88%. Found: C, 76.71;
H, 10.28%.
111
(2RS,3S,13R)-13-tert-Butyldiphenylsilyloxy-3-tetrahydropyranyloxytetradecane-1,2-diol 75.
Dihydroxylation of 74 (0.7 g, 1.27 mmol) with NMO (0.171 g, 2.54 mmol) and OsO4 (0.016 g,
0.06 mmol) in acetone-H2O (8:1, 10 mL) followed by usual isolation and column
chromatography (silica gel, 0-40% EtOAc/hexane) afforded pure 75 (0.730 g, 98%). colorless
oil; [α]D26
+4.5 (c 1.03, CHCl3); IR: 3410, 1389, 1183 cm-1
; 1H NMR: δ 1.03 (merged s and d, J
= 6.0 Hz, 12H), 1.17-1.24 (m, 14H), 1.44-1.86 (m, 10H), 1.89-2.19 (m, 2H), 3.47-3.57 (m, 2H),
3.63-3.76 (m, 4H), 3.79-3.88 (m, 1H), 4.06-4.10, 4.29-4.39 and 4.72-4.75 (three m, 1H), 7.34-
7.41 (m, 6H), 7.64-7.68 (m, 4H); 13
C NMR: δ 19.1, 19.9, 21.6, 23.1, 24.8, 25.1, 25.2, 25.4, 25.9,
26.9, 29.4, 29.7, 30.8, 31.2, 31.3, 32.2, 39.3, 63.0, 63.2, 65.8, 69.5, 72.7, 73.2, 79.2, 83.1, 99.1,
102.4, 127.2, 127.3, 129.2, 129.3, 134.5, 134.8, 135.8. Anal. Calcd. for C35H56O5Si: C, 71.87; H,
9.65%. Found: C, 71.48; H, 9.77%.
(2S,12R)-12-tert-Butyldiphenylsilyloxy-2-tetrahydropyranyloxytridecanal 76.
Reaction of 75 (0.73 g, 1.25 mmol) with NaIO4 (0.535 g, 2.50 mmol) in MeCN-H2O (3:2, 15
mL) at 0 oC, followed by usual work-up furnished the pure aldehyde 76 (0.620 g, 90%). colorless
oil; [α]D25
-16.7 (c 1.01, CHCl3); IR: 2707, 1734 cm-1
; 1H NMR: δ 1.04 (merged s and d, J = 6.2
Hz, 12H), 1.17-1.25 (m, 12H), 1.31-1.88 (m, 12H), 3.46-3.56 (m, 1H), 3.74-3.92 (m, 2H), 4.17
(dt, J = 1.4, 7.2 Hz, 1H), 4.53-4.56 and 4.67-4.70 (two m, 1H), 7.35-7.41 (m, 6H), 7.62-7.70 (m,
4H), 9.63 (d, J = 1.6 Hz, 1H); 13
C NMR: δ 19.2, 19.3, 23.2, 25.1, 25.2, 25.3, 27.0, 29.3, 29.4,
29.5, 30.0, 30.5, 39.4, 62.6, 69.5, 79.8, 83.6, 97.6, 100.9, 127.3, 127.4, 129.3, 129.4, 134.6,
112
134.9, 135.8, 203.4, 203.9. Anal. Calcd. for C34H52O4Si: C, 73.86; H, 9.48%. Found: C, 73.75;
H, 9.88%.
(3RS,4S,14R)-14-tert-Butyldiphenylsilyloxy-4-tetrahydropyranyloxypentadec-1-en-3-ol 77.
As described above, reaction of 76 (0.600 g, 1.09 mmol) with CH2=CHMgBr (2.2 mL, 1M in
THF, 2.20 mmol) in THF (10 mL) at -78 oC, followed by usual work up, and column
chromatographic purification (silica gel, 0-20% EtOAc/hexane) afforded pure 77 (0.547 g, 87%).
colorless oil; [α]D27
-6.4 (c 1.09, CHCl3); IR: 3433, 996, 921 cm-1
; 1H NMR: δ 1.02 (merged s
and d, J = 6.2 Hz, 12H), 1.06-1.29 (m, 15H), 1.31-1.66 (m, 8H), 1.77-1.82 (m, 2H), 3.44-3.66
(m, 2H), 3.71-4.04 (m, 3H), 4.18-4.45 and 4.62-4.78 (two m, 1H), 5.10-5.33 (m, 2H), 5.76-5.93
(m, 1H), 7.21-7.41 (m, 6H), 7.60-7.68 (m, 4H); 13
C NMR: δ 13.9, 19.0, 19.7, 21.0, 23.1, 24.8,
25.0, 25.2, 25.7, 25.8, 26.9, 29.3, 29.5, 30.7, 31.1, 31.8, 36.9, 39.2, 62.7, 63.0, 64.9, 69.4, 72.8,
73.5, 74.7, 79.1, 85.2, 97.3, 99.1, 102.1, 114.0, 116.0, 116.3, 127.2, 127.3, 129.1, 129.2, 134.4,
134.7, 135.6, 136.6, 136.8, 138.0, 141.4. Anal. Calcd. for C36H56O4Si: C, 74.43; H, 9.72%.
Found: C, 74.19; H, 9.97%.
(3RS,4S,14R)-14-tert-Butyldiphenylsilyloxy-3,4-isopropylidenedioxypentadec-1-ene 78.
A solution of 77 (0.23 g, 0.40 mmol) and PPTS (20 mol%) in MeOH (5 mL) was stirred for 6 h
at room temperature. Concentration of the mixture in vacuo gave the crude product, which was
diluted with 2,2-DMP (1 mL) and stirred for 12 h at room temperature. The mixture was
concentrated in vacuo, H2O (15 mL) added into it, and extracted with EtOAc (2 × 15 mL). The
113
organic layer was washed with H2O (2 × 10 mL) and brine (1 × 5 mL), and dried. Removal of
solvent in vacuo followed by column chromatography of the residue (silica gel, 0-10%
EtOAc/hexane) afforded pure 78 (0.190 g, 91%). colorless oil; [α]D21
+28.8 (c 1.04, CHCl3); IR:
3399, 992, 926 cm-1
; 1H NMR: δ 1.04 (merged s and d, 12H), 1.21-1.29 (m, 10H), 1.37-1.66 (m
containing two s at δ 1.37 and 1.42, 14H), 3.62-3.70, 3.81-3.84, 3.95-3.98, 4.13-4.14, and 4.46-
4.48 (five m, 3H), 5.22-5.37 (m, 2H), 5.79-5.84 (m, 1H), 7.35-7.45 (m, 6H), 7.65-7.75 (m, 4H);
13C NMR: δ 19.3, 23.2, 25.2, 25.7, 26.2, 27.1, 28.3, 29.5, 29.6, 29.7, 30.4, 39.5, 69.6, 78.3, 79.9,
80.7, 82.8, 108.0, 108.5, 118.1, 118.7, 127.4, 127.6, 129.3, 129.4, 134.7, 135.0, 135.6, 135.9.
Anal. Calcd. for C34H52O3Si: C, 76.07; H, 9.76%. Found: C, 75.91; H, 9.79%.
(2R,12S,13RS)-12,13-Isopropylidenedioxypentadec-14-en-2-ol 79.
To a cooled (0 oC) and stirred solution of 78 (0.26 g, 0.49 mmol) in THF (5 mL) was added
Bu4NF (0.97 mL, 0.97 mmol, 1 M in THF). After stirring for 4 h, the mixture was concentrated
in vacuo, the residue taken in EtOAc (10 mL) and the combined organic extracts washed with
H2O (1 × 5 mL) and brine (1 × 5 mL), and dried. The residue was purified by column
chromatography (silica gel, 0-30% EtOAc/hexane) to afford pure 79 (0.131 g, 91%). colorless
oil; [α]D24
-3.3 (c 1.10, CHCl3); IR: 3399, 992, 926 cm-1
; 1H NMR: δ 1.15-1.55 (m containing a d
at δ 1.17, J = 6.2 Hz, and two s at δ 1.39 and δ 1.47, 27H), 3.59-3.83, 3.93-4.17 and 4.42-4.49
(three m, 3H), 5.19-5.39 (m, 2H), 5.71-5.90 (m, 1H); 13
C NMR: δ 23.2, 25.5, 25.6, 25.9, 26.0,
26.8, 27.2, 28.1, 29.3, 29.4, 29.5, 30.2, 31.7, 39.1, 68.0, 78.2, 79.7, 80.5, 82.6, 107.9, 108.3,
118.0, 118.6, 134.4, 135.4. Anal. Calcd. for C18H34O3: C, 72.44; H, 11.48%. Found: C, 72.46; H,
11.61%.
114
(3RS,4S,14R)-14-Acryloxy-3,4-isopropylidenedioxypentadec-1-ene 80.
A mixture of 79 (0.12 g, 0.40 mmol), ethyl acrylate (0.33 mL, 3.20 mmol) and Novozym 435®
(0.10 g) was agitated on an orbital shaker at 110 rpm for 24 h. The reaction mixture was filtered,
and concentrated in vacuo to get a residue, which on column chromatography (silica gel, 0-30%
EtOAc/hexane) gave pure 80 (0.100 g, 93% based on conversion) along with unreacted 79
(16%). colorless oil; [α]D23
-4.9 (c 1.03, CHCl3); IR: 1723, 986 cm-1
; 1H NMR: δ 1.20-1.67 (m
containing a d at δ 1.22, J = 6.2 Hz, and two s at δ 1.35 and 1.47, 27H), 3.65-3.82, 3.93-4.00,
4.07-4.16, and 4.42-4.49 (four m, 2H), 4.91-5.00 (m, 1H), 5.18-5.38 (m, 2H), 5.71-5.89 (m, 2H),
6.01-6.15 (m, 1H), 6.35 (dd, J = 1.8, 17.2 Hz, 1H); 13
C NMR: δ 19.9, 25.3, 25.7, 26.0, 26.8,
27.3, 28.2, 29.3, 29.5, 30.2, 31.8, 35.9, 71.2, 78.2, 79.9, 80.7, 82.7, 107.9, 108.4, 118.0, 118.7,
129.0, 130.1, 134.6, 135.5, 165.9. Anal. Calcd. for C21H36O4: C, 71.55; H, 10.29%. Found: C,
71.46; H, 10.61%.
(4RS,5S,15R)-4,5-Dihydroxyhexadec-2-en-15-olide 4,5-acetonide (Va).
A mixture of 80 (0.05 g, 0.14 mmol) and Grubbs’ II catalyst (5 mol%) in CH2Cl2 (10 mL) was
refluxed for 8 h. The reaction mixture was concentrated in vacuo and the residue subjected to
column chromatography (silica gel, 0-40% EtOAc/hexane) to afford pure Va (0.037 g, 81%).
viscous gum; [α]D24
-20.9 (c 1.10, CHCl3); IR: 1713, 982 cm-1
; 1H NMR: δ 1.12-1.42 (m
115
containing a d at δ 1.27, J = 6.4 Hz and two s at δ 1.36 and δ 1.50, 20H), 1.50-1.60 (m, 7H),
4.15-4.24 (m, 1H), 4.55-4.62 (m, 1H), 4.98-5.10 (m, 1H), 6.00 (d, J = 15.6 Hz, 1H), 6.83 (dd, J
= 7.8, 15.6 Hz, 1H); 13
C NMR: δ 20.4, 23.1, 23.5, 25.4, 26.6, 26.7, 27.0, 27.2, 28.0, 28.3, 29.7,
35.0, 71.0, 76.3, 78.6, 108.7, 124.9, 142.2, 165.4. Anal. Calcd. for C19H32O4: C, 70.33; H, 9.94%.
Found: C, 70.57; H, 9.83%.
(3RS,4S,14R)-4-Tetrahydropyranyloxypentadec-1-ene-3,14-diol 81.
Desilylation of (3RS,4S,14R)-77 (0.73 g, 1.26 mmol) with Bu4NF (2.5 mL, 1 M in THF, 2.5
mmol) in THF (10 mL) at 0 oC, followed by usual isolation and purification by column
chromatography (silica gel, 0-30% EtOAc/hexane) afforded pure 81 (0.360 g, 84%). colorless
oil; [α]D25
-17.8 (c 1.08, CHCl3); IR: 3399, 992, 925 cm-1
; 1H NMR: δ 1.18 (d, J = 6.2 Hz, 3H),
1.21-1.87 (m, 26H), 3.45-3.56 (m, 1H), 3.59-3.84 (m, 2H), 3.85-4.03 (m, 2H), 4.20-4.54 and
4.65-4.88 (two m, 1H), 5.16-5.46 (m, 2H), 5.82-5.99 (m, 1H); 13
C NMR: δ 19.5, 19.7, 20.9, 23.1,
24.7, 25.1, 25.5, 25.6, 29.2, 29.3, 29.4, 29.6, 30.5, 31.0, 31.6, 36.8, 39.0, 62.5, 64.8, 67.4, 72.6,
73.4, 74.5, 79.1, 84.9, 97.3, 101.9, 113.8, 115.8, 116.2, 136.5, 136.8, 137.8, 141.3. Anal. Calcd.
for C20H38O4: C, 70.13; H, 11.18%. Found: C, 69.74; H, 11.55%.
(3RS,4S,14R)-14-Acryloxy-4-tetrahydropyranyloxypentadec-1-en-3-ol 82.
A mixture of 81 (0.30 g, 0.88 mmol) and Novozym 435® (0.20 g) in ethyl acrylate (0.80 mL,
7.04 mmol) was agitated on an orbital shaker at 110 rpm for 72 h. The reaction mixture was
116
concentrated in vacuo to get a residue, which on column chromatography (silica gel, 0-30%
EtOAc/hexane) gave pure 82 (0.236 g, 88% based on conversion) and unreacted 81 (23%).
colorless oil; [α]D25
-5.1 (c 1.18, CHCl3); IR: 3429, 1723, 1638, 1618, 986, 921 cm-1
; 1H NMR:
δ 1.19-1.69 (m, 27H), 1.76-1.88 (m, 1H), 3.35-3.70 (m, 2H), 3.82-4.12 (m, 2H), 4.37-4.46 (m,
1H), 4.90-5.12 (m, 1H), 5.15-5.45 (m, 2H), 5.75-5.94 (m, 2H), 6.01-6.14 (m, 1H), 6.32-6.50 (m,
1H); 13
C NMR: δ 14.0, 19.8, 21.2, 22.6, 24.8, 25.2, 25.9, 29.3, 29.6, 31.2, 32.0, 35.8, 36.9, 65.2,
71.1, 73.0, 74.8, 85.4, 102.0, 102.3, 114.2, 116.5, 117.2, 129.0, 130.0, 136.7, 137.0, 141.3, 165.8.
Anal. Calcd. for C23H40O5: C, 69.66; H, 10.17%. Found: C, 69.35; H, 10.53%.
(5RS,6S,16R,3E)-5-Hydroxy-16-methyl-6-(tetrahydropyranyloxy)oxacyclohexadec-3-en-2-
one 83.
A mixture of 82 (0.10 g , 0.25 mmol) and Grubbs’ II catalyst (20 mol%) in CH2Cl2 (10 mL) was
refluxed for 4 h. Usual work-up, and purification by column chromatography (silica gel, 0-40%
EtOAc/hexane) afforded pure 83 (0.063 g, 68%). colorless oil; [α]D27
-17.0 (c 1.00, CHCl3); IR:
3404, 1711, 985 cm-1
; 1H NMR: δ 1.18-1.46 (m, 28H), 3.49-3.54, 3.70-3.76, 3.91-3.94 and 4.18-
4.22 (four m, 3H), 4.59-4.62 (m, 1H), 4.72-4.81 (m, 1H), 4.88-5.10 (m, 1H), 6.04-6.18 (m, 1H),
6.82-6.95 (m, 1H); 13
C NMR: δ 20.3, 20.6, 22.3, 22.7, 23.4, 23.8, 25.2, 26.1, 27.0, 27.4, 27.7,
27.8, 28.9, 29.3, 29.5, 29.7, 30.3, 31.0, 31.1, 31.9, 35.1, 35.6, 63.0, 70.9, 71.3, 78.3, 82.5, 96.1,
100.4, 122.1, 123.0, 145.1, 145.8, 165.6, 166.1. Anal. Calcd. for C21H36O5: C, 68.44; H, 9.85%.
Found: C, 68.62; H, 9.52%.
117
(6S,16R,3E)-16-Methyl-6-(tetrahydropyranyloxy)oxacyclohexadec-3-ene-2,5-dione 84.
As described in the previous chapter, oxidation of 83 (0.03 g, 0.08 mmol) with PCC (0.027 g,
0.12 mmol) and NaOAc (10 mol%) in CH2Cl2 (5 mL) followed by work-up and column
chromatography (silica gel, 0-15% EtOAc/hexane) furnished pure 84 (0.027 g, 89%). colorless
oil; [α]D25
-53.0 (c 1.00, CHCl3); IR: 1725, 980 cm-1
; 1H NMR: δ 1.14-1.88 (m, 27H), 3.46-3.54
(m, 1H), 3.80-3.88 (m, 1H), 4.40-4.58 (m, 1H), 4.86-5.12 (m, 1H), 6.78 (d, J = 15.8 Hz, 1H),
7.28 (d, J = 15.8 Hz, 1H); 13
C NMR: δ 19.4, 20.1, 22.0, 22.7, 23.6, 25.3, 26.6, 27.5, 27.6, 28.9,
29.1, 29.3, 29.7, 30.5, 30.6, 31.9, 33.8, 34.7, 62.9, 72.6, 80.0, 97.7, 132.1, 134.9, 165.0, 199.7.
Anal. Calcd. for C21H34O5: C, 68.82; H, 9.35%. Found: C, 68.40; H, 9.49%.
Antibiotic (-)-A26771B (V).
To a cooled (0 oC) and stirred solution of 84 (0.025 g, 0.07 mmol) in moist THF (5 mL) was
added TFA (0.27 mL). After stirring for 3 h, the mixture was concentrated in vacuo to afford the
corresponding depyranylated product (0.02 g). To a solution of the above crude product in
CH2Cl2 (5 mL) was added DMAP (catalytic), followed by succinic anhydride (0.011 g, 0.11
mmol). After stirring for 2 h, the reaction mixture was concentrated and the residue subjected to
preparative TLC (8% MeOH/CHCl3) to afford pure V (0.019 g, 74%). white powder; mp: 122 oC
(lit.63
mp: 121-123 oC); [α]D
25 -12.2 (c 0.5, MeOH), (lit.
63 [α]D
12 -13 (c 0.2, MeOH)); IR: 3420,
118
1748, 1713, 1701 cm-1
; 1H NMR: δ 1.24-1.43 (m containing a d at δ 1.28, J = 6.5 Hz, 15H),
1.56-2.01 (m, 6H), 2.29 (t, J = 7.0 Hz, 2H), 2.65-2.69 (m, 2H), 5.10-5.15 (m, 1H), 5.34 (t, J = 5.4
Hz, 1H), 6.67 (d, J = 15.2 Hz, 1H), 7.63 (d, J = 15.2 Hz, 1H), 8.16 (broad s, 1H); 13
C NMR: δ
19.5, 22.1, 23.5, 26.5, 26.9, 27.2, 27.4, 27.7, 28.2, 28.4, 28.7, 34.6, 72.7, 78.8, 122.8, 135.7,
165.3, 171.8, 177.1, 196.0. Anal. Calcd. for C20H30O7: C, 62.81; H, 7.91%. Found: C, 63.18; H,
8.03%.
(S)-12-tert-Butyldiphenylsilyloxytridec-1-ene (S)-69.
Silylation (S)-67 (4.24 g, 21.41 mmol) with TBDPSCl (7.06 g, 25.70 mmol), imidazole (2.18 g,
32.12 mmol) and DMAP (catalytic) in CH2Cl2 (40 mL) followed by usual work-up and
purification by column chromatography (silica gel, 0-5% EtOAc/hexane) afforded pure (S)-69
(8.54 g, 91%). colorless oil; [α]D23
-16.1 (c 1.02, CHCl3); IR: 997, 909 cm-1
; 1H NMR: δ 1.07
(merged s and d, J = 6.0 Hz, 12H), 1.22-1.65 (m, 16H), 2.01-2.09 (m, 2H), 3.78-3.90 (m, 1H),
4.90-5.10 (m, 2H), 5.74-5.94 (m, 1H), 7.38-7.48 (m, 6H), 7.66-7.74 (m, 4H); 13
C NMR: δ 19.3,
23.2, 25.2, 27.0, 28.9, 29.0, 29.5, 29.6, 33.8, 39.4, 69.6, 114.1, 127.4, 129.3, 134.6, 135.0, 135.9,
139.2. Anal. Calcd. for C29H44OSi: C, 79.75; H, 10.15%. Found: C, 79.36; H, 10.18%.
(S)-11-tert-Butyldiphenylsilyloxydodecanal (S)-71.
Ozone was bubbled through a cooled (-78 oC) solution of (S)-69 (2.23 g, 5.11 mmol) in MeOH
(20 mL) for 1 h. After 0.5 h, the excess O3 was removed by purging with N2, Ph3P (2.01 g, 7.67
mmol) added, the mixture stirred for 12 h at room temperature and concentrated in vacuo. The
residue was taken in hexane (10 mL), filtered, the filtrate concentrated in vacuo, and the product
119
purified by column chromatography (silica gel, 0-15% EtOAc/hexane) to obtain pure (S)-71
(1.99 g, 89%). colorless oil; [α]D24
-14.7 (c 1.02, CHCl3); IR: 2710, 1717 cm-1
; 1H NMR: δ 1.04
(merged s and d, J = 5.2 Hz, 12H), 1.17-1.25 (m, 12H), 1.59-1.64 (m, 4H), 2.39 (dt, J = 1.7, 7.3
Hz, 2H), 3.79-3.83 (m, 1H), 7.30-7.41 (m, 6H), 7.64-7.69 (m, 4H), 9.76 (t, J = 1.8 Hz, 1H); 13
C
NMR: δ 19.1, 21.9, 23.1, 25.1, 26.9, 29.0, 29.1, 29.2, 29.3, 29.4, 39.3, 43.7, 69.4, 127.3, 129.3,
134.5, 134.8, 135.7, 202.5. Anal. Calcd. for C28H42O2Si: C, 76.66; H, 9.65%. Found: C, 76.78;
H, 9.69%.
(4S,14S)-14-(tert)-Butyldiphenylsilyloxypentadec-1-en-4-ol 85.
To a stirred solution of InCl3 (0.197 g, 0.89 mmol) [azeotropically dried with dry THF] in
CH2Cl2 (10 mL) was added (R)-BINOL (0.282 g, 0.98 mmol) followed by molecular sieves 4Å
(0.012 g). After 2 h, allylBu3Sn (2.8 mL, 8.94 mmol) was added to this mixture, stirred for 10
min, cooled to -78 °C and (S)-71 (1.96 g, 4.47 mmol) in CH2Cl2 (10 mL) was added. After
stirring for 4 h at -78 °C and for 8 h at room temperature the mixture was treated with aqueous
saturated NaHCO3 and extracted with CHCl3 (3 × 10 mL). The organic layer was washed with
H2O (2 × 10 mL) and brine (1 × 5 mL), and concentrated in vacuo to get a residue,
which on column chromatography (silica gel, 0-10% EtOAc/hexane) furnished pure 85 (1.9 g,
89%). colourless oil; [α]D27
-15.7 (c 1.12, CHCl3); IR: 3389, 997, 913 cm-1
; 1H NMR: δ 1.02
(merged s and d, J = 5.4 Hz, 12H), 1.17-1.58 (m, 19H), 2.16-2.27 (m, 2H), 3.55-3.62 (m, 1H),
3.77-3.83 (m, 1H), 5.09-5.16 (m, 2H), 5.76-5.96 (m, 1H), 7.32-7.41 (m, 6H), 7.63-7.69 (m,
4H); 13
C NMR: δ 13.5, 17.4, 19.1, 23.1, 25.1, 25.5, 26.7, 26.9, 27.7, 29.5, 36.7, 39.3, 41.8,
69.5, 70.6, 117.8, 127.3, 129.2, 134.5, 134.8, 135.7. Anal. Calcd. for C31H48O2Si: C, 77.44;
120
H, 10.06%. Found: C, 77.51; H, 10.21%.
(4S,14S)-14-(tert)-Butyldiphenylsilyloxy-4-tetrahydropyranyloxypentadec-1-ene 86.
Pyranylation of 85 (1.43 g, 2.98 mmol) with DHP (0.540 mL, 5.96 mmol) and PPTS (catalytic)
in CH2Cl2 (20 mL) followed by work-up and column chromatography (silica gel, 0-5%
EtOAc/hexane) afforded pure 86 (1.5 g, 90%). colorless oil; [α]D25
-15.2 (c 1.05, CHCl3); IR:
997, 911, 869 cm-1
; 1
H NMR: δ 1.04 (merged s and d, J = 5.4 Hz, 12H), 1.17-1.47 (m, 14H),
1.50-1.74 (m, 10H), 2.25-2.33 (m, 2H), 3.44-3.52 (m, 1H), 3.61-3.65 (m, 1H), 3.80-3.93 (m,
2H), 4.64-4.70 (m, 1H), 5.00-5.10 (m, 2H), 5.72-5.93 (m, 1H), 7.33-7.40 (m, 6H), 7.64-7.68 (m,
4H); 13
C NMR: δ 19.2, 19.7, 23.2, 25.0, 25.1, 25.5, 27.0, 29.5, 29.7, 30.9, 31.1, 33.3, 34.7,
37.9, 39.4, 39.7, 62.3, 69.5, 75.2, 76.6, 96.7, 97.9, 116.4, 116.8, 127.3, 129.3, 134.5, 134.7,
134.8, 135.4, 135.8. Anal. Calcd. for C36H56O3Si: C, 76.54; H, 9.99%. Found: C, 77.29; H,
9.71%.
(2S,12S)-12-Tetrahydropyranyloxypentadec-1-en-2-ol 87.
Desilylation of 86 (1.52 g, 2.66 mmol) with Bu4NF (5.3 mL, 5.31 mmol, 1 M in THF) in
THF (10 mL) followed by work-up and column chromatography (silica gel, 0-30%
EtOAc/hexane) gave 87 (0.810 g, 92%). colorless oil; [α]D24
-2.8 (c 1.09, CHCl3); IR: 3367,
1006, 927 cm-1
; 1H NMR: δ 1.15 (d, J = 6.2 Hz, 3H), 1.18-1.32 (m, 12H), 1.38-1.88 (m, 13H),
2.19-2.34 (m, 2H), 3.42-3.48 (m, 1H), 3.62-3.93 (m, 3H), 4.63-4.67 (m, 1H), 5.03-5.08 (m,
2H), 5.66-5.92 (m, 1H); 13
C NMR: δ 19.7, 23.3, 25.0, 25.5, 25.7, 29.5, 29.6, 29.7, 30.9, 31.1,
121
33.3, 34.7, 38.0, 39.3, 39.7, 62.4, 67.9, 75.5, 76.7, 96.8, 97.9, 116.3, 116.7, 134.8, 135.5. Anal.
Calcd. for C20H38O3: C, 73.57; H, 11.73%. Found: C, 73.22; H, 11.70%.
(2R,12S)-2-Acryloxy-12-tetrahydropyranyloxypentadec-1-ene 88.
To a cooled (0 °C) and stirred solution of 87 (0.610 g, 1.87 mmol), PPh3 (0.735 g, 2.81 mmol)
and acrylic acid (0.270 g, 3.74 mmol) in THF (15 mL) was dropwise added DIAD (0.55 mL,
2.81 mmol). After stirring the mixture for 12 h at room temperature, it was poured into ice-cold
water (20 mL), the organic layer separated and the aqueous portion extracted with EtOAc
(3 × 10 mL). The combined organic extracts were washed with H2O (2 × 10 mL) and brine (1 ×
5 mL), and dried. Solvent removal in vacuo followed by column chromatography (silica gel, 0-
30% EtOAc/hexane) of the residue gave pure 88 (0.500 g, 71%). colorless oil; [α]D25
-10.2 (c
1.08, CHCl3); IR: 1722, 987 cm-1
; 1H NMR: δ 1.22-1.40 (m containing a d at δ 1 .23, J = 6.5
Hz, 15H), 1.43-1.76 (m, 12H), 2.24-2.36 (m, 2H), 3.46-3.50 (m, 1H), 3.57-3.68 (m, 1H), 3.87-
3.94 (m, 1H), 4.65-4.69 (m, 1H), 4.94-5.10 (m, 3H), 5.75-5.85 (m, 2H), 5.97-6.03 (m, 1H), 6.37
(dd, J = 1.7, 17.2 Hz, 1H); 13
C NMR: δ 20.0, 20.1, 25.2, 25.5, 25.7, 25.8, 29.6, 29.7, 29.9,
31.1, 31.2, 33.5, 34.9, 36.1, 38.1, 39.9, 62.7, 71.4, 75.5, 76.8, 97.0, 98.2, 116.7, 117.1, 129.3,
130.3, 135.0, 135.7, 166.1. Anal. Calcd. for C23H40O4: C, 72.59; H, 10.59%. Found: C,
72.71; H, 10.72%.
(6S,16R,3E)-16-Methyl-6-(tetrahydropyranyloxy)-1-oxacyclohexadec-3-ene-2-one 89.
122
A mixture of 88 (0.210 g, 0.55 mmol) and Grubbs’ II catalyst (10 mol%) in CH2Cl2 (50 mL) was
refluxed for 8 h. The reaction mixture was concentrated in vacuo and the residue subjected to
column chromatography (silica gel, 0-25% EtOAc/hexane) to afford pure 89 (0.147 g, 75%).
colorless oil; [α]D26
-23.0 (c 1.14, CHCl3); IR: 1712, 887 cm-1
; 1H NMR: δ 1.22-1.50 (m, 19H),
1.56-1.86 (m, 8H), 2.30-2.39, 2.42-2.53 and 2.63-2.69 (three m, 2H), 3.45-3.51 (m, 1H), 3.68-
3.90 (m, 2H), 4.61-4.70 (m, 1H), 4.95-5.21 (m, 1H), 5.84 (broad d, J = 15.6 Hz, 1H), 6.80-6.96
(m, 1H); 13
C NMR: δ 19.4, 19.7, 20.0, 20.3, 22.6, 22.8, 23.3, 23.6, 25.4, 26.3, 26.8, 27.2, 27.4,
27.5, 27.8, 29.6, 30.9, 31.0, 31.3, 32.0, 34.6, 34.8, 37.9, 62.2, 62.6, 70.6, 72.9, 75.7, 95.5,
98.8, 124.4, 144.3, 144.8, 165.6, 165.8. Anal. Calcd. for C21H36O4: C, 71.55; H, 10.29%. Found:
C, 71.47; H, 10.12%.
(6S,16R,3E)-16-Methyl-6-(tetrahydropyranyloxy)-1-oxacyclohexadec-3-ene-2,5-dione 84.
A mixture of 89 (0.100 g, 0.28 mmol) and SeO2 (0.048 g, 0.43 mmol) in 1,4-dioxane (10 mL)
was refluxed for 24 h. After bringing to room temperature, the mixture was filtered, the filtrate
concentrated in vacuo, and the residue subjected to column chromatography (silica gel, 0-25%
EtOAc/hexane) to obtain pure 84 (0.065 g, 63%). Its optical and spectral (1H and
13C NMR)
data were identical with that of the sample, prepared earlier. Anal. Calcd. for C21H34O5: C, 68.82;
H, 9.35%. Found: C, 68.64; H, 9.49%.
123
(±±±±)-6-Methyl-5-hepten-2-ol 123.
OH
To a cooled (0 oC) and stirred suspension of LiAlH4 (2.11 g, 55.56 mmol) in Et2O (30 mL) was
dropwise added 122 (10.00 g, 79.37 mmol) in Et2O (70 mL). After stirring for 2 h, the mixture
was treated with aqueous saturated Na2SO4, diluted with Et2O, and the supernatant filtered. The
filtrate was carefully concentrated, and the residue distilled to obtain pure 123 (9.2 g, 91%).
colorless oil; bp: 90 oC/20 mm; IR: 3373, 1642 cm
-1;
1H NMR: δ 1.14 (d, J = 6.2 Hz, 3H), 1.48-
1.59 (m, 2H), 1.65 (s, 3H), 1.71 (s, 3H), 2.00-2.15 (m, 3H), 3.74-3.90 (m, 1H), 5.11-5.19 (m,
1H); 13
C NMR: δ 17.5, 23.3, 24.4, 25.6, 39.1, 67.7, 124.0, 131.8.
(R)-6-Acetoxy-2-methyl-2-heptene 124. A mixture of (±)-123 (7.50 g, 58.59 mmol), vinyl
acetate (8.1 mL, 87.89 mmol) and Novozym 435® (0.75 g, ~12 mg/mmol) in hexane (30.0 mL)
was agitated on an orbital shaker at 110 rpm for 50 min. The reaction mixture was filtered, and
the solution concentrated in vacuo to get a residue which on column chromatography (silica gel,
0-10% EtOAc/hexane) gave pure (S)-123 (3.1 g, 41%) and (R)-124 (4.4 g, 44%).
(S)-123:
OH
colorless oil; [α]D24
+10.9 (c 1.30, CHCl3) (lit.73b
[α]D25
+10.5 (c 0.4, CHCl3)); IR: 3437 cm-1
; 1H
NMR: δ 1.19 (d, J = 6.0 Hz, 3H), 1.41-1.57 (m, 2H), 1.62 (s, 3H), 1.69 (s, 3H), 1.93 (broad s,
1H), 2.00-2.14 (m, 2H), 3.80 (sextet, J = 6.0 Hz, 1H), 5.12-5.22 (m, 1H); 13
C NMR: δ 17.7, 23.4,
124
24.5, 25.7, 39.2, 67.9, 124.1, 132.0. Anal Calcd. for C8H16O: C, 74.94; H, 12.58%; Found: C,
74.77; H, 12.68%.
(R)-124:
colorless oil; [α]D24
-6.5 (c 1.01, CHCl3), [α]D25
-6.8 (c 1.23, EtOH) (lit.73c
[α]D23
+7.7 (c 0.03,
EtOH)); IR: 1736, 1243 cm-1
; 1H NMR: δ 1.21 (d, J = 6.6 Hz, 3H), 1.43-1.57 (m, 2H), 1.59 (s,
3H), 1.68 (s, 3H), 1.97-2.04 (merged m and s at δ 2.03, 5H), 4.83-4.91 (m, 1H), 5.05-5.11 (m,
1H); 13
C NMR: δ 17.6, 21.4, 24.0, 25.7, 29.7, 36.0, 70.7, 123.5, 132.1, 170.8. Anal. Calcd. for
C10H18O2: C, 70.55; H, 10.66%; Found: C, 70.38; H, 10.36%.
(R)-6-Methyl-5-hepten-2-ol (R)-123.
OH
Reduction of (R)-124 (2.70 g, 15.88 mmol) with LiAlH4 (0.480 g, 12.70 mmol) in Et2O (60 mL)
followed by work up as above furnished pure (R)-123 (1.9 g, 92%). colorless oil; [α]D22
-11.7 (c
1.06, CHCl3); IR: 3050, 1642 cm-1
; 1H NMR: δ 1.16 (d, J = 6.0 Hz, 3H), 1.39-1.55 (m, 2H),
1.59 (s, 3H), 1.68 (s, 3H), 1.83 (broad s, 1H), 2.00-2.09 (m, 2H), 3.72-3.83 (m, 1H), 5.03-5.18
(m, 1H); 13
C NMR : δ 17.7, 23.5, 24.5, 25.8, 39.2, 67.9, 124.1, 132.0. Anal Calcd. for C8H16O: C,
74.94; H, 12.58%; Found: C, 74.77; H, 12.68%.
125
(R)-6-tert-Butyldiphenylsilyloxy-2-methyl-2-heptene (R)-125.
OTBDPS
Silylation of (R)-123 (2.50 g, 19.53 mmol) with TBDPSCl (6.98 g, 25.39 mmol), imidazole (1.73
g, 25.39 mmol) and DMAP (catalytic) in CH2Cl2 (20 mL) followed by work-up and column
chromatography (silica gel, 0-5% EtOAc/hexane) afforded pure (R)-125 (6.3 g, 88%). colorless
oil; [α]D24
+11.7 (c 1.04, CHCl3); IR: 3050, 3013 cm-1
; 1H NMR: δ 1.05 (merged s and d, J = 6.0
Hz, 12H), 1.18-1.26 (m, 2H), 1.53 (s, 3H), 1.63 (s, 3H), 1.88-2.01 (m, 2H), 3.79-3.87 (m, 1H),
4.95-5.00 (m, 1H), 7.32-7.44 (m, 6H), 7.65-7.70 (m, 4H); 13
C NMR: δ 17.6, 18.4, 19.3, 23.2,
24.0, 25.7, 26.8, 26.9, 39.6, 69.4, 124.5, 127.4, 127.5, 127.6, 129.4, 129.5, 131.2, 134.3, 134.6,
135.0, 135.6, 135.9. Anal. Calcd. for C24H34OSi: C, 78.63; H, 9.35%. Found: C, 78.68; H,
9.51%.
(S)-6-tert-Butyldiphenylsilyloxy-2-methyl-2-heptene (S)-125.
OTBDPS
As above, silylation of (S)-123 (2.20 g, 17.19 mmol) using TBDPSCl (6.12 g, 22.34 mmol),
imidazole (1.52 g, 22.34 mmol) and DMAP (catalytic) in CH2Cl2 (20 mL) furnished (S)-125 (5.7
g, 91%). colorless oil; [α]D25
-11.8 (c 1.03 , CHCl3); IR: 3071, 3049, 998 cm-1
; 1H NMR: δ 1.03
(merged s and d, J = 6.2 Hz, 12H), 1.40-1.45 (m, 1H), 1.50-1.55 (m containing a s at δ 1.54, 4H),
1.63 (s, 3H), 1.89-2.01 (m, 2H), 3.84-3.86 (m, 1H), 4.96-4.99 (m, 1H), 7.35-7.42 (m, 6H), 7.67-
7.69 (m, 4H); 13
C NMR: δ 17.7, 18.5, 19.4, 23.2, 24.1, 25.8, 26.9, 27.1, 39.7, 69.4, 124.5, 127.5,
126
127.7, 129.5, 129.6, 131.3, 134.7, 135.0, 135.6, 136.0. Anal. Calcd. for C24H34OSi: C, 78.63; H,
9.35%. Found: C, 78.31; H, 9.23%.
(R)-4-tert-Butyldiphenylsilyloxypentanal (R)-126.
Reductive ozonolysis of (R)-125 (4.84 g, 13.22 mmol) using O3 and Ph3P (5.20 g, 19.84 mmol)
in CH2Cl2 (20 mL) followed by work-up and column chromatography (silica gel, 0-10%
Et2O/hexane) gave pure (R)-126 (3.6 g, 81%). colorless oil; [α]D22
+2.2 (c 1.01, CHCl3); IR:
3070, 2717, 1726 cm-1
; 1H NMR: δ 1.06 (merged s and d, J = 6.3 Hz, 12H), 1.70-1.83 (m, 2H),
2.44-2.51 (m, 2H), 3.91-3.95 (m, 1H), 7.37-7.43 (m, 6H), 7.66-7.68 (m, 4H), 9.68 (s, 1H); 13
C
NMR: δ 19.3, 23.0, 27.0, 27.1, 31.3, 39.6, 68.5, 127.5, 127.7, 129.6, 129.7, 134.1, 134.5, 135.8,
135.9, 202.4. Anal. Calcd. for C21H28O2Si: C, 74.07; H, 8.29%. Found: C, 74.18; H, 8.51%.
(S)-4-tert-Butyldiphenylsilyloxypentanal (S)-126.
Reductive ozonolysis of (S)-125 (5.01 g, 13.69 mmol) with O3 and Ph3P (5.38 g, 20.53 mmol) in
CH2Cl2 (20 mL) followed by isolation as above furnished pure (S)-126 (3.8 g, 82%). colorless
oil; [α]D22
-1.9 (c 1.19, CHCl3); IR: 1727, 2717, 3050 cm-1
; 1H NMR: δ 1.07 (merged s and d, J =
6.1 Hz, 12H), 1.71-1.83 (m, 2H), 2.47-2.49 (m, 2H), 3.92-3.96 (m, 1H), 7.37-7.43 (m, 6H), 7.66-
7.68 (m, 4H), 9.68 (s, 1H); 13
C NMR: δ 19.3, 23.0, 27.0, 27.1, 31.3, 39.6, 68.5, 127.4, 127.5,
127.6, 127.7, 129.6, 129.7, 134.1, 134.5, 135.8, 135.9, 136.0, 202.4. Anal. Calcd. for
C21H28O2Si: C, 74.07; H, 8.29%. Found: C, 74.18; H, 8.51%.
127
(3RS,6R)-6-tert-Butyldiphenylsilyloxyhept-1-en-3-ol (3RS,6R)-127.
Reaction of (R)-126 (3.14 g, 9.24 mmol) with vinylmagnesium bromide (18.5 mL, 18.5 mmol, 1
M in THF) in THF (30 mL) at -78 oC followed by work-up and column chromatography (silica
gel, 0-10% Et2O/hexane) gave (3RS,6R)-127 (2.8 g, 84%). colorless liquid; [α]D23
+36.1 (c 1.22,
CHCl3); IR: 3365, 3070, 3050, 1644 cm-1
; 1H NMR: δ 1.04 (merged s and d, J = 6.2 Hz, 12H),
1.45-1.69 (m, 5H), 3.85-3.87 (m, 1H), 3.98-4.00 (m, 1H), 5.01-5.20 (m, 2H), 5.69-5.86 (m, 1H),
7.30-7.40 (m, 6H), 7.63-7.68 (m, 4H); 13
C NMR: δ 19.3, 23.1, 27.1, 29.7, 32.3, 32.6, 34.7, 35.1,
69.3, 69.5, 73.0, 73.2, 114.5, 127.5, 127.6, 129.5, 129.6, 134.4, 134.7, 135.0, 136.4, 141.2. Anal.
Calcd. for C23H32O2Si: C, 74.95; H, 8.75%. Found: C, 74.78; H, 8.84%.
(3RS,6S)-6-tert-Butyldiphenylsilyloxyhept-1-en-3-ol (3RS,6S)-127.
As above, reaction of (S)-126 (2.30 g, 6.76 mmol) with vinylmagnesium bromide (13.6 mL, 13.6
mmol, 1 M in THF) in THF (20 mL) and usual purification afforded pure (3RS,6S)-127 (2.1 g,
84%). colorless liquid; [α]D24
-12.1 (c 1.16, CHCl3); IR: 3364, 3071, 997 cm-1
; 1H NMR: δ 1.04
(merged s and d, J = 6.2 Hz, 12H), 1.45-1.62 (m containing a s at 1.58, 5H), 3.85-3.87 (m, 1H),
3.96-4.02 (m, 1H), 5.01-5.20 (m, 2H), 5.69-5.86 (m, 1H), 7.33-7.40 (m, 6H), 7.63-7.67 (m, 4H);
13C NMR: δ 19.2, 23.0, 27.0, 32.2, 32.5, 34.6, 35.0, 69.3, 69.4, 73.0, 73.2, 114.5, 127.4, 127.5,
129.4, 129.5, 135.9, 141.1. Anal. Calcd. for C23H32O2Si: C, 74.95; H, 8.75%. Found: C, 75.18;
H, 8.51%.
128
(3S,6R)-3-Acetoxy-6-tert-butyldiphenylsilyloxyhept-1-ene (3S,6R)-128. Acetylation of
(3RS,6R)-127 (4.16 g, 11.30 mmol) with vinyl acetate (5.0 mL) and Novozym 435® (0.50 g, ~50
mg/mmol) was carried out as described above to obtain pure (3R,6R)-127 (2.0 g, 48%) and
(3S,6R)-128 (2.1 g, 46%).
(3R,6R)-127:
colorless oil; [α]D26
+10.4 (c 1.14, CHCl3); 1H NMR: δ 1.06 (merged s and d, J = 6.0 Hz, 12H),
1.47-1.55 (m, 5H), 3.88-3.91 (m, 1H), 3.98-4.00 (m, 1H), 5.01-5.18 (m, 2H), 5.76-5.82 (m, 1H),
7.35-7.43 (m, 6H), 7.67-7.69 (m, 4H); 13
C NMR: δ 19.2, 23.0, 27.0, 32.6, 35.1, 69.4, 73.2, 114.5,
127.4, 127.5, 129.5, 129.6, 134.3, 134.6, 135.9, 141.1. Anal. Calcd. for C23H32O2Si: C, 74.95; H,
8.75%. Found: C,75.15; H, 8.92%.
(3S,6R)-128:
colorless oil; [α]D26
+13.1 (c 1.03, CHCl3); IR: 3070, 1739, 1647 cm-1
; 1H NMR: δ 1.04 (merged
s and d, J = 7.2 Hz, 12H), 1.35-1.52 (m, 2H), 1.54-1.70 (m, 2H), 2.01 (s, 3H), 3.81-3.90 (m, 1H),
5.09-5.20 (m, 3H), 5.61-5.78 (m, 1H), 7.31-7.42 (m, 6H), 7.63-7.68 (m, 4H); 13
C NMR: δ 19.3,
21.2, 23.1, 27.0, 27.1, 29.6, 34.5, 69.0, 74.7, 116.6, 127.5, 129.5, 129.6, 134.4, 134.7, 135.8,
135.9, 136.0, 136.5, 170.3. Anal. Calcd. for C25H34O3Si: C, 73.13; H, 8.35%. Found: C,73.15; H,
8.32%.
(3S,6S)-3-Acetoxy-6-tert-butyldiphenylsilyloxyhept-1-ene (3S,6S)-128. Following the same
procedure as above, (3RS,6S)-127 (1.90 g, 5.16 mmol) was acetylated in vinyl acetate (5.0 mL)
129
using Novozym 435® (0.25 g, ~50 mg/mmol) to obtain pure (3R,6S)-127 (0.860 g, 45%) and
(3S,6S)-128 (1.0 g, 47%).
(3R,6S)-127:
colorless oil; [α]D25
-17.7 (c 1.24 , CHCl3); IR: 3360, 3065, 998 cm-1
; 1
H NMR: δ 1.02 (merged s
and d, J = 6.0 Hz, 12 H), 1.45-1.59 (m, 5H), 3.84-3.93 (m, 1H), 3.96-4.02 (m, 1H), 5.04-5.21 (m,
2H), 5.71-5.87 (m, 1H), 7.30-7.41 (m, 6H), 7.64-7.68 (m, 4H); 13
C NMR: δ 19.2, 23.0, 27.0,
32.3, 34.6, 69.3, 73.0, 114.6, 127.4, 127.5, 129.5, 134.4, 134.7, 135.9, 141.1. Anal. Calcd. for
C23H32O2Si: C, 74.95; H, 8.75%. Found: C, 75.18; H, 8.51%.
(3S,6S)-128:
colorless oil; [α]D24
-13.5 (c 1.05, CHCl3); IR: 1736, 1231 cm-1
; 1H NMR: δ 1.04 (merged s and
d, J = 6.0 Hz, 12H), 1.35-1.50 (m, 2H), 1.52-1.68 (m, 2H), 2.02 (s, 3H), 3.79-3.88 (m, 1H), 5.10-
5.20 (m, 3H), 5.60-5.77 (m, 1H), 7.32-7.42 (m, 6H), 7.63-7.69 (m, 4H); 13
C NMR: δ 19.2, 21.2,
23.1, 27.0, 29.7, 34.5, 69.1, 74.8, 116.6, 127.4, 127.5, 129.4, 129.5, 134.3, 134.7, 135.8, 136.4,
170.3. Anal. Calcd. for C25H34O3Si: C, 73.13; H, 8.35%. Found: C, 73.32; H, 8.04%.
(2S)-6-para-Methoxybenzyloxy-2-methylhept-2-ene 129.
OPMB
130
To a cooled (-5 oC) and stirred suspension of hexane-washed NaH (4.52 g, 94.14 mmol, 50%
suspension in oil) in DMF (10 mL) was added (S)-123 (4.82 g, 37.66 mmol) in DMF (10 mL).
After 1 h, PMBCl (6.13 mL, 45.19 mmol) was dropwise added into the mixture and stirring
continued till completion of the reaction (cf. TLC). After addition of H2O (20 mL), the mixture
was extracted with Et2O (3 × 15 mL). The combined organic extracts were washed with H2O (2
× 10 mL) and brine (1 × 5 mL), dried and concentrated in vacuo to get a residue which on
column chromatography (silica gel, 0-5% Et2O/hexane) afforded pure (S)-129 (7.6 g, 82%).
colorless liquid; [α]D23
+29.9 (c 1.08, CHCl3); IR: 3090, 1613 cm-1
; 1H NMR: δ 1.18 (d, J = 7.0
Hz, 3H), 1.43-1.44 (m, 2H), 1.60 (s, 3H), 1.68 (s, 3H), 2.04-2.06 (m, 2H), 3.47-3.50 (m, 1H),
3.79 (s, 3H), 4.38 (d, J = 14.0 Hz, 1H), 4.49 (d, J = 14.0 Hz, 1H), 5.09 (t, J = 2.4 Hz, 1H), 6.86
(d, J = 7.0 Hz, 2H), 7.26 (d, J = 7.0 Hz, 2H); 13
C NMR: δ 17.6, 19.6, 24.1, 25.7, 36.7, 55.2, 69.9,
74.1, 113.7, 124.3, 129.1, 131.2, 131.5, 159.0. Anal. Calcd. for C16H24O2: C, 77.38; H, 9.74%.
Found: C, 77.33; H, 9.61%.
(4S)-4-para-Methoxybenzyloxypentanal 130.
Dihydroxylation of (S)-129 (4.46 g, 17.98 mmol) in acetone : water (8:1, 30 mL) with NMO
(4.20 g, 35.96 mmol) and OsO4 (0.230 g, 0.89 mmol) in t-BuOH (2 mL), followed by work-up
and column chromatography (0-30% EtOAc/hexane) furnished the corresponding 1,2-diol (4.8 g,
95%). colorless oil. [α]D24
+29.2 (c 1.03, CHCl3); IR: 3418, 1341, 1138 cm-1
; 1H NMR: δ 1.12-
1.26 (merged s and d, J = 6.4 Hz, 9H), 1.56-1.81 (m, 4H), 2.56 (broad s, 2H), 3.34 (t, J = 7.4 Hz,
1H), 3.45-3.61 (m, 1H), 3.78 (s, 3H), 4.37 (d, J = 11.4 Hz, 1H), 4.54 (d, J = 11.4 Hz, 1H), 6.87
(d, J = 8.7 Hz, 2H), 7.26 (d, J = 8.7 Hz, 2H); 13
C NMR: 19.4, 19.5, 23.3, 23.4, 26.4, 26.5, 27.5,
131
27.6, 33.7, 33.8, 55.3, 70.1, 72.9, 73.0, 74.5, 74.7, 78.4, 113.8, 129.4, 129.5, 130.5, 130.7, 159.2.
Anal. Calcd. for C16H26O4: C, 68.06; H, 9.28%. Found: C, 67.88; H, 9.61%.
The above diol (4.08 g, 14.47 mmol) was cleaved with NaIO4 (6.19 g, 28.92 mmol) in in
aqueous 60% CH3CN (20 mL). Usual work-up and column chromatography (silica gel, 0-10%
EtOAc/hexane) furnished pure (S)-130 (3.2 g, quant.). colorless liquid; [α]D24
+45.5 (c 1.03,
CHCl3); IR: 2724, 1723 cm-1
; 1H NMR: δ 1.20 (d, J = 6.0 Hz, 3H), 1.79-1.86 (m, 2H), 2.46-2.54
(m, 2H), 3.50-3.56 (m, 1H), 3.80 (s, 3H), 4.36 (d, J = 11.4 Hz, 1H), 4.55 (d, J = 11.4 Hz, 1H),
6.88 (d, J = 8.4 Hz, 2H), 7.28 (d, J = 8.4 Hz, 2H), 9.74 (t, J = 1.5 Hz, 1H); 13
C NMR: δ 19.6,
29.3, 40.3, 55.4, 70.2, 73.5, 113.9, 129.4, 130.7, 159.2, 202.7. Anal. Calcd. for C13H18O3: C,
70.24; H, 8.16%. Found: C, 70.05; H, 8.08%.
(3RS,6S)-6-para-Methoxybenzyloxyhept-1-en-3-ol 131.
As described earlier, reaction of (S)-130 (2.28 g, 10.27 mmol) with vinylmagnesium bromide
(15.40 mL, 15.40 mmol, 1M in THF) (30 mL) followed by usual isolation and purification
furnished (3RS,6S)-131 (1.9 g, 73%). colorless liquid; [α]D24
+16.3 (c 1.02, CHCl3); IR: 3410
cm-1
; 1H NMR: δ 1.15 (d, J = 6.3 Hz, 3H), 1.47-1.66 (m, 4H), 2.50 (broad s, 1H), 3.44-3.52 (m,
1H), 3.74 (s, 3H), 3.98-4.05 (m, 1H), 4.33 (d, J = 11.4 Hz, 1H), 4.47 (d, J = 11.4 Hz, 1H), 5.01-
5.18 (m, 2H), 5.74-5.86 (m, 1H), 6.82 (d, J = 8.4 Hz, 2H), 7.22 (d, J = 8.4 Hz, 2H); 13
C NMR: δ
19.5, 32.4, 33.0, 55.3, 70.0, 72.9, 74.3, 74.5, 113.8, 114.4, 129.4, 130.8, 141.3, 159.1. Anal.
Calcd. for C15H22O3: C, 71.97; H, 8.86%. Found: C, 72.21; H, 8.88%.
(3S,6S)-3-Acetoxy-6-para-methoxybenzyloxyhept-1-ene 132. As described earlier, acetylation
of (3RS,6S)-131 (1.80 g, 7.20 mmol) with vinyl acetate (1.0 mL, 10.8 mmol) in the presence of
132
Novozym 435® (0.540 mg, ~75 mg/mmol) in diisopropyl ether (25 mL) followed by isolation
furnished (3R,6S)-131 (0.756 g, 42%) and 132 (0.946 g, 45%).
(3R,6S)-131:
colorless liquid; [α]D23
+20.7 (c 1.00, CHCl3); IR: 3410 cm-1
; 1H NMR: δ 1.19 (d, J = 6.3 Hz,
3H), 1.54-1.72 (m, 4H), 2.43 (broad s, 1H), 3.49-3.59 (m, 1H), 3.79 (s, 3H), 4.03-4.11 (m, 1H),
4.38 (d, J = 11.4 Hz, 1H), 4.52 (d, J = 11.4 Hz, 1H), 5.07-5.26 (m, 2H), 5.80-5.91 (m, 1H), 6.87
(d, J = 8.7 Hz, 2H), 7.26 (d, J = 8.7 Hz, 2H); 13
C NMR: δ 19.5, 32.4, 33.0, 55.3, 70.1, 72.9, 74.5,
113.8, 114.5, 129.4, 130.8, 141.2, 159.1. Anal. Calcd. for C15H22O3: C, 71.97; H, 8.86%. Found:
C, 72.15; H, 8.75%.
132:
colorless liquid; [α]D24
+12.4 (c 1.01, CHCl3); IR : 1736, 1646, 990 cm-1
; 1
H NMR: δ 1.18 (d, J
= 6.3 Hz, 3H), 1.39-1.80 (m, 4H), 2.03 (s, 3H), 3.46-3.56 (m, 1H), 3.80 (s, 3H), 4.36 (d, J = 11.4
Hz, 1H), 4.49 (d, J = 11.4 Hz, 1H), 5.13-5.25 (m, 3H), 5.70-5.81 (m, 1H), 6.87 (d, J = 8.4 Hz,
2H), 7.26 (d, J = 8.4 Hz, 2H); 13
C NMR: δ 19.6, 21.3, 30.1, 32.0, 55.3, 70.0, 73.9, 74.7, 113.8,
116.7, 129.2, 131.0, 136.5, 159.1, 170.4. Anal. Calcd. for C17H24O4: C, 69.84; H, 8.27%. Found:
C, 69.88; H, 8.33%.
(3S,6R)-6-tert-Butyldiphenylsilyloxyhept-1-en-3-ol (3S,6R)-127.
133
A mixture of (3S,6R)-128 (3.20 g, 7.80 mmol) and K2CO3 (1.30 g, 9.36 mmol) in MeOH (20
mL) was magnetically stirred till completion of the reaction (cf. TLC, ~6 h). After solvent
removal in vacuo, H2O (25 mL) was added to the residue followed by extraction with EtOAc (3
× 20 mL). The combined organic extracts were washed with H2O (2 × 10 mL) and brine (1 × 5
mL), dried and concentrated in vacuo to get a residue which on column chromatography (silica
gel, 0-15% EtOAc/hexane) furnished pure (3S,6R)-127 (2.7 g, 92%). colorless liquid; [α]D24
+15.0 (c 1.12, CHCl3); IR: 3420, 3050, 997 cm-1
; 1H NMR: δ 1.07 (merged s and d, J = 6.3 Hz,
12H), 1.42-1.60 (m, 5H), 3.85-3.92 (m, 1H), 3.96-4.02 (m, 1H), 5.07-5.19 (m, 2H), 5.78-5.83 (m,
1H), 7.35-7.43 (m, 6H), 7.67-7.69 (m, 4H); 13
C NMR: δ 19.3, 23.1, 27.0, 27.2, 32.3, 34.6, 69.3,
73.0, 114.6, 127.5, 127.6, 129.5, 129.6, 134.4, 134.8, 135.9, 141.2. Anal. Calcd. for C23H32O2Si:
C, 74.95; H, 8.75%. Found: C, 74.77; H, 8.43%.
Ethyl (2E,4S,7R)-4-Hydroxy-7-tert-butyldiphenylsilyloxyoct-2-enoate 133.
Cross-metathesis between (3S,6R)-127 (0.730 g, 1.98 mmol) and ethyl acrylate (1.99 g, 19.8
mmol) in the presence of Hoveyda Grubbs’ II catalyst (5 mol) in CH2Cl2 (15 mL), followed by
isolation furnished 133 (0.870 g, quant.). colorless oil; [α]D28
+28.9 (c 1.02, CHCl3); IR: 3453,
1720, 1656, 984 cm-1
; 1H NMR: δ 1.04 (merged s and d, J = 6.0 Hz, 12H), 1.29 (t, J = 7.2 Hz,
3H), 1.59-1.67 (m, 5H), 3.85-3.94 (m, 1H), 4.14-4.25 (merged m and q at δ 4.20, J = 7.2 Hz,
3H), 5.99 (dd, J = 1.6, 15.6 Hz, 1H), 6.88 (dd, J = 4.6, 15.6 Hz, 1H), 7.35-7.42 (m, 6H), 7.63-
7.68 (m, 4H); 13
C NMR: δ 14.2, 19.2, 22.9, 27.0, 31.6, 34.2, 60.4, 69.1, 70.8, 120.2, 127.4,
127.6, 129.5, 129.6, 134.0, 134.4, 135.8, 135.9, 150.1, 166.5. Anal. Calcd. for C26H36O4Si: C,
70.87; H, 8.23%. Found: C, 70.65; H, 8.36%.
134
Ethyl (2E,4S,7R)-4-tert-Butyldimethylsilyloxy-7-tert-butyldiphenylsilyloxyoct-2-enoate 134.
As described earlier, silylation of 133 (0.870 g, 1.98 mmol) with TBSCl (0.445 g, 2.97 mmol),
imidazole (0.202 g, 2.97 mmol) and DMAP (catalytic) in CH2Cl2 (15 mL) furnished 134 (1.0 g,
92%) after isolation and purification. colorless oil; [α]D22
+25.8 (c 1.04, CHCl3); IR: 3071, 3048,
1720, 1656, 997 cm-1
; 1H NMR: δ -0.04 (s, 6H), 0.85 (s, 9H), 1.01 (merged s and d, J = 6.0 Hz,
12H), 1.23-1.31 (m containg a t at δ 1.28, J = 7.0 Hz, 4H), 1.44-1.50 (m, 3H), 3.77-3.83 (m,
1H), 4.08-4.22 (merged m and q at δ 4.17, J = 7.0 Hz, 3H), 5.88 (dd, J = 1.8, 15.6 Hz, 1H), 6.82
(dd, J = 4.6, 15.6 Hz, 1H), 7.28-7.40 (m, 6H), 7.61-7.65 (m, 4H); 13
C NMR: δ 14.3, 18.1, 19.2,
23.2, 25.8, 27.0, 32.8, 34.4, 60.3, 69.2, 71.4, 119.8, 127.4, 127.5, 129.4, 129.5, 134.4, 134.8,
135.8, 135.9, 150.9, 166.7. Anal. Calcd. for C32H50O4Si2: C, 69.26; H, 9.08%. Found: C, 69.47;
H, 9.23%.
(2E,4S,7R)-4-tert-Butyldimethylsilyloxy-7-tert-butyldiphenylsilyloxyoct-2-enoic acid 135.
To a stirred solution of 134 (1.01 g, 1.82 mmol) in MeOH (20 mL) was added aqueous 20%
NaOH (8 mL). After stirring for 2 h at room temperature, the mixture was concentrated in vacuo.
The residue was acidified with aqueous 2N HCl and extracted with Et2O (3 × 30 mL). The
organic layer was washed with H2O (2 × 20 mL) and brine (1 × 10 mL). Removal of solvent in
vacuo followed by column chromatography of the residue (silica gel, 0-30% EtOAc/hexane)
afforded pure 135 (0.948 g, 99%). colorless oil; [α]D24
+27.1 (c 1.17, CHCl3); IR: 3500-2500,
1698 cm-1
; 1H NMR: δ 0.01 (s, 6H), 0.90 (s, 9H), 1.06 (merged s and d, J = 6.2 Hz, 12H), 1.27-
135
1.30 (m, 2H), 1.51-1.63 (m, 3H), 3.82-3.88 (m, 1H), 4.11-4.19 (m, 1H), 5.96 (dd, J = 1.2, 15.6
Hz, 1H), 6.98 (dd, J = 4.4, 15.6 Hz, 1H), 7.34-7.42 (m, 6H), 7.66-7.70 (m, 4H); 13
C NMR: δ
18.1, 19.2, 23.2, 25.8, 27.0, 29.7, 32.7, 34.3, 69.1, 71.2, 119.1, 127.4, 127.5, 129.4, 129.6, 134.3,
134.7, 135.8, 135.9, 153.7, 172.2. Anal. Calcd. for C30H46O4Si2: C, 68.39; H, 8.80%. Found: C,
68.04; H, 9.19%.
(3S,6S)-6-tert-Butyldiphenylsilyloxyhept-1-en-3-ol (3S,6S)-127.
Alkaline hydrolysis of (3S,6S)-128 (1.20 g, 2.93 mmol) with K2CO3 (0.490 g, 3.55 mmol) in
MeOH (15 mL) followed by usual isolation as above furnished pure (3S,6S)-127 (0.981 g, 91%).
colorless liquid; [α]D24
-10.1 (c 1.06, CHCl3); IR: 3420, 3050, 997 cm-1
; 1H NMR: δ 1.04
(merged s and d, J = 5.6 Hz, 12H), 1.50-1.61 (m, 5H), 3.84-3.98 (m, 2H), 5.00-5.19 (m, 2H),
5.69-5.85 (m, 1H), 7.31-7.40 (m, 6H), 7.62-7.68 (m, 4H); 13
C NMR: δ 19.0, 22.7, 26.8, 32.3,
34.8, 69.1, 73.0, 114.3, 127.2, 127.3, 129.2, 129.3, 134.4, 135.6, 140.9. Anal. Calcd. for
C23H32O2Si: C, 74.95; H, 8.75%. Found: C, 74.71; H, 8.83%.
(3S,6S)-3-Benzyloxy-6-tert-butyldiphenylsilyloxyhept-1-ene 136.
Benzylation of (3S,6S)-127 (0.690 g, 1.88 mmol) using hexane-washed NaH (0.14 g, 5.64 mmol,
50% suspension in oil), BnBr (0.48 g, 2.82 mmol) and Bu4NI (10 mol%) in THF (15 mL)
followed by work-up and column chromatography (silica gel, 0-5% EtOAc/hexane) afforded
pure 136 (0.835 g, 97%). colorless oil; [α]D23
-25.0 (c 1.20, CHCl3); IR: 3069, 1643 cm-1
; 1H
NMR: δ 1.03 (merged s and d, J = 6.0 Hz, 12H), 1.49-1.57 (m, 4H), 3.56-3.66 (m, 1H), 3.78-
136
3.89 (m, 1H), 4.30 (d, J = 11.8 Hz, 1H), 4.54 (d, J = 11.8 Hz, 1H), 5.06-5.19 (m, 2H), 5.55-5.73
(m, 1H), 7.25-7.29 (m, 5H), 7.32-7.43 (m, 6H), 7.63-7.68 (m, 4H); 13
C NMR: δ 19.2, 23.2, 27.0,
31.0, 35.0, 69.5, 69.9, 80.7, 117.1, 127.4, 127.6, 127.7, 128.3, 129.4, 134.4, 134.8, 135.9, 138.8,
138.9. Anal. Calcd. for C30H38O2Si: C, 78.55; H, 8.35%. Found: C, 78.37; H, 8.28%.
(2S,5S)-5-Benzyloxyhept-6-en-2-ol 137.
Desilylation of 136 (0.742 g, 1.62 mmol) with Bu4NF (3.23 mL, 3.23 mmol, 1 M in THF) in
THF (10 mL) at 0 °C, followed by isolation, as described earlier furnished 137 (0.271 g, 76%);
colorless oil; [α]D25
-20.6 (c 1.06, CHCl3); IR: 3400, 3065, 3030, 1643 cm-1
; 1H NMR: δ 1.17 (d,
J = 6.0 Hz, 3H), 1.64-1.66 (m, 5H), 3.72-3.83 (m, 2H), 4.34 (d, J = 11.8 Hz, 1H), 4.59 (d, J =
11.8 Hz, 1H), 5.17-5.26 (m, 2H), 5.67-5.84 (m, 1H), 7.25-7.32 (m, 5H); 13
C NMR: δ 23.3, 31.6,
34.9, 67.6, 70.1, 80.5, 117.3, 127.4, 127.7, 128.3, 138.3, 138.6. Anal. Calcd. for C14H20O2: C,
76.33; H, 9.15%. Found: C, 76.37; H, 9.51%.
(9E,3S,6R,11S,14R)-3-Benzyloxy-11-tert-butyldimethylsilyloxy-14-tert-
butyldiphenylsilyloxy-6-methyl-7-oxa-8-oxopenta-1,9-diene 138.
To a stirred solution of 137 (0.270 g, 1.23 mmol) in THF (10 mL) were added PPh3 (0.48 g, 1.85
mmol) and 135 (0.775 g, 1.47 mmol). The reaction mixture was cooled to 0 °C, DIAD (0.36 g,
1.85 mmol) added, and the mixture stirred for 18 h. The mixture was extracted with EtOAc (2 ×
15 mL), the organic extract washed with H2O (2 × 10 mL) and brine (1 × 5 mL), and dried. After
137
concentrating in vacuo, the residue was subjected to column chromatography (silica gel, 0-20%
EtOAc/hexane) to give pure 138 (0.592 g, 66%). colorless oil; [α]D23
+7.7 (c 1.06, CHCl3); IR:
1715, 1657, 995 cm-1
; 1H NMR: δ -0.03 (s, 6H), 0.86 (s, 9H), 1.03 (merged s and d, J = 6.0 Hz,
12H), 1.22 (d, J = 6.2 Hz, 3H), 1.46-1.57 (m, 8H), 3.72-3.85 (m, 2H), 4.12-4.14 (m, 1H), 4.33 (d,
J = 11.8 Hz, 1H), 4.58 (d, J = 11.8 Hz, 1H), 4.93-4.97 (m, 1H), 5.16-5.25 (m, 2H), 5.63-5.77 (m,
1H), 5.86 (dd, J = 1.6, 15.6 Hz, 1H), 6.80 (dd, J = 4.6, 15.6 Hz, 1H), 7.31-7.37 (m, 11H), 7.63-
7.67 (m, 4H); 13
C NMR: δ 18.0, 19.1, 19.9, 23.2, 25.8, 27.0, 31.1, 31.5, 32.8, 34.4, 69.1, 70.0,
70.4, 71.3, 79.9, 117.3, 120.1, 127.3, 127.4, 127.6, 128.2, 129.3, 129.4, 134.2, 134.6, 135.7,
138.5, 138.7, 150.5, 166.1. Anal. Calcd. for C44H64O5Si2: C, 72.48; H, 8.85%. Found: C, 72.52;
H, 8.70%.
(6E,2R,5S,10R,13S)-13-Benzyloxy-10-methyl-9-oxa-8-oxopenta-6,14-diene-2,5-diol 139.
A mixture of 138 (0.583 g, 0.80 mmol) in CH3CN (10 mL) and aqueous HF (0.4 ml) in a teflon
vessel was stirred at room temperature for 16 h. The mixture was concentrated in vacuo, and the
residue extracted with EtOAc (3 × 20 mL). The organic layer was washed with H2O (2 × 10 mL)
and brine (1 × 5 mL), concentrated in vacuo, and the residue column chromatographed (silica
gel, 0-40% EtOAc/hexane) to afford pure 139 (0.210 g, 70%). colorless oil; [α]D23
-24.0 (c 1.05,
CHCl3); IR: 3417, 3087, 3030, 1714, 990 cm-1
; 1H NMR: δ 1.17 (d, J = 6.0 Hz, 3H), 1.20 (d, J =
6.0 Hz, 3H), 1.49-1.75 (m, 8H), 3.14 (broad s, 2H), 3.70-3.82 (m, 2H), 4.29-4.35 (merged m and
d, J = 11.8 Hz, 2H), 4.57 (d, J = 11.8 Hz, 1H), 4.92-4.96 (m, 1H), 5.16-5.25 (m, 2H), 5.62-5.79
(m, 1H), 5.99 (dd, J = 1.4, 15.6 Hz, 1H), 6.89 (dd, J = 4.8, 15.6 Hz, 1H), 7.26-7.33 (m, 5H); 13
C
138
NMR: δ 19.9, 23.6, 31.1, 31.6, 33.2, 35.1, 68.1, 70.0, 70.8, 71.0, 80.0, 117.5, 120.4, 127.4,
127.7, 128.3, 138.5, 138.6, 150.0, 166.3. Anal. Calcd. for C22H32O5: C, 70.18; H, 8.57%. Found:
C, 69.84; H, 8.53%.
(6E,2R,5S,10R,13S)-2-Acryloxy-13-benzyloxy-10-methyl-9-oxa-8-oxopenta-6,14-dien-5-ol
140.
A solution of 139 (0.210 g, 0.56 mmol), ethyl acrylate (0.450 g, 4.48 mmol) and Novozym 435®
(0.50 g, ~890 mg/mmol) in diisopropyl ether (5 mL) was agitated on an orbital shaker at 120 rpm
for 30 h. The reaction mixture was filtered, the filtrate concentrated in vacuo, and the residue
column chromatographed (silica gel, 0-25% EtOAc/hexane) to furnish pure 140 (0.171 g, 71%).
colorless oil; [α]D23
-7.1 (c 1.13, CHCl3); IR: 3479, 3065, 1728, 1714, 1657, 985 cm-1
; 1H NMR:
δ 1.22 (d, J = 6.2 Hz, 3H), 1.25 (d, J = 6.4 Hz, 3H), 1.54-1.80 (m, 8H), 3.51 (broad s, 1H), 3.68-
3.79 (m, 1H), 4.29-4.35 (merged m and d, J = 11.8 Hz, 2H), 4.58 (d, J = 11.8 Hz, 1H), 4.88-5.06
(m, 2H), 5.16-5.25 (m, 2H), 5.66-5.83 (m, 2H), 5.95-6.15 (m, 2H), 6.38 (dd, J = 1.6, 17.2 Hz,
1H), 6.88 (dd, J = 5.0, 15.8 Hz, 1H), 7.29-7.33 (m, 5H); 13
C NMR: δ 20.0, 31.1, 31.4, 31.6, 32.0,
70.0, 70.5, 70.7, 70.9, 80.0, 117.5, 120.8, 127.4, 127.7, 128.3, 128.7, 130.6, 138.5, 138.6, 149.5,
165.9, 166.0. Anal. Calcd. for C25H34O6: C, 69.74; H, 7.96%. Found: C, 69.44; H, 7.94%.
(5S,8R,13S,16R)-Pyrenophorol monobenzyl ether 141.
139
A stirred solution of 140 (0.142 g, 0.33 mmol) and Grubbs’ II catalyst (20 mol%) in degassed
CH2Cl2 (10 mL) was refluxed for 72 h. The reaction mixture was concentrated in vacuo, and the
residue subjected to preparative thin layer chromatography (TLC) to obtain pure 141 (57 mg,
61% based on conversion) and recovered 140 (40 mg). colorless oil; [α]D25
-39.0 (c 1.07, CHCl3);
IR: 3470, 1713, 1643 cm-1
; 1H NMR: δ 1.24 (t, J = 6.2 Hz, 6H), 1.60-1.86 (m, 9H), 3.78-3.88
(m, 1H), 4.13-4.22 (m, 1H), 4.37 (d, J = 12.0 Hz, 1H), 4.55 (d, J = 12.0 Hz, 1H), 5.03-5.17 (m,
2H), 5.91 (d, J = 16.0 Hz, 2H), 6.74 (dd, J = 7.8, 16.0 Hz, 1H), 6.82 (dd, J = 6.8, 15.6 Hz, 1H),
7.32 (s, 5H); 13
C NMR: δ 13.9, 18.4, 29.7, 30.9, 33.4, 43.7, 69.8, 70.7, 77.2, 79.2, 83.4, 124.5,
127.7, 128.6, 146.9, 178.1. Anal. Calcd. for C23H30O6: C, 68.64; H, 7.51%. Found: C, 68.56; H,
7.78%.
(5S,8R,13S,16R)-Pyrenophorol (-)-VI.
A mixture of 141 (40 mg, 0.1 mmol) and TiCl4 (11.0 µL, 0.1 mmol) in CH2Cl2 (5 mL) was
stirred at room temperature till the completion of the reaction (cf. TLC, 30 min). After
concentration in vacuo, the residue was purified by preparative TLC to get pure
(5S,8R,13S,16R)-VI (23 mg, 74%). sticky solid; [α]D25
-2.9 (c 1.00, acetone), (lit.70f
[α]D25
-3.2 (c
0.25, acetone); IR: 3440, 1714, 1651, 985 cm-1
; 1H NMR: δ 1.26 (d, J = 6.6 Hz, 6H), 1.64-1.93
(m, 8H), 2.30 (broad s, 2H), 4.26-4.32 (m, 2H), 5.10-5.17 (m, 2H), 5.98 (dd, J = 1.6, 15.6 Hz,
2H), 6.90 (dd, J = 5.2, 15.6 Hz, 2H); 13
C NMR: δ 18.2, 28.9, 30.5, 69.8, 70.4, 122.2, 149.5,
165.0. Anal. Calcd. for C16H24O6: C, 61.52; H, 7.74%. Found: C, 61.45; H, 7.92%.
140
Ethyl (4R,7R)-4-Hydroxy-7-tert-butyldiphenylsilyloxyoct-2-enoate (4R,7R)-133.
The cross-metathesis between (3R,6R)-118 (1.5 g, 4.08 mmol) and ethyl acrylate (2.28 g, 22.85
mmol, 2.5 mL) in the presence of Grubbs II catalyst (5 mol%, 170 mg) in CH2Cl2 (15 mL) at 25
oC for 3 h, followed by work-up and column chromatography (silica gel, 0-15% EtOAc/hexane)
gave pure (4R,7R)-133 (1.4 g, 78%). colourless oil; [α]D23
+6.6 (c 1.04, CHCl3); IR: 3502, 1716,
981 cm-1
; 1H NMR: δ 1.05 (merged s and d, J = 6.2 Hz, 12H), 1.28 (t, J = 7.0 Hz, 3H), 1.51-1.73
(m, 4H), 2.26 (broad s, 1H), 3.89-3.92 (m, 1H), 4.19 (merged m and q, J = 7.0 Hz, 3H), 5.99 (d,
J = 15.5 Hz, 1H), 6.87 (dd, J = 5.0, 15.5 Hz, 1H), 7.32-7.45 (m, 6H), 7.63-7.69 (m, 4H); 13
C
NMR: δ 14.2, 19.2, 22.8, 27.0, 32.0, 34.9, 60.4, 69.2, 71.1, 120.2, 127.5, 127.6, 129.5, 129.6,
134.1, 134.4, 135.9, 150.1, 166.6; Anal. Calcd. for C26H36O4Si: C, 70.87, H, 8.23%. Found: C,
70.65, H, 8.36%.
Ethyl (4R,7R)-4-Tetrahydropyranyloxy-7-tert-butyldiphenylsilyloxyoct-2-enoate 142.
As described earlier, tetrahydropyranylation of (4R,7R)-133 (1.2 g, 2.73 mmol) with DHP (0.50
mL, 5.46 mmol) and PPTS (10 mol%) in CH2Cl2 (15 mL), usual work-up and column
chromatography (silica gel, 0-5% EtOAc/hexane) afforded pure 142 (1.38 g, 96%). colourless
oil; [α]D23
+22.9 (c 1.01, CHCl3); IR: 1716, 821, 756, 742 cm-1
; 1H NMR: δ 1.04 (merged s and
d, J = 6.2 Hz, 12H), 1.30 (t, J = 3.5 Hz, 3H), 1.36-1.66 (m, 6H), 1.67-1.87 (m, 4H), 3.35-3.52
(m, 1H), 3.76-3.91 (m, 2H), 4.15-4.25 (m, 2H), 4.51-4.62 (m, 1H), 4.92-4.96 (m, 1H), 5.87 and
5.99 (two d, J = 15.5 Hz, 1H), 6.71 and 6.87 (two dd, J = 6.4, 15.5 Hz, 1H), 7.33-7.41 (m, 6H),
141
7.65-7.67 (m, 4H); 13
C NMR: δ 14.2, 19.2, 19.3, 19.7, 22.2, 23.1, 23.2, 23.8, 25.3, 25.4, 26.0,
27.0, 29.0, 30.6, 34.0, 34.8, 60.2, 60.4, 62.1, 62.3, 62.7, 65.7, 68.6, 69.3, 69.4, 74.4, 74.7, 79.3,
94.6, 95.9, 97.0, 120.5, 122.1, 127.4, 129.4, 129.5, 134.4, 134.6, 134.7, 135.8, 138.0, 148.8,
166.2, 166.5. Anal. Calcd. for C31H44O5Si: C, 70.95, H, 8.45%. Found: C, 70.82, H, 8.55%.
(4R,7R)-4-Tetrahydropyranyloxy-7-tert-butyldiphenylsilyloxyoct-2-enoic acid 143.
Alkaline hydrolysis of 142 (1.1 g, 2.10 mmol) with aqueous 20% NaOH (10 mL) in MeOH (10
mL), work-up and purification by column chromatography (silica gel, 0-30% EtOAc/hexane)
afforded pure 143 (0.90 g, 87%). colourless oil; [α]D24
+20.9 (c 1.01, CHCl3); IR: 3500-2500,
1697 cm-1
; 1H NMR: δ 1.06 (merged s and d, J = 6.0 Hz, 12H), 1.44-1.75 (m, 10H), 3.42-3.52
(m, 1H), 3.67-3.90 (m, 2H), 4.20-4.32 (m, 1H), 4.51-4.68 (m, 1H), 5.89 and 6.02 (two d, J = 15.5
Hz, 1H), 6.83 and 6.98 (two dd, J = 6.0, 15.5 Hz, 1H), 7.33-7.50 (m, 6H), 7.65-7.79 (m, 4H); 13
C
NMR: δ 14.2, 19.2, 19.3, , 23.1, 23.2, 25.3, 27.0, 29.0, 30.6, 34.0, 34.8, 62.1, 62.2, 62.3, 69.3,
69.4, 119.7, 121.12, 127.4, 127.5, 129.4, 129.5, 129.6, 134.4, 134.7, 135.8, 135.9, 150.9, 151.7,
171.2, 171.5. Anal. Calcd. for C29H40O5Si: C, 70.12, H, 8.12%. Found: C, 70.36, H, 8.50%.
(4R,7R)-4-Tetrahydropyranyloxy-7-hydroxyoct-2-enoic acid 144.
Desilylation of 143 (0.70 g, 1.41 mmol) with Bu4NF (2.82 mL, 1 M in THF, 2.82 mmol) in THF
(15 mL) under refluxing conditions, work-up and purification by column chromatography (silica
gel, 0-40% EtOAc/hexane) furnished 144 (0.25 g, 69%); colourless oil; [α]D23
+22.4 (c 1.16,
CHCl3); IR: 3500-2500, 1698 cm-1
; 1H NMR: δ 1.16-1.27 (m, 5H), 1.45-1.83 (m, 8H), 3.07
142
(broad s, 1H), 3.43-3.57 (m, 1H), 3.73-3.94 (m, 2H), 4.29-4.50, 4.52-4.60 and 4.69-4.80 (three
m, 2H), 5.94 and 6.07 (two d, J = 15.8 Hz, 1H), 6.88 and 7.03 (two dd, J = 6.2, 15.8 Hz, 1H); 13
C
NMR: δ 18.8, 19.1, 23.5, 25.8, 29.8, 30.5, 32.0, 34.0, 35.0, 63.1, 63.5, 68.0, 74.0, 75.0, 77.0,
78.0, 96.8, 97.3, 121.0, 122.0, 127.7, 130.0, 135.0, 149.0, 151.0, 169.0, 170. Anal. Calcd. for
C13H22O5: C, 60.45, H, 8.58%. Found: C, 60.35, H, 8.77%.
(5R,8S,11R,16S)-5,11-Ditetrahydropyranyloxy pyrenophorol ent-104.
To a cooled (-25 °C) and stirred solution of 135 (0.15 g, 0.58 mmol) in THF (16 mL) was added
PPh3 (0.80 g, 2.91 mmol) in toluene (160 mL) followed by DIAD (0.59 g, 2.91 mmol, 0.60 mL).
After stirring for 10 h, the mixture was extracted with EtOAc (2 × 15 mL), the organic extract
washed with H2O (2 × 5 mL) and brine (1 × 5 mL), and dried. After concentrating in vacuo, the
residue was subjected to column chromatography (silica gel, 0-30% EtOAc/hexane) to give pure
ent-104 (0.07 g, 50%). colourless oil; [α]D22
+22.3 (c 1.12, CHCl3); IR: 1722 cm-1
; 1H NMR: δ
1.22-1.31 (m, 6H), 1.45-1.88 (m, 20H), 3.41-3.50 (m, 2H), 3.77-3.86 (m, 2H), 4.11-4.18 (m, 2H),
4.50-4.54 (m, 1H), 4.70-4.74 (m, 1H), 4.93-5.04 (m, 2H), 5.83-5.96 (m, 2H), 6.66-6.83 (m, 2H);
13C NMR: δ 18.1, 18.4, 18.5, 18.8, 19.3, 19.7, 21.7, 21.9, 25.3, 25.4, 27.2, 27.3, 28.7, 28.8, 28.9,
29.1, 29.3, 29.5, 29.7, 30.7, 62.3, 62.9, 69.4, 69.6, 69.8, 70.3, 72.3, 74.0, 74.1, 74.4, 76.6, 96.4,
96.6, 122.8, 122.9, 124.4, 124.7, 146.4, 146.9, 165.0, 165.6. Anal. Calcd. for C26H40O8: C, 64.98;
H, 8.39%. Found: C, 64.79; H, 8.12%.
143
(5R,8S,11R,16S)-Pyrenophorol (+)-VI.
A mixture of ent-104 (0.07 g, 0.22 mmol) and PTS (10 mol%) in MeOH (5 mL) was stirred at
room temperature for 30 min. After concentration in vacuo, the residue was extracted with
EtOAc (2 × 5 mL), the organic extract washed with H2O (2 × 4 mL) and brine (1 × 2 mL) and
dried. Removal of solvent in vacuo followed by column chromatography (silica gel, 0-40%
EtOAc/hexane) of the residue afforded pure (+)-VI (0.02 g, 44%). colourless oil; [α]D25
+2.7 (c
1.00, CHCl3); IR: 3448, 1719 cm-1
; 1H NMR: δ 1.22 (d, J = 6.6 Hz, 6H), 1.62-1.95 (m, 8H), 2.24
(broad s, 2H), 4.22-4.28 (m, 2H), 5.08-5.19 (m, 2H), 5.95 (dd, J = 1.6, 15.6 Hz, 2H), 6.93 (dd, J
= 5.2, 15.6 Hz, 2H); 13
C NMR: δ 18.3, 29.1, 30.5, 69.3, 70.8, 121.9, 148.8, 166.2. Anal. Calcd.
for C16H24O6: C, 61.52; H, 7.74%. Found: C, 61.56; H, 7.66%.
CHAPTER IVCHAPTER IVCHAPTER IVCHAPTER IV
““““BibliographyBibliographyBibliographyBibliography””””
144
References
1. (a) Ward, R. S. In: Selectivity in Organic Synthesis; 1999, Wiley; (b) Hoz A. D.
L.; Diaz-Ortiz, A.; Moreno, A. Curr. Org. Chem. 2004, 8, 903–918.
2. Clardy, J.; Walsh, C. Nature 2004, 432, 829–837.
3. (a) Eliel, E. L. In: Stereochemistry of Carbon Compounds; 1962, McGraw-Hill; (b)
Stephenson, G. R. In: Advanced Asymmetric Synthesis; 1996, Chapman and Hall.
4. (a) Chen, A. S. M. Chem. Tech. 1993, 46; (b) Tombo, R. G. M.; Bellus, D., Angew.
Chem. Intl. Ed. Engl. 1991, 30, 1193–1215; (c) Ariens, E. J. Proc. 1st Int. Pharmacol.
Meet. Vol 7, Pergamon Press, Oxford, 1963, 247; (d) Renynolds, G. P.; Elsworth, J.
D.; Blau, K.; Sandler, M.; Lees, A. J.; Stern, G. M. Br. J. Clin. Pharmacol. 1978, 6,
542–544; (e) Tessier, J.; Herve, J. J. Deltamethrine, Uclaf, R. (Ed.); 1982, 25.
5. (a) Blaschke, G. Angew. Chem. Intl. Ed. Engl. 1980, 19, 13–24; (b) Pirkle, W. H.;
Hoekstra, M. S. J. Org. Chem. 1974, 39, 3904–3906; (c) Dobashi, A.; Oka, K.; Hara,
S. J. Am. Chem. Soc. 1980, 102, 7122–7123; (d) Jaques, J.; Collet, A.; Wilen, S. H.
In: Enantiomers, Racemates, and Resolutions; 1981, 447 S, J. Wiley & Sons, Inc.,
New York.
6. (a) Hanessian, S. In: Total Synthesis of Natural Products, the "Chiron" Approach;
Pergamon Press, Elmsford. NY, 1983; (b) Crosby, J. Tetrahedron 1991, 47, 4789–
4846; (c) Blaser, H.-U. Chem. Rev. 1992, 92, 935–952.
7. (a) In: Asymmetric Synthesis (Morrison, J. D., Ed.); Academic Press: NY, 1983, Vol.
2, Chapter 2; (b) Gawley, R. E.; Aube, J. Principles of Asymmetric Synthesis, In:
Catalytic Asymmetric Synthesis, (Ojima, I., Ed.); 2013, John Wiley & Sons.
8. (a) Cahn, R. S.; Ingold, C. K.; Prelog, V. Angew. Chem. Intl. Ed. Engl. 1966, 5, 385–
415; (b) Eliel, E. L. Tetrahedron 1974, 30, 1503–1513.
145
9. (a) Knowles, W. S. Sabacky, M. J. J. Chem. Soc. Chem. Comm. 1968, 1445–1446; (b)
Katsuki, T.; Sharpless, K. B. J. Am. Chem. Soc. 1980, 102, 5974–5976; (c) Hanson,
R. M.; Sharpless, K. B. J. Org, Chem., 1986, 51, 1922–1925; (d) Kolb, H. C.; van
Nieuwenhuize, M. S.; Sharpless, K. B. Chem. Rev. 1994, 94, 2483–2547; (e) Becker,
H.; Soler, M. A.; Sharpless, K. B. Tetrahedron 1995, 51, 1345–1376; (f) Noyori, R.
Science 1990, 248, 1194–1199; (g) Otsuka, S.; Tani, K. Synthesis 1991, 665–680; (h)
Aratani, T. Pure and Appl. Chem. 1985, 57, 1839–1844, and the references cited
therein; (i) Knowles, W. S.; Sabacky, M. J.; Vineyard, B. D.; Weinkauf, D. J. J. Am.
Chem. Soc. 1975, 97, 2567–2568.
10. (a) Stinson, S. C. Chem. Eng. News 2000, 78, 55–79; (b) Dalko, P. I.; Moisan, L.
Angew. Chem. Int. Ed. 2001, 40, 3726–3748; (c) Breslow, R. Science 1982, 218, 532–
537.
11. (a) Cram, D. J.; Elhafez, A. J. Am. Chem. Soc. 1952, 74, 5828–5835; (b) Cram, D. J.;
Kopecky, K. R. J. Am. Chem. Soc. 1959, 81, 2748–2755.
12. (a) Cherest, M.; Felkin, H. Tetrahedron Lett. 1968, 9, 2205–2208; b) Anh, N. T. Top.
Curr. Chem. 1980, 88, 145–170.
13. (a) Okamoto, Y.; Ikai, T. Chem. Soc. Rev. 2008, 37, 2593–2608; (b) Stalcup, A. M.
Annu. Rev. Anal. Chem. (Palo Alto Calif.) 2010, 3, 341–363. doi:
10.1146/annurev.anchem.111808.073635; (c) Maftouh, M.; Granier-Loyaux,
C.; Chavana, E.; Marini, J.; Pradines, A.; Heyden, Y. V.; Picard, C. J. Chromatogr.
A. 2005, 1088(1-2), 67–81.
14. Wenzel, T. J. In: Discrimination of Chiral Compounds Using NMR Spectroscopy;
2007, Wiley-Interscience; (b) Dale, J. A.; Mosher, S. H. J. Am. Chem. Soc. 1973, 95,
512–519; (c) Okatani, I.; Kusumi, T.; Kashman, Y.; Kakisawa, H. J. Am. Chem. Soc.
146
1991, 113, 4092–4096; (d) Moon, L. S.; Jolly, R. S.; Kasetti, Y.; Bharatam, P. V.
Chem. Commun. 2009, 1067–1069.
15. Liese, Andreas; Seelbach, Karsten; Wandrey, Christian, (Eds.). In: Industrial
Biotransformations; 2006, p. 556, 2nd ed., John Wiley & Sons.
16. (a) Wong, C. H.; Whitesides, G. M. In: Enzymes in Synthetic Organic Chemistry;
1994, Elsevier Science; (b) Santiniello, E.; Ferraboschi, P.; Grisenti, P.; Manzocchi,
A. Chem. Rev. 1992, 92, 1071–1140.
17. Rothenberg, G. In: Catalysis: Concepts and Green Applications; 2008, Wiley-VCH
Verlag; (b) Kirby, A. J. Angew. Chem. Int. Ed. 1996, 35, 707–725.
18. (a) Gupta, M. N. (Ed.); Methods in Non-Aqueous Enzymology, 2000, Birkhäuser
Basel; (b) Klibanov, A. M. Nature 2001, 409, 241–246.
19. (a) Jones, J. B.; Beck, J. F. In: Application of Biochemical Systems in Organic
Chemistry. Part 1; (Jones, J. B.; Sih, C. J.; Perlman, D. Eds.); 1976; Vol. X, pp 236–
401, Wiley: New York; (b) Roberts, S. M.; Turner, A. J.; Willetts, A. J.; Turner, M.
K. In: Introduction to Biocatalysis Using Enzymes and Microorganisms; 1995,
Cambridge University Press: New York.
20. (a) Svedendahl, M.; Hult, K.; Berglund, P. J. Am. Chem. Soc. 2005, 127, 17988–
17989; (b) Arora, B.; Pandey, P. S.; Gupta, M. N. Tetrahedron Lett. 2014, 55, 3920–
3922; (c) Le, Z. -G.; Guo, L. -T.; Jiang, G. -F.; Yang, X. -B.; Liu, H. -Q. Green Chem.
Lett. Rev. 2013, 6, 277–281.
21. Chow, C. K. Ed. Fatty Acids in Foods and their Health Implications; 2008, Third
Edition, CRC Press, Taylor & Francis, USA.
22. Downing D. T. Rev. Pure Appl. Chem. 1961, 11, 196–211.
147
23. (a) Patel, D. K.; Archana, G.; Kumar, G. N. Curr. Microbiol. 2008, 56, 168–174; (b)
Schulz, H.; Vetterlein, D. J. Plant Nutr. Soil Sci. 2007, 170, 640–644; (c) Polgar, N.
Top Lipid Chem. 1971, 2, 207–246.
24. (a) Turner, W. B.; Aldridge, D. C. in Fungal Metabolites II; 1983, Academic Press,
London,. (b) Gardner, H. W. J. Lipid Res. 1970, 11, 311–321. (c) Kawagishi, H.;
Ando, M.; Micno, T.; Yokota, H.; Konishi, S. Agric. Biol. Chem. 1990, 54, 1329–
1331. (d) Kuga, H.; Ejima, A.; Mitui, I.; Sato, K.; Ishihara, N. Fukunda, K.; Saito, F.;
Uenaki, K. Biosci. Biotech. Biochem. 1993, 57, 1020–1021. (e) Simon, B.; Anke, T.;
Sterner, O. Phytochem. 1994, 36, 815–816.
25. (a) Kawagishi, H.; Ando, M.; Micno, T.; Yokota, H.; Konishi, S. Agric. Biol. Chem.
1990, 54, 1329–1331. (b) Kuga, H.; Ejima, A.; Mitui, I.; Sato, K.; Ishihara, N.
Fukunda, K.; Saito, F.; Uenaki, K. Biosci. Biotech. Biochem. 1993, 57, 1020-1021. (c)
Gardner, H. W. J. Lipid Res. 1970, 11, 311–321.
26. Arnone, A.; Nasini, G.; De Pava, O. V. Phytochem. 1998, 48, 507–510; (b) Simon, B.;
Anke, T.; Sterner, O. Phytochem. 1994, 36, 815–816; (c) Nagai, T.; Kiyohara, H.;
Munakata, K.; Shirahata, T.; Sunazuka, T.; Harigaya, Y.; Yamada, H. Int.
Immunopharm. 2002, 2, 1183–1193.
27. (a) Nicolaou, K. C.; Vourloumis, D.; Winssinger, N.; Baran, P. S. Angew. Chem., Int.
Ed. 2000, 39, 44–122; (b) Corey, E. J.; Guzman-Perez, A. Angew. Chem., Int. Ed.
1998, 37, 388–401; (c) Noyori, R. In: Asymmetric Catalysis in Organic Synthesis;
1994, Wiley: New York.
28. (a) Maity, B.; Chattopadhyay, S. Curr. Bioact. Comp. 2008, 4, 225-244; (b) Guha, P.;
Dey, A.; Sarkar, B.; Dhyani, M.V.; Chattopadhyay, S.; Bandyopadhyay, S. K. J. Exp.
Pharmacol. Ther. 2009, 328, 1–10; (c) Guha, P.; Dey, A.; Chatterjee, A.;
Chattopadhyay, S.; Bandyopadhyay, S. K. Brit. J. Pharmacol. 2010, 159, 726–734;
148
(d) Patro, B. S.; Maity, B.; Chattopadhyay, S. Antioxidant Redox. Signal. 2010, 12,
945-960; (e) Yadav, S. K.; Adhikary, B.; Chand, S.; Maity, B.; Bandyopadhyay, S.
K.; Chattopadhyay S. Free Radic. Biol. Med. 2012, 52, 1175–1187; (f) Maity, B.;
Yadav, S. K.; Patro, B. S.; Bandyopadhyay, S. K.; Chattopadhyay S. Free Radic.
Biol. Med. 2012, 52, 1680–1691.
29. (a) Sharma, A.; Gamre, S.; Roy, S.; Goswami, D.; Chattopadhyay, A.;
Chattopadhyay, S. Tetrahedron Lett. 2008, 49, 3902–3905; (b) Sharma, A.; Das, P.;
Chattopadhyay, S. Tetrahedron: Asymmetry 2008, 19, 2167–2170; (c) Roy, S.;
Sharma, A.; Mula, S.; Chattopadhyay, S. Chem. A Eur. J. 2009, 15, 1713–1722;
(d) Sankaranarayanan, S.; Sharma, A.; Kulkarni, B. A.; Chattopadhyay, S. J. Org.
Chem. 1995, 60, 4251–4254; (e) Sharma, A.; Sankaranarayanan, S.; Chattopadhyay,
S. J. Org. Chem. 1996, 61, 1814–1816; (f) Sharma, A.; Chattopadhyay, S. J. Org.
Chem. 1999, 64, 8059–8062; (g) Sharma, A.; Chattopadhyay, S. J. Mol. Cat. B.
Enzymatic 2000, 10, 531–534; (h) Sharma, A.; Mahato, S.; Chattopadhyay,
S. Tetrahedron Lett. 2009, 50, 4986–4988; (i) Sharma, A.; Gamre, S.; Chattopadhyay,
S. Tetrahedron: Asymmetry 2009, 20, 1164–1167; (j) Ghadigaonkar, S.; Koli, M. R.;
Gamre, S. S.; Choudhary, M. K.; Chattopadhyay, S.; Sharma, A. Tetrahedron:
Asymmetry 2012, 23, 1093–1099.
30. (a) Brack Egg, A. In: Diccionario Enciclopedico de Plantas utiles del Peru´; 1999; p
187, Centro de Estudios Regionales Andinos Bartolome de las Casas: Cuzco, Peru.
(b) Miyake, M.; Sasaki, K.; Ide, K.; Matsukura, Y.; Shijima, K.; Fujiwara, D. J.
Immunol. 2006, 176, 5797–5804. (c) Lovera, A.; Bonilla, C.; Hidalgo, J. Rev. Peru´
Med. Exp. Salud Publica 2006, 23, 177–181.
149
31. Benavides, A.; Napolitano, A.; Bassarello, C.; Carbone, V.; Gazzerro, P.; Malfitano,
AM.; Saggese, P.; Bifulco, M.; Piacente, S.; Pizza, C. J. Nat. Prod. 2009, 72, 813–
817.
32. Vyavahare, V. P.; Chakraborty, C.; Maity, B.; Chattopadhyay, S.; Puranik, V. G.;
Dhavale, D. D. J. Med. Chem. 2007, 50, 5519-5523.
33. (a) Chatterjee, S.; Kanojia, S. V.; Chattopadhyay, S.; Sharma, A. Tetrahedron:
Asymmetry 2011, 21, 367–372; (b) Saikia, B.; Joymati Devi, T.; Barua, N. C.
Tetrahedron 2013, 69, 2157–2166; (c) Wadavrao, S. B.; Ghogare, R. S.; Venkat
Narsaiah, A. Tetrahedron Lett. 2012, 53, 3955–3958.
34. (a) Chattopadhyay, A. J. Org. Chem. 1996, 61, 6104–6107; (b) Goswami, D.;
Chattopadhyay, A.; Chattopadhyay, S. Tetrahedron: Asymmetry 2009, 20, 1957–
1961.
35. Sharma, A.; Gamre, S.; Chattopadhyay, S. Tetrahedron Lett. 2007, 48, 633–634.
36. Chattopadhyay, A.; Mamdapur, V. R. J. Org. Chem. 1995, 60, 585–587.
37. For reviews on olefin metathesis, see: (a) Armstrong, S. K. J. Chem. Soc. Perkin
Trans. 1, 1998, 371–388; (b) Schrock, R. R. Tetrahedron 1999, 55, 8141–8153; (c)
Blackwell, H. E.; O’Leary, D. J.; Chatterjee, A. K.; Washenfelder, R. A.; Bussmann,
D. A.; Grubbs, R. H. J. Am. Chem. Soc. 2000, 122, 58–71; (d) Fürstner, A. Angew.
Chem. Int. Ed. 2000, 39, 3012–3043; (e) Trnka, T. M.; Grubbs, R. H. Acc. Chem.
Res. 2001, 34, 18–29; For some leading references, see: (f) Chatterjee, A. K.; Choi,
T.-L.; Sanders, D. P.; Grubbs, R. H. J. Am. Chem. Soc., 2003, 125, 11360–11370; (g)
Galan, B. R.; Kalbarczyk, K. P.; Szczepankiewicz, S.; Keister, J. B.; Diver, S. T. Org.
Lett. 2007, 9, 1203–1206; (h) Lipshutz, B. H.; Aquinaldo, G. T.; Ghorai, S.;
Voigtritter, K. Org. Lett. 2008, 10, 1325–1328; (i) Ferrié, L.; Bouzbouz, S.; Cossy, J.
Org. Lett. 2009, 11, 5446–5448; (j) Voigtritter, K.; Ghorai, S.; Lipshutz, B. H. J. Org.
150
Chem., 2011, 76, 4697–4702; (k) Meek, S. J.; O’Brien, R. V.; Llaveria, J.; Schrock,
R. R.; Hoveyda, A. H. Nature 2011, 471(7339), 461–466.
38. "The Nobel Prize in Chemistry 2005" (Press release). Nobelprize.org. 5 October
2005.
39. (a) Chatterjee, S.; Ghadigaonkar, S.; Sur, P.; Sharma, A.; Chattopadhyay, S. J. Org.
Chem. 2014, 79, 8067–8076; (b) Chatterjee, S.; Sharma, A.; Chattopadhyay, S. RSC
Adv. 2014, 4, 42697–42705.
40. Takada, K.; Uehara, T.; Nakao, Y.; Matsunaga, S.; Van Soest, R. W. M.; Fusetani, N.
J. Am. Chem. Soc. 2004, 126, 187–193.
41. (a) Burgoyne, D. L.; Miao, S.; Pathirana, C.; Andersen, R. J.; Ayer, W. A.; Singer, P.
P.; Kokke, W. C. M. C.; Ross, D. M. Can. J. Chem. 1991, 69, 20–27. (b) Ohba, M.;
Nishimura, Y.; Kato, M.; Fujii, T. Tetrahedron 1999, 55, 4999–5016. (c) Nakao, Y.;
Maki, T.; Matsunaga, S.; Van, Soest, R. W. M.; Fusetani, N. Tetrahedron 2000, 56,
8977–8987.
42. Bowen, E. G.; Wardrop, D. J. J. Am. Chem. Soc. 2009, 131, 6062–6063.
43. (a) Nakao, Y.; Maki, T.; Matsunaga, S.; van Soest, R. W. M.; Fusetani, N. J. Nat.
Prod. 2004, 67, 1346–1350. (b) Nakao, Y.; Maki, T.; Matsunaga, S.; van Soest, R. W.
M.; Fusetani, N. Tetrahedron 2000, 56, 8977–8987.
44. (a) Braun, C.; Brayer, G. D.; Withers, S. G. J. Biol. Chem. 1995, 270, 26778–26781.
(b) Mehta, A.; Zitzmann, N.; Rudd, P. M.; Block, T. M.; Dwek, R. A. FEBS Lett.
1998, 430, 17–22. (c) Dwek, R. A.; Butters, T. D.; Platt, F. M.; Zitzmann, N. Nat.
Rev. Drug Discovery 2002, 1, 65–75.
45. For a review of glycosidase inhibitors, see: Jung, M.; Park, M.; Lee, H. C.; Kang, Y.-
H.; Kang, E. S.; Kim, S. K. Curr. Med. Chem. 2006, 13, 1203–1218.
151
46. (a) Kuntiyong, P.; Akkarasamiyo, S.; Eksinitkun, G. Chem. Lett. 2006, 35, 1008–
1009; (b) Gurjar, M. K.; Pramanik, C.; Bhattasali, D.; Ramana, C. V.; Mohapatra, D.
K. J. Org. Chem. 2007, 72, 6591–6594; (c) Liu, G.; Romo, D. Org. Lett. 2009, 11,
1143–1146.
47. Che, C.; Zhang, Z.-N.; Huang, G.-L.; Wang, X.-X. Chin. J. Org. Chem. 2004, 24,
1281–1283.
48. Dhotare, B.; Salaskar, A.; Chattopadhyay, A. Synthesis 2003, 2571–2575.
49. Biswas, S.; Chattopadhyay, S.; Sharma, A. Tetrahedron: Asymmetry 2010, 21, 27–32.
50. Gravier-Pelletier, C.; Le Merrer, Y. ; Depezay, J. –C. Tetrahedron 1995, 51, 1663–
1674.
51. For reviews on biology and synthesis: (a) Napolitano, J. G.; Daranas, A. H.; Norte,
M.; Fernandez, J. J. Anticancer Agents Med. Chem. 2009, 9, 122–137; (b) Hale, K. J.;
Manaviazar, S. Chem. Asian J. 2010, 5, 704–754.
52. Michel, K. H.; Demarco, P. V.; Nagarajan, R. J. Antibiot. 1977, 30, 571–575.
53. (a) Hase, T. A.; Nylund, E. -L. Tetrahedron Lett. 1979, 20, 2633–2636; (b) Asaoka,
M.; Yanagida, N.; Takai, H. Tetrahedron Lett. 1980, 21, 4611–4614; (c) Asaoka, M.;
Mukuta, T.; Takai, H. Chem. Lett. 1982, 215–218; (d) Trost, B. M.; Brickner, S. J. J.
Am. Chem. Soc. 1983, 105, 568–575; (e) Fujisawa, T.; Okada, N.; Takeuchi, M.; Sato,
T. Chem. Lett. 1983, 1271–1272; (f) Bestmann, H. J.; Schobert, R. Angew. Chem. Int.
Ed. Engl. 1986, 24, 791–792; (g) Bienz, S.; Hew, M. Helv. Chim. Acta 1987, 70,
1333–1340; (h) Baldwin, J. E.; Adlington, R. M.; Ramcharitar, S. H. J. Chem. Soc.
Chem. Commun. 1991, 940–942.
54. (a) Tatsuta, K.; Amemiya, Y.; Kanemura, Y.; Kinoshita, M. Bull. Chem. Soc. Jpn.
1982, 55, 3248–3253; (b) Quinkert, G.; Kueber, F.; Knauf, W.; Wacker, M.; Koch,
U.; Becker, H.; Nestler, H. P.; Dürner, G.; Zimmermann, G.; Bats, J. W.; Egert, E.
152
Helv. Chim. Acta 1991, 74, 1853–1923; (c) Kobayashi, Y.; Okui, H. J. Org. Chem.
2000, 65, 612–615; (d) Lee, W.; Shin, H. J.; Chang, S. Tetrahedron: Asymmetry 2001,
12, 29–31; (e) Gebauer, J.; Blechert, S. J. Org. Chem. 2006, 71, 2021–2025; (f)
Sinha, S. C.; Sinha-Bagchi, A.; Keinan, E. J. Org. Chem. 1993, 58, 7789–7796; (g)
Nagarajan, M. Tetrahedron Lett. 1999, 40, 1207–1210.
55. (a) Masamune, S.; Bates, G. S.; Corcoran, J. W. Angew. Chem. Int. Ed. Engl. 1977,
16, 585–607; (b) Nicolaou, K. C. Tetrahedron 1977, 33, 683–710; (c) Back, T. G.
Tetrahedron 1977, 33, 3041–3059; (d) Mori, K. Tetrahedron 1989, 45, 3233–3298;
(e) Simpson, T. J. Nat. Prod. Rep. 1987, 4, 339–376.
56. For some reviews: (a) Michels, P. C.; Khmelnitsky, Y. L. J. S. Dordick and D. S.
Clark, Trends Biotechnol., 1998, 16, 210–215; (b) Garcia-Urdiales, E.; Alfonso, I.;
Gotor, V. Chem. Rev. 2005, 105, 313–354; (c) van Rantwijk, F.; Sheldon, R. Chem.
Rev. 2007, 107, 2757–2785; (d) Hudlicky, T.; Reed, J. W. Chem. Soc. Rev. 2009, 38,
3117–3132; (e) Clouthierzab, C. M.; Pelletier, J. N. Chem. Soc. Rev. 2012, 41, 1585–
1605.
57. (a) Salvi, N. A.; Chattopadhyay, S. Tetrahedron 2001, 57, 2833–2839; (b) Salvi, N.
A.; Chattopadhyay, S. Bioorg. Med. Chem. 2006, 14, 4918–4922; (c) Salvi, N. A.;
Chattopadhyay, S. Tetrahedron: Asymmetry 2008, 19, 1992–1997; (d) Zhou, B. N.;
Gopalan, A. S.; Van Middlesworth, F.; Shieh, W. Ru; Sih, C. J. J. Am. Chem.
Soc. 1983, 105, 5925-5926; (e) Manzocchi, A.; Fiecchi, A.; Santaniello, E. J. Org.
Chem. 1988, 53, 4405–4407 and references cited therein; (f) Keinan, E.; Sinha, S. C.;
Sinha-Bagchi, A. J. Org. Chem. 1992, 57, 3631–3637.
58. (a) Keith, J. M.; Larrow, J. F.; Jacobsen, E. N. Adv. Synth. Catal. 2001, 343, 5–26; (b)
Lee, J. H.; Han, K.; Kim, M. -J.; Park, J. Eur. J. Org. Chem. 2010, 999–1015; (c)
Mitsunobu, O. Synthesis, 1981, 1–28; (d) Dembinski, R. Eur. J. Org. Chem. 2004,
153
2763–2772; (e) Swamy, K. C.; Kumar, N. N.; Balaraman, E.; Kumar, K. V. Chem.
Rev. 2009, 109, 2551–2651.
59. (a) Reetz, M. T. Curr. Opin. Chem. Biol. 2002, 6, 145–150; (b) Faber, K.;
Biotransformations in Organic Chemistry; Springer: Heidelberg, Germany, 5th Ed.
2004; (c) Bornscheuer, U. T.; Kazlauskas, R. J. Hydrolases in Organic Synthesis;
Wiley-VCH: Weinheim. Germany, 2nd Ed. 2005; (d) Gotor-Fernández, V.; Busto, E.;
Gotor, V. Adv. Synth. Catal. 2006, 797–812.
60. Sharma, A.; Pawar, A. S.; Chattopadhyay, S. Synth. Commun. 1996, 26, 19–25.
61. Kazlauskas, R. J.; Weissfloch, A. N. E.; Rappaport, A. T.; Cuccia, L. A. J. Org.
Chem. 1991, 56, 2656–2665.
62. (a) Martin, B. D.; Ampofo, S. A.; Linhardt, R. J.; Dordick, J. S. Macromol. 1992, 25,
7081–7085; (b) Haughton, L.; Williams, J. M. J.; Zimmermann, J. A. Tetrahedron:
Asymmetry 2000, 11, 1697–1701; (c) Athawale, V.; Manjrekar, N. J. Mol. Catal. B:
Enz. 2000, 10, 551–554; (d) Petersson, A. E. V.; Adlercreutz, P.; Mattiasson, B.
Biotechnol. Bioeng. 2007, 97, 235–241; (e) Nordblad, M.; Adlercreutz, P. Biotechnol.
Bioeng. 2008, 99, 1518–1524.
63. Sundby, E.; Perk, L.; Anthonsen, T.; Aasen, A. J.; Hansen, T. V. Tetrahedron 2004,
60, 521–524.
64. Arai, K.; Rawlings, B. J.; Yoshizawa, Y.; Vederas, J. C. J. Am. Chem. Soc. 1989, 111,
3391–3399.
65. (a) Teo, Y. -C.; Tan, K. -T.; Loh, T. -P. Chem. Commun. 2005, 1318–1320; (b)
Goswami, D.; Sur, P.; Chattopadhyay, A.; Sharma, A.; Chattopadhyay, S.
Synthesis 2011, 1626–1632.
66. Bestmann, H. J.; Schobert, R. Angew Chem. Int. Ed. Engl. 1985, 24, 791–792.
154
67. (a) Burke, M. D.; Schreiber, S. L. Angew. Chem. Int. Ed. 2004, 43, 46–58; (b)
Galloway, W. R. J. D.; Isidro-Llobet, A.; Spring, D. R. Nature Commun. 2010, 1, 80.
doi:10.1038/ncomms1081.
68. (a) Burke, M. D.; Berger, E. M.; Schreiber, S. L. Science 2003, 302, 613–618;
(b) Wetzel, S.; Bon, R. S.; Kumar, K.; Waldmann, H. Angew. Chem. Int. Ed. 2011,
50, 10800–10826.
69. (a) Kis, Z.; Furger, P.; Sigg, H. P. Experientia 1969, 25, 123–124; (b) Nozoe, S.;
Hirai, K.; Tsuda, K.; Ishibashi, K.; Shirasak, M. Tetrahedron Lett. 1965, 4675–4677;
(c) Grove, J. F. J. Chem. Soc. 1971, 12, 2261–2263; (d) Kind, R.; Zeeck, A.; Grabley,
S.; Thiericke, R.; Zerlin, M. J. Nat. Prod. 1996, 59, 539–540.
70. (a) Kastanias, M. A.; Chrysayi-Tokousbalides, M. Pest Manag. Sci. 2000, 56, 227–
232; (b) Karsten, K.; Umar, F.; Ulrich, F.; Barbara, S.; Siegfried, D.; Gennaro, P.;
Piero, S.; Sándor, A.; Tibor, K. Eur. J. Org. Chem. 2007, 3206–3211; (c) Zhang, W.;
Krohn, K.; Egold, H.; Draeger, S.; Schulz, B. Eur. J. Org. Chem. 2008, 4320–4328;
(d) Kind, R.; Zeeck, A.; Grabley, S.; Thiericke, R.; Zerlin, M. J. Nat. Prod. 1996, 59,
539–540. (e) C. Christner, G. Kullertz, G. Fischer, M. Zerlin, S. Grabley, R.
Thiericke, A. Taddei, A. Zeeck, J. Antibiot. 1998, 51, 368–371.
71. (a) Dommerholdt, E. J.; Thijs, L.; Zwanenburg, B. Tetrahedron Lett. 1991, 32, 1499–
1502; (b) Machinaga, N.; Kibayashi, C. Tetrahedron Lett. 1993, 34, 841–844; (c)
Amigoni, S.; Le Floc’h, Y. Tetrahedron:Asymmetry 1997, 8, 2827–2831; (d) Yadav,
J. S.; Reddy, U. V. S.; Reddy, B. V. S. Tetrahedron Lett. 2009, 50, 5984–5986; (e)
Oh, H.-S.; Kang, H.-Y. Bull. Korean Chem. Soc. 2011, 32, 2869–2870; (f) Yadav, J.
S.; Reddy, G.; Rao, T. S.; Reddy, B. V. S.; Ghamdi, A. A. K. A. Synthesis 2012, 783–
787; (g) Nuguri, S; Vuppula, N. K.; Eppakayala, L.; Prasad K. R. J. Pharm. Res.
2013, 6/7, 559–564.
155
72. Trost, B. M.; Quintard, A. Angew. Chem. Int. Ed. 2012, 51, 6704 –6708.
73. (a) Mori, K. Tetrahedron 1981, 37, 1341–1342; (b) Nakamura, K.; Kinoshita, M.;
Ohno, A. Tetrahedron 1995, 51, 8799–8808; (c) Kinoshita, M.; Ohno, A. Tetrahedron
1996, 52, 5397–5406; (d) Steinreiber, A.; Stadler, A.; Mayer, S. F.; Faber, K.; Kappe,
C. O. Tetrahedron Lett. 2001, 42, 6283–6286; (e) Steinreiber, A.; Edegger, K.;
Mayer, S. F.; Faber, K. Tetrahedron: Asymmetry 2001, 12, 2067–2071; (f) Fantin, G.;
Fogagnolo, M.; Medici, A.; Pedrini, P.; Fontana, S. Tetrahedron: Asymmetry 2000,
11, 2367–2373; (g) Belan, A.; Bolte, J.; Fauve, A.; Gourcy, J. G.; Veschambre, H. J.
Org. Chem. 1987, 52, 256–260; (h) Fantin, G.; Fogagnolo, M.; Giovannini, P. P.;
Medici, A.; Pedrini, P. Tetrahedron: Asymmetry 1995, 6, 3047–3053; (i) Clair, N. S.;
Wang, Y.-F.; Margolin, A. L. Angew. Chem. 2000, 112, 388–391; (j) Chen, S. L.; Hu,
Q. Y.; Loh, T. P. Org. Lett. 2004, 6, 3365–3367.
74. (a) Patil, P. N.; Chattopadhyay, A.; Udupa, S. R.; Banerji, A. Biotech Lett. 1993, 15,
367–372; (b) Ferreira, H. V.; Rocha, L. C.; Severino, R. P.; Viana, R. B.; da Silva, A.
B. F.; Porto, A. L. M. J. Iran. Chem. Soc. 2010, 7, 883–889; (c) Burgess, K.;
Henderson, I. Tetrahedron: Asymmetry 1990, 1, 57–60.
75. Jana, N.; Mahapatra, T.; Nanda, S. Tetrahedron: Asymmetry 2009, 20, 2622–2628.
76. Cabrera, Z.; Fernandez-Lorente, G.; Fernandez-Lafuente, R.; Palomo, J. M.; Guisan,
J. M. J. Mol. Cat. B: Enz. 2009, 57, 171–176.
77. Enders, D.; Nguyen, D. Synthesis 2000, 2092–2098.
78. Gurjar, M. K.; Nagaprasad, R.; Ramana, C. V. Tetrahedron Lett. 2003, 44, 2873–
2875.