Approved Suppliers and Processors
Vendor Phone Vendor FAX
For all NADCAP approved Processes, see the complete Process listing at
eAuditnet or contact G&H QA Dept. for exact Process approval.
Page 1 of 111Monday, August 05, 2013
3H Manufacturing 1318 Newlin Dr
47045
Richmond TX 77406 281-342-1478
Ashley (sales) [email protected]
281-342-5827
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacture subsea electrical products.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/26/2013
Basic supplier requirements No NoNo
A & A Enterprises 12421 Charloma
36492
Tustin CA 92680 714-730-7726
WP Haines, General Mgr./Alice Haines, QA Mgr.
714-730-3685
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Calibration and certification
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/11/2015
MISCELLANEOUS ITEMS/SERVICES No NoNo
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A No NoNo
A & B Die Casting (Formerly Benda Tool) 900 Alfred Nobel Drive
14415
Hercules CA 94547 510-741-3170
Ted Groom, QA Manager/Bob Drake, President.
510-724-7765
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mfr. Of custom aluminum and zinc die castings.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/9/2015
DIE CASTING ASTM B-85-92A No NoNo
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Monday, August 05, 2013 Page 1 of 111
A & S Mold and Die Corp. 9705 Eton Avenue
2009
Chatsworth CA 91311 818-341-5393
Arno Adlhoch, President/Richard Herbert, Q.M.
818-341-3824
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mfr. Injection molding tools, custom plastic injection molded products/Contract mfg. Of injection molded products and assemblies.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/28/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoYes
PLASTIC MOLDED OR EXTR. GOODS No NoNo
A. E. Petsche Company, Inc. 2112 W. Division St.
37037
Arlington TX 76012 817-461-9473
Glenn Davidson, CEO, Dale Gant, QA Manager
817-277-2887
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Ditributor of fabricated wire.ISO 9001:2000 and AS9100 Rev. B
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/14/2015
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
A. L. Johnson 4671 Calle Carga
36934
Camarillo CA 93012 805-389-4631
Rick Klein Gen.Mgr. / Ricardo Garcia QA Mgr.
805-389-4632
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Precision castings and machining.Aluminum and Zinc castings with machining capabilities
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/11/2015
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
RUBBER/PLASTER MOLD CASTINGS No NoNo
NON-FERROUS METALS No NoNo
HEAT TREAT ALUMINUM MIL-H-6088 FORGED/WROUGHT No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
Quality System ISO9001:2000 No NoNo
Monday, August 05, 2013 Page 2 of 111
A. T. Wall 55 Service Avenue
37026
Warwick RI 02886 401-739-0740
Jeff Stevens, QA Mgr.
401-732-5784
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Specialty ferrous and non-ferrous tubing and metal stampings.TUBE BENDING/FORMING/MTL SPNNG
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/6/2015
TUBE BENDING/FORMING/MTL SPNNG Yes NoNo
Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
AAA Plating & Inspection, Inc. 424 Dixon Street
36393
Compton CA 90222 323-979-8930
Jerry Wahlin, President Maurice Lew, QC Manager Gary Ragan, Q
310-637-1066
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal finishing including ion vapor deposition of aluminium, vacuum cadmium and non-destructive testing for the aerospace industry excluding design and servicing.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No Yes Survey Due: 11/28/2015
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No YesNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No YesNo
PASSIVATION/CLEANING MIL-S-5002 No YesNo
Model for Aerospace Quality Assurance Systems AS9100 No YesYes
ANODIZING - ALUMINUM MIL-A-8625 (1) TYPE I-CHRMIC(DY/UDY) No YesYes
ANODIZING - ALUMINUM MIL-A-8625 TYPE II-SULF (DY/UDY) No YesYes
ANODIZING - ALUMINUM MIL-A-8625 TYPE III - HARD No YesYes
ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR No YesNo
CADMIUM PLATING QQ-P-416 TYPE I, II, III No YesYes
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 No YesNo
ION VAPOR DEPOSITED ALUMINUM MIL-C-83488 No YesNo
PASSIVATION QQ-P-35 TYPE II No YesYes
NON-DESTRUCTIVE TESTING PENETRANT AC7114/1 No YesYes
Non Destructive Testing AC7114 No YesYes
CHEMICAL PROCESSING AC7108 No YesYes
CADMIUM PLATING QQ-P-416 TYPE I,II No YesYes
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION I MIL-L-46010 TYPE I, II No YesNo
NON DESTRUCTIVE TESTIN MAGNETIC PARTICLE AC7114/2 No YesYes
Monday, August 05, 2013 Page 3 of 111
Able Aerospace Adhesives (formerly ABL Aero) 25032 Anza Drive
36426
Valencia CA 91355 661 257-2500
Lata Wadhwani, Office Mgr.
661 257-2418
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Sales, Distribution of composite materials, adhesives, coatings, lubricants, chemicals, dispensing supplies and equipment, paint soldering materials, tapes, mold release, thermal material, cleaning products and safety equipment.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/2/2016
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Abrasive Finishing Company 14920 SO. MAIN
36603
Gardena CA 90248 213 323-7175
Mike Garcia, Q.C. Mgr.
213 323-7175
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Boeing approved for shot peening. Added 11/11/08 per Boeing ASL for process of P/N 1200-106-001
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
Shot Peening of Metal Parts MIL-S-13165 TYP I, II No NoNo
Shot peening, Peen Forming, Glass Bead peening AC7117 No NoNo
Accumetric, LLC 350 Ring Road
6822
Elizabethtown KY 42701 270-769-3385
Cordelia Ball QA Mgr
270-765-2412
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacture adhesives.Manufacturing and package silicone sealants, acrylics, firestops, silicone oils, and emulsions.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/21/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
Advanced Technology Company 2858 E. Walnut Street
36558
Pasadena CA 91107 626-449-2696
Robert DeSilvestri, Owner & GM Tom Huntzinger, QA Manager
626-793-9442
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Electron beam welding.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/5/2014
NADCAP - Welding/Brazing AC7110 Yes NoYes
NADCAP SAE Aerospace Standard AS7003 Yes NoYes
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
Monday, August 05, 2013 Page 4 of 111
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
FSN WLD (ALL) (EBW) 999-056 Yes NoNo
NADCAP - Fusion Welding AC7110/5 Yes NoYes
NADCAP - Laser Welding AC7110/6 Yes NoYes
FSN WLDG STEEL & SUPER ALLOYS (EBW) MIL-W-46132 Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
FSN WLD ALM,MAG,TT&ALM-BRYLM (EBW) MIL-W-46132 Yes NoNo
LASER WELDING 999-086 Yes NoNo
NADCAP - Electron Beam Welding AC7110/3 Yes NoYes
LASER CUTTING/MARKING/DRILLING Yes NoNo
FSN WLDG STEEL & SUPER ALLOYS 999-056 EBW Yes NoNo
Aero Electric Connector, Inc. 548 Amapola Avenue
41985
Torrance CA 90501 310-618-3737
John Schneff, President/George Adams, Quality Dir.
310-618-3738
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Design, Mfr., Marketing and Dist. Of electronic connectors to AS9100 requirements for military and aerospace applications under the following brands: Aero Electric Connectors/J-Techn and EMP Connectors.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/15/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
PRODUCT ASSURANCE PROGRAM MIL-STD-790 No NoNo
FASTENERS PROCESSING No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Aero-Dyne Supply Inc. 474 WHITNEY STREET
42788
SAN LEANDRO CA 94577 510-562-0657 510-562-8051
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/7/2014
G&H BASIC QUALITY SYSTEM No NoNo
Aerotest Operations, Inc. 3455 Fostoria way
75605
San Ramon CA 94583 925-866-1212 925-866-1716
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Neutron Radiography Service
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/21/2013
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208 No NoNo
Monday, August 05, 2013 Page 5 of 111
AFM Machining Inc. 340 Hearst Drive
48507
Oxnard CA 93030 805-278-2708-
Bob Byrne
805-278-2707
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machining /Calibration
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
Pending SurveyG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/22/2015
Machining / Calibration No NoNo
Aiconics Inc. 12150 Paine Place
36636
Poway CA 92064 858-513-2115
Richard Ball, General Manager, Tom Roberson, QA Manager
858-513-2124
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Sealing plugs, insertion removal tools and contacts. Off the shelf , connector related products, example tools, seal plugs, etc.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
Pending SurveyG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 3/20/2014
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes NoNo
CRIMPING INS./REMOVAL TOOLS Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
Air Electro, Inc. 9452 De Soto Avenue
36647
Chatsworth CA 91311 818-407-5400
Steven Strull President
818-407-5460
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Electrical connector and contact mfr and distributor.ISO 9001:2000 & AS9100:2004 Rev. B, ELECTRONIC ASSEMBLY
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/6/2015
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
QUALITY SYSTEMS FOR PRODUCTION ISO-9002 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
ELECTRONIC ASSEMBLY Yes NoNo
Monday, August 05, 2013 Page 6 of 111
Alert Plating Co. 9939 Glenoaks Bouleva
A15690
Sun Valley CA 91352 818-771-9304
Mussadig Hussain, Quality Mgr.
818-771-0018
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Plating, Metal Finishing
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/16/2016
NADCAP - Chemical Processing AC7108 No NoYes
AS7003 No NoYes
NADCAP - AQS - Inspection and Test Quality System AC7004 No NoYes
All Metals Processing 8401 Standustrial
37059
Stanton CA 90680 714-828-8238
Waher J. Fairfox, Jr. - President Kenneth A. Ferguson, QC Manage
714-828-4552
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
This vendor is approved on Boeing's MIL-C-26074 AVL.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 8/17/2013
PASSIVATION/CLEANING MIL-S-5002 No NoNo
COOPER SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
PASSIVATION QQ-P-35 TYPE II No NoNo
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No NoNo
MISCELLANEOUS ITEMS/SERVICES No NoNo
NADCAP- Standard Requirements AC7004 No NoNo
ELECTROLESS NICKEL MIL-C-26074 CL 3, GRADE A No NoNo
ANODIZING - ALUMINUM MIL-A-8625 TYPE III CL(1) No NoNo
ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR No NoNo
CADMIUM PLATING QQ-P-416 TYPE I,II No NoNo
CADMIUM PLATING QQ-P-416 TYPE I, II, III No NoNo
QUALITY SYSTEMS FOR PRODUCTION ISO-9002 No NoNo
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION I MIL-L-46010 TYPE I, II No NoNo
All Seals Inc. 20762 LINEAR AVE
36736
LAKE FOREST CA 92630 714-556-4931
Jerry Barnett, President/ Russ Ayers-QC Manager
714-557-3257
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Rubber seals, gaskets, o-rings, quad-rings,adhesives, rotary shaft seals.QUEST SUPPLIER 8/06
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/20/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Monday, August 05, 2013 Page 7 of 111
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A Yes NoNo
RUBBER MOLDED GOODS Yes NoNo
RUBBER EXT,CALENDERING&COMP Yes NoNo
Alliance Express 10024 Romandel, Ave.
36780
Santa Fe Sprin CA 90670 562-946-3024 562-944-6852
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Division of Alliance Plastics. Same company.Injection molded plastic caps, plugs, and other protection components. Our products do not contain restricted, toxic, or hazardous substances.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/6/2015
Yes NoNo
Alliance Finishing & Mfg. 1721 Ives Ave.
64712
Oxnard CA 93033 805 385-3330
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
NADCAP Plating
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/13/2015
Chemical Processing NADCAP AS7003 No NoYes
NADCAP - AQS - Inspection and Test Quality System AC7004 No NoYes
Alliance Plastics 3123 Station Road
6842
Erie PA 16510 800-832-8677
Tony Herbert, President Randall Dinger, Quality Manager Rhonda
814-898-1638
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Injection molded plastic caps, plugs, and other protection components. Our products do not contain restricted, toxic, or hazardous substances.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/8/2016
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
DUST CAPS Yes NoNo
QUALITY SYSTEM REQUIREMENTS (AUTOMOTIVE IND QS-9000 Yes NoNo
ENVIRONMENTAL MANAGEMENT SYSTEMS ISO 14001:2004 Yes NoNo
Monday, August 05, 2013 Page 8 of 111
Allied Wire & Cable 101 Kestrel Drive
48242
Collegeville PA 19426 800-828-9473
Mike Reardon, [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/9/2015
Quality System ISO9001:2008 No NoNo
Almo Wire 2709 Commercial Way
47349
Phiadelphia CA 215-698-6099
Jim Manney
215-648-4052
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
electrical & Mil Spec Wire and Cable
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/28/2013
BASIC SUPPLIER REQUIREMENTS No NoNo
American Durafilm Co., Inc. 55 Boynton Rd.
38137
Holliston MA 01746-6770 508-429-8000
Jay Hendrick, President; Allen Patras, Q.C. Mgr.
508-429-8500
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor/Fabricator of teflon, kapton & peek films.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/18/2015
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
American Gage 870 North Batavia St
AMG
Orange Ca 92868 714-997-0291
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
IAS CL-111 Calibration Laboratory
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/2/2016
IAS CL-111 Calibration Laboratory No NoNo
BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 9 of 111
Amet, Inc. 2310 Michigan Avenue
36912
Santa Monica CA 90404 310-828-8484
Karl-Heinz Hirzel, President
310-828-9670
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Precision Machined Parts.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/10/2016
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
MACHINING NC TURNING Yes NoNo
MACHINING CNC TURNING Yes NoNo
TOOL MAKING JIG & FIXT. BLDG. Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes NoNo
AMK Welding 283 Sullivan Ave
C31012A
South Windsor CT 06074-0663 860-289-5634
Used by Continental Machine Tool Co.,Inc.
860-528-2472
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Welding
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/15/2016
Quality System ISO9001:2008 No NoNo
Amphenol/Bendix Corporation 40-60 Delaware Avenue
36935
Sidney NY 13838 607-563-5011
Gary Anderson, General Manager David Karklin, Quality Director W
607-563-5690
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Electrical Connectors.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/12/2012
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
NICKEL PLATING QQ-N-290 ELECTRO DEPOSITED No NoNo
CONN.PARTS(HOOD,B/SHELLSETC) No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
Quality System ISO9001:2000 No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
HEAT TREAT ALUMINUM MIL-H-6088 FORGED/WROUGHT No NoNo
ANODIZING - ALUMINUM MIL-A-8625 TYPE II-SULF (DY/UDY) No NoNo
ANODIZING - ALUMINUM MIL-A-8625 TYPE III - HARD No NoNo
COPPER PLATING MIL-C-14550 No NoNo
HEAT TREAT ALLOY STEEL MIL-H-6875 CRS IND. SEL. No NoNo
Monday, August 05, 2013 Page 10 of 111
PASSIVATION QQ-P-35 TYPE II No NoNo
TIN PLATING MIL-P-81728 TIN / LEAD No NoNo
PRECIOUS METAL PLATING QQ-S-365 SILVER No NoNo
Anixter Pentacon, Inc. 21123 Nordhoff Street
36979
Chatsworth CA 91311 818-727-7800
Ron Basque Director of QA, Cyrus Bral QA Manager, Melissa McK
818-727-9636
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Procurement of fasteners and electronic hardware for domestic and international distribution activities and the provision for value added hardware modification.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/11/2016
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
Quality System ISO9001:2000 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Aplastek 11834 Camilla St.
36990
Whittier CA 90601 562-692-8735
Jerry Roberts, Owner
562-695-4607
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Plastic Machined Parts.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/18/2014
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
Applied Industrial Tech 5107 Walker Street
37001
Ventura CA 93003 805-644-8941
Bob Werner - Service Center Manager
805-642-9467
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Bearings, drive products & systems, fasteners, rubber products, paints, springs adhesives, etc.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/6/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 11 of 111
Aremac Heat Treating 330 9TH AVE
ST213696
City of Industry CA 91746 626-333-3898 626-369-2932
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
SUBTIER proccessor for L.A Gauge.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
For use by Sub-Tier only - See Vend NotesG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/8/2015
SAE Aerospace Standard AS7003 No NoNo
NADCAP Aluminum Heat Treating AC7102/2 No NoNo
NADCAP Heat Treating AC7102 No NoNo
Associated Spring Barnes Group, Inc. 434 W. Edgerton Ave
42571
Milwaukee WI 53207 414-482-1600
Paul Bodine, QA Mgr.
414-482-3558
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Springs
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/30/2015
Quality Management System ISO/TC 16949:2002 No NoNo
Quality System ISO9001:2008 No NoNo
Associated Spring Corp. 6180 Valley View Avenu
4968
Buena Park CA 90620 800-872-7732
David Baughman, Div. Mgr./Paula Bodine, Quality Mgr.
714-523-5120
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Stampings, springs & precision wireforms.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/21/2015
Quality System ISO9001:2008 No NoNo
Astro Tool Corp. 21615 SW Tualatin Vall
7609
Beaverton OR 97006 503-642-9853
J. Alvarez QA Manager
503-591-7766
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Connector Asselmbly and Mainterance Tooling for Military, Aerospace, Medical and Telecommunication Industries
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/13/2014
MISCELLANEOUS ITEMS/SERVICES No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
Monday, August 05, 2013 Page 12 of 111
Atlas Bolt & Supply 10835 Kalama River Av
48521
Fountain valley CA 92708 714-965-5300
William Weber, [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Fastener Distributor
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/8/2015
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Aurora Casting & Engineering 1790 Lemonwood Dr.
37040
Santa Paula CA 93060 805-933-2761
John Penrose, President/ David Connelly, QA Manager.
805-525-5816
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Investment Casting.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 7/19/2013
Welding AS7003 Yes NoNo
INVESTMENT CASTING (WAX) ASTM B-618-94 Yes NoNo
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEMS FOR PRODUCTION ISO-9002 Yes NoNo
HEAT TREAT ALUMINUM AMS 2770 Yes NoNo
Heat Treat AS7003 Yes NoYes
Quality System ISO9001:2000 Yes NoNo
HEAT TREAT ALUMINUM MIL-H-6088 FORGED/WROUGHT Yes NoNo
HEAT TREAT ALLOY STEEL MIL-H-6875 CRS IND. SEL. Yes NoNo
Automatic Components Inc. 3000 Worthen Avenue
37043
Los Angeles CA 90039 323-664-1994
Timothy Clark, Corp. Secretary & Gen. Mgr.
323-664-0166
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mfr machine parts.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 7/11/2016
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
MACHINING CONVENTIONAL SCREW MACHININ Yes NoNo
BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Monday, August 05, 2013 Page 13 of 111
Autosplice Versatile (Frmly: Versatile Eng.) 7551 Rosecrans Ave
37000
Paramount CA 90723 310-933-3630
Adolf Weiss, Operations Manager Raul Gutierrez, QA Manager Lei
310-933-3632
Process:
Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
High Speed Precision Stamping
*Note: The 10121 Barnes Canyon Rd, San Diego CA address is the global headquarters. The survey we have on file (see survey in file for details) covers all California locations.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/10/2016
WIRE FORMING Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
FOUR SLIDE Yes NoNo
PROGRESSIVE DIE Yes NoNo
Avibank Manufacturing, Inc. 11500 Sherman Way
42329
North Hollywoo CA 91609-1909 818-392-2100
Mike Hall Gen.Mgr. / Peter Wang QA Mgr.
818-255-0111
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mfr. Fasteners.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/28/2015
MFG &/OR ASSY. CONNECTORS No NoNo
EMI AND RFI SHIELDING No NoNo
ELECTRONIC ASSEMBLY No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
FASTENERS PROCESSING No NoNo
Bal Seal Engineering Co., Inc. 19650 Pauling
37051
Foothill Ranch CA 92610 949-460-2155
Rob Sjostedt President/CEO, Jesse Flores VP of Quality Assuranc
949-460-2300
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Canted coil energized spring fluid seals; Springs
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/21/2015
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
Quality System ISO TS 169491/7/2013200 Yes NoNo
SMPLG PROC. & TBLS BY VAR. FOR % NON-CONF. ANSI/ASQC Z1.9-1993 Yes NoNo
Monday, August 05, 2013 Page 14 of 111
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
Bal-Tec 1550 E. Slauson Avenu
37053
Los Angeles CA 90011 800-322-5832
Patricia Johnson, QA Manager
323-582-0934
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Precision ball manufacturing.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/5/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Barry Avenue Plating 2210 Barry Ave
37054
Los Angeles CA 90064 310-478-0078 310-312-0702
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
General plating services.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No Yes Survey Due: 11/21/2015
MIL-P-23377 No YesYes
MIL-F-14072 No YesYes
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No YesNo
MIL-P-53022 No YesYes
MIL-C-53039 No YesYes
NADCAP - AQS - Inspection and Test Quality System AC7004 No YesYes
NADCAP NonDestructive Testing - Magnetic Particle AC7114/2 No YesYes
NADCAP NonDestructive Testing - Penetrant AC7114/1 No YesYes
NADCAP NonDestructive Testing AC7114 No YesYes
Anodizing AMS-A-8625 No YesYes
TT-P-28 No YesYes
MIL-PRF-23377 No YesYes
MIL-P-7962 No YesYes
MIL-P-53030 No YesYes
DOD-P-15328 No YesYes
MIL-F-7179 No YesYes
MIL-C-46168 No YesYes
Lubricant, Solid, Film, Heat Cured, Corrosion Inhibiting MIL-L-8937 No YesYes
Coating, Urethane, Aliphatic Isocyanate, for Aerospace App MIL-C-83286 No YesYes
MIL-C-8514 No YesYes
MIL-F-18264 No YesYes
AMS 2505 No YesYes
NADCAP - AQS - Inspection and Test Quality System AC7004 No YesYes
Magnetic Particle Inspection ASTM-E-1444 No YesNo
Monday, August 05, 2013 Page 15 of 111
Standard Practice for Liquid Penetrant Examination ASTM-E1417 No YesNo
MIL-L-23398 No YesYes
NADCAP - AQS - Inspection and Test Quality System AC7004 No YesYes
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No YesNo
MIL-L-46147 No YesYes
MIL-L-81329 No YesYes
MIL-C-22750 No YesYes
BG Detection Services 9235 Gleanoaks Blvd
ST113696
Sun Valley CA 91352 818-768-8655 818-504-6259
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
SUBTIER ONLY VENDOR FOR L.A GAUGE.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
For use by Sub-Tier only - See Vend NotesG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/6/2014
Etch Processes AC7108/2 REV A No NoNo
Chemical Processing AS7003 No NoNo
NADCAP - AQS - Inspection and Test Quality System AC7004 For use by Sub-Tier only No NoYes
Chemical Processing AC7108 Rev B No NoNo
SAE Aerospace Standard for Non Destructive Testing AS7003 No NoNo
Bisco Industries 1500 North Lakeview A
36391
Anaheim CA 92807 714-693-2901
Tom Dunhill (Dir. Of Warehousing), Glen Celley (President)
714-693-5980
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor (only) of fasteners and hardware, electronic components & circuit board hardware. Special processes are out sourced to sub contracted suppliers.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/8/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Quality System ISO9001:2008 No NoNo
Bodycote Thermal Processing 515 West Apra Street
36395
Compton CA 90220 310-604-8000
Phil Stella, District Manager/Rick Kelleher, QC Manager/Jose Vela
310-604-9959
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Heat treating.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 10/12/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
NADCAP - Materials Testing Laboratories - Hardness AC7101/5 Yes NoYes
Monday, August 05, 2013 Page 16 of 111
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
NADCAP - STANDARD FOR DISTRIBUTORS (HEAT TRE AC7102 Yes NoNo
Quality System ISO9001:2008 Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
HEAT TREAT ALLOY STEEL MIL-H-6875 CRS Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes NoNo
NADCAP- Standard Requirements AC7004 Yes NoYes
INSPECTION SYSTEM REQUIREMENTS (NASA) NHB 5300.4(1C) Yes NoNo
NADCAP - Materials Testing Laboratories - Metallography AC7101/4 Yes NoYes
Bodycote Thermal Processing - Rancho Domingue 515 West Apra Street
36396
Compton CA 90220 310-604-8000
Jose Catano, Division Manager, Dale Quimby, Sr. Quality Manager
310-604-9959
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Vacuum and hydrogen furnace brazing, high temperature coating and heat treating of refractory metals titanium alloys, steels, stainless steels, magnetic irons and copper alloys.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 10/12/2013
Nadcap Heat treating AS7003 Yes NoNo
HEAT TREAT, STEEL MIL-H-6875 Rev. A Yes NoNo
Quality System ISO9001:2008 Yes NoNo
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
HEAT TREAT CU & CU-ALLOYS MIL-H-7199 COPPER-BERYLLIUM Yes NoNo
HEAT TREAT TITANIUM MIL-H-81200 Yes NoNo
NADCAP - STANDARD FOR DISTRIBUTORS (HEAT TRE AC7102 Yes NoNo
Boker's, Inc. 3104 Snelling Ave.
17293
Minneapolis MN 55406 612-729-9365
Amy Kersey, President; Steve Eberlein, Q.A Mgr.
612-729-8910
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Washer manufacturers.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/5/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Monday, August 05, 2013 Page 17 of 111
Bondline Electronic Adhesives, Inc. 756 N. Pastoria Ave
36402
Sunnyvale CA 94085 408-830-9200
Neal Olson, President/Ed Sato, Director of Mfg, & QA/Fred Osawa,
408-830-9266
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Premixed frozen epoxy.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/11/2016
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
ADHESIVE Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Brady Worldwide, Inc. 6555 West Good Hope
56652
Milwaukee Wisc 53223 800-537-8791 800-292-2289
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
THT.60X3.50B4371AC (I.D. Labels)
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/13/2015
G & H BASIC QUALITY SYSTEM REQUIREMENTS Yes NoNo
Bralco Metals 15090 Northam St.
36406
La Mirada CA 90638 800-628-1864
Mike Hubbart, Div. Mgr
714-736-4840
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal distributor and slitting, leveling, shearing, precision sawing of aluminum, stainless steel, copper brass and bronze.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/6/2015
Quality System AS9100 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
BRANTNER & ASSOCIATES, INC. 1700 GILLESPIE WAY
48532
EL CAJON CA 92020 619-562-7070
Alan Lang [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacture electrical and fiber optic underwater connectors
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/16/2015
Quality System ISO9001:2008 No NoNo
Monday, August 05, 2013 Page 18 of 111
Braxton Manufacturing Co., Inc. 858 Echo Lake Road P
6696
Watertown CT 06795 860-274-6781
Joe Triano President / Darryl White Dir. Of Quality
860-274-9195
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal Stampings-Deep Draw for Medical, Electronics, Automotive and Other Industries.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/2/2016
Standard Specification for Chemical Passivation ASTM-A-967 Yes NoNo
Passivation Treatments for Corrosion Resistant Steel QQ-P-35 Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Brooktronics Engineering Corporation 28231 Avenue Crocker
36408
Valencia CA 91355 661-294-1195
Chris Helwig, President, QA Mgr.
661-294-9032
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Brush gold & nickel plate.NADCAP AC7004
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/10/2016
SELECTIVE/BRUSH PLATING MIL-STD-865 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
NADCAP - AQS - Inspection and Test Quality System AC7004 No NoYes
Brothers Swiss, Inc. 39450 Third Street East
36409
Palmdale CA 93550 661 947-7705
QA Manager, Jim Cirillo
661 947-7978
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machine parts.Precision Machining Small Parts.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/15/2016
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 No NoNo
MACHINING SWISS SCREW MACHINE No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
Monday, August 05, 2013 Page 19 of 111
Burbank Steel Treating, Inc. 415 So. Varney St.
36412
Burbank CA 91602 818-842-0975
Mildred N. Bennett (CEO), Oscar Escobar (Quality Control Assista
818-239-1588
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Steel heat treating, nitriding, annealling, carburizing, hardening.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No Yes Survey Due: 11/28/2015
Stainless and PH Stainless Steels AMS 2759/3 No YesYes
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No YesNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No YesNo
HEAT TREAT ALLOY STEEL MIL-H-6875 CRS No YesNo
HEAT TREAT CU & CU-ALLOYS MIL-H-7199 COPPER-BERYLLIUM No YesNo
HEAT TREAT BERYLLIUM MIL-H-81200 No YesNo
HEAT TREATMENT OF WROUGHT COPPER-BERYLLIU AMS-H-7199 No YesNo
Stainless and PH Stainless Steels AMS 2759/3 No YesNo
Steels AMS 2759/1 No YesNo
HEAT TREAT, STEEL MIL-H-6875 No YesNo
Steels AMS 2759/2 No YesNo
Stainless Martensitic Steels AMS 2759/5 No YesNo
Stainless Steels AMS 2759/4 No YesNo
Nitriding AMS 2759/6 No YesNo
Carbuizing AMS 2759/7 No YesNo
By Friday Engraving 9601 Cozycroft Ave #6
63456
Chatsworth CA 91311 818-341-2605
Jim Friday, President
818-341-2587
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Custom Engraving
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/7/2015
G&H Basic Supplier Requirements No NoNo
C.P. Precision, Inc. 58 Walker Lane
42835
Newtown PA 18940 215-968-7330
Gregory Smith QAM; Paul M. Brady President
215-968-5546
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
General Machining & Screw Machined ContactsISO 9001:2000ISO 9001:2008
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 5/7/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 20 of 111
Cableco 9816 Arlee Ave
36416
Santa Fe Sprin CA 90670 562-942-8076
Lonnie Hill QA Manager, James Currie
562-942-8176
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Chief products/services: Slings & things for slings hoists, winches & lifting devices, fall protection devices.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/10/2016
CABLE SWAGING/CABLE PRODUCTS Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Cal-Aurum Industries 15632 Container Lane
36418
Huntington Bea CA 92649 714-898-0996
Tim Tygard, QM [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Electroless and Electroplating Services
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/12/2015
Quality System AS9100C No NoNo
Quality System ISO9001:2008 No NoNo
California Fine Wire Co. 338 South 4th Street
17581
Grover Beach CA 93433 805-489-5144
Joe Ortiz, Quality Mgr.
805-489-5352
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mfr. Of fine and ultra fine wire wire products on a contract free basis. Gardena Location is approved as a Contract mfr. Of custom sealing devices including precision molded rubber products, gaskets washers, shims and custom o-rings.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/7/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
California Gasket & Rubber Corporation 1601 W. 134th Street
36423
Gardena CA 90249 310-323-4250
Scott Franklin, President Ralph Krawiec, QA Manager Bernard La
310-329-9721
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contract mfr. Of custom sealing devices including precision molded rubber products, gaskets washers, shims and custom o-rings.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/29/2015
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 No NoNo
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No NoNo
Monday, August 05, 2013 Page 21 of 111
RUBBER MOLDED GOODS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
GASKETS No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
California Technical Plating 11533 Bradley Avenue
36427
San Fernando CA 91340 818-365-8205
Dave Anzures Jr., QA Manager & President
818-365-4895
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Plating- Chem Film & Electroless Nickel.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/2/2014
TIN PLATING MIL-T-10727 TYPE I No NoNo
ELECTRO PLSHNG CRS WS 11745 No NoNo
SAND BLASTING No NoNo
VAPOR HONING No NoNo
SALT SPRAY TESTING MIL-STD-202 METHOD 10 No NoNo
ELECTROLESS NICKEL PLATING 999-367 No NoNo
NICKEL PLATING 999-310 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR No NoYes
ACID PICKLE No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
Passivation Treatments for Corrosion Resistant Steel QQ-P-35 TYPE II No NoYes
NICKEL PLATING MIL-C-26074 ELECTROLESS No NoYes
NADCAP- Standard Requirements AC7004 No NoYes
NICKEL PLATING QQ-N-290 ELECTRO DEPOSITED No NoNo
CADMIUM PLATING QQ-P-416 TYPE I,II No NoYes
PASSIVATION/CLEANING MIL-S-5002 No NoNo
chemical processing AS7003 No NoYes
Silver Plating AMS 2410 No NoYes
Cadmium Plating MIL-STD-870 No NoYes
PRECIOUS METAL PLATING QQ-S-365 SILVER No NoYes
Electroless Plating Nickel AMS 2404 No NoYes
Cadmium Plating AMS 2400 No NoYes
Monday, August 05, 2013 Page 22 of 111
Caplugs/Eric Dudley Co., Inc.(Protective Closure 7310 South La Cienega
36433
Inglewood CA 90302 323-678-9085
Jim Ray VP of Operations, Christine Koch QA & Purchasing Mana
310-671-8200
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Design manufacture and distributtion of injection Molded, Extruded and Vinyl Dip Molded Protective Products including caps, plugs and netting for industrial uses. Including Automotive, Military and other original equipment applications.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/11/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM REQUIREMENTS (AUTOMOTIVE IND QS-9000 No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
ENVIRONMENTAL MANAGEMENT SYSTEMS ISO 14001:2004 No NoNo
Castle Metals (A. M. Castle & Co.) 14001 Orange Avenue
36436
Paramount CA 90723 562-630-1400
Dick Moak, President & CEO John Gray, Corporate Quality Manag
562-634-1421
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Various metals. Alcoa, Kaiser, UAC, Alexco
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/12/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
CDM ELECTRONICS 130 American Blvd.
47552
Turnersville NJ 08012 856-740-1200
Mike Liccketto, Quality Mgr.
856-740-0500
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Part number M55181-7-01-P
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/8/2015
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Century Spring Corporation 222 East 16th Street
36440
Los Angeles CA 90015 213-749-1466
Bill Cook, QA Manager
213-749-3802
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacturing of commercial springs.Custom manufactured springs.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/6/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Monday, August 05, 2013 Page 23 of 111
Certified Steel Treating Corp. 2454 East 58th Street
ST37053
Los Angeles 90058
[email protected]/[email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Subtier vendor for Bal-Tec
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
For use by Sub-Tier only - See Vend NotesG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/19/2013
NADCAP - AQS - Inspection and Test Quality System AC7004 .For use by Sub-Tier only No NoNo
Chase Plastic 6483 Waldon Center Dr.
43164
Clarkston MI 48346 248-620-2120
Timothy Burns QAM; Robert V. Hoff
248-620-2342
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Plastic Resin
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 5/18/2013
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Cimini & Associates 46 Airport Road
89010
Westerly RI 02891 401-348-0388
Bridget Tobin
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Extruded Silver Tubing, Casting, Drawing, Machining
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 9/28/2015
BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Clariant Corporation 926 Elliot Road
Clariant
Albion MI 49224 877-546-2885
VP of Sales Dinesh Pandya
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Color concentrate
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 9/19/2015
Quality System ISO9001:2008 No NoNo
Monday, August 05, 2013 Page 24 of 111
CLK Engineering 1173 Calle Suerte
36447
Camarillo CA 93012 805-340-8811
Chris Kluczynski, Owner
805-484-8354
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machine Parts, Prototypes, Tooling
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/17/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
MACHINING GENERAL No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
CNC Manufacturing, Inc. 578 Rosedale Road Uni
CNC Mfg
Kennett Square PA 19348
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machine shop, small parts manufacturing.,Passivation Treatments for Corrosion Resistant Steel
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/17/2013
Passivation Treatments for Corrosion Resistant Steel QQ-P-35 No NoNo
CNC Precision 420 S. Date Ave #G
36451
Alhambra CA 91803 626-289-3721
Chuck Kwan, Owner
626-284-1588
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machining
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/29/2016
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Coastline Metal Finishing Corporation 7061 Patterson Drive
36453
Garden Grove CA 92841 714-895-9099
Phil M. Viljoen ; Allen Fowler, QA Manager
714-895-4728
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
General plating services.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/6/2015
NADCAP - Chemical Processing AC7108 Yes NoYes
ELECTROLESS NICKEL MIL-C-26074 CL 3, GRADE A Yes NoYes
NICKEL PLATING QQ-N-290 ELECTRO DEPOSITED Yes NoYes
CADMIUM PLATING QQ-P-416 TYPE II Yes NoNo
Monday, August 05, 2013 Page 25 of 111
ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR Yes NoYes
ANODIZING - ALUMINUM MIL-A-8625 TYPE III - HARD Yes NoYes
ANODIZING - ALUMINUM MIL-A-8625 TYPE II-SULF (DY/UDY) Yes NoYes
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
ANODIZING - ALUMINUM MIL-A-8625 TYPE III CL(1) Yes NoYes
Brush Plating MIL-STD-865 Yes NoYes
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
ELECTROLESS NICKEL PLATE MIL-C-26074 CL 1 Yes NoYes
Copper Plating AMS 2418 Yes NoYes
PASSIVATION/CLEANING MIL-S-5002 Yes NoNo
Conversion/Phosphate Coatings AMS 2473 Yes NoYes
Tin Plating ASTM B 545 Yes NoYes
Anodizing AMS-A-8625 Yes NoYes
COPPER PLATE, ELECTRODEPOSITED MIL-C-14550 Yes NoYes
Surface Treatment/Passivation AMS 2700 Yes NoYes
Silver Plating ASTM B 700 Yes NoYes
Electroless Plating Nickel AMS 2404 Yes NoYes
Electroless Plating Nickel AMS 2405 Yes NoYes
Gold Plating AMS 2422 Yes NoYes
Silver Plating AMS 2412 Yes NoYes
Nickel Plating AMS-QQ-N-290 Yes NoYes
GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 TYPE I, CL 1 Yes NoYes
Anodizing MIL-A-63576 Yes NoYes
TIN PLATING MIL-T-10727 TYPE II Yes NoYes
Plating, Tin-Lead (Electrodeposited) Alloy Plating MIL-P-81728 Yes NoYes
Surface Treatment/Passivation ASTM A 380 Yes NoYes
Anodizing AMS 2469 Yes NoYes
Anodizing AMS 2471 Yes NoYes
Anodizing AMS 2472 Yes NoYes
PASSIVATION QQ-P-35 TYPE II Yes NoYes
Passivation Treatments for Corrosion Resistant Steel AMS-QQ-P-35 Yes NoYes
Silver Plating QQ-S-365 SILVER Yes NoYes
PLATING TIN-LEAD (ELECTRODEPOSITED) AMS-P-81728 Yes NoYes
Anodizing AMS 2468 Yes NoYes
Quality System ISO9001:2008 Yes NoNo
Stripping MIL-STD-871 Yes NoYes
Monday, August 05, 2013 Page 26 of 111
Coining Technologies, Inc. 400 Kuller Road
36455
Clifton NJ 07011 (973)253-0500
John Lipari, Pres.& Gen. Mgr./ Courtney Chronley, Q.M.
(973)253-9611
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal stamping, coining, EDM, CNC & Swiss screw producer for the battery, electronics, defense, automotive & medical industries.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/7/2015
Quality System ISO9001:2000 No NoNo
G & H Basic Quality System Requirements No NoNo
Compression Products, Inc. 65 Silver Street
28251
Sheffield MA 01257 413-229-2763
Kimberly Bushnell
413-229-8031
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
For this vendor, the raw matl is provided by Cooper Interconnnect.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 7/2/2013
G & H BASIC QUALITY SYSTEM REQUIREMENTS Yes NoNo
Connector Contacts, Inc. 714 East Edna Place
36460
Covina CA 91723 877-463-9029 877-263-9029
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Detent Pin MOD 545
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/6/2015
Quality System ISO9001:2008 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Consolidated Precision Products [Fomerly PAC Fo 705, 717, 725 Industrial
36775
Port Hueneme CA 93041 805-488-6451
Bill Fanner VP Operations
805-488-4129
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Ferrous & non-ferrous, Aerospace Quality, Precision investment castings.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/26/2015
AS9100C Yes NoYes
Yes NoNo
Monday, August 05, 2013 Page 27 of 111
Continental Heat Treating 10643 S. Norwalk Blvd.
67527
Santa Fe Sprin CA 90670 562-944-8808
Don Lowman, Quality Control Manager
562-944-1499
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Heat Treat
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/22/2016
NADCAP - Materials Testing Laboratories - Metallography AC7101/4 No NoNo
HEAT TREATING AS7003 No NoNo
BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
NADCAP Heat Treating AC7102 No NoNo
NADCAP - Carbuizing AC7102/3 No NoNo
Hardness Testing AC7102/5 No NoNo
Cook Induction Heating Co., Inc. 4925 E. Slauson Avenu
36462
Maywood CA 90270 323-560-1327
Keith Doolittle, President/Ron Winters, Quality Assurance.
323-562-3375
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Induction and furnace brazing, Induction heat treating
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/12/2015
NADCAP - AQS - Inspection and Test Quality System AC7004 N/A Yes NoYes
Induction Heat Treating AC7102 Yes NoYes
NADCAP - STANDARD FOR DISTRIBUTORS (HEAT TRE AC7102 Yes NoYes
INDUCTION ANNEALING 999-071 T/BRNZ & BRYLM CU Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
Induction Brazing and Furnace Brazing AC7102/1 Yes NoYes
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
HEAT TREAT, COPPER ALLOYS MIL-H-7199 Yes NoNo
NADCAP - Materials Testing Laboratories - Hardness AC7101/5 Yes NoYes
NADCAP - Brazing (Torch/Induction) AC7110/1 Yes NoYes
Rockwell Hardness (M2) Rockwell Hardness Yes NoYes
Monday, August 05, 2013 Page 28 of 111
CO-OPERATIVE INDUSTRIES 5133 NORTHEAST PAR
22604
FORT WORTH TX 76106 (817)624-4001
Tim Smith, Quality Control
(817)624-4284
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Design and manufacture industrial metal hose/conduit; PTFE conduit assemblies, flexible metal conduit assemblies, electrical wire harnesses and ingnition leads for the aerospace industry.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/20/2015
Quality System ISO9001:2008 No NoNo
Quality System AS9100:2009 No NoNo
Copper & Brass Sales (Fomerly TMX Copper) 13338 Orden Dr.
36466
Sante Fe Sprin CA 90670 800-926-2600
Chong Pak
800-926-8310
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Various metals and bar stock supplies.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/17/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
COPPER PREFORMS No NoNo
Cosmic Plastics, Inc. 28410 Industry Dr.
19932
Valencia CA 91355 800-423-5613
Edwin Luh, QA Manager/Lillian Luh, Steve Castro/
805-275-3345
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Thermoset molding compounds.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/28/2013
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
PLASTIC MOLDED OR EXTR. GOODS No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
COSMO CONNECTORS CORP 17320 Marquart Ave
TBD
Cerritos Ca 90703 562-404-0123 562-404-0123
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/21/2014
Quality System ISO9001:2000 No NoNo
Monday, August 05, 2013 Page 29 of 111
Crane Technology Co. Inc. 742 Hampshire Road, U
1923
Westlake Villag CA 91361 805-379-4948
Dale E. Crane, President Marsha Haik, General Manager
805-379-5256
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal fabrication.Waterjet Cutting & Manufacturing
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/2/2014
MACHINING GENERAL Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
CSL Operating, LLC 529 Aldo Avenue
38622
Santa Clara CA 95054 1-408-727-0893
Hemendra Gohil [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Chemical Processing and Selective Plating
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/6/2015
Passivation Treatments for Corrosion Resistant Steel AMS-QQ-P-35 No NoNo
Surface Treatment/Passivation AMS 2700 No NoNo
CHEMICAL CONVERSION COATINGS ON ALUMINUM A MIL-C-5541 No NoNo
NADCAP - Surface Preparation Prior to Metal Bond AC7108/3 No NoNo
Passivation Treatments for Corrosion Resistant Steel QQ-P-35 No NoNo
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM A MIL-A-8625 No NoNo
Surface Treatment/Passivation ASTM A 967 No NoNo
Electroless Plating Nickel AMS 2404 No NoNo
COATINGS, ELECTROLESS NICKEL AMS-C-26074 No NoNo
NICKEL PLATE, ELECTROLESS MIL-C-26074 No NoNo
Nickel Plating AMS 2403 No NoNo
NADCAP - Painting and Dry Film Coatings AC7108/1 No NoNo
Cutting Edge Manufacturing 3541 Old Conejo Rd #1
Cutting
Newbury Park CA 91320
Steve Elchyshyn 805-498-6535
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
CNC Machining - Website: www.cutting-edge-mfg.com
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/9/2015
Quality System AS9100B No NoNo
Monday, August 05, 2013 Page 30 of 111
D.B. Roberts 800 Del Norte Blvd.
23305
Oxnard CA 93030-8971 805-988-4882
Mark Harris, VP/GM/Tony Mortellaro, Q.A. Mgr.
805-988-1254
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
PEM Fasteners & related product lines.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/6/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Da/Pro Rubber 28635 N. Braxton Ave
50460
Valencia CA 91355 661-775-6290
Mike Elkins, Q.A.M./Gretchen Brauninger, Pres.
918-258-9386
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Rubber molded parts (Compression, Transfer, Insert and Injection).
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 7/19/2015
Quality System ISO9001:2008 No NoNo
Dameron Alloy Foundries (Formerly Precision Mic 927 So. Santa Fe Ave
P18102
Compton CA 90224 310-631-5165
Jeff Milucky VP Oper./ Lanny Notman Dir. QA
310-631-1979
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mfr. And machining of investment castings for the commercial market (iso exludes: 7.3- design control)
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/14/2016
Quality System ISO9001:2008 Yes NoNo
Nadcap - Welding AS7003 Yes NoNo
NADCAP WELDING / BRAZING AC7100 Yes NoNo
NADCAP - Welder/Welding Operator Qualification AC7110/12 Yes NoNo
NADCAP - Fusion Welding AC7110/5 Yes NoNo
Database Providers tdodge@databaseprovi
9999999
San Diego CA 92127 858-335-6421
Tim Dodge
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Vendor for the Access Databases and the Corrective Action Databases.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 7/26/2013
BASIC COOPER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 31 of 111
Day-Glo Color Corp. 4515 St. Clair
63455
Cleveland OH 44103 800-289-3294
Mary Taylor - [email protected]
216-391-3366
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Fluorescent Pigments, inks, bases, dyes and coatings
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/2/2016
ISO 9001:1998 No NoNo
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Dayton Rogers of California(Federal Stamping) 13630 Saticoy Street
26937
Van Nuys CA 91402 818-787-6670
Charles Frazer Quality Manager
818-373-7950
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacture of metal stampings, sheet metal fabrication, forming, tube forming, and assembly.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/12/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
PUNCH PRESS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoYes
Diamond Fasteners 20 B Commerce Drive
47189
Hauppauge NY 11788 631-694-2766
Angelo Aniano,[email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
"Distributor and value added manufacturer of standard & specialty fasteners, components,and electronic hardware for the commercial, aviation, space, and defense industries."
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/8/2015
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
AS9100C No NoNo
Quality System ISO9001:2008 No NoNo
Dicronite Dry Lube 1495 W 9th St. Suite 20
36495
Upland CA 91786 909-982-5100
Alvin Rhynard, Owner/Mary Flores, QC Manager/ Mark Bustamante
909-982-5166
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Dry film lubricant. Not approved pending Lockheed Sunnyvale approval. Sherry Wampler working on this. Requested new supplier survey from vendor.Approval from LM on 7/11/11 & added approval to folder. JB
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/20/2013
DRY FILM LUBE 999-146 Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
Monday, August 05, 2013 Page 32 of 111
DRY FILM LUBE DOD-L-85645 Yes NoNo
Quality System AS9100 Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
Quality System ISO9001:2008 Yes NoNo
Digi-key Corporation 701 Brooks Avenue So
8495
Thief River Fall MN 56701 800-344-4539 218-681-3380
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distribution of Electronic Components
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/21/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
MISCELLANEOUS ITEMS/SERVICES No NoNo
Diversified Images, Inc. 27955 Beale Court
36498
Valencia CA 91355 661-702-0003
Robert W. Waycott, President/ William C. Waycott, GM & QA Man
661-702-0006
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Silkscreening.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/29/2015
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
SILK SCRNG/ENGRVG/NAMEPLATING Yes NoNo
MARKING OF SILICONE RUBBER COMPONENTS 999-091-15 Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
Dixon Hard Chrome, Inc. 11645 Pendleton Street
36499
Sun Valley CA 91352 818-767-9650
Ron Dixon, President Bruce Rogers, QC Manager Larry Dixon, Inte
818-504-0969
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
On Boeing's AVL for MIL-C-26074 Electroless Nickel.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/29/2015
CADMIUM PLATING QQ-P-416 TYPE I,II No NoNo
CHEMICAL PROCESSING AC7108 No NoNo
No NoNo
ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR No NoNo
Monday, August 05, 2013 Page 33 of 111
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No NoNo
CHROMIUM PLATING QQ-C-320 CL 1, TYPE I, II No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
NADCAP- Standard Requirements AC7004 No NoNo
PENETRANT INSPECTION (MIL-I-6866) MIL-STD-686 No NoNo
MAGNETIC PARTICLE INSPECTION MIL-STD-1949 No NoNo
NICKEL PLATING QQ-N-290 ELECTRO DEPOSITED No NoNo
NICKEL PLATING MIL-C-26074 ELECTROLESS No NoNo
PASSIVATION QQ-P-35 TYPE II No NoNo
DPA Components International 2251 Ward Avenue
D00255
Simi Valley CA 93065 805-581-9200
Douglas Young, President
805-581-9790
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Testing services and failure analysis.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/10/2016
Quality System ISO9001:2008 No NoNo
Durkee Testing Laboratories, Inc. 15700 Texaco St.
37398
Paramount CA 90723 562-531-7111
John Durkee, President, Dwight Atchison QA Manager
562-531-7137
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Testing, destructive and salt spray.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/10/2016
NADCAP - Materials Testing Laboratories - Mechanical Tes AC7101/3 Yes NoYes
NADCAP - Materials Testing Laboratories - Metallography AC7101/4 Rev C Yes NoYes
NADCAP - Materials Testing Laboratories - General AC7101/1 Rev C Yes NoYes
NADCAP - Materials Test Laboratories - Corrosion AC7101/6 Yes NoYes
NADCAP - Materials Testing Laboratories - Chemical Testi AC7101/2 Yes NoYes
NADCAP - Mechanical Testing Specimen Preparation AC7101/7 Yes NoYes
NADCAP - Accreditation to ISO/IEC 17025 AC7006 Yes NoYes
NADCAP - Metallographic Evaluation of Welds AC7110/13 Yes NoYes
NADCAP - Materials Test Laboratories - Heat Treating AC7101/9 Yes NoYes
G & H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
NADCAP - Chemical Processing AC7108 Yes NoYes
NADCAP - Materials Testing Laboratories - Hardness AC7101/5 Rev 5 Yes NoYes
Monday, August 05, 2013 Page 34 of 111
E. Jordan Brookes & Co., Inc. 10634 Shoemaker Ave.
36511
Santa Fe Sprin CA 90670 562-968-2100
Robert J Brookes, President, Ken Winiecki QA Manager
562-968-2110
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor of copper alloy materials and engineered plasticsISO 9001:2000
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/6/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
E. V. Roberts 18027 Bishop Ave
36513
Carson CA 90746-4019 310 204-6159
Ron Cloud CEO, Douglas Scott VP Operations
310-202-7247
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor & Mfr of adhesives, Sealants, Coatings, Encapsulants, etc.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/21/2015
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
ADHESIVE Yes NoNo
COOPER BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
E/M Coating Services 6940 Farmdale Ave.
36515
North Hollywoo CA 91605 818-983-1952
Michael Steinberg, Div. Mgr./Tony Quiros, Quality Mgr.
818-765-1802
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Passivation, chem film, anodize, dry film lube.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes Yes Survey Due: 11/14/2014
MIL-P-23377 Yes YesYes
WS9425 CL IV, TYPE I, II, IV Yes YesYes
WS9004 Yes YesYes
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION I MIL-L-46010 TYPE I, II Yes YesYes
MIL-L-85645 Yes YesYes
WS20290 Yes YesYes
MIL-PRF-46010 Yes YesYes
MIL-PRF-81329 Yes YesYes
NADCAP - Chemical Processing AC7108 Yes YesYes
MIL-PRF-46147 Yes YesYes
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM A MIL-A-8625 Yes YesYes
MIL-PRF-22750 Yes YesYes
Monday, August 05, 2013 Page 35 of 111
Conversion/Phosphate Coating DOD-P-16232 Yes YesYes
MIL-L-81329 Yes YesYes
Quality System AS9100B Yes YesNo
Quality System ISO9001:2000 Yes YesNo
BASIC SUPPLIER QUALITY REQUIREMENTS Yes YesNo
Anodizing AMS 2472 Yes YesYes
ANODIZING - ALUMINUM MIL-A-8625 TYPE II-SULF (DY/UDY) Yes YesYes
Conversion/Phosphate Coatings AMS 2486 Yes YesYes
ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR Yes YesYes
Conversion/Phosphate Coating TT-C-490 Yes YesYes
Surface Treatment/Passivation AMS 2700 Yes YesYes
Passivation Treatments for Corrosion Resistant Steel AMS-QQ-P-35 Yes YesYes
Surface Treatment/Passivation ASTM A 967 Yes YesYes
Surface Treatment/Passivation ASTM A 380 Yes YesYes
SHOT PEENING MIL-S-13165 Yes YesNo
Conversion/Phosphate Coating AMS 2480 Yes YesYes
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION I MIL-L-8937 (WS17657) Yes YesYes
MIL-L-46147 Yes YesYes
MIL-L-23398 Yes YesYes
Anodizing MIL-A-63576 Yes YesYes
Chemical Films for Aluminum and Aluminum Alloys, Gener WS9030 Yes YesNo
ANODIZING - ALUMINUM MIL-A-8625 TYPE III CL(1) Yes YesYes
Anodizing AMS 2469 Yes YesYes
NADCAP - Painting and Dry Film Coatings AC7108/1 Yes YesYes
ANODIZING-TITANIUM AMS 2488 Yes YesYes
PASSIVATION QQ-P-35 TYPE II Yes YesYes
PASSIVATION/CLEANING MIL-S-5002 Yes YesNo
Anodizing AMS 2471 Yes YesYes
TEFLON BLACK 958-203 PER 999-191 REV. A 958-203 Yes YesNo
CADMIUM PLATING QQ-P-416 TYPE II Yes YesNo
Anodizing AMS 2468 Yes YesYes
EAS Manufacturing Co, Inc. 804 Via Alondra
83291
Camarillo, CA 93012 805-987-3665
Florin Banu, [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Precision Machine Shop
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/12/2015
BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 36 of 111
Eaton Aeroquip 2350 EAST AVE PLANT
36508
JACKSON, MI 49203 520-294-3491 520-294-6169
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 3/24/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEMS FOR PRODUCTION ISO-9002 No NoNo
Ed Fagan, Inc. 10535 HUMBOLT ST
36519
Los Alamitos CA 90720 800-782-9657
Ronald E. Stiles, Operation Mgr./Kevin Dillion, Quality Control.
562-598-7122
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distribution of specialty metal alloys
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/2/2016
Quality System ISO-9001:2008 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
EL-Com/Cabletek 12691 Monarch St.
36524
Garden Grove CA 92841 714-230-6100
Elie Vrobel, President/Bary Luke, VP Operations.
714-230-6110
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
EMI/RFI Shielding gaskets; cable harnesses & sub-assemblies; O-rings
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/11/2015
Quality System ISO9001:2000 No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
EMI AND RFI SHIELDING No NoNo
GASKETS No NoNo
Electro Adapter, Inc. 20640 Nordhoff Street
36526
Chatsworth CA 91311 818-998-1198
Marco (Tony) Quiros, QC Manager John Smith, QA Manager
818-709-5773
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal finishing, connectors, die castings and plating services.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 10/13/2014
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
CONN.PARTS(HOOD,B/SHELLSETC) Yes NoNo
Monday, August 05, 2013 Page 37 of 111
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
NICKEL PLATING MIL-C-26074 ELECTROLESS Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
MAGNAFORMING Yes NoNo
Electrochem Solutions, LLC 32500 Central Ave
38803
Union City CA 94587 510-476-1840
David Rossiter, Pres./CEO
510-476-1852
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Processor for Precision Resource
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/29/2015
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Electron Beam Welding Inc. 6940 Hermosa Circle
36529
Buena Park CA 90620 714-670-9119
Larry Sato, Quality Manager & President
714-522-0926
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Electron Beam Welding
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/14/2016
Electon Beam Welding AC7110/3 Yes NoYes
FSN WLDG STEEL & SUPER ALLOYS (EBW) MIL-W-46132 Yes NoNo
NADCAP- Standard Requirements AC7004 Yes NoNo
INSPECTION SYSTEM REQUIREMENTS (NASA) NHB 5300.4(1C) Yes NoNo
NADCAP - Electron Beam Welding AC7110/3 Yes NoYes
QUALITY SYSTEMS FOR PRODUCTION ISO-9002 Yes NoNo
NADCAP - Welder/Welding Operator Qualification AC7110/12 Yes NoYes
WELDING/BRAZING AC7110 Yes NoYes
NADCAP - Metallographic Evaluation of Welds AC7110/13 Yes NoYes
FSN WLD (ALL) MIL-STD-1595 Yes NoNo
FSN WLDG STEEL & SUPER ALLOYS 999-056 EBW Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
FSN WLD (ALL) (EBW) 999-056 Yes NoNo
FSN WLD ALM,MAG,TT&ALM-BRYLM (EBW) MIL-W-46132 Yes NoNo
Monday, August 05, 2013 Page 38 of 111
Environment Associates Inc. 9604 Variel Avenue
36538
Chatsworth CA 91311 818-709-0568
William L. Spaulding, President/William Fenimore, Q.A. Mgr.
818-709-8914
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Environmental testing services.ISO/IEC 17025:2005
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/26/2015
ISO/IEC 17025:2005 Yes NoNo
RAIN MIL-STD-810 Yes NoNo
General Requirements for the Competence of Testing ISO/IEC 17025-2005 Yes NoNo
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 Yes NoNo
Thermal MIL-STD-883 Yes NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
COOPER BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Epoxy Technology Inc. 14 Fortune Drive
36542
Billerica MA 01821 978-667-3805
Cindy Armstrong, QA Mgr.
978-663-9782
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Design, Manufacture and Supply of Epoxy Resins and Adhesives.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/6/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Everlube Products (Fomerly E/M Corporation) 100 Cooper Circle
36546
Peachtree City GA 30269 1-800-428-7802 770-261-4805
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Lubri-Bond B
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/30/2015
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 39 of 111
Experior Photonics 1635 Ives Avenue
68033
Oxnard CA 93033 (805)483-3400
Lorenz Cartellieri
(805)483-5484
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Qualification testing services. Photonic/Fiber Optic instrument calibration service. Mechanical, Enviromental,& Optical testing
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/13/2015
Mechanical, Enviromental,& Optical testing ISO TS 17025:2008 No NoNo
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Falmat, Inc. 1873 Diamond St
14958
San Marcos CA 92078 760-471-5400
Claire Gilbert, QA Manager; Brian Falk, President
760-471-4970
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Custom Manufactured cable and cable assemblies. Distributor of wire
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/6/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662 No NoNo
SAMPLING PROCEDURES AND TABLES MIL-STD-105 No NoNo
Quality System ISO9001:2000 No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208 No NoNo
Fam Cam, Inc. 650 Atlantis Rd.
36551
Melbourne FL 32904 321-724-0650
Christene Low /Chan Bhate, QA Manager
321-724-0081
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machine parts.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/12/2013
MACHINING GENERAL No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
Monday, August 05, 2013 Page 40 of 111
Farad Industries, Inc. 20435 Grammercy Plac
36552
Torrance CA 90501 310-320-4260
Fred Bayer, QA Mgr.
310-320-6968
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Vacuum Impregnation
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/19/2015
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
Fast Lane Precision 2220 Eastridge Ave Ste
63177
Riverside CA 92507 951-653-5660
Kathleen Jurls, Q.C. Mgr./Barry Kitchen, Owner
951-653-3714
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Fasteners/Hardware, Connectors, Cable Assemblies, Electrical parts and components, Raw stock
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/5/2016
BASIC QUALITY SYSTEM REQUIRMENTS No NoNo
Fralock Div. Of Lockwood Industries, Inc 28525 West Industry Dr
36561
Valencia CA 91355 661-702-6999
Noel Tucker, President Gilberto Resendiz, Quality Control Manager
661-702-9899
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Converter and distributor of thin films, foams, foils, adhesives and cirlex.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/29/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
Fry Steel Company 13325 Molette Street
36563
Santa Fe Sprin CA 90670 562-802-2721
Stephen Fry, President/CEO Bunny Isaka, QA Manager
562-802-1553
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Wholesale distribution of Steel Bars, Brass, Nickel-Aluminum-Bronze, and Aluminum.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/16/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
QUALITY SYSTEMS FOR PRODUCTION ISO-9002 No NoNo
MISCELLANEOUS ITEMS/SERVICES No NoNo
Monday, August 05, 2013 Page 41 of 111
G. F. Cole Corp. 21735 Western Ave.
36565
Torrance CA 90501 310-320-0601
Fritz Cole V.P.
310-320-1520
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Non-Matalic Gaskets and Materials.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/6/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Quality System ISO9001:2008 Yes NoNo
Galaxy Brazing Co., Inc. 10015 Freeman Avenue
36567
Santa Fe Sprin CA 90670 562-946-9039
Donna McKee, Quality Assurance Manager/Vladimir Sapaner, QA
562-946-5511
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Brazing, welding, soldering & heat treating.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
Brazing (Torch/Induction) Brazing AC7110/1 No NoYes
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
DIP BRAZE MIL-B-7883 TYPE II, ALUM No NoNo
NADCAP - AQS - Inspection and Test Quality System AC7004 No NoYes
RESIST. WLDG ALM,MAG & TT MIL-W-6858 No NoNo
FSN WLD ALM,MAG,TT&ALM-BRYLM (GTAW) MIL-STD-2219 No NoNo
RESIST.WLDG STL & SUPER ALLOY (SEAM & SPOT) G MIL-W-6858 No NoNo
G&H Basic Supplier Quality Requirements No NoNo
Fusion Welding AC7110/5 No NoYes
DIP BRAZE MIL-B-7883 TYPE V, ALUM No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
NADCAP- Standard Requirements AC7004 No NoYes
WELDING/BRAZING AC7110 No NoYes
General Aircraft Company 321 Kinetic Drive
36575
Oxnard CA 93030 805-983-8500
William Hutchins, President Raymond Matthies, QC Manager
805-983-8550
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor of Commercial and Electronic hardware.QUEST Supplier 1/07
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
Pending SurveyG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 3/12/2014
FASTENERS PROCESSING Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Monday, August 05, 2013 Page 42 of 111
General Cable Industries Inc. 1600 West Main Street
7393
Williamantic CT 06226 860-456-8000
Lawrence Cunningham
860-465-8869
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/27/2013
Quality System ISO9001:2000 No NoNo
General Electric (General Electric Nuclear Energ 6705 Vallecitos Rd.
36577
Sunol CA 94586 925-862-4383
Gaby , Quality Program Mgr.-VNC site/Edward Ehrlich, Quality/Kell
925-862-4380
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Neutron radiography services ISO Compliant Did not renew certs,
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/8/2015
NEUTRON RADIOGRAPHY AS APPLICABLE No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
General Metal Finishing 134 Center St.
47554
El Segundo CA 90245 (310)414-4000
David Slater, Pres.
(310)414-4001
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Approval for processing of these part numbers only:6100-0212-002 6100-0226-000
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/28/2015
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Gerhardt Gear Co., Inc. 133 E. Santa Anita Ave
37247
Burbank CA 91502-1926 818-842-6700
Ronald Gerhardt, President Fritz Gerhardt, VP of Quality Zack You
818-842-1458
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacture gears custom parts.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/6/2013
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
QUALITY SYSTEMS FOR PRODUCTION ISO-9002 No NoNo
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No NoNo
GEARS/JACK SCREWS No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 43 of 111
Glenair, Inc. 1211 Air Way
5811
Glendale CA 91201 818-247-6000
Gary Carr, QA Manager
818-500-9912
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Connector accessories.MISCELLANEOUS ITEMS/SERVICES
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/7/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Quality System ISO9001:2008 No NoNo
Global Silicones 49 Industrial Way
66535
Buellton CA 93427 805-686-4500
Kim Speceiro
805-686-4501
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Silicones
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/13/2013
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Graphic Controls Corporation 400 Exchange Street P
36588
Buffalo NY 14240-1271 716-853-7500
Ken Jablonicky, QA Manager; John Bellott, VP Manufacturing
716-847-7520
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Recording Charts and Supplies
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/8/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Gravograph New Hermes 2200 NORTH MONT PA
36589
DULUTH GA 30096 800-843-7637
Jacquelen Friery, Quality
800-533-7637
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Engraving Materials & Machines
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/12/2013
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 44 of 111
GREEN WORLD TECHNOLOGIES 20710 MANHATTAN PL
58911
TORRANCE CALI 90501 310-774-0919 310-783-0083
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/7/2014
G&H BASIC SUPPLIER QUALITY REQUIREMENTS KS Q ISO 9001:2009/ISO 9001:2008 No NoNo
Groov-Pin Corporation 59 Beaverbrook Road,
37248
Linclon Park NJ 07035 973 988-4666
Scott Bunn, Plant Manager
201-933-8902
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacture of Metal Fasteners
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 2/3/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
H.S.G Manufacturing 13346 Monte Vista Ave.
46912B
Chino CA 91710 909-902-5915
Gill Singh
909-594-9335
909-594-9335
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/8/2015
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Hales Engineering Co., Inc. 18 Wood Road
36596
Camarillo CA 93010 805-484-2736
Billy Belcher, Quality Manager
805-987-5590
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machine Shop.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/27/2013
MACHINING GENERAL No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
Monday, August 05, 2013 Page 45 of 111
Hawk Electronics 511 Glenn Ave.
59571
Wheeling IL 60090 800 843-4295
Ken Thomson QM [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
We buy in bulk and sell in pieces.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
Quality System ISO9001:2008 No NoNo
HCC Machining Corp. (Div. of Hermetic Seal) 4501 Arden Drive
37563-1
El Monte CA 91731 626-443-8931
Monica Gonzalez, Quality Manager / Harminder Badesha, Quality
626-443-6610
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machining operations solely for and owned by Hermetic Seal Corporation
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/16/2016
BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Quality System ISO9001:2008 No NoNo
Heat Bath Corp. 107 Front Street
23399
Indian Orchard MA 01151 413-452-2000 413-543-2378
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Custom Metal Finishing, Heat Treating and Cleaning Chemicals MISCELLANEOUS ITEMS/SERVICES
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/6/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Henkel (Frmly: Emerson & Cuming) 20021 Susana Road
46912
Rancho Domin CA 90221 310-764-4600
James C. Richards (President), Andy Glosecki (Director of Quality),
310-605-2284
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Adhesives, encapsulants and coatings.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/12/2015
Quality System ISO9001:2008 No NoNo
Monday, August 05, 2013 Page 46 of 111
Henkel Corporation (2) 46 Manning Rd
7217
Billerica MD 01821
Brian Betti
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Adhesives,Encapsulants, and Coatings
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/12/2015
Quality System ISO9001:2000 No NoNo
Quality System AS9100B No NoNo
Hermetic Seal Corporation 4232 Temple City Boule
37563
Rosemead CA 91770 626-443-8931
Monica Gonzalez, Quality Manager / Harminder Badesha, Quality
626-443-6610
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Design and Manufacture of Hermetically sealed products.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/16/2016
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
GLASS & GLASS TO METAL SEALS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Hixson Metal Finishing 829 Production Pl.
36600
Newport Beach CA 92663 949-645-4800
Dave Greene, President/Mark Soward, Q.C. Mgr.
949-645-9043
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal finishing.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes Yes Survey Due: 11/6/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes YesNo
COATINGS WS 17657 E/F #5306 Yes YesNo
NADCAP - Etch Processes (Blue Etch Anodize, Local, Mac AC7108/2 Yes YesYes
Quality System ISO 9001:2008 Yes YesNo
NADCAP NonDestructive Testing AC7114 Yes YesYes
BARRELL FINISH Yes YesNo
NADCAP - Chemical Processing AC7108 Yes YesYes
SAND BLASTING Yes YesNo
Chemical Processing AS7003 Yes YesNo
NADCAP - Painting and Dry Film Coatings AC7108/1 Yes YesYes
COATINGS 999-034 E/F#4396 Yes YesNo
NADCAP NonDestructive Testing - Penetrant AC7114/1 Yes YesYes
Monday, August 05, 2013 Page 47 of 111
NADCAP - Surface Preparation Prior to Metal Bond AC7108/3 Yes YesYes
ALUMINUM CONVERSION COATING WS 9030 CHEMFILM TYPE I (LMSC) Yes YesNo
ACID PICKLE Yes YesNo
NICKEL PLATING 999-310 Yes YesNo
NADCAP NonDestructive Testing - Magnetic Particle AC7114/2 Yes YesYes
Quality System ISO9001:2008 Yes YesNo
NADCAP - AQS - Inspection and Test Quality System AC7004 Yes YesYes
Quality System AS 9110:2009 Yes YesNo
HMC Electronics 33 Springdale Ave
4785
Canton MA 02021 781-821-1870
Kathy Heffernan, [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
tools, test equipment and supplies for the Electronics Industry
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/19/2015
BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Homer R. Dulin Company 729 E Willow Street
D15752
Signal Hill CA 90755 562-424-8533
Ronald H. Dulin, President/QA Manager
562-426-7707
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Pneumatic and hydraulic flowmeter calibration service.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/12/2016
BASIC SUPPLIER REQUIREMENTS No NoNo
Honeywell Sensotec 2080 Arling Gate Lane
4237
Columbus OH 43228 614-850-5000 614-850-1111
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Calibration of Load Cells.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 7/6/2013
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 48 of 111
Houston Rubber Co., Inc. 12623 Foothill Boulevar
36608
Sylmar CA 91342 818-899-1108
Thane Fang Neely, QA Manager & President.
818-899-1108
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Custom molded rubber products.RUBBER MOLDED GOODS
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/7/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Hudson Plating Works 11941 Hertz St.
36609
Moorpark CA 93021 805-517-1222
David Hudson President, Joseph Gonzales QA Manager
805-517-1224
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal finishing
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No Yes Survey Due: 11/8/2015
TIN PLATING MIL-T-10727 TYPE I No YesYes
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No YesNo
NADCAP - AQS - Inspection and Test Quality System AC7004 No YesYes
COPPER PLATE, ELECTRODEPOSITED MIL-C-14550 No YesYes
NICKEL PLATING MIL-C-26074 ELECTROLESS No YesYes
Electroless Plating Nickel AMS 2404 No YesYes
GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 TYPE I, CL 1 No YesYes
Silver Plating QQ-S-365 SILVER No YesYes
PASSIVATION QQ-P-35 TYPE II No YesYes
NADCAP Chemical Processing AS7003 No YesYes
Copper Plating AMS 2418 No YesYes
Electroless Plating Nickel AMS 2405 No YesYes
Plating, Tin-Lead (Electrodeposited) NADCAP Alloy Plating MIL-P-81728 No YesYes
NICKEL PLATING QQ-N-290 ELECTRO DEPOSITED No YesYes
Silver Plating ASTM B 700 No YesYes
Nickel Plating AMS 2424 No YesYes
Tin Plating ASTM B 545 No YesYes
Tin Plating AMS 2408 No YesYes
Gold Plating AMS 2422 No YesYes
Surface Treatment/Passivation ASTM A 380 No YesYes
Silver Plating AMS 2412 No YesYes
Silver Plating AMS 2411 No YesYes
Silver Plating AMS 2410 No YesYes
Gold Plating AMS 2425 No YesYes
Nickel Plating AMS 2423 No YesYes
Monday, August 05, 2013 Page 49 of 111
Nickel Plating AMS 2403 No YesYes
Nickel Plating MIL-P-27418 No YesYes
Huntington Park Rubber Stamp 2761 E. Slauson
36612
Huntington Par CA 90255 323-582-6461
Mary Barlam, Pres/Robert Barlam, VP
323-582-8046
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Rubber Stamps. Hard polymer (steel backed) imprinting plates, rubber stamps, industrial marking inks, inspection stamps, engraved nameplates and interior sign age and a variety of marking and identification products.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/2/2016
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Independent Ink, Inc. 14705 So. Avalon Blvd.
48053
Gardena CA 90248 310-523-9935
Sean Goody (Plant Manager), Barry Brucker (President), Ramesh
310-523-9961
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
G&H Basic Vendor Quality Requirements
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 2/15/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Industrial Tectonics 7222 W. Huron River
7093
Dexter MI 48106 (734)426-4681
Douglas nummerdor Oper Mgr / Lisa Bernhardt QA Eng.
(734)426-4701
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Custom manufactured spherical products and high precision balls of various materials.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM REQUIREMENTS (AUTOMOTIVE IND QS-9000 No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
Quality System ISO9001:2000 No NoNo
Insulation Supply Co. 1901 Harpers Way
36626
Torrance CA 90501 310-320-9400
Bob Foster, CEO James Short, QA Manager
310-533-0783
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor of electromechanical components, Adhesives, Tapes. Heat shrinkable Tubing. QUEST 8/06
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/6/2015
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
Monday, August 05, 2013 Page 50 of 111
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Quality System ISO9001:2000 No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
CUTTING AND MARKING No NoNo
Interconnect Devices, Inc. 5101 Richland Ave
36628
Kansas City KS 66106 913-342-5544 913-281-4628
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Probe springs.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 6/1/2013
ISO18001 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
ISO-9001:2008 No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
Design, Manufactor, and Sell ISO14001 No NoNo
J. R. Industries 31280 La Baya Drive
4585
West Lake Villa CA 91362 818-706-2424
Gary Becker, Acting Q.A. Manager
818-707-3347
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distribution of electronic hardware including MIL-SPEC fasteners, custom fittings and contract assembly. .
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 10/13/2014
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
Jack C. Drees Grinding Co., Inc. 11815 Vose Street
36638
No. Hollywood CA 91605 818-764-8301
Jack C. Drees, Owner
818-764-4896
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Precision flat grinding & lapping.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/10/2015
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
PRECISION GRINDING Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Monday, August 05, 2013 Page 51 of 111
Jim's Machining 555 Dawson Drive
42215
Camarillo CA 93010 805-482-6913
QA Manager, Gian Morehead, President, Jim Thiessen
805-482-7422
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machining of G&H supplied materials
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/8/2013
MACHINING CNC MILLING No NoNo
PRECISION GRINDING No NoNo
MACHINING CNC TURNING No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Johnson Manufacturing Company 114 Lost Grove Road
3209
Princeton IA 52768 1-800-747-0030
Alan Gickler, President David M. Brown, Chief Engineer F. (Larry) L
563-289-3825
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machining services. Supplier of solder and flux, silver solder.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/29/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Johnson Products Inc. (Frml. Johnson Precision 149 La Porte Street
63453
Arcadia CA 91006 626-445-1411
Sam LaPorte
626-445-3095
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 7/8/2013
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208 No NoNo
K & L Anodizing Corporation 1200 S. Victory Bouleva
36652
Burbank CA 91502 818-845-7251
Don Leiker, President Troy Slavin, QC Manager Dana Schlumpber
818-845-0650
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Anodize, Chem-film, passivation, silkscreeen, laser part marking.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/29/2015
ANODIZING - ALUMINUM MIL-A-8625 TYPE III - HARD No NoNo
PASSIVATION/CLEANING MIL-S-5002 No NoNo
Monday, August 05, 2013 Page 52 of 111
PASSIVATION QQ-P-35 TYPE II No NoNo
CHEMICAL PROCESSING AC7108 No NoYes
ANODIZING - ALUMINUM MIL-A-8625 (1) TYPE I-CHRMIC(DY/UDY) No NoNo
ANODIZING - ALUMINUM MIL-A-8625 TYPE II-SULF (DY/UDY) No NoNo
NADCAP- Standard Requirements AC7004 No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
K. R. Anderson, Inc. 18330 Sutter Blvd.
36653
Morgan Hill CA 95037 408-825-1800
Dennis Wagner, President/Johnny, Manager.
408-778-2802
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Procurement of Chemicals, Sealants & Adhesives.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 10/16/2015
INK, MARKING, EPOXY MIL-I-43553 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
KCB Precision 29009 AVE PENN
44533
Valencia CA 91355 661-295-5695
Kenny Bayer, Pres. & GM/Rosali, Q.C. Mgr.
661-295-5772
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Swiss Screw Machine Parts, Contact pins & sockets, Thermocouple contacts, Sealing Plugs, Fasteners, etc.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 7/27/2013
COOPER SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
Kerley Corporation 3508 Ocean View Blvd.
36662
Glendale CA 91208 818-248-4783
Chris Kerley, President/Gary Johnson, Vice President
818-248-1472
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Supplier of equipment for inspection and calibration. Metrology Distributor of high precision inspection equip.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 9/21/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 53 of 111
Kirkhill Rubber Co. 300 E. Cypress Street
36663
Brea CA 92821 714-529-4901
Hugo Rubio, Quality Director/Sylvia Cuff, Sr. Inspector
714-529-6584
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Eng. Elastomers, Custom Rubber Parts & Products. Mfr of customer designed elastomer products, PMA aircraft seals.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
Survey ExpiredG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/20/2012
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
Quality System ISO9001:2000 No NoNo
RUBBER MOLDED GOODS No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
Kitch Engineering 12455 Branford St., Uni
36664
Arleta CA 91331 818-897-7133
Steve Kitching, President, Patrora J. Brown, QA Manager
818-897-7623
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacture machine parts.CNC milling, CNC turning
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/17/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
SMPLG PROC. & TBLS BY VAR. FOR % NON-CONF. ANSI/ASQC Z1.9-1993 Yes NoNo
MACHINING CNC MILLING Yes NoNo
MACHINING CNC TURNING Yes NoNo
L & A Plastic Molding, Inc. (LaContainer) 24895 E. La Palma Ave
36668
Yorba Linda CA 92887 714-694-0202
Jeff, Quality Mgr.
714-694-0400
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Plastic molding
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
PLASTIC MOLDED OR EXTR. GOODS No NoNo
Monday, August 05, 2013 Page 54 of 111
L. A. Gauge Co., Inc. (wasTriumph Precision) 7440 San Fernando Ro
36965
Sun Valley CA 91352 818-767-7193
Guillermo Olmedo, QA Manager
818-767-4946
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mfr. And supplier of utlra-precision machine components/fabricator of exotic materials such as Beryllium, AlBeMet, Berylcast, Inconel, and many other materials.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/16/2013
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEMS FOR PRODUCTION ISO-9002 Yes NoNo
MACHINING EXOTIC MATERIAL Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 Yes NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes NoNo
L.C. Miller Company 717 Monterey Pass Roa
48566
Monterey Park CA 91754 323-268-3611
Dave Vito
323-264-3203
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Flow switches, induction heating equipment, vacumn tweezers, services machining metal, EDM, ultrasonic machining, annealingm brazing, soldering.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/26/2016
Basic supplier requirements No NoNo
Lee Spring Co. 140 58th Street
25619
Brooklyn NY 11220 718-236-2222
Peter Giosa, President / Elvis Jarvis, QA Manager Rita & Cindy, Sp
718-236-3919
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
ISO 9001-2000 for design, manufacture and distribution. Manufacturer of springs and wire forms. Special processes in-house; passivation, heat treating and plating.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/8/2015
Quality System ISO9001:2008 No NoNo
G&H BASIC QUALITY SYSTEM MIL-687/AMS 2750 No NoNo
Monday, August 05, 2013 Page 55 of 111
Limon's Metal Finishing 334 Winchester Dr.
ST136596
Oxnard Ca 93036 805-983-1633 805-278-4123
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Sub-Tier vendor for Hales Engineering
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/24/2014
Passivation Treatments for Corrosion Resistant Steel QQ-P-35 No NoNo
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM A MIL-A-8625F No NoNo
CHEMICAL CONVERSION MATERIALS MIL-DTL-5541 No NoNo
Long-Lok Fasteners Corp. 10630 Chester Road
20861
Cincinnati OH 45215 310-675-9500
Aaron Dollenmeyer, QC Manager
310-675-9100
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Self-locking & self-sealing fasteners.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 2/23/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
FASTENERS PROCESSING No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
LOOS & COMPANY (Cableware Division) 901 Industrial Blvd.
36684
Naples FL 34104 800-321-5667
Anthony Naines President, Dan Broughton Director QA
239-643-4558
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mfr and Dist of cable hardware, cable products and equipment, cable assemblies and related products. MS, AN and NAS hardware and related equipment.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/2/2016
Surface Treatment/Passivation ASTM A 967 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
LTD Technology (formerly: So. Coast Mfg. Co. 2630 Lavery Court Suit
36686
Newbury Park Ca 91320 805-480-1886
Lonny Deboisblanc, President
805-376-9081
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Passivation, Chem Film, Machining, Electronic Assys, Wire Harnesses. Chromate conversion coating (chem-film) of aluminum
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/15/2015
Monday, August 05, 2013 Page 56 of 111
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
PASSIVATION QQ-P-35 TYPE II No NoNo
MIL-C-45662 No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208 No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 No NoNo
PASSIVATION/CLEANING MIL-S-5002 No NoNo
LUCAS MILHAUPT INC - KANBAN 5656 SOUTH PENNSYL
23029
CUDAHY WI 53110-2453 414-769-6000 414-769-1382
Process:
Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
The MFR of brazing and soldering filler metals, in the form of bulk strip and wire, preformed strip and wire, pastes, powders, fluxes and other metal products. This exludes the chemical laboratory and contractual technical services which are provided for training and product applications.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 3/16/2013
G & H BASIC QUALITY REQUIREMENTS No NoNo
QUALITY MANAGEMENT SYSTEM ISO9001:2008 No NoNo
M and M Fasteners, Inc. 7668 SAN FERNANDO
58160
SUN VALLEY CA 91352 818-767-8833
Paul Jensen VP CEO, John Cox VP QC Manager
818-767-8855
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor Only
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/15/2016
G & H BASIC QUALITY REQUIREMENTS No NoNo
Quality System ISO9001:2000 No NoNo
M.J. Stewart 840 G. St.
46977
Burnwell NE 68823 781-829-4440
Michael Stewart, President
781-829-4444
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Underwater Electrical Connectors
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/27/2013
Quality System ISO9001:2008 No NoNo
Monday, August 05, 2013 Page 57 of 111
Mach-Dynamics 494 Main Street
36688
Susquehanna PA 18847 775-278-9308 775-599-4585
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Purchasing grease
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/21/2015
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Magnetic Inspection Laboratory 1401 Greenleaf Ave
62428
Elk Grove Villa IL 60007-5522 847-437-4488
Robert L. Schiewe, President
847-437-4538
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
NDT, Chemical Processing & Dry film Coating For Smalley Steel Ring
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2013
see SAP # 59 for approved scope No NoNo
March Electronics 25 Feldland St.
36690
Bohemia NY 11716 631-563-6000
John Villardi, PRESIDENT
631-563-6015
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Representative for our products to our customers.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/20/2013
Quality System ISO9001:2000 No NoNo
MISCELLANEOUS ITEMS/SERVICES No NoNo
Quality System AS9100C No NoNo
Markem-Imaje Corporation 150 Congress Street
6926
Keene NH 03431 800-258-5356
Steve Buswell Quality Engineer
800-435-2923
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Design, manufacture, distribution and service of industrial In-Plant Printing Systems and supplies used to identify and decorate products of industry. Please look at Markem-Image Standard Ink Policy on file for more standard processes they meet.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/28/2015
MISCELLANEOUS ITEMS/SERVICES Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
INK, MARKING, EPOXY BASE MIL-I-43553 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Monday, August 05, 2013 Page 58 of 111
Master Bond,Inc. 154 Hobart St.
74947
Hackensack NJ 07601 201-343-8983 201-343-2132
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
This vendor supplies "sole source" age sensetive Epoxy Adhesive.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 2/5/2016
Cytotoxicity Requirement ISO 10993-5 No NoNo
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
MAXI-BLAST INC. 3650 N OLIVE ROAD
17550
SOUTH BEND IN 46628 800-535-3874 574-234-0792
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Vendor provides fine sand material for sand blasting. Parts do not go into Cooper product.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/7/2013
Quality System ISO9001:2008 No NoNo
Maya Manufacturing 43214 Blackdeer Loop
36696
Temecula CA 92592 951-296-3020
George Maya, Owner/Isaac Maya, Quality Control
951-296-3021
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal stamping.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 7/8/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
McBain Instruments 2665 Park Center Drive.
36698
Simi Valley CA 93065 818-998-2702
Frank Goncharow, Q.C. Mgr.
805-581-6801
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Microscopes, vision systems, sales, service, repair, calibration.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 8/23/2013
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
CALIBRATION No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 59 of 111
McDonald Packaging, Inc. 27601 So. Garnsey St.
36700
Santa Ana CA 92707 714-755-3000
Jim McDonald President Miguel Alcala
714-755-3030
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Packaging supplies. Corrugated packaging Foam Fabricator and Wood
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/20/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
McGee Industries, Inc. 9 Crozerville Road
66746
Aston PA 19014 610-459-1890
Gordon White, Tech. Dir./Edward L. McClatchy, Jr., Pres.
610-459-9538
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Industrial lubricants and release coatings
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/28/2015
QUALITY SYSTEM REQUIREMENTS ISO 9001:9008 No NoNo
G&H BASIC QUALITY SYSTEM REQUIRMENTS No NoNo
McMaster-Carr Supply Company 9630 Norwalk Blvd
923
Santa Fe Sprin CA 90670 562-692-5911
Sanjiv Shah, Sales
562-695-2323
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor of over 480,000 industrial supplies.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/29/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Metal Plasma Technology 27525 Newhall Ranch R
49268
Valencia CA 91354 661-257-1933
Andrew R. Velasco, QA Manager, A.B. Kassir, General Manager
661-257-1936
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
ION/Plasma Nitriding
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 7/26/2013
NADCAP Heat Treating AC7102 No NoYes
NADCAP - Nitriding AC7102/4 No NoYes
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
NADCAP - Materials Testing Laboratories - Metallography AC7101/4 No NoYes
NADCAP - AQS - Inspection and Test Quality System AC7004 No NoYes
NADCAP - Materials Testing Laboratories - Hardness AC7101/5 No NoYes
Monday, August 05, 2013 Page 60 of 111
Metal Surfaces Inc. 6060 Shull Street
36706
Bell Gardens CA 90201 562-927-1331
Donald Brown, President/ Paul Horgan, Quality Director/ Angel Dur
562-927-0692
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
General plating services.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No Yes Survey Due: 12/13/2015
NICKEL PLATING MIL-C-26074 ELECTROLESS No YesYes
NADCAP - Chemical Processing AC7108 No YesYes
ACID PICKLE No YesNo
ELECTRO PLSHNG CRS WS 11745 No YesNo
TIN PLATING MIL-T-10727 TYPE I No YesYes
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No YesNo
GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 TYPE I, CL 1 No YesYes
PRECIOUS METAL PLATING MIL-R-46085 RHODIUM No YesYes
PRECIOUS METAL PLATING QQ-S-365 SILVER No YesYes
PASSIVATION/CLEANING MIL-S-5002 No YesNo
PASSIVATION QQ-P-35 TYPE II No YesYes
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No YesNo
Model for Aerospace Quality Assurance Systems AS9100 No YesNo
ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR No YesNo
ALUMINUM CONVERSION COATING WS 9030 CHEMFILM TYPE I (LMSC) No YesNo
LIQUID HONING No YesNo
CADMIUM PLATING QQ-P-416 TYPE I,II No YesYes
CADMIUM PLATING QQ-P-416 TYPE I, II, III No YesYes
COPPER PLATING MIL-C-14550 No YesYes
VAPOR HONING No YesNo
APPL. CHEMFILM - BERYLLIUM WS 11753 No YesNo
COPPER PLATING AMS 2418 No YesYes
NICKEL PLATING QQ-N-290 ELECTRO DEPOSITED No YesYes
Metallurgical Processing, Inc. 68 Arthur St.
100219
New Britain CT 06050
Terry Chadwick
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/5/2015
NADCAP Aluminum Heat Treating AC7102/2 No NoNo
NADCAP Heat Treating AC7102 No NoNo
NADCAP - Brazing AC7102/1 No NoNo
Monday, August 05, 2013 Page 61 of 111
NADCAP - Carbuizing AC7102/3 No NoNo
NADCAP - Materials Testing Laboratories - Metallography AC7101/4 No NoNo
NADCAP - Materials Testing Laboratories - Chemical Testi AC7101/2 No NoNo
NADCAP - Carbuizing AC7102/3 No NoNo
NADCAP - Materials Testing Laboratories - Metallography AC7101/4 No NoNo
Quality System ISO9001:2008 No NoNo
Nitriding AMS 2759/6 No NoNo
NADCAP - Mechanical Testing Specimen Preparation AC7101/7 No NoNo
Metalmart International, Inc. 5828 Smithway St.
36705
Commerce CA 90040 562-692-9081
Pat Corless, QM
562-699-6868
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
All hard to find material. Largest stock magnesium distributor in the world.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/6/2015
Quality System ISO9001:2008 Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes NoNo
Quality System AS9100C Yes NoNo
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 Yes NoNo
Metals Testing Co. 80 Kimberly Dr
C31012D
South Windsor CT 06074 860-289-8225
Used by Continental Machine Tool Co., Inc.
860-289-5970
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Inspection and Testing & Chemical Processing
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/8/2015
NADCAP NonDestructive Testing AC7114 No NoNo
Etching process AC 7108/2 No NoNo
Chemical Processing AC7180 No NoNo
NADCAP - AQS - Inspection and Test Quality System AC7004 No NoYes
NADCAP Quality System AS7003 No NoNo
Micro Quality Calibration 20743 Marilla St.
36709
Chatsworth CA 91311 818-701-4969
Kanie, Owner & President
818-341-9109
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Calibration.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/7/2015
Monday, August 05, 2013 Page 62 of 111
Quality System ISO9001:2008 No NoNo
ISO 17025:2005 No NoNo
Calibration A2LA No NoNo
MIL (Magnetic Inspection Laboratory 1401 Greenleaf
59
Elk Grove IL 60007 847-437-4488 847-437-4538
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Chemical Processing (Use by Smalley Steel Ring Company)NADCAP Approvals (see listing in fileAMS-2700
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
Conversion/Phosphate Coatings AMS 2486 No NoNo
Conversion/Phosphate Coatings AMS 2473 No NoNo
Cadmium Plating AMS 2400 No NoNo
Chemical Cleaning ASTM B 600 No NoNo
CHEMICAL CONVERSION COATINGS ON ALUMINUM A MIL-C-5541 No NoNo
Anodizing MIL-A-63576 No NoNo
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM A MIL-A-8625 No NoNo
Anodizing AMS 2472 No NoNo
Anodizing AMS 2471 No NoNo
Anodizing AMS 2469 No NoNo
Quality System ISO9001:2008 No NoNo
Quality System AS9100C No NoNo
Nadcap - Chemical Processing AS7003 No NoNo
NADCAP - Chemical Processing AC7108 No NoNo
Anodizing AMS 2468 No NoNo
Cadmium Plating AMS 2400 No NoNo
NADCAP - Chemical Processing AC7108 No NoNo
NADCAP - Brazing (Torch/Induction) AC7110/1 No NoNo
NADCAP - Etch Processes (Blue Etch Anodize, Local, Mac AC7108/2 No NoNo
Chemical Milling of Metals, Specification for MIL-C-81769 No NoNo
NADCAP - Fusion Welding AC7110/5 No NoNo
Surface Treatment/Passivation ASTM A 380 No NoNo
NADCAP - Welder/Welding Operator Qualification AC7110/12 No NoNo
CHEMICAL CONVERSION MATERIALS MIL-DTL-5541 No NoNo
NADCAP - Surface Preparation Prior to Metal Bond AC7108/3 No NoNo
Passivation Treatments for Corrosion Resistant Steel AMS-QQ-P-35 No NoNo
Surface Treatment/Passivation AMS 2700 No NoNo
Passivation Treatments for Corrosion Resistant Steel QQ-P-35 No NoNo
Chemical Milling of Metals, Specification for MIL-C-81769 No NoNo
Monday, August 05, 2013 Page 63 of 111
Miles Chemical Co., Inc. 12801 Rangooa St.
36716
Arleta CA 91331 818-504-3355
Anthony Miles, President, Tony Rossi, Operation Director
818-504-3360
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Chemical and waste hauling, MISCELLANEOUS ITEMS / SERVICES
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
Quality System ISO 1401:2004 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Miller-Stephenson Chemical Co. (2) 55 Backus Ave
16485
Danbury CT 06810 (203)743-4447
Joanna Saffo, QC Mgr./ Moverad Fahmi, Gen. Mgr.
(203)792-8702
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Specialty chemicals packaged in aerosol & non-arosol
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/8/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Miller-Stephenson Chemical Company 12261 Foothill Blvd.
106806
Sylmar CA 91342 818-896-4714
Mr. Stephenson, President/ Joanna Saffo, Q.A.
818-896-6086
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Specialty chemicals.Re-packager for Momentive Specialty Chemicals' resins and curing agents and DuPont's Krytox lubricants, Formulate products and package in aerosol and non-aerosol.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/9/2015
Cooper BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Mill-max Manufacturing Corp. 190 Pine Hollow Rd.
36717
Oyster Bay NY 11771-0300 516-922-6000 516-922-9253
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Pins, pin receptacles and spring loader contacts.ISO-9001,QS9000,AS9000 , MIL-STD-790,MIL-I-45208,MIL-C-45662,MIL-DTL-83734,MIL-DTL-8350.QPL-83734
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/17/2014
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
Quality System AS9100B No NoNo
Quality System MIL-Q-9858A No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208 No NoNo
Quality System ISO9001:2008 No NoNo
Monday, August 05, 2013 Page 64 of 111
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
Mindrum Precision Inc. 10,000 Fourth Street
36721
Rancho Cucam CA 91730 909-989-1728
Diane Mindrum President, Chris Ayers Quality Control Manager
909-987-3709
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
precision machining & polishing of glass quartz, ceramic & metals. Bonded filter assemblies, optical assemblies, eye safe laser assemblies measuring & mapping of large cavities. Glass blowing, flow cells, medical devices lightweighting or large mirrors.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/14/2015
Quality System ISO9001:2000 No NoNo
COOPER Basic Supplier Requirements No NoNo
Molded Devices, Inc. 6918 Ed Perkic St.
47293
Riverside CA 92504 951-509-6918
Brian Anderson
951-509-9061
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Dip Molding/Coatingusing plasticized PVC-Plastisol
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 5/6/2013
ISO9001:2008 No NoNo
Molding Corporation Of America 10349 Norris Ave.
36726
Pacoima CA 91331 818-890-7877
Mark Hurley, President & QA Manager
818-890-7885
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Plastic injection molding.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/26/2015
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Montclair Bronze, Inc. 5821 State Street
36728
Montclair CA 91763 909-986-2664 909-984-6179
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor of metal alloys.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/26/2013
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
FORGINGS & EXTRUSIONS No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 65 of 111
Motion Industries, Inc. 858 East 5th Street
36729
Oxnard CA 93030 805-487-4877
Duane Salka, QM
805-487-3555
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Dist. Industrial bearings and other power transmission components.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/13/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
MS Inserts and Fasteners Corp. 24310 Garnier St
36732
Torrance CA 90505 310-539-1530
Don Marston, QA Mgr.; Bob Duncan Vice President
310-539-2906
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
MS Inserts & Fasteners
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
Quality System No NoNo
Aerospace Quality Management System Certification AS9104A No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
MSC Industrial Supply Co. 75 Maxess Road
106894
Melville NY 11747 800-645-7270
800 255-5067
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Industrial, MRO and Metalworking Supplies
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/19/2015
BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Multi-Seals, Inc. 540 N. Main Street
36733
Manchester CT 06040 860-643-7188
Bert Anderson, V.P. Quality, Dave Anderson, President
860-643-5669
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Epoxy preforms.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/12/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Monday, August 05, 2013 Page 66 of 111
MURRAY-BENJAMIN ELECTRIC CO. 397 WEST AVENUE
5500
STAMFORD CT 06902 203-705-2100 203-705-2111
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Cable
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/11/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
National Magnetics Group, Inc. 1210 Win Drive
36735
Bethlehem PA 18017 610-867-7600
Paul Oberbeck Pres./Goutam Das QA Mgr
610-867-0200
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Magentic materials: ferrites, magnets, iron cores, garnets, dielectrics.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/16/2015
No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
FERROUS METALS No NoNo
National Sealants & Lubricants 33110 Old Hempstead
36737
Magnolia TX 77355 800-527-0011 281-259-0303
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Cytec adhesive, paints and potting compound distributor.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 3/23/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
VALUE ADDED SEALANT DISTRIBUTORS AS7202 No NoNo
National Technical Systems 7829 Industry Avenue
36570
Pico Rivera CA 90660 562-949-2727
Scott Miller, Lab Mgr. / Don Moshter Jr., Q.A.M.
562-949-8757
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Testing and calibration
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/22/2016
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
Monday, August 05, 2013 Page 67 of 111
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
National Technical Systems (1) 5320 W 104th Street
36738
Los Angeles CA 90045-6099 310-348-0900
Don Hedley, Quality Rep/ Dan Cannon, Dir. Of Quality
310-670-7556
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Approved for Acoudtics and Vibration Testing; Mechanical Testing; Electrical Testing and Thermal Testing. See file for complete details.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/22/2016
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
Accredited Testing Facility A2LA No NoNo
COOPER BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
National Technical Systems (2) 15062 Bolsa Chica St.
36922
Huntington Bea CA 92649 714-892-1961
Daniel Becerra, Quality Manager; Mark Jonus, Senior V.P.
714-892-8159
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metallurgical Evaluation, Chemical Analysis, Mechanical Testing, Dimensional Inspection
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/22/2016
Audit Criteria for Material Testing Laboratories AC7101/1 No NoNo
Material Testing for Fastener AC7101/11 No NoNo
Material Test Laboratories for Mechanical Testing AC7101/3 No NoNo
Material Testing for Corrosion AC7101/6 No NoNo
Materials Test Laboratories for Chemical Testing AC7101/2 No NoNo
Material Testing for Hardness AC7101/5 No NoNo
General Requirements for the Competence of Testing ISO/IEC 17025-2005 No NoYes
Material Testing for Heat Treating AC7101/9 No NoNo
Material Testing for Mechanical Testing Specimen P AC7101/7 No NoNo
Material Testing for Metallography and Microhardne AC7101/4 No NoNo
National Technical Systems (3) 1536 East Valencia Driv
36739
Fullerton CA 92831 714-879-6110
Betty Matteson, QAM [email protected]
714-879-6117
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Product safety, fiber optic testing & engineering services
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/22/2016
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Monday, August 05, 2013 Page 68 of 111
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No NoNo
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Mechanical Testing A2LA No NoNo
Electrical Testing A2LA No NoNo
Thermal Testing A2LA No NoNo
Nelson Nameplate 2800 W. Casitas Avenu
36744
Los Angeles CA 90039 323-663-3971
David Lazier, Co-President/Thomas Cassutt, Co-President/Hilda O
323-663-2137
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Electronic membrane switches, panels, plates, graphic overlays. Anodizing, nameplates lenses, labels, membrane
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/3/2015
Yes NoNo
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM A MIL-A-8625 Yes NoNo
NADCAP- Standard Requirements AC7004 Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
Net Shapes, Inc. 1336 E. Francis St.
36745
Ontario CA 91761 909-947-3231
Joseph Cannone, Pres. & Owner/Colin J. Royse, Dir. of QA
909-947-2596
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Castings
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 7/9/2013
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Inspection, Liquid Penetrant MIL-STD-6866 No NoNo
AMS-2175 REV.A GR.D No NoNo
NADCAP NonDestructive Testing - Penetrant AC7114/1 No NoNo
NADCAP NonDestructive Testing AC7114 No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Standard Practice for Liquid Penetrant Testing ASTM-E-1417-05E1 No NoNo
NADCAP NonDestructive Testing - Magnetic Particle AC7114/2 No NoNo
NADCAP - Testing Facility - Ultrasonic AC7114/3 No NoNo
NADCAP - Testing Facility Film Radiography AC7114/4 No NoNo
Non Destructive Testing AC7114 No NoYes
Monday, August 05, 2013 Page 69 of 111
Newcomb Spring 8380 Cerritos Ave
46990
Stanton CA 90680 714-995-5341
Gary Edmunson, Quality Assurance Manager
714-995-7127
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/20/2013
Quality System ISO9001:2000 No NoNo
Northwest Spring 11973 SW Herman Rd.
48551
Tualatan OR 97062 971-224-2180
Don Lolly, Q.M./Dan Anderson, Yvonne Daves, Don Lolly, Gen Mg
971-224-2187
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacturing of precision coiled and flat springs, wire forms, metal stampings and associated assemblies.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/29/2015
Quality System ISO9001:2000 No NoNo
G&H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Nusil Technology 1050 Cindy Lane
36756
Carpinteria CA 93013 805-684-8780
Tom Danigan, VP of QA Regulatory Affairs Lisa Hernandez, QA
805-684-2365
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Design, development, and formulation and production of advanced silicone materials for the healthcare, aerospace and manufacturing industries.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/26/2015
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
Nylok Fastener Corporation 313 N. Euclid Way
36759
Anaheim CA 92801 714-635-3993
Hans Dorflinger, General Manager /Maynard Axvis, QA Manager/Lil
714-635-9553
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Fasteners, Self-locking.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 2/5/2016
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
FASTENERS PROCESSING Yes NoNo
Monday, August 05, 2013 Page 70 of 111
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
Omega Engineering One Omega Drive
4660
Stamford CT 06907 203-359-1660
David Lucas, Quality Coordinator
203-359-7900
Process:
Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Design, manufacture and distribution of temperature, humidity, strain, flow, level, PH, conductivity, heating, data acquisition, pressure, environmental instruments and related process equipment, accessories and custom assemblies. The provision of calibration services and technical and scientific literature.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 6/25/2013
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Omikron Engineering 18334 Eddy Street
36764
Northridge CA 91325-3314 818-349-6751
Frank Krestyn President/Owner, Anthony Trovato QA Manager
818-349-0623
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Small precision experimental production (CNC) Maching, Turning, Milling
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Quality System ISO9001:2000 No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
Omni Metal Finishing, Inc. 11665 Coley River Circl
36765
Fountain Valley CA 92708 714-979-9414
Victor M. Salazar, President Abel Salazar, QA Manager
714-641-5293
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal finishing (note: codes 3.01, 3.02, 3.04, 3.06, 3.24, 3.38are also L/M Denver approved)
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes Yes Survey Due: 11/29/2015
Conversion/Phosphate Coating DOD-P-16232 TYPE M, CLASS II Yes YesNo
PASSIVATION QQ-P-35 TYPE II Yes YesYes
PENETRANT INSPECTION (MIL-I-6866) MIL-STD-686 Yes YesNo
VAPOR HONING Yes YesNo
SAND BLASTING Yes YesNo
NADCAP - Chemical Processing AC7108 Yes YesYes
NADCAP - Etch Processes (Blue Etch Anodize, Local, Mac AC7108/2 Yes YesYes
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION I MIL-L-46010 TYPE I, II Yes YesYes
NADCAP NonDestructive Testing AC7114 Yes YesYes
COPPER PLATING MIL-C-14550 Yes YesYes
Monday, August 05, 2013 Page 71 of 111
Passivation Treatments for Corrosion Resistant Steel QQ-P-35 Yes YesNo
CADMIUM PLATING QQ-P-416 TYPE I,II Yes YesYes
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes YesNo
Model for Aerospace Quality Assurance Systems AS9100 Yes YesNo
ANODIZING - ALUMINUM MIL-A-8625 (1) TYPE I-CHRMIC(DY/UDY) Yes YesYes
ANODIZING - ALUMINUM MIL-A-8625 TYPE II-SULF (DY/UDY) Yes YesYes
ANODIZING - ALUMINUM AMS 2468 HARD Yes YesYes
ANODIZING - ALUMINUM MIL-A-8625 TYPE III - HARD Yes YesYes
ALUMINUM CONVERSION COATING MIL-C-5541 GEN.C/FLM, CLR & COLR Yes YesYes
CADMIUM PLATING QQ-P-416 TYPE I, II, III Yes YesYes
TIN PLATING MIL-T-10727 TYPE I Yes YesYes
NADCAP NonDestructive Testing - Magnetic Particle AC7114/2 Yes YesYes
NICKEL PLATING QQ-N-290 ELECTRO DEPOSITED Yes YesYes
NICKEL PLATING MIL-C-26074 ELECTROLESS Yes YesYes
NADCAP - Painting and Dry Film Coatings AC7108/1 Yes YesYes
NADCAP NonDestructive Testing - Penetrant AC7114/1 Yes YesYes
One Way Industrial Supply, Inc. 302 Pine Ave
36767
Goleta CA 93117 805-964-6749
Robert Briggs
805-964-3779
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Cutting tools and tools for manufacturing machine shop supplies.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/24/2016
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Onvaco(U.S.A) Inc. 6747 Sierra Ct., Suite E
65055
Dublin CA 94568 925-479-0045
Philip Lan [[email protected]]
925-479-0394
Process:
Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Auto-lathe products,CNC lathe products,Casting/Molding products, Rubber components. Email [email protected] [email protected] components, screw machin, plastic, rubber, casting, Components
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/19/2013
SAMPLING PROCEDURES AND TABLES MIL-STD-105 No NoNo
Monday, August 05, 2013 Page 72 of 111
Optel-Matic, Inc. 11221 Thienes Avenue
6801
So. El Monte CA 91733 626-444-2671
Max Buettika, President/Elizabeth Karpynetz QA Mgr.
626-401-9936
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Material fabrication.Pins, Contacts, Sockets precision parts.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/6/2016
PASSIVATION/CLEANING MIL-S-5002 Yes NoNo
PASSIVATION QQ-P-35 TYPE II Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
MACHINING SWISS SCREW MACHINE Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Orange County Nameplate Co., Inc. 13201 Arctic Circle
36770
Santa Fe Sprin CA 90670 562-921-7795
Elias Redriguez, President/Gilbert Ochoa, QA Manager
562-802-2242
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Chemical etch nameplates, scotchcals, foilplates, embossing, engraving, hot stamping, panels & dials, laxan overlays, metal stamping, roll labels, barcoding, membrane switches.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/11/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
O-Rings, Inc. 3311 Pepper Ave
36772
Los Angeles CA 90065 323-343-9500
Miguel Rivera, QA Mgr. Amanda Nelson, Office Manager
323-343-9505
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
O'rings.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/27/2013
GASKETS Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
Monday, August 05, 2013 Page 73 of 111
Orion Precision Industries, Inc. 8 Veronica Avenue
43984
Somerset NJ 08873-3417 732-247-9704
Dean Russell, VP of Operation/Quality; John Sztankovitz, Presiden
732-828-8878
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacturing of Contacts
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/7/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Pacific Heat Treating Co. Inc. 1238 Birchwood Drive
36536-Sub
Sunnyvale Ca 94089 408-736-8500
Doug Holt, QC Manager
408-745-7620
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
This Vendor is to be used only as a subtier of Advanced Machining Techniques
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
For use by Sub-Tier only - See Vend NotesG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/21/2014
Z540-1 For use by Sub-Tier only No NoNo
Pacific Magnetic & Penetrant Co., Inc. 6837 Farmdale Avenue
36778
North Hollywoo Ca 91605 818-765-7266
Erik B. Anderson, President/John H. Smith, QA Mgr.
818-765-3355
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Magnetic particle inspection (Wet Method) IAW ASTM E 1444Liquid penetrant inspection IAW ASTM E 1417Passivation Per AMS QQP 35 Salt-Fog, High Humidity, Alu, oxide & glass bead blasting.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes Yes Survey Due: 12/12/2015
NADCAP- Standard Requirements AC7004 Yes YesNo
NON DESTRUCTIVE TESTIN MAGNETIC PARTICLE AC7114/2 Yes YesNo
NON-DESTRUCTIVE TESTING PENETRANT AC7114/1 Yes YesNo
SMPLG PROC. & TBLS BY VAR. FOR % NON-CONF. ANSI/ASQC Z1.9-1993 Yes YesNo
Non Destructive Testing AC7114 Yes YesYes
PASSIVATION QQ-P-35 TYPE II Yes YesNo
CHEMICAL PROCESSING AC7108 Yes YesNo
Standard Practice for Liquid Penetrant Examination ASTM-E1417 Yes YesNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes YesNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes YesNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes YesNo
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A Yes YesNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes YesNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes YesNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes YesNo
Monday, August 05, 2013 Page 74 of 111
Pacific Metal Stampings 28415 W. Witherspoon
36779
Valencia CA 91355 661-257-7656
Donald Schlotfelt President, Brian Schlotfelt VP
661-257-7009
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal stampings.PUNCH PRESS
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/29/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
PUNCH PRESS Yes NoNo
Pacific Testing Laboratories 24950 Avenue Tibbitts
36782
Valencia Ca 91355 661-257-1437
Frank Barrett Q.C. Manager, Michael C. Shin Lab Director
661-257-2411
Process:
Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metallurgical testing:Electrical, mechanical, metallurgical, physical, chemistry, thermal, analytical tests. Alloy Identification, spectro photography, wet chemistry analysis, salt spray, mercury analysis, solderability, organic contamination, x-ray rad
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/3/2015
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
ANSI/NCSL Z540-1-1994 Yes NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
Pei-Genesis 3951 South Plaza Drive.
43068
Santa Anna CA 92704 800-746-2642 714-428-1194
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Electronic distributor in passive/electromechanical components specializing in connector assembly.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/28/2015
Electronic Distributor in Passive/Electromechanical Compo ISO-9001:2008 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Pennoyer-Dodge Co. 6650 San Fernando Ro
36795
Glendale CA 91201 818-547-2100
Hazel Dodge, President Robert Dodge, VP Quality Adminstration C
818-240-5719
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Gages
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/28/2015
GAGES No NoNo
Monday, August 05, 2013 Page 75 of 111
CALIBRATION No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Pico Corporation 444 Constitution Avenu
36799
Camarillo CA 93012 805-388-5510
Bill Green CEO Gil Struble V. Pres, Quality Manager Mark Green
805-482-4038
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Crimping tools, Contact installing tools, Removal tools.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/21/2016
CRIMPING INS./REMOVAL TOOLS Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Pierce Aluminum Co. Inc. 34 Forge Park
971
Franklin MA 02038 800-336-1358
GARY Jeff Pierce, QA Manager
508-541-6077
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Rawbar material.Site Name: KentAddress: 1208 4th Ave. North, Kent, WA 98032Phone: 253-239-6181
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 8/5/2016
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Quality System ISO9001:2000 Yes NoNo
MISCELLANEOUS ITEMS/SERVICES Yes NoNo
Pierce Spafford Metals 7550 Chapman Ave
36800
Garden Grove CA 92841-2108 714-895-7756 714-891-5308
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Recycling, distribution, machining and fabrication of specialty alloys and mfr of cast ingots, mill products and extrusions of titanium, titanium alloys and other specialty alloys for commercial, industrial and aerospace applications.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 2/2/2013
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Plastic Sales Southern, Inc. 849 W. 18th St.
36805
Costa Mesa CA 92627 949-728-8309 949-645-1311
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Plastic distributor. Sheet, Rod, Tube etc.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/3/2013
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 76 of 111
Plateronics 9164 Independence Ave
48139
Chatsworth CA 91331 818-341-2191
[email protected] Maria Perez
818-341-2191
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Anodize, Passivation, Chemical Film, Copper, Gold, Nickel, Silver ,Tin, Zinc
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 7/11/2016
Silver Plating QQ-S-365 No NoNo
PLATING ON ALUMINUM AMS2420 No NoNo
Quality System AS9100B No NoNo
Quality System ISO9001:2008 No NoNo
CHEMICAL CONVERSION MATERIALS MIL-DTL-5541 No NoNo
Passivation Treatments for Corrosion Resistant Steel AMS-QQ-P-35 No NoNo
Tin Plating MIL-T-10727 No NoNo
Zinc Plating ASTM-B633 No NoNo
COATINGS, ELECTROLESS NICKEL AMS-C-26074 No NoNo
Nickel Plating MIL-P-27418 No NoNo
COPPER PLATE, ELECTRODEPOSITED MIL-C-14550 No NoNo
GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 No NoNo
Anodizing MIL-A-63576 No NoNo
Powell Electronics 200 Commodore Drive
36809
Logan Townshi NJ 08085 856-241-5635
Ernest Schilling President, Barbara Pescatore Quality Manager
856-241-8630
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Various Connector (See Line Card in file)Value Added Distributor of Electrical Connectors and Accessories
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/6/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
PRC-DESOTO, INT. (PPG Aerospace) 24811 Avenue Rockefel
16549
Valencia CA 91355 661-678-4209
Rod Hunter Q.C. Manager
661-678-4321
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Sealants, Adhesives, primers, coatings.ISO 9001:2000 & NADCAP AS7003
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 10/9/2015
G & H BASIC QUALITY SYSTEM REQUIREMENTS Yes NoNo
Quality System ISO9001:2000 Yes NoNo
Monday, August 05, 2013 Page 77 of 111
Precious Metals Plating Company, Inc. 2635 South Orange Ave
36812
Santa Ana CA 92707 714-546-6271
Chad Bird, President; Brian Day, QA manager
714-546-1306
Process:
Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
General plating services.Approved by Lockheed Martin for NADCAP AC7004, MIL-G-45204 Gold Plating and AMS2418 Type 1 Copper Plating.ASTM B488-01,QQ-S-365D,ASTM B700-08,AMS2410K,QQ-N-290A,AMS-QQ-N-290B,ASTM B697-08
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No Yes Survey Due: 11/18/2013
GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 TYPE II, CL 2 No YesYes
Surface Treatment/Passivation ASTM A 967 No YesNo
Silver Plating AMS 2412 No YesYes
Silver Plating QQ-S-365 SILVER No YesYes
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No YesNo
NADCAP - AQS - Inspection and Test Quality System AC7004 No YesYes
Silver Plating AMS 2410 No YesYes
GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 TYPE I, GRADE A No YesYes
COPPER PLATING MIL-C-14550 No YesNo
Copper Plating AMS 2418 Type 1 No YesYes
5000-80-0033 No YesNo
NICKEL PLATING QQ-N-290 ELECTRO DEPOSITED No YesYes
GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 No YesYes
GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 TYPE I, CL 1 No YesYes
Precise Aerospace Manufacturing 224 Glider Circle
36814
Corona CA 92880 951-898-0500
Roxanne Abdi Pres./ Donald Montgomery QA Mgr.
951-898-0600
Process:
Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Injection, transfer, compression molding, machining, mold making ETC.Plating, material processes, passivate, dry lube, heat treat, NDT, penetrant, Eddy current, etc available through approved subcontracted. Injection molding, transfer molding, CNC machining, mechanical and electrical assembly.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/13/2014
PLASTIC MOLDED OR EXTR. GOODS Yes NoNo
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
Monday, August 05, 2013 Page 78 of 111
Precision Components 4682 Calle Bolera Rd. U
36816
Camarillo CA 93012 805-383-4484
David Erickson, CEO/ Travis Erickson QA Mgr.
805-383-4480
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Precision machined contacts / components.
Sheffield Plating is authorized for use as sub-tier for this supplier for processing per approved survey dated 7/6/09.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/21/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
MACHINING SWISS SCREW MACHINE Yes NoNo
MACHINING CNC TURNING Yes NoNo
MACHINING CONVENTIONAL SCREW MACHININ Yes NoNo
MACHINING GENERAL Yes NoNo
Precision Resource-CA (Cal. Fine Blanking) 5803 Engineer Drive
36818
Huntington Bea CA 92649 714-891-4439
Robert Fitzgerald, Div. Manager
714-892-3652
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
FineblankingQUEST SUPPLIER 10/06
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due:
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
MACHINING GENERAL No NoNo
QUALITY SYSTEM REQUIREMENTS (AUTOMOTIVE IND QS-9000 No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Preferred Testing 5148 Commerce, Suite
36820
Moorpark CA 93021-7149 805-532-2092
Major Mirza, Lab Director
805-532-2094
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Electronic testing, including ionic contamination; destructive & non-destructive; temp. cycling, vibration, humidity, etc.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/10/2015
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
MIL-PRF-23377 Yes NoNo
SOLDERING NHB 5300.4 3A-1 Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
MISCELLANEOUS ITEMS/SERVICES Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Monday, August 05, 2013 Page 79 of 111
Products Techniques, Inc. 3271 South Riverside A
37060
Rialto CA 92376 909-877-3951
Barry Boden, Q. C. Mgr.
909-877-6078
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mfg. Mil, & Customer 3 pec, Paints, primers, and specialty coatings.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/3/2016
Quality System ISO9001:2008 Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
Professional Plastics 1810 E. Valencia Dr.
12632
Fullerton, CA 92831 714-446-6500
Scott Patten, GM /
714-447-0114
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Plastic sheet, rod, tube and film.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/13/2015
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Promatic Industries, Inc. 6926 Deering Avenue
36832
Canoga Park CA 91303 818-888-5076
Herman Bloss, President Tom Bloss, QC Manager
818-888-5001
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Precision machined parts.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/10/2016
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
MACHINING CNC TURNING Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
MACHINING LATHE TURNING Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
Pro-Tek Tool and Die, Inc. 13625 Alma Ave.
46946
Gardena CA 90249 310-516-8682
Ronald Cooper
310-516-8605
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
CNC Machining
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/27/2013
Monday, August 05, 2013 Page 80 of 111
Basic supplier requirements No NoNo
Quality Rolling & Deburring (QR&D) 135 South Main St.
01
Thomaston CT 06787 203-283-0271
Sam Everett, Quality Manager
860-283-8589
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
To be used only as a sub-tier supplier for Braxton Manufacturing- Passivation
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
For use by Sub-Tier only - See Vend NotesG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 8/12/2013
Quality System ISO9001:2000 For use by Sub-Tier only No NoNo
Passivation QQ-C-35C No NoNo
Quality Surveillance Inc. 1200 Yarnell Place
36841
Oxnard CA 93033 805-240-2448
Fernando Perez, President Check Grethel, Cal Lab Supervisor Pr
805-240-2451
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Calibraton Services
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/14/2015
CALIBRATION No NoNo
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
R & D Welding Company 13112 Saticoy Street
44359
North Hollywoo CA 91605 818-764-4869
Shiu Chandra, Owner & Mgr.
818-503-2922
Process:
Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
G&H Basic Vendor Quality RequirementsSheet metal fabrication / certified welding.FSN Wldg Stell & Super Alloys (GTAW)FSN Wldg Alm, Mag, TT & Alm-Brylm (GTAW)Machining
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 7/22/2013
Cooper Basic Supplier Requirements No NoNo
R & S Machine Co. 11100 Airport Drive
36843
Hayden ID 83835 208-818-2976
Ron McCauley, Pres./Scot McCauley, Gen. Mgr.
208-772-6196
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
General CNC machining.Billing address 5256 W. Seasons RdRath Drum, ID 83858
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
Survey ExpiredG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/2/2012
Monday, August 05, 2013 Page 81 of 111
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
R & S Processing Company 15712 Illinois Ave.
36844
Paramount CA 90723 562-531-1403
Karen Kelly, President/Glen Pomrehn, Laboratory Mgr./John S. Tur
562-531-4318
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Custom rubber compounding.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/30/2015
MISCELLANEOUS ITEMS/SERVICES Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Quality System ISO9001:2000 Yes NoNo
R. A. Fischer Mach. Prod. Inc. 10043 Canoga Avenue
36845
Chatsworth CA 91311 818-341-3290
Mary Fischer, VP
818-341-6539
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Plug grounding rings.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/16/2016
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
R. D. Abbott Co., Inc. 12330 McCann Drive
36847
Santa Fe Sprin CA 90670 562-944-5354
Keith Thomas, President/Tom Martin, Operations Mgr.
562-944-5374
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Lord, Chemlok
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 2/15/2013
MISCELLANEOUS ITEMS/SERVICES No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Quality System ISO9001:2008 No NoNo
R. S. Hughes 10639 Glenoaks Blvd. U
36848
Pacoima CA 91331 818 686-9111
Matt Henderson Quality Manager
818 686-1973
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor (Only) of adhesives, abrasives, electrical, safety, static control, tapes (pressure sensitive).
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/26/2015
Monday, August 05, 2013 Page 82 of 111
SILICONE ADHESIVE 999-164 Yes NoNo
BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Adhesive WS17656A Yes NoNo
Rakar, Inc. 1700 Emerson Avenue
36851
Oxnard CA 93033 805-487-2721
Jeff Babb, Quality
805-483-2778
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacturer of Molds & Molded plastics.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
Survey ExpiredG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/11/2012
PLASTIC MOLDED OR EXTR. GOODS Yes NoNo
EPOXY MOLDING COMPOUND 999-068 Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
RDS Wire&Cable, Inc. 225 E. Gardena Boulev
2877
Gardena CA 90248 310-323-7131
Jon Stott, President/Buddy Luna, V.P.
310-323-1951
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
MIL-W-22759/32-24 WIRE; The warehousing, distribution and value added processes of electrical wire cables and tubings.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/11/2015
No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Reid Tool Supply Co. 2265 Black Creek Rd.
2504
Muskegon MI 49444 (800)253-0421 (800)438-1145
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Industrial Tooling & Specialty ComponentsParent Co.: Filtrona Milton201-249 Avebury Blvd, Milton Keynes Mk
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
Survey ExpiredG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 8/5/2016
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 83 of 111
Reltek 2345 Circadian Way
36861
Santa Rosa CA 95407 707-284-8808
Robert E. Lindberg, President / Amy
707-284-8812
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Adhesives, sealants and coatings.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/16/2016
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
ADHESIVE No NoNo
PRIMER 999-241 No NoNo
Romakk Engineering 19863 Nordhoff Street
36865
Northridge CA 91324 818-700-1035
Jim Major, QA Manager
818-700-2978
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacturer of Precision Parts
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 10/29/2013
WIRE EDM Yes NoNo
Metal Stamping General Yes NoNo
MACHINING DRILLING/TAPPING Yes NoNo
MACHINING CONVENTIONAL SCREW MACHININ Yes NoNo
MACHINING GENERAL Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Ross Nameplate #2 Red Plum Circle
36867
Monterey Park CA 91755-7486 323-725-6812
Brent Henderson Gen.Mgr / Scott McBride QC Mgr.
323-888-1042
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Nameplates, overlays, foil labels, labels, scotchcals, panels, dials, silkscreening.QUEST 8/06
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/30/2015
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
PRINTED WIRING BOARDS Yes NoNo
ANODIZING - ALUMINUM MIL-A-8625 TYPE III - HARD Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A Yes NoNo
Monday, August 05, 2013 Page 84 of 111
RTP Company 580 E Front Street
18086
Winoma MN 55987 507-454-6900
Hugh Miller, CEO/Ken Lanik, V.P., Quality Assurance.
507-454-4629
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Thermoplastic Molding Compounds.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/20/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Rubbercraft Corp. of California 15627 S. Broadway
51614
Gardena CA 90248 323-775-2261
Edgar Garcia, QA Manager
310-618-1832
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Custom molded and extruded rubber.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/17/2016
Quality System ISO9001:2008 No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
RUBBER MOLDED GOODS No NoNo
Rubberite Cypress Sponge 301 East Goetz Ave.
36871
Santa Ana CA 92707 714-546-6464
Plant Manager A. Brooks
714-546-6747
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Rubber sheeting.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/17/2016
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
RUBBER MOLDED GOODS Yes NoNo
SAATI Americas 2050 Hammond Dr.
36874
Schaumburg IL 60173 847-925-8570
Kathy Tylka, Q.M./sergio Ceppi, MMF&Q
847-925-9278
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Design of new products, improvement of the existing products, production, sales and marketing of fabrics for screen printing, screen printing accessories and fabrics for other industrial applications.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/2/2016
G&H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Quality System ISO9001:2000 No NoNo
Monday, August 05, 2013 Page 85 of 111
Sager Electronics 19 Leona Drive
43291
Middleborough MA 02346 714-962-8666
Sharon, Quality
714-593-2450
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distribution of Electronic & Electromechanical ProductsLocal Area-Fountain Valley, CA 92708
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/3/2016
Quality System ISO9001:2000 No NoNo
Saint-Gobain Performance Plastics 7301 Orangewood Ave
16321
Garden Grove Ca 92841-1411 714-995-1818
Dan Hickman (Quality Manager), Dan Tolles (Operation Manager)
714-688-2700
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
G&H Basic Vendor Quality RequirementsMachining
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 9/20/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
Quality System ISO9001:2008 No NoNo
Sava Industries, Inc. 4 N. Corporate Dr.
100181
Riverdale NJ 07457 973-835-0882
Jim Pierro/Tom Moore, QA Manager
973-835-0877
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacturing and machining.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 2/5/2016
khk No NoNo
Quality System ISO9001:2000 No NoNo
Schlumberger 12131 Industry St.
47011
Garden Grove Ca 92841 714-379-7332
Susan Chasman
714-379-5505
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Packing. All oil field product and services.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/22/2013
Quality System ISO9001:2000 No NoNo
Monday, August 05, 2013 Page 86 of 111
Sea Wire & Cable Co. 451 Lanier Road
7319
Madison AL 35758 800-633-7210
Bob Wills, President; William Thomas, Q.C. Mgr.
256-772-7402
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Wire products, splice wire, insulation sleeving.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/20/2015
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Serra Manufacturing Corp. 3039 E. Las Hermanas
36884
Rancho Domin CA 90221 310-537-4560
Steve Fitzpatrick & John Hernandez, Owners/Maria Cerda, VP & Q
310-537-5919
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacturing precision stampings, washers, gaskets and spacers for aerospace & commercial applications.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/29/2015
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Sheffield Platers Inc. 9850 Waples St.
03
San Diego CA 92121 858-546-8484
Jennifer McCown [email protected]
858-546-7653
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal Finishing Services, PlatingSub-Tier supplier for Precision Components
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
For use by Sub-Tier only - See Vend NotesG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/12/2013
NADCAP - AQS - Inspection and Test Quality System AC7004 For use by Sub-Tier only No NoNo
Silvas Oil Company, Inc. 1757 E. Wooley Road
36893
Oxnard CA 93032 805-486-4581
Tim Simonsgaard, Mgr. Engineering & Marketing/Norma Laster, Sa
805-487-0788
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Lubricants and chemicals.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/12/2014
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 87 of 111
Single Source Print & Graphics PO BOX 5104
36895
Oxnard CA 93031-5104 805-485-9970
Kay Hodges, Owner/Fred Hodges, Production Mgr. & QA MGR
805-485-7939
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Printed Products.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/10/2015
MISCELLANEOUS ITEMS/SERVICES No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Slide Systems Inc. 1448 240th St.
36896
Harbor City CA 90710 310-539-3416
Myra Beisel, Owner/Dick Wuerfel, QC Manager/Jim Couture, QA M
310-539-8001
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Precision metal stamping & metal forming.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 10/28/2014
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Cancelled Yes NoNo
FOUR SLIDE Yes NoNo
PUNCH PRESS Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Cancelled Yes NoNo
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A Cancelled Yes NoNo
BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Cancelled Yes NoNo
Smalley Steel Ring Company 555 Oakwood Road
7460
Lake Zurich IL 60047 847-719-5900
Chuck Greenhill, President/Bill McClelland, Manager
847-719-5999
Process:
Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
http://www.smalley.com/Passivate AMS-QQ-P-35Heat Treat Alloy SteelWasher/ShimsBoeing approved for H/T Steel over 260 KSI MIL-H-6875HI, H/T Steel under 260 KSI MIL-H-6875LO, & its associated testing MIL-H-6875LAB
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
QUALITY MANAGEMENT SYSTEM ISO/TS 16949:2002 No NoNo
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
AERSPACE QUALITY MANAGEMENT SYSTEMS REQUI AS 9100 Rev C No NoNo
ISO Quality Management ISO-9001:2008 No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
Monday, August 05, 2013 Page 88 of 111
Sonfarrel, Inc. 3010 LA JOLLA ST.
36902
ANAHEIM CA 92806 714-630-7280
Dennis Lewis, QA Mgr.
714-632-2229
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
200X-375-111 & 200x-375-71.Aerospace component parts manufacturing
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/14/2016
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
Sorenson Engineering, Inc 32032 Dunlap Blvs
48168
Yucaipa CA 92399 909.795.2434
Doug Hammer, QA Director [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacturing, electroplating, and assembly of high precision Swiss screw machined components.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/9/2015
Quality System ISO9001:2008 No NoNo
Sousa Corp 1045 New Britian Ave.
65374
West Hartford CT 06133-0108 860-523-9090
Used by Continential Machine Tool Co., Inc
860-236-8050
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Heat Treating
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
Quality System ISO9001:2008 No NoYes
NADCAP - Carbuizing AC7102/3 No NoNo
Metallography & Microindentation Hardness AC7104/4 No NoNo
Hardness Testing AC7102/5 No NoYes
NADCAP - Materials Testing Laboratories - Hardness AC7101/5 No NoYes
NADCAP AS7003 No NoYes
South Bay Cable Corp. 54125 Maranatha Drive
36904
Idyllwild CA 92549 951-659-2183
Gordon Brown, Gen.Mgr. / Tom Hansen QA Mgr.
951-659-3958
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufactures a variety of custom electrical, electromechanical, and electro-optical wire and cable.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/3/2015
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
Monday, August 05, 2013 Page 89 of 111
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Spectrum Plating 202 W. 140th St.
49900
Los Angeles CA 90061 310-533-0748
John Behm, Q.M./Mary McMeans, Pres.
310-856-0192
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Scope of approval applies to reel-to-reel, rack and barrel plating of components only
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/29/2015
G&H BASIC QUALITY SYSTEM REQUIRMENTS No NoNo
Quality System ISO9001:2000 No NoNo
Spira Manufacturing Corp. 12721 Saticoy Street So
36909
No. Hollywood CA 91605 818-764-8222
George Kunkel, President Michael Kunkel, QC Manager Oscar Esc
818-764-9880
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
EMI/RFI gaskets, shielding products and honeycomb filters
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/16/2016
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Spirol International Corp 30 Rock Avenue
7515
Danielson CT 06239 860-774-2048
Lisa Labbe-Mgmt Asst.; Jim Shaw-C.E.O.
860-774-8571
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Fasteners
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/4/2015
G&H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Spirol West, Inc. 1950 Compton Ave Suit
106709
Corona CA 92881 951-273-5900
Kevin Prokopchuk, QA Manager & Product Admin./Kristina Dewan,
951-273-5907
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Engineered fastening solutions.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/4/2015
G&H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 90 of 111
Spring Industries 1899 Palma Drive
36911
Ventura CA 93003 805-644-7165
Robert Reyes, QA Manager
805-644-8682
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacturer of custom springs.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/13/2015
SPRINGS Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
Quality System AS9100B Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
HEAT TREAT ALLOY STEEL MIL-H-6875 CRS IND. SEL. Yes NoNo
CLEAN & HEAT TREAT CH900 AMS-2759/3 REV E Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
RESIST. WLDG STEEL MIL-W-12332 Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
WIRE FORMING Yes NoNo
Stabond Corporation 1722 W. 139th street
36914
Gardena Ca 90249-3008 310-380-6168
E. Vancura (President), G. Kinnard (Technical Director)
310-329-2729
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Miscellaneous Items/Services. Adhesives.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/25/2016
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
Standard Wire & Cable 1959 E. Cashdan Street
48469
Rancho Domin CA 90220 310-609-1811
Milo Ong, QC Mgr./Russ Skrable, Pres.
310-609-1862
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Electonic wire & cable, heat shrinkable boots & tubing products.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/12/2015
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A No NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
WIRE FABRICATION No NoNo
Monday, August 05, 2013 Page 91 of 111
Strainsert Company 12 Union Hill Industrial
36924
West Conshoh PA 19428-2793 610-825-3310
A. Kutsay, President Tim Foley, V.P./Jim Hillferdy
610-825-1734
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machining
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/19/2015
MISCELLANEOUS ITEMS/SERVICES No NoNo
Quality System AS9100B No NoNo
FASTENERS PROCESSING No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Stranco Products 650 South Schmidt Roa
4490
Bolingbrook IL 60440 630-685-8484
Larry Land, Quality Manager/ Bruce Lotz, Vice President
630-685-8485
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Purchasing heat shrink tubing P/N M23053/8-005-0
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/20/2015
ISO TS 16949:2009 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Sub Source Inc. 600 18TH AVE.
7460A
Rockford Illinoi 61104 815-968-7800
Kerry Treadman [email protected]/ MIKE R
815-968-7850
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Subtier vendor for Smalley Steel Ring Co.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
For use by Sub-Tier only - See Vend NotesG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 6/10/2014
SAE Aerospace Standard AS7003 For use by Sub-Tier only No NoYes
Management System Standard ISO9001:2008 No NoNo
NADCAP - AQS - Inspection and Test Quality System AC7004 No NoYes
Monday, August 05, 2013 Page 92 of 111
Sun Automation, Inc. 2443 W. 208th St., Unit
A34279
Torrance CA 90501 310-328-7701
Reza Tahmasbi Pres./Neda Tahmasbi QA Mgr.
310-328-7709
Process:
Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mfr of custom automated assembly machinery.Design and manufacturing custom automated assembly machinery. Design and manufacturing custom tooling for your existing machines. Repair and refurbishment of your existing machinery.Manufacturer of custom automated machinearies and test equipmentProvide repair and refurbishment of electronic and electro mechanical eqipment
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/16/2016
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Sunbank Electronics (Joslyn Sunbank Company, L 1740 Commerce Way
36927
Paso Robles CA 93446 805-238-2840
Gary Carr, Dir. Of Quality reports to Kevin Kuhn
805-238-0241
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Backshells and connectors. Design and manufacturer of electrical connector accessories, flexible conduit systems and Military/Commercial Connectors
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/11/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
CADMIUM PLATING QQ-P-416 TYPE I,II No NoNo
PASSIVATION QQ-P-35 TYPE II No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
MFG &/OR ASSY. CONNECTORS No NoNo
NICKEL PLATING MIL-C-26074 ELECTROLESS No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
Superior Plating (JAJ Arrow Plating) 1901 E. Cerritos Avenu
36929
Anaheim CA 92805 714-774-1174
Rosa Martin, QA Manager
714-774-4093
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
General plating services.Vendor to be used on Boeing P.O's only as applicable.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/2/2016
Chemical Processing AS7003 No NoYes
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
PRECIOUS METAL PLATING(GOLD) 999-261 SELREX No NoNo
NADCAP - AQS - Inspection and Test Quality System AC7004 No NoYes
PASSIVATION/CLEANING MIL-S-5002 No NoNo
Monday, August 05, 2013 Page 93 of 111
Swiss Production, Inc. 2801 Golf Course Dr.
46079
Ventura CA 93003 805-654-8525
Michael Petrash, QA Manager/Richard Petrash, VP
805-654-0315
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Job shop / Swiss type screw machining, plastics and metals, 2 1/2" max diameter.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/31/2016
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A No NoNo
MACHINING LATHE TURNING No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
MACHINING SWISS SCREW MACHINE No NoNo
Syfer Technology Limited Old Stoke Road
36931
Arminghall Nor NR14 (44)1603723300
Mr. John Plaskett, Managing Director/Mr.Steven Watts, Quality Ma
(44)1603723301
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Certified for the design and manufacture of multilayer ceramic capacitors-planar arrays and feedthrough filters.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
Pending SurveyG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/20/2012
ISO-9001:2008 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Tamshell Mfg. Corporation 237 Glider Circle
36936
Corona CA 91720 909-272-9395
Johnny Hernandez, President/Kris Norlander, Quality Mgr.
909-272-9397
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Advanced engineered polymer machining, spring energized seals, lipseals.ISO 9001:2000 and AS9100:2004 Rev. B
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/14/2013
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
MACHINING NON-METALLIC MATERIAL No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
Monday, August 05, 2013 Page 94 of 111
Techni-Pak Packaging Products, Inc. 18017 Sky Park Circle,
36940
Irvine CA 92614 949-296-0017
William Frank/Steven Frank
949-296-0019
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Packaging materials.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/2/2016
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Tektronix Service Solutions 1411 N. Grand AVE. Sui
49152
Covina CA 91724 626-404-2200
Debi Jester
626-404-2206
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Calibration and Repair of Test, Measurment and Inspection Equipment
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/20/2013
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Quality System ISO9001:2008 No NoNo
Tension Member Technology Laboratories 5721 Research Drive
44746
Huntington Bea CA 92649-1616 714-898-5641
Philip T. Gibson, President/James A. Walther, Test Director/Mark B
714-893-1925
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Cable and rope testing, special cable terminations.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/17/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
CABLE SWAGING/CABLE PRODUCTS No NoNo
The Fredericks Co. (Televac Division) 2400 Philmont Ave
36941
Huntington Vall PA 19006-0662 215-947-2500 215-947-7464
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Vacuum measurement gage, sensors & their calibration.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 6/28/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Monday, August 05, 2013 Page 95 of 111
The Welding Warehouse 7654 Slauson Ave.
ST236596
Commerce CA 90040 323-889-8118
323-889-8297
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
For use by Sub-Tier only - See Vend NotesG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/14/2016
AMS 5826D No NoNo
Thermech Engineering Corp. 1773 W. Lincoln Avenu
36949
Anaheim CA 92801 714-533-3183
Mahendra Doshi
714-533-3420
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Teflon/Powder Coating; Compression Molding.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 2/26/2013
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEMS FOR PRODUCTION ISO-9002 Yes NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes NoNo
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
Thornton Plastics 745 Pacific Ave.
36951
Salt Lake City UT 84104 800-248-3434
Renee Thonton, President/Jean Eastham/Briton McConkre, Vice P
800-248-3494
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Plastic Vials
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/11/2015
video No NoNo
Thorsen's Precision Grinding 20 E. 6th St. Gate 1 PO
36952
WAYNESBORO PA 17268 717-765-9090 717-749-0300
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Purchasing core pins.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/2/2016
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 96 of 111
Tiodize Company, Inc 5858 Engineer Drive
43418
Huntington Be CA 92649-1166 732-247-9704
Gary Fox, Processing QA Manager;
732-828-8878
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Applicator of Chemical Products for the Metal Finishing Industry
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 8/17/2013
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
Titan Spring, Inc. 7300 Radford Avenue
36954
No. Hollywood CA 91605 818-755-3800
John Escobar, QA Manager/Jim Glenn, President
818-755-3803
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Springs, stampings, wireforms, and thin metal components.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/9/2016
SPRINGS No NoNo
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Tower Mfg. Co. 22426 So. Avalon Blvd.
36959
Carson CA 90745 310-830-7575
Mike Yates, Juan Arreus QA Manager
310-830-6564
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Tooling & machined parts. High tolerance Aerospace/Prototype machining
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/19/2015
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
Quality System AS9100B N/A Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
MACHINING GENERAL Yes NoNo
MACHINING CNC MILLING Yes NoNo
TOOL MAKING JIG & FIXT. BLDG. Yes NoNo
WIRE EDM Yes NoNo
PUNCH PRESS Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Monday, August 05, 2013 Page 97 of 111
Triax Tool & Machining, Inc. 2630 Lavery Ct., Ste E
36961
Newbury Park CA 91320 805-499-4543
Forest Andrews, President; Guillermo Brajas, QA Manager
805-499-5443
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Precision Machined Components- Limited use for Lockheed Martin - All PMM parts require a deliverable FAI or a FAI at Cooper.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
Approved (Limited)G&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 2/1/2016
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Yes NoNo
Tricor Industries, Inc. 290 Hansen Access Ro
36962
King of Prussia PA 19406 610-265-1111
Tony Villano, QC Manager/Anthony Villano, V.P.
610-962-0776
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Precision springs and wireforms.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/29/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
SPRINGS No NoNo
Trident Plating, Inc. 10046 Romandel Ave.
36963
Santa Fe, Sprin CA 90670 562-906-2556
L. Ian Holmberg, Operations Manager/ Paul R. Garcia, QC Manage
562-906-9646
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal plating, finishing.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/15/2016
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes NoNo
PRECIOUS METAL PLATING(GOLD) 999-261 SELREX Yes NoNo
ELECTROLESS NICKEL PLATE QQ-C-26074 Yes NoNo
NICKEL PLATING 999-310 Yes NoNo
NICKEL PLATING QQ-N-290 ELECTRO DEPOSITED Yes NoNo
COPPER PLATING MIL-C-14550 Yes NoNo
CAD/ELECTROLESS NICKEL PLATING 999-256 Yes NoNo
CADMIUM PLATING QQ-P-416 TYPE I,II Yes NoNo
PASSIVATION QQ-P-35 TYPE II Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
PASSIVATION/CLEANING MIL-S-5002 Yes NoNo
Monday, August 05, 2013 Page 98 of 111
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
SMPLG PROC. & TBLS BY VAR. FOR % NON-CONF. ANSI/ASQC Z1.9-1993 Yes NoNo
PRECIOUS METAL PLATING MIL-G-45204 TYPE I, CL 1 Yes NoNo
Tri-Star Electronics, Inc. 2201 Rosecrans Ave.
50269
El Segundo CA 90245 310-536-0444 310-536-9322
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
This 'Screw Machine' fabricating house will be manufacturing Custom and Military Contacts for us. They H/T & Plate as well.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/20/2013
GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 Type II, Class 1, Grade C No NoNo
COPPER PLATE, ELECTRODEPOSITED MIL-C-14550 Class 4 No NoNo
FINISH 5000-80-0033 No NoNo
HEAT TREAT, COPPER ALLOYS MIL-H-7199 No NoNo
Copper Plating AMS 2418 No NoNo
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Silver Plating ASTM B 700 No NoNo
Gold Plating mil-dtl-45204 Full and Selective No NoNo
Nickel Plating AMS-QQ-N-290 No NoNo
NICKEL PLATE (ELECTRODEPOSITED QQ-N-290 No NoNo
TRU-FORM IND. INC. 14511 ANSON AVE.
47555
Santa Fe Sprin CA 90670-5301 562-802-2041
DAVID MEEK, [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
CLIPS, BRACKETS, WIRE FORMS, STAMPINGS, LASER CUTTING, SPRINGS, ASSEMBLIES
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/8/2015
Quality System AS9100B No NoNo
Quality System ISO9001:2008 No NoNo
Monday, August 05, 2013 Page 99 of 111
Tube Service Co. 9351 S. Norwalk Blvd.
36967
Santa Fe Sprin CA 90670 800-776-8823
Dan Hollar, Group Mgr./Hugh Brown, Q.A. Mgr.
562-695-4027
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distrubtor of steel and aluminum tube and pipe.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/26/2015
TUBE BENDING/FORMING/MTL SPNNG Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
Turner & Seymour 100 Lawton St.
6170
Torrington CT 06790 (860)489-9214
Barbara
(860)482-3197
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Weldless Chain
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/29/2015
G & H BASIC QUALITY REQUIREMENTS FOR DISTRIBU No NoNo
Basic Cooper Quality Requirements No NoNo
Tyco Electronics 76 Commercial Ave
36923
East Providenc RI 02914 800 827-1939
William Hatton QA Mgr., Robert Sweeney Dir.Quality North Americ
800-471-3363
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Print 6 colors, die cut, laminate labels as blank labels and also pre-print barcode and custom design labels.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/23/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Quality System ISO9001:2000 No NoNo
Tyco Electronics/ Raychem 300 Constitution Drive
36969
Menlo Park CA 94025 866-314-7922
Rich Dvorak, I/S Sales Division Manager Kelly Dellinger, I/S Sales
866-314-8063
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Stamping, Molding, & Assembly
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/3/2015
Quality System AS9100B No NoNo
Monday, August 05, 2013 Page 100 of 111
Quality System ISO9001:2008 No NoNo
Calibration System ISO 10012-1 No NoNo
Uline 12575 Uline Drive
1104
Pleasant Prarie WI 53158
Kortney Hannes, [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Shipping supplies
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/8/2015
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Uline, Inc 12575 Uline Drive
7741
Pleasant Prairie WI 53158 800-295-5510
Kortney Hannes, [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Shipping Supplies
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/8/2015
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Uniquip 6401 Congress Ave
56795
Boca Raton FL 33487 561-988-9875
Steve Louder, Q.M. / Juri Zaizala, Pres.
651-892-0812
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Electronic Componets
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/7/2015
Quality System ISO9001:2000 N/A No NoNo
United States Brass & Copper 1401 Brook Drive
107183
Downers Grove IL 60515 630-705-3430
David Kavanaugh President, James Mallon Quality Manager
630-629-9350
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
metals servicenter (non-ferrous products) strip, sheet, rod, bar, plate
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/22/2016
Quality System ISO/TEC 17021 No NoNo
Quality System ISO9001:2008 No NoNo
Monday, August 05, 2013 Page 101 of 111
United Western Enterprises, Inc. 850 Flynn Road
36977
Camarillo CA 93012 805-389-1077
Jeff, QA Manager
805-389-1167
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Photochemical etching.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/5/2015
Passivation Treatments for Corrosion Resistant Steel QQ-P-35 Yes NoNo
Silver Plating QQ-S-365 Yes NoNo
PASSIVATE MIL-S-5002 Yes NoNo
Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
US Calibration 17922 Sky Park Cir., Su
48535
Irvine CA 92614 949-724-9474
Jim Simmons CEO, Richard Kappmeier QA Mgr.
949-724-9472
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Lab and On-site calibration services
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
G & H BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Calibration System ISO 17025:2005 No NoNo
Vaisala, Inc 10 D Gill St.
36982
Woburn MA 01801 800-408-9454
Karen, Cust. Service
781-933-8029
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Calibration of dewpoint sensors and related equipment. Environmental measurement Instruments.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 5/17/2013
PART 1-METROLOGICAL CONFIR. SYS. FOR MEASUR. ISO 10012-1/17025 No NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Genereal Requirements for the Competence of Testing and ISO17025:2005 No NoNo
ENVIRONMENTAL MANAGEMENT SYSTEMS ISO 14001:2004 No NoNo
Monday, August 05, 2013 Page 102 of 111
Valley Plating, Inc. 412 Albany ST
540
Springfield MA 01105 413-788-7375
Tim Martin, Quality Mgr.
413-788-4855
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Chemical Processing for Continental Machine Tool
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/21/2016
Quality System AS9100B No NoNo
Quality System ISO9001:2008 No NoNo
NADCAP- Standard Requirements AC7004 No NoYes
NADCAP - Painting and Dry Film Coatings AC7108/1 No NoYes
NADCAP - Painting and Dry Film Coatings AC7108/1 No NoNo
NADCAP - Chemical Processing AC7108 No NoNo
Nadcap AS7003 No NoNo
NADCAP - Chemical Processing AC7108 No NoYes
Valley Seal Company 6430 Variel Avenue #10
36983
Woodland Hills CA 91367 818-883-3505
Sue Falkenhagen, President/Susan L. Ellis, QA Manager/Pat Sant
818-883-0106
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
O-rings, gaskets, backups and other misc. seals in materials such as rubber, metal and PTFE.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/4/2015
RUBBER MOLDED GOODS Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
Vanart Engineering Company 3504 North River Road
36985
Franklin Park IL 60131 847-678-6255
Dan Mateja, Quality Mgr.
847-678-0443
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Spring Contacts
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/24/2016
PROGRESSIVE DIE No NoNo
PUNCH PRESS No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 103 of 111
Van's Manufacturing, Inc. 330 Easy Street
36986
Simi Valley CA 93065 805-522-6267
Louis Tignac, Owner/President; Ron Wargnier, QA Manager (vans
805-522-1654
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
CNC Machining
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 7/21/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
MACHINING LATHE TURNING No NoNo
MACHINING GENERAL No NoNo
Varga Enterprises 2350 S. Airport Blvd.
42614
Chandler AZ 85286 480-963-6936
George Varga President, Lynn Thompson Inventory Control Manag
480-899-0324
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
G & H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Ventura Heat Treating, Inc. 1950 Williams Dr., Ann
36996
Oxnard CA 93036 805-485-5954
Leon Jenkins, QA
805-485-4110
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Heat treat alloy steels and berillum.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/26/2013
HEAT TREAT CU & CU-ALLOYS MIL-H-7199 COPPER-BERYLLIUM No NoNo
HEAT TREAT ALLOY STEEL MIL-H-6875 CRS IND. SEL. No NoNo
SAND BLASTING No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
HEAT TREAT ALLOY STEEL MIL-H-6875 CRS No NoNo
Ver Sales Inc. 2509 North Naomi Stree
30339
Burbank CA 91504 818-567-3000
Danny Cebellos, Quality
818-567-3014
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Wire, Rope,Chain & Cable Assemblies
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 9/24/2013
Monday, August 05, 2013 Page 104 of 111
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
WIRE ROPE ASSEMBLIES, SWAGING MIL-DTL-6117 Yes NoNo
CABLE SWAGING/CABLE PRODUCTS Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
Verdugo Tool & Eng. Co. Inc. 20600 Superior Street
36998
Chatsworth CA 91311 818-998-1101
Kent Brown Gen Mgr / Robert Flores QA Mgr
818-998-3202
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal stamping, tool & die, lasercutting, wire EDM.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/6/2015
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
PUNCH PRESS Yes NoNo
PROGRESSIVE DIE Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
Veyance Tech. Inc. (Frmly: Goodyear Engineere 1144 E. Market St.
42328
Akron OH 44316 800-235-4632
Gilles Bilodeau, President Yves Faucher, QA Manager
800-762-4017
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Military Hose-Rubber.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/17/2016
RUBBER EXT,CALENDERING&COMP No NoNo
Quality System ISO9001:2008 No NoNo
Quality System AS9100B No NoNo
VALVE AND HOSE ASSYS No NoNo
RUBBER MOLDED GOODS No NoNo
Videojet Technologies, Inc 1500 Mittel Blvd
12213
Wood Dale IL 60193 800-843-3610
VTI_DomesticCS <[email protected]>
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
ALL ink from this vendor is to have CoC. and labeled as Age Sensitive Material.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/22/2016
Quality System ISO9001:2008 No NoNo
Monday, August 05, 2013 Page 105 of 111
W & W Manufacturing 426 W. Magnolia
37002
Glendale CA 91204 818-241-4431
Ed Wallen, President/Mel Pechter, Q. A. Manager
818-241-4447
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Screw machining.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/16/2016
BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
MACHINING GENERAL Yes NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. MIL-STD-105 Yes NoNo
CALIBRATION SYSTEMS REQUIREMENTS MIL-STD-45662A Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
W. L. Gore & Associates Nordring 1
37003
Pleinfeld, Germ 91785 610) 268-1000
Reinhard Schellhaase
(610) 268-1790
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mini Coax Cable. Cable, Cable assemblies, Components for electrical and optical interconnects and Aircraft sealants.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 11/26/2015
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
Wacker Chemical Corp (Precision Silicones, Inc) 13910 Oaks Avenue
37005
Chino CA 91710 909-590-8822
Sudipta Das, QA Manager/Axel Schmidt, President.
909-627-2926
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Customized silicone rubber.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/2/2016
RUBBER EXT,CALENDERING&COMP Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Wafco Gage Company 16629 Gramercy Place
37006
Gardena CA 90247 310-532-3106
Jesse Vales, QA Mgr.
310-532-0922
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Custom gages.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/22/2016
GAGES No NoNo
Monday, August 05, 2013 Page 106 of 111
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
Wassco Corp. 12778 Brook Printer Pl
7792
Poway CA 92064 310-787-3030
Scott Codispoda, Inside Sales/Ed Durfey, President/Al Rios, V.P.
310-787-3031
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Dist. Of production supplies (soldering equipment).
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/8/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Wesco Aircraft Hardware Corp. (Frmly: Airtech 3851 Webb Road
36680
Wichita KS 67226 316-315-1241
Mike Battenfield Quality Director, Sven St.Peter Quality Manager
316-315-1289
Process:
Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Assembly & Distribution of Interconnect and Electromechanical Products.Interconnect/Electrical Mechanical…..Glenair, Airborne, Radial, Deutsch, Aero Electric Approved. Value Added Assembly lines for Deutch and Aero Electric
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/3/2015
Model for Aerospace Quality Assurance Systems AS9100 Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
MACHINING EXOTIC MATERIAL Yes NoNo
MACHINING SWISS SCREW MACHINE Yes NoNo
West Coast Gasket 300 Ranger Ave.
2973
Brea CA 92821 714-869-0123
Louis Russell, Owner & President/Steve Crowley, Quality Mgr.
714-869-0122
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Various sealing devices.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/13/2013
CAL LABS/MEASURE AND TEST EQUIP. GEN. REQ. ANSI/NCSL Z540-1 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A No NoNo
QUALITY SYSTEM REQUIREMENTS MIL-Q-9858A No NoNo
SMPLG PROC. & TBLS FOR INSP. BY ATTRIB. ANSI/ASQC Z1.4-1993 No NoNo
Monday, August 05, 2013 Page 107 of 111
West Coast Metal Stamping (Form: B & J Tool & 550 West Crowther Ave
37049
Placentia CA 92870 714-792-0322
Jerome Reinhart, President/Dan Totom, Q.A. Mgr.
714-792-0329
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Metal stampingElectrolurgy, Inc. for Passivation QQ-P-35, Gold Plate MIL-G-45204,Electoless Nickel MIL-C-26074, Cad QQ-P- 416
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/10/2015
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 Yes NoNo
GOLD PLATE, ELECTRODEPOSITED MIL-G-45204 Yes NoNo
NICKEL PLATE, ELECTROLESS MIL-C-26074 Yes NoNo
Passivation Treatments for Corrosion Resistant Steel QQ-P-35 Yes NoNo
West Coast Plastics Equipment, Inc. 6122 W. Washington Bl
48220
Culver City CA 90232 323-870-7733
Richard Coates, [email protected]
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Distributor of equipment & parts for the plastics, packaging & related industries
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/8/2015
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
BASIC QUALITY SYSTEM REQUIREMENTS No NoNo
Western Aerospace Inspection 1376 Walter St., Unit 7
W08851
Ventura CA 93003 805-644-3882
Jamie Lagos, QC Manager; Benito Lagos, President
805-656-2027
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Liquid Penetrant, Magnetic Particle and Radiographic Examination.
See vendor file for detailed NADCAP approval scope
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/12/2015
NADCAP - Testing Facility Film Radiography AC7114/4 No NoNo
NADCAP NonDestructive Testing AC7114 No NoNo
NADCAP -NDT AS7003 No NoNo
NADCAP - Testing Facility - Ultrasonic AC7114/3 No NoNo
STANDARD PRACTICE FOR LIQUID PENETRANT TESTI ASTM E 1417 No NoYes
Monday, August 05, 2013 Page 108 of 111
Western Fibre Products 10924 Vulcan Street
37008
South Gate CA 90280 562-861-6665
Louis Guida, President/Tom Bosso, QC Manager/James Tyrolt, Sal
562-862-9692
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machined plastics.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 12/17/2015
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
MACHINING EXOTIC MATERIAL Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Westex Co. 306 Cactus Dr.
Sub-Tier
Oxnard CA 93036 805-485-2205
Mike Lupo, Quality Assurance Manager
805-485-9323
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
For Use as Sub-Tier Supplier Only. Used by Hales Engineering for dye penetrant inspection.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
For use by Sub-Tier only - See Vend NotesG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 3/28/2014
ISO17025 For use by Sub-Tier only No NoNo
Visible Dye Penetrant Inspection No NoNo
Whaling West Packaging Corporation 2574 Turquoise Circle
37011
Newbury Park CA 91320 805-499-8759
Valentina Whaling, QA Manager
805-499-1984
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Military and commercial packaging and crating.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/9/2016
PACKING & PACKAGING Yes NoNo
BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
INSPECTION SYSTEM REQUIREMENTs MIL-I-45208A Yes NoNo
Whitmor Wirenetics 27737 Avenue Hopkins
37014
Valencia CA 91355 661-257-2400
Michael Weiss, President Stella Reaza, QA Manager
661-257-2495
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Wire & cable specialist.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 12/11/2015
Model for Aerospace Quality Assurance Systems AS9100 No NoNo
ELECTRICAL CABLE FABRICATION No NoNo
Monday, August 05, 2013 Page 109 of 111
Quality System ISO9001:2008 No NoNo
Willson Scientific Glass Inc. 528 E. Fig Ave.
37016
Monrovia CA 91016 626-303-1656
Janice Palmer, Office Manager, Robert Willson President, Brent Pa
626-303-0599
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Custom hermetic glass sealing.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 1/24/2016
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
OUTGASSING (VACUUM BAKE) Yes NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
Wire Pro 9231 Eton Avenue
37018
Chatsworth CA 91311 818-998-5577
Robert Hynes, President.
818-998-5108
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Wire and edm manufacturing.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 11/17/2013
G&H BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
WIRE EDM Yes NoNo
INSPECTION SYSTEM REQUIREMENTS MIL-I-45208A Yes NoNo
Y & D Rubber Co., Inc. 1451 South Carlos Ave
46865
Ontario CA 91761 909-947-9900
Trinidad, Quality Control
909-947-9929
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 4/20/2015
Quality System ISO9001:2008 No NoNo
Yokogawa Corp. (Ando Prod. Service) 2 Dart Road
13366
Newman GA 30265 770-254-0400
D. Johnson CEO, Dale Griffin Corporate QA Mgr.
770-254-0928
Process:Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Mfg, sales and service, metering instrumentation, test & measurement equipmentField Instruments, Analyzers, Digital Acquisition, Test and Measurement, Meters and Instruments.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/2/2016
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Monday, August 05, 2013 Page 110 of 111
Zemarc 6431 Flotilla Street
79753
Los Angeles CA 90040
Tim Prichard QM
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 10/8/2015
BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Quality System ISO9001:2008 No NoNo
Zero Manufacturing 500 West 200 North
16439
North Salt Lake UT 84054 801-298-5900
Brent Skinner VP Oper. / Jolene Kawa QA Dir.
801-298-5900
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Manufacture housings and aluminum castings.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:No No Survey Due: 1/10/2016
QUALITY SYSTEM FOR DESIGN, DEVELOP & PROD. ISO-9001:2000 No NoNo
G&H BASIC SUPPLIER QUALITY REQUIREMENTS No NoNo
Zet-Tek, Inc. 22951 La Palma Ave
37022
Yorba Linda CA 92887 714-777-8770
Dan Zettler, President & Owner/Sandra Rubino, V.P. Operations.
714-777-9077
Process: Spec. Type/Class/Limit LMFBM LM_DenverNAPCAP
Machined parts.
Contacts:SAP ID#: Approved for Use: Yes
Process Expires Date:
ApprovedG&H Status:
Vendor Notes:LMFBM Supplier: LMDenver Supplier:Yes No Survey Due: 8/31/2013
BASIC SUPPLIER QUALITY REQUIREMENTS Yes NoNo
MACHINING - SWISS SCREW MACHINE Yes NoNo
Monday, August 05, 2013 Page 111 of 111