Transcript
Page 1: Ammanford, SA18 3SJ ENDURANCE - Quinshieldproof to BS 1203. Other materials can be used to satisfy different structural/insulation requirements. Large panel areas are suitably reinforced

TECHNICALSPECIFICATIONENDURANCE

ProductsGRP

END

UR

AN

CE

Due to our policy of maintaining a continuous review of product performance and materials ofconstruction we reserve the right to amend the design and dimensions of the products illustrated inthis publication at any time and without prior notice.

Quinshield ltdCapel HendreAmmanford,CarmarthenshireSA18 3SJ

Tel: 01269 832220Fax: 01269 832221email: [email protected]

Quinshield ltdCapel HendreAmmanford,CarmarthenshireSA18 3SJ

Tel: 01269 832220Fax: 01269 832221email: [email protected]

® ®

The Endurance RangeThe specifications of our Endurance Range provide extensivescope for the supply of purpose built kiosks, designed to meetcustomer requirements, suitable for a variety of applications andwidely contrasting environmental considerations.

Standard SizesWIDTHExternal - from 750mm in 250mm steps to 50 metres.DEPTHExternal - from 500mm in 250mm steps to 12 metres.HEIGHTInternal - 1200, 1400, 1650, 1900, 2150, 2300, then in 100mm stepsto four metres. Other/larger dimensions can be quoted.

Standard ConstructionMoulded in Glass Reinforced Polyester (GRP) compositeconstruction, totally encapsulating a rigid core. GRP laminate ismade from fire retardant structural polyester resin reinforced withchopped strand matt glassfibre.

Standard core material is 12mm thick plywood, weather and boilproof to BS 1203. Other materials can be used to satisfy differentstructural/insulation requirements. Large panel areas are suitablyreinforced to maintain structural stability.

Designed to comply with CP 3: Chapter 5/BS 6399 part 1, 1984 wind,snow and seismic loadings and all other relevant British Standards.

Standard fixing is through reinforced internal GRP flanges by expandingbolt system onto prepared bases. External flanges can be provided.

Life expectancy is in excess of 30 years.

FinishesExternal: Satin finish - choice of any colour from the BS 4800range or the RAL range.

A coloured isophthalic resin (Gelcoat) forms the external barriergiving an excellent weather and chemical resistance in theharshest of environments.

Standard internal finish is a white fire retardant resin. Otherinternal finishes can be provided.

DoorsAn extensive range of door sizes is available. Located in width ordepth walls, central or offset.

Stainless steel (316) hinges are fitted to all doors. Hinges are fittedwith stainless steel security fasteners in such a manner that theycannot be removed from outside the kiosk.

External FinishOptimum use of quality materials combined with thecompany’s skills and flexibility in the design andmanufacture of moulded GRP (Glass ReinforcedPolyester) composite structures ensures that a superiorand durable external surface finish is consistentlyachieved. The smooth moulded satin gelcoat finish isavailable in any colour from the BS 4800 or RAL range.Quinshield also design and manufacture ‘TraditionalAppearance’ finishes such as Simulated Brick or Stone.Details are demonstrated in our separate ‘TraditionalRange Brochure’.

ScopeBy providing a high standard of quality in design,manufacture and customer service at competitive pricesQuinshield has developed a strong position among itsmany clients in the market for GRP kiosks and buildings.

The extensive range varies from small basic kiosks to largemulti-feature buildings.

After sales back-up plays a key part in our customer service.A first class package from design to delivery and installation.

Customised FeaturesMany optional features can be incorporated into our kiosks and buildings to provide the ideal‘PACKAGE FOR THE CUSTOMER’.

Mounting BoardsPartitionsUnistrutsInspection WindowsCable Entry ‘Cat Flap’ DoorsRemovable PanelsAccess HatchesGland PlatesOptional Locking SystemsApertures and CowlsVentsCustomer LogosPre-lnstallation of Customer Equipment

Door LockingStandard locking is by cylinder nightlatch lock or stainless steel(Grade 316) Hasp and staple.Alternatively: Locking to suit customer specification.

InsulationStandard construction provides ‘U’ value 2.2 W/m2CO. Higherlevels of insulation can be offered to meet building regulationsor specific requirements.

Fire RatingPanel construction complies with BS 476 Part 22, half hour fireresistance (Retention of stability, integrity and insulation).Fire retardant resin is used to provide self extinguishinglaminates to BS 476 Part 7 Class 2 (Surface spread of flame).Other fire ratings can be provided.

Sound AttenuationStandard composite core construction achieves noiseattenuation of 24dBA over octave band centre frequency range of31.5Hz to 8KHz measured at 1.0m distance from wall. Otherlevels of attenuation up to 30dBA nominal acoustic performancecan be offered by use of different constructions.

Environmental ProtectionDust, weather and splash-proof to a minimum of IP 54 protection rating.Higher degrees of protection can be provided to IP 55 and IP 65.

VentilationAdequate natural ventilation can be provided by means ofintegral vents, fitted with bird and vermin screens. Forcedventilation to meet specific requirements can be provided bysuitable fans, complete with external weatherproof GRP cowl.Heating, air-conditioning and de-humidification can be provided.

ElectricsAll electrical installations are in accordance with the lEE regulationscurrent editions, encompassing domestic to Zone 1 as required.

Floors/basesSeveral options are available, ranging from integral compositeconstruction floors to steel channel baseframes complete withsteel plate decking.

QualityAll manufacture and customer service is controlled by an effectivequality assurance system, in line with the recommendations of BS 5750/ISO 9000.

Other productsQuinshield ltd also design and manufacture a comprehensiverange of other products (Details on separate brochures).

Page 2: Ammanford, SA18 3SJ ENDURANCE - Quinshieldproof to BS 1203. Other materials can be used to satisfy different structural/insulation requirements. Large panel areas are suitably reinforced

Quinshield®

FIXING FLANGE

EXPANDING TYPEANCHORS

CONCRETE PLINTHOR SLAB

The ProductThe Endurance Range of purpose-built GRPkiosks and buildings provides a limitless choiceto Quinshield’s clients.

A superb smooth moulded satin exterior finish isavailable in any colour from the BS 4800 or RALrange.

Sizes and features are tailored to suit customerrequirements. The infinite scope extends fromsmall compact kiosks to large span buildings upto 50 metres length.

AdvantagesOur GRP kiosks and buildings are designed and manufacturedto provide the most effective and economic solution to customerrequirements.

Smooth moulded exterior finishesChoice of coloursExtensive scope of size optionsGood aesthetic appearanceSuperior quality at competitive pricesDurability and long service lifeMaintenance free materialsDesigned to withstand wind, snow and seismic loadingsWeather and corrosion resistanceRobustness and securityPurpose built featuresVersatility to suit customer needs and different locationsSpeed of delivery and installation by a specialist supplierEasy to relocate and extendReduction in site costs compared to conventional building methods

Applications

Quinshield’s GRP kiosks and buildings are suppliedthroughout the UK and overseas, servicing a widerange of clients, functions and conditions.

Typical applications include:

Switchgear AnalysersControl Equipment MetersGenerators Gas RegulatorsCompressors TransformersPumps and Valves CommunicationsRadio Stations ElectronicsSubstations Chemical TreatmentTelemetry

VersatilityAs a result of innovative research, design andmanufacturing techniques, Quinshield is able to providean infinite variety of features to suit many differentapplications and particular customer requirements.

Thermal InsulationFire ResistanceSound ProofingElectrical InstallationNatural/Forced VentilationAir ConditioningLoad Bearing Floor/BasesExplosion Relief

Delivery and InstallationA comprehensive delivery and installation serviceis provided. Delivery methods depend on productsize and site access.

Delivery is normally ready built and offloadingis by Hiab Vehicle subject to site access Delivery is carried out in panel form for largerkiosks or in difficult locations, for assembly onsiteFor export contracts, kiosks are normallyloaded into shipping crates or containers fordespatch abroadOn site installation is by our skilled andexperienced specialist teamEase of installation greatly cuts down workand cost on site, par ticular ly in remotesituationsClose liaison is maintained with our clients toensure effective organisation of delivery andinstallationCranage and special handling are used asnecessaryQuinshield has the flexibility and expertise toadapt to the particular demand of all types ofsite situations or conditions.


Top Related