Download - Alucobond Tech Guide2
-
8/12/2019 Alucobond Tech Guide2
1/4
Technical Guide
The Worlds FavoriteAluminum Composite Material
-
8/12/2019 Alucobond Tech Guide2
2/4
Global Brand Leader
Polyethylene orFire Retardant Core
0.020"NominalThicknessAluminum Skin
Coil Coated Paintor Anodized Finish
uco on s t e or g na a um num compos te mater a an s t e
referred architectural cladding for faade and corporate identity application
lucobond Material is available in a wide range of options and dimensions
hat can be tailored to your specific project. With its hallmark superior flatne
uco on o ers an extens ve se ect on o stan ar an custom n s es t
span t e co or spectrum.
ys ca ropert es
Material Composition
Aluminum facings in 0.020" nominal thickness (interior and exterior to ensure fl
Polyethylene core available in 3mm, 4mm and 6mm thicknesses (PE)
Proprietary fire-resistant core available in 4mm thickness only (Plus)
Panel Widths Panel Lengths
Standard widths 50" and 62" coil coated) Standard lengths 122", 146" and 19
Standard widths 50" and 62" anodized) Custom lengths up to a maximum o
ustom w t
Minimum Bending Radius
he minimum bending radius of Alucobondan uco on us w t out rout
nter or s n s t mes t e t c ness o t e mater a .
Available Finishes
,
o yester
Modified Polyester
Anodized
Monochromatics, Micas and Metallics
atura
U.S. Xp
Chattan
RIVERVIEW II
Chicago, IL
-
8/12/2019 Alucobond Tech Guide2
3/4
ec n ca ata Alucobond Alucobond Plus
c ness mm us
Nominal Weight (lbs/sq.ft) 0.92 1.12 1.59 1.52
Coefficient of Expansion x10 - (in./in.F) .31 .18 .24 .
emperature Resistance -55 to 175 F (-50 to 80 C)
Minimum Peel Strength mm mm
Tests and Building Codes
Guided by the most comprehensive technical support team in the industry, Alucobond
ma nta ns constant an r gorous co e comp ance. rom conceptua v s on to n s e
project, the Alucobond sales and service professionals will guide you through the process.
North American Building Code Acceptance
uco on an uco on us are accepte y t e o ow ng co e regu atory o es:
IBC
City of New York
City of Los Angeles
Miami-Dade County Florida
National Building Code of Canada (1998)
State of Florida
Material Code Tests
uco on as success u y passe t e o ow ng tests:
ASTM E 84 Surface burning characteristics
ASTM D1929 Ignition properties
ASTM D1781 Peel strength
NFPA 285 Intermediate scale multi-story (Alucobond Plus only)
Mamaroneck High School
Mamaroneck, NY
UNIVERSITY OF
CALIFORNIA
Riverside, CA
GEORGIA AQUARI
Atlanta, GA
-
8/12/2019 Alucobond Tech Guide2
4/4
3A Composites proudly partners with the most trusted, proven fabricators and installers in the metal wall panel
industry. These experts will transform AlucobondMaterial into the cladding system best suited for your design
and application. The systems illustrated here are representative of typical attachment methods.
There are three ways to contact a sales representative or get more information includingsamples, literature and binders:
1 a . .
2 Complete the Contact Us link at www.AlucobondUSA.com
3 Email [email protected]
In as much as the design, construction, installation and all techniques relating to the various uses o lucobond aterial and lucobond
lus aterial are under the control o
the purchaser, re erences contained in this brochure to such matters are or concept purposes only. he uses o lucobond aterial and lucobond
lus aterial and all activi-
ties relating thereto are the responsibility of the purchaser and not the responsibility of 3A Composites USA Inc. Nothing contained herein is intended to or shall be construedas a warranty, express or implied, as to lucobond
aterial and lucobond
lus aterial. echnical in ormation with re erence to lucobond
aterial and lucobond
lus
aterial test results can be obtained by writing omposites U Inc. lways consult local building codes be ore use.
Attachment Methods
Rout & ReturnDry Seal
Rout & ReturnWet Seal
Rain Screen
3A COMPOSITES USA [email protected]