Complies with all major international standards: UL-864, EN-54, GOST, IS 1220, CE
ADR-3000TM
Analog Addressable Internet Enabled Fire Alarm Control Panel
Features
Modularity
Flexible Capacity
Small Basic Unit
Networking Capability
Internet Ready
Advanced Activation Matrix
Alarm Response Time
PC Control
Programmability
Remote Programming
Protected Access
Distributed intelligence
User Friendly
Large LCD Display
Drift Compensation
Day and Night Sensitivity Setting
Maintenance Alarm
Event Memory
Class “A” or “B” Operational modes
High Survivability
Automatic Device Programming
EMC Tested
1 to 128 loops, each with 127 addresses
From 127 to 16,256 addresses
Configurable 1 to 4 loops
Linking as many as 32 control panels
Optional module adds monitoring and notification capabilities: ■ Web Server ■ E-mail notification■ SMS paging ■ Fire Alarm monitoring via LAN/WAN/Internet
Activates any output / relay according to specific logical combination of input devices / zones / control panels
Less than 1 second
Device programming, system control, map display and maintenance based on Telefire’s proprietary TCS-3040 software, via a standard RS-232 interface
All paprameters entered from front panel (does not require a PC)
Software update and control (optional)
Password-protected authorized access
Embedded signal processing in the detector and control panel
Operations and Maintenance
Alphanumeric 4X40 characters illuminated display indicating major events, alarm, fault, etc.
Keeps sensitivity setting stable during enviromental changes and detector compensation
Flexible adoption to the protected site’s working hours
A recommendation to clean detector
Accumulate history of alarm and fault events
Programmable as required
High noise immunity and automatic recovery
Auto recognition of devise address and type
Industrial CE Approved
P.O.B. 7036, Petach Tikva 49250, IsraelTel: +972 3 970 0400Fax: +972 3 921 1816Email: [email protected]
