Download - ABB Product Range
-
8/9/2019 ABB Product Range
1/44
-
8/9/2019 ABB Product Range
2/44
-
8/9/2019 ABB Product Range
3/44
-
8/9/2019 ABB Product Range
4/44
-
8/9/2019 ABB Product Range
5/44
-
8/9/2019 ABB Product Range
6/44
-
8/9/2019 ABB Product Range
7/44
-
8/9/2019 ABB Product Range
8/44
-
8/9/2019 ABB Product Range
9/44
-
8/9/2019 ABB Product Range
10/44
-
8/9/2019 ABB Product Range
11/44
-
8/9/2019 ABB Product Range
12/44
-
8/9/2019 ABB Product Range
13/44
-
8/9/2019 ABB Product Range
14/44
-
8/9/2019 ABB Product Range
15/44
-
8/9/2019 ABB Product Range
16/44
-
8/9/2019 ABB Product Range
17/44
-
8/9/2019 ABB Product Range
18/44
-
8/9/2019 ABB Product Range
19/44
-
8/9/2019 ABB Product Range
20/44
-
8/9/2019 ABB Product Range
21/44
-
8/9/2019 ABB Product Range
22/44
-
8/9/2019 ABB Product Range
23/44
-
8/9/2019 ABB Product Range
24/44
-
8/9/2019 ABB Product Range
25/44
-
8/9/2019 ABB Product Range
26/44
-
8/9/2019 ABB Product Range
27/44
-
8/9/2019 ABB Product Range
28/44
-
8/9/2019 ABB Product Range
29/44
-
8/9/2019 ABB Product Range
30/44
-
8/9/2019 ABB Product Range
31/44
-
8/9/2019 ABB Product Range
32/44
-
8/9/2019 ABB Product Range
33/44
-
8/9/2019 ABB Product Range
34/4434 Robotics | Product Range
Painting Equipment
Color Change Unit
2K Mixer Unit
GearPump Unit
Compact CBS Unit
M-PAC Color Change Module & Gear Pump Module
IRB 5320 Workpiece Positioner
Color Change Unit
ABBs color change uni ts are specif ically designed for fa st color change. The interna l bores of the color change
unit are without dead-ends, reducing the cleaning cycle to a minimum. Both plastic and steel versions are
available, with or without recirculation. The ABB color change units are compatible with solvent based and
water borne paint materials used in 1K and 2K systems.
2K Mixer Unit
ABBs 2K mixe rs are specifically designed for p recise mixing of two component fluid s and opt imized for fa st
material change. The 2K mixer unit is using the same fluid valves as in the color change unit (common parts).
2K mixer unit is designed and optimized to be used in combination with ABBs gear pumps (and IPS software).
GearPump Unit
ABBs precision paint pump provides const ant and consis tent fluid regu lation for automat ic coating applications.
It is specifically designed for fast color change. The ABB gear pumps can be used for paint, catalyst and clear
coat and are available in sizes: 1.2 cc/rev, 3 cc/rev, 6 cc/rev and 9 cc/rev. The compact design uses light weight
materials and is optimized for low material waste and color change time.
Compact CBS Unit
The compact CBS is an op timized solut ion for internal charge waterborne materials. This CBS unit is used
to prepare and change the paint cartridges in the CBS bell atomizer which is handled and controlled by the ABB
paint robot. It is a cost effective solution, and contains up to six stations. It can use both dedicated and flushable
cartridges. Dedicated cartridges are in most cases used for high-runners and offer minimum color change waste
(typically less than 5 ml). Flushable cartridges are used when the cartridges are connected to a color change unit
for changing the paint material in the same cartridge. Color change waste in a flushable cartridge is slightly more
than with dedicated cartridges (< 30 ml).
M-PAC Color Change Module
The modular concept of the new M-PAC paint application equipment makes it ea sy t o combine the various
components to build compact and light units for integration on the robot arms. This enables for the robots to use
high acceleration and the application solution to have minimum material waste. The picture shows a color change
module mounted directly on a gear pump module for maximum paint savings and minimum color change time. This complete assembly is designed to be integ rated in the robot with t he shortest possible supply li ne to the
atomizer (typically less than 650 mm).
IRB 5320 Workpiece Positioner
The IRB 5320 Workpiece Posi tioner is a manipulator that is integrated with a six-ax is paint robot , simplifying the
painting process. It operates with either one or three axes. The three-axis version of the IRB 5320 is used to
precisely position workpieces for painting. The turntables are controlled by the fully-integrated robot servo unit
alternating as the loading/unloading station and as the place where the robot paints the workpieces. This single-
axis positioner is built, with precision and reliability, on the proven ABB robotics gear box and delivered in several
thousand units prior to this introduction.
-
8/9/2019 ABB Product Range
35/44
-
8/9/2019 ABB Product Range
36/44
-
8/9/2019 ABB Product Range
37/44
-
8/9/2019 ABB Product Range
38/44
-
8/9/2019 ABB Product Range
39/44
-
8/9/2019 ABB Product Range
40/44
-
8/9/2019 ABB Product Range
41/44
-
8/9/2019 ABB Product Range
42/44
-
8/9/2019 ABB Product Range
43/44
-
8/9/2019 ABB Product Range
44/44