FLEXIBLE METALLIC CONDUITS7-1 Flexible Liquid Tight Conduits7-2 Flexible Steel Conduits7-3 Pre-Wired Flexible Liquid Tight Conduits7-4 Pre-Wired Flexible Steel Conduits
7
SEC7.indd 2 5/16/09 4:16:12 PM
FLEX
IBLE
MET
ALLI
C CO
ND
UIT
S
7
7-1 FLEXIBLE LIQUID TIGHT CONDUITS
Trade size ID Steel (in) OD Steel (in)
Approx.Steel
Weightper 100FT.
MinBend
Radius
Approx. Feet Per Standard
Pkg.ITEM NUMBER
Min Max Min Max (lb) (in)
1/2” 0.622 0.642 0.732 0.765 24.8 2 100 27021002
3/4” 0.820 0.840 0.930 0.960 32.2 2-3/4 100 27021003
1” 1.041 1.066 1.201 1.226 51.6 5 100 27021004
1-1/4” 1.380 1.410 1.540 1.570 68.0 6 100 27021005
1-1/2” 1.575 1.600 1.865 1.900 92 - 50 27021006
2” 2.020 2.045 2.340 2.375 140 - 50 27021007
Other sizes are available on request, Please consult our sales department.
NON - UL TYPE
Features
Applications
• Extra felxible for extra easy use
• Corrosion resistance steel core for lasting mechanical protection
• Durable, abrasion resistance PVC jacket will not wrinkle or shrink from cut ends
• Complete protection against most liquids and moisture vapor
• Resists sunlight, heat, oil and chemical degradation
• Smooth interior for easy wire pull-thru
• Easily cut to length on the job
• Accepts standard liquid tight connectors
• Delivers long lasting wiring protection where listed products are not required
• Generally applicable temperature range: -20°C to +50°C (-5°F to +122°F)
• Electrical raceways where listed products are not required
• Seals out abrasives, alcohol, coolants, corrosive fumes and gases, dirt, grease,
mineral acids, non-concentrated fixed alkalines, petroleum oils, salt air spray,
water and weather
• Used in industrial and commercial applications for conveyors, blowers, cranes,
hoists, air conditioners, machine tooling and lubrication equipment
• For exposed or concealed installations requiring movement, crossover
connections, or tight bends
109
SEC7.indd 3 5/16/09 4:16:46 PM
FLEXIBLE METALLIC
CON
DU
ITS
7
7-1 FLEXIBLE LIQUID TIGHT CONDUITS
Trade size ID Steel (in) OD Steel (in)
Approx.Steel
Weightper 100FT.
MinBend
Radius
Approx. Feet Per Standard
Pkg.ITEM NUMBER
Min Max Min Max (lb) (in)
1/2” 0.622 0.642 0.732 0.765 24.8 2 100 27021052
3/4” 0.820 0.840 0.930 0.960 32.2 2-3/4 100 27021053
1” 1.041 1.066 1.201 1.226 51.6 5 100 27021054
1-1/4” 1.380 1.410 1.540 1.570 68.0 6 100 27021055
1-1/2” 1.575 1.600 1.865 1.900 116 - 50 27021056
2” 2.020 2.045 2.340 2.375 156 - 50 27021057
Other sizes are available on request, Please consult our sales department.
UL TYPE
Features• Galvanized steel core for lasting mechanical protection• Durable, abrasion resistance PVC jacket will not wrinkle or shrink from cut ends• Exceptional crush proof qualities• Smooth interior for easy wire pull-thru• Complete protection against most liquids and moisture vapor• Resists sunlight, heat, oil and chemical degradation, Rated: -20°C to +50°C (-5°F to +122°F)• Accepts standard UL listed liquid tight connectors• The armor is approved as an equipment ground in sizes 1/2” through 1-1/4”• Superior protection for circuits located in hostile environments• Complies with UL standard 360• Suitable for use in hazardous locations per NEC Articles 500 Class 1, Div 2; Classes 2 and 3• Copper bond wire in 1/2” - 1 1/4”
110
Applications• Electrical raceways where listed products are required• Used in industrial and commercial applications for conveyors, blowers, cranes, hoists, air conditioners, machine tooling and lubrication equipment• Where the conditions of installations, operation, or maintenance require flexibility or protection from liquids, vapors, solids or weather• Applications requiring movement, crossover connections or tight bends• Exposed or concealed locations• For flexible connections to swimming pool, spa and hot tub motors• Electric signs and outline lighting supply and secondary-cricuit• Permitted for equipment grounding in sizes 1/2” through 1-1/4” in lengths not exceeding 6 feet per NEC 250.118(6)• Floating building feeders and services• Boatyards & Marinas
SEC7.indd 4 5/16/09 4:17:02 PM
FLEX
IBLE
MET
ALLI
C CO
ND
UIT
S
7
7-1 FLEXIBLE LIQUID TIGHT CONDUITS
ConduitSize(mm)
OutsideDiameter
(mm)
InsideDiameter
(mm)
Packing1
(m)ITEM NUMBER
16 17.8 12.6 50 27110216
20 21.1 16 50 27110220
25 26.4 21 50 27110225
32 33.1 26.5 50 27110232
1 Other packing is available on request.
Other sizes are available on request, Please consult our sales department.
IEC TYPE
Features• Galvanized steel PVC coated and manufactured according to IEC 61386-23
• Color grey, other colors available on request
• High mechanical strength
• Good flexibility
• IP rating: IP66 + IP67 + IP68 (5 bar)
• Smooth
• Wipe clean outer cover
• Cover does not wrinkle when bent
• Temperature range: -20°C to + 105°C
• Resistant to oils and greases
• UV resistant (black) and suitable for external use
111
Applications• Electrical raceways where IEC products are required
• Seals out abrasives, alcohol, coolants, corrosive fumes and gases, dirt, grease,
mineral acids, non-concentrated fixed alkalines, petroleum oils, salt air spray,
water and weather
• Used in industrial and commercial applications for conveyors, blowers, cranes,
hoists, air conditioners, machine tooling and lubrication equipment
• For exposed or concealed installations requiring movement, crossover
connections, or tight bends
• Machine tools or outdoor installations where liquid tight is a requirement
SEC7.indd 5 5/16/09 4:17:16 PM
FLEXIBLE METALLIC
CON
DU
ITS
7
7-2 FLEXIBLE STEEL CONDUITS
Trade size Diameter (in)Min
BendRadius
Approx. Weight of 100Ft.
Approx. Feet Per Standard Pkg. ITEM NUMBER
ID Greater than OD Less than (in) (lb)
1/2” 0.625 0.920 2 21.7 100 27011002
3/4” 0.812 1.105 3 27.5 100 27011003
1” 1.000 1.380 3.5 36.4 50 27011004
1-1/4” 1.250 1.630 4 43.2 50 27011005
1-1/2” 1.500 1.950 4.5 50.1 25 27011006
2” - - - - 25 27011007
Other sizes are available on request, Please consult our sales department.
NON - UL TYPE
Features• Steel construction
• Hot dip galvanized zinc coating wont flake or peel
• Corrosion resistant
• Smooth interior for easy wire pull-thru
• Lightweight for easier handling
• Easy installlation to follow contours
• Built in felxibility for simplified positioning
• Crush resistant
• Standard connectors available from leading manufacturers
112
Applications• Electrical raceways where listed products are not required
• Power and lighting branch circuit conductors and cables for connecting receptacles, luminaires, equipment, office partitions etc.
• Motor feeder, branch, control circuit conductors and cables
• Remote-control, signaling and power-limited circuit conductors and cables
• Fire alarm system conductors and cables of power-limited or non-power-limited fire alarm circuits
• Voice, data, communications and video cables including CATV and optical fiber cables
• Environmental air-handling spaces
• Concealed or exposed installations
• Elevators, hoistways and escalators
• As a grounding conductor for lengths up to 6 feet (20A max)
• Electric Signs and outline lighting
• Raised floors for connection of information technology
• Places of assembly and theaters
• Cranes and hoists
SEC7.indd 6 5/16/09 4:18:12 PM
FLEX
IBLE
MET
ALLI
C CO
ND
UIT
S
7
7-2 FLEXIBLE STEEL CONDUITS
Trade size ID Steel (in) OD Steel (in)Min
BendRadius
Approx. Weight of 100Ft.
Approx. Feet Per Standard Pkg. ITEM NUMBER
Min Max Min Max (in)
1/2” 0.625 0.645 0.860 0.920 3 27 100 27011052
3/4” 0.812 0.835 1.045 1.105 4 35.4 100 27011053
1” 1.000 1.040 1.300 1.380 5 52 100 27011054
1-1/4” 1.250 1.300 1.550 1.630 6 1/4 62 100 27011055
1-1/2” 1.500 1.575 1.850 1.950 - 88 50 27011056
2” 2.000 2.080 2.350 2.450 - 114 50 27011057
Other sizes are available on request, Please consult our sales department.
UL TYPE
Features• Steel construction• Premium hot dip galvanized coating• Superior corrosion resistance• Smooth interior for easy wire pull-thru• Easy installation to follow contours• Extra flexibility for simplified positioning• Superior protection for circuits located in hostile environments• Listed connectors available from leading manufacturers• For fixture whip and modular wiring assemlies, a special version lays straight and flat when cut, to give consistent lengths and easy wire insertion• Complies with UL-1 Standard• Available in units cut to specific lengths - consult factory• Suitable for use in hazardous locations, Class 1, Div 2 for flexible connectors only per 2005 NEC 501.10(B)(2) & 501.30(B)
113
Applications• Electrical raceways where listed products are required• Power and lighting branch circuit conductors and cables for connecting receptacles, luminaires, equipment, office partitions etc.• Motor feeder, branch, control circuit conductors and cables• Remote-control, signaling and power-limited circuit conductors and cables• Fire alarm system conductors and cables of power-limited or non-power-limited fire alarm circuits• Voice, data, communications and video cables including CATV and optical fiber cables• Environmental air-handling spaces• Concealed or exposed installations• Elevators, hoistways and escalators• As a grounding conductor for lengths up to 6 feet (20A max)• Electric Signs and outline lighting• Listed wires fixtures• Raised floors for connection of information technology• Places of assembly and theaters• Cranes and hoists
SEC7.indd 7 5/16/09 4:18:33 PM
FLEXIBLE METALLIC
CON
DU
ITS
7
7-2 FLEXIBLE STEEL CONDUITS
ConduitSize(mm)
OutsideDiameter
(mm)
InsideDiameter
(mm)
Packing1
(m)ITEM NUMBER
16 16 13 50 27110116
20 20.5 16.9 50 27110120
25 25 21.1 50 27110125
32 32 28.1 50 27110132
1 Other packing is available on request.
Other sizes are available on request, Please consult our sales department.
IEC TYPE
Features• Galvanized steel manufactured according to IEC 61386-23
• High mechanical strength
• Highly flexible
• Temperature Range:-100°C to +300°C
• IP rating: IP40 with standard fittings
• Inherent low fire hazard product
114
Applications• Electrical raceways where IEC products are required
• Power and lighting branch circuit conductors and cables for connecting
receptacles, luminaires, equipment, office partitions etc.
• Motor feeder, branch, control circuit conductors and cables
• Remote-control, signaling and power-limited circuit conductors and cables
• Fire alarm system conductors and cables of power-limited or non-power-limited
fire alarm circuits
• Voice, data, communications and video cables including CATV and optical fiber
cables
• Environmental air-handling spaces
• Concealed or exposed installations
• Elevators, hoistways and escalators
• As a grounding conductor for lengths up to 6 feet (20A max)
• Electric Signs and outline lighting
• Underfloor wiring in office blocks
SEC7.indd 8 5/16/09 4:18:53 PM
FLEX
IBLE
MET
ALLI
C CO
ND
UIT
S
7
7-3 PRE-WIRED FLEXIBLE LIQUID TIGHT CONDUITS
ConduitSize (in)
Wires Inside
Conduit
Approx. Weight of 100Ft.(LB)
Approx. Feet Per Standard
Pkg.
ITEM NUMBER
1/2 2X16 AWG 26.74 100 27301010
1/2 2X14 AWG 27.80 100 27301011
1/2 2X12 AWG 29.38 100 27301012
1/2 2X10 AWG 32.29 100 27301013
1/2 3X16 AWG 27.87 100 27301017
1/2 3X14 AWG 29.45 100 27301018
1/2 3X12 AWG 31.83 100 27301019
1/2 3X10 AWG 36.18 100 27301020
1/2 4X16 AWG 28.99 100 27301024
1/2 4X14 AWG 31.1 100 27301025
1/2 4X12 AWG 34.27 100 27301026
1/2 4X10 AWG 40.08 100 27301027
1/2 5X16 AWG 30.11 100 27301031
1/2 5X14 AWG 32.75 100 27301032
1/2 5X12 AWG 36.71 100 27301033
1/2 5X10 AWG 43.97 100 27301034
Other sizes are available on request, Please consult our sales department.
NON - UL TYPE CONDUITS
AMERICAN STANDARD WIRESFeatures
Construction
Color Coding
• Extra felxible for extra easy use• Corrosion resistance steel core for lasting mechanical protection• Durable, abrasion resistance PVC jacket will not wrinkle or shrink from cut ends• Complete protection against most liquids and moisture vapor• Resists sunlight, heat, oil and chemical degradation• Easily cut to length on the job• Accepts standard liquid tight connectors• Delivers long lasting wiring protection where listed products are not required• Generally applicable temperature range: -20°C to +50°C (-5°F to +122°F)• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to NEC code.
THHN/THWN stranded wires available in sizes from 16 AWG to 10 AWG with green grounding wire drawn inside 1/2” NON-UL Type Flexible Liquid Tight Conduits.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
115
Applications• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• All applications of NON - UL Type Liquid Tight Conduits
SEC7.indd 9 5/16/09 4:19:36 PM
FLEXIBLE METALLIC
CON
DU
ITS
7
7-3 PRE-WIRED FLEXIBLE LIQUID TIGHT CONDUITS
ConduitSize (in)
Wires InsideConduit
Approx. Weight of 100Ft.(LB)
Approx. Feet Per Standard
Pkg.
ITEM NUMBER
1/2 2X1.5 mm2 27.4 100 27352010
1/2 2X2.5 mm2 29.12 100 27352011
1/2 2X4 mm2 31.36 100 27352012
1/2 2X6 mm2 33.88 100 27352013
1/2 3X1.5 mm2 28.86 100 27352017
1/2 3X2.5 mm2 31.43 100 27352018
1/2 3X4 mm2 34.8 100 27352019
1/2 3X6 mm2 38.57 100 27352020
1/2 4X1.5 mm2 30.31 100 27352024
1/2 4X2.5 mm2 33.74 100 27352025
1/2 4X4 mm2 38.23 100 27352026
1/2 4X6 mm2 43.26 100 27352027
1/2 5X1.5 mm2 31.76 100 27352031
1/2 5X2.5 mm2 36.05 100 27352032
1/2 5X4 mm2 41.66 100 27352033
3/4 5X6 mm2 53.45 100 27352034
Other sizes are available on request, Please consult our sales department.111
NON - UL TYPE CONDUITS
BRITISH STANDARD WIRES
Construction
Color Coding
H07V-R Stranded wires available in sizes from 1.5mm2
to 6mm2 with green grounding wire drawn inside 1/2” or 3/4” NON-UL Type Flexible Liquid Tight Conduits.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
Features
116
• Extra felxible for extra easy use• Corrosion resistance steel core for lasting mechanical protection• Durable, abrasion resistance PVC jacket will not wrinkle or shrink from cut ends• Complete protection against most liquids and moisture vapor• Resists sunlight, heat, oil and chemical degradation• Easily cut to length on the job• Accepts standard liquid tight connectors• Delivers long lasting wiring protection where listed products are not required• Generally applicable temperature range: -20°C to +50°C (-5°F to +122°F)• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to NEC code.
Applications• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• All applications of NON - UL Type Liquid Tight Conduits
SEC7.indd 10 5/16/09 4:19:50 PM
FLEX
IBLE
MET
ALLI
C CO
ND
UIT
S
7
7-3 PRE-WIRED FLEXIBLE LIQUID TIGHT CONDUITS
ConduitSize (in)
Wire SizeConduit
Approx. Weight of 100Ft.(LB)
Approx. Feet Per Standard
Pkg.
ITEM NUMBER
1/2 2X16 AWG 33.24 100 27311010
1/2 2X14 AWG 34.30 100 27311011
1/2 2X12 AWG 35.88 100 27311012
1/2 2X10 AWG 38.79 100 27311013
1/2 3X16 AWG 34.37 100 27311017
1/2 3X14 AWG 35.95 100 27311018
1/2 3X12 AWG 38.33 100 27311019
1/2 3X10 AWG 42.68 100 27311020
1/2 4X16 AWG 35.49 100 27311024
1/2 4X14 AWG 37.6 100 27311025
1/2 4X12 AWG 40.77 100 27311026
1/2 4X10 AWG 46.58 100 27311027
1/2 5X16 AWG 36.61 100 27311031
1/2 5X14 AWG 39.25 100 27311032
1/2 5X12 AWG 43.21 100 27311033
1/2 5X10 AWG 50.47 100 27311034
Other sizes are available on request, Please consult our sales department.
UL TYPE CONDUITS
AMERICAN STANDARD WIRESFeatures
Applications
Construction
Color Coding
• Galvanized steel core for lasting mechanical protection• Durable, abrasion resistance PVC jacket will not wrinkle or shrink from cut ends• Exceptional crush proof qualities• Complete protection against most liquids and moisture vapor• Resists sunlight, heat, oil and chemical degradation, Rated: -20°C to +50°C (-5°F to +122°F)• Accepts standard UL listed liquid tight connectors• The armor is approved as an equipment ground in sizes 1/2” through 1-1/4”• Superior protection for circuits located in hostile environments• Complies with UL standard 360• Suitable for use in hazardous locations per NEC Articles 500 Classes 1, Div 2; Classes 2 and 3• Copper bond wire in 1/2” - 1 1/4”• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to NEC code.
• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• All applications of UL Listed Type Liquid Tight Conduits
THHN/THWN stranded wires available in sizes from 16 AWG to 10 AWG with green grounding wire drawn inside 1/2” UL Type Flexible Liquid Tight Conduits.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
117
SEC7.indd 11 5/16/09 4:20:03 PM
FLEXIBLE METALLIC
CON
DU
ITS
7
7-3 PRE-WIRED FLEXIBLE LIQUID TIGHT CONDUITS
ConduitSize (in)
Wires InsideConduit
Approx. Weight of 100Ft.(LB)
Approx. Feet Per Standard
Pkg.
ITEM NUMBER
1/2 2X1.5 mm2 33.9 100 27362010
1/2 2X2.5 mm2 35.62 100 27362011
1/2 2X4 mm2 37.864 100 27362012
1/2 2X6 mm2 40.38 100 27362013
1/2 3X1.5 mm2 35.36 100 27362017
1/2 3X2.5 mm2 37.93 100 27362018
1/2 3X4 mm2 41.3 100 27362019
1/2 3X6 mm2 45.07 100 27362020
1/2 4X1.5 mm2 36.81 100 27362024
1/2 4X2.5 mm2 40.24 100 27362025
1/2 4X4 mm2 44.73 100 27362026
1/2 4X6 mm2 45.76 100 27362027
1/2 5X1.5 mm2 38.26 100 27362031
1/2 5X2.5 mm2 42.55 100 27362032
1/2 5X4 mm2 48.16 100 27362033
3/4 5X6 mm2 62.45 100 27362034
Other sizes are available on request, Please consult our sales department.111
UL TYPE CONDUITS
BRITISH STANDARD WIRESFeatures and Applications
Construction
Color Coding
• Galvanized steel core for lasting mechanical protection• Durable, abrasion resistance PVC jacket will not wrinkle or shrink from cut ends• Exceptional crush proof qualities• Complete protection against most liquids and moisture vapor• Resists sunlight, heat, oil and chemical degradation, Rated: -20°C to +50°C (-5°F to +122°F)• Accepts standard UL listed liquid tight connectors• The armor is approved as an equipment ground in sizes 1/2” through 1-1/4”• Superior protection for circuits located in hostile environments• Complies with UL standard 360• Suitable for use in hazardous locations per NEC Articles 500 Classes 1, Div 2; Classes 2 and 3• Copper bond wire in 1/2” - 1 1/4”• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to NEC code.
H07V-R Stranded wires available in sizes from 1.5mm2 to 6mm2 with green grounding wire drawn inside 1/2” or 3/4” UL Type Flexible Liquid Tight Conduit.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
118
Applications• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• All applications of UL Listed Type Liquid Tight Conduits
SEC7.indd 12 5/16/09 4:20:17 PM
FLEX
IBLE
MET
ALLI
C CO
ND
UIT
S
7
7-3 PRE-WIRED FLEXIBLE LIQUID TIGHT CONDUITS
ConduitSize (mm)
WiresInside
Conduits
Packing(m)
ITEM NUMBER
16 2X16 AWG 50 37371010
16 2X14 AWG 50 37371011
16 2X12 AWG 50 37371012
16 3X16 AWG 50 37371013
20 2X10 AWG 50 37371017
20 3X14 AWG 50 37371018
20 3X12 AWG 50 37371019
20 4X16 AWG 50 37371020
20 4X14 AWG 50 37371024
20 5X16 AWG 50 37371025
25 3X10 AWG 50 37371026
25 4X12 AWG 50 37371027
25 4X10 AWG 50 37371031
25 5X14 AWG 50 37371032
25 5X12 AWG 50 37371033
32 5X10 AWG 50 37371034
Other sizes are available on request, Please consult our sales department. 112
IEC TYPE CONDUITS
AMERICAN STANDARD WIRESFeatures
Construction
Color Coding
• Galvanized steel PVC coated and manufactured according to IEC 61386-23• Color grey, other colors available on request• High mechanical strength• Good flexibility• IP rating: IP66 + IP67 + IP68 (5 bar)• Smooth• Wipe clean outer cover• Cover does not wrinkle when bent• Temperature range: -20°C to + 105°C• Resistant to oils and greases• UV resistant (black) and suitable for external use• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to appendix 12 IEE regulations 15th edition.
THHN/THWN stranded wires available in sizes from 16 AWG to 10 AWG with green grounding wire drawn inside 16,20,25 and 32mm IEC Type Flexible Liquid Tight Conduits.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
119
Applications
• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• Machine tools or outdoor installations where liquid tight is a requirement• All applications of IEC Type Liquid Tight Conduits
SEC7.indd 13 5/16/09 4:20:32 PM
FLEXIBLE METALLIC
CON
DU
ITS
7
7-3 PRE-WIRED FLEXIBLE LIQUID TIGHT CONDUITS
ConduitSize (mm)
Wires InsideConduits
Packing(m)
ITEM NUMBER
16 2X1.5 mm2 50 27382010
16 2X2.5 mm2 50 27382011
16 2X4 mm2 50 27382012
16 3X1.5 mm2 50 27382013
20 2X6 mm2 50 27382017
20 3X2.5 mm2 50 27382018
20 3X4 mm2 50 27382019
20 4X1.5 mm2 50 27382020
20 4X2.5 mm2 50 27382024
20 5X1.5 mm2 50 27382025
25 3X6 mm2 50 27382026
25 4X4 mm2 50 27382027
25 4X6 mm2 50 27382031
25 5X2.5 mm2 50 27382032
25 5X4 mm2 50 27382033
32 5X6 mm2 50 27382034
Other sizes are available on request, Please consult our sales department.111
IEC TYPE CONDUITS
BRITISH STANDARD WIRES
Construction
Color Coding
H07V-R Stranded wires available in sizes from 1.5mm2 to 6mm2 with green grounding wire drawn inside 16, 20, 25 and 32mm IEC Type Flexible Liquid Tight Conduits.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
120
Features• Galvanized steel PVC coated and manufactured according to IEC 61386-23• Color grey, other colors available on request• High mechanical strength• Good flexibility• IP rating: IP66 + IP67 + IP68 (5 bar)• Smooth• Wipe clean outer cover• Cover does not wrinkle when bent• Temperature range: -20°C to + 105°C• Resistant to oils and greases• UV resistant (black) and suitable for external use• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to appendix 12 IEE regulations 15th edition.
Applications
• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• Machine tools or outdoor installations where liquid tight is a requirement• All applications of IEC Liquid Tight Conduits
SEC7.indd 14 5/16/09 4:21:06 PM
FLEX
IBLE
MET
ALLI
C CO
ND
UIT
S
7
7-4 PRE-WIRED FLEXIBLE STEEL CONDUITS
ConduitSize (in)
Wires Inside
Conduit
Approx. Weight of 100Ft.(LB)
Approx. Feet Per Standard
Pkg.
ITEM NUMBER
1/2 2X16 AWG 25.94 100 27401010
1/2 2X14 AWG 27.00 100 27401011
1/2 2X12 AWG 28.58 100 27401012
1/2 2X10 AWG 31.49 100 27401013
1/2 3X16 AWG 27.1 100 27401017
1/2 3X14 AWG 28.65 100 27401018
1/2 3X12 AWG 31.03 100 27401019
1/2 3X10 AWG 35.38 100 27401020
1/2 4X16 AWG 28.19 100 27401024
1/2 4X14 AWG 30.03 100 27401025
1/2 4X12 AWG 33.47 100 27401026
1/2 4X10 AWG 39.28 100 27401027
1/2 5X16 AWG 29.31 100 27401031
1/2 5X14 AWG 31.95 100 27401032
1/2 5X12 AWG 35.91 100 27401033
1/2 5X10 AWG 43.17 100 27401034
Other sizes are available on request, Please consult our sales department. 112
NON - UL TYPE CONDUITS
AMERICAN STANDARD WIRESFeatures
Construction
Color Coding
• Steel construction• Hot dip galvanized zinc coating wont flake or peel• Corrosion resistant• Lightweight for easier handling• Easy installlation to follow contours• Built in felxibility for simplified positioning• Crush resistant• Standard connectors available from leading manufacturers• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to NEC code.
THHN/THWN stranded wires available in sizes from 16 AWG to 10 AWG with green grounding wire drawn inside 1/2” lightweight NON-UL Flexible Steel Conduits.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
121
Applications
• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• All applications of NON-UL Flexible Steel Conduits
SEC7.indd 15 5/16/09 4:22:20 PM
FLEXIBLE METALLIC
CON
DU
ITS
7
7-3 PRE-WIRED FLEXIBLE STEEL CONDUITS
ConduitSize (in)
Wires InsideConduit
Approx. Weight of 100Ft.(LB)
Approx. Feet Per Standard
Pkg.
ITEM NUMBER
1/2 2X1.5 mm2 26.6 100 27452010
1/2 2X2.5 mm2 28.32 100 27452011
1/2 2X4 mm2 30.56 100 27452012
1/2 2X6 mm2 33.07 100 27452013
1/2 3X1.5 mm2 28.06 100 27452017
1/2 3X2.5 mm2 30.63 100 27452018
1/2 3X4 mm2 34 100 27452019
1/2 3X6 mm2 37.77 100 27452020
1/2 4X1.5 mm2 29.5 100 27452024
1/2 4X2.5 mm2 32.94 100 27452025
1/2 4X4 mm2 37.43 100 27452026
1/2 4X6 mm2 42.46 100 27452027
1/2 5X1.5 mm2 30.96 100 27452031
1/2 5X2.5 mm2 35.25 100 27452032
1/2 5X4 mm2 40.86 100 27452033
3/4 5X6 mm2 47.15 100 27452034
Other sizes are available on request, Please consult our sales department.111
NON - UL TYPE CONDUITS
BRITISH STANDARD WIRES
Construction
Color Coding
H07V-R Stranded wires available in sizes from 1.5mm2 to 6mm2 with green grounding wire drawn inside 1/2” or 3/4” lightweight NON-UL Flexible Steel Conduit.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
122
Features• Steel construction• Hot dip galvanized zinc coating wont flake or peel• Corrosion resistant• Lightweight for easier handling• Easy installlation to follow contours• Built in felxibility for simplified positioning• Crush resistant• Standard connectors available from leading manufacturers• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to NEC code.
Applications
• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• All applications of NON-UL Flexible Steel Conduits
SEC7.indd 16 5/16/09 4:22:44 PM
FLEX
IBLE
MET
ALLI
C CO
ND
UIT
S
7
7-4 PRE-WIRED FLEXIBLE STEEL CONDUITS
ConduitSize (in)
Wires Inside
Conduit
Approx. Weight of 100Ft.(LB)
Approx. Feet Per Standard
Pkg.
ITEM NUMBER
1/2 2X16 AWG 29.244 100 27411010
1/2 2X14 AWG 30.30 100 27411011
1/2 2X12 AWG 31.88 100 27411012
1/2 2X10 AWG 34.79 100 27411013
1/2 3X16 AWG 30.37 100 27411017
1/2 3X14 AWG 31.95 100 27411018
1/2 3X12 AWG 34.33 100 27411019
1/2 3X10 AWG 38.68 100 27411020
1/2 4X16 AWG 31.49 100 27411024
1/2 4X14 AWG 33.6 100 27411025
1/2 4X12 AWG 36.77 100 27411026
1/2 4X10 AWG 42.58 100 27411027
1/2 5X16 AWG 32.61 100 27411031
1/2 5X14 AWG 35.25 100 27411032
1/2 5X12 AWG 39.21 100 27411033
1/2 5X10 AWG 46.47 100 27411034
Other sizes are available on request, Please consult our sales department. 112
UL TYPE CONDUITS
AMERICAN STANDARD WIRESFeatures
Construction
Color Coding
• Steel construction• Premium hot dip galvanized coating• Superior corrosion resistance• Easy installation to follow contours• Extra flexibility for simplified positioning• Superior protection for circuits located in hostile environments• Listed connectors available from leading manufacturers• For fixture whip and modular wiring assemlies, a special version lays straight and flat when cut, to give consistent lengths and easy wire insertion• Complies with UL-1 Standard• Available in units cut to specific lengths - consult factory• Suitable for use in hazardous locations, Class 1, Div 2 for flexible connectors only per 2005 NEC 501.10(B)(2) & 501.30(B)• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to NEC code.
THHN/THWN stranded wires available in sizes from 16 AWG to 10 AWG with green grounding wire drawn inside 1/2” UL Type Flexible Steel Conduits.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
123
Applications
• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• All applications of UL Flexible Steel Conduits
SEC7.indd 17 5/16/09 4:23:06 PM
FLEXIBLE METALLIC
CON
DU
ITS
7
7-4 PRE-WIRED FLEXIBLE STEEL CONDUITS
ConduitSize (in)
Wires InsideConduit
Approx. Weight of 100Ft.(LB)
Approx. Feet Per Standard
Pkg.
ITEM NUMBER
1/2 2X1.5 mm2 29.9 100 27462010
1/2 2X2.5 mm2 31.62 100 27462011
1/2 2X4 mm2 33.86 100 27462012
1/2 2X6 mm2 36.38 100 27462013
1/2 3X1.5 mm2 31.36 100 27462017
1/2 3X2.5 mm2 33.93 100 27462018
1/2 3X4 mm2 37.3 100 27462019
1/2 3X6 mm2 41.07 100 27462020
1/2 4X1.5 mm2 32.81 100 27462024
1/2 4X2.5 mm2 36.24 100 27462025
1/2 4X4 mm2 40.73 100 27462026
1/2 4X6 mm2 45.76 100 27462027
1/2 5X1.5 mm2 34.26 100 27462031
1/2 5X2.5 mm2 38.55 100 27462032
1/2 5X4 mm2 44.16 100 27462033
3/4 5X6 mm2 58.55 100 27462034
Other sizes are available on request, Please consult our sales department.111
UL TYPE CONDUITS
BRITISH STANDARD WIRES
Construction
Color Coding
H07V-R Stranded wires available in sizes from 1.5mm2 to 6mm2 with green grounding wire drawn inside 1/2” or 3/4” UL Type Flexible Steel Conduit.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
124
Features• Steel construction• Premium hot dip galvanized coating• Superior corrosion resistance• Easy installation to follow contours• Extra flexibility for simplified positioning• Superior protection for circuits located in hostile environments• Listed connectors available from leading manufacturers• For fixture whip and modular wiring assemlies, a special version lays straight and flat when cut, to give consistent lengths and easy wire insertion• Complies with UL-1 Standard• Available in units cut to specific lengths - consult factory• Suitable for use in hazardous locations, Class 1, Div 2 for flexible connectors only per 2005 NEC 501.10(B)(2) & 501.30(B)• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to NEC code.
Applications
• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• All applications of UL Flexible Steel Conduits
SEC7.indd 18 5/16/09 4:23:30 PM
FLEX
IBLE
MET
ALLI
C CO
ND
UIT
S
7
7-3 PRE-WIRED FLEXIBLE STEEL CONDUITS
ConduitSize (mm)
Wires InsideConduit
Packing(m)
ITEM NUMBER
16 2X16 AWG 50 27471010
16 2X14 AWG 50 27471011
16 2X12 AWG 50 27471012
16 3X16 AWG 50 27471013
20 2X10 AWG 50 27471017
20 3X14 AWG 50 27471018
20 3X12 AWG 50 27471019
20 4X16 AWG 50 27471020
20 4X14 AWG 50 27471024
20 5X16 AWG 50 27471025
25 3X10 AWG 50 27471026
25 4X12 AWG 50 27471027
25 4X10 AWG 50 27471031
25 5X14 AWG 50 27471032
25 5X12 AWG 50 27471033
32 5X10 AWG 50 27471034
Other sizes are available on request, Please consult our sales department. 112
IEC TYPE CONDUITS
AMERICAN STANDARD WIRESFeatures
Construction
Color Coding
• Galvanized steel manufactured according to IEC 61386-23• High mechanical strength• Highly flexible• Temperature Range:-100°C to +300°C• IP rating: IP40 with standard fittings• Inherent low fire hazard product• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to appendix 12 IEE regulations 15th edition.
THHN/THWN stranded wires available in sizes from 16 AWG to 10 AWG with green grounding wire drawn inside 16,20,25 and 32mm IEC Type Flexible Steel Conduits.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
125
Applications
• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• All applications of IEC Flexible Steel Conduits
SEC7.indd 19 5/16/09 4:23:51 PM
FLEXIBLE METALLIC
CON
DU
ITS
7
7-3 PRE-WIRED FLEXIBLE STEEL CONDUITS
ConduitSize (mm)
Wires InsideConduit
Packing(m)
ITEM NUMBER
16 2X1.5 mm2 50 27482010
16 2X2.5 mm2 50 27482011
16 2X4 mm2 50 27482012
16 3X1.5 mm2 50 27482013
20 2X6 mm2 50 27482017
20 3X2.5 mm2 50 27482018
20 3X4 mm2 50 27482019
20 4X1.5 mm2 50 27482020
20 4X2.5 mm2 50 27482024
20 5X1.5 mm2 50 27482025
25 3X6 mm2 50 27482026
25 4X4 mm2 50 27482027
25 4X6 mm2 50 27482031
25 5X2.5 mm2 50 27482032
25 5X4 mm2 50 27482033
32 5X6 mm2 50 27482034
Other sizes are available on request, Please consult our sales department.111
IEC TYPE CONDUITS
BRITISH STANDARD WIRES
Construction
Color Coding
H07V-R Stranded wires available in sizes from 1.5mm2 to 6mm2 with green grounding wire drawn inside 16, 20, 25 and 32mm IEC Type Flexible Steel Conduits.
2wire : Red, Green3wire : Red, Black, Green4wire : Red, Yellow, Blue, Green5wire : Red, Yellow, Blue, Black, Green
126
Features• Galvanized steel manufactured according to IEC 61386-23• High mechanical strength• Highly flexible• Temperature Range:-100°C to +300°C• IP rating: IP40 with standard fittings• Inherent low fire hazard product• Reduces installation costs up to 50% over pipe and wire• Size of conduit determined according to appendix 12 IEE regulations 15th edition.
Applications
• Branch, feeder and service power distribution in commercial, industrial, institutional and multi-residential buildings• Power, lighting, control and signal circuits• Concealed or exposed installations• Installation in cable tray and approved raceways• Under raised floors for information technology equipment conductors and cables• All applications of IEC Flexible Steel Conduits
SEC7.indd 20 5/16/09 4:24:15 PM