Download - 6987 001-16-71 Ds 01data Sheet for Scraper
DAHEJ PETROCHEMICAL COMPLEX PROJECT
SCRAPER RECIEVER
PROCESS DATA SHEET
52.5
0.5
52.5
66
1
2
3
4
5
6
7
PIPELINE DETAILS
Outside Diameter, mm (inch) 273.0 (10) Thickness, mmDesign Pressure (Kg/cm2 g) MaterialDesign Temperature(°C) (-)45/ 65 ServiceDesign Code ASME B31.4 Design FactorCorrosion Allowance, mmSCRAPER DETAILSScraper Trap Manufacturer -------Scraper Trap Specification No. 6-71-0031, Rev. 3Type of Scraper Trap Scraper receiver suitable for intelligent piggingDesign Pressure (Kg/cm2 g)ANSI Rating 600#
Corrosion Allowance 3.0 mm
Hydro test Pressure (Kg/cm2 g)
Charpy Impact Test as per clause 3.4 of Spec No. 6-71-0031
Required
Hardness Test as per clause 3.5 of Spec. No. 6-71-0031
Required
Tag No. (s) 01-MR-00-101
PartNo.
Description (Ref. Fig. at Page 2 of 3)
Item Ends, Type Material (Equivalent/ Superior)
Barrel Pipe BW, EW ASTM A333Gr. 6
Neck Pipe Flanged, WNRF, EW ASTM A333Gr. 6& ASTM A 350Gr. LF2 (Flange)
Reducer Concentric BW, Welded ASTM A420 GR. WPL6-W
Bypassconnection
Weldolet + Flange Flanged, WNRF,600#
ASTM A 350 Gr.LF2
Drainconnection
Weldolet + Flange Flanged, WNRF,600#
ASTM A 350 Gr.LF2
Utility connection Weldolet + Flange Flanged, WNRF,600#
ASTM A 350 Gr. LF2
Vent Weldolet + Flange Flanged, WNRF,600#
ASTM A 350 Gr.LF2
8
9 10
11
12
13
Notes: 1. PE: PLAIN WELD, BW: BUTT WELD, WNRF: WELD NECK RAISED FACE, EW ELECTRIC RESISTANCE WELDING,
SW: SEAMLESS
0 ISSUED FOR COMMENTS / ENGG.
Rev. No. Date Purpose Prepared By
Pr. Gauge connection Nippolet PE, Forged ASTM A 350 Gr. LF2
TSVconnection
Nippolet PE, Forged ASTM A 350 Gr.LF2End Closure — Quick Opening, Forged ASTM A 350 Gr. LF2
Pig Signaller As per Pig Signaller Data Sheet No. 6987-000-16-71-DS-06 (Pig Signaller Tag No. 01- XXIS-1202)
Supports Plate Welded ASTM A 36
Filtering Basket ASTM A 36
SCRAPER RECIEVER
PROCESS DATA SHEET
6.4
0.72
52.5
66
ASTM A333Gr. 6 (EW/ SMLS)C2 (Liquid)
Scraper receiver suitable for intelligent pigging
Material (Equivalent/ Superior) OD in mm (inch)/ Thk., in mm or Schedule
ASTM A333Gr. 6 406.4 (16") / 14.3(Note-4)
ASTM A333Gr. 6& ASTM A 350Gr. LF2 (Flange)
273.0 (10") / 6.4 (Note-4)
ASTM A420 GR. WPL6-W 406.4 (16") x 273.0 (10")
ASTM A 350 Gr. 60.3 (2”) / XS
ASTM A 350 Gr. 60.3 (2”) / XS
ASTM A 350 Gr. LF2 60.3 (2”) / XS
ASTM A 350 Gr. 60.3 (2”) / XS
Reviewed By Approved By
ASTM A 350 Gr. LF2 HOLD / XS
ASTM A 350 Gr. 48.3 (11/2”) / XSASTM A 350 Gr. LF2 406.4 (16") / 600#
As per Pig Signaller Data Sheet No. 6987-000-16-71-DS-06 (Pig Signaller Tag No. 01- XXIS-1202)
ASTM A 36 As required
ASTM A 36
AMITPrepared By
Reviewed By
Approved By
DAHEJ PETROCHEMICAL COMPLEX PROJECT
SCRAPER RECIEVER
PROCESS DATA SHEET
2,700 H
700 I356 J
2,700 KL
M
800 NOTES:1. All requirements applicable for C2 ( Liquid) service shall be compliled with as per specification no. 6-7100312. The dimensions indicated above are suggested dimensions only. The vendor/ Manufacturer shall check and provide dimensions suitable for accommodating latest online inspection tool (longest) including intelligent pig. Final dimensions shall be approved by Compny.3. Orientation of all the nozzles is indicative & shall be confirmed by company during Vendor's drawing approval stage.4. Indicated wall thickness for barrel & neck are minimum. Manufacturer shall check the same based on Pipeline design conditions & manufacturing requirements, and submit necessary calculations to Company Calculations to the company for approval.5. Flanges welded on Scraper trap shall have smooth face finish to 125-250 inch AARH6. Scraper trap shall be provided with suitable handling system for retraction of pigs including instrumented pigs ( such as basket / tray; retracting rod? Mechanism etc.) from
DIMENSION DETAILS (NOTE-2)Marking Dimension (mm) Marking
ABCDE Note-12F Note-12G
the trap as per drawing no. 6987-000-16-71-3012 nad clause 4.11 of specification no. 6-71-0031. Price of scraper trap shall be inclusive of pig handling system.However, pig lifting devices (davit etc.) are not in Vendor’s scope of supply.7. All carbon steel fittings and flanges made from ASTM A350 Gr. LF2 material shall be finish forged i.e. forged to the required shape.Machined fittings and flanges are not acceptable. Machining is permitted for weld end preparation and flange face finish preparation.8. Price quoted for Scraper trap shall be inclusive of supply, mounting and testing of pig signaller (without isolation valve type).9. Scraper trap shall be supplied inclusive of mounting and testing of pig signaller (without isolation valve type).10. All Weldolets shall be as per MSS-SP-97 & all Nippolets shall be as per Manufacturer’s Standard.11. Dimensions for all flanges shall be as per ASME B 16.5.12. These dimensions shall be decided by Manufacturer and approved by Company.
0 ISSUED FOR COMMENTS / ENGG. Amit
Rev. No. Date Purpose Prepared By
SCRAPER RECIEVER
PROCESS DATA SHEET
500 500 500 500
2. The dimensions indicated above are suggested dimensions only. The vendor/ Manufacturer shall check and provide dimensions suitable for accommodating latest online
4. Indicated wall thickness for barrel & neck are minimum. Manufacturer shall check the same based on Pipeline design conditions & manufacturing requirements, and submit
6. Scraper trap shall be provided with suitable handling system for retraction of pigs including instrumented pigs ( such as basket / tray; retracting rod? Mechanism etc.) from
Dimension (mm)
Note-10Note-10
the trap as per drawing no. 6987-000-16-71-3012 nad clause 4.11 of specification no. 6-71-0031. Price of scraper trap shall be inclusive of pig handling system.However,
7. All carbon steel fittings and flanges made from ASTM A350 Gr. LF2 material shall be finish forged i.e. forged to the required shape.Machined fittings and flanges are not
Reviewed By Approved By
AMITPrepared By
Reviewed By
Approved By
DAHEJ PETROCHEMICAL COMPLEX PROJECT
SCRAPER RECIEVER
PROCESS DATA SHEET
45
0.5
45
57
1
2
3
4
5
6
7
8
9 10
PIPELINE DETAILS
Outside Diameter, mm (inch) 168.3 (6) Thickness, mmDesign Pressure (Kg/cm2 g) MaterialDesign Temperature(°C) (-)29/ 65 ServiceDesign Code ASME B31.4 Design FactorCorrosion Allowance, mmSCRAPER DETAILSScraper Trap Manufacturer -------Scraper Trap Specification No. 6-71-0031, Rev. 3Type of Scraper Trap Scraper receiver suitable for intelligent piggingDesign Pressure (Kg/cm2 g)ANSI Rating 300 #Corrosion Allowance 3.0 mmHydro test Pressure (Kg/cm2 g)Charpy Impact Test as per clause 3.4 of Spec No. 6- RequiredHardness Test as per clause 3.5 of Spec. No. 6-71- RequiredTag No. (s) 02-MR-00-101 PartNo.
Description (Ref. Fig. at Page 2 of 3) Item Ends, Type
Material (Equivalent/ Superior)
Barrel Pipe BW, EW API 5L Gr. X-56
Neck PipeFlanged, WNRF, EW API 5L Gr. X-56
& ASTM A 105 (Flange)
Reducer Concentric BW, Welded MSS-SP-75 Gr. WPHY-56
Bypassconnection
Weldolet + Flange Flanged, WNRF,600#
ASTM A 105
Drainconnection
Weldolet + Flange Flanged, WNRF,600#
ASTM A 105
Utility connection Weldolet + Flange Flanged, WNRF,600#
ASTM A 105
Vent Weldolet + Flange Flanged, WNRF,600#
ASTM A 105
Pr. Gauge connection Nippolet PE, Forged ASTM A 105
TSVconnection
Nippolet PE, Forged ASTM A 105End Closure — Quick Opening, Forged ASTM A 694 Gr. F-56
11
12
13
Notes: 1. PE: PLAIN WELD, BW: BUTT WELD, WNRF: WELD NECK RAISED FACE, EW ELECTRIC RESISTANCE WELDING,
SW: SEAMLESS
0 ISSUED FOR COMMENTS / ENGG.
Rev. No. Date Purpose Prepared By
Pig Signaller As per Pig Signaller Data Sheet No. 6987-000-16-71-DS-07 (Pig Signaller Tag Nos.02-XXIS-1202 & 03-XXIS-1202)
Supports Plate Welded ASTM A 36
Filtering Basket ASTM A 36
SCRAPER RECIEVER
PROCESS DATA SHEET
6.4
0.72
45
57
API 5L Gr. X-56, PSL 2 (EW/ SMLS)C3 (Liquid)
Scraper receiver suitable for intelligent pigging
Material (Equivalent/ Superior) OD in mm (inch)/ Thk., in mm or Schedule
API 5L Gr. X-56 323.8 (12") / 10.3(Note-4)
API 5L Gr. X-56& ASTM A 105 (Flange)
168.3 (6") / 6.4 (Note-4)
MSS-SP-75 Gr. WPHY-56 323.8 (12") x 168.3 (6")
ASTM A 105 60.3 (2”) / XS
ASTM A 105 60.3 (2”) / XS
ASTM A 105 60.3 (2”) / XS
ASTM A 105 60.3 (2”) / XS
ASTM A 105 HOLD / XS
ASTM A 105 48.3 (11/2”) / XSASTM A 694 Gr. F-56 323.8 (12”) / 300#
Reviewed By Approved By
As per Pig Signaller Data Sheet No. 6987-000-16-71-DS-07 (Pig Signaller Tag Nos.
ASTM A 36 As required
ASTM A 36
AMITPrepared By
Reviewed By
Approved By
DAHEJ PETROCHEMICAL COMPLEX PROJECT
SCRAPER RECIEVER
PROCESS DATA SHEET
2,700 H
700 I203 J
2,700 KL
M
700 NOTES:1. All requirements applicable for C3 ( Liquid) service shall be compliled with as per specification no. 6-710031, Rev. 3.2. The dimensions indicated above are suggested dimensions only. The vendor/ Manufacturer shall check and provide dimensions suitable for accommodating latest online inspection tool (longest) including intelligent pig. Final dimensions shall be approved by Compny.3. Orientation of all the nozzles is indicative & shall be confirmed by company during Vendor's drawing approval stage.4. Indicated wall thickness for barrel & neck are minimum. Manufacturer shall check the same based on Pipeline design conditions & manufacturing requirements, and submit necessary calculations to Company Calculations to the company for approval.5. Flanges welded on Scraper trap shall have smooth face finish to 125-250 inch AARH6. Scraper trap shall be provided with suitable handling system for retraction of pigs including instrumented pigs ( such as basket / tray; retracting rod? Mechanism etc.) from the trap as per drawing no. 6987-000-16-71-3012 nad clause 4.11 of specification no. 6-71-0031. Price of scraper trap shall be inclusive of pig handling system.However,
DIMENSION DETAILS (NOTE-2)Marking Dimension (mm) Marking
ABCDE Note-12F Note-12G
pig lifting devices (davit etc.) are not in Vendor’s scope of supply.7. All carbon steel fittings and flanges made from ASTM A350 Gr. LF2 material shall be finish forged i.e. forged to the required shape.Machined fittings and flanges are not acceptable. Machining is permitted for weld end preparation and flange face finish preparation.8. Price quoted for Scraper trap shall be inclusive of supply, mounting and testing of pig signaller (without isolation valve type).9. Scraper trap shall be supplied inclusive of mounting and testing of pig signaller (without isolation valve type).10. All Weldolets shall be as per MSS-SP-97 & all Nippolets shall be as per Manufacturer’s Standard.11. Dimensions for all flanges shall be as per ASME B 16.5.12. These dimensions shall be decided by Manufacturer and approved by Company.
0 ISSUED FOR COMMENTS / ENGG. Amit
Rev. No. Date Purpose Prepared By
SCRAPER RECIEVER
PROCESS DATA SHEET
500 500 500 500
2. The dimensions indicated above are suggested dimensions only. The vendor/ Manufacturer shall check and provide dimensions suitable for accommodating latest online
4. Indicated wall thickness for barrel & neck are minimum. Manufacturer shall check the same based on Pipeline design conditions & manufacturing requirements, and submit
6. Scraper trap shall be provided with suitable handling system for retraction of pigs including instrumented pigs ( such as basket / tray; retracting rod? Mechanism etc.) from the trap as per drawing no. 6987-000-16-71-3012 nad clause 4.11 of specification no. 6-71-0031. Price of scraper trap shall be inclusive of pig handling system.However,
Dimension (mm)
Note-10Note-10
7. All carbon steel fittings and flanges made from ASTM A350 Gr. LF2 material shall be finish forged i.e. forged to the required shape.Machined fittings and flanges are not
Reviewed By Approved By
AMITPrepared By
Reviewed By
Approved By
DAHEJ PETROCHEMICAL COMPLEX PROJECT
SCRAPER RECIEVER
PROCESS DATA SHEET
45
0.5
45
57
1
2
3
4
5
6
7
8
9 10
PIPELINE DETAILS
Outside Diameter, mm (inch) 168.3 (6) Thickness, mmDesign Pressure (Kg/cm2 g) MaterialDesign Temperature(°C) (-)29/ 65 ServiceDesign Code ASME B31.4 Design FactorCorrosion Allowance, mmSCRAPER DETAILSScraper Trap Manufacturer -------Scraper Trap Specification No. 6-71-0031, Rev. 3Type of Scraper Trap Scraper receiver suitable for intelligent piggingDesign Pressure (Kg/cm2 g)ANSI Rating 300 #Corrosion Allowance 3.0 mmHydro test Pressure (Kg/cm2 g)Charpy Impact Test as per clause 3.4 of Spec No. 6- RequiredHardness Test as per clause 3.5 of Spec. No. 6-71- RequiredTag No. (s) 03-MR-00-101PartNo.
Description (Ref. Fig. at Page 2 of 3) Item Ends, Type
Material (Equivalent/ Superior)
Barrel Pipe BW, EW API 5L Gr. X-56
Neck PipeFlanged, WNRF, EW API 5L Gr. X-56
& ASTM A 105 (Flange)
Reducer Concentric BW, Welded MSS-SP-75 Gr. WPHY-56
Bypassconnection
Weldolet + Flange Flanged, WNRF,600#
ASTM A 105
Drainconnection
Weldolet + Flange Flanged, WNRF,600#
ASTM A 105
Utility connection Weldolet + Flange Flanged, WNRF,600#
ASTM A 105
Vent Weldolet + Flange Flanged, WNRF,600#
ASTM A 105
Pr. Gauge connection Nippolet PE, Forged ASTM A 105
TSVconnection
Nippolet PE, Forged ASTM A 105End Closure — Quick Opening, Forged ASTM A 694 Gr. F-56
11
12
13
Notes: 1. PE: PLAIN WELD, BW: BUTT WELD, WNRF: WELD NECK RAISED FACE, EW ELECTRIC RESISTANCE WELDING,
SW: SEAMLESS
0 ISSUED FOR COMMENTS / ENGG.
Rev. No. Date Purpose Prepared By
Pig Signaller As per Pig Signaller Data Sheet No. 6987-000-16-71-DS-07 (Pig Signaller Tag Nos.02-XXIS-1202 & 03-XXIS-1202)
Supports Plate Welded ASTM A 36
Filtering Basket ASTM A 36
SCRAPER RECIEVER
PROCESS DATA SHEET
6.4
0.72
45
57
API 5L Gr. X-56, PSL 2 (EW/ SMLS) C4 (Liquid)
Scraper receiver suitable for intelligent pigging
Material (Equivalent/ Superior) OD in mm (inch)/ Thk., in mm or Schedule
API 5L Gr. X-56 323.8 (12") / 10.3(Note-4)
API 5L Gr. X-56& ASTM A 105 (Flange)
168.3 (6") / 6.4 (Note-4)
MSS-SP-75 Gr. WPHY-56 323.8 (12") x 168.3 (6")
ASTM A 105 60.3 (2”) / XS
ASTM A 105 60.3 (2”) / XS
ASTM A 105 60.3 (2”) / XS
ASTM A 105 60.3 (2”) / XS
ASTM A 105 HOLD / XS
ASTM A 105 48.3 (11/2”) / XSASTM A 694 Gr. F-56 323.8 (12”) / 300#
Reviewed By Approved By
As per Pig Signaller Data Sheet No. 6987-000-16-71-DS-07 (Pig Signaller Tag Nos.
ASTM A 36 As required
ASTM A 36
AMITPrepared By
Reviewed By
Approved By
DAHEJ PETROCHEMICAL COMPLEX PROJECT
SCRAPER RECIEVER
PROCESS DATA SHEET
2,700 H
700 I203 J
2,700 KL
M
700 NOTES:1. All requirements applicable for C4 ( Liquid) service shall be compliled with as per specification no. 6-710031, Rev. 3.2. The dimensions indicated above are suggested dimensions only. The vendor/ Manufacturer shall check and provide dimensions suitable for accommodating latest online inspection tool (longest) including intelligent pig. Final dimensions shall be approved by Compny.3. Orientation of all the nozzles is indicative & shall be confirmed by company during Vendor's drawing approval stage.4. Indicated wall thickness for barrel & neck are minimum. Manufacturer shall check the same based on Pipeline design conditions & manufacturing requirements, and submit necessary calculations to Company Calculations to the company for approval.5. Flanges welded on Scraper trap shall have smooth face finish to 125-250 inch AARH6. Scraper trap shall be provided with suitable handling system for retraction of pigs including instrumented pigs ( such as basket / tray; retracting rod? Mechanism etc.) from the trap as per drawing no. 6987-000-16-71-3012 nad clause 4.11 of specification no. 6-71-0031. Price of scraper trap shall be inclusive of pig handling system.However, pig lifting devices (davit etc.) are not in Vendor’s scope of supply.7. All carbon steel fittings and flanges made from ASTM A350 Gr. LF2 material shall be finish forged i.e. forged to the required shape.Machined fittings and flanges are not
DIMENSION DETAILS (NOTE-2)Marking Dimension (mm) Marking
ABCDE Note-12F Note-12G
acceptable. Machining is permitted for weld end preparation and flange face finish preparation.8. Price quoted for Scraper trap shall be inclusive of supply, mounting and testing of pig signaller (without isolation valve type).9. Scraper trap shall be supplied inclusive of mounting and testing of pig signaller (without isolation valve type).10. All Weldolets shall be as per MSS-SP-97 & all Nippolets shall be as per Manufacturer’s Standard.11. Dimensions for all flanges shall be as per ASME B 16.5.12. These dimensions shall be decided by Manufacturer and approved by Company.
0 ISSUED FOR COMMENTS / ENGG. Amit
Rev. No. Date Purpose Prepared By
SCRAPER RECIEVER
PROCESS DATA SHEET
500 500 500 500
2. The dimensions indicated above are suggested dimensions only. The vendor/ Manufacturer shall check and provide dimensions suitable for accommodating latest online
4. Indicated wall thickness for barrel & neck are minimum. Manufacturer shall check the same based on Pipeline design conditions & manufacturing requirements, and submit
6. Scraper trap shall be provided with suitable handling system for retraction of pigs including instrumented pigs ( such as basket / tray; retracting rod? Mechanism etc.) from the trap as per drawing no. 6987-000-16-71-3012 nad clause 4.11 of specification no. 6-71-0031. Price of scraper trap shall be inclusive of pig handling system.However,
7. All carbon steel fittings and flanges made from ASTM A350 Gr. LF2 material shall be finish forged i.e. forged to the required shape.Machined fittings and flanges are not
Dimension (mm)
Note-10Note-10
Reviewed By Approved By
AMITPrepared By
Reviewed By
Approved By