April 19, 2023
Unit 8: Transfer of Thermal Energy
Discover PHYSICS
April 19, 2023
8.1 Transfer of Thermal Energy
Learning OutcomesIn this section, you’ll be able to:• Understand that thermal energy is transferred from a
region of higher temperature to a region of lower temperature
April 19, 2023
8.1 Transfer of Thermal Energy
What causes transfer of thermal energy?• Thermal energy is transferred only when there is a
difference in temperature.• Thermal energy always flows from a region of higher
temperature to a region of lower temperature.• There is no transfer of heat at thermal equilibrium.
April 19, 2023
8.1 Transfer of Thermal Energy
How is thermal energy transferred?
• Thermal energy is transferred by:• Conduction• Convection• Radiation
April 19, 2023
8.1 Transfer of Thermal EnergyKey Ideas1. Transfer of thermal energy takes place when there is a
temperature difference. Thermal energy is always transferred from a hotter region to a colder region.
2. When thermal equilibrium is reached between two bodies (i.e. both bodies are at the same temperature), there is no net flow of thermal energy between them.
3. There are three different processes of thermal energy transfer: conduction, convection and radiation.
April 19, 2023
8.1 Transfer of Thermal EnergyTest Yourself1. During winter, it is common for people to say ‘keep the
cold out of the house’. Is this statement correct? Comment.
Answer:The statement ‘keep the cold out of the house’ seems to
suggest that ‘the cold tends to move into the house’ which is not true.
In fact, it is the transfer of heat energy from the inside of the house to the outside that causes the temperature in the house to drop.
April 19, 2023
8.2 Conduction
Learning Outcomes
In this section, you’ll be able to:• Describe how energy transfer occurs in solid.
April 19, 2023
8.2 Conduction
What is conduction?
Definition:
Conduction is the process of thermal energy transfer without any flow of the material medium.
April 19, 2023
8.2 Conduction
Objective:To investigate the transfer of thermal energy through solids
Apparatus:bath, rods of the same dimensions but of different materials, stopwatch
Procedure:1. Coat the parts of the rods that are on the outside of the tank evenly with melted wax (see figure).2. Pour boiling water into the bath, so that the ends of the rods are submerged.3. Record the length of wax that melts in a given interval of time for each of the four rods.
Experiment 8.1
April 19, 2023
Observation:The wax melts the furthest along the copper rod, followed by iron, glass and wood.
April 19, 2023
8.2 Conduction
Experiment 8.1Two important conclusions can be drawn:
1. Thermal energy flows through the material of the rods without any flow of the material itself. This process is called conduction.
2. Different materials conduct heat at different rates. Those that conduct faster are called good conductors (e.g. copper) and those slower are called poor conductors (e.g. wood).
Note:Poor conductors are also known as insulators.
April 19, 2023
8.2 Conduction
How does conduction work?
• Conductors and insulators have different mechanisms to transfer of thermal energy.
• All solids are made up of tiny particles called atoms or molecules.
• Metals contain free electrons which move randomly between the atoms and molecules.
• Non-metals do not have free electrons.
April 19, 2023
8.2 Conduction
How does conduction work?
• When thermal energy is supplied to one end of a rod, the particles (atoms and molecules) at the hot end vibrate vigorously.
• These particles collide with neighbouring particles, making them vibrate as well.
• Kinetic energy of vibrating particles at the hot end is transferred to neighbouring particles.
April 19, 2023
8.2 Conduction
Good Conductor• In metals, another much
faster mechanism of thermal energy transfer takes place at the same time -free electron diffusion.
• The free electrons gain kinetic energy and move faster.
• The fast-moving electrons then diffuse into cooler parts of the metal.
How does conduction work?
April 19, 2023
8.2 Conduction
Insulators• In insulators, the transfer
of thermal energy is solely the results of vibrating atoms and molecules.
• There is no free electrons.
How does conduction work?
April 19, 2023
8.2 Conduction
Conduction in liquids and gases
• Thermal energy can be conducted from a hotter to a cooler region.
• Process of conduction is inefficient.• Liquid particles are further apart and collisions of
particles are less frequent and even lesser in gases.• Thus, transfer of kinetic energy from fast-moving
molecules to neighbouring molecules is slower.• Hence air is poor conductor of heat compared to water,
which is in turn is a poor conductor compared to most solids.
April 19, 2023
Objective:To test conduction of thermal energy in water
Apparatus:test-tube, ice, metal gauze, Bunsen burner,water
Procedure:1. Wrap a piece of ice with metal gauze and place it at the bottom of a test-tube.2. Fill the test-tube with tap water till it is almost full.
8.2 Conduction
Experiment 8.1
April 19, 2023
3. Heat the test-tube at the upper end, as shown in the figure.4. Observe the water being heated and the ice below it.
8.2 Conduction
April 19, 2023
8.2 Conduction
Key Ideas1. Conduction is the transfer of thermal energy without
any flow of the material medium.2. The two mechanisms for conduction are atomic or
molecular vibrations (for both metals and non-metals) and free electron diffusion (for metals only).
3. Liquids and gases are poor conductors of heat compared to solids.
April 19, 2023
Test Yourself1. Give an account of thermal energy conduction in
metals and non-metals.
Answer:In metals, conduction of heat is due mainly to the diffusion
of free electrons from a hotter region to a colder region. Conduction of heat can also take place with molecular vibrations.
In non-metals, conduction of heat only takes place due to molecular vibrations, where the K.E. of the vibrating molecules at the hot end is transferred to the neighbouring molecules.
8.2 Conduction
April 19, 2023
8.2 Conduction
Test Yourself2. Why are good conductors of thermal energy also good
conductor of electricity?
Answer:Good conductors such as metals have free electrons. It is
the presence of free electrons that enable metals to conduct both thermal energy as well as electricity.
Conduction of electric current is the flow of electric charges such as electrons.
April 19, 2023
8.2 Conduction
Test Yourself3. Is the heat transferred from a barbecue fire to a
person standing in front of it a good example of heat transfer by conduction? Explain.
Answer:A person standing in front of a barbecue fire and feeling
hot is not a good example of conduction since air is a poor conductor of heat.
In fact, we will learn later that we feel the hotness of the barbecue fire due to radiation of the heat energy.
April 19, 2023
8.3 Convection
Learning Outcomes
In this section, you’ll be able to:• Describe how energy transfer occurs in fluids.
April 19, 2023
8.3 Convection
What is convection?
Definition:
Convection is the transfer of thermal energy by means of currents in a fluid (liquids or gases).
April 19, 2023
8.3 Convection
Experiment 8.3ObjectiveTo show convection in water
ApparatusLarge, round-bottomed flask,
potassium permanganate crystals, Bunsen burner
Procedure1. Fill the flask with water. Carefully
place some potassium permanganate crystals at the bottom of the flask.
2. Place a Bunsen burner with a small flame under the flask and observe the crystals.
April 19, 2023
Unit 8.3: ConvectionExperiment 8.4
ObjectiveTo show convection in air
Apparatuslarge box with two chimneys on top, a
piece of clear glass on one side, candle, matches
Procedure1. Place the candle below one of the
chimneys. Light the candle.2. Introduce smoke into the other
chimney by placing a piece of smouldering paper over it and observe the movement of the smoke.
April 19, 2023
8.3: ConvectionHow does convection work?
• When fluids (liquids and gases) are heated, they expand and become less dense.
• The less dense fluids tend to rise from the heating source.
• Cooler fluids, being more dense, sink to replace the less dense fluids.
• This movement of fluid due to a difference in its density sets up a convection current.
April 19, 2023
8.3: Convection
How does convection work?
• Convection currents occur only in fluids such as liquids and gases but not in solids.
• Convection involves the bulk movement of the fluids which carry with them thermal energy.
April 19, 2023
8.3: ConvectionKey Ideas
1. Convection is the transfer of thermal energy by means of currents in a fluid (liquid or gas).
2. A convection current is the movement of fluid caused by the change in density in various parts of the fluid.
April 19, 2023
8.3: Convection
Test Yourself1. Why does it feel hot when you put your hands above a
small burning candle?Answer:
The hand feels hot because of convection. The air around the flame is being heated and becomes less dense and rises.
April 19, 2023
8.3: Convection
Test Yourself2. Describe briefly the mechanism for the transfer of
thermal energy in fluids.Answer:• When fluids are heated, they expand and become less
dense. The less dense fluid rises.• The cooler, denser fluids will replace the less dense
fluids.• This sets up a convection current.
April 19, 2023
8.4: Radiation
Learning OutcomesIn this section, you’ll be able to:• Explain energy transfer of a body by radiation.• State the factors affecting the rate of energy transfer
by radiation.
April 19, 2023
8.4: RadiationWhat is radiation?
Definition:
Radiation is the continual emission of infrared waves from the surface of all bodies, transmitted without the aid of a medium.
April 19, 2023
8.4: RadiationWhat is radiation?
• Radiation does not require a medium for energy transfer.
• It can take place in vacuum.
For example, the Sun is a major source of radiant heat.
April 19, 2023
8.4: RadiationWhat is radiation?
• The sun emits electromagnetic waves.• Part of this electromagnetic waves, called infrared
waves, make us feel warm.• Thermal energy from infrared waves is called radiant
heat.• All objects emit some radiant heat.• The hotter the object, the greater the radiant heat
emitted.
April 19, 2023
8.4: RadiationAbsorption of infrared radiation
• Infrared radiation is absorbed by all objects and surfaces.
• The absorption of radiant heat causes a temperature rise.
April 19, 2023
8.4: RadiationEmission of infrared radiation
• Infrared radiation is emitted by all objects and surfaces.• This emission causes the temperature of the objects
themselves to fall.• In general, good emitter of radiant heat is also a good
absorber of radiant heat.• Conversely, poor emitter of radiant heat is also a poor
absorber of radiant heat.
April 19, 2023
Unit 8.4: RadiationExperiment 8.6ObjectiveTo investigate the emission of infrared radiation
ApparatusTwo temperature sensors, data logger, two identical tins (one
black and one shiny), boiling water from two electric kettles
Procedure1. Connect the temperature sensors A and B to the data logger2. Set the sampling rate to ten seconds3. Pour boiling water into both tins at the same time until both
are filled to the brim.
April 19, 2023
4. Place the lid and the temperature sensors onto the tins. Temperature sensor A will monitor the temperature of the black tin, while temperature sensor B records the temperature of the shiny tin.
5. Start recording the temperature. Observe the temperature time graph of both sensors.
6. Stop recording after ten minutes.
Experiment 8.6
April 19, 2023
8.4: RadiationFactors affecting rate of infrared radiation
1. Colour and texture of the surface• Dull, black surfaces are good absorbers of infrared
radiation than shiny, white surfaces
• Dull, black surfaces are better emitters of infrared radiation.
April 19, 2023
Unit 8.4: Radiation
Factors affecting rate of infrared radiation
2. Surface temperature• Rate of infrared radiation also
depends on surface temperature
• The higher the temperature of the surface of the object relative to the surrounding temperature, the higher the rate of infrared radiation.
April 19, 2023
Unit 8.4: RadiationFactors affecting rate of infrared
radiation
3. Surface area• The larger surface area will emit
infrared radiation at a higher rate.
April 19, 2023
Unit 8.4: RadiationKey Ideas
1. Radiation is the continual emission of thermal energy in the form of infrared waves.
2. Radiation is emitted from the surface of all bodies and does not require a medium of thermal transfer.
3. Dull, black surfaces are better emitters of infrared radiation than shiny, white surface.
4. The factors affecting rate of energy transfer by radiation are: colour, and texture of the surface, surface temperature and surface area.
April 19, 2023
Unit 8.4: RadiationTest Yourself1. Give two everyday examples of thermal energy
transfer by radiation.
Answer:a. Feeling the hotness of Sun’s radiation – Sun’s
thermal energy reaches earth by radiation.b. Standing next the a BBQ fire will make you feel
hot. The thermal energy reaches you by radiation.c. Placing your hand next to a hot object such a jar
of hot water. Thermal energy reaches your hand by radiation.
April 19, 2023
Unit 8.4: RadiationTest Yourself2. State briefly how thermal energy is transferred by
radiation.
Answer:Hot objects emit thermal energy in the form of
infrared radiation, which is a type of electromagnetic waves.
The hotter the object, the higher the rate of radiation.
April 19, 2023
Unit 8.4: Radiation
Test Yourself
3. State three factors that affect the rate of transfer of thermal energy by radiation.
Answer:• Colour and texture of the surface.• Surface temperature.• Surface area.
April 19, 2023
Unit 8.5: Applications of Thermal Energy Transfer
Learning Outcomes
In this section, you’ll be able to:• Understand and identify how thermal energy is
transferred by conduction, convection and radiation in everyday life.
April 19, 2023
Unit 8.5: Applications of Thermal Energy Transfer
Common applications of conductionUses of good conductors of heat
1. Cooking utensils – made of metals eg. Stainless steel or aluminium
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of conductionUses of good conductors of heat
2. Soldering iron rods – the tip is made of copper
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of conductionUses of good conductors of heat
3. Heat exchanges.
A heat exchanger transfers thermal energy from hot dirty water to cold clean water. Copper tubes are used to aid rapid transfer of thermal energy from the hot dirty water to the cold clean water.
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of conductionUses of bad conductors of heat (insulators)
1. Handles of appliances and utensils – made of plastics or wood
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of conductionUses of bad conductors of heat (insulators)
2. Table mats – made of cork
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of conductionUses of bad conductors of heat (insulators)
3. Sawdust.• Used to cover ice blocks because of its
insulating property4. Wooden ladles
• Useful for stirring or scooping hot soup.5. Woolen clothes
• Used to keep body warm
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of conductionUses of bad conductors of heat (insulators)
6. Fiberglass, felt and expanded polystyrene foam.
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of convection1. Heating water in Electric kettles – the heating coil
is placed at the bottom to aid the heating of water by convection.
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of convection2. Household hot water system – the heater is located
at the bottom of the system.
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of convection3. Air conditioners.
• Air conditioners are installed near to the ceiling of rooms to facilitate setting up convection currents as cooler air sinks
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of convection4. Refrigerators
• Freezing unit is placed at top to cool the air and facilitate the setting up of convection currents.
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of radiation1. Teapots
• Shiny teapots can keep tea warm for a longer time than black teapots.
• It can also keep cold liquids cool for a longer time than black containers.
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of radiation2. Greenhouses – infrared radiation emitted by the
contents in the greenhouse is trapped in the greenhouse.
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferCommon applications of radiation3. Vacuum flasks• Stopper is made of poor conductor.
• The vacuum between the double-glass wall minimises conduction and convection.
• The glass walls are silvered and highly reflective to minimise heat loss due to radiation.
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferWorked Example 8.2The figure shows a typical vacuum flask designed to keep liquids hot. Part of the vacuum flask is enlarged. State and explain the function of each of the parts labelled A to C
SolutionA: Thin silvering wall to minimise thermal energy loss by radiationSince shiny surfaces are poor absorbers of radiant heat.B: Vacuum to prevent thermal energy loss by conduction and convention (both require material medium for energy transfer)C: Hollow plastic stopper. Plastic is a poor conductor of heat, minimising thermal energy loss by conduction.
April 19, 2023
Unit 8.5: Applications of Thermal Energy TransferKey Ideas1. Some everyday applications of thermal energy
transfer involving conduction include cooking utensils and table mats.
2. Some everyday applications of thermal energy transfer involving convection include household hot water systems and electric kettles.
3. Some everyday applications of thermal energy transfer involving radiation include vacuum flasks and greenhouses.
April 19, 2023
Unit 8.5: Applications of Thermal Energy Transfer
Test Yourself
1. A saucepan with a thick copper base contains water and is placed on a flat electric hot plate.a. State the process by which energy is
i. transferred from the hot plate to the water,ii. spread through the water.
b. The sides of a saucepan are often polished. How does this reduce energy loss?
Answer:a(i) Conduction.(ii) Convection.b. The sides are polished to reduce heat loss due to
radiation. Polished and shiny surfaces are poor emitters of radiation
April 19, 2023
Unit 8: Transfer of Thermal Energy