211 Motor Carrier Bill of Lading
X12/V4010/211: 211 Motor Carrier Bill of Lading
Version: 1.0 Final
Publication: 1/27/2009 Notes:
Motor Carrier Bill of Lading - 211
i For internal use only
Table of Contents
211 Motor Carrier Bill of Lading ..............................................................................................1 ISA Interchange Control Header ..........................................................................................3 GS Functional Group Header .............................................................................................5 ST Transaction Set Header................................................................................................7 BOL Beginning Segment for the Motor Carrier Bill of Lading ........................................................8 B2A Set Purpose ..............................................................................................................9 L11 Business Instructions and Reference Number.................................................................. 10 G62 Date/Time ............................................................................................................... 11 N1 Name .................................................................................................................... 12 N3 Address Information ................................................................................................. 13 N4 Geographic Location ................................................................................................. 14 AT1 Bill of Lading Line Item Number ................................................................................... 15 AT4 Bill of Lading Description ........................................................................................... 16 AT2 Bill of Lading Line Item Detail ...................................................................................... 17 G61 Contact.................................................................................................................. 19 LH1 Hazardous Identification Information ............................................................................. 20 LH2 Hazardous Classification Information ............................................................................ 21 LH3 Hazardous Material Shipping Name ............................................................................... 22 SE Transaction Set Trailer............................................................................................... 23 GE Functional Group Trailer ............................................................................................ 24 IEA Interchange Control Trailer ......................................................................................... 25
Motor Carrier Bill of Lading - 211
1 For internal use only
211 Motor Carrier Bill of Lading Functional Group=BL
Purpose: This Draft Standard for Trial Use contains the format and establishes the data contents of the Motor Carrier Bill of Lading Transaction Set (211) for use within the context of an Electronic Data Interchange (EDI) environment. This transaction set can be used to allow shippers or other parties, responsible for contracting with a motor carrier, to provide a legal bill of lading for a shipment. It is not to be used to provide a motor carrier with data relative to a load tender, pick-up manifest, or appointment scheduling.
Not Defined: Pos Id Segment Name Req Max Use Repeat Notes Usage ISA Interchange Control Header M 1 Must use GS Functional Group Header M 1 Must use
Heading: Pos Id Segment Name Req Max Use Repeat Notes Usage 010 ST Transaction Set Header M 1 Must use 020 BOL Beginning Segment for the
Motor Carrier Bill of Lading M 1 Must use
030 B2A Set Purpose M 1 Must use 060 L11 Business Instructions and
Reference Number O 100 Must use
070 G62 Date/Time O 6 Must use LOOP ID - 0100 10 N1/100L 100 N1 Name O 1 N1/100 Must use 120 N3 Address Information O 2 Must use 130 N4 Geographic Location O 1 Must use
Detail: Pos Id Segment Name Req Max Use Repeat Notes Usage
LOOP ID - 0200 9999 N2/010L 010 AT1 Bill of Lading Line Item
Number M 1 N2/010 Must use
040 AT4 Bill of Lading Description O 99 N2/040 Must use LOOP ID - 0210 1 N2/050L 050 AT2 Bill of Lading Line Item
Detail O 1 N2/050 Must use
LOOP ID - 0230 2 N2/110L 110 G61 Contact O 1 N2/110 Must use
LOOP ID - 0231 25 140 LH1 Hazardous Identification
Information M 1 Must use
150 LH2 Hazardous Classification Information
O 4 Must use
160 LH3 Hazardous Material Shipping Name
O 10 Must use
220 SE Transaction Set Trailer M 1 Must use
Not Defined: Pos Id Segment Name Req Max Use Repeat Notes Usage GE Functional Group Trailer M 1 Must use IEA Interchange Control Trailer M 1 Must use
Motor Carrier Bill of Lading - 211
2 For internal use only
Notes: 1/100L Loop 0100 is used to specify the parties to the Bill of Lading, including but not limited to, the ship-from,
ship-to, or bill-to parties. 1/100 Loop 0100 is used to specify the parties to the Bill of Lading, including but not limited to, the ship-from,
ship-to, or bill-to parties. 2/010L The AT1 segment provides the line number for all of the related items included. It may include reference
numbers, rates and charges, descriptions, and or line item details. Any data included within a single loop is related to the other data included in that loop. Any reference numbers included in a loop with line item details are related to that line item only. Any reference numbers included in its own line item are related to the entire shipment and can not be broken out by line item detail.
2/010 The AT1 segment provides the line number for all of the related items included. It may include reference numbers, rates and charges, descriptions, and or line item details. Any data included within a single loop is related to the other data included in that loop. Any reference numbers included in a loop with line item details are related to that line item only. Any reference numbers included in its own line item are related to the entire shipment and can not be broken out by line item detail.
2/040 Segment AT4 provides a means for the shipper to provide a text description of the line item. The National Motor Freight Classification and the freight class shall be included in the AT2 segment if applicable.
2/050L The AT2 segment is used to provide the carrier with the appropriate data to rate the shipment. It is included per line item when the line item includes an item of freight.
2/050 The AT2 segment is used to provide the carrier with the appropriate data to rate the shipment. It is included per line item when the line item includes an item of freight.
2/110L The G61 segment shall only be used to provide the name and phone number of the contact for any hazardous materials included on this Bill of Lading.
2/110 The G61 segment shall only be used to provide the name and phone number of the contact for any hazardous materials included on this Bill of Lading.
Motor Carrier Bill of Lading - 211
3 For internal use only
ISA Interchange Control Header Pos: Max: 1Not Defined - Mandatory
Loop: N/A Elements: 16 User Option (Usage): Must use Purpose: To start and identify an interchange of zero or more functional groups and interchange-related control segments
Element Summary: Ref Id Element Name Req Type Min/Max Usage ISA01 I01 Authorization Information Qualifier M ID 2/2 Must use
Description: Code to identify the type of information in the Authorization Information
CodeList Summary (Total Codes: 7, Included: 1) Code Name 00 No Authorization Information Present (No Meaningful Information in I02)
ISA02 I02 Authorization Information M AN 10/10 Must use
Description: Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
ISA03 I03 Security Information Qualifier M ID 2/2 Must use
Description: Code to identify the type of information in the Security Information
CodeList Summary (Total Codes: 2, Included: 1) Code Name 00 No Security Information Present (No Meaningful Information in I04)
ISA04 I04 Security Information M AN 10/10 Must use
Description: This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
ISA05 I05 Interchange ID Qualifier M ID 2/2 Must use
Description: Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
All valid standard codes are used. (Total Codes: 38)
ISA06 I06 Interchange Sender ID M AN 15/15 Must use
Description: Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
ISA07 I05 Interchange ID Qualifier M ID 2/2 Must use
Description: Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
All valid standard codes are used. (Total Codes: 38)
ISA08 I07 Interchange Receiver ID M AN 15/15 Must use
Description: Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
ISA09 I08 Interchange Date M DT 6/6 Must use
Description: Date of the interchange
ISA10 I09 Interchange Time M TM 4/4 Must use
Motor Carrier Bill of Lading - 211
4 For internal use only
Description: Time of the interchange
ISA11 I10 Interchange Control Standards Identifier M ID 1/1 Must use
Description: Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer All valid standard codes are used. (Total Codes: 1)
ISA12 I11 Interchange Control Version Number M ID 5/5 Must use
Description: Code specifying the version number of the interchange control segments
CodeList Summary (Total Codes: 14, Included: 1) Code Name 00400 Standard Issued as ANSI X12.5-1997
ISA13 I12 Interchange Control Number M N0 9/9 Must use
Description: A control number assigned by the interchange sender
ISA14 I13 Acknowledgment Requested M ID 1/1 Must use
Description: Code sent by the sender to request an interchange acknowledgment (TA1)
CodeList Summary (Total Codes: 2, Included: 1) Code Name 0 No Acknowledgment Requested
ISA15 I14 Usage Indicator M ID 1/1 Must use
Description: Code to indicate whether data enclosed by this interchange envelope is test, production or information
CodeList Summary (Total Codes: 3, Included: 2) Code Name P Production Data T Test Data
ISA16 I15 Component Element Separator M 1/1 Must use
Description: Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
Motor Carrier Bill of Lading - 211
5 For internal use only
GS Functional Group Header Pos: Max: 1Not Defined - Mandatory
Loop: N/A Elements: 8 User Option (Usage): Must use Purpose: To indicate the beginning of a functional group and to provide control information
Element Summary: Ref Id Element Name Req Type Min/Max Usage GS01 479 Functional Identifier Code M ID 2/2 Must use
Description: Code identifying a group of application related transaction sets
CodeList Summary (Total Codes: 240, Included: 1) Code Name BL Motor Carrier Bill of Lading (211)
GS02 142 Application Sender's Code M AN 2/15 Must use
Description: Code identifying party sending transmission; codes agreed to by trading partners
GS03 124 Application Receiver's Code M AN 2/15 Must use
Description: Code identifying party receiving transmission; codes agreed to by trading partners
GS04 373 Date M DT 8/8 Must use
Description: Date expressed as CCYYMMDD
GS05 337 Time M TM 4/8 Must use
Description: Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
GS06 28 Group Control Number M N0 1/9 Must use
Description: Assigned number originated and maintained by the sender
GS07 455 Responsible Agency Code M ID 1/2 Must use
Description: Code identifying the issuer of the standard; this code is used in conjunction with Data Element 480
CodeList Summary (Total Codes: 2, Included: 1) Code Name X Accredited Standards Committee X12
GS08 480 Version / Release / Industry Identifier Code
M AN 1/12 Must use
Description: Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
CodeList Summary (Total Codes: 39, Included: 1) Code Name 004010 Draft Standards Approved for Publication by ASC X12 Procedures Review
Board through October 1997
Semantics:
Motor Carrier Bill of Lading - 211
6 For internal use only
1. GS04 is the group date. 2. GS05 is the group time. 3. The data interchange control number GS06 in this header must be identical to the same data element in the
associated functional group trailer, GE02.
Comments: 1. A functional group of related transaction sets, within the scope of X12 standards, consists of a collection of
similar transaction sets enclosed by a functional group header and a functional group trailer.
Motor Carrier Bill of Lading - 211
7 For internal use only
ST Transaction Set Header Pos: 010 Max: 1Heading - Mandatory
Loop: N/A Elements: 2 User Option (Usage): Must use Purpose: To indicate the start of a transaction set and to assign a control number
Element Summary: Ref Id Element Name Req Type Min/Max Usage ST01 143 Transaction Set Identifier Code M ID 3/3 Must use
Description: Code uniquely identifying a Transaction Set
CodeList Summary (Total Codes: 298, Included: 1) Code Name 211 Motor Carrier Bill of Lading
ST02 329 Transaction Set Control Number M AN 4/9 Must use
Description: Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Semantics: 1. The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the
appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
Motor Carrier Bill of Lading - 211
8 For internal use only
BOL Beginning Segment for the Motor Carrier Bill of Lading
Pos: 020 Max: 1Heading - Mandatory
Loop: N/A Elements: 6 User Option (Usage): Must use Purpose: To transmit identifying numbers, dates, and other basic data related to the transaction set
Element Summary: Ref Id Element Name Req Type Min/Max Usage BOL01 140 Standard Carrier Alpha Code M ID 2/4 Must use
Description: Standard Carrier Alpha Code
BOL02 146 Shipment Method of Payment M ID 2/2 Must use
Description: Code identifying payment terms for transportation charges
All valid standard codes are used. (Total Codes: 28)
BOL03 145 Shipment Identification Number M AN 1/30 Must use
Description: Identification number assigned to the shipment by the shipper that uniquely identifies the shipment from origin to ultimate destination and is not subject to modification; (Does not contain blanks or special characters)
BOL04 373 Date M DT 8/8 Must use
Description: Date expressed as CCYYMMDD
BOL05 337 Time O TM 4/8 Must use
Description: Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
BOL06 127 Reference Identification O AN 1/30 Must use
Description: Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
Semantics: 1. BOL01 is the Standard Carrier Alpha Code (SCAC) of the carrier that is to provide transportation services. 2. BOL02 is the method of payment for the freight charges. 3. BOL03 is the identification number assigned by the shipper, usually the Bill of Lading number. 4. BOL04 is the date the carrier picked up the freight. 5. BOL05 is the actual time the carrier picked up the freight. 6. BOL06 is the number assigned by the carrier to the shipment, usually the PRO number. 7. BOL10 is the method of payment for the COD fee. 8. BOL11 is the currency that all monetary units are specified in for this transaction set.
Motor Carrier Bill of Lading - 211
9 For internal use only
B2A Set Purpose Pos: 030 Max: 1Heading - Mandatory
Loop: N/A Elements: 2 User Option (Usage): Must use Purpose: To allow for positive identification of transaction set purpose
Element Summary: Ref Id Element Name Req Type Min/Max Usage B2A01 353 Transaction Set Purpose Code M ID 2/2 Must use
Description: Code identifying purpose of transaction set
CodeList Summary (Total Codes: 65, Included: 1) Code Name 00 Original
B2A02 346 Application Type O ID 2/2 Must use
Description: Code identifying an application
CodeList Summary (Total Codes: 84, Included: 1) Code Name BL Bill of Lading
Motor Carrier Bill of Lading - 211
10 For internal use only
L11 Business Instructions and Reference Number
Pos: 060 Max: 100Heading - Optional
Loop: N/A Elements: 2 User Option (Usage): Must use Purpose: To specify instructions in this business relationship or a reference number
Element Summary: Ref Id Element Name Req Type Min/Max Usage L1101 127 Reference Identification X AN 1/30 Must use
Description: Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
L1102 128 Reference Identification Qualifier X ID 2/3 Must use
Description: Code qualifying the Reference Identification
CodeList Summary (Total Codes: 1503, Included: 1) Code Name PO Purchase Order Number Syntax Rules:
1. R0103 - At least one of L1101 or L1103 is required. 2. P0102 - If either L1101 or L1102 is present, then the other is required.
Motor Carrier Bill of Lading - 211
11 For internal use only
G62 Date/Time Pos: 070 Max: 6Heading - Optional
Loop: N/A Elements: 2 User Option (Usage): Must use Purpose: To specify pertinent dates and times
Element Summary: Ref Id Element Name Req Type Min/Max Usage G6201 432 Date Qualifier X ID 2/2 Must use
Description: Code specifying type of date
CodeList Summary (Total Codes: 137, Included: 1) Code Name 10 Requested Ship Date/Pick-up Date
G6202 373 Date X DT 8/8 Must use
Description: Date expressed as CCYYMMDD
Syntax Rules: 1. R0103 - At least one of G6201 or G6203 is required. 2. P0102 - If either G6201 or G6202 is present, then the other is required. 3. P0304 - If either G6203 or G6204 is present, then the other is required.
Motor Carrier Bill of Lading - 211
12 For internal use only
N1 Name Pos: 100 Max: 1Heading - Optional
Loop: 0100 Elements: 2 User Option (Usage): Must use Purpose: To identify a party by type of organization, name, and code
Element Summary: Ref Id Element Name Req Type Min/Max Usage N101 98 Entity Identifier Code M ID 2/3 Must use
Description: Code identifying an organizational entity, a physical location, property or an individual
CodeList Summary (Total Codes: 1312, Included: 2) Code Name CN Consignee SH Shipper
N102 93 Name X AN 1/60 Must use
Description: Free-form name
Syntax Rules: 1. R0203 - At least one of N102 or N103 is required. 2. P0304 - If either N103 or N104 is present, then the other is required.
Comments: 1. This segment, used alone, provides the most efficient method of providing organizational identification. To
obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
2. N105 and N106 further define the type of entity in N101.
Two separate loops for Shipper and Consignee are required.
Motor Carrier Bill of Lading - 211
13 For internal use only
N3 Address Information Pos: 120 Max: 2Heading - Optional
Loop: 0100 Elements: 2 User Option (Usage): Must use Purpose: To specify the location of the named party
Element Summary: Ref Id Element Name Req Type Min/Max Usage N301 166 Address Information M AN 1/55 Must use
Description: Address information
N302 166 Address Information O AN 1/55 Used
Description: Address information
Motor Carrier Bill of Lading - 211
14 For internal use only
N4 Geographic Location Pos: 130 Max: 1Heading - Optional
Loop: 0100 Elements: 4 User Option (Usage): Must use Purpose: To specify the geographic place of the named party
Element Summary: Ref Id Element Name Req Type Min/Max Usage N401 19 City Name O AN 2/30 Must use
Description: Free-form text for city name
N402 156 State or Province Code O ID 2/2 Must use
Description: Code (Standard State/Province) as defined by appropriate government agency
N403 116 Postal Code O ID 3/15 Must use
Description: Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
N404 26 Country Code O ID 2/3 Must use
Description: Code identifying the country
Syntax Rules: 1. C0605 - If N406 is present, then N405 is required.
Comments: 1. A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location. 2. N402 is required only if city name (N401) is in the U.S. or Canada.
Motor Carrier Bill of Lading - 211
15 For internal use only
AT1 Bill of Lading Line Item Number
Pos: 010 Max: 1Detail - Mandatory
Loop: 0200 Elements: 1 User Option (Usage): Must use Purpose: To reference a Bill of Lading line number
Element Summary: Ref Id Element Name Req Type Min/Max Usage AT101 213 Lading Line Item Number M N0 1/3 Must use
Description: Sequential line number for a lading item
Motor Carrier Bill of Lading - 211
16 For internal use only
AT4 Bill of Lading Description Pos: 040 Max: 99Detail - Optional
Loop: 0200 Elements: 1 User Option (Usage): Must use Purpose: To specify the lading description
Element Summary: Ref Id Element Name Req Type Min/Max Usage AT401 79 Lading Description M AN 1/50 Must use
Description: Description of an item as required for rating and billing purposes
Motor Carrier Bill of Lading - 211
17 For internal use only
AT2 Bill of Lading Line Item Detail
Pos: 050 Max: 1Detail - Optional
Loop: 0210 Elements: 7 User Option (Usage): Must use Purpose: To specify Bill of Lading quantity, weight, and commodity classification
Element Summary: Ref Id Element Name Req Type Min/Max Usage AT201 80 Lading Quantity M N0 1/7 Must use
Description: Number of units (pieces) of the lading commodity
AT202 211 Packaging Form Code M ID 3/3 Must use
Description: Code for packaging form of the lading quantity
CodeList Summary (Total Codes: 134, Included: 1) Code Name PCS Pieces
AT203 187 Weight Qualifier M ID 1/2 Must use
Description: Code defining the type of weight
CodeList Summary (Total Codes: 51, Included: 1) Code Name G Gross Weight
AT204 188 Weight Unit Code M ID 1/1 Must use
Description: Code specifying the weight unit
CodeList Summary (Total Codes: 8, Included: 1) Code Name L Pounds
AT205 81 Weight M R 1/10 Must use
Description: Numeric value of weight
AT209 22 Commodity Code O AN 1/30 Must use
Description: Code describing a commodity or group of commodities
AT210 59 Freight Class Code O AN 2/5 Must use
Description: Code indicating generalized classification that applies to one or more items in the shipment, i.e., class 70, 77.5, etc.
Syntax Rules: 1. P0607 - If either AT206 or AT207 is present, then the other is required.
Semantics: 1. AT201 is the number of carrier handling units for the line item. 2. AT202 is the packaging form of the lading quantity in AT201. 3. AT203 and AT204 qualify AT205. 4. AT205 is the weight of the lading quantity identified in AT201. 5. AT206 is used only if AT202 contains the codes PLT, SKD, or SLP. 6. AT206 is the total number of pieces contained on the pallets, skids or slip sheets identified in AT201. 7. AT207 is the packaging form of the units on the pallet, skid, or slip sheet identified in AT202. 8. AT208 indicates if the carrier is required to verify the number of cartons on the pallet, slip sheet, or skid. A "Y"
indicates that the carrier is required to verify the number of cartons. An "N" indicates that the carrier is not
Motor Carrier Bill of Lading - 211
18 For internal use only
required to verify the number of cartons. If AT208 is not present in the segment a code of "N" is assumed. 9. AT209 is the National Motor Freight Classification Number.
Motor Carrier Bill of Lading - 211
19 For internal use only
G61 Contact Pos: 110 Max: 1Detail - Optional
Loop: 0230 Elements: 4 User Option (Usage): Must use Purpose: To identify a person or office to whom communications should be directed
Element Summary: Ref Id Element Name Req Type Min/Max Usage G6101 366 Contact Function Code M ID 2/2 Must use
Description: Code identifying the major duty or responsibility of the person or group named
CodeList Summary (Total Codes: 230, Included: 1) Code Name HM Hazardous Material Contact
G6102 93 Name M AN 1/60 Must use
Description: Free-form name
G6103 365 Communication Number Qualifier X ID 2/2 Must use
Description: Code identifying the type of communication number
CodeList Summary (Total Codes: 40, Included: 1) Code Name TE Telephone
G6104 364 Communication Number X AN 1/80 Must use
Description: Complete communications number including country or area code when applicable
Syntax Rules: 1. P0304 - If either G6103 or G6104 is present, then the other is required.
Comments: 1. G6103 qualifies G6104.
Motor Carrier Bill of Lading - 211
20 For internal use only
LH1 Hazardous Identification Information
Pos: 140 Max: 1Detail - Mandatory
Loop: 0231 Elements: 2 User Option (Usage): Must use Purpose: To specify the hazardous commodity identification reference number and quantity
Element Summary: Ref Id Element Name Req Type Min/Max Usage LH101 355 Unit or Basis for Measurement Code M ID 2/2 Must use
Description: Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
CodeList Summary (Total Codes: 794, Included: 1) Code Name 01 Actual Pounds
LH102 80 Lading Quantity M N0 1/7 Must use
Description: Number of units (pieces) of the lading commodity
Comments: 1. LH101 and LH102 are used to convey the number and type of packages for bulk and nonbulk movements. 2. LH106 and LH107 are used to convey the quantity or volume and unit of measure for nonbulk shipments only. 3. In LH109, a value of "R" or "P" requires that the receiver generate the words "residue: last contained" prior to
the shipping name in accordance with regulations.
Motor Carrier Bill of Lading - 211
21 For internal use only
LH2 Hazardous Classification Information
Pos: 150 Max: 4Detail - Optional
Loop: 0231 Elements: 1 User Option (Usage): Must use Purpose: To specify the hazardous notation and endorsement information
Element Summary: Ref Id Element Name Req Type Min/Max Usage LH201 215 Hazardous Classification O ID 1/30 Must use
Description: The hazardous classification corresponding to the shipping name of the hazardous commodity
Syntax Rules: 1. P0607 - If either LH206 or LH207 is present, then the other is required. 2. P0809 - If either LH208 or LH209 is present, then the other is required. 3. P1011 - If either LH210 or LH211 is present, then the other is required.
Semantics: 1. LH206 and LH207 indicate the flashpoint temperature. 2. LH208 and LH209 indicate the control temperature. 3. LH210 and LH211 indicate the emergency temperature.
Motor Carrier Bill of Lading - 211
22 For internal use only
LH3 Hazardous Material Shipping Name
Pos: 160 Max: 10Detail - Optional
Loop: 0231 Elements: 2 User Option (Usage): Must use Purpose: To specify the hazardous material shipping name and additional descriptive requirements
Element Summary: Ref Id Element Name Req Type Min/Max Usage LH301 224 Hazardous Material Shipping Name X AN 1/25 Must use
Description: The proper shipping name of the hazardous commodity as specified by the Code of Federal Regulations, Title 49
LH302 984 Hazardous Material Shipping Name Qualifier
X ID 1/1 Must use
Description: Qualifier indicating the source (regulatory) of the proper shipping name
CodeList Summary (Total Codes: 3, Included: 1) Code Name D Domestic (United States) Shipping Name Syntax Rules:
1. P0102 - If either LH301 or LH302 is present, then the other is required.
Semantics: 1. If LH304 is "Y", then this is an Association of American Railroads Operations and Transportation Bulletin 55
commodity. If "N", it is not an Association of American Railroads Operations and Transportation Bulletin 55 commodity.
Motor Carrier Bill of Lading - 211
23 For internal use only
SE Transaction Set Trailer Pos: 220 Max: 1Detail - Mandatory
Loop: N/A Elements: 2 User Option (Usage): Must use Purpose: To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Element Summary: Ref Id Element Name Req Type Min/Max Usage SE01 96 Number of Included Segments M N0 1/10 Must use
Description: Total number of segments included in a transaction set including ST and SE segments
SE02 329 Transaction Set Control Number M AN 4/9 Must use
Description: Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
Comments: 1. SE is the last segment of each transaction set.
Motor Carrier Bill of Lading - 211
24 For internal use only
GE Functional Group Trailer Pos: Max: 1Not Defined - Mandatory
Loop: N/A Elements: 2 User Option (Usage): Must use Purpose: To indicate the end of a functional group and to provide control information
Element Summary: Ref Id Element Name Req Type Min/Max Usage GE01 97 Number of Transaction Sets Included M N0 1/6 Must use
Description: Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
GE02 28 Group Control Number M N0 1/9 Must use
Description: Assigned number originated and maintained by the sender
Semantics: 1. The data interchange control number GE02 in this trailer must be identical to the same data element in the
associated functional group header, GS06.
Comments: 1. The use of identical data interchange control numbers in the associated functional group header and trailer is
designed to maximize functional group integrity. The control number is the same as that used in the corresponding header.
Motor Carrier Bill of Lading - 211
25 For internal use only
IEA Interchange Control Trailer Pos: Max: 1Not Defined - Mandatory
Loop: N/A Elements: 2 User Option (Usage): Must use Purpose: To define the end of an interchange of zero or more functional groups and interchange-related control segments
Element Summary: Ref Id Element Name Req Type Min/Max Usage IEA01 I16 Number of Included Functional Groups M N0 1/5 Must use
Description: A count of the number of functional groups included in an interchange
IEA02 I12 Interchange Control Number M N0 9/9 Must use
Description: A control number assigned by the interchange sender