Download - 1D Beam
-
8/10/2019 1D Beam
1/55
1D beam 11/25/2008
Nemetschek Scia 1 of 55
-
8/10/2019 1D Beam
2/55
1D beam 11/25/2008
Nemetschek Scia 2 of 55
-
8/10/2019 1D Beam
3/55
1D beam 11/25/2008
Nemetschek Scia 3 of 55
-
8/10/2019 1D Beam
4/55
1D beam 11/25/2008
Nemetschek Scia 4 of 55
-
8/10/2019 1D Beam
5/55
1D beam 11/25/2008
Nemetschek Scia 5 of 55
-
8/10/2019 1D Beam
6/55
1D beam 11/25/2008
Nemetschek Scia 6 of 55
-
8/10/2019 1D Beam
7/55
1D beam 11/25/2008
Nemetschek Scia 7 of 55
-
8/10/2019 1D Beam
8/55
1D beam 11/25/2008
Nemetschek Scia 8 of 55
-
8/10/2019 1D Beam
9/55
1D beam 11/25/2008
Nemetschek Scia 9 of 55
-
8/10/2019 1D Beam
10/55
1D beam 11/25/2008
Nemetschek Scia 10 of 55
-
8/10/2019 1D Beam
11/55
1D beam 11/25/2008
Nemetschek Scia 11 of 55
-
8/10/2019 1D Beam
12/55
1D beam 11/25/2008
Nemetschek Scia 12 of 55
-
8/10/2019 1D Beam
13/55
1D beam 11/25/2008
Nemetschek Scia 13 of 55
-
8/10/2019 1D Beam
14/55
1D beam 11/25/2008
Nemetschek Scia 14 of 55
-
8/10/2019 1D Beam
15/55
1D beam 11/25/2008
Nemetschek Scia 15 of 55
-
8/10/2019 1D Beam
16/55
1D beam 11/25/2008
Nemetschek Scia 16 of 55
-
8/10/2019 1D Beam
17/55
1D beam 11/25/2008
Nemetschek Scia 17 of 55
-
8/10/2019 1D Beam
18/55
1D beam 11/25/2008
Nemetschek Scia 18 of 55
Select "1D Member -> Member"with a double-click
-
8/10/2019 1D Beam
19/55
1D beam 11/25/2008
Nemetschek Scia 19 of 55
-
8/10/2019 1D Beam
20/55
1D beam 11/25/2008
Nemetschek Scia 20 of 55
You can give eachmember a name
-
8/10/2019 1D Beam
21/55
1D beam 11/25/2008
Nemetschek Scia 21 of 55
A "Type" can be specified.
-
8/10/2019 1D Beam
22/55
1D beam 11/25/2008
Nemetschek Scia 22 of 55
-
8/10/2019 1D Beam
23/55
1D beam 11/25/2008
Nemetschek Scia 23 of 55
-
8/10/2019 1D Beam
24/55
1D beam 11/25/2008
Nemetschek Scia 24 of 55
-
8/10/2019 1D Beam
25/55
1D beam 11/25/2008
Nemetschek Scia 25 of 55
-
8/10/2019 1D Beam
26/55
1D beam 11/25/2008
Nemetschek Scia 26 of 55
A cross section can be chosen
Click on HEA220 profile
-
8/10/2019 1D Beam
27/55
1D beam 11/25/2008
Nemetschek Scia 27 of 55
-
8/10/2019 1D Beam
28/55
1D beam 11/25/2008
Nemetschek Scia 28 of 55
-
8/10/2019 1D Beam
29/55
1D beam 11/25/2008
Nemetschek Scia 29 of 55
For each 1D member, there is a system-line and a reference line.
The system-line is the line inputted by the user.The reference line corresponds to the centroidal axis of the 1D member.
Normally the system-line is in the center of the profile (and the same as the reference line).When changing this system-line to e.g. top, the system-line is at the top of the profile.Or: the profile is below the system-line and will have a certain eccentricity.
Click on the screen to continue
-
8/10/2019 1D Beam
30/55
1D beam 11/25/2008
Nemetschek Scia 30 of 55
An eccentricity can also be inputted by a value for the local y- or z-direction, with the possibilities "ey" and
"ez".
-
8/10/2019 1D Beam
31/55
1D beam 11/25/2008
Nemetschek Scia 31 of 55
-
8/10/2019 1D Beam
32/55
1D beam 11/25/2008
Nemetschek Scia 32 of 55
-
8/10/2019 1D Beam
33/55
1D beam 11/25/2008
Nemetschek Scia 33 of 55
A rotation for the LCS(local coordinate system) can be inputted.
With this option it is possible to rotate the profile
-
8/10/2019 1D Beam
34/55
1D beam 11/25/2008
Nemetschek Scia 34 of 55
-
8/10/2019 1D Beam
35/55
1D beam 11/25/2008
Nemetschek Scia 35 of 55
When the beam can take only axial forces,the FEM type option can be changed in
"Axial force only".
-
8/10/2019 1D Beam
36/55
1D beam 11/25/2008
Nemetschek Scia 36 of 55
-
8/10/2019 1D Beam
37/55
1D beam 11/25/2008
Nemetschek Scia 37 of 55
The structure can be divided in different layers.It is possible to look at the results for one specific layer, or make some layers invisible.
With the option "Layer", this beam canbe inputted in a specific layer.
-
8/10/2019 1D Beam
38/55
1D beam 11/25/2008
Nemetschek Scia 38 of 55
Click OK
-
8/10/2019 1D Beam
39/55
1D beam 11/25/2008
Nemetschek Scia 39 of 55
The command line is telling you what to do:
"Select start
point"
-
8/10/2019 1D Beam
40/55
1D beam 11/25/2008
Nemetschek Scia 40 of 55
You can give in the coordinatesof the start point in the command line.
Or you can simply click on the start point.
Click on the point (0;0;0) to insert your beam
-
8/10/2019 1D Beam
41/55
1D beam 11/25/2008
Nemetschek Scia 41 of 55
Here you can see the coordinatesof your mouse.
-
8/10/2019 1D Beam
42/55
1D beam 11/25/2008
Nemetschek Scia 42 of 55
The following step is to choose the endpoint of thebeam
This is the endpoint of the beam.Click here
-
8/10/2019 1D Beam
43/55
1D beam 11/25/2008
Nemetschek Scia 43 of 55
Pressing on the Esc buttonends this function
-
8/10/2019 1D Beam
44/55
1D beam 11/25/2008
Nemetschek Scia 44 of 55
By pressing again on Esc,you can deselect the beam
-
8/10/2019 1D Beam
45/55
1D beam 11/25/2008
Nemetschek Scia 45 of 55
Your first beam has been inserted now!
Let's take a look at the view possibilities.
-
8/10/2019 1D Beam
46/55
1D beam 11/25/2008
Nemetschek Scia 46 of 55
Click on this option to see your beam surface
-
8/10/2019 1D Beam
47/55
1D beam 11/25/2008
Nemetschek Scia 47 of 55
Click here to render your structure
-
8/10/2019 1D Beam
48/55
1D beam 11/25/2008
Nemetschek Scia 48 of 55
Click here to view the name of the nodes on your screen
-
8/10/2019 1D Beam
49/55
1D beam 11/25/2008
Nemetschek Scia 49 of 55
Make the node names invisible again
-
8/10/2019 1D Beam
50/55
1D beam 11/25/2008
Nemetschek Scia 50 of 55
Click here to see
the name of the beam(s)
-
8/10/2019 1D Beam
51/55
1D beam 11/25/2008
Nemetschek Scia 51 of 55
Click again to make it invisible
-
8/10/2019 1D Beam
52/55
1D beam 11/25/2008
Nemetschek Scia 52 of 55
The dot grid can be madevisible or invisible with this option
Click to make it invisible
-
8/10/2019 1D Beam
53/55
1D beam 11/25/2008
Nemetschek Scia 53 of 55
Click again to make it visible again
-
8/10/2019 1D Beam
54/55
1D beam 11/25/2008
Nemetschek Scia 54 of 55
-
8/10/2019 1D Beam
55/55
1D beam 11/25/2008