11
Conversion Solutions
Easy, inexpensive solutions for converting analog to digital and upgrading Wiegand to WSE
22
Introduction
Conversion Solutions advantage Conversion Solutions products Conversion Solutions configurations Conclusion
33
What is Conversion Solutions?
Easily convert Schlage Electronics and Westinghouse analog systems to advanced digital technology
Upgrade from Wiegand to WSE digital Maintain current investment in access control
technology Easy, inexpensive, fast conversion Get the benefits of digital technology
Advantage
44
The advantages of WSE digital 1 of 2
More convenient access Longer read ranges Faster read times
More secure and flexible Multiple technology support
More convenient card options Multiple-technology Badge Key Fobs Inventory control tags
Less expensive cards
Advantage
55
The advantages of WSE digital 2 of 2
Faster, more dependable control 32-bit technology
Easier, more expansive installation and expansion 4,000 foot wire runs
between controller and reader
Daisy chaincomponents
Less expensive 30% plus cheaper
Advantage
66
Choice of solutions for specific applications
NexLine coax adapter which allows the transfer of both power and data over coax
NexLine Plus is an MSM replacement that converts four MSM points to
4-state RS-485
NexStar S-Net multiplexer converts home-run wiring to S-Net protocol
Wiegand Interface Unit w/ DR 4205W Upgrade Wiegand to WSE Maintain Wiegand physical interface
Products
77
NexLine Coax Adapter
Converts coaxial wire runs to twisted pair
Use existing coax in digital network
Transfers power and data over coax
Saves time and money Simple installation, install
on both ends of coaxial run
Combine multiple S-Net runs with NexStar
Products
88
NexLine Plus coax adapter/MSM replacement
Uses existing coaxial cable and monitor point wire
Replaces MSM removed during conversion process
Monitors point signals between four monitor inputs and a NexSentry Controller
Supports the already installed monitor point wires
Reliable transfer of power and digital data over coax
Simple installation
Products
99
NexStar S-Net multiplexer
Link between access control unit and multiple S-Net runs
Use existing coaxial cable to connect digital readers and other S-Net devices
Upgrade Wiegand system to WSE digital Uses existing wiring to multiplex
into home run wiring scheme
Allows home run wiring to connect between S-Net devices and a controller
Repeater function allows 4,000 ft. plus wire run
Products
1010
NexSentry WIU • Wiegand Interface Unit w/ DR 4205W Wiegand Proximity Reader
Use existing wiring and physical interface protocol in upgrade to WSE digital
Supports 26- and 34-bit 5-wire Wiegand protocol
Interfaces between one controller and four DR 4205s
DR4205W DigiReader, WSE proximity with up to six inch read range
Easy installation
Products
1616
Conclusion
Easiest analog to digital conversion Maintain current investment in access control system
Use existing coax Use existing components
Gain benefits of WSE digital Easy installation Inexpensive