1
AMS 572
ANOVA: One-Way, Two-Way, and Multiway.
2
Group 3
1 – Intro & Hist. - Na Chan2 – Basics of ANOVA - Alla Tashlitsky3 - Data Collection - Bryan Rong4 - Checking Assumptions in SAS - Junying Zhang5 - 1-Way ANOVA derivation - Yingying Lin and Wenyi Dong6 - 1-Way ANOVA in SAS - Yingying Lin and Wenyi Dong7 - 2-Way ANOVA derivation - Peng Yang8 - 2-Way ANOVA in SAS - Phil Caffrey and Yin Diao9 - Multi-Way ANOVA Derivation - Michael Biro10 - ANOVA and Regression – Cris (Jiangyang) Liu
3
Intro & History
Na Chen
4
USES OF T-TEST
• A one-sample location test of whether the mean of a normally distributed population has a value specified in a null hypothesis.
• A two sample location test of the null hypothesis that the means of two normally distributed populations are equal
5
USES OF T-TEST
• A test of the null hypothesis that the difference between two responses measured on the same statistical unit has a mean value of zero
• A test of whether the slope of a regression line differs significantly from 0
6
BACKGROUND
• If comparing means among > 2 groups, 3 or more t-tests are needed
-Time-consuming (Number of t-tests
increases)
-Inherently flawed (Probability of making a Type I error increases)
7
RONALD A.FISHER
• Biologist• Eugenicist• Geneticist• Statistician “A genius who almost single-handedly created the
foundations for modern statistical science” - Anders Hald “The greatest of Darwin's successors” -Richard Dawkins
Informally used by researchers in the 1800s
Formally proposed by Ronald A. Fisher in 1918
8
HISTORY
• Fisher proposed a formal analysis of variance in his paper The Correlation Between Relatives on the Supposition of Mendelian Inheritance in 1918.
• His first application of the analysis of variance was published in 1921.
• Become widely known after being included in Fisher's 1925 book Statistical Methods for Research Workers in 1925.
9
DEFINITION
• An abbreviation for: ANalysis Of VAriance
• The procedure to consider means from k independent groups, where k is 2 or greater.
10
ANOVA and T-TEST
• ANOVA and T-Test are similar -Compare means between groups • 2 groups, both work
• 2 or more groups, ANOVA is better
11
TYPES
• ANOVA - analysis of variance – One way (F-ratio for 1 factor ) – Two way (F-ratio for 2 factors)
• ANCOVA - analysis of covariance
• MANOVA - multiple analysis
12
APPLICATION
• Biology• Microbiology• Medical Science• Computer Science• Industry • Finance
13
Basics of ANOVA
Alla Tashlitsky
14
Definition
• ANOVA can determine whether there is a significant relationship between variables. It is also used to determine whether a measurable difference exists between two or more sample means.
• Objective: To identify important independent variables (predictor variables – yi’s) and determine how they affect the response variables.
• One-way, two-way, or multi-way ANOVA depend on the number of independent variables there are in the experiment that affect the outcome of the hypothesis test.
15
Model & Assumptions
• (Simple Model)
• E(εi) = 0
• Var(ε1) = Var(ε2) = … = Var(εk): homoscedasticity
• All εi’s are independent.
• εi ~ N(0,σ2)
16
Classes of ANOVA
1. Fixed Effects: concrete (e.g. sex, age)
2. Random Effects: representative sample (e.g. treatments, locations, tests)
3. Mixed Effects: combination of fixed and random
17
Procedure• H0: µ1=µ2=…=µk vs
Ha: at least one the equalities doesn’t hold
• F~fk,n-(k+1),α = MSR/MSE = t2 (when there are only 2 means)– Where mean square regression: MSR = SSR/1 and mean
square error: MSE = SSE/n-2
• The rejection region for a given significance level is F > f
18
Regression• SST (sum of squares total) = SSR (sum of
squares regression) + SSE (sum of squares error)
•
• Sample variance: S2 = MSE = SSE/n-k → Unbiased estimator for σ2
n
i
n
i
n
i
yyyyyy iiiiSST
1
2
1
2
1
2
)ˆ()ˆ()(
19
Mean Variation
20
Data Collection
Bryan Rong
21
Data Collection
• 3 industries – Application Software, Credit Service, Apparel Stores
• Sample 15 stocks from each industry• For each stock, we observed the last 30 days
and calculated– Mean daily percentage change– Mean daily percentage range– Mean Volume
22
Application software
• CA, Inc. [CA] • Compuware Corporation [CPWR] • Deltek, Inc. [PROJ] • Epicor Software Corporation [EPIC] • Fundtech Ltd. [FNDT] • Intuit Inc. [INTU] • Lawson Software, Inc. [LWSN] • Microsoft Corporation [MSFT• MGT Capital Investments, Inc. [MGT] • Magic Software Enterprises Ltd. [MGIC] • SAP AG [SAP] • Sonic Foundry, Inc. [SOFO] • RealPage, Inc. [RP] • Red Hat, Inc. [RHT] • VeriSign, Inc. [VRSN]
23
Credit Service
• Advance America, Cash Advance Centers, Inc. [AEA]• Alliance Data Systems Corporation [ADS] • American Express Company [AXP] • Asset Acceptance Capital Corp. [AACC] • Capital One Financial Corporation [COF] • CapitalSource Inc. [CSE] • Cash America International, Inc. [CSH] • Discover Financial Services [DFS] • Equifax Inc. [EFX] • Global Cash Access Holdings, Inc. [GCA] • Federal Agricultural Mortgage Corporation [AGM]• Intervest Bancshares Corporation [IBCA] • Manhattan Bridge Capital, Inc. [LOAN] • MicroFinancial Incorporated [MFI] • Moody's Corporation [MCO]
24
APPAREL STORES
• Abercrombie & Fitch Co. [ANF] • American Eagle Outfitters, Inc. [AEO] • bebe stores, inc. [BEBE] • DSW Inc. [DSW] • Express, Inc. [EXPR]• J. Crew Group, Inc. [JCG] • New York & Company, Inc. [NWY] • Nordstrom, Inc. [JWN] • Pacific Sunwear of California, Inc. [PSUN]• The Gap, Inc. [GPS] • The Buckle, Inc. [BKE] • The Children's Place Retail Stores, Inc. [PLCE]• The Dress Barn, Inc. [DBRN] • The Finish Line, Inc. [FINL] • Urban Outfitters, Inc. [URBN]
25
26
27
Final Data look
28
Checking Assumptions
ZhangJunying
29
Major Assumptions of Analysis of Variance
• The Assumptions– Normal populations– Independent samples– Equal (unknown) population variances
• Our Purpose– Examine these assumptions by graphical analysis of residual
30
Residual plot
• Violations of the basic assumptions and model adequacy can be easily investigated by the examination of residuals.
• We define the residual for observation j in treatment i as
• If the model is adequate, the residuals should be
structureless; that is, they should contain no obvious patterns.
ijijij yye
31
Normality
• Why normal?– ANOVA is an Analysis of Variance – Analysis of two variances, more specifically, the ratio of two variances– Statistical inference is based on the F distribution which is given by
the ratio of two chi-squared distributions– No surprise that each variance in the ANOVA ratio come from a parent
normal distribution• Normality is only needed for statistical inference.
32
Sas code for getting residual
PROC IMPORT datafile = 'C:\Users\junyzhang\Desktop\mydata.xls' out = stock;RUN;PROC PRINT DATA=stock;RUN;Proc glm data=stock;Class indu;Model adpcdata=indu;Output out =stock1 p=yhat r=resid;Run;PROC PRINT DATA=stock1;RUN;
33
Normality test
The normal plot of the residuals is used to check the normality test.
proc univariate data= stock1 normal plot; var resid;run;
Normality Tests
Tests for Normality
Test --Statistic--- -----p Value------
Shapiro-Wilk W 0.731203 Pr < W <0.0001Kolmogorov-Smirnov D 0.206069 Pr > D <0.0100Cramer-von Mises W-Sq 1.391667 Pr > W-Sq <0.0050Anderson-Darling A-Sq 7.797847 Pr > A-Sq <0.0050
Tests for Normality
Test --Statistic--- -----p Value------
Shapiro-Wilk W 0.989846 Pr < W 0.6521Kolmogorov-Smirnov D 0.057951 Pr > D >0.1500Cramer-von Mises W-Sq 0.03225 Pr > W-Sq >0.2500Anderson-Darling A-Sq 0.224264 Pr > A-Sq >0.2500
Normal Probability Plot 2.3+ ++ * | ++* | +** | +** | **** | *** | **+ | ** | *** | **+ | *** 0.1+ *** | ** | *** | *** | ** | +*** | +** | +** | **** | ++ | +* -2.1+*++ +----+----+----+----+----+----+----+----+----+----+
-2 -1 0 +1 +2
Normal Probability Plot
8.25+
| *
|
|
| *
|
| *
| +
4.25+ ** ++++
| ** +++
| *+++
| +++*
| ++****
| ++++ **
| ++++*****
| ++******
0.25+* * ******************
+----+----+----+----+----+----+----+----+----+----+
34 34
NormalityTests
35
36
Independence
• Independent observations– No correlation between error terms– No correlation between independent variables and error
• Positively correlated data inflates standard error– The estimation of the treatment means are more accurate than the
standard error shows.
37
SAS code for independence test
The plot of the residual against the factor is used to check the independence.
proc plot; plot resid* indu; run;
Independence Tests
38
39
Homogeneity of Variances
• Eisenhart (1947) describes the problem of unequal variances as follows– the ANOVA model is based on the proportion of the mean squares
of the factors and the residual mean squares – The residual mean square is the unbiased estimator of 2, the
variance of a single observation – The between treatment mean squares takes into account not only
the differences between observations, 2, just like the residual mean squares, but also the variance between treatments
– If there was non-constant variance among treatments, we can replace the residual mean square with some overall variance, a
2, and a treatment variance, t
2, which is some weighted version of a2
– The “neatness” of ANOVA is lost
40
Sas code for Homogeneity of Variances test
The plot of residuals against the fitted value is used to check constant variance assumption.
proc plot; plot resid* yhat;run;
Data with homogeneity of Variances
41
Tests for Homogeneity of Variances
42
Result about our data
– Normal populations
– Nearly independent samples
– Equal (unknown) population variances
So we can employ ANOVA to analyze our data.
43
44
1-Way ANOVA
Yin gying Lin&
Wenyi Dong
Derivation and SAS
45
Derivation – 1-Way ANOVA
• Hypotheses– H0: μ= μ1 = μ2 = μ3 = … = μn
– H1: μi ≠ μj for some i,j
• We assume that the jth observation in group i is related to the mean by xij = μ+ (μi – μ) + εij, where εij is a random noise term.
• We wish to separate the variability of the individual observations into parts due to differences between groups and individual variability
46
Derivation – 1-Way ANOVA – Cont’
47
Derivation – 1-Way ANOVA – Cont’
• We can show that
• Using the above equation, we define
48
Derivation – 1-Way ANOVA – Cont’
• Given the distributions of the MSS values, we can reject the null hypothesis if the between group variance is significantly higher than the within group variance. That is,
• We reject the null hypothesis if F > fn-1,N-n,α
49
Brief Summary Statistics
• Codeproc means data=stock maxdec=5 n mean std;by industry;var ADPC;
Get simple summary statistics(sample size, sample mean and SD of each industry) with max of 5 decimal places
50
Brief Summary Statistics
• Output
Industry N Mean Std Dev
Apparel Stores
15 0.00253 0.00356
Application Software
15 0.00413 0.00742
Credit Service 15 0.00135 0.00443
51
Data Plot
• Codeproc plot data=stock;plot industry*ADPC;
Produce crude graphical output
52
Data Plot
• Output Plot of industry*ADPC. Legend: A = 1 obs, B = 2 obs, D = 4 obs. industry |CreditSe + A A B A AAA AABA A A
Applicat + A D A AAAAA A A A A
ApparelS + AA B A B B B A BA | -+---------+---------+---------+---------+---------+---------+---------+----- -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0.025
ADPC
53
One Way ANOVA Test• Code• proc anova data=stock;• class industry;• model ADPC=industry;
• means industry/tukey cldiff;
• means industry/tukey lines;
Class statement indicates that “industry” is a
factor.
Assumes”industry”influences average daily percentage change.
Multiple comparison by Tukey’s method—get actual Confidence Intervals.
Get pictorial display of
comparisons.
54
GLM analysis
• Codeproc glm data=stock;class industry; model ADPC=industry;output out=stockfit p=yhat r=resid;
This procedure is similar to 'proc anova' but 'glm' allows residual plots but gives more junk
output.
55
One Way ANOVA Test
• Output Dependent Variable: ADPC Sum of Source DF Squares Mean Square F Value Pr > F Model 2 0.00005833 0.00002916 1.00 0.3757 Error 42 0.00122217 0.00002910 Corrected Total 44 0.00128050 R-Square Coeff Var Root MSE ADPC Mean 0.045552 201.8054 0.005394 0.002673 Source DF Anova SS Mean Square F Value Pr > F industry 2 0.00005833 0.00002916 1.00 0.3757
1.00 0.3757
56
One Way ANOVA Test
Tukey's Studentized Range (HSD) Test for ADPCAlpha Error Degrees of Freedom Error Mean Square Critical Value of Studentized Range Minimum Significant Difference
0.0542
.0000293.43582
.0048
57
One Way ANOVA Test
Difference Industry Between Simultaneous 95%Comparison Means Confidence LimitsApplicat - ApparelS 0.001601 -0.003184 0.006387Applicat - CreditSe 0.002778 -0.002008 0.007563ApparelS - Applicat -0.001601 -0.006387 0.003184ApparelS - CreditSe 0.001177 -0.003609 0.005962CreditSe - Applicat -0.002778 -0.007563 0.002008CreditSe - ApparelS -0.001177 -0.005962 0.003609
58
Univariate Procedure
• Code• proc univariate data=stockfit plot normal;• var resid;
We use the proc univariate to produce the stem-and-leaf and normal
probability plots and we use the stem-leaf plot to visualize the overall
distribution of a variable.
59
Univariate Procedure
• Output MomentsN 45 Sum Weights 45Mean 0 Sum Observations 0Std Deviation 0.00527035 Variance 0.00002778Skewness 1.33008795 Kurtosis 5.46395169UncorrectedSS 0.00122217Corrected SS 0.00122217Coeff Variation . Std Error Mean 0.00078566
60
Tests for Location: Mu0=0
Test -Statistic- -----p Value------ Student's t t 0 Pr > |t| 1.0000 Sign M -1.5 Pr >= |M| 0.7660Signed Rank S -43.5 Pr >= |S| 0.6288
61
Basic Statistical Measures
Location Variability Mean 0.00000 Std Deviation 0.00527Median -0.00048 Variance 0.0000278 Mode . Range 0.03389 Interquartile Range 0.00623
62
Tests for Normality
Test --Statistic--- -----p Value------ Shapiro-Wilk W 0.904256 Pr < W 0.0013Kolmogorov-Smirnov D 0.112584 Pr > D >0.1500Cramer-von Mises W-Sq 0.096018 Pr > W-Sq 0.1266Anderson-Darling A-Sq 0.781507 Pr > A-Sq 0.0410
63
Quantiles Quantile Estimate 100% Max 0.021509105 99% 0.021509105 95% 0.007261567 90% 0.005106613 75% Q3 0.002667399 50% Median -0.000477723 25% Q1 -0.003565176 10% -0.004824061 5% -0.005444811 1% -0.012376248 0% Min -0.012376248
64
Extreme Observations
-------Lowest------- -------Highest------ Value Obs Value Obs -0.01237625 41 0.00510661 6 -0.00807339 25 0.00596875 34 -0.00544481 13 0.00726157 29 -0.00483936 3 0.00814126 27 -0.00482406 28 0.02150911 22
65
Stem Leaf Plot and Boxplot Stem Leaf # Boxplot 20 5 1 * 18 16 14 12 10 8 1 1 | 6 03 2 | 4 4561 4 | 2 0027922 7 +-----+ 0 334669 6 | + | -0 9809753 7 *-----* -2 97688551 8 +-----+ -4 4888772 7 | -6 | -8 1 1 | -10 | -12 4 1 | ----+----+----+----+ Multiply Stem.Leaf by 10**-3
66
Plot
• Code • proc plot;• plot resid*industry;• plot resid*yhat;• run;
Plot the qq graph of residual VS industry, and residual VS the approximated ADPC value.
67
Normal Probability Plot
0.021+ * | | | | +++ | ++++ | ++* | ++++* | ++***** | +***** | +**** | ***** | ****** | * ******+ | ++++ | *++ | ++++ -0.013++++* +----+----+----+----+----+----+----+----+----+----+ -2 -1 0 +1 +2
68
Graph 0.025 + | A 0.020 + 0.010 + | A | A | A 0.005 + B | A A | A C | B A B | A 0.000 + C B | A B | A B A | A B | B A A -0.005 + B D | A -0.010 + | A -0.015 + | ---+-------------------------+-------------------------+-- industry ApparelS Applicat CreditSe
Plot of resid*industry.
Legend: A = 1 obsB = 2 obsD = 4 obs
69
Plot of resid*yhatresid0.025 + | A0.010 + | A | A | A 0.005 + B | A A | C A | B B A | A 0.000 + B C | A B | A A B | B A | A B A-0.005 + B D | A | A-0.015 + --+------------+------------+------------+------------+------------+------------ 0.0010 0.0015 0.0020 0.0025 0.0030 0.0035 yhat
Plot of resid*yhat. Legend: A = 1 obs, B = 2 obs,D=4 obs.
70
Conclusion
• After the analysis of one way anova test,we can get the result of F=1.00 and p=0.3757. Since the p-value is bigger, we accept the null hypothesis which indicates that there is no difference between the mean of daily average percentage change of stocks of different industries. Thus, there is no different if we buy the stocks in different industries in the long term.
71
2-Way ANOVA
Peng YangPhil Caffrey
Yin Diao
Derivation and SAS
72
2-Way ANOVADerivation
We now have two factors (A & B)
A B
𝒂𝟏
𝒂𝟐
𝒂𝒊
𝒃𝟏
𝒃𝟏
𝒃 𝒋… …
Totaling n
Tests to Conduct
73
2-Way ANOVADerivation
Linear Model
𝑿 𝒊𝒋𝒌=𝝁+𝝉 𝒊+𝜷 𝒋+(𝝉𝜷 )𝒊𝒋+𝝐𝒊𝒋𝒌
Dot Notation
letting
.
74
2-Way ANOVADerivation
Least Square Method
∑𝒊=𝟏
𝒂
∑𝒋=𝟏
𝒃
∑𝒌=𝟏
𝒏
( 𝒙𝒊𝒋𝒌− �̂�… )𝟐
¿∑𝑖=1
𝑎
∑𝑗=1
𝑏
∑𝑘=1
𝑛
(𝑥𝑖 ..−𝑥…)2+¿∑𝑖=1
𝑎
∑𝑗=1
𝑏
∑𝑘=1
𝑛
(𝑥 . 𝑗 .−𝑥… )2+∑𝑖=1
𝑎
∑𝑗=1
𝑏
∑𝑘=1
𝑛
(𝑥 𝑖𝑗 .−𝑥𝑖 ..−𝑥 . 𝑗 .−𝑥…)2+¿∑𝑖=1
𝑎
∑𝑗=1
𝑏
∑𝑘=1
𝑛
(𝑥 𝑖𝑗𝑘− 𝑥𝑖𝑗 .)2¿¿
¿𝑏𝑛∑𝑖=1
𝑎
�̂� 𝑖2+𝑎𝑛∑
𝑖=1
𝑏
�̂� 𝑗2+𝑛∑
𝑖=1
𝑎
∑𝑗=1
𝑏
𝜏𝛽 𝑖𝑗2+∑
𝑖=1
𝑎
∑𝑗=1
𝑏
∑𝑘=1
𝑛
𝑒𝑖𝑗𝑘2
SST = SSA + SSB+ SSAB + SSE
SST = SSA + SSB+ SSAB + SSE
𝒃𝒏∑
𝒊=𝟏
𝒂
�̂� 𝒊𝟐
𝒂𝒏∑𝒊=𝟏
𝒃
�̂� 𝒋𝟐
𝒏∑𝒊=𝟏
𝒂
∑𝒋=𝟏
𝒃
𝝉𝜷𝒊𝒋𝟐
∑𝒊=𝟏
𝒂
∑𝒋=𝟏
𝒃
∑𝒌=𝟏
𝒏
𝒆𝒊𝒋𝒌𝟐
(𝑵 −𝟏 )
𝑫 .𝑭 .
(𝒂−𝟏 )
(𝒃−𝟏 )
(𝒂−𝟏 ) (𝒃−𝟏 )
(𝑵 −𝒂𝒃 )
75
2-Way ANOVADerivation
Test Criteria
At least one
At least one
At least one
Rejection Conditions
76
2-Way ANOVADerivation
Pivotal Quantity
At least one
𝑿 𝒊𝒋𝒌=𝝁+𝝉 𝒊+𝜷 𝒋+(𝝉𝜷 )𝒊𝒋+𝝐𝒊𝒋𝒌𝑿 𝒊𝒋𝒌=𝝁++𝜷 𝒋+(𝝉𝜷 )𝒊𝒋+𝝐 𝒊𝒋𝒌𝝉 𝒊
𝒙 𝒊𝒋𝒌=𝝁+𝜷 𝒋+(𝝉𝜷)𝒊𝒋+𝒆𝒊𝒋𝒌
77
2-Way ANOVADerivation
Pivotal Quantity (Cont’)
𝑺𝑺𝑬 ′=∑𝒊=𝟏
𝒂
∑𝒋=𝟏
𝒃
∑𝒌=𝟏
𝒏
(𝒆𝒊𝒋𝒌− �̂� 𝒊 )𝟐
¿∑𝒊=𝟏
𝒂
∑𝒋=𝟏
𝒃
∑𝒌=𝟏
𝒏
𝒆𝒊𝒋𝒌𝟐+∑
𝒊=𝟏
𝒂
∑𝒋=𝟏
𝒃
∑𝒌=𝟏
𝒏
�̂�𝒊𝟐+𝟐∑
𝒊=𝟏
𝒂
∑𝒋=𝟏
𝒃
∑𝒌=𝟏
𝒏
(𝒆𝒊𝒋𝒌 �̂� 𝒊 )𝟐
¿𝑺𝑺𝑬+𝑺𝑺𝑨
𝑴𝑺𝑨=𝑺𝑺𝑨𝒂−𝟏
𝑴𝑺𝑬=𝑺𝑺𝑬𝑵 −𝒂𝒃
∴
𝒔𝑬𝟐= 𝑺𝑺𝑬
(𝑵−𝒂𝒃 )𝝈𝟐
(𝑵 −𝒂𝒃)∗ 𝝌𝑵−𝒂𝒃−𝟏
𝟐
78
Two-Way ANOVA in SAS
By: Philip Caffrey&
Yin Diao
79
Model
• An extension of one way ANOVA. It provides more insight about how the two IVs interact and individually affect the DV. Thus, the main effects and interaction effects of two IVs have on the DV need to be tested.
• Model:
• Null hypothesis:
𝑿 𝒊𝒋𝒌=𝝁+𝝉 𝒊+𝜷 𝒋+(𝝉𝜷 )𝒊𝒋+𝝐𝒊𝒋𝒌
At least one
At least one
At least one
80
Sum of Squares
Every term compared with the error term leads to F distribution. In this way, we can conclude whether there is main effect or interaction effect.
SSTOTAL = SSA + SSB + SSINTERACTION + SSERROR
81
Example
Using the same data from the One-Way analysis, we will now separate the data further by introducing a second factor, Average Daily Volume.
82
Example
Factor 1: Industry• Apparrel Stores• Application Software• Credit Services
Factor 2: Average Daily Volume• Low• Medium• High
Two-Way Design
INDUSTRY
Credit Apparel Software
VOLUME
Low
Medium
High
Repeat 5 times each
83
84
Using SAS
SAS code:
PROC IMPORT DATAFILE=PROC IMPORT DATAFILE='G:\Stony Brok Univ Text Books\AMS Project\Data.xls'
OUT=TWOWAY;RUN;
PROC ANOVA DATA = TWOWAY;TITLE “ANALYSIS OF STOCK DATA”;
CLASS INDUSTRY VOLUME;MODEL ADPC = INDUSTRY | VOLUME;MEANS INDUSTRY | VOLUME / TUKEY CLDIFF;
RUN;
85
/*PLOT THE CELL MEANS*/
PROC MEANS DATA=WAY NWAY NOPRINT;CLASS INDT ADTV;VAR ADPC;OUTPUT OUT=MEANS MEAN=;RUN;
PROC GPLOT DATA=MEANS;PLOT INDT*ADTV;RUN;
Using SAS
86
ANOVA TableTests of Between-Subjects Effects
Source Sum of
Squares df Mean
Square F Sig.
Corrected Model
.000a 8 3.335E-5 1.184 .335
Industry 6.906E-5 2 3.453E-5 1.226 .305
Volume 9.534E-5 2 4.767E-5 1.693 .198
Industry * Volume
7.950E-5 4 1.988E-5 .706 .593
Error .001 36 2.816E-5
Corrected Tota l
.001 44
No Sig. Results
87
To test the main effect of one IV, we should combine all the data of the other IV. And this is done in the one way ANOVA.
From the ANOVA we know there is no significant main effects or interaction effect of the two IVs.
To indicate if there is an interaction effect, we can plot of means of each cell formed by combination of all levels of IVs.
Using SAS
88
PLOT OF CELL MEANSIndustry by Average Daily Volume
89
Interpreting the Output
Given that the F tests were not significant we would normally stop our analysis here.
If the F test is significant, we would want to know exactly which means are different from each other.
Use Tukey’s Test. MEANS INDUSTRY | VOLUME / TUKEY CLDIFF;
90
Interpreting the Output
Comparing Means
Comparison Diff. b/w Means 95% CISoftware - Apparel 0.001601 [-0.003184 0.006387]
Software - Credit 0.002778 [-0.002008 0.007563]
Credit - Apparel -0.001177 [-0.005962 0.003609]
MedVol. - LowVol. -0.003698 [-0.008435 0.001038]
Med.Vol. - HighVol. -0.001252 [-0.005989 0.003484]
HighVol. - LowVol. -0.002446 [-0.007182 0.002290]
91
Conclusion
• We cannot conclude that there is a significant difference between any of the group means.
• The two IVs have no effects on the DV.
92
Mutli-Way ANOVA
Michael Biro&
Cris Liu
Derivation
93
M-way ANOVA (Derivation)
• Let us have n factors, A1,A2,…,An , each with 2 or more levels, a1,a2,…,an, respectively. Then there are N = a1a2…an types of treatment to conduct, with each treatment having sample size ni. Let xi1i2…ink be the kth observation from treatment i1i2…in
.
• By the assumption for ANOVA, xi1i2…ink is a random variable that follows the normal distribution. Using the model xi1i2…ink = µi1i2…ink + εi1i2…ink where each (residual) εi1i2…
ink are i.i.d. and follows N(0,σ2).
94
M-way ANOVA (Derivation)
Using “dot notation”, let
, , …, ,…, .
Let
, and , where is the grand mean (see above), is the mean effect of factor subtract by the grand
mean, and is the mean effect of factor subtract by the grand mean. Then we can model the above as a linear equation of
95
M-way ANOVA (Derivation)
Applying Least Square Estimation we get
Which is the ANOVA Identity,
96
M-way ANOVA (Derivation)
• These are all distributed as independent χ2
random variables (when multiplied by the correct constants and when some hypotheses hold) with d.f. satisfying the equation:
97
M-way ANOVA (Derivation)
• There are a total of 2m hypotheses in an m-way ANOVA.– The null hypothesis, which states that there is no
difference or interaction between factors– For k from 1 to m, there are mCk alternative
hypotheses about the interaction between every collection of k factors.
– Then we have 1 + mC1 + mC2 + … + mCm = 2m by a well known combinatorial identity.
98
M-way ANOVA (Derivation)
• These hypotheses are: At least one
At least one
...
At least one
At least one
...
Test for all combination of
99
M-way ANOVA (Derivation)
• We want to see if the variability between groups is larger that the variability within the groups.
• To do this, we use the F distribution as our pivotal quantity, and then we can derive the proper tests, very similar to the 1-way and 2-way tests.
100
M-way ANOVA (Derivation)
...
...
...
Continue to see whether all combination of
101
ANOVA and Regression
Presenter: Cris J.Y. Liu
RELATIONSHIP BETWEEN
102
• What we know:– regression is the statistical model that you use to predict
a continuous outcome on the basis of one or more continuous predictor variables.
– ANOVA compares several groups (usually categorical predictor variables) in terms of a certain dependent variable(continuous outcome )
( if there are mixture of categorical and continuous data, ANCOVA is an alternative method.)
• Take a second look: They are the just different sides of the same coin!
103
Review of ANOVA
• Compare the means of different groups• n groups, ni elements for ith group, N element
in total.• SST= +SSbetween SSwithin
How about only two group,X and Y,Each have n data?
104
Review of Simple Linear Regression
• We try to find a line y = β0 + β1 x that best fits our data so that we can calculate the best estimate of y from x
• It will find such β0 and β1 that minimize the distance Q between the actual and estimated score
• Let predicted value be of one group, while the other group consist all of original value ..
• It is a special (and also simple) case of ANOVA!
Minimize me
105
Review of Regression
= +
Total = Model + Error(Between) (Within)
d.f.: 2-1 = 1 d.f.:n-2d.f.: n-1
106
ANOVA table of Regression
107
How are they alike?
• If we use the group mean to be our X values from which we predict Y we can see that ANOVA and regression is the same!!
• The group mean is the best prediction of a Y-score.
108
Term comparison
Regression ANOVA Dependent variable
Explaintory variable
total mean
SSR SSbetween
SSE SSwithin
109
Term comparison
if more than one predictor…..
Regression ANOVA
Multiple Regression Multi-way ANOVA dummy variable categorical variable interaction effect covariance …………………. ……………
110
Notes:
• Both of them are applicable only when outcome variables are continuous.
• They share basically the same procedure of checking the underlying assumption.
111
Robust ANOVA
-Taguchi Method
112
What is Robustness?
• The term “robustness” is often used to refer to methods designed to be insensitive to distributional assumptions (such as normality) in general, and unusual observations (“outliers”) in particular.
• Why Robust ANOVA?• There is always the possibility that some observations may
contain excessive noise. • excessive noise during experiments might lead to incorrect
inferences. • Widely used in Quality control
113
Robust ANOVA
• What we want from robust ANOVA? robust ANOVA methods could withstand non-
ideal conditions while no more difficult to perform than ordinary ANOVA
• Standard technique----least squares method is highly sensitive to unusual observations
114
Robust ANOVA
Our aim is to minimize by choosing β:
In standard ANOVA, we let
we can also try some other ρ(x) .
115
Least absolute deviation
• It is well-known that the median is much more robust to outliers than the mean.
• least absolute deviation (LAD) estimate, which takes
• How is LAD related to median? the LAD estimator determines the “center” of the data set by minimizing the sum of the absolute deviations from the estimate of the center, which turns out to be the median.• It has been shown to be quite effective in the presence of
fat tailed data
116
M-estimation• M-estimation is based on replacing ρ(.) with a
function that is less sensitive to unusual observations than is the quadratic .
• The M means we should keep ρ follows MLE.• LSD with , is an example of a robust
M-estimator. • Another popular choice of ρ : Tukey bisquare:
and (;)1rcρ= otherwise, where r is the residual and c is a constant.
117
Suggestion
• these robust analyses may not take the place of standard ANOVA analyses in this context;
• Rather, we believe that the robust analyses should be undertaken as an adjunct to the standard analyses
118
Questions?
119
Thank You