Office : 117, Jaipur Tower, M. I. Road,Jaipur - 302001 Rajasthan, India.
Factory : G-24, RIICO Industrial Area,Phase-II, Bagru (Ext.), Jaipur-303007,Rajasthan, India.Mob. : +91-9414068933, 9983800031, 9983800021, 9414068900
Tel. : +91-141-5123039Fax : +91-141-2864821Email : [email protected], [email protected], [email protected] : www.diamondtools.in
Our Company has an expertise in selling
diamond tool for Stone Cutting, Concrete, Glass,
Masonry, Bricks, Metal Cutting, Ceramics,
Porcelain ,Wood, Power Tools and Garden Tools.
Our tools range from Circular Saws for Wet and
Dry cutting in Segmented, Continuous, Turbo
from dia 105mm to 4200mm. We are also
supplying blades for Green concrete in Normal
and Silent Core, Cured Concrete , Asphalt, Floor
Saws, Grinding Cup Wheels, Tuck Point Blades,
Turbo Wave Grinding Cup Wheel, Crack Chasers,
Diamond Core Drill Bits, Wall Cutting blades.
Further our Segments are used for cutting and
sawing Hard/ Medium Granite, Marble, Sand
Stone, Basalt, Mica, Lime Stone and Slates in
Single Saw and Multi Saw Blades . We also
supply Wire Saw Segments for Concrete,
Sandstone, Marble and Granite. We supply the
wire in Plastic and Rubber.
We also supply Gangsaw Segments, Mono
Dressing Segments for cutting all natural stone.
Our Focus is on Speed and Long Cutting Life .
With Innovative Technology and Modern
Equipments, we provide high quality products.
We hope we can establish long term business
relation with you for mutual benefits. We
request you further to kindly visit our website to
have more feel of our product range:
www.diamondtools.in If you need any
clarifications or have any questions, please do
not hesitate to contact us.
about us
Multi Wire Saw Diamond Multi Wire Slab For Granite Slab Cutting:
Multi Wire Saw for granite cutting is a technology developed for the enhancement of productivity in the granite
gangsaw industry, with saving on the cost of raw material sawn to the tune of 3% on an average of a granite block
sawn. The Multi Wire Saw also enables better surface finish on the slab sawn & the biggest advantage is the low
sawing cost. Further, there is an excellent cutting quality with accuracy and smooth cutting with low noise. There
is also a good amount of saving on the power & water consumption.
We supply the multi wire with 37 beads/ mtrs with 7.20 mm bead diameter. The average speed on mixed granite
is 6-10m2/ minute. The efficiency is measured by down feed per minute. Our multi wire is produced using high
strength plastic with good flexibility and no vibration while cutting.
Wire SawDiamond wire saw is one the most advanced tool widely used for quarrying and processing natural stones as well
as cutting and processing Sand Stone, Granite, Concrete, Asphalt, Marble etc.
The diamond wire technology for quarry can widely improve the efficiency of Sand Stone, Granite and Marble
quarry, reduce the waste of quarry resources. These wire assist in quarrying large dimensions of block, dress the
block, prominently boost the rate of output in quarry.
Diamond wire for quarries:
RubberPlastic
RubberPlastic
Gangsaw egments are one of the most advanced tools to cut large size blocks which cannot be sawn on block cutters
due to limitation of depth of cutting. We provide gang saw segments for 2.0 - 3.5 mm thickness blades. Our segments
are designed so as to give even cut in the thickness in slabs with no variations and chatter marks. We specialize in
cutting from most dense marble to the softest marble. We usually provide a height of 9.5 mm with no base but
however we can also provide 10 mm height segments.
Our ang aw egments are very famous in India, Egypt, Jordan and Europe.
S
We provide segments either in taper or in box as per your
requirements. G s S Turkey,
MONO DRESSING SEGMENTWe also provide mono dressing segments for
marble block squaring/dressing. These are
usually provided in box size, however we can
also give them in taper size.
GANGSAW SEGMENTS
Trimming Blades
TRIMMING BLADES Ø 350 - 600 MM Diamond circular saw blades are used for cutting and grinding all natural stones such as granite, marble, sand
stone, lime stone, slate, basalt and mica etc. We are manufacturing professional as well as universal blades
which ensures high quality and outstanding performance. We can supply these blades in horizontal and vertical
cutting. We design these blades keeping in mind the needs of the customer, so as to ensure the following:
• Easy and smooth cutting
• Good cutting results and high efficiency
• Long life span and stable performance
• Fine finish without chipping
We can provide hot pressed sintered diamond saw blades, laser welded diamond saw blades, braze welded
diamond saw blades, diamond saw blades with silent steel core, etc.
These blades are supplied as professional and economical blades. We also supply loose segments for these
blades for re tipping. The specification of blades are under.
Trimming Blades Ø 700 - 850 mm Diamond circular saw blades are used for cutting and grinding all natural stones such as granite, marble, sand
stone, lime stone, slate etc. As these are large diameter blades, we give special emphasis on the bonding and we
supply sandwich as well as box segments. We give complete blades as well as loose segments for this category.
These blades are famous for low power consumption and give perfect finish to the tiles from the block.
STANDARD DIMENSIONS
Saw
Diameter
No. of Slots
(narrow slot)
No. of Slots
(wide slot)
Core
Thick. (mm)
Segment
Length (mm)
Cutting
Width (mm) Height of DiamondImpregnation (mm)
700
800
850
50
58
58
40
46
46
4.0
4.5
4.5
40
30
30
6.0
6.5
6.5
8.0/10.0/12.0/15.0
8.0/10.0/12.0/15.0
8.0/10.0/12.0/15.0
Diamond tools for Stone Cutting
Saw Blades Ø 1000 - 4200 mm
Large circular saw blades are usually re tipped thus we mostly provide loose
segment for these blades. However we can also provide the complete saw
with segments, if required. Our segment of these dimensions are very
popular. We usually provide sandwich segments and multi layer segments,
so as to enable free cutting. Our segments can be used for water cutting &
any other lubricants. However we request customers to inform us in
advance the cutting medium, so as to design the tool accordingly. Our
segments cut the hardest of the stone, without any load on the machines
and the blade. Thus we guarantee free cutting segments with long life.
We have also designed low cost segments in this category and we
guarantee free cutting and adequate life for these segments also. Our
segments can be manufactured with height ranging from 10 mm upto 22
mm. We proudly state that our segments can absorb any condition of the
machine due to its inherent design of smooth cutting and latest state of art
technology. We also provide segments of blades of various sizes used on
single machine.
As we have an advance R&D and experienced tool designers with special
knowledge of metal bonding, our technology gets upgraded from time to
time.
Our segments and blades are used for cutting all natural stones such as
granite, marble, sand stone, lime stone, slate, basalt and mica etc. As these
are large diameter blades, we give special emphasis on the bonding and we
supply sandwich as well as box segments. We give complete blades as well
as loose segments for this category. These blades are famous for low power
consumption and give perfect finish to the slabs and tiles from the block.
We provide single blade and multi blades under this category.
Diamond tools for
Large Circular Saw
We supply multi blade segments for multi blades on diameters 900,
1000mm, 1200mm, 1300 and 1600mm and other sizes as per customer
requirement. Our segments are manufactured with utmost precision, so as
to avoid any taper or deviation in the final cut of the block. We provide free
cutting and long life segments for the Multi blades.
Our Multi-Blades segments are suitable for Italian Multi-blades machines
like: PEDRINI or SIMEC or any other manufactured multi blade machine .
Our specifications are as under.
Diameter (MM)
900
1000
1200
1300
1600
Segments Size (MM)
24x6.6/6.0x12
24x7.0/6.4x12
24x7.5/6.5x12
24x7.6/8.4x13
24x9.0/8.4x13
Seg. No/Blade (Pcs.)
64
70
80
88
108
We can also provide tailor made sizes as per the customer demand.
Multi Blade Saws with Diamond Segments Parameters:
Multi Blade
Saw
Diameter
No. of Slots
(narrow slot)
No. of Slots
(wide slot)
Core
Thick. (mm)
Segment
Length (mm)
Cutting
Width (mm) Height of DiamondImpregnation (mm)
STANDARD DIMENSIONS
1000
1100
1200
1250
1300
1350
1600
1800
2000
2200
2500
3000
3500
-
-
-
-
-
-
-
-
-
-
-
-
-
70
74
80
84
88
88
104
120
128
132
140
160
180
23
23
23
23
23
23
23
23
23
23
23
23
23
6.7/7.0
7.2/7.5/8.0
7.2/7.5/8.0
7.2/7.5/8.0
7.8/8.0
7.8/8.0
9.0/9.5
9.5
10.0/10.5
10.5
11.0/12.0
11.0/12.0
11.0/12.0
12.0/13.0/15.0
12.0/13.0/15.0
12.0/13.0/15.0
12.0/13.0/15.0
12.0/13.0/15.0
12.0/13.0/15.0
12.0/13.0/15.0/20.0
12.0/13.0/15.0/20.0
12.0/13.0/15.0/20.0
12.0/13.0/15.0/20.0
12.0/13.0/15.0/20.0
12.0/13.0/15.0/20.0
12.0/13.0/15.0/20.0
5.0
5.5
5.5
5.5
6.0
6.0
6.5/7.0
7.0
7.5/8.0
8.0
9.0
9.0
9.0
Diamond tools for
Reinforced Concrete & Asphalt
Circular Blades for Reinforced Concrete and Asphalt For Green Concrete and AsphaltWe are supplying diamond cutting tools for green and reinforced concrete from dia 300 to dia 1200. These diamond
blades are manufactured with wear resistant bonds and in certain cases they are supported by hard metal under cutting
protection. These are used on walk behind and flat saws machines. We can provide these blades with different arbor
sizes and segmented specification as desired.
SegmentHeight (mm)
SegmentThick.(mm)
Diameter
(mm) (inch)
Bore Size(mm/inch)
300
350
400
450
500
600
650
700
750
800
900
1000
1100
1200
12”
14”
16”
18”
20”
24”
28”
30”
32”
36”
38”
40”
44”
48”’
25.4/1”
25.4/1”
25.4/1”
25.4/1”
25.4/1”
25.4/1”
25.4/1”
25.4/1”
25.4/1”
25.4/1”
25.4/1”
25.4/1”
25.4/1”
25.4/1”
3.0
3.2
3.6
3.8
4.0
4.5
4.5
4.5
4.5
4.5
4.5-6.0
5.5-6.5
5.5-6.5
5.5-7.0
10/12
10/12
10/12
10/12
10/12
10/12
10/12
10/12
10/12
10/12
10/12
10/12
10/12
10/12
For Reinforced ConcreteThese blades are also manufactured with a
high wear resistant bond as the reinforced
concrete in very abrasive and thus needs a
tough bond. These are also used on walk
behind saw and flat saw machines. As the
process involves lot of heat generation while
cutting thus a laser welded saw blade is
manufactured by us, in order to protect the
brakeage of segments.
Grinding Segments
Wire SawsOur range of products
We are supplying diamond rollers for calibrating and
leveling of ceramic, vitrified and porcelain tiles so as to get
correct thickness an flatness on the surface. We also
supply roller segments for ceramic and porcelain tiles for
grinding and calibrating the surface.
We also supply diamond Grinding Cup Wheel for Ceramic,
porcelain and vitrified Tiles. Diamond cup wheels are
used for buffing and shaping ceramic, porcelain and
vitrified tiles. These are fitted on manual cutting machine
and manual grinding machines and are available from
diameter 100 mm to 200 mm.
Diamond Cutting Blade for Ceramic, Porcelain
and Vitrified Tiles
These blades are supplied in continuous rim from diameter
105 mm to 125 mm for ceramic, porcelain and vitrified tiles.
These blades are manufactured for fast cutting of the end
product. Special care is required while designing the tool in
order to avoid any chipping on the surface. These are fitted on
tile saw, bevel tile saw, angle grinder and circular saw. The rim
of this blade is of 1.5 mm thickness and 8 mm height. These
are supplied for dry cutting.
Antique Brushes We supply abrasive brush, antique brush, stone brush, wire
brush, diamond brush in Frankfurt and Fickert shape with top
quality filaments.
Frankfurt Abrasive Brush are used in hand and automatic
grinding machine . Fickert Abrasive Brush ,are used in granite
automatic grinding machine. Diameter 110mm Snail Lock
Abrasive Brush are used in side grinding machine and step
retreading machine. Diameter 130mm Snail Lock Abrasive
Brush are used in side grinding machine and step retreading
machine. Diameter 100mm for flex ,round brush differentiate
14mm(MA14) and 16mm(MA16) with inside diameter and
are used hand grinding machine . Diameter 200mm Abrasive
Brush are used in hand grinding machine. 250mm Abrasive
Brush ;this kind of brush is used in stone industrial polishing
lines .
These are available in the below sizes:
36#-46#-60#-80#-120#-180#-240#-320#-500#-800#-1000#.
DIAMOND POLISHING STONE BRUSHES
Ceramic, Porcelain & Vitrified Blades
We also supply continuous for wet cutting from
diameter105 mm to 300 mm.
We are also supplying music slot tile blade for wet cutting
application. These blades are ultra thin and due to the music
slots, it enables less stress on the blade while cutting and
are also less noisy. These are used for wet applications and
are manufactured from diameter from 180 mm to 350 mm.
Diamond Core Drill Bits are used for critically
hard materials such as concrete, all natural &
engineered stones, hard bricks, cured and
reinforced concrete, cement and bricks. These
are also used for tile and glass. These can be
used for wet and dry drilling. Our drill bits offers
very free drilling and high performance. These
are available from 25 mm to 350 mm. The useful
length of 350 mm and above makes the drill bits
convenient for re tippling once the diamond
segments are completely finished.
We can also supply loose segment for core drill,
as per specification.
Diamond Core Bits
Small Diamond BladesGeneral Purpose (DIY)
We are supplying small diamond blades, cold pressed or
laser welded for fast cutting, hard and abrasive
material. These blades range from dia 105 mm to dia
230 mm. These blades are manufactured in segmented,
turbo and continuous rim. These can be supplied either
for dry cutting or wet cutting and are available under
normal bond and long life bond.
SEGMENTED SMALL DIAMOND BLADE
FOR HARD AND ABRASIVE MATERIAL
TURBO SMALL DIAMOND BLADE FOR HARD AND ABRASIVE MATERIAL