download links & installation guide - electronic signature … · · 2018-01-053.0 –...

Copyright © 2018 Topaz Systems Inc. All rights reserved. For Topaz Systems, Inc. trademarks and patents, visit www.topazsystems.com/legal.

Download Links &

Installation Guide

SigPlusExtLite

Version 1.0 R1013

Last Update: January 3, 2018

http://www.topazsystems.com/termsconditions.html

2 www.topazsystems.com Back to Top

Topaz SigPlusExtLite User Installation Guide

Table of Contents

1.0 – Introduction ..................................................................................................................... 3

2.0 – Operating Systems Supported ...................................................................................... 3

3.0 – Installation Steps ............................................................................................................ 3

3.1 – Chrome ..........................................................................................................................................................3

3.1.1 – Install SigPlusExtLite ........................................ 3

3.1.2 – Install the SigPlusExtLite Chrome Extension .... 4

3.1.3 – Run the Sample Web Page ............................. 4

3.2 – Firefox ............................................................................................................................................................5

3.2.1 – Install SigPlusExtLite ........................................ 5 3.2.2 – Run the Sample Web Page ............................. 6

3.3 – Opera .............................................................................................................................................................7

3.3.1 – Install SigPlusExtLite ........................................ 7

3.3.2 – Install the SigPlusExtLite Opera Extension ....... 7

3.3.3 – Run the Sample Web Page ............................. 9

3.4 – Microsoft Edge ............................................................................................................................................ 10

3.4.1 – Install SigPlusExtLite ...................................... 10

3.4.2 – Certificate Installation ..................................... 11

3.4.3 – Package Installation ....................................... 14

3.4.4 – Sideloading .................................................... 16

3.4.5 – Run the Sample Web Page ........................... 18



1.0 – Introduction

With SigPlusExtLite, you can capture handwritten signatures securely in Chrome, Firefox,

Opera, and Edge browsers using Topaz signature pads. This document provides instructions

on installing Topaz SigPlusExtLite.

2.0 – Operating Systems Supported

Topaz SigPlusExtLite can be used with web pages running in the latest versions of Chrome,

Firefox, and Opera browsers installed on Windows 7/8.1/10 32-bit operating systems. The

Topaz SigPlusExtLite Edge Extension can also be integrated into web pages running in the

Edge browser installed on PCs running the Windows 10 operating system. For 64-bit Windows

operating systems running the 64-bit Chrome browser, SigPlusExtLite should be run as a 32-

bit application.

3.0 – Installation Steps

3.1 – Chrome

Using SigPlusExtLite in Chrome requires two steps. First, SigPlusExtLite must be installed.

Then, the SigPlusExtLite extension must be installed from the Chrome webstore.

3.1.1 – Install SigPlusExtLite

Look on the back of your signature pad, and find the model number (e.g., T-LBK460-HSB-R).

Then, select the correct option below:

1. If your signature pad model number ends in “-B-R”, “-HSB-R”, or “-BHSB-R”, download

and save SigPlusExtLite to your computer’s desktop from the following link:

www.topazsystems.com/Software/SigPlusExtLite.exe. Right-click on the

“SigPlusExtLite.exe” installer, and choose “Run as Administrator”. Then, follow the

steps in the installer.

2. If your signature pad model number ends in “-BSB-R” or “-BBSB-R”, download and save

SigPlusExtLite to your computer’s desktop from the following link:

www.topazsystems.com/Software/SigPlusExtLiteBSB.exe. Right-click on the

“SigPlusExtLiteBSB.exe” installer, and choose “Run as Administrator”. Then, follow the


http://www.topazsystems.com/Software/SigPlusExtLite.exe

http://www.topazsystems.com/Software/SigPlusExtLiteBSB.exe



3.1.2 – Install the Topaz SigPlusExtLite Chrome Extension

1. Start the Chrome Browser.

2. Go to the Topaz “SigPlusExtLite” Background Extension page by navigating to the URL:

https:/chrome.google.com/webstore/detail/Topaz-SigPlusExtLite-

back/dhcpobccjkdnmibckgpejmbpmpembgco.

3. In the opened page, click the “+ ADD TO CHROME” button displayed on the top right of

the page.

4. Click on the “Add extension” button in the confirmation dialog that appears.

3.1.3 – Run the Sample Web Page

After the SigPlusExtLite software is installed and the signature pad is connected to the PC,

launch Chrome and navigate to the following page:

www.sigplusweb.com/sign_chrome_ff_SigPlusExtLite.html.

Click on the “Sign” button, and the signing window will appear. Sign on your signature pad. To

accept the signature, click the green checkmark icon. To clear the signing window and re-sign,

click the red X. To cancel, click the red circle with the X.

https://chrome.google.com/webstore/detail/topaz-sigplusextlite-back/dhcpobccjkdnmibckgpejmbpmpembgco


http://www.sigplusweb.com/sign_chrome_ff_SigPlusExtLite.html



3.2 – Firefox

Using SigPlusExtLite in Firefox requires two steps. First, SigPlusExtLite must be installed.

Then, the SigPlusExtLite extension must be set up for Firefox.


Remove any previous version of the SigPlusExtLite Firefox extension from the Firefox Add-ons

manager page, Extension section.





www.topazsystems.com/Software/SigPlusExtLite.exe. Make sure all the instances

of Firefox are closed and then right-click the “SigPlusExtLite.exe” installer, and choose

“Run as Administrator”. Then, follow the steps in the installer.



www.topazsystems.com/Software/SigPlusExtLiteBSB.exe. Make sure all the

instances of Firefox are closed and then right-click the “SigPlusExtLiteBSB.exe”

installer, and choose “Run as Administrator”. Then, follow the steps in the installer.

3. Start the Firefox browser to complete the installation of the Firefox Extension. The

browser prompts the user to allow the extension installation. Check the “Allow this

installation” option and click the “Continue” button to complete the installation.





Note:

• Step 3 on the previous page has to be performed for all the Windows log-in accounts by

logging into Windows and starting the Firefox browser.

• In some cases, the Firefox browser may not show the prompt mentioned in step 3 on

the previous page; in those cases the extension has to be manually enabled from the

Firefox Add-ons manager page by typing in about:addons in the address bar, then going

to the Extensions section, and clicking the “Enable” button next to ”Topaz

SigPlusExtLite Extension”. Finally, restart your browser.



launch Firefox and navigate to the following page:


Click the “Sign” button, and the signing window will appear. Sign on your signature pad. To






3.3 – Opera

Using SigPlusExtLite in Opera requires two steps. First, SigPlusExtLite must be installed.

Then, the SigPlusExtLite extension must be set up for Opera. Opera supports installation of

Chrome Extensions, and SigPlusExtLite leverages the Chrome Extension to capture

signatures.






www.topazsystems.com/Software/SigPlusExtLite.exe. Right-click the





www.topazsystems.com/Software/SigPlusExtLiteBSB.exe. Right-click the



3.3.2 – Install the Topaz SigPlusExtLite Opera Extension

1. Start the Opera Browser.

2. Go to the Opera Add-ons page and install the “Download Chrome Extension” Add-on by

navigating to the URL: https://addons.opera.com/en/extensions/details/download-

chrome-extension-9/?display=en.



https://addons.opera.com/en/extensions/details/download-chrome-extension-9/?display=en

https://addons.opera.com/en/extensions/details/download-chrome-extension-9/?display=en



3. In the opened page, click the “+ Add to Opera” button displayed on the top right of the

page. After installation, to view the installed extension, type Ctrl+Shift+E.

4. Go to the Topaz “SigPlusExtLite” Background Extension page on the Chrome web store

by navigating to the URL:

https:/chrome.google.com/webstore/detail/Topaz-SigPlusExtLite-

back/dhcpobccjkdnmibckgpejmbpmpembgco.

5. In the opened page, click on the “+ ADD TO OPERA” button displayed on the top right

of the page.

6. Click “OK” in the Installation Confirmation dialog, as shown below.

7. Go to the Extension Manager (Ctrl+Shift+E) and click the “Install” button to install and

enable the Extension.







launch Opera and navigate to the following page:








3.4 – Microsoft Edge

With the current restrictions on providing extensions through the Microsoft Store, the Edge

extension has to be installed offline.






www.topazsystems.com/Software/SigPlusExtLite.exe. Right-click the





www.topazsystems.com/Software/SigPlusExtLiteBSB.exe. Right-click the







3.4.2 – Certificate Installation

Before installing the extension, you must install the certificate provided with the SigPlusExtLite

Microsoft Edge package.

1. Download and extract the SigPlusExtLite Microsoft Edge package:

www.topazsystems.com/software/SigPlusExtLite_Edge.zip.

2. Double click the “TopazSigPlusExtLite.cer” file, found in the above .zip file.

3. Click the “Install Certificate” button in the Certificate window.

https://www.topazsystems.com/software/SigPlusExtLite_Edge.zip



4. Select “Local Machine” and click the “Next” button to continue.

5. Select “Place all certificates in the following store” and click the “Browse” button to

select the certificate store. Select “Trusted Root Certification Authorities” from the list

and click the “OK” button.



6. After selecting the “Trusted Root Certification Authorities” from the list, click the “Next”

button.

7. Click the “Finish” button to complete the Certificate Import Wizard.



8. The following popup message will be displayed. Click the “OK” button to complete the

installation. Click the “OK” button in the Certificate window to close it.

3.4.3 – Package Installation

1. Double click the package TopazSigPlusExtLite_1.0.0.0_x86_x64_arm.appxbundle

to start the installation (found in the .zip file downloaded in Step 1 on page 11); then,

click the “Install” button.



2. Once the installation is complete, you should see the message saying the extension is

ready, as shown below. Close the window; you shouldn’t click the “Launch” button.

Note: If you see the error message “Topaz SigPlus EDGE Extension installation failed”,

follow the instructions in Section 3.4.4, then return to this point.

3. Open the Edge browser to view the installed extension.

Note: When you open or restart the browser, you may have to enable the extension.

Also, the extension may take a few moments to initially be visible.



3.4.4 – Sideloading

Only follow these instructions if you receive the failure message described in Step 2 on page

15. If not, continue with Section 3.4.5 below.

1. Type “Settings” in the Windows Search Box in the left bottom corner of Windows

taskbar and press the “Enter” button on the keyboard. The following “Windows Settings”

window will be displayed. Click the “Update & Security” setting option to display the

Windows Update” page.



2. In the “Windows Update” page, click the “For developers” setting option.

3. Select the “Sideload apps” option and close the Settings window.



4. The following message will be displayed. Click Yes to turn on app sideloading.

5. Run the “TopazSigPlusExtLite_1.0.0.0_x86_x64_arm.appxbundle” package to install

the application properly for Edge browser.


After the SigPlusExtLite software is installed and the signature pad is connected to the client

PC, launch the Edge browser and navigate to the following page:






download links & installation guide - electronic signature … · · 2018-01-053.0 –...

Documents