download catalog - prorail manufacturing

PRORAILMANUFACTURING™

2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938

Email: [email protected]: www.prorailmfg.com

Dean WieserPresident

John J. HumphreyVice President

Revised 1/05


SWITCH POINT ROLLER

FEATUR

• Open frame c• Carrying han• Adjustable ti• Spring loaded• Full contact f• All hardware• Pre-lubricate

bushings.• Works on ma• Installs on an• Works on an• Easy installat

MODEL SA6Patent No. 5, 501, 418

ES & SPECIFICATIONS

onstruction. • No drilling of rail during assembly.dle. • Maintenance free.

e-bar. • Low cost. adjustable roller cage. • Shipped fully assembled in a box.

riction secured rail base clamp. • Weight - 82 lbs. each set (2 per set). is zinc plated, grade five.d rollers with oil impregnated

• Help reduce back injuries.nual and power switches. • Help reduce wear on turnouts.y size turnout. • Lower maintenance costs.

y size rail. • Eliminate graphiting plates.ion and removal. • Decrease amperage.


Email: [email protected] • Website: www.prorailmfg.com

BENEFITS

SIGN POST HOLDERMODEL SS3



• Carrying Handle• Fins to Prevent Rotation• High Impact/Replaceable Driver• Sign Pins Included• Pinned Post Base• Flag Mounts• Overall Length 36”• Weight: 15 lbs.

FEATURES & SPECIFICATIONS

* Flag & Post Not Included


Katrina Martin

FLAT BAR SIGN STANDMODEL FB9

* 3/8” Pin With Head Used With Mini Flags

FEATURES & SPECIFICATIONS• Carrying Handle

• High Impact Replaceable Driver

• 3/8” thru Holes For Mounting Flag(11” and 16” Centers)

• 3/8” Pins with Heads(11” Centers)

• Easy Driving

• Overall Length: 51”

• Weight: 17 lbs.




FEATURES &

SPECIFICATIONS

Remove Twist At Rail Joint During

Welding

Specializing At Joints Near Frogs

And Switches

Move Head Of Rail While Keeping

The Base Stationary

Can Be Used By One Person

From Alignment To Start Of Weld

Is Only Minutes

Can Be Used On Any Size Rail

Carrying Handle

One Piece Design

Weight 18 lbs.

RAIL JOINT ALIGNMENT TOOL MODEL PeeWee

2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022

Ph: 712-243-5411 • Fax: 712-243-3938



TIE PLUG DRIVERMODEL PD52

• Hand Grip

• 5/8” Square Hardened Driver

• Hand Protector Eliminates Pinch Point

• Internal Impact Resister Eliminates Distoration

• Overall Length: 58”

• Weight: 10 lbs.




SPECIALTY TIE PLATES


• Tie Plate Can Be Made To Your Specifications

• Can Be Made To Use On Any Tie (Concrete, Steel or Wood)

• Can Be Made With Cants

• Are Used With Weld On Shoulders




• Zinc plated hardware included

• High quality exterior gray paint and prime

• Reflective tape for visibility

• Easy 3 step assembly instructions


• Easy storage and removal

• Holds eight rail heater covers,one switch heater cover andfour center covers

• Locking capabilities

• Base is mounted in ground for stability

HEATER COVER STORAGE RACKMODEL: FR8-A4CC

Patent No. 6,571,963 B2




Rack shown with no covers Rack shown with covers

Drift pin not included

• Absorbs impact of driving device

• Provides a large flat striking surface

• Increases life of drift pin

• Eliminates shrapnel for safety

• Lab tested for durability

• Can be installed on new or used drift pins

• Can be custom designed for special applications



DRIFT PIN STRIKING PADMODEL: DV10

Patent No. 6,854,945



• 7500# capacity

• Deck size 6’ x 8’

• 16” wheels

• Roller bearing stub axle

• All welded steel construction

OPTIONS:

• Customer specifications or specialapplications can be quoted

• Tow bar

• 3 axle carts


RAIL CARTMODEL RC75





PORTABLE TURNOUTPatent Pending



• Includes one Ramp and eight Panels

• 20’ long Panels

• Each Panel Weighs Approximately 3,000#

• Uses 90# Rail with Joint Bars

• Leveling Jacks on Panels Locatedover Main Line Rail

• Pick Up Points on All Panels and Ramp

• Left Hand or Right Hand Installation

• Chain Sling Provided

OPTIONS:

• Outriggers for Support

• Panels for Portable Spur



SELF-DRIVING SIGN STANDMODEL SD20



FEATURES & SPECIFICATIONS• Handles for Easy Driving

• High Impact Replaceable Striking Pad

• 3/8” thru Holes for Mounting Flag(16” Centers)

• 3/8” Pins with Head(16” Center for Mini Flags)

• Fins to Prevent Rotation

• Tab Lock Style Double Wire Pin

• Extendable Flag Tube Overall Length100” Extended, 78” Retracted

• Weight 21 lbs.

download catalog - prorail manufacturing

Documents