dosing systems for swimming pools - altheas piscines · 2012. 1. 19. · 2 water & industry...

DOSING SYSTEMS FORSWIMMING POOLS

innovation > technology > future

2 water & industry > dosing systems for swimming pools

Dosing systems forSwimming pools

The quality of the water from a health, aesthetic,

and safety point of view is the main characteristic

in dealing with swimming pools. Seko has made

automatic systems for all needs and applications -

private, semi-public, and public swimming pools.

The automatic systems make it possible to analyse

the water and to suitably pilot dosing units to

maintain optimum water quality. The ease with

which the unit is calibrated and set protects the

work done by both installer and end user, in order

to provide a service that fully complies with all

relevant laws.

Our wide range of measuring and dosing systems

provides a wide range of solutions in terms of

type of measurement, dosing methods, and full

compatibility with the widest range of products

used for treating pool water.

Seko offers its services, acting as a partner that is

capable of designing and developing the solution

that best meets your needs for all swimming pool

applications.

innovation > technology > future 3

indexDomesticpoolbasic EVO 4

Single pH 5Single Redox 5Double pH/Redox 5

kontrol invikta 6

Single pH or Redox 6Double pH/Redox 6

kontol panel 02 - pH 7

Pool plus kontrol 40 (pH/Redox) 8

TmDigit Timed 9

Professionalkontrol panels (with Amperometric Cell) 10

PC (pH/Chlorine) 10PR (pH/Redox) 11CL (Chlorine) 11PRC (pH/Redox/Chlorine) 12PC-Cond (pH/Chlorine/Conductivity) 12DPR (pH/Redox) 13

teknaEVO TPR (pH/Redox) 13

kontrol panles (with Potentiostatic cell) 14pH-CL/p 14pH-Redox-CL/p 14

CL-Sensor probes 15

photometer systems (pH/Chlorine DPD/Redox/Temp.) 16

hand held measuring instruments 18

measure instruments 21kontrol 40 (pH/Redox/Conductivity) 21kontrol 500 (pH/Redox/Chlorine/O2/Turbidity/Conductivity) 21

probes and accessories 22

dosing unit and accessories 24invikta 24 dynamik time 24peristaltic pump 25 tekna EVO 25spring series 25 kompact AXL-DPG 26filters 26 stirrers 27tanks 27 suction plungers 27


seko group has developed a simple and reliable system made up of anindustrial container that houses the dosing pumps and instruments thusmaking installation and maintenance easy. Application of peristaltictechnology - low noise output, easy to use, low maintenance, protectionagainst siphoning phenomena, avoidance of direct contact with chemicalproducts.

poolbasic EVO

General features

• Level probe input

• Flow sensor input

• Flow signal input (at 230 V voltage for connection to

circulation pump)

• PT100 temperature sensor input (optional sensor)

• Relay control for indicating when the dosing pump is

working (230 V contacts)

• End product level alarm

• Pump on “HOLD” for calibration or alarm status

• OFA (Over Feed Alarm) on the dosing cycle

Plastic containerwith IP 65 protection level

LED Display(pH and Redox version)

DIGITAL Display(Double version)

Transaxle TechnologyProvides added support and stability to the gear shaft. This equalizes rollerpressure, extending the life of the motor gearbox and squeeze tube.

Protectionagainst unauthorised interference

Electrodeself-calibrating and quality control

Immediate set-point reading

Simply and fastSet Point programming and regulation

Power Supply230 Vac (115 Vac upon request)

Automatic proportional dosing


Pool Basic Evo pH • • • • • •

Pool Basic Evo Redox • • • • • •

Pool Basic Evo Double • • • • • • • •

InstallationKit

pH Redox

690 750480

510540

570600

630660 720 A

660690

720750

780810

840 900 B870 930

� Flow Rate1.5 lt/h o 5 lt/h

� Backpressure1.5 bar

� pH measuring scale setting0...14

� Redox measuring scale setting0...1000 mV

� Flow Rate 1.5 lt/h o 5 lt/h

� Backpressure 1.5 bar

� Redox measuring scale setting (A and B)

� Flow Rate 1.5 lt/h o 5 lt/h

� Backpressure 1.5 bar

� pH measuring scale setting 6.2 ... 8.0

Double (ph/Redox)


kontrolinvikta

It is an easy to use dosing system composed of a control instrument and a solenoid dosing pump.

This system is the right solution to control pH or Redox (ORP) in those applications were isrequired to dose up to 5 bars pressure.

kontrol invikta double

kontrol invikta single

Installation Kit

• User-friendly display and keyboard interface for easy programming

• Password protection for programming menu

• Relay ouput for remote alarm

• FWM (Frequency Width Modulation) proportional dosing

Technical specificationsPower supply 50/60 Hz 100÷240 VAC

Consumption 12 W or 18 W

Pump flow rate 5 lt/h

Maximum back-pressure 5 bar

pH range 0 ÷ 14.0 pH

Redox range 0 ÷ +1000 mV

Reading precision ± 0,1 pH; ± 10 mV

Accuracy ±0,02 pH; ± 3 mV

Electrode calibration Automatic


kontrolpanel O2

Kontrol pH-Ox (O2) is the seko solution to Swimming pool Water Treatment withactive Oxigen.

The system incorporates the measurement and the dosing all in one small dimensions panel,supplied with all accessories for an easy, safe and fast installation.

The Oxygen control is done with theOX500 control instrument (andrelated oxygen sensor) that drives asolenoid dosing pump Invikta

series rated 5 lt/h at 5 bar to dosehydrogen peroxide.

Typical dissolved oxygen value for acorrect desinfection is 15ppm.

The pH is controlled by aPR40 control instrument(with related pH probe) thatdrives a solenoid dosing pumpInvikta series rated 5 lt/h at5 bar to dose an acid chemical.Technical specifications

Power supply 50/60 Hz 100÷240 VAC

Consumption 60 W

Pump flow rate 5 lt/h

Maximum back-pressure 5 bar

pH range 0 ÷ 14.0 pH

Oxygen range 0 ÷ 20.0 ppm

Reading precision ± 0,1 pH; ± 0,1 ppm

Accuracy ±0,02 pH; ± 0,1 ppm

Electrode calibration Automatic

Both instruments areequipped withfunctions forproportional dosing,electrodes qualitycontrol and easy andfast comprehensionprogramming menus.

kontrol40 pH0 ÷ 14.0 pH

kontrol500 pH0 ÷ 20.0 ppm

invikta5 lt/h 5 bar probe holder


The POOL PLUS range is made up of three differ-ent systems, designed and built with particularattention being given to needs expressed byclients, and able to measure and control pH andRedox levels under any operating condition.

Pool Plus

pH measurement scale 0...14.00 pH

Redox measurement scale 0...1500 mV

Alarm kit standard

Direct connection of pumps

0/4…20 mA outputfor transmitting measurements

POOL PLUS

pH measurement scale 0...14.00 pH

Redox measurement scale 0...1500 mV

Alarm kit opzionale

Direct connection of pumps

Manual calibration of instruments

Pump pause for level or flow alarm

POOL PLUS P

• Simple to install.

• Plastic container with degree of protection IP 55

• Electrical connections on internal terminal board

• Power supply 230 Vac 115 Vac (upon request) at50 - 60 Hz

• Switch to pause pump

• Main switch for the system

• Remote alarm cut-out switch (only with alarm kit)

• LCD display

• pH-20 instrument for measuring and controllingthe pH

• MV-20 instrument for measuring and controllingRedox

• Precision multi-turn regulation trimmer

• Two programmable set points (pump and alarmsetting)

Pool Plus

Pool Plus P

Main switch for thesystem

LCD measurementdisplay

Visual alarm

Installation kit

Built-in dosing system, easy to maintain


The TM series of dosing systems use simple analogue or digital programmers to provide effective, economical timed dosing of

chemical products.

TmDigit

Power supply: 230 Vac (115 Vac upon request)

Power rating: 5 W

Overall dimensions: 155 x 213 x 110 mm

0,4 lt/h - 1,5 ba

• IP 55 Protection level

• Simplicity of installation, use and maintenance

• Integrated Peristaltic Pump

• Digital or analogue time programmer

• Low noise output

Analogue ProgrammerThe analogue version can be used for programming dailyevents, and it is also possible to set operating time easily, usingthe internal circuit.

Digital ProgrammerUp to a maximum of 8 events can be programmed for the sys-tem for each day of the week. The programmer also makes itpossible to activate the dosing pump manually or to deactivateits activation.

Digital orAnalogue timer

systemEasy Maintenance of Peristaltic Pump Simplicity of installation

The kontrol series of panels are compact and easy to use and include all the accessories required for immediate installation (buffer

solutions for calibrating pH and Rx, and DPD colour system for Chlorine calibration).

kontrol panels with Amperometric Cell

• Self-calibration of all measurements

• Compact probe holders, complete with flow sensor,flow rate regulating valve and tap for bleeding theliquid.

• Alarm signal to indicate that the water is notflowing,

• Instruments with IP 65 protection level.

• Alarm relay (5 A – 250 Vac)

• 4÷20 mA outputs for each parameter measured, withprovision for selecting the interval

• Power supply 230 Vac (standard) or 115 Vac (upon

request)

• Programmable set points and alarm

• Pump pause function during calibration

• Temperature reading and temperature offset

(automatic with optional PT100 probe)

• Adjustments on set point: On/Off, pause/run,

proportional by impulse

kontrol PC

(pH/Free Chlorine)Panel for measuring and setting the pH value and Chlorineconcentration.

PC95 Instrument - pH 0 ÷ 14.0 / Chlorine 0 ÷ 5.0 ppm

Self-cleaning (Pt-Cu) amperometric cell

Self-calibration in relation to the physical-chemicalcharacteristics of the water to be measure

pH probe

Self-calibration with quality control of the probe

Solenoid valve to shut off the flow of water for self-calibration

Mechanical filter at water intake

Available upon request the version for high conductivity(example water of sea)

Compactplumbing

Visibleelectronic box

Easyto assemble



kontrol PR

(pH/Redox)Panel for measuring and setting the pH value and Redoxpotential (ORP).

PR95 Instrument - pH 0 ÷ 14.0 / Redox 0 ÷ 1000 mV

Redox (ORP) probe

pH probe

Self-calibration with quality control of the probe


Compactplumbing


Easyto assemble

kontrol CL

(Free Chlorine)Panel for measuring and setting the Chlorine concentration.

CL95 Instrument - Chlorine 0 ÷ 5.0 ppm


Self-calibration in relation to the physical-chemicalcharacteristics of the water to be measured

Solenoid valve to shut off the flow of water for self-calibration.

Compactplumbing


Easyto assemble

Compactplumbing


Easyto assemble

kontrol PC-Cond

(pH/Chlorine/Conductivity)Panel for measuring and setting the pH value, conductivity (mS)and Chlorine concentration


CD75 Instrument - Conductivity 0 ÷ 20000 µS



pH probe

K1 conductivity probe

Compactplumbing


Easyto assemble


kontrol PRC(pH/Redox/Free Chlorine)Panel for measuring and setting the pH value, Redox potential(ORP), and Chlorine concentration.


PR75 Instrument - Redox 0 ÷ 1000 mV

Self-cleaning (Pt-Cu) amperometric cel


pH probe

Redox (ORP) probe

Self-calibration with quality control of the probes

Solenoid valve to shut off the flow of water for self-calibration


Digital dosing pump with pH/Redox control meterbuilt in. • Digital interface for constant or proportional

dosing, depending on the measured pH or Rxvalue

• PT100 probe input for thermal compensation

• Repetition alarm relay

• Input On-Off for remote control

• 4÷20 mA output for measure transmission

• Controller Measure single parameterpH : 0÷14,00 pH or Redox : ±1500 mV

ModelCode

20 18

2.53

1200,350,41

4 / 6 asp.4 / 7 mand.

12,0600121082

4568

160

0,420,520,630,83

4 / 6 12,2603

121051

7101518

320

0,360,520,780,94

4 / 6 23,9800

5421

20254054

300

1,111,392,22

3

8 / 12 22,2803

teknaEVO TPR

proportional dosage

CAL

ESCstartstop

PROGmodeenter

Alarm

kontrol DPR(pH/Redox)Panel for measuring and setting the pH value and Redoxpotential (ORP)

Dosing pump with built-in Tekna DPH instrumentpH 0 ÷ 14.0

Dosing pump with built-in Tekna DRX instrumentRedox ± 1500 mV

Redox probe

pH probe

Self-calibration with quality control of the probes


Probe holder complete with sensor and flow regulator

Compactplumbing


Easyto assemble


Pressure[bar]

Flow rate[lt/h]

Fequency max[stroke./min]

Stroke capacity[cc/stroke]

Ø ConnectionsIN / OUT [mm]

Consumption[W]

Pre-Assembled panel for pH, Redox and Chlorine control.

kontrol panels with Potentiostatic cell

• Self-calibration of all measurements

• Compact probe holders, complete with flow sensor,flow rate regulating valve and tap for bleeding theliquid.

• Alarm signal to indicate that the water is not flowing,

• Instruments with IP 65 protection level

• Alarm relay (5 A – 250 Vac)

• Power supply 100÷240 VAC

• 4÷20 mA outputs for each parameter measured, withprovision for selecting the interval

• Programmable set points and alarm

• Pump pause function during calibration

• Temperature reading and temperature offset(automatic with optional PT100/NTC probe)

• Adjustments on set point: On/Off, pause/run,proportional by impulse

kontrol pH-CL/p

(pH/Free Chlorine)It is composed of one PR40 for pH control and oneCL500 for chlorine control with pH probe, probe holderand connection box.

Measurement range:0÷14 pH; 0÷10 ppm Free Chlorine

kontrol pH-Redox-CL/p

(pH/Redox/Free Chlorine)It is composed two PR40, for pH and ORP control, and oneCL500, for chlorine control, pH and ORP probes, probes-holder andconnection box.

Measurement range:0÷14 pH; 0÷10 ppm Free Chlorine; 0÷1000 mV Redox

kontrol pH-Redox-CL/p

kontrol pH-CL/p



CL-Sensor probePSS-PR-CL-S probe holder

F-CL-1 F-CL-2 F-CL-3 T-CL D-CL

Measurement 0÷10 ppm 0÷10 ppm 0÷10 ppm 0÷10 ppm 0÷10 ppm

Resolution ±0.01 ppm ±0.01 ppm ±0.01 ppm ±0.01 ppm ±0.01 ppm

pH Scale 4÷8 pH 4÷12 pH 4÷11 pH 0÷14 pH 0÷14 pH

Flow(*) >=30 lt/h >=30 lt/h >=30 lt/h >=30 lt/h >=30 lt/h

Temperature 45°C 45°C 45°C 45°C 45°C

Pressure 1 Bar 0,5 Bar 0,5 Bar 0,5 Bar 1 Bar

Power supply 12÷30 Vdc 12÷30 Vdc 12÷30 Vdc 12÷30 Vdc 12÷30 Vdc

Output signal 4÷20 mA(**) 4÷20 mA(**) 4÷20 mA(**) 4÷20 mA(**) 4÷20 mA(**)

Diameter 25 mm 25 mm 25 mm 25 mm 25 mm

Length 225 mm 225 mm 225 mm 225 mm 225 mm

Body material PVC PVC PVC PVC PVC

Membrane M20 M48 M48G M48 M20

Electrolyte ECL1 ECC1 ECS1/Gel ECP1/Gel ECD4

Cable Max. 15 meters Max. 15 meters Max. 15 meters Max. 15 meters Max. 15 meters

Treatment Free chlorine Organic free chlorine Free chlorine Total Chlorine Chlorine Dioxidetype Inorganic (Chloroisocyanurate) Inorganic (Inorganic or Organic)

(*) Stabilization time average 15 minutes, maximum 1 hour (**) Output of current signal proportional to the measurement

CL-Sensor ProbeThis range consists of potentiostatic amperometric probes to measure free or total chlorine forapplications such as: water treatment, swimming pools, industrial applications and more.

The wide range of probes allows a better choice depending on the parameter to be tested, thus obtaininga more accurate measurement.

• The two-wire interface allows quick and easy installation

• Calibration of the probe is guided by the kontrol CL500 instrument


photometersystemMulti-Parameter Control Unit for contemporarydetermination of Free Chlorine (PhotometricSystem), pH, Redox and Temperature.

The system is equipped with a graphic displaysubdivided into areas for simultaneous display ofall available measurements.

The removable cover guarantees the accessibilityof the system and also allows:

� Protection of the chemical reagents fromultraviolet rays

� High visibility display

� IP65 container protects from humid environments

� Multilanguage user-friendly interface. The wide displayallows the creation of graphics for each available measurement viaan internal Data Logger function.

� Mechanics with “flipdoor” permitting easyaccess to the electricalconnections

� BNC connectors on side of boxfacilitate quick maintenance ofthe pH and Redox probes

The peristaltic pump, whichhas 4 pressure points, saveson reagents

Continous monitoring ofreagents using level probes

The DPD reagent in powderform (to be diluted beforeuse) is an excellent solutionfor safe storage


Technical FeaturesFree or Total Chlorine Measurement 0÷ 5 ppm Resolution 0,01 ppm Precision 1% FS

pH Measurement 0÷14 pH Resolution 0,01 pH Precision 1% FS

Redox Measurement ±1500 mV Resolution 1 mV Precision 1% FS

Temperature Measurement 0÷50 °C (32 ÷ 106 °F) Resolution 0.1°C (.18 °F) Precision 1% FS

Display 240x128 pixel backlit graphic

Programming Via keypad with 4 bubble keys

Digital Input Dry contact for disabling dosages

Analogue Input 0/4÷20 mA for auxiliary measurements

Power supply 90÷264Vac 50-60Hz 66 Watt

Internal Data Logger Flash Memory 16000 records Recording interval 00:00 ÷ 99:99 minutesType circular / refill Tabular / graphic display

4 Analogue Outputs Size Chlorine, pH, Redox, TemperatureType 0/4÷20 mA galvanically isolatedLower / upper / inversion limit programming Maximum load 500 Ohms

4 Set Point Relay Outputs nr. 2 for chlorine measurement + nr. 2 for pH measurement Max. relay load 3A (resistive) 230Vac

Alarm Relay Output Lack of sample waterReagents run outFloodlight burned outDirty cell Relay max. resistive load 3A at 230Vac

2 Auxiliary Relay Outputs Programmable as Set Points for Redox measurement, Set Points for Temperaturemeasurement, Timed activation for cell cleaningRelay max. resistive load 3A at 230Vac

Serial Port Output (RS485) RTU MODBUS protocol with programmable Baud rate 1200 ÷ 38400

� Hydraulics with outlet of water containing reagents forchlorine measurement. This allows a considerable reduction inthe quantity of water used for the measurement. The water usedfor checking the pH and Redox can be channelled towards thebuffer tank, while only the water polluted by the DPD reagents willbe drained off and managed separately in accordance with localregulations

� Installation time reduced due to quick-coupling connectionsfor sampling and outlet pipes

� The unit has self-calibration for optical unit and ensures a highaccurancy of Chlorine measurement precision using a 520nm sensor and light source emitted by a LED

Probe holder

Clean water inlet

Special Outlet forwaste water withDPD reagent

Clean wateroutlet

Available version Total Chlorine + Temperature

Free Chlorine + Temperature

Free Chlorine+ pH + Temperature

Free Chlorine + pH + Redox + Temperature


PO-TPocket instrument which allows a rapid and trustablemeasurement. Supplied with crash proof box with probeincluded.

These easy to use, extremely practical instruments are the latest generation of hand heldinstruments.

Practical waterproofsupport

Batteries easy toreplace

Sensor easy to replace

Tester

PO-T Rx Redox range : 0 ÷ 1999 mV

PO-T Rx Waterproof Redox range : 0 ÷ 1999 mV

PO-T pH pH range : 0 ÷ 14,00 pH

PO-T pH Waterproof pH range : 0 ÷ 14,00 pH

PO-T pH Waterproofwith replaceable probe pH range : 0 ÷ 14,00 pH

PO-T CD2 Conductivity range : 0 ÷ 2 mS

PO-T CD2 Waterproof Conductivity range : 0 ÷ 2 mS

PO-T CD2 Waterproofwith replaceable probe Conductivity range : 0 ÷ 2 mS

PO-T CD20 Conductivity range : 0 ÷ 20 mS

PO-T CD20 Waterproof Conductivity range : 0 ÷ 20 mS

PO-T CD20 Waterproofwith replaceable probe Conductivity range : 0 ÷ 20 mS

Waterproof

Standard

pH-Temp Tester Large, double reading, LCD display.

Temperature measurement range:0-50°C or 32,0-122,0°F(accuracy 0,5°C or 0.9°F).

Measurements from -1.00 to 15,00 pH(accuracy ±00,1 pH)

ORP Tester (Redox)Measurements from–999 mV to 1000 mV(accuracy ± 2 mV).

Cond Tester Doble conductivity measurements rangefrom 0 to 1990 µS/cm (accuracy ± 1% of full scale)from 0 to 19.90 mS/cm (accuracy ± 1% of full scale)

Battery lifespan: more than 150 hours

pH TesterMeasurements from -1.00 to 15,00 pH(accuracy ±00,1 pH)

• Large LCD display

• Sensor and batteries easy to replace

• Easy to use

• Impermeable to water

• Self switch-off after 8,5 minutes

• Battery charge indicator

• Battery lifespan: more than 500 hours

• Operation temperature: 0 to 50 °C

• Measurement from –1,0 to 15,0 pH(accuracy ± 0,1 pH)


- pH measurements from 0,00 to 14,00 (accuracy ±00,1 pH)- Redox measurement ± 1000 mV (accuracy ± 2 mV). - Temperature measurement from 0,0 to 100 °C (accuracy ± 0,5 °C)- Automatic / manual temperature offset (0 – 100°C).

pH-ORP6 Series- Measurements 0-20.00, 200.0, 2000 mS/cm (accuracy ± 1% of full scale)- Measurements 0-20.00, 200.0 mS/cm (accuracy ± 1% of full scale)- Temperature measurement from –10,0 to 110,0 °C (accuracy ± 0,5 °C)- Automatic / manual temperature offset (0 – 50°C).

Con6 Series

- Measurements 0 – 10,00, 10.0 – 100,0, 100 – 1000 ppm (accuracy ± 1% of full scale) - Measurements 1,00 – 10,00, 10,0 – 100,0, 100 – 200 ppt (accuracy ± 1% of full scale)- Temperature measurement from – 10,0 to 110,0 °C (accuracy ± 0,5 °C)- Automatic / manual temperature offset (0 – 50°C).

Ox6 Series- pH simulation values 1.00, 1.68, 4.01, 6.86, 7.00, 9.18, 10.01, 12.45

(accuracy ± 0,02 pH)- Redox simulation values –1800, -900, -390, +390, +900, +1800 mV

(accuracy ±1 mV)- Operation temperature: 0 to 40 °C

pH-Redox signal simulator

Series 6

Practicalcontainer

Protectivecasing

Waterproofkeyboard


- Measurement of the concentration of free Cl, total Cl, cyanic acid, and pH

- Impermeable to water

- Free and total Cl measurements: 0 – 1,99 and 2,0 – 6,0 ppm (accuracy ± 00,2or ± 0,2 ppm)

- Cyanic acid measurement 5 – 90 ppm (accuracy ± 4 ppm)

- pH measurement 5,9 – 8,2 (accuracy 0,1 pH)

- Operation temperature: 0 to 50 °C

- Battery charge indicator

- Battery type “AAA” (x4).

- Battery lifespan: more than 3000 tests

C401 Portable Photometric Measuring Instrument

- Impermeable to water

- Self-selection of measuring interval 0,01 – 19,99, 20,0 – 99,9, 100 – 1000 NTU(accuracy ± 2% of the reading)

- Operation temperature: 0 to 50 °C

- Battery charge indicator

- Battery type “AAA” (x4).

- Battery lifespan: more than 1200 tests

- Light lifespan: more than 1,000,000 tests

T101 portable turbidity measuring devices

Chlorine from 0,1 to 5.00 mg/ltpH from 6.8 to 8.4Bromine from 0,1 to 9.9 mg/ltAlkalinity from 10 to 500 mg/ltCyanuric Acid from 0 to 200 mg/lt

Power Supply 1 x PP3 Battery (not included)

Size : 17.5 x 7.5 x 4.5 cm

Weight : 132 gr

SP163 Cool Pooltester Cl/pH/Alk

SP164 Cool Pooltester Cl/pH/Cyn

SP165 Cool Pooltester Cl/pH/Br

SP166 Cool Pooltester Br/pH/Alk

AR 165/1 Refil for Cl/pH/Alk

AR 165/2 Refil for Cl/pH/Cyn

AR 165/3 Refil for Cl/pH/Br

AR 165/4 Refil for Br/pH/Alk

PT 164 Box of 5 sapres test tubes

Cool Pooltester Portable Photometric Measuring Instrument

PracticalcontainerWaterproof

keyboard

Batterieseasy toreplace


Wall-mounting version with IP65degree protection (144x144x90 mm)

kontrol40• Multilinguage menu

• Password protectionof menu setting

• Relay status indicator

• Manual control of all instrumentfunctions

• Measurement probes quality control

• OFA (Over Feed Alarm): timed excessdosage alarm

• Alarm band can be set with min. andmax. values

• Proportional dosing through Set Points

• Galvanic isolation for output 4 to20 mA

• Power supply 100÷240 Vac

kontrol PR40Range 0÷14 pH or ±1500 mV

kontrol CD40Range 0÷50000 µS

DIN Rail Version (6 EN50022 modules)

Panel-mounting version(48x96x100 mm) Panel-mounting version

(96x96x92 mm)

kontrol500

Wall - or pole-mounting version withIP65 degree protection (144x144 mm)

Panel-mounting version (96x96 mm)

• Graphic Display128x64 pixel

• PID control functions

• Serial communication portby RS485

• Quality probes ofmeasurement probes

• Power supply 100÷240 Vac

kontrolPR500Range 0÷14 pH or ±1500 mV

kontrolCD500Range 0÷20000 µS

kontrolCL500Range 0÷20 ppm Free Chlorine

kontrolOX500Range 0÷20 ppm Oxygen

kontrolTB500Range 0÷100 FTU / NTU [Turbidity]

Mounted on a pole with abracket and shelter(accessories)


PT-100 temperature sensor

PT-100-V 0- 100 °C 2 Bar Glass casing 12 mm Ø length 120 mm 3-core cable 5 m long

PT-100-NUT 0- 100 °C 6 Bar PVC casing 1/2 gas 2-core cable 1 m long

PROBES

pHSPH-1-S-6 0... 14 pH 50 µS 60 °C 7 bar 1 Standard GEL Cable 6m+BNC Standard Ø 12 Epoxy 12x120

SPH-1-S-1,5 0... 14 pH 50 µS 60 °C 7 bar 1 Standard GEL Cable 1,5m+BNC Standard Ø 12 Epoxy 12x120

SPH-3-WW 2... 14 pH 5 µS 80 °C 6 bar Open hole GEL S7 PG 13,5 Glass 12x120

RedoxSRH-1PT 6 ±2000 mV - 60 °C 7 bar 1 Standard GEL Cable 6m+BNC Standard Ø 12 Epoxy 12x120

SRH-1PT 1,5 ±2000 mV - 60 °C 7 bar 1 Standard GEL Cable 1,5m+BNC Standard Ø 12 Epoxy 12x120

SRH-3-PT ±1000 mV - 80 °C 6 bar Open hole GEL S7 PG 13,5 Glass 12x120

Elec

trod

ety

pe

Mea

sure

men

tra

nge

Min

imum

cond

uctiv

ity

Max

imum

tem

pera

ture

Max

.pr

essu

re

Poro

us

sept

um

Refe

renc

e

Conn

ectio

n

Proc

ess

asse

m-

bly

Casi

ng

AISI 304 ElectrodeElimination of parasitic currents. Mechanical connection Standard Ø 12 mm

pH Redox

PT-100-V PT-100-NUT

Standard Boot BNC

Standard Boot BNC


Model Value Quantity

KIT ST 4-7 pH, 465 mV 20 °C 90 ml

ST-PH-4 4,00 pH 20 °C 250 ml

ST-PH-7 7,00 pH 20 °C 250 ml

ST-RX-465 465 mV 25 °C 250 ml

BUFFER SOLUTIONS

CABLES

ELECTRODE HOLDER

Cables for connecting electrodes to the S7 head

CE-5-B screened cable with S7 and BNC soldered connectors, 5 m long

CE-10-B screened cable with S7 and BNC soldered connectors, 10 m long

Model Description N° Electrodes Temp. max Maximum Time

PSS 7 - SIngle transparent glass 1 40 °C 6 bar

PSS 7 transparent glass 3 40 °C 6 bar

Model Description Max. Temperature Max. pressure Process connection Electrode connection

PSS 3 PVC 60 °C 7 bar 1/2” G.M. Ø 12 mm

PSS-PG PVC 60 °C 7 bar 1/2” G.M. P.G. 13,5 mm

PSS7PSS7Single PSS3 PSS PG

KIT

250 ml


GeneralFeatures

Power Supply100÷240 Vac

External trigger24÷240 Vac

Digital Display

Priming (MOM), Run (ON),Stand-by (OFF) modeselectable by switch

Flow rate 4, 2 and 1 lt/h @ 1,5 Bar (selectable byprogramming menu)

invikta It is made up of a simple, reliable, electromagnetic dosing pump, based on amicroprocessor.

The outer PP plasticcontainer has an IP65protection level andprotects the unit fromwater spray and canwithstand aggressiveenvironments

Wall mounting: • directly on the

wall• fixing bracket kit

Pump casingwith manual

priming valve

Standard power supply90÷265 Vac(20÷90 Vac upon request)

The pump has an input forthe level probe

Manual regulation of theflow rate from 0 (pumpstopped) to 100% ofmaximum flow rate

Operating status LED: • Flashes when the pump is

operating• Flashes slowly when the

pump is stopped• Flashes quickly when a

level alarm is activated

dynamik time Peristaltic pump with timed dosing by external trigger.

Adjustableflow rate anddosing timeby keyboard

IP65 Enclosure

Wall mountingbracket

TransaxleTechnology

Easy and safeinlet-outlet tubingconnection

External triggerinput

Power supply100÷240 Vac

Switch for Priming, Runand Stand-by modeselection


Peristaltic pump technology means low maintenance, lownoise output, and that no valves are used at all.

MODELS:PE-1,5.1,5 1,5 lt/h (constant flow rate) at 1,5 max

PE-1,5.05 5 lt/h (constant flow rate) at 1,5 max

PR4 4 lt/h (adjustable flow rate) at 1,5 bar

SPRING Series

Electromechanical Dosing Pumps

Dosing pumps with spring return mechanism. Version with plunging piston or mechanical membrane.

MODELS:Serie PS1:max flow rate 304 lt/h max pressure 20 barSerie PS2max flow rate 1000 lt/h max pressure 20 barSerie MS1max flow rate 460 lt/h max pressure 10 barSerie MS0max flow rate 47 lt/h max pressure 5 bar

tekna EVOSolenoid Dosing Pumps

• 4 models that cover 1 to 60 lt/h with an output pressure upto 20 Bar

• Full chemical compatibility

• Reduced maintenance

• Dosing performance always stable

• Version available:

- Analogue and digital interface.

- Constant Flow Rate with timer control or adjustable by knob

- Proportional Flow Rate according to an external analogue ordigital pulse signal

- Many additional functions

PERISTALTIC Pump


Panels with 2 dosing pumps and electric wiring box, particular-ly suitable for installing with Kontrol series panels.

KOMPACT AXL-DPG

Housings and filter cartridgesHOUSINGS FOR FILTER CARTRIDGES MINOR 5” SERIESOperating conditionsMaximum pressure: 8 barMinimum temperature: 2 °CMaximum temperature: 40 °C

CharacteristicsNon-toxic materialsHead: Loaded polypropyleneIN/OUT threaded inserts: BrassCup: SAN and White loaded polypropyleneO-Ring: NBRFlow rate: 120 lt/minLifetime test: 200,000 cycles from 0 to 10 bar

FILTER CARTRIDGES RLN SERIESAverage lifetime: Variable, maximum 24 monthsMaintenance: Wash every 3 monthsOperating conditionsMaximum temperature: 40 °C

CharacteristicsNon-toxic materialsFiltering material: Nylon (polyamide)External support: PolypropyleneCaps: PolypropyleneSeals: EPDM

FILTERS

Easyto assemble

Compatiblewith chemicalproducts

Easyto assemble

PUMPPUMPPUMPPUMPPUMPPUMP

CLCLCL PHPHPH SUPPLYSUPPLYSUPPLY

POWERPOWERPOWERALARMALARMALARM

FF FF

NN NN

RELE'RELE'RELE' RELE'RELE'RELE'

Kompact AXL- N° 2 Tekna AXL analogue dosing pumps

for continuous operation (available in602 or 902 versions)

- Electric wiring box

mAmAmAmAmAmA

FREQ.FREQ.FREQ.

INPUT PUMP 1INPUT PUMP 1INPUT PUMP 1

--++

POWERPOWERPOWER

SUPPLYSUPPLYSUPPLYINPUT PUMP 2INPUT PUMP 2INPUT PUMP 2

++

mAmAmA

++-- FREQ.FREQ.FREQ. mAmAmA

++

-- ++ ++--

Kompact DPG- N° 2 Tekna DPG digital dosing pumps

for proportional operation (availablein 602 or 902 versions)

- Electric wiring box


Electrical stirrers with three-phase motor (single-phase upon request), and fixing flange. Specifically made for fitting on SER series tanks.Materials in contact with the liquid:non-toxic PVC or AISI 316. Speed:1400 or 70 rpm.

Slow 70 rpm • Fast 1400 rpm

600 mm

800 mm

900 mm

1100 mm

Specifically designed for assembling along with bothelectromechanical and electromagnetic dosing unitswith stirrers and dosing pumps. Made using a centrifugalpurpose, the mechanical strength of these tanks isguaranteed. Made of food-grade polyethylene, thesetanks are compatible with almost all chemical productsused in dosing systems.

TANKS

Designed and built for easy, immediate use, they

ensure regular operation of the..They are all fitted with

foot filter and are available inversions that have built-

in level probe to indicate when the chemical product is

finished in order to prevent vacuum dosing that would

damage the pump.

SUCTION PLUNGERS

STIRRERS

Model Height (cm) Diameter (cm)50 45,5 40

100 64 46

250 87 59.5

300 95 67

500 118,5 76

1000 122 108,5

Heights (mm) Model tanks450 Ser50

650 Ser100

900 Ser250

1050 Ser300

1250 Ser500/1000

www.seko.com

SEKO Asia Pacific SINGAPORE • SEKO China CHINA • SEKO do Brasil BRAZIL • SEKO DosingSystems USA • SEKO Deutschland GERMANY • SEKO France FRANCE • SEKO Iberica SPAINSEKO Italia ITALY • OOO SEKO RUSSIA • SEKO Northern Europe DENMARK • SEKO SIETAROMANIA • SEKO Southern Africa SOUTH AFRICA • SEKO UK UNITED KINGDOM

BRO SWPUK 081The technical data may be modified without notice. The drawings and images are only indicative

dosing systems for swimming pools - altheas piscines · 2012. 1. 19. · 2 water & industry...

Documents