door handles and locks - residential€¦ · this is an inoperable handle set on both sides of the...

DOOR HANDLES ANDLOCKS - RESIDENTIAL

https://HardwareShowroom.com

Hafele Authorized eReseller : 1(888)-800-7780


Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm

Inches are approximate

www.hafele.comAH 2.2

2 Brittanium and Bronze Collections

Accessories

Door Handles and Locks - ResidentialContents

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.3

Door Preparation . . . . . . . . . . . . . . . . . . . . . . . . 2.4-2.5

Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.6

Ovale

– Lever Sets with Rose . . . . . . . . . . . . . . . . . . . . . . .2.7

– Entry Lock Sets . . . . . . . . . . . . . . . . . . . . . . . . . . .2.8

Gotica

– Lever Sets with Rose . . . . . . . . . . . . . . . . . . . . . . .2.9

– Entry Lock Sets . . . . . . . . . . . . . . . . . . . . . . . . . .2.10

Conchiglia

– Lever Sets with Rose . . . . . . . . . . . . . . . . . . . . . .2.11

– Entry Lock Sets . . . . . . . . . . . . . . . . . . . . . . . . . .2.12

Tubular Latch and Plates. . . . . . . . . . . . . . . . . . . . .2.18

Tubular Deadbolt and Plates . . . . . . . . . . . . . . . . . .2.19

Bushings, Spindle and Backplates . . . . . . . . . . . . .2.20

Torciglia

– Lever Sets with Rose . . . . . . . . . . . . . . . . . . . . . .2.13

– Entry Lock Sets . . . . . . . . . . . . . . . . . . . . . . . . . .2.14

Escutcheons

– Type 3 – Giglio . . . . . . . . . . . . . . . . . . . . . . . . . . .2.15

– Type 2 – Ovale . . . . . . . . . . . . . . . . . . . . . . . . . . .2.15

Pull Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.16

Deadbolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.17

Faceplate and Strike Plates . . . . . . . . . . . . . . . . . . .2.21

Mortise and Rim Cylinders. . . . . . . . . . . . . . . . . . . .2.21

Mortise Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.22




http://www.hafele.com

Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm


www.hafele.com AH 2.3

2

Door Handles and Locks - ResidentialBritannium and Bronze Collections

GlossaryActive DoorThis is the primary door in a pair of doors and has an operable handle set.

PassageThis is a non-locking set on either side.(typically used on doors that do not require security or privacy)

PrivacyThis is a locking set operated by a push button from the insideof the door and can be released with an emergency key from theexterior side of the door (typically used for bathroom and bedroom doors)

Inactive DoorThis is the secondary door in a pair of doors and has an inoperablehandle set. (dummy)

Dummy (single)This is an inoperable handle on one side of the door. (typically used for closet doors)

Dummy (double and full)This is an inoperable handle set on both sides of the door for use on pair of double doors.

BacksetThis is the measurement from the edge of the door to the center ofthe backplate (or hole in the door) Backset is either 2 3/8” or 2 3/4”.

Door ThicknessDoor hardware will fit doors of 1 3/8”, 1 3/4 ” and 2” thick. Thicker doors are to be specifically stated when ordering.

LatchThis is a spring latching mechanism operated by the handles.Häfele offers its latches in 2 3/8” and 2 3/4” backset.

Dead BoltThis is a locking mechanism that is separate from the latching system. A dead bolt can be locked by a key or a turnpiece.

CylinderThis is the portion of the lock where the key is inserted to lock or

unlock the set.

KeyingThis is the system of cutting keys. Häfele offers “key alike” for its cylinders.

HandingMost of the lever sets require you to determine whether the door is right hand or left hand. (knobs do not require handing)





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


T/2

T

Install flushwith jamb

3" 64

1.2 3" 64

1.2

1"25.4

1"25.4

2 1" 8

54

2 1" 4

57.2

1 5" 8

41.3

60

2 3" 8

70

2 3" 4

or

1" 8

3.2

7" 64

(2) 2.5

7" 64

(2) 2.5

7" 8

22

1 1" 2

382 1"

8

54

1 1" 8

28.6

70

2 3" 4

(2) R 11 7" 16

3" 32

2.4

5" 8

16

Passage and Privacy Set

Thumb Turn & Deadbolt Door prep:

Strike prep:

Door prep:

Strike prep:

Dummy, mounted to backplate Door prep: none

Lever Sets - Door Preparation

7" 64

(2) 2.5

7� 8

22

1 1� 2

382 1�

8

54

1 1� 8

28.6

70

2 3� 4

(2) R 11 7� 16

7" 64

2.5

1 �1� �8

28.6


1" 16

1.4

3" 64

��

1"25.4

2 1" 8

54

T/2

T

1"25.4

2 1" 4

57.2

1 5" 8

41.3

7" 64

(2) 2.5

60

2 3"

8

70

2 3"

4

or

1"

8

3.2

B a c k s e t





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


T

T/2

60

2 3"

8

70

2 3"

4

or

Not to be used for fire rated openings

Not to be used for fire rated openings



Door prep:

Strike prep:

1"25.4 2 1"

8

54

5 1" 2

139.7

5 1" 2

139.7

1"(2) 25.4

2 1" 4

57

2 1" 4

57

1 5" 8

41

1 5" 8

41

7" 64

(4) 2.8

7" 64

(2) 2.5

7" 64

(2) 2.5

1" 8

3

1 1" 8

28.6 7" 8

22

7" 8

22

1 1" 2

38

1 1" 2

38

2 1" 8

54

2 1" 8

54

1 1" 8

28.6

70

2 3" 4

70

2 3" 4

(2) R 11 7" 16

(2) R 11 7" 16

3" 64

1.2

3" 64

1.2

3" 64

1.2

1" 16

1.4

5" 8

16

1 1" 8

28.6

2 1"

2

64 70

2 3"

4

or

T/2

T

27

1 1"

16

1"

16

2

7"

8

23

3"

4

19

32

1 1"

4

86

3 3"

8

124

4 7"

8

89

3 1"

2

2 1"

4

57

3"

4

19

5"

8

Ø16

5"

8

Ø16

3"

16

5

70

2 3"

4

2 1"

2

64

3"

16

5

100

315"

16

2415"

1632

1 1"

4

49

115"

16

87

3 7"

16 147.6

513"

16

8"

203.2

2 x Ø3

2 1"

4

57

Ø32

1 1"

4

5"

8

Ø16

5"

8

Ø16

5"

8

Ø16

87

37"

16

Entry Lock Sets – Door Preparation

Passage and Privacy Set, mortise lock

Thumb turn side Cylinder side

Entry Lock Set, latch and deadbolt

Door prep:

Strike prep:





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


Lever Sets – Materials

Door Handing

Silicone Bronze is composed of copper and zinc and its surface is

extremely resistant to wear and corrosion. This classic material is

commonly used for creating fine hardware and statues. A brown

patina is added to the exposed Bronze surface, which makes the

hardware appear to have a “living finish”.

Britannium is a silvery solid base metal similar in characteristics

to Pewter, but it is harder. It is composed of tin, antimony, copper,

zinc and silver. The use of Britannium goes back to the middle ages

where it was used to produce sword handles. Today Britannium

is widely used for the manufacture of tableware as well as the

production of the well-known Oscar statues. The material is not

lacquered and this “living finish” actually increases its charm with

wear.

Häfele’s Britannium and Bronze Collections are available in two distinct materials, which adds elegance and style

to any home décor. These authentic handcrafted lever designs, inspired by classic European architectural styles,

are hand-cast in either solid Silicone Bronze or Britannium.

Handing of door is always determined from the outside.

Left Hand Outside Right Hand

Left Hand Reversed Outside Right Hand Reversed





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


• With star rose• Passage set includes levers, roses with interlocking backplates, spindle with spindle clip, latch, face plate, strike plate, dust cap and mounting screws• Privacy set also includes a pin and a pin extension

Material: Britannium or Bronze

Trim Type Function Door Thickness Face Plate Backset Britannium natural Bronze aged

Passage Set F7535 + 45

(1 3/8” + 1 3/4”)

Square 60 (2 3/8”) 911.73.899 911.73.891

Corners 70 (2 3/4”) 911.73.909 911.73.901

Privacy Set F7635 + 45

(1 3/8” + 1 3/4”)

Square 60 (2 3/8”) 911.73.919 911.73.911

Corners 70 (2 3/4”) 911.73.929 911.73.921

Dummy Door Trim, Pair

Dummy35 + 45

(1 3/8” + 1 3/4”)– – 911.73.939 911.73.931

Dummy RH, single

Dummy – – – 911.73.959 911.73.951

Dummy LH, single

Dummy – – – 911.73.949 911.73.941

• With round rose• Passage set includes levers, roses with interlocking backplates, spindle with spindle clip, latch, face plate, strike plate, dust cap and mounting screws• Privacy set also includes a pin and a pin extension




(1 3/8” + 1 3/4”)

Square 60 (2 3/8”) 911.73.829 911.73.821

Corners 70 (2 3/4”) 911.73.839 911.73.831


(1 3/8” + 1 3/4”)

Square 60 (2 3/8”) 911.73.849 911.73.841

Corners 70 (2 3/4”) 911.73.859 911.73.851


Dummy35 + 45

(1 3/8” + 1 3/4”)– – 911.73.869 911.73.861

Dummy RH, single

Dummy – – – 911.73.889 911.73.881

Dummy LH, single

Dummy – – – 911.73.879 911.73.871

63(2 1/2")

127(5")

Ø65(2 9/16")

18(11/16")

63(2 1/2")

127(5")

Ø65(2 9/16")

16(5/8")

Privacy Set RH Shown

Lever Sets – Ovale

NoteRoses are sized to fit standard pre-drilled doorsFor additional door prep details, refer to pages 2.4–2.5






Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


Entry Lock Sets – Ovale

250(9 7/8")

223(8 13/16")

140(5 1/2")

52.5(2 1/16")

45.9(1 13/16")

114(4 1/2")

20(13/16")

127(5")

45.9(1 13/16")

21.7(7/8")

65(2 9/16")

ExteriorInterior

250(9 7/8")

223(8 13/16")

89(3 1/2")

104.5(4 1/8")

45.9(1 13/16")

114(4 1/2")

20(13/16")

127(5")

46(1 13/16")

21.7(7/8")

65(2 9/16")

ExteriorInterior

NoteFor additional door prep details, refer to pages 2.4–2.5

Entry Lock Set RH Shown

• With mortise lock• Set includes levers, escutcheons, mortise lock, faceplate, strike plate, dust cap, cylinder (Schlage C-keyway) with 2 keys and mounting screws



Entry lock set,Right hand

F20 45 (1 3/4”)SquareCorners

64 (2 1/2”) 911.73.979 911.73.971

70 (2 3/4”) 911.73.999 911.73.991

Entry lock set,Left hand


64 (2 1/2”) 911.73.969 911.73.961

70 (2 3/4”) 911.73.989 911.73.981

• With latch and deadbolt • Set includes levers, escutcheons, mortise lock, faceplate, strike plate, dust cap, cylinder (Schlage C-keyway) with 2 keys and mounting screws





60 (2 3/8”) 911.74.019 911.74.011

70 (2 3/4”) 911.74.039 911.74.031



60 (2 3/8”) 911.74.009 911.74.001

70 (2 3/4”) 911.74.029 911.74.021





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


Lever Sets – Gotica


65(2 9/16")

49(1 15/16")

16(5/8")

140.8(5 9/16")

Ø65(2 9/16")


65(2 9/16")

49(1 15/16")

16(5/8")

140.8(5 9/16")

Ø65(2 9/16") Privacy Set RH Shown





(1 3/8” + 1 3/4”)

Square 60 (2 3/8”) 911.74.049 911.74.041

Corners 70 (2 3/4”) 911.74.059 911.74.051


(1 3/8” + 1 3/4”)

Square 60 (2 3/8”) 911.74.069 911.74.061

Corners 70 (2 3/4”) 911.74.079 911.74.071


Dummy35 + 45

(1 3/8” + 1 3/4”)– – 911.74.089 911.74.081

Dummy RH, single

Dummy – – – 911.74.109 911.74.101

Dummy LH, single

Dummy – – – 911.74.099 911.74.091

• With star rose• Passage set includes levers, roses with interlocking backplates, spindle with spindle clip, latch, face plate, strike plate, dust cap and mounting screws• Privacy set also includes a pin and a pin extension




(1 3/8” + 1 3/4”)

Square 60 (2 3/8”) 911.74.119 911.74.111

Corners 70 (2 3/4”) 911.74.129 911.74.121


(1 3/8” + 1 3/4”)

Square 60 (2 3/8”) 911.74.139 911.74.131

Corners 70 (2 3/4”) 911.74.149 911.74.141


Dummy35 + 45

(1 3/8” + 1 3/4”)– – 911.74.159 911.74.151

Dummy RH, single

Dummy – – – 911.74.179 911.74.171

Dummy LH, single

Dummy – – – 911.74.169 911.74.161





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2







64 (2 1/2”) 911.74.199 911.74.191

70 (2 3/4”) 911.74.219 911.74.211



64 (2 1/2”) 911.74.189 911.74.181

70 (2 3/4”) 911.74.209 911.74.201

• With latch and deadbolt• Set includes levers, escutcheons, latch, face plate, strike plate, dust cap, deadbolt, cylinder (Schlage C-keyway) with 2 keys and mounting screws





60 (2 3/8”) 911.74.239 911.74.231

70 (2 3/4”) 911.74.259 911.74.251



60 (2 3/8”) 911.74.229 911.74.221

70 (2 3/4”) 911.74.249 911.74.241

Entry Lock Sets – Gotica



104.5(4 1/8")

49(1 15/16")

Interior

21.7(7/8")

65(2 9/16")

250(9 7/8")

223(8 13/16")

89(3 1/2")

49.3(1 15/16")

141(5 9/16")

127(5")

Exterior

20(13/16")

135(5 5/16")

52.5(2 1/16")

49(1 15/16")

Interior

21.7(7/8")

65(2 9/16")

223(8 13/16")

250(9 7/8") 140

(5 1/2")

49.3(1 15/16")

141(5 9/16")

127(5")

Exterior

20(13/16")





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2



Note• Roses are sized to fit standard pre-drilled doors• For additional door prep details, refer to pages 2.4–2.5

Lever Sets – Conchiglia





(1 3/8” + 1 3/4”)SquareCorners

60 (2 3/8”) 911.74.269 911.74.261

70 (2 3/4”) 911.74.279 911.74.271


(1 3/8” + 1 3/4”)SquareCorners

60 (2 3/8”) 911.74.289 911.74.281

70 (2 3/4”) 911.74.299 911.74.291


Dummy35 + 45

(1 3/8” + 1 3/4”)– – 911.74.309 911.74.301

Dummy RH, single

Dummy – – – 911.74.329 911.74.321

Dummy LH, single

Dummy – – – 911.74.319 911.74.311

65(2 9/16")

47(1 7/8")

119.5(4 11/16")

117(4 5/8")

18(11/16")

Ø65(2 9/16")





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


• With mortise lock • Set includes levers, escutcheons, mortise lock, faceplate, strike plate, dust cap, cylinder (Schlage C-keyway) with 2 keys and mounting screws





64 (2 1/2”) 911.74.349 911.74.341

70 (2 3/4”) 911.74.369 911.74.361



64 (2 1/2”) 911.74.339 911.74.331

70 (2 3/4”) 911.74.359 911.74.351

• With latch and deadbolt• Set includes levers, escutcheons, latch, face plate, strike plate, dust cap, deadbolt, cylinder (Schlage C-keyway) with 2 keys and mounting screws





60 (2 3/8”) 911.74.389 911.74.381

70 (2 3/4”) 911.74.409 911.74.401



60 (2 3/8”) 911.74.379 911.74.371

70 (2 3/4”) 911.74.399 911.74.391

Entry Lock Sets – Conchiglia

ExteriorInterior

7" 8

21.7

45.6

113" 16

45.6

113" 16

4 1" 8

104.5

65

2 9" 16

9 7" 8

250

223

813" 16

13" 16

20

4 5" 8

117

119

411" 16

3 1" 2

89

ExteriorInterior

7"

8

21.7

119

411"

16

4 5"

8

117

44.7

1 3"

4

52

2 1"

16

45.2

113"

16

5 1"

2

1409 7"

8

250

223

813"

16

13"

16

20

65

2 9"

16

135

5 5"

16







Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


Lever Sets – Torciglia

64(2 1/2")

125(4 15/16")

18(11/16")

Ø65(2 9/16")

Privacy Set RH Shown• With round rose• Passage set includes levers, roses with interlocking backplates, spindle with spindle clip, latch, face plate, strike plate, dust cap and mounting screws• Privacy set also includes a pin and a pin extension




(1 3/8” + 1 3/4”)

Square 60 (2 3/8”) 911.74.419 911.74.411

Corners 70 (2 3/4”) 911.74.429 911.74.421


(1 3/8” + 1 3/4”)

Square 60 (2 3/8”) 911.74.439 911.74.431

Corners 70 (2 3/4”) 911.74.449 911.74.441


Dummy35 + 45

(1 3/8” + 1 3/4”)– – 911.74.459 911.74.451

Dummy RH, single

Dummy – – – 911.74.479 911.74.471

Dummy LH, single

Dummy – – – 911.74.469 911.74.461






Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


Entry Lock Sets – Torciglia



• With latch and deadbolt • Set includes levers, escutcheons, latch, face plate, strike plate, dust cap, deadbolt, cylinder (Schlage C-keyway) with 2 keys and mounting screws





60 (2 3/8”) 911.74.539 911.74.531

70 (2 3/4”) 911.74.559 911.74.551



60 (2 3/8”) 911.74.529 911.74.521

70 (2 3/4”) 911.74.549 911.74.541






64 (2 1/2”) 911.74.499 911.74.491

70 (2 3/4”) 911.74.519 911.74.511



64 (2 1/2”) 911.74.489 911.74.481

70 (2 3/4”) 911.74.509 911.74.501

44.7(1 3/4")

21.7(7/8")

68(2 11/16")

Interior

247(9 3/4")

223(8 13/16")

89(3 1/2")

45.2(1 13/16")

114(4 1/2")

20(13/16")

125(4 15/16")

Exterior

51(2")

21.7(7/8")

44.7(1 3/4")

68(2 11/16")

Interior

247(9 3/4")

223(8 13/16")

140(5 1/2")

44.7(1 3/4")

114( 4 1/2")

20(13/16")

125(4 15/16")

Exterior





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


246(9 11/16")

222.5(8 3/4")

48(1 7/8")

13(1/2")

11(7/16")

290(11 7/16")

199(7 13/16")

43(1 11/16")

12.5(1/2")

14.5(9/16")

NoteCustom order items must be ordered through a Technical Sales Specialist, please call 1-888-437-7477.

Escutcheon Type P3 - Giglio


Item No.

custom order

Escutcheon Type P2 - Ovale


Item No.

custom order

Escutcheons

• Suitable only for non-pre-drilled doors• Can be used with any lever from the Britannium and Bronze Collections





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


Pull Handles

226(8 7/8")

255(10 1/16")

32(1 1/4")

63(2 1/2")

Door

Drill holeØ13 mm

(1/2")

Drill holeØ15 mm(9/16")

Door

Surfacemounted

Door

260(10 1/4")

77(3 1/16")

323(12 3/4")

LH RH

Pull Handle


Finish Item No.

natural britannium 901.01.909

aged bronze 901.01.901

Pull Handle


Finish Left hand Right hand

natural britannium 901.01.809 901.01.819

aged bronze 901.01.801 901.01.811

Fastener Sets

• For wood and glass applications

Material: Brass

Description Item No.

Back to back, for door thickness8–57 (5/16”–2 1/4”)

909.79.540

One-sided, for door thickness 8–57 (5/16”–2 1/4”), with cover cap, chrome-plated

909.79.552

One-sided, for door thickness 8–57 (5/16”–2 1/4”), with cover cap, bronze-plated

909.79.551





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


Deadbolts

Doorthickness

16(5/8") 65

(2 9/16")30

(1 3/16")

6.5(1/4")

Exterior Interior

Backset

• With engraved knob• Set includes tubular deadbolt, rim cylinder keyed for Schlage C-Keyway, 2 keys, rose with thumb-turn, rose for cylinder and 2 mounting screws



Deadbolt E015235 – 57

(1 3/8” – 2 1/4”)SquareCorners

60 (2 3/8”) 911.71.159 911.71.161

70 (2 3/4”) 911.71.169 911.71.151

• With plain knob• Set includes tubular deadbolt, rim cylinder keyed for Schlage C-Keyway, 2 keys, rose with thumb-turn, rose for cylinder and 2 mounting screws



Deadbolt E015235 – 57

(1 3/8” – 2 1/4”)SquareCorners

60 (2 3/8”) 911.71.199 911.71.191

70 (2 3/4”) 911.71.209 911.71.201

16(5/8") 65

(2 9/16")

Exterior

30(1 3/16")

6.5(1/4")

Interior

Doorthickness

B a c k s e t





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


Accessories

28(1 1/8")

70(2 3/4")

54(2 1/8")

1.2(1/16")

38(1 1/2")

70(2 3/4")

54(2 1/8")

28(1 1/8")

15 (5/8")

33(1 5/16")

25(1")

1.25(1/16")

41(1 5/8")

57(2 1/4")

18(11/16")

20

(13/1

6")

25(1")

25(1") 2

0(1

3/1

6")

2(1/16")

12

(1/2

")

57

(2 1

/4")

Backset

87.1 (3 7/16")

Tubular Latch

• Passage and privacy• Reversible latch bolt for left and right handed doors• Hub rotation 28º, 8 mm square drive• Passage latch includes latch with faceplate, strike, dustcap and screws • Privacy latch also includes a pin and a pin extension

Material: Latch body: zinc die-cast Latch bolt: extruded, brass

Function BacksetUS15*Satin,

Nickel-plated

US10B**Satin,

Bronze-plated oil-rubbed

Passage, F7560 (2 3/8”) 911.23.250 911.23.251

70 (2 3/4”) 911.23.252 911.23.253

Privacy, F7660 (2 3/8”) 911.23.260 911.23.261

70 (2 3/4”) 911.23.262 911.23.263

Note

*for use with natural britannium**for use with aged bronze

Latch Faceplate

Material: Brass

Finish Item No.

US15* satin, nickel-plated 911.39.716

US10B** satin, bronze-plated oil-rubbed 911.39.711

Strike Plate

Material: Brass

Finish Item No.



Dustcap

• To tubular latch

Material: Plastic

Color Item No.

black 911.39.684

Mounting Screws

• Strike plates and faceplates, countersunk head #8 x 3/4” (4.0 x 19 mm)

Material: Brass

Finish Item No.

nickel-plated 909.79.566

bronze-plated oil-rubbed 909.79.561





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


Accessories

1.3(1/16")

2.0(1/16")

28.6(1 1/8")

26.9(1 1/16")

70(2 3/4")

54(2 1/8")

70(2 3/4")

54(2 1/8")

28(1 1/8")

26(1 1/16")

33(1 5/16")

25.6(1")

16.2(5/8")

1.2(1/16")

2.8(1/8")

57.2(2 1/4")

41(1 5/8")

19(3/4")

25(1")

Ø7.4(5/16")

8.3 (5/16")

7.0(1/4")

Backset

83(3 1/4")

22(7/8")

1.2(1/16")

21.7(7/8")

25(1")

1 (1/16")

Tubular Deadblot

Material: Latch body: Zinc die-cast Latch bolt: Brass, extruded

Function BacksetUS15*Satin,

Nickel-plated

US10B**Satin,

Bronze-plated oil-rubbed

E015260 (2 3/8”) 911.22.446 911.22.441

70 (2 3/4”) 911.22.456 911.22.451

Note


Deadbolt Faceplate

Material: Brass

Finish Item No.



Strike Plate

Material: Brass

Finish Item No.



Dustcap

• To tubular deadbolt

Material: Plastic

Color Item No.

black 911.39.683

Mounting Screws

• Strike plates and faceplates, countersunk head #8 x 3/4” (4.0 x 19 mm)

Material: Brass

Finish Item No.


bronze-plated oil-rubbed 909.79.561





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


Accessories

Bushing

Material: Plastic

Color/Finish Item No.

white 909.79.577

bronze-finished 909.79.571

Set Screw and Hex Key

3 mm

Material: Steel

Finish Item No.

zinc-plated 909.79.589

Supplied With2 set screwsHex key

Spindle

8 mm diameter, 110 mm long

Door thickness Function Item No.

35 - 45 (1 3/8” – 1 3/4”)Passage, F75 909.79.505

Privacy, F76 909.79.506

Spindle Clip

• Used wiith passage and privacy spindles

Material: Steel

Finish Item No.

zinc-plated 909.79.507

Dummy Backplate

Material: Steel

Finish Item No.

zinc dichromate 911.73.812

Interlocking Backplate Assembly

• With spring-loaded return mechanism

Material: Zinc die-cast

Door thickness Item No.

35 - 45 (1 3/8” – 1 3/4”) 911.73.813

Mounting Screws

• For interlocking backplate• Countersunk machine screw M4 x 40 mm

Material: Steel

Finish Item No.


Set Supplied With2 pieces





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


Accessories

25.5(1")

14(9/16")

76(3")

203(8")

159(6 1/4")

32(1 1/4")

1.6(1/16")

47.3(1 7/8")

32(1 1/4")

105(4 1/8")

124(4 7/8")

9(3/8")

6.5(1/4")

16.1(5/8")

19(3/4")

2.1(1/16")

Note

*for use with natural britannium** for use with aged bronze

20(13/16")

35(1 3/8")

4.5(3/16")

32(1 1/4")

35(1 3/8")

4.5(3/16")

Faceplate

Material: Brass

Finish Item No.



Supplied With2 machine screws

Strike Plate

Material: Brass

Finish/Color Item No.



Supplied WithDustcap2 screws

Mortise Cylinder

• 5-pin Schlage C-keyway

Material: Solid Brass

Finish Item No.



Supplied With2 keys

Rim Cylinder

• For deadbolt• 5-pin Schlage C-keyway

Material: Solid Brass

Finish Item No.



Supplied With2 keys2 screws





Dim

ensi

onal

dat

a no

t bi

ndin

g. W

e re

serv

e th

e righ

t to

alte

r sp

ecifi

catio

ns w

ithou

t no

tice.

Dimensions in mm



2


203(8")

184(7 1/4")

32(1 1/4")

32(1 1/4")

32(1 1/4")

87(3 7/16")

140(5 1/2")

5.5(7/32")

25.4(1")

Backset

30(1 3/16")

Mortise Door Lock Case

Technical Data

Case: Heavy gauge steel, plated

Latch bolt: Brass, 19 mm (3/4”) throw

Deadbolt: Brass with hardened steel insert,

25 mm (1”) throw

Lever hub: 8 mm (5/16”)

Thumbturn hub: 5 mm (3/16”)

Strike: Standard ANSI strike, 124 mm (4 7/8”)

Handing: Field-reversible

Mortise Lock

• Grade 2 lock• Pre-set for right hand applications

Material: Case: Steel, plated Latch bolt and Deadbolt: Brass

Function BacksetUS15*satin,

nickel-plated

US10B**satin,

bronze-plated oil-rubbed

F2064 (2 1/2”) 911.71.176 911.71.171

70 (2 3/4”) 911.71.186 911.71.181

Supplied WithCaseFaceplateStrikeDustcap4 mounting screws 2 machine screws

Note






901.01.801 . . . . . . . . . . . . . . . . . 2.16

901.01.809 . . . . . . . . . . . . . . . . . 2.16

901.01.811 . . . . . . . . . . . . . . . . . 2.16

901.01.819 . . . . . . . . . . . . . . . . . 2.16

901.01.901 . . . . . . . . . . . . . . . . . 2.16

901.01.909 . . . . . . . . . . . . . . . . . 2.16

909.79.505 . . . . . . . . . . . . . . . . . 2.20

909.79.506 . . . . . . . . . . . . . . . . . 2.20

909.79.507 . . . . . . . . . . . . . . . . . 2.20

909.79.540 . . . . . . . . . . . . . . . . . 2.16

909.79.551 . . . . . . . . . . . . . . . . . 2.16

909.79.552 . . . . . . . . . . . . . . . . . 2.16

909.79.561 . . . . . . . . . . . . .2.18, 2.19

909.79.566 . . . . . . . . . . . . .2.18, 2.19

909.79.571 . . . . . . . . . . . . . . . . . 2.20

909.79.577 . . . . . . . . . . . . . . . . . 2.20

909.79.589 . . . . . . . . . . . . . . . . . 2.20

911.22.441 . . . . . . . . . . . . . . . . . 2.19

911.22.446 . . . . . . . . . . . . . . . . . 2.19

911.22.451 . . . . . . . . . . . . . . . . . 2.19

911.22.456 . . . . . . . . . . . . . . . . . 2.19

911.23.250 . . . . . . . . . . . . . . . . . 2.18

911.23.251 . . . . . . . . . . . . . . . . . 2.18

911.23.252 . . . . . . . . . . . . . . . . . 2.18

911.23.253 . . . . . . . . . . . . . . . . . 2.18

911.23.260 . . . . . . . . . . . . . . . . . 2.18

911.23.261 . . . . . . . . . . . . . . . . . 2.18

911.23.262 . . . . . . . . . . . . . . . . . 2.18

911.23.263 . . . . . . . . . . . . . . . . . 2.18

911.39.683 . . . . . . . . . . . . . . . . . 2.19

911.39.684 . . . . . . . . . . . . . . . . . 2.18

911.39.691 . . . . . . . . . . . . . . . . . 2.19

911.39.696 . . . . . . . . . . . . . . . . . 2.19

911.39.701 . . . . . . . . . . . . . . . . . 2.19

911.39.706 . . . . . . . . . . . . . . . . . 2.19

911.39.711 . . . . . . . . . . . . . . . . . 2.18

911.39.716 . . . . . . . . . . . . . . . . . 2.18

911.39.721 . . . . . . . . . . . . . . . . . 2.18

911.39.726 . . . . . . . . . . . . . . . . . 2.18

911.39.731 . . . . . . . . . . . . . . . . . 2.21

911.39.736 . . . . . . . . . . . . . . . . . 2.21

911.39.741 . . . . . . . . . . . . . . . . . 2.21

911.39.746 . . . . . . . . . . . . . . . . . 2.21

911.71.151 . . . . . . . . . . . . . . . . . 2.17

911.71.159 . . . . . . . . . . . . . . . . . 2.17

911.71.161 . . . . . . . . . . . . . . . . . 2.17

911.71.169 . . . . . . . . . . . . . . . . . 2.17

911.71.171 . . . . . . . . . . . . . . . . . 2.22

911.71.176 . . . . . . . . . . . . . . . . . 2.22

911.71.181 . . . . . . . . . . . . . . . . . 2.22

911.71.186 . . . . . . . . . . . . . . . . . 2.22

911.71.191 . . . . . . . . . . . . . . . . . 2.17

911.71.199 . . . . . . . . . . . . . . . . . 2.17

911.71.201 . . . . . . . . . . . . . . . . . 2.17

911.71.209 . . . . . . . . . . . . . . . . . 2.17

911.73.812 . . . . . . . . . . . . . . . . . 2.20

911.73.813 . . . . . . . . . . . . . . . . . 2.20

911.73.814 . . . . . . . . . . . . . . . . . 2.20

911.73.821 . . . . . . . . . . . . . . . . . . 2.7

911.73.829 . . . . . . . . . . . . . . . . . . 2.7

911.73.831 . . . . . . . . . . . . . . . . . . 2.7

911.73.839 . . . . . . . . . . . . . . . . . . 2.7

911.73.841 . . . . . . . . . . . . . . . . . . 2.7

911.73.849 . . . . . . . . . . . . . . . . . . 2.7

911.73.851 . . . . . . . . . . . . . . . . . . 2.7

911.73.859 . . . . . . . . . . . . . . . . . . 2.7

911.73.861 . . . . . . . . . . . . . . . . . . 2.7

911.73.869 . . . . . . . . . . . . . . . . . . 2.7

911.73.871 . . . . . . . . . . . . . . . . . . 2.7

911.73.879 . . . . . . . . . . . . . . . . . . 2.7

911.73.881 . . . . . . . . . . . . . . . . . . 2.7

911.73.889 . . . . . . . . . . . . . . . . . . 2.7

911.73.891 . . . . . . . . . . . . . . . . . . 2.7

911.73.899 . . . . . . . . . . . . . . . . . . 2.7

911.73.901 . . . . . . . . . . . . . . . . . . 2.7

911.73.909 . . . . . . . . . . . . . . . . . . 2.7

911.73.911 . . . . . . . . . . . . . . . . . . 2.7

911.73.919 . . . . . . . . . . . . . . . . . . 2.7

911.73.921 . . . . . . . . . . . . . . . . . . 2.7

911.73.929 . . . . . . . . . . . . . . . . . . 2.7

911.73.931 . . . . . . . . . . . . . . . . . . 2.7

911.73.939 . . . . . . . . . . . . . . . . . . 2.7

911.73.941 . . . . . . . . . . . . . . . . . . 2.7

911.73.949 . . . . . . . . . . . . . . . . . . 2.7

911.73.951 . . . . . . . . . . . . . . . . . . 2.7

911.73.959 . . . . . . . . . . . . . . . . . . 2.7

911.73.961 . . . . . . . . . . . . . . . . . . 2.8

911.73.969 . . . . . . . . . . . . . . . . . . 2.8

911.73.971 . . . . . . . . . . . . . . . . . . 2.8

911.73.979 . . . . . . . . . . . . . . . . . . 2.8

911.73.981 . . . . . . . . . . . . . . . . . . 2.8

911.73.989 . . . . . . . . . . . . . . . . . . 2.8

911.73.991 . . . . . . . . . . . . . . . . . . 2.8

911.73.999 . . . . . . . . . . . . . . . . . . 2.8

911.74.001 . . . . . . . . . . . . . . . . . . 2.8

911.74.009 . . . . . . . . . . . . . . . . . . 2.8

911.74.011 . . . . . . . . . . . . . . . . . . 2.8

911.74.019 . . . . . . . . . . . . . . . . . . 2.8

911.74.021 . . . . . . . . . . . . . . . . . . 2.8

911.74.029 . . . . . . . . . . . . . . . . . . 2.8

911.74.031 . . . . . . . . . . . . . . . . . . 2.8

911.74.039 . . . . . . . . . . . . . . . . . . 2.8

911.74.041 . . . . . . . . . . . . . . . . . . 2.9

911.74.049 . . . . . . . . . . . . . . . . . . 2.9

911.74.051 . . . . . . . . . . . . . . . . . . 2.9

911.74.059 . . . . . . . . . . . . . . . . . . 2.9

911.74.061 . . . . . . . . . . . . . . . . . . 2.9

911.74.069 . . . . . . . . . . . . . . . . . . 2.9

911.74.071 . . . . . . . . . . . . . . . . . . 2.9

911.74.079 . . . . . . . . . . . . . . . . . . 2.9

911.74.081 . . . . . . . . . . . . . . . . . . 2.9

911.74.089 . . . . . . . . . . . . . . . . . . 2.9

911.74.091 . . . . . . . . . . . . . . . . . . 2.9

911.74.099 . . . . . . . . . . . . . . . . . . 2.9

911.74.101 . . . . . . . . . . . . . . . . . . 2.9

911.74.109 . . . . . . . . . . . . . . . . . . 2.9

911.74.111 . . . . . . . . . . . . . . . . . . 2.9

911.74.119 . . . . . . . . . . . . . . . . . . 2.9

911.74.121 . . . . . . . . . . . . . . . . . . 2.9

911.74.129 . . . . . . . . . . . . . . . . . . 2.9

911.74.131 . . . . . . . . . . . . . . . . . . 2.9

911.74.139 . . . . . . . . . . . . . . . . . . 2.9

911.74.141 . . . . . . . . . . . . . . . . . . 2.9

911.74.149 . . . . . . . . . . . . . . . . . . 2.9

911.74.151 . . . . . . . . . . . . . . . . . . 2.9

911.74.159 . . . . . . . . . . . . . . . . . . 2.9

911.74.161 . . . . . . . . . . . . . . . . . . 2.9

911.74.169 . . . . . . . . . . . . . . . . . . 2.9

911.74.171 . . . . . . . . . . . . . . . . . . 2.9

911.74.179 . . . . . . . . . . . . . . . . . . 2.9

911.74.181 . . . . . . . . . . . . . . . . . 2.10

911.74.189 . . . . . . . . . . . . . . . . . 2.10

911.74.191 . . . . . . . . . . . . . . . . . 2.10

911.74.199 . . . . . . . . . . . . . . . . . 2.10

911.74.201 . . . . . . . . . . . . . . . . . 2.10

911.74.209 . . . . . . . . . . . . . . . . . 2.10

911.74.211 . . . . . . . . . . . . . . . . . 2.10

911.74.219 . . . . . . . . . . . . . . . . . 2.10

911.74.221 . . . . . . . . . . . . . . . . . 2.10

911.74.229 . . . . . . . . . . . . . . . . . 2.10

911.74.231 . . . . . . . . . . . . . . . . . 2.10

911.74.239 . . . . . . . . . . . . . . . . . 2.10

911.74.241 . . . . . . . . . . . . . . . . . 2.10

911.74.249 . . . . . . . . . . . . . . . . . 2.10

911.74.251 . . . . . . . . . . . . . . . . . 2.10

911.74.259 . . . . . . . . . . . . . . . . . 2.10

911.74.261 . . . . . . . . . . . . . . . . . 2.11

911.74.269 . . . . . . . . . . . . . . . . . 2.11

911.74.271 . . . . . . . . . . . . . . . . . 2.11

911.74.279 . . . . . . . . . . . . . . . . . 2.11

911.74.281 . . . . . . . . . . . . . . . . . 2.11

911.74.289 . . . . . . . . . . . . . . . . . 2.11

911.74.291 . . . . . . . . . . . . . . . . . 2.11

911.74.299 . . . . . . . . . . . . . . . . . 2.11

911.74.301 . . . . . . . . . . . . . . . . . 2.11

911.74.309 . . . . . . . . . . . . . . . . . 2.11

911.74.311 . . . . . . . . . . . . . . . . . 2.11

911.74.319 . . . . . . . . . . . . . . . . . 2.11

911.74.321 . . . . . . . . . . . . . . . . . 2.11

911.74.329 . . . . . . . . . . . . . . . . . 2.11

911.74.331 . . . . . . . . . . . . . . . . . 2.12

911.74.339 . . . . . . . . . . . . . . . . . 2.12

911.74.341 . . . . . . . . . . . . . . . . . 2.12

911.74.349 . . . . . . . . . . . . . . . . . 2.12

911.74.351 . . . . . . . . . . . . . . . . . 2.12

911.74.359 . . . . . . . . . . . . . . . . . 2.12

911.74.361 . . . . . . . . . . . . . . . . . 2.12

911.74.369 . . . . . . . . . . . . . . . . . 2.12

911.74.371 . . . . . . . . . . . . . . . . . 2.12

911.74.379 . . . . . . . . . . . . . . . . . 2.12

911.74.381 . . . . . . . . . . . . . . . . . 2.12

911.74.389 . . . . . . . . . . . . . . . . . 2.12

911.74.391 . . . . . . . . . . . . . . . . . 2.12

911.74.399 . . . . . . . . . . . . . . . . . 2.12

911.74.401 . . . . . . . . . . . . . . . . . 2.12

911.74.409 . . . . . . . . . . . . . . . . . 2.12

911.74.411 . . . . . . . . . . . . . . . . . 2.13

911.74.419 . . . . . . . . . . . . . . . . . 2.13

911.74.421 . . . . . . . . . . . . . . . . . 2.13

911.74.429 . . . . . . . . . . . . . . . . . 2.13

911.74.431 . . . . . . . . . . . . . . . . . 2.13

911.74.439 . . . . . . . . . . . . . . . . . 2.13

911.74.441 . . . . . . . . . . . . . . . . . 2.13

911.74.449 . . . . . . . . . . . . . . . . . 2.13

911.74.451 . . . . . . . . . . . . . . . . . 2.13

911.74.459 . . . . . . . . . . . . . . . . . 2.13

911.74.461 . . . . . . . . . . . . . . . . . 2.13

911.74.469 . . . . . . . . . . . . . . . . . 2.13

911.74.471 . . . . . . . . . . . . . . . . . 2.13

911.74.479 . . . . . . . . . . . . . . . . . 2.13

911.74.481 . . . . . . . . . . . . . . . . . 2.14

911.74.489 . . . . . . . . . . . . . . . . . 2.14

911.74.491 . . . . . . . . . . . . . . . . . 2.14

911.74.499 . . . . . . . . . . . . . . . . . 2.14

911.74.501 . . . . . . . . . . . . . . . . . 2.14

911.74.509 . . . . . . . . . . . . . . . . . 2.14

911.74.511 . . . . . . . . . . . . . . . . . 2.14

911.74.519 . . . . . . . . . . . . . . . . . 2.14

911.74.521 . . . . . . . . . . . . . . . . . 2.14

911.74.529 . . . . . . . . . . . . . . . . . 2.14

911.74.531 . . . . . . . . . . . . . . . . . 2.14

911.74.539 . . . . . . . . . . . . . . . . . 2.14

911.74.541 . . . . . . . . . . . . . . . . . 2.14

911.74.549 . . . . . . . . . . . . . . . . . 2.14

911.74.551 . . . . . . . . . . . . . . . . . 2.14

911.74.559 . . . . . . . . . . . . . . . . . 2.14

916.90.561 . . . . . . . . . . . . . . . . . 2.21

916.90.566 . . . . . . . . . . . . . . . . . 2.21

916.90.571 . . . . . . . . . . . . . . . . . 2.21

916.90.576 . . . . . . . . . . . . . . . . . 2.21

Important

This catalog is intended for exclusive

use by the recipient. No part of this

publication may be distributed in any

form to direct competitors of Häfele.

Häfele retains complete ownership of

this catalog.

Häfele reserves the right to demand

the return of this catalog in any case

where it is employed for purposes of

unfair competition.

Reproduction of this catalog, either

wholly or in part, or reprinting of any

drawing or copying of the layout, are

strictly forbidden.

The technical data and dimensions

contained in the drawings are

nonbinding and are subject to design

improvement.

Häfele accepts no liability for any

typographical or other type of error

which may occur in the production of

this catalog.

All merchandise is furnished subject to

Häfele’s official Terms and Conditions

of Sale.

January, 2015

© 2015 Häfele America Co.

All rights reserved.

Printed in USA.

n1

Item No. Page No. Item No. Page No. Item No. Page No.




door handles and locks - residential€¦ · this is an inoperable handle set on both sides of the...

Documents