paul flynn _cv2015
TRANSCRIPT
Paul Flynn CHST Field Technician
Decommissioning, Decontamination, and Demolition (DDD)
Delivering sustainable solutions in a more competitive world
Paul Flynn has more than 23years of experience in the
environmental drilling, sampling and investigation
industry and most recently over 3 years in environmental
consultancy, as a field safety officer. His primary expertise
is in CSM/DDD site safety management and the field of
environmental drilling at industrial, commercial, and
residential locations.
Mr. Flynn has worked on multiple projects for several large
clients in the manufacturing/chemical/mining and refining
sectors. He was responsible and accountable for the
management and facilitation of these projects by providing
safety oversight for on-site activities.
He has also worked on pharmaceutical sector performing
sampling and laboratory decommissioning and demolition
projects.
Certifications
CHST (Construction Health and Safety Technician Cert
# CHST-4049- BCSP)
OSHA Hazardous Waste Operations and Emergency
Response (HAZWOPER) 40- hr. training (1991)
OSHA 8- hr. HAZWOPER refresher(2015)
OSHA 30- hr. Construction Standards training (2012)
HAZWOPER 8- hr. Supervisor training
RCRA/Hazardous Waste Generator(October 2016)
Delaware Asbestos Abatement Supervisor (2015-16)
Ohio Asbestos Hazard Abatement Specialist (2015-16)
Ohio Asbestos Hazard Evaluation Specialist (2015-16)
Pennsylvania Asbestos Management Planner (October
2015)
Pennsylvania Asbestos Building Inspector(October
2015)
Transportation Worker Identification (TWIC)
ERM Subsurface Clearance EP
DOT Basic Haz Mat training
First Aid/CPR and AED certified (2015-17)
Shell Life Saving Rules (2012)
Class "A" CDL driver's license.
2015 4 P.Flynn
Fields of Competence
Construction and Demolition Operations
Remediation Operations and Systems
Confined space operations, crane lifting operations
and DOT regulations for highway vehicles
Groundwater sampling and air monitoring during
environmental remediation and demolition projects.
Subsurface Clearance processes
Well installation and development, including
monitoring, vapor, nested, production, domestic, and
geothermal wells; and reverse air, swab and pumping,
and water injection.
Hazard identification skills
Knowledge of Regulatory and Compliance Standards
Education
Millersville University, Millersville , Pennsylvania
(1986-87)
Columbia Southern University, (2015-present)
Professional Affiliations
Board of Certified Safety Professionals (BCSP)
Cert # CHST-4049
2015 3 P.Flynn
Key Projects
Americas Styrenics – Torrence CA
February 2015
Overseeing the decontamination of PCB paint following
asbestos insulation abatement by copper media blasting on
a Polystyrene Manufacturing Train. All worked performed
in containment under negative air. This was followed
immediately with complete restoration, painting,
fireproofing and reinsulating of the train to restore it to full
operation.
Alta Gas- Ferndale, WA
November 2014
Worked for a petroleum client in Ferndale Washington for
their T-1 tank inspection turnaround. Tasks included
inerting Nitrogen for Butane removal. Thermal Oxidizers
were used to burn exalted Butane. Permit required
Confined Space entry along with Working at Heights in a
Confined space required a detailed rescue plan using a
crane along with a contingency plan with the local fire
Department. All BMPs and containments were inspected
daily to maintain site run off to meet state requirements.
FMC – Newark CA
September 2014
Performed Field Safety officer duties as a third party
oversight of dismantlement and removal of all
aboveground DPE treatment system components. All assets
were separated for resale and recycling. CAL OSHA rules
and regulations were followed for EDB and appropriate
waste streams were sent for disposal.
Conoco Phillips- Atchafalaya Basin in Louisiana
March-July 2014
Worked for a key petroleum client in the Atchafalaya Basin
in Louisiana, to remove abandoned flow, lift, and return
lines coming from P&A well heads. Work included FSO
duties for oversight of hot tap and pumping procedures.
Benzene and four gas monitoring were completed for safe
operations. Crane barges along with supporting barges
were utilized to contain the seven different waste streams
that were accumulated throughout the project. Small
structural demo was also completed.
Horsehead Zinc Smelter – Monaca, PA
February – August 2014
Served as a field safety officer during decontamination and
demolition of the former zinc smelter facility in Monaca
Pennsylvania. Performed Subsurface Clearance EP duties
for Utility disconnects. Safety oversight of subcontractors
during asbestos and universal waste removal, and
demolition of onsite structures. Responsible for permitting
and multiple work areas and safety procedures were
followed. Provided support for daily site documentation
and project completion report.
Superfund site in Bridgeport, NJ
2012-2014
Conducted O&M on bio slurping equipment/ belt
skimmers and pneumatic skimmers for extraction of
LNAPL (free product) from groundwater at a New Jersey
Superfund site. Work included maintaining operation of
systems, weekly gauging of wells, and sampling of treated
water.
DG Hunter Power Plant – Alexandria, LA
December 2013
Performed Field Safety officer duties for oversight of a
glove bag technique, which included the removal of
approximately 54 total lineal feet of TSI of ACM
SKF – St. Louis, MO
October 2013
Performed all site activities that included the set up and
removal of all well injection equipment for the remediation
of known contaminants. Sodium Permanganate was mixed
to a pre-determined concentration set by the Project
Manager.
EnerSys – Omaha, Nebraska
September 2013
Management of operations and implementation of health
and safety for decontamination of a lead battery
maintenance and repair facility in Omaha NE.
2015 4 P.Flynn
Confidential client - Amelia, LA
January – August 2013
Performed Field Safety Officer duties and oversight at the
Marine Shale Processors Hazardous Waste incinerator.
Work included demolition of several bag houses and
ancillary structures and buildings. A Demag lattice boom
308 ton crane was used to pick down three oxidizer units
and one stack in height of 150’. Onsite stabilization of
hazardous waste using Cal cement for T&D. Oversight of
asbestos abatement of a secondary kiln was performed
utilizing confined space entry procedures.
ALCO Industries – Whiteford, MD
October – December 2012
Formulated a site-specific HASP for on-site activities that
involved soil sampling contaminated with arsenic,
chromium, and hexavalent chromium. Dust monitoring
procedures were implemented to include PELs for these
COCs. Oversight of sediment and erosion control
inspections and excavation activities as a third- party
consultant to the client.
Sanofi Aventis – Bridgewater, NJ
September – December 2012
Provided confirmation of proper decontamination of
several pharmaceutical laboratory buildings were done in
accordance with internal laboratory post-vacancy
requirements. A weekly log (with photo- documentation) of
on-site progress was completed. Conducted visual site
inspections of all sink traps for mercury, using an Ohio
Lumex 915 mercury analyzer to detect mercury vapor.
Bayer Crop Science – Institute, WV
August – October 2012
Performed Field Safety Officer duties and oversight of a
demolition subcontractor. Work included the demolition of
four hazardous waste storage tanks and decontamination of
a high- pressure steam boiler and precipitator. Reviewed
confined space entry and fall protection procedures for
work on the boilers and precipitator.
Thermo Fisher Scientific – Woburn MA
June 2012
Performed Field Safety Officer duties of an office space and
laboratory decommissioning project, to prepare for lease
termination. Responsibilities included oversight and record
keeping of daily progress reports, along with permitting.
Revised JHAs to include generator cleaning on roof.
Princeton University – Princeton, NJ
Summer 2012
Conducted H&S meetings and obtained all permits
required for subsurface clearance and critical zone
disturbance at a university campus. Assisted in soil
sampling for waste characterization and delineation of
metals and VOCs.
Ametek US Gauge – Sellersville, PA
Spring 2012
Performed Field Safety Officer duties on an industrial
manufacturing facility demolition project and provided
record maintenance for waste removal tracking.
Responsibilities included issuing permits for daily tasks,
safety oversight of site activities, and conducting safety
meetings.
PADEP / MDE – Multiple sites in PA & MD
2008 -2009
Led H&S efforts and was responsible for revisions of on-
site H&S documents for site- specific operations.
Performed drilling activities on several projects for the
Pennsylvania Department of Environmental Protection
(PADEP) and the Maryland Department of the
Environment (MDE), which included cluster wells and
packer testing for fracture contamination and delineation.
Valero and Sunoco refineries– Delaware City,
Philadelphia and Marcus Hook. PA
2007 -2009
Managed and facilitated multiple long term drilling and
soil sampling projects for Delaware Department of Natural
Resources and Environmental Control (DNREC), (PADEP),
and (MDE) to identify and delineate the confining layer in
Delaware City. Prepared and revised a HASP for specific
on-site tasks and was responsible for HASP
implementation.