new - diytrade.comdoc.diytrade.com/docdvr/543552/12833191/1274083721.doc · web viewtype cat-312...

Contents:

Inverter DC Tig Welder

Inverter DC Arc Welder

Inverter DC Tig/MMA Welder

Inverter DC Multi-functions welder

Inverter AC/DC Multif-functions welder

Inverter DC Pulse Tig Welder

Inverter AC/DC Tig Welder

Inverter AC/DC Pulse Tig &MMA Welder

Inverter Mig/Mag Welder

DC Compact Mig/Mag Welder

DC Separate Mig/Mag Welder

AC Spot Welder

Inverter DC Air Plasma Cutter

Conventional Air Plasma Cutter

Separate Wire Feeder

Mini Inverter DC TIG WelderModel:TIG-160S ;TIG-200S;TIG-250S

Description:

1. Advanced inverter technology, high working frequency, reduced size and weight, easy to carry.

2. HF pressure increasing arc initiation and pulsation thermal arc initiation design, excellent arc initiation performance, ample

welding current, super cost/performance ratio.

3. Unique output characteristics design, more suitable for filter wire welding, excellent weld appearance.

4. Wide working voltage range, strong adaptability to electricity network, more suitable for factory continuous operation.

5. Simple structure, good process, reliable and durable, easy for maintenance.

6. Be able to weld carbon steel, stainless steel, copper and titanor metal, etc.,

7. Complete accessories: welding torch, welding cable, earth clamp, carton box

Main technical parameters TIG-160S TIG-200S TIG250S

Input power voltage (v): AC 220+10% AC 220+10% AC 220+10%

Frequency (KHZ): 100 100 100

Rate input power capacity (KVA) 4.0 5.5 7.0

No-load voltage (V): 43 43 43

Output current range (A): 5-160 5-200 5-250

Rated output voltage (V): 16.4 18 20

Duty cycle (%): 40 40 40

Efficiency (%): 85 85 85

Insulation class: F F F

Weight (kg): 8.5 9.5 10.5

Measurement (cm): 43 x 21 x 36 43 x 21 x 36 43 x 21 x 36

Protection class : IP21 IP21 IP21

The data in the above table is only for reference. Please subject to the nameplate on the device.

Mini Inverter DC MMA Welder

Model:ARC-140;ARC-160;ARC-200

For pictures , please visit our website

1.Compact in volume, light in weight and power saved

2. Easy to arc initiation, resistance to interference , good force adjustment

3. Stable welding current, low welding spatter

4. Good welding result, deep welding pool, high intension

5. Protection for over current

6. Automatic voltage pulsation, compensation capability.

7. Applicable for various acid and basic welding electrodes

8. Down hand cellulose electrodes

9.Complete accessories: welding cable, earth clamp, welding holder, carton box

Specification ARC160 ARC200

Power voltage (V) 220+10% 220+10%

Rated output volt.(V) 26.4 28

Output current (A) 30-160 30-200

No-load loss(W) 40 40

Power factor 0.93 0.93

Housing Protection grade IP21 IP21

Insulation grade B B

Duty cycle (%) 40 40

Efficiency(%) 85 85

Weight(kg) 5.5 8

Dimensions(mm) 290×132×203 375×155×240


Inverter DC ARC Welder

Model:ZX7-315C;ZX7-400C;ZX7-500C

For pictures , please visit our website

1.Frequency is to 20KHZ,high working efficiency, reduced size and weight,

easy to carry.


3. Unique VRD protect electricity, safety.

4. MMA IS easy arc initiation, stable current and has no noise.

5. Fast, small splash, do not stick to slip, excellent weld appearance.

6. Adapt short arc initiation, accurately control current and protect tungsten needle.

7. Wide input voltage, strong adaptability.

8. MINI design, complete capability, especially for small project and family

9. 500A machine or above can be used air carbon arc gouging.

10.Complete accessories : welding cable, earth clamp, welding holder, carton box


Mini Inverter DC TIG/MMA WelderModel: WS-160; WS-200;WS-250

1.Advanced MOSFET inverter technology, high working efficiency, reduced size and weight, easy to carry.


3. HF pressure increasing arc initiation pulsation thermal arc initiation design, excellent arc initiation performance.

5. Double purposes. Suitable for TIG and MMA of various metals.

6. Unique output characteristics protection design, more suitable for filler wire

welding and the welding point is not black, excellent weld appearance.

7. Minimum welding current is to 5-8A,stable arc suitable for stainless steel plate welding.


9. Fast, small splash, do not stick to slip, excellent weld appearance.

10. Wide working voltage range, strong adaptability to electricity network, high duty cycle

11.Portable, easy to carry, suitable for DIY and family use.

12.Complete accessories: welding torch, welding cable, earth clamp, welding holder, carton box

Specification WS-160 WS-200 WS-250

Rated Input Voltage (V) AC 220V+10% AC 220V+10% AC 380V+10%

Rated Duty Cycle (%) 40 40 0

Input Capacity (KVA) 4 5.5 6

Rated welding currentTIG:160A TIG:200A TIG:250A

MMA:160A MMA:200A MMA:200A

No-load voltage DC55V DC55V DC55V

Gas retardation time 0.5-15S 0.5-15S 0.5-15S

Efficiency 80% 80% 100KHZ

Weigh t(kg) 8 12 12

Dimensions (mm) 380×160×260 490×180×280 670×340×630


Inverter DC TIG/MMA WelderModel: ZX7-250ST;ZX7-315ST;ZX7-400ST;ZX7-500ST

For details,please visit our website.


Inverter DC Multi-functions Welder(Cutter)

Model:CAT-312(D);CAT-416(D);CAT-518(D)

1.Advanced inverter technology, reduced size and weight, easy to carry.

2.Novel and effective, and low cost;

3. Three functions in one machine, Tig welding, MMA welding and air plasma cutting

4. Compact and easy for operation.

5. “D” Series are for 110/220 duel voltage input, automatic input voltage changing

6. Complete accessories: welding torch, welding cable, earth clamp, welding holder, ,cutting torch ,carton box


Inverter DC pulse MMA TIG CUT Series WelderModel:CUT-312P,CUT-416P,CUT-518P

TYPE CAT-312 CAT-416 CAT-518

Input voltage(V,Hz) AC22015%，50/60 AC22015%，50/60 AC22015%，50/60

Input power

capacitance(KVA)4.2 6 8

No-load loss(W) 40 40 40Duty cycle (%) 60 60 60Power factor 0.93 0.93 0.93Efficiency (%) 85 85 85Insulation class B B BProtection class IP21 IP21 IP21Weight (Kg) 9 13 13Size (mm) 371×155×285 425×205×355 425×205×355

TIG MMA PLASMA TIG MMA PLASMA TIG MMA PLASMAInput current(A) 10.2 15.6 19 15 22 27.3 19 30 35Rated output current(A) 120 110 30 160A 150 40 200 190 50

Current range(A) 10-120 10-110 15-30 15-160 15-150 20-40 20-180 20-180 25-50

No –load voltage(V) 55 55 220 62 62 250 70 70 280Working voltage(V) 15 25 110 16.5 26 120V 17 27 130Nozzle Ø internal(mm) - - Ø1.0 - - Ø 1.2 - - Ø 1.2Air pressure(mPa) - - 0.4 - - 0.4 - - 0.4Gas flow(L/min) 2-5 - 80 2-5 — 80 - — 80Cut thickness(mm) - - 1-8 - - 1-12 - - 1-12

Arc-leading HF vibrate Touch HF vibrate HF

vibrate Touch HF vibrate HF vibrate Touch HF vibrate

1.Advanced inverter technology,high working efficiency, reduced size and weight, easy to carry.

2.Novel and effective, and low cost;simple structure,esay for maintenance

3. Built-in alarming and protective circuits are provided to prevent over current,over heat,over voltage,under voltage,etc and ensure

safely operation.

4. HF pressure increasing arc initiation pulsation thermal arc initiation design,excellent arc initiation performance

5. Many kinds of welding functions in one machine,welding machinery,can also cut metal sheet cutting.reasonable price with great

value.

TYPE CUT-312P CUT-416P CUT-518P

Input voltage,frequency(V,Hz)

AC22015%，50/60 AC22015%，50/60 AC22015%，50/60

Input Capacity(KVA)

4.2 6 8

No-load loss(W) 40 40 40Duty cycle(%) 60 60 60Power factor 0.93 0.93 0.93Efficiency (%) 85 85 85Insulation class B B BPulse frequency (Hz)

50-200(MH)0.5-2(LH)

50-200(MH)0.5-2(LH)

50-200(MH)0.5-2(LH)

Down slope time (S)

0-5 0-5 0-5

Protection class IP21 IP21 IP21Weight (Kg) 9 13.5 14Size (mm) 371×155×285 425×205×355 425×205×355

TIG MMA CUT TIG MMA CUT TIG MMA CUT

Input current(A) 10.2 15.6 19 15 22 27.3 19 30 30Rated output current(A)

120 110 30 160A 150 40 200 190 50

Current range(A)

10-120

10-110 15-30 15-160 15-150 20-40 20-180 20-180 20-50

No –load voltage(V)

55 55 220 62 62 250 70 70 280

Working voltage(V)

15 25 110 16.5 26 120V 17 27 130

Nozzle Ø internal(mm)

- - Ø1.0 - - Ø 1.2 - - Ø 1.2

Air pressure(mPa)

- - 0.4 - - 0.4 - - 0.4

Gas flow(L/min) 2-5 - 80 2-5 — 80 — 80Cut thickness(mm)

- - 1-8 - - 1-12 - - 1-14

Arc-leading HF vibrate

Touch HF vibrateHF

vibrateTouch HF vibrate

HF vibrate

Touch HF vibrate

AC/DC Multi-functions welder（AC/DC Tig/Stick/plasma cut welder）Model: AC/DC- 40/160; AC/DC- 50/180

Description:1.Advanced inverter techenology,light,smart&efficient.2.One machine for more than 3 functions.DC Tig welding,AC Tig welding(suitable for Aluminum welding).DC Stick welding & air plasma cutting.3.For twice inverter technology,straight arc,stronger anti-clearence,and wider clearence. 4.complete accessories:Welding cable;welding torch;cutting torch;earth clamp;carton box.

Specification AC/DC-40/160(SUPER-416) AC/DC-50/180(SUPER-518)

Power voltage AC220±15% AC220±15%

Power factor 0.93 0.93

Rated input current 16A 16A

No load loss 40W 40W

Output current 10-200A; 10-160A TIG 10-200A; 10-180A TIG

Housing protection grade IP21 10 -150A arc; 20-40A cut IP21 10 -160A arc; 20-50A cut

Insulation grade B B

Max cutting thickness 10mm 14mm

Duty cycle 60% 60%

Efficiency 85% 85%

Power frequency 50/60Hz 50/60Hz

Max open-circuit voltage TIG 54V/arc 54V/cut 230V TIG 54V/arc 54V/cut 230V

Input power capacitance 4.6KVA 8 KVA

Gas delay time 0.5-10s 0.5-10s

Arcing way HF HF

Weight 32 kgs 35 kgs

Measurement (mm) 625 x 465 x 460 625 x 465 x 460

Down slop 0.2-5s 0.2-5s

Pre flow 0.2- 2 0.2- 2

Mini Inverter Pulse TIG WelderModel:TIG-160P;TIG-180P;TIG-200P

1. Simple design and advanced inverter technology, durable and easy to carry.

2. HF pressure increasing arc initiation and pulsation thermal arc initiation

design, excellent arc initiation performance.

4. Double purposes. Suitable for TIG and MMA of various metals.

5. Unique output characteristics protection design, more suitable for filler wire

welding and the welding point is not black, excellent weld appearance.

6. Minimum welding current is to 5-8A,stable arc suitable for stainless steel plate welding;

7. Various capacity, have pulsation arc welding capacity, adjust the time of

pulsation frequency and wastage, suitable the high quality welding.


9. Fast, small splash, do not stick to slip, excellent welding appearance.

10.Wide working voltage range, strong adaptability to electricity network, high duty cycle.

11.Portable,easy to carry, suitable for DIY and family use.

12.Complete accessories: welding torch, welding cable, earth clamp, welding holder ,cutting torch ,carton box

Specification TIG-160P TIG-180P TIG-200P

Rated input voltage (V) AC 220V+10% AC 220V+10% AC 220V+10%

Output current (A) 10-160 10-180 20-200

No-load loss(W) 40 40 40

Power factor： 0.93 0.93 0.93

Rated input current(A) 16 18 20

Insulation grade B B B

Max thickness(mm)： 6 8 10

Duty cycle (%) 50 50 50

Weight(kg) 9 11 13

Dimensions(mm) 430x320x205 430x320x205 430x320x205


Inverter Pulse TIG Welder

Model: WSM-250 ;WSM-315;WSM-400;WSM-500

1. Simple design and advanced inverter technology, durable and easy to carry.

2. HF pressure increasing arc initiation and pulsation thermal arc initiation design, excellent arc initiation performance.

3. Unique over voltage protect design, avoid the loss for jointing 380V by mistake.

4. Double functions. Suitable for TIG and MMA welding of various metals.

5. Unique output characteristics protection design, more suitable for filler wire welding and the welding point is not black,excellent weld

appearance.

6. Minimum welding current is to 5-8A,stable arc suitable for stainless steel plate welding;

7. Various capacity, have pulsation arc welding capacity, adjust the time of pulsation frequency and wastage, suitable the high quality

welding.

8. MMA is easy arc initiation, stable current and has no noise.

9. Fast, small splash, do not stick to slip, excellent welding appearance.

10.Wide working voltage range, strong adaptability to electricity network, high duty cycle.

11.Complete accessories: welding torch, welding cable, earth clamp, welding holder, carton box

Specification WSM-250 WSM-315 WSM-400 WSM-500Rated Input Voltage(V) 380+10% 380+10% 380+10% 380+10%

Rated Input Capacity (KVA) 9.5 13 16.8 19

Range of Output Current (TIG) 10-250A 10-315A 20-400A 5-500A

Range of output Current (MMA) 10-180A 10-200A 20-315A 5-500A

Base current range(A) 10-180 10-315 20-400 5-500

Peak Current (A) 10-250 10-315 20-400 5-500

Open Circuit Voltage 60V 60V 70V 70V

Loading Constant Rate 60% 60% 60% 60%

Weight (kg) 22 25 30 65

Dimension (cm) 30×50×45 30×50×45 30×58×45 30×50×45


Inverter AC/DC TIG Welder

Model: WSE-160; WSE-200;WSE-315;WSE-400;WSE-500

1.Stable arc, easy to fill in the wire.

2.Pedal control for current. Compact, low noise.

3.DC welding for stainless steel, alloy steel, carbon steel, copper and other color metal, AC welding for aluminum

4. Complete accessories: welding torch, welding cable, earth clamp, welding holder, carton box

Specification WSE-160 WSE-200 WSE-250 WSE-315 WSE-400 WSE-500Rated Input Voltage(V) 220V+10% 220V+10% 220/380+10% 380V+10% 380+10% 380+10%

Rated inputCapacity (KVA) 8 9 9.5 13 16.8 19

Range of Out putCurrent (TIG) 5-160A 10-200A 10-250A 10-315A 20-400A 5-500A

Range of output

current (MMA)5-160A 10-200A 10-250A 10-200A 20-315A 5-500A

Base current(A) 5-160A 10-200A 10-180 10-315 20-400 5-500

Peak Current (A) 10-160 10-200 10-250 10-315 20-400 5-500Open Circuit Voltage (V) 50 50 60 60 70 70

Rated duty cycle 60% 60% 60% 60% 60% 60%

Weight (kg) 22 25 25 25 30 65

Dimension (cm) 30×50×45 30X50X45 30×50×45 30×50×45 30×58×45 30×50×45


Inverter AC/DC Pulse TIG/MMA WelderModel: WSME-160;WSME-200;WSME-315;WSME-400;WSME-500

1.Quality square wave power supply, stable arc, HF arc stabilization not necessary;

2.Concentrated heat, easy to fill in the wire, especially suitable for wire welding in bicycle industry, etc;

3.Supper strong oxidization film removal capability, continuous and adjustable removal width, and good weld surface;

4.Foot pedal controller connection facilitates welder's operation;

5.Built-in alarming and protective circuits are provided to prevent over currnet, over heat, over

voltage, under voltage, etc and ensure safely operation;

6.High duty cycle, continuous operation without interruption at large current is available;

7.Suitable for welding of various metallic materials such as aluminum, aluminum alloy, carbon steel, stainless steel, copper, titanium,

etc.

8. Complete accessories: welding torch, welding cable, earth clamp, welding holder, carton box

The data in the above table is

only for reference. Please

subject to the nameplate on the

device.

Inverter DC Semi-Automatic Gas Shielded Welder(flux wire/gas)Model: MIG-150IC;MIG-200IC;MIG-250IC

MODEL WSME-160 WSME-200 WSME-315 WSME-400

Rated Input Voltage(V) 220±10% 220±10% 380±10% 380±10%Rated Input Current(A) 8 9 13 16.8Rated Input Capacity 3.6 5.5 9.2 11.2Rated Load Voltage(V) 15.6 18 22.6 26Output Current(A) 8-100 10-200 10-315 10-400Rated Duty Cycle 60%Pulse Rate 20-80Post Flow Time(s) 2-10Weight(kgs) 15 25 34 40Dimensions(mm) 370×210×440 570×360×6000 570×360×600 570×360×600

1. suitable for sheet over 0.8mm

2. cost saving and efficiency improving

3. with wire machine, and easy and considerable for operation

4. high welding speed, high arcing success rate

5. Continuous and discontinuous welding function

6.Automatic voltage pulsation compensation capability

7. Suitable for carbon steel, alloy steel, soft steel, etc, and various wire

8. little spatter, uniform welding pool, good welding shape.

9.Complete accessories: welding torch, welding cable, earth clamp, carton box

Specification MIG-150IC MIG-200IC MIG-250IC

Power Voltage (V) 220±10% 220±10% 220±10%

Rated Output Volt.(V) 12.5-20 16.5-24 18-26

Output Current (A) 20-150 50-200 50-250

Rated Input Current (A) 23.3 27.6 28.5

No-load Loss(W)： 40 40 40

Power Factor： 0.86 0.93 0.96

Duty Cycle (%)： 45 45 45

Housing Protection Grade： IP21 IP21 IP21

Insulation Grade ： B B B

Efficiency(%)： 85 85 85

Weight(kg)： 28 30 35

Dimensions(mm)： 570×295×528 570×295×528 570×295×528



Portable dc arc welderPlease visit our website .


DC Compact MIG/MAG Welder(MIG “C” series)

Model:MIG-250C;MIG-350C

1.A kind of semi auto welding equipment, compact structure, safe for using ,reliable

2.Automatic welding wire feeding and protective gas transportation

3.Adopting import material ,high efficiency, economical and convenient for operation;

4.Possessing automatic spot welding function; Digital Current and voltage display;

5.Conviniently for repairing, excellent welding performance, low spatter, deep liquid bath, high welding speed, high arc striking rate.

6.Widely used in lines such as automobile manufacturing machinery and equipment construction, ship building, and agriculture

machinery.

7.With complete accessories: welding torch, welding cable, earth clamp, carton box

Specification MIG-250C MIG-350C

Rated Input Voltage (V) 380±10% 380±10%

Rated Input Current (A) 13.0 21.0

Rated Input Capacity (KVA) 7.9 13.8

Rated Duty Cycle 40% 40%

Rated Output Current (A) 250 350

Diagram of Wire (mm) 0.8-1.0 0.8-1.2

Line Inserting Speed (mm/min) 0-11 0-11

Dimension (mm) 600×380×750 600×380×750

Weight (Kg) 65 75


DC Separate Mig/Mag WelderModel:MIG-250S;MIG-350S;MIG-500S

MODEL MIG-250S MIG-350S MIG-500S

INPUT VOLTAGE 3-380V/50/60HZ 3-380V/50/60HZ 3-380V/50/60HZ

RATED INPUT CAPACITY 11KVA 14.5KVA 25KVA

NO-LOAD VOLTAGE 16.5-37V 18-41.4V 21-53V

WELD CURRENT 250A 50-350A 80-500A

DUTY CYCLE 165A/22V 207A/24V 316A/30V

DUTY CYCLE 214A/25V 267A/27V 408A/34V

WEIGHT 123kg 150kg 189kg

SIZE(L*W*H) 930*375*780MM 930*385*720MM 960*385*720MM


Inverter IGBT MIG/MAG Welder

Model:NBC-250A;NBC-350A;NBC-400A;NBC-500A;NBC-630A

1.Suitable for sheet over 0.8mm .Cost saving and efficiency improving

2.With wire machine, and easy and considerable for operation

3. High welding speed, high arcing success rate

4. Continuous and discontinuous welding function

5. Automatic voltage pulsation compensation capability

6. Suitable for carbon steel, alloy steel, soft steel, etc, and various wire

7.Little spatter, uniform welding pool, good welding shape.

8. Predefining function It is easy for beginner to handle with digital display of welding characteristic control circuit.

9. Area influenced by hearing is smaller, so welding distortion is much less too.

10.Power source is deeply saved with smaller dimension & lighter weight.

11.Complete accessories: welding torch, welding cable ,earth clamp, carton box

Specification NBC-250A NBC-350A NBC-500A NBC-630A

Rated Input Capacity

(KVA) 8 15 24 35

Rated Input Voltage(V) 380±10% 380±10% 380±10% 380±10%

Rated Input Current(A) 12 21 37 53

Range of Welding

Voltage (V)17-27 17-31 17-39 18-44

Range of Welding

Current(A)60-250 60-350 60-500 80-630

Range of Welding Wire

(mm) 0.8-1.2 1.0-1.6 1.0-1.6 1.0-2.0

Rated Duty Cycle 60% 60% 60% 60%

Full-load Efficiency 89% 89% 89% 89%

Power Factor 0.95 0.87 0.87 0.87

Dimension(mm) 550x315x460 550x315x460 550x315x460 550x315x460

Weight (Kg) 24 35 45 66


INVERTER PULSE MIG/MAG WELDERModel:NBM350;NBM500;NBM630

For details, please visit our website:www.cnhighshine.com

Panasonic Type CO2/MAG Semi/Auto ARC Welder

NB II(KRII)-200;NB II(KRII)-350;NB II(KRII)-500

For picture, please visit our website:www.cnhighshine.com

1. Non-remote controller cable; Better mobility and fewer disconnection

2. Novel dust-prevent design; Widely used Separate electric and voltage control; Simply centralized

3. Adjustment system; Convenient for beginner and practiced hand

4. Unique flip-flop integrated circuit control system; Stable voltage; Little spatter; Easy shaped

5. Suitable for aluminum, copper, stainless steel and carbon steel welding

Specification NB‖(KR‖)-200 NB‖(KR‖)-350 NB‖(KR‖)-500

Rated Input Voltage(V) 380±10% 380±10% 380±10%

No-load voltage (V) 33 45 55

Welding Voltage (V) 16-24 17.5-31.5 18-39

Welding Current (A) 50-200 60-350 70-500

Base current (A) 10-180 10-315 20-400

Cooling mode Fan cooling Fan cooling Fan cooling

Rated duty cycle 60% 60% 60%

Weight (kg) 110 150 190

Extera; Dimension (mm) 365×715×690 365×715×690 365×715×690


Foot Operated AC Spot Welder

Model:DN1-10; DN1-16;DN1-25

For more details,please visit our website,

Technical parameter:

Model DN1-10 DN1-16 DN1-25

Rated Input voltage AC3 80V AC 380V AC 380V

Rated capacity 10KVA 16KVA 25KVA

Rated input current 26.3A 42.1A 66A

Arm length 260mm 280mm 300mm

Applicable thickness 1.5+1.5mm 2.5+2.5mm 3+3mm

Cooling mode Water cooling Water cooling Water cooling

Dimensions (mm) 340×800×1140 340×820×1200 340×840×1260


Mini Inverter DC Air Plasma Cutter

Model:CUT-30(D);CUT-40(D);CUT-50(D);CUT-60;CUT-80

1.Advanced inverter technology ,High cutting frequency;

2.With arc maintainence device, applicable to automatical cutting equipment;

3.Touch and untouch arc initiation;

4.Stable arc, long working time.

5.220V Single phase, Portable, Fan-cooled, Thermostatic protection, suitable for DIY and family use.

6. “D” Series are for 110/220 dual voltage input, automatic input voltage changing

7.Complete accessories: cutting torch, welding cable, earth clamp, carton box

Item\Data CUT-30 CUT-40 CUT-50 CUT-60 CUT-80

Power voltage（v） Single phase220v±15%

Single phase220v±15%




Rated Input power(KVA) 3.2 4.7 6.5 9 9

No-load voltage(V) 220 220 225 240 240

Rated output current(V) 30 40 50 60 80

Rated output voltage(V) 90 100 110 120 120

Duty cycle 60% 60% 60% 60% 60%

Pilot arc model HF HF HF HF HF

Burner inter Diameter(mm)

1.0 1.0 1.0 1.2 1.2

Pressure of air Compressor(kg)

4 4.5 4.5 5 5

Thickness（mm） 1-8 1-12 1-16 1-25 1-35

Weight（kg） 8 9 9 23 32

Measurement（mm） 390×155×250 390×155×250 390×155×250 510×200×350 400X550X240


Inverter DC Air Plasma Cutter

Model: LG-40;LG-60; LG-100;LG-120; LG-160;LG-200

1.Advanced inverter IGBT technology ,High cutting frequency;

2.Portability,energy saving ,noiselessness and high reliability.

3.With arc maitainence device, applicable to automatical cutting equipment;

4.Touch and untouch arc initiation;

5.suitable for stainless steel ,aluminum ,copper, titanium, cast iron, carbon steel, alloy steel, alloy metal and nearly all the metals

cutting.

6.Stable arc, long working time.

7. Complete accessories: cutting torch, welding cable, earth clamp, carton box

Specification LG-40 LG-60 LG-100

Rated Input Voltage (V)Three Phases

380±10%

Three Phases

380±10%

Three Phases

380±10%

Rated Input Capacity (KVA) 5.7 8.6 15.6

Rated Output Current (A) 40 60 100

Cutting Current Range(A) 20-40 20-60 20-100

No-load Voltage(V): 240 240 240

Max Cutting Thickness(mm) 1-8 1-16 1-35

Full-load Efficiency (%) 89 89 89

Power Factor 0.96 0.96 0.96

WEIGHT (Kg) 18 25 35


Conventional Air Plasma Cutter

Wire Feeder

XMSB-10-F Rigid closed type wire feeder

This type wire feeder is based on our company’ s patented’ dual drive wire feeding mechanism with other following features:

　　1.More wire feeding power, stable wire feeding can be achieved

　　2.Rigid,solid,more durable construction

　　3.All closed type design, dust proof. Good for all severe working Environment

　　Best suitable for fluxed core wire of size Ф1.6,Ф2.0,Ф2.4mm, in petrochemical industry, natural pipeline welding, field jop etc..

　　Variable front adaptor available, compatible with almost all welding torch connection, such as Panasonic, Lincoln, Euro, OTC,.

Import goods quality, local product price, ideal choice for customer.


new - diytrade.comdoc.diytrade.com/docdvr/543552/12833191/1274083721.doc · web viewtype cat-312...

Documents