doc 11 bucket elevator
TRANSCRIPT
![Page 1: Doc 11 bucket elevator](https://reader030.vdocuments.site/reader030/viewer/2022020123/55af439d1a28ab47078b45a9/html5/thumbnails/1.jpg)
http://www.pneucon.net/bucket-elevator.html
Bucket Elevator manufacturer India, Bucket Elevator manufacturer Gujarat
A Guide on Functioning, Buying, and Maintaining the Bucket Elevator
A bucket elevator, also sometimes referred as a grain leg, is actually the system for moving flow able
goods in large volume (usually seeds or fertilizers) upright.
The entire system is made up of:
1. Buckets for carrying the stuff
2. A strap to hold the buckets and spread the pull
3. Mechanism to steer the strap
4. Other parts for filling the buckets, for collecting the stuff, for keeping the tension of the belt
and for covering and guarding the entire system
How it Works:
The stuff to be transported is supplied into an estuary. Buckets plough into this stuff, and transmit it
upwards and above the main pulley, subsequently dumping the stuff outside. The unfilled buckets
then go on to repeat the process.
Where it is available in India?
As far as our nation is concerned, you can find many manufacturer of the entire system in
Ahmedabad, the capital of Gujarat. Theses manufacturers are also exporter of the entire system
and supply it to various other nations.
How to Look For It
These are the industrial products and are rarely sold in the open market. In case you want to get
bucket elevators, you need to search for the companies that manufacture them on the internet. On
the web you will find the contact details of lots of manufacturers who engage in the manufacturing
of bucket elevators.
Prices
Prices can be obtained from the websites of their manufacturers. However, it is best that you ask for
the quotation before you buy it. This will give you a fair idea regarding which of the manufacturers
are providing at cheap rates. Also, if possible buy it from some sort of trade exhibition. You might get
a discount.
Necessary Maintenance of Bucket Elevators
There are various parts in bucket elevators. If you provide all the necessary maintenance services to
the bucket elevators they will last long and would serve for many years.
![Page 2: Doc 11 bucket elevator](https://reader030.vdocuments.site/reader030/viewer/2022020123/55af439d1a28ab47078b45a9/html5/thumbnails/2.jpg)
Look for any sort of awkward sound that comes when you operate the bucket elevators. If in
case there is some sort of awkward sound coming out when your system is operating
chances are there that there is something wrong. Immediately turn off the elevator and try
to spot the problem.
Be aware of how to set the safety system of the elevator before you start with any sort of
maintenance activity. This will prevent the machine from starting even if some person
unaware of maintenance activity turns the machine on.
Always clean and lubricate all the parts carefully. Lubricate all the moving parts in particular.
Always check all the screws, nuts and bolts and ensure that they are tight because any loose
nut can cause havoc to the machine.
Check the strap of the bucket elevators. If in case they are loose, don’t forget to tighten
them up. Also check the strap for any kind of wear and tear.
Pulley should be properly lubricated and there should be no leakages in the bearings.
It is always advisable that you ask these sorts of maintenance services as a maintenance contract
from the supplier. However you can conduct review maintenance yourself as well.
For more details visit our website: http://www.pneucon.net/bucket-elevator.html