DMC CableLok®

is known for its state-of-the-artdesign. DMC combined radial swage technology and theexperience of over half a century in the connector business tocreate a remarkable swaging method for electrical cableconnection.

CableLok®

QualificationsDMC CableLok® is qualified to meet or exceed all of thenationally recognized standards, including ANSI C119.4,NEMA CC 1 and ASTM B117.

DMC CableLok® provides you with a superior cableconnection, as proven by various tests that were conducted.

Use DMC CableLok® for all of your substation cableapplications. Call DMC for more information.

COMPLETE ENGINEERING, TESTING and MANUFACTURINGfacilities on our premises. Other sizes and specifications canbe designed and manufactured to fit your requirements. CallDMC for your custom applications.

Using the DMC hydraulic tool, thisconnector test sample is swaged onto thecable during the conductor damage testper ANSI C119.4.

CableLok®

Cable Connecting System

Standard Aluminum Compression Connectors

Standard Aluminum Compression Connectors

Thickness of NEMA Pads

Standard Aluminum Compression Connectors

Now Available:SPLIT FITTINGS

Standard Aluminum Compression Connectors

Prep and clean cable.

To ensure a proper connection, the DMCCableLok® connector must be placed withinthe tool so that the swage dies are positionedbetween the “swage lines”.

The Inspection Hole allows you to verify thatthe cable is bottomed out in the connector beforemaking the swage.

DMC CableLok® parts come pre-filled with an anti-oxidant compound to create a superior contact surface.

The CableLok® tool uses a 10,000 psi hydraulic pump.Pump comes with hydraulic hose and carrying case.

DMC installation tooling is available for purchase,rent or lease. Contact your local representative formore information.

Standard Connectors - Ordering Information & Instructions

Installation is Easy with CableLok®

Special Aluminum Compression Connectors

Special Aluminum Compression Connectors

Special Aluminum Compression Connectors

Special Aluminum Compression Connectors - Ordering Information & Instructions

Bus Sizes

CableLok®

Connector Size Selection Table

07-2008

World Headquarters14502 South Figueroa Street

Gardena, CA 90248 USATel: (310) 323-6200 • Fax: (310) 715-9488

www.dmcusa.com

DMC PowerLok® has been successfully installed around theworld for over 10 years. Use PowerLok® for joining yoursubstation bus with no welding.

Try DMC GroundLok© for connecting your copper groundingsystems. Create a fast, easy, safe connection within minuteswhile using the same tooling as CableLok.

Use DMC Telecom GroundLok© connectors for all of yourcell site grounding applications. With a lightweight tool and avariety of configurations available, installation is simple.

When you use Power Products manufactured by DMC, youcan be sure that you will have a technically superior connection.

®

DMC CableLok® Tooling is easy to useand is available through rent, lease or purchase.

We make it easy for you.

CableLok®

Tool Kits

CableLok®

Connector Size Selection Table