1

Personal Information Name: PROF.DHIRENDRA KUMAR SINGH

Designation: Professor Since 01 January 2008 Father’s Name: Late PROF.RAGHUVEER SINGH,

Ex-Professor & Head, Political Science Department, DDU University of Gorakhpur Gorakhpur-273001

Date of Birth: 7th June, 1963 E-mail: dksme@mmmut.ac.in, dhirenks@gmail.com,

dks_iitk@rediffmail.com Nationality: Indian Address for Communication:

Professor & Head, Mechanical Engineering Department M.M.M.University of Technology (Formerly M.M.M.Engg.College), Gorakhpur-273010 (India)

Permanent Address: C-159, Sector –C, Mahanagar, Lucknow (India) Teaching & Research Experience:

32 years of teaching & research experience at M.M.M.University of Technology (M.M.M.Engg. College), Gorakhpur (UP), India, Indian Institute of Technology Roorkee (India), Indian Institute of Technology Kanpur (India), and University of Garyounis, Benghazi, Libya (North Africa)

Telephone No: +91-9452972971, +91-8765935331

Education: Ph.D. (2006) Mechanical Engineering with the specialization in Advanced

Manufacturing Technology, Indian Institute of Technology Kanpur, Kanpur (India).

M. E. (1997) Production & Industrial System Engineering, University of Roorkee, Roorkee (India) (Now Indian Institute of Technology Roorkee).

B.E. (1985) Mechanical Engineering, Madan Mohan Malaviya Engineering College, University of Gorakhpur (India) (Now Madan Mohan malaviya University of Technology Gorakhpur).

Ph.D. Thesis : Worked on Project of DST India-NSF Washington DC, USA “Investigations into Magnetic Abrasive Finishing Process” Under the Supervision of PROF.V.K.JAIN & V.RAGHURAM

PROF.D.K.SINGH Ph.D. (IIT/K)

Former Dean of Faculty Affairs (2018-20) Professor & Head, Mechanical Engineering Deptt. Madan Mohan Malaviya University of Technology

Gorakhpur-273010 Ex-Director, Rajkiya Engineering College, Azamgarh (UP)(2015-2018),

E-mail: dksme@mmmut.ac.in, dhirenks@gmail.com Phone: +91-9452972971, +91-8765935331 (CUG) Fax: 0551-2270011

2

Participated in Foreign Component Training “on Leadership

for Advancing Higher Education in India”, March 6-March 10,2019 at HARVARD GRADUATE SCHOOL OF EDUCATION, CAMBRIDGE, MASSACHUSETS, USA SPONSORED BY MHRD, NEW DELHI & HOSTED BY INDIAN INSTITUTE SCIENCE EDUCATION & RESEARCH KOLKATA (WEST BENGAL)

Participated in Indian Component Training “on Leadership of Academician Program “February 11-23, 2019 at INDIAN INSTITUTE SCIENCE EDUCATION & RESEARCH KOLKATA (WEST BENGAL) SPONSORED BY MHRD, NEW DELHI

Patent:

Indian Patent on “A Method for Magnetic Abrasive Finishing using a Pulsating Flexible Magnetic Abrasive Brush and a Magnetic Abrasive Finishing Device”Patent Application No. 1990/DEL/2005A filed Dated 27-07-2005 and Published on Patent Journal on 13-07-2007 International Classification: B24B 31/00

Teaching and Research Experience: Professor of Mechanical Engineering, Madan Mohan Malaviya University of

Technology, Gorakhpur (01, January 2008 to till date). Ex-Director, Rajkiya Engineering College (Formerly Manyawar Kanshi Ram

Engineering College of Information Technology), Azamgarh (UP), Affiliated College of Dr.A.P.J.Abdul Kalam Technical University, Lucknow (Formerly U.P.Technical University) from 20 January 2015 to 19 January 2018.

Head, Department of Mechanical Engineering, Madan Mohan Malaviya University of Technology (Formerly Madan Mohan Malaviya Engineering College), Gorakhpur (28th February 2013 to 19th January 2015) and 31-12-2018 to till date.

Assistant Professor of Mechanical Engineering, Madan Mohan Malaviya Engineering College,Gorakhpur (01, January 2000 to 31-12-2007).

Assistant Professor, Mechanical Engineering Department, University of Garyounis, Libya, North Africa (October 2006 to July 2007).

Lecturer of Mechanical Engineering, Madan Mohan Malaviya Engineering College, Gorakhpur (February 1988 to December 1999).

Research Scholar, Mechanical Engineering Department, Indian Institute of Technology Kanpur (July 2000 to February 2005).

Master Fellow, Mechanical & Industrial Engineering Department, University of Roorkee, Roorkee, (July 1995 to February 1997).

3

Awards 1. Malaviya Outstanding Teacher Award 2019 on 5th September 2019. 2. Citation For Out Standing Contribution for the Development & Growth of

the University 2018 3. Academic Excellence Award during Alumni Convention held in November

2007. 4. Research and Development Award on 26th January, 2008.

Achievements during As Ex-Director (Jan 2015 to Jan 2018)

Established & Shifted Rajkiya Engineering College Azamgarh (U.P.Govt. State

College) running in the campus of MMMUT Gorakhpur since 2010 to its own campus

in July 2016 with all four years students

Actively involved for the construction of the College.

AICTE APPROVAL in April 2017.

TEQIP-3 (TECHNICAL EDUCATION QALITY IMPROVEMENT PROGRAMME

OF Rs 10.00 Crore 2017-18 to 2020-21) Institute Development Plan, Action Plan, &

Procurement Plan prepared and Approved by MHRD.

DEAN DAYAL UPADHAYA QALITY IMPROVEMENT PROGRAMM OF Rs

10.00 Crore 2017-18 to 2020-21 by State Govt.

Regular Faculty Selection 2017

Various Motivational Lectures series organized.

Two University Approved FDPs Organized.

Preparations of Various Advanced Labs Setup done and installed.

Academic Research Project: Carbon Nanostructures reinforced epoxy composites for structural applications”18.00

Lacs, CRS, MHRD, India

Design and fabrication of wave energy converter, Rs 20,000/- UPCST.

Power Generation from Speed breaker using rack and pinion mechanism

Twinning Project under TEQIP-III MHRD on “Ergonomic Assessment of Workshop Operations: A Case Study” 2.0 Lacs at MMMUT Gorakhpur-273010 PIs Dr. T.N.Deasai, Dr.Ravikant, Dr.Dinesh Singh, MED, SVNIT Surat and Dr.D.K.Singh, Dr.Sanjay Mishra, MED, MMMUT Gorakhpur

4

Micro to Nano finishing by Pulsating Flexible Magnetic Abrasive Brush Funded by UGC as MRP Rs 10.00 Lacs 2013-2016

“Design and Development of Wave guide for microwave power transmission in space antenna”, Space Application Center, ISRO, Ahamdabad, Gujarat (India) 2010-2011.

Member, Expert Committee of University Grant Commission, New Delhi

Member, Expert Committee , Technical Education, U.P.Government for Skills, Invention & Innovations to establish Center of Excellence in U.P.

DEAN OF FACULTY AFFAIRS, M.M.M.UNIVERSITY OF TECHNOLOGY 12th April 2018 to April 2018. MEMBER, GOVERNING BODY, GURUNANAK DEV ENGINEERING COLLEGE, LUDHIANA AS UGC NOMINEE FROM MAY 2019 TO MAY 2024.

MEMBER, BOARD OF MANAGEMENT, M.M.M.UNIVERSITY OF TECHNOLOGY From U.P.GOVT Nominee for 2 Years From 26th March 2018 to till date

MEMBER, Board of Governors, Rajkiya Engineering College as Academician for 3 Years from November 2018 to till date.

MEMBER ACADEMIC COUNCIL , M.M.M.UNIVERSITY OF TECHNOLOGY

Member Executive Council, Dr. APJ ABDUL KALAM TECHNICAL UNIVERSITY LUCKNOW (Formerly UPTU) 2016-2018

Member, Academic Council, Dr. APJ ABDUL KALAM TECHNICAL UNIVERSITY LUCKNOW (Formerly UPTU)2016-2018

5

Member, Finance Committee, Dr. APJ ABDUL KALAM TECHNICAL UNIVERSITY LUCKNOW (Formerly UPTU) 2016-2018

Member, Expert Committee, National Board of Accreditation India

Member, EXPERT COMMITTEE AICTE, New Delhi

Member, APPALEATE COMMITTEE AICTE, New Delhi

Member, Finance Committee, Rajkiya Engineering College, Sonbhadra (UP)

Member, Finance Committee , Rajkiya Engineering College, Kannauj (UP)

Member, APPALEATE COMMITTEE AICTE, New Delhi

Administrative Experience at U.P.Govt. Level Member Mechanical Expert , Technical Education, U.P.Government, Center for

Skills, Invention and Innovation for establishing Center of Excellence in U.P.

Nodal Officer (Monitoring & Evaluation) for TEQIP Phase II January 2012

Expert Member for Evaluation of Engineering Project, Council of Science & Technology, UP Government.

Administrative Experiences (i) Founder Director, Rajkiya Engineering College, Azamgarh(UP)

(Formerly Manyawar Kanshiram Engineering College of Information Technology, Azamgarh) from 20th January, 2015 to 19th January 2018. (U. P. State Govt. Engineering College).

(ii) Head of the Mechanical Engineering Department, Madan Mohan Malaviya University of Technology (Formerly M.M.M.Engineering

6

College): 01 March 2013 to 19 January 2015 and 31-12-2018 to till date.

(iii) DEAN PLANNING: July 2010 to 19 January 2015 (iv) Dean Planning, Research, Development & Consultancy: 01 July

2010 to 30 August 2012 Project Proposal Formulation/Preparation for Academic Autonomy

Submitted in August 2010 to GBTU, Lucknow and Granted Autonomy July 2011by UGC, New Delhi),

Preparation of Project Proposal for New QIP Center Submitted in July 2011 and Granted by AICTE in August 2011.

M.Tech. Accreditation Visit was organized.

Proposal for Improving Employability of Graduates passing out from UPTU Institutions submitted to UPTU, Lucknow.

(v) Coordinator, QIP Center since August 2011 to January 19, 2015 (vi) Member, Academic Council, M.M.M.Engineering College, Gorakhpur (vii) Controller of Examination: July 2009 to January 19, 2015

After grant of Academic Autonomy, Organized Three Class Test, End Semester Examination 2011-12, Implementation of Examination Software Evaluation of Answer Books, Showing of Answer books, Implementation of errors, if any through Grievances Cell, Preparation of Results and Declaration of the results

(viii) Chief Warden: September 2009 to 30th June 2010 (ix) Warden : 7 Years (x) Proctor: July 2005 to July 2006. (xi) Member Discipline Committee (xii) Member Academic Excellence Committee constituted for TEQIP

Phase-I (2005 to till date) (xiii) Convener, Departmental World Bank Committee for TEQIP (xiv) Deputy Dean of Students (July 2006 to July 2007). (xv) NCC officer from June, 2008 to December 2009 (xvi) O/Cs of Cricket, Badminton, and Table Tennis (xvii) Judges in various technical events, sports activities

7

(xviii) Actively involved in most of the functions organized at Departmental and College level.

Interaction with U.P. Technical University, Lucknow Member, Moderation Committee since 2006

Group Leaders for Even/Odd Semester Examinations since 2007

Head Examiner for Evaluation of Answer Books since 2007

Paper setter for B.Tech./M.Tech. Mechanical Engineering Courses since 2006

Expert for the evaluation of M.Tech. Dissertations

Head Examiner for Evaluations of M.Tech. Answer Books

Organized Center Evaluation for M.Tech. Answer Books

Member, Inspection Committee formed by the University

Selected Publications: Refereed Journals/International/National Conferences.

1. A Technical Paper “Quality Optimization of Green Sand Castings” Dhirendra Kumar Singh and Pradeep Kumar, Indian Foundry Journal, 1997, pp 23-33.

2. Parametric Study of Magnetic Abrasive Finishing (MAF) Process, Journal of Material Processing Technology, April 2004, pp22-29.

3. Analysis of Surface Texture generated by Flexible Magnetic Abrasive Brush, D. K. Singh, V.K.Jain, and V.Raghuram, R.Komanduri, WEAR, 259(2005) 1254-1261.

4. On the process performance of Flexible Magnetic Abrasive Brush,Dhirendra Kumar Singh, V.K.Jain, and V.Raghuram, Machining Science and Technology, 9:601-619, 2005.

5. Experimental Investigations into Forces acting during Magnetic Abrasive Finishing Process.Dhirendra Kumar Singh, V.K.Jain, and V.Raghuram, Int. Jr. of Advanced Manufacturing Technology, Vol. 30, 7-8, October 2006 pp 652-662.

6. Analysis of performance of Pulsating Flexible Magnetic Abrasive Brush (P-FMAB), Vijay Kumar Jain, Dhirendra Kumar Singh, and VidyalaRaghuram, Machining Science & Technology, International Journal, Vol 12, Issue 1, January 2008, 53-76.

8

7. Experimental Investigation and Mathematical Modeling of Cutting Edge Temperature for Turning Process, International Journal of Engineering Studies. ISSN 0975- 6469 Volume 3, Number 2 (2011), pp. 149-157.

8. Optimization of Turning Process Parameters, D.K.Singh&Chandan Bhagat, ISST Journal of Mechanical Engineering, ISSN: 0976-7371, Jan-June 2011, pp 45-56.

9. Modeling and Analysis of Solidification in Casting Process, Jawed Rafiq& D.K.Singh,International Journal of Mechanics and Solids.ISSN 0973-1881 Volume 6, Number 3, 2011, pp. 175-189.

10. Modeling and analysis of mould filling in Injection Moulding, Arvind Kumar Singh & D.K.Singh , International Journal of Engineering Research and Technology.ISSN 0974-3154 Volume 4, Number 5,2011, pp. 463-470

11. Process Planning of micro electro chemical machining process, Rakesh Kumar Singh & D.K.Singh, International journal of applied science and technology "ISSN 2231-3842,PAGE NO: 50,VOL I, April2011.

12. Strategic Optimization and Investigation effect of Process Parameters on Performance of Wire Electric Discharge Machine (WEDM), Atul Kumar & D.K.Singh, International Journal of Engineering Science and Technology, Vol 4 No. 06 June 2012 (ISSN: 0975-5462, pp 2766-2772.

13. Analysis and Effect of input Process Parameters on Surface Roughness and Tool Flank wear in Turning Operation, BadruDoza and D.K.Singh, International Journal of Engineering Science and Technology,Vol 4 No. 06 June 2012 ,ISSN: 0975-5462, pp 2759-2765.

14. Analysis and Effect of input Process Parameters on Surface Roughness and Tool Flank wear in Facing Operation, BadruDoza and D.K.Singh, International Journal of Engineering Research and Technology,Vol 1 No.4 June 2012 ISSN: 2278-0181), pp 1-7.

15. Performance Analysis of Wire Electric Discharge Machining (W-EDM), Atul Kumar & D.K.Singh, International Journal of Engineering Researh& Technology, Vol 1(4), June 2012, ISSN: 2278-0181, pp1-8.

16. Process Planning of Micro Electro-Chemical Machining Process, Rakesh Kumar Singh & D.K.Singh, International Journal of Applied Science and

9

Technology, (2011) ISSN 2231-3842, pp 50-60. 17. On the Analysis of Molten Metal Flow through Sprue in Casting

Process, Mohd. Imran Ansari & D.K.Singh, International Journal of Engineering Research & Technology, ISSN: 2278-0181 Vol(1) Issue 4, August 2012.

18. Modelling and Analysis of Mold Filling Parameters for PP and ABS MaterialsUsing Software Simulation, Arvind Kumar Singh & D.K.Singh, International Journal of Engineering Research & Technology, ISSN: 2278-0181, Vol 1 Issue 7, September 2012.

19. Material Processing Technology for Soft Ferrites Manufacturing Deepak Bhalla, DK Singh, SK Aggarwal, Dipti Seth, American Journal of Material Science 2012, 2(6): 165-170.

20. Control parameters Optimization of Wire-EDM by using Genetic Algorithm, Rajneesh K Singh & D.K.Singh, International Journal of Mechanical, Civil, Automobile and Production Engineering,Vol 3, issue 9,September 2013, pp327-332.

21. Parametric optimization of Wire-EDM by using Fuzzy Logic, Rajneesh Kumar Singh, D.K.Singh, Vivek Kumar, IJBSTR RESEARCH PAPER, Vol 1 Issue 8, August 2013, pp 37-41 ISSN 2320 – 6020.

22. Modelling and Optimization of Magnetic Abrasive Finishing Process, Asit shukla & D.K.Singh, International Journal of Engineering Research & Technology, Vol.2 - Issue 9 (September - 2013). E-ISSN: 2278-0181.

23. Application of MATLAB INMODELING and Optimization of Unconventional Finishing Process, AsitShukla, Shah Fateh Azam, Dr. D.K.Singh, International Journal of Engineering Research & Technology, Vol.2 - Issue 9 (September - 2013). E-ISSN: 2278-0181.

24. Optimization of Electric Discharge Machining Process Parameters Using Genetic Algorithm, Shah Fateh Azam, Dr. D.K.Singh, International Journal of Engineering Research & Technology, Vol.2 - Issue 9 (September-2013), E-ISSN: 2278-0181.

25. Mathematical Modeling of Material Removal Rate (MRR) in EDM using Neural Network and Regression, Arun Singh & D.K.Singh, 2nd International Conference on Advances in Mechanical, Manufacturing and building Sciences (ICAMB-2012) held during Jan 9-12, 2012.

10

26. Nano finishing by Pulsating Flexible Magnetic Abrasive Brush (P-FMAB), D.K.Singh, V.K.Jain, V.Raghuram, 23rd ASPE Annual Meeting and 12thICPE,October 19-24, 2008, Porland, Oregon, USA

27. On the Process Performance of CI engine using Bio-fuels, Narendra Singh, D.K.Singh,B.B.Singh, 16th European Biomass Conference and Exhibition, June 2-6,2008 Valencia, Spain.

28. Adoption of Manufacturing Best Practices and Advanced Manufacturing Technology in India, D.K.Singh and Sanjay Kumar, International Conference on Decision Sciences and Technology for Globalization, January 2-4, 2008, Institute of Management Technology, Ghaziabad, India.

29. Acquisition of Force Data during Magnetic Abrasive Finishing by Computer- based Data Acquisition System (DAQ), International Conference on Laboratories, University of Garyounis, Benghazi, Libya 29-31st May 2007.

30. “On the temperature analysis of magnetic abrasive grinding” 22nd Annual Conference, American Society for Precision Engineering (ASPE), October 15-20, 2006.Monterey, California , USA,

31. Surface roughness and surface texture generated by Pulsating Flexible Magnetic Abrasive Brush, DhirendraK.Singh, V.K.Jain, V.Raghuram, R.Komanduri, ASME World Tribology Congress, September 12-16, 2005 Washington DC, USA.

32. Parametric Study of Magnetic Abrasive Finishing (MAF) Process, 14th International Symposium for Electromachining, The University of Edinburgh, Scotland, UK, 30th March-1st April 2004.

33. Experimental Investigations into Magnetic Abrasive Finishing of Alloy Steels, Dhirendra K. Singh, V.K.Jain, and V.Raghuram, Proceeding of JSME sponsored International Conference on Leading Edge Manufacturing in 21st Century, Niigata, Japan, November 3-6, 2003. pp 406-410.

34. Superfinishing of Alloy Steels using Magnetic Abrasive Finishing Process, DhirendraK.Singh, V.K.Jain, and V.Raghuram, 18th Annual Conference, American Society for Precision Engineering (ASPE), Portland, Oregon, USA, October 26-31, 2003.

35. Electrochemical Spark Machining (ECSM): A Review, D.K.Singh, V.K.Jain,

11

and V.Raghuram, Proceeding of the National Symposium on Manufacturing Engineering in Twenty First Century, Indian Institute of technology Kanpur, India, March 2-3, 2001,pp 139-142.

36. “Micro Machining by Magnetic Abrasive” D.K.Singh, National Conference on Emerging Trends in Mechanical Engineering ETME-2011” held during September 17-18, 2011 at FET-RBS, Agra.

37. Experimental Investigation of Cutting Edge Temperature during Turning Process, Brijendra Gupta & D.K.Singh, National Conference on Emerging Trends in Mechanical Engineering , September 17-18, 2011 at FET-RBS, Agra.

38. “Optimization of Turning Process Parameters”, ChandanBhakat& D.K.Singh, Proceedings of Emerging trends in Mechanical Engineering (ETME-2009) October 12-13, pp125-133, ISBN 93-8004339-2.

39. Recent Developments in Electro-Chemical Machining Process”, Rakesh Kumar Singh, D.K.Singh, Proceedings of Emerging trends in Mechanical Engineering (ETME-2009) October 12-13, pp143-149, ISBN 93-8004339-2.

40. Modeling and Simulation of Deep Drawing Process Based on One-Step Inverse Metal Forming Analysis, D.K.Singh& Manish Kumar Singh, International Journal of Metal Forming, Communicated, September , 2011.

41. Analysis of Molten Metal Flow through Sprue Using Fluent, Mohd. Imran Insari& D.K.Singh, Souvenir of National Conference on “ Emerging Trends in Mechanical and Electrical Engineering, 12-13, June 2012.

42. Electrochemical Spark Machining Process for non conducting materials: A Review, R.K.Singh, D.K.Singh, Manoj Kumar “International Journal of Innovations in Engineering and Technology (IJIET)”Volume 7 issue1, 2016, ISSN: 2319 – 1058, pp 328-334.

43. Optimization of process parameters affecting surface roughness in magnetic abrasive finishing process: Shadab Ahmad, Swati Gangwar, Prabhat Chand Yadav & D. K. Singh “Materials and Manufacturing Processes (Taylor & Francis) “ISSN: 1042-6914 (Print) 1532-2475 2017, DOI: 10.1080/10426914.2017.1279307.

44. Advances in Magnetic Abrasive Finishing for Futuristic Requirements - A Review”, Singh R.K., Singh D.K. and Gangwar S., “8th International

12

Conference on Material Processing and Characterization, Organized by Elsevier, Materials today-proceedings (Scopus index) Materials Today: Proceedings 5 (2018) 20455–20463.

45. Fuzzy Logic Optimization of Process Parameters affecting Surface Temperature in MAF, Singh R.K., Singh D.K. and Gangwar S., “International Conference on Contemporary Research in Mechanical, Elsevier, IOP- Material science and engineering (Scopus index). IOP Conference Series: Materials Science and Engineering, Volume 404, conference 1

46. Multi-Objective optimization of Magnetic Abrasive Finishing by Desirability Function coupled with Genetic Algorithm, Rajneesh Singh, Swati Gangwar,D.K.Singh, Shadab Ahmad, 3rd International Conference on Advanced Production and Industrial Engineering, October 5-6, 2018, organized by Center for advanced production and Industrial Engineering Research (CAPIER), Delhi Technological University, New Delhi, India.

47. “A novel hybridization of artificial neural network and moth flame

optimization (ANN-MFO) for multi-objective optimization in magnetic abrasive finishing of aluminum 6060” By Rajneesh Kumar Singh, Swati

Gangwar, D. K. Singh, Vimal Kumar Pathak ,Journal of the Brazilian Society of Mechanical Sciences and Engineering (BMSE) (2019) 41-270 Springer.

https://doi.org/10.1007/s40430-019-1778-8

48. “Experimental Investigation on Temperature affected Magnetic Abrasive Finishing of Aluminium 6060” by Rajneesh Kumar Singh, Swati

Gangwar, D. K. Singh, MATERIALS AND MANUFACTURING PROCESSES

https://doi.org/10.1080/10426914.2019.1628263 (Taylor & Francis)

49. “Exploration of GRA based Multi-objective optimization of Magnetic

Abrasive finishing process using Simulated annealing” Singh R.K.,

Gangwar S. and Singh D.K, accepted 2019, FME Transactions Journal

(2020) 48, 195-203.

50. “Exploration of Desirability Function Analysis Based Particle Swarm

Optimization for Magnetic Abrasive Finishing of Mild Steel” Singh

R.K., Gangwar S. and Singh D.K., Journal of Advanced Manufacturing

Systems, 2019. (Accepted).

13

51. Multi-objective optimization of Magnetic Abrasive Finishing by Desirability Function with Genetic Algorithm, Rajneesh Kumar Singh, Swati Gangwar, D.K.Singh and Shadab Ahmed, International Conference on Energy Environment & Material Sciences (ICE2M-2019) IEEE Conference ID 48764 held during December 1-3, 2019.

52. A Review on Effect of Tool Geometries and Electrolyte Behavior on Machinability of ECSM, Roopa Singh, D.K.Singh, and Jeeoot Singh, International Conference on Energy Environment & Material Sciences (ICE2M-2019) IEEE Conference ID 48764 held during December 1-3, 2019.

53. Process Performance of EDM of Inconel 925 by using Taguchi Method, Rahul Vishwakarma, Sunil Kumar Yadav and D.K.Singh, International Conference on Energy Environment & Material Sciences (ICE2M-2019) IEEE Conference ID 48764 held during December 1-3, 2019.

54. "On the temperature analysis of magnetic abrasive finishing of Aluminium 6060 using finite element method”, Rajneesh K Singh, D.K.Singh, Swati Gangwar, Machining Science & Technology, An International Journal (Accepted July 2020) Taylor & Francis.

Participated in International/National Conferences 1. Presented Key note in International Conference on “Latest Innovations in

Engineering, Science and Management, 30th March 2019 organized by Buddha Institute of Technology Gorakhpur.

2. Presented key note in International Conference on Recent Innovation in Science & Engineering – 18, organized by Buddha Institute of Technology Gorakhpur March 31st-April 1st, 2018.

3. Presented Key Note in a Conference on National Conference on Advances in Manufacturing Technology, NCAMT2013 on 23-24 May 2013 at NITTTR Chandigarh.

4. Presented Key Note Paper titled “ Micro Machining by Magnetic Abrasive” National Conference on Emerging Trends in Mechanical Engineering ETME-2011” held during Sptember 17-18, 2011 at FET-RBS, Agra.

5. Presented a paper on “Surface roughness and surface texture generated by Pulsating Flexible Magnetic Abrasive Brush”,ASME World Tribology Congress, September 12-16, 2005 Washington DC, USA.

14

6. Presented a Paper on “Experimental Investigations into Magnetic Abrasive Finishing of Alloy Steels” in International Conference on Leading edge Manufacturing, held at Niigata, Japan during November 3-6, 2003.

7. Participated in First National Conference on “Precision Engineering” organized by Mechanical Engineering Department, Indian Institute of Technology Madras, Chennai held during Jan 12-13, 2000.

8. Participated in “20th All India Manufacturing Technology Design and Research Conference” at BITS Ranchi, Dec 13-15, 2001.

Peer Reviewer Journal of Material Processing Technology, Elsevier Publication since

2006. Internal Journal of Advanced Manufacturing Technology, Springer Verlog

Publication since 2006. iMECH E-Part-B, Journal of Engineering Manufacture. SAGE Publication UK

since 2014 International Journal of Precision Technology (IJPTECH), InderScience

Publishers since 2015 International Journal of Manufacturing Technology and Management

(IJMTM), InderScience. International Journal of Manufacturing Technology Research (IJMTR). All India Machine tool, design and research 2010. IEEE Sponsored Conference titled: “Students’ Conference on Engineering

and Systems (SCES-2012)" from March 16 to 18, 2012 at Motilal Nehru National Institute of Technology (MNNIT), Allahabad, UP.

Invited Lectures/Talks 1. Key note in National Seminar on Advances in Materials, Manufacturing and

Renewable Energy Systems, August-17-18, 2018 at BBD National Institute of

Technology and Management, Lucknow.

2. Commercialization of Innovative Ideas, Kalam Centre for Innovation and incubation

of Start-Ups! (AKTU Lucknow) At Buddha Institute of Technology, Gorakhpur on

09th August 2018.

3. Delivered in Inspire Science Camp-an initiative of DST, organized by Sagar Intitute of

15

Technology and Management, Barabanki (UP) on 18-04-2018.

4. Micro to nano finishing by Magnetic abrasives, Short term course on Computation &

Challenges of Manufacturing in Mechanical Engineering, held during March 19-25th

2018, MED, MMMUT Gorakhpur.

5. Short term course on Advances in Design and Manufacturing (ADM-2016) organized

by Mechanical Engineering Department, MMMUT during July 4th-10th 2016 under

TEQIP-II

6. Experimental aspects of Magnetic Abrasive Finishing Process Short Term Course on "Micro manufacturing" during June 29, 2015 to July 03, 2015 organized by Mechanical Engg.Deptt., Indian Institute of Technology Kanpur.

7. Micro to nano abrasive finishing, Short Term Course entitled “Micromanufacturing: Materials, Processes and Systems (MMPS-2014)” during June 17-21, 2014 at MED, MNNIT, Allahabad.

8. Micro Manufacturing by FMAB, BARC & QIP sponsored course on “Micro Manufacturing” held during 01st April 2014 at Indian Institute of Technology Kanpur.

9. Key note speaker in National Conference on Advances in Manufacturing Technology, organized by NITTTR Chandigarh May 23-24, 2013.

10. Delivered lecture in National Symposium on Miniature Manufacturing in 21st Century (NSMMIC 2013) organized by Mechanical Engineering Department, IIT-BHU held during August 16-18, 2013.

11. Micro manufacturing by Magnetic Abrasive, BARC & QIP sponsored course on “Micro Manufacturing” held during November 5-9, 2012 at Indian Institute of Technology Kanpur.

12. Advanced Techniques of shaping advanced & Smart Materials, Proceeding of AICTE Sponsored National Seminar on “Active& Smart Materials” held during March, 23-24, 2012 organized by Department of Applied Science (Physics), Madan Mohan Malaviya Engineering College, Gorakhpur, pp 10-11, ISBN 938206210-6.

13. BARC & QIP sponsored course on “Micro Manufacturing” held during September 30-October 4, 2011 at Indian Institute of Technology Kanpur.

14. Ajay Kumar Garg Engineering College, Ghaziabad during August 02, 2011. 15. BARC sponsored course on "Micromanufacturing using MAF being held during Sep.

02 to Sep. 08, 2010 2009 at Indian Institute of Technology Kanpur.

16

16. Mechanical Engineering Department, GLA Mathura, Delivered lecture on Advanced Fine Finishing Processes, on 02-12-2009 to Final Year Mechanical Engineering Students.

17. Mechanical Engineering Department, BSA College of Engineering & Technology, Agra, Delivered lecture on Advanced Fine Finishing Processes, on 02-12-2009 to Final Year Mechanical Engineering Students

18. DST & BARC sponsored course on Micro Machining held during July 20-July 25, 2009 at Indian Institute of Technology Kanpur.

19. BARC & AICTE Sponsored Short Term Course on “Micromachining” held during October, 7-11, 2008 at Indian Institute of Technology Kanpur (India)

20. AICTE Staff development Programme on CAD/CAM Applications in product development and manufacturing held during June 16-27, 2008 at MNNIT Allahabad (India).

21. TEQIP sponsored workshop on “ Nano Technology” organized by Electronics & Communication Engineering Department, M.M.M.Engineering College, Gorakhpur held during April 5-6,2008

22. QIP Short Term Course on “Introduction to Micro Manufacturing Technologies” held during February, 24-28, 2008 at Indian Institute of Technology Gwuahati (India)

23. QIP Short Term Course on “Micro Machining” held during October, 25-29, 2005 at Indian Institute of Technology Kanpur (India)

24. QIP Short Term Course on “Advanced Machining Processes” held during October, 18-23, 2004 Indian Institute of Technology Kanpur (India).

State-of-the-art Training 1. Carried out 15 days State-of –Art research in the area of Manufacturing Science at

Indian Institute of Technology Kanpur in the month of October/November 2007.

2. AutoCAD-2009 by Autodesk.

Books Published 1. Proceedings of National Conference on Futuristic in Mechanical Engineering FME-

2014, Year of Publication March 2014. 2. Book Chapter on “Micro Manufacturing by Magnetic Abrasive” Taylor & Francis,

USA.2013 3. Emerging Trends in Mechanical Engineering

ISBN 93-80043-39-2 Publisher : Excel India Publishers, New Delhi Year of Publication: 2009, Editor

4. Labs Training for Technical Supporting Staff

17

Year of Publication: March 2009, Editor 5. Composite Materials & Processing Year of Publication: 2008, Editor 6. Advanced Manufacturing Technology, Year of Publication: 2006, Editor

Organized Conferences/ Workshops/ Schools 1. Six weeks Summer Internship Program in Mechanical Engineering June 01 to July

13, 2018 Department of Mechanical Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur.

2. 30th National Convention of Mechanical Engineers & National Seminar on Green Technology organized by Institutions of Engineers held on September 27-28, 2014 as Co-Convener.

3. National Conference on “Futuristic in Mechanical Engineering” FME-2014 held during March 8-9, 2014.

4. Organized a Staff Development Programme under TEQIP on “Technical Art” for the Staff of the Mechanical Workshop held during April 22-23, 2013. Resource Person: Mr.Phool Chand. TA LAB, IIT Kanpur.

5. National Conference on “Emerging Trends in Mechanical Engineering” ETME-2011 Organized by FET-RBS, Agra held during September 17-18, 2011.

6. Organized a AICTE & TEQIP Sponsored National Conference on “Emerging Trends in Mechanical Engineering” ETME-2009 held during October 12-13, 2009.

7. Organized a short term Practical Course on “Workshop on Labs Training for Technical Supporting Staff”in a Staff Development Programme held during March 20-22, 2009& sponsored by Technical Education Quality Improvement Programme, Govt. of India.

8. Organized a short term Practical Course on “Technical Art” in a Staff Development Programme for the staff of the Mechanical Workshop held during July 14-18, 2008 and sponsored by Technical Education Quality Improvement Programme, Govt. of India.

9. Organized a short-term course on “Composite Materials and Processing” held during March 15-16, 2008 sponsored by World Bank Assisted Technical Education Quality Improvement Programme (TEQIP).

10. Organized a short-term course on “Advanced Manufacturing Technology” held during Feb, 27-28, 2006 sponsored by World Bank Assisted Technical Education

18

Quality Improvement Programme (TEQIP).

Courses Taught S. N. Course Title Level 1. Workshop Technology UG (First year) 2. Manufacturing Science-I UG (second year) 3. Manufacturing Science-II UG (Third Year) 4. Unconventional Manufacturing Processes UG (Fourth Year) 5. Project Management UG (Fourth Year) 6. Mechanical System Design UG (Fourth Year) 7 Computer Aided Manufacturing UG/PG 8 Advanced Manufacturing Technology PG 9 Machining Science PG 10 B.TechProject UG 11. M.Tech Thesis Dissertation PG

Short term Courses/Workshop attended 1. Workshop on “ CYBER SECURITY AND ITS RELEVANCE IN DIGITAL INDIA” 7-8th

September 2018 organized by Department of Information Technology & Computer Application & Department of Computer Science, MMMUT Gorakhpur.

2. Professional Development Trainings, IIM SHILLONG, 31st October-1st

November 2017.

3. Curriculum review- Mechanical Engineering sponsored by TEQIP-2

organized by Mechanical Engineering Department, MMMUT Gorakhpur

June 15th-16th 2015.

4. FDP sponsored by TEQIP on “Engineering Education in 21st Century” organized by Engineering Staff College, Hyderabad held during June 2-6, 2013.

5. FDP Sponsored by TEQIP on “Management Capacity Enhancement Programme for administrators” organized by Indian Institute of Management Lucknow-Noida Campus held during August, 19-23, 2014

6. Workshop on “Outcome based Accreditation System”, Organized by National Board of Accreditation, New Delhi held at Delhi Technological University during 21-22

19

September 2012. 7. One day Workshop on “Quality Improvement Programme” organized jointly by AICTE,

New Delhi &IIScBagalore held on September 11, 2012. 8. Workshop on “Mechanism to Map Industry Linkages of Institutes” AICTE-CII University

– Industry Congress 2012 held on 26th July 2012 at Indian Habitat Center, New Delhi. 9. BARC & QIP sponsored course on “Micro Manufacturing” held during September 30-

October 4, 2011 at Indian Institute of Technology Kanpur. 10. DST & BARC sponsored course on “Micro Machining” held during July 20-July 25, 2009

at Indian Institute of Technology Kanpur. 11. Quality Improvement Programme (QIP) School on Micro Manufacturing held during

February 24-28, 2008 at Indian Institute of Technology Gwuahati. 12. QIP Sponsored School on “Micromachining” held during October 25-29, 2005 at IIT

Kanpur. 13. QIP Sponsored School on “Advanced Machining Processes” held during October 18-23,

2004 at IIT Kanpur. 14. Department of Science & Technology sponsored 3rd SERC School on“Precision

Engineering” at Indian Institute of Technology Kanpur, June 10-19, 2002. 15. QIP sponsored course on“Business Intelligence for Decision Making: Neural Network,

AHP & Fuzzy Logic”, May 21-25, 2001 at I.I.T. Kanpur. 16. Participated in “20th All India Manufacturing Technology Design and Research

Conference” at BITS Ranchi, Dec 13-15, 2001 17. Participated in First National Conference on “Precision Engineering”at Indian Institute

of Technology Madras, Chennai, Jan 12-13, 2000. 18. Continuing Education Programme short-term course on “N.C. Machine Tools and Part

Programming” at I.I.T.Kanpur, Sept 21-26, 1998. 19. DST Sponsored SERC School on“Advanced Manufacturing Technology”, at Indian

Institute of Technology Delhi, Nov 2-14, 1998. 20. Summer School on “Surface Engineering” at Indian Institute of Technology Kharagpur,

June 21-July 3, 1993. 21. Summer School on “Finite Element Method for Mechanical Engineering” at REC Surat,

June 7-19, 1993.

Ph.D. Supervision 1. Mr.Rakesh Kumar Singh, Lecturer, MIET, Meerut under Progress

20

on“Experimental Investigations into Electrochemical Spark Machining of non-conducting materials” U.P.Technical University Lucknow.

2. Arun Pratap Singh, Lecturer, Latest Trends in Electric Discharge Machining, U.P.Technical University Lucknow

3. Rajneesh Kumar Singh, Research Scholar, MED, MMMUT Gorakhpur 4. Ms Roopa Singh, Research Scholar, MED, MMMUT Gorakhpur 2018 on

wards 5. Mr.Sunil Kumar Yadav, Assistant Professor, MED, MMMUT Gorakhpur

2018 onwards.

M.Tech. Supervised 14 Completed 02 Under Progress

Academic Interactions with Other Institutions/R&D 1. Oklahoma State University, Still water, Oklahoma, USA 2. Space Application Center, ISRO Ahamdabad. 3. Indian Institute of Technology Kanpur. 4. Indian Institute of Technology Guwahati. 5. Motilal Nehru National Institute of Technology, Allahabad. 6. Harcourt Butler Technological Institute, Kanpur. 7. Punjabi University, Patiala. 8. Institute of Engineering & Technology Lucknow. 9. Kamla Nehru Institute of Technology, Sultanpur. 10. Public Service Commission, Allahabad 11. Punjab Technical University, Kapurthala 12. Punjab University, Chandigarh 13. Govt. Engineering College, Karad, Maharastra

Editorial Board Member Member, Editorial Board, ISST-IJME. Associate Member, Scientific Council, Rio’s International Journal (ISSN 1982-6443) on

Sciences of Industrial and Systems Engineering and Management, Brazil Life Member ISTE

Academic Foreign Visits Japan USA North Africa

Research Interest: • Advanced Manufacturing Technology • Computer Controlled Manufacturing Processes

21

• Machining Science • Computer Aided Process Planning (CAPP) of Manufacturing Processes

(Conventional/Unconventional) • Application of Robust Design & Design of Experiments in Engineering

• Quality Engineering

Knowledge of PC/Software 1. MS Office (Word, Excel, PPT) 2. MATLAB 3. MINITAB 4. STATISTICA 5. MATHEMATICA

Remarks Offered one month training in state of art Laboratory of Mechanical & Aerospace

Engineering Department, Oklahoma State University, OK, USA under the supervision of Dr. Prof. RangaKomanduri.

Convener World Bank TEQIP Committee Phase-I of Department of Mechanical Engineering, M.M.M.Engineering College, Gorakhpur (India) and procured and Installed various Research Equipments in Advanced Machining Lab such as (i) CNC Lathe, (ii) ECM Setup, (iii) EDM (iv) Metallographic Microscopes etc.

Written a Chapter for Book on “MicroManugfacturing Using MAF” being published shortly by Taylor & Francis, USA

Chapter for Book on “Micromachining” being published shortly by Narosa Publishing house, New Delhi

Member, Selection Committee, Mechanical Engineering Department, Faculty of Engineering, University of Benghazi, Libya (2007).

Referee 1. Dr. Vijay Kumar Jain, Retd.Professor, Mechanical Engineering Department,

Indian Institute of Technology Kanpur-208016 (India) .E-mails: vkjain@iitk.ac.in, Cell No: +91-9336225336.

2. Dr.D.S.Chauhan, Founder Vice Chancellor, UPTU, Lucknow. E-mail: pdschaunah@gmail.com, Cell No: 9557888181

3. Dr. Pradeep Kumar, Professor,Mechanical& Industrial Engg. Deptt. Indian Institute of Technology, Roorkee (India). E-mail:kumarfme@iitr.ernet.in, +91-1332-285602, Fax No.+91-1332-273560

22

4. Dr. V. Raghuram, Principal Scientific Officer, Mechanical Engineering Department, Indian Institute of Technology Kanpur-208016 (India). E-mail:vraghu@iitk.ac.in, Tel No. +91-512-2597434, Fax No. +91-512-2597408.

January, 2020 Signature Place: Gorakhpur