Diy jewelry making accessories handmade bead jewelry bangle

Download Diy jewelry making accessories handmade bead jewelry bangle

Post on 26-Jul-2015

107 views

Category:

Design

2 download

TRANSCRIPT

1. DIY Jewelry Making Accessories-Handmade Bead Jewelry Bangle Im always looking for handmade bead jewelry with an energetic and vivid summer palette, so I chose these yellow beads as the main color for my DIY jewelry making accessories. Whats more, for the sake of a more comfortable piece to wear, I made use of nylon wire besides the necessary beads and clasps. You guys will actually go crazy about it. Supplies for this handmade bead jewelry: 8mm Acrylic Pearl Bead 6mm & 4mm Bicone Glass Bead 3mm Round Seed Bead Crimp Bead Iron Bead Tip Lobster Claw Clasp with ending chain 0.5mm Nylon Wire Round Nose Plier Flat Nose Plier Side Cutting Plier How to make this DIY jewelry making accessories? Step 1: work a beaded strand 1. Snip an 80cm long wire. Thread a crimp bead to the center of the wire, and then pass the two ends together through the bead tip. Flatten the crimp bead and close the bead tip. 2. Slide one 4mm Bicone Glass Bead onto the two ends. 3. Separate the two ends, on the left end add one 8mm Acrylic Pearl Bead, then on the right end add the beads as follows: 3mm Seed Bead x3, 6mm Bicone Glass Bead x1 and 3mm Seed Bead x3. Finally, cross two ends through another piece of 3mm Seed Bead. 4. Exchange the added bead group for two ends and then cross at one extra seed bead. Want to learn some new methods to whip up creative DIY jewelry making accessories? Here, make a handmade bead jewelry bangle in one hour or less with the help of this tutorial. 2. 5. Do the above two beaded patterns alternatively for the desired length. 6. Lead the two ends through one 4mm Bicone Glass Bead. Slide on the bead tip and then secure with a crimp bead as before. 7. Cut off the remaining wires. Step 2: make the bangle 1. Take a 50cm long nylon wire. 2. Affix the wire through one of the beginning4mm Bicone beads. Take the rest of the wire and pass through the 6mm Bicone Glass Beads one after one. Leave the wire as is. 3. When finished passing though all beads on the edges, tie a knot at the end. 4. Tuck the ends of the wire in the adjacent 2 or 3 beads and remove any excess parts. 3. Step 3: add on clasp Attach the two parts of the clasp onto the ends. See, here is your handmade bead jewelry! This is my handmade bead jewelry bangle, so simple but gorgeous, right? All in all, simply be aware of the trends and let them provide you with more inspirations for your DIY jewelry making accessories. Enjoy trying out this design! Search for array of beads and charms please click: http://www.pandahall.com/