discribtion of safety and health work competency : applying of safety and health work
TRANSCRIPT
DISCRIBTION OFSAFETY AND HEALTH WORK
Competency :
APPLYING OF SAFETY AND HEALTH WORK
Teknologi dan Rekayasa
STUDENTS CAN DESCRIBING OF WORK SAFETY AND HEALTH
KNOW CAN TYPE WORK SAFETY AND HEALTH
OBJECTIVE
THE LAW AND REGULATIONS ON SAFETY AND HEALTH WORK
1. About Term 2. Scope 3. Terms - Safety Requirements 4. Guidance 5. Development Committee Occupational
Safety and Health 6. Accidents and How to Report 7. Liabilities and Labor Rights 8. Obligations when entering the
workplace 9. Liability Management
Teknologi dan Rekayasa
1. No. Act. 1 of 1970 on Occupational Safety
1. Definition 2. Accident Reporting Procedures 3. Inspection Accident 4. Sanction 5. Supervision 6. Closing Provisions
Teknologi dan Rekayasa
2. Regulation of the Minister of Manpower No.. 03/MEN/98 on Procedures Accident Reporting and Examination
1. General Provisions 2. Goals and Targets K3 Management System
K3 3. Management System Implementation 4. K3 Management System Audit 5. Authority of Director 6. Audit Implementation Mechanism 7. Certificate K3 8. Guidance and Supervision 9. Financing
Teknologi dan Rekayasa
3. Regulation of the Minister of Manpower No.. PER.05/MEN/1996 of Safety Management System and Occupational Health
BASIC CONCEPTS OF K3
Teknologi dan Rekayasa
WO BIGGEST PROBLEMS CAUSE ACCIDENTS WORK
The objective of education occupational safety and health is to prevent accidents
Unsafe behavior
Environmental conditions are not safe
Teknologi dan Rekayasa
The purpose of safety and health Protect your health manpower, improve working efficiency, prevent the occurrence of occupational accidents and diseases
Should set placement assistant
VARIOUS PURPOSES K3
Teknologi dan Rekayasa
1. Anticipating the existence of the factors causing hazards and take reasonable precautions before.
2. Understanding the types of hazards in the workplace
3. Evaluating the level of danger in the workplace
4. Controlling the occurrence of danger or complications.
HOW TO CONTROL HEALTH THREAT AND HAZARD WORK
Teknologi dan Rekayasa
Control techniques: changing work procedures, closing isolating hazardous materials, using automation work, using wet workings and ventilation air changes
Administrative control: reducing the exposure time, arrange health and safety rules, wearing protective equipment, installing warning signs, make a list of materials data is safe, do penangganan system emergency training
Monitoring health: health checks
LIABILITY COORDINATING FOR K3
Teknologi dan Rekayasa
• Improving health manpower
• Realize and explain the dangers
• Establishing P2K3
• Health report
• Provide protective equipment
• Fire-fighting units formed
BASIC SAFETY
Teknologi dan Rekayasa
A condition or action that can cause human losses, property, and environment
A measure of the state likelihood and severity of a loss due to
Unwanted incident
THE END
Teknologi dan Rekayasa
By. Setyo Harmadi,ST SMK Muhammadiyah 3 Yogyakarta