discover your phone - philips€¦ · touch screen, namely (from left to right): home, sms message,...
TRANSCRIPT
roduct described. The device is to GSM/GPRS networks.
Long press ).
Enter the number and pressL Options and select Storenumber.
Enter the phone numberwith the keypad and press( to dial.
Press ).
Press ( when your phonerings.
Press ) when your phonerings.
Press +/- using thenavigation keys during a call.
Long press 0 in idle mode.
Press - in idle mode.
Discover Your Phone
Philips continuously strives to improve its products.Therefore, Philips reserves the rights to revise this userguide or withdraw it at any time without prior notice.Philips provides this user guide "as is" and does notaccept, except as required by applicable law, liabilityfor any error, omission or discrepancy between this
user guide and the pmeant to be connected
How to...
Alphanumerickeypad
Main screen
Pick up key
Hang up, canceland on/off key
Back of the phone: speaker & camera lens
Left softkeyRight softkey
Headset/Charger connector
Stylus
Center key
Navigationkey
Switch the phone On/Off
Store numbers in Phonebook
Make a call
End a call
Answer a call
Reject a call
Adjust earpiece volume
Switch to meeting mode
Access the Contact
1
anent hard icons at the bottom of theely (from left to right): Home, SMS
s and On-screen keypad. Message icon to enter the SMS
acts icon to enter the Contacts
een keypad icon to open the on-ereby you can tap to enter numbers.
en
lus pen supplied with your product is you can use when tapping the touchuse any other tool on the touch screen.
ne features a touch screen that can be stylus pen. You can select an item,
down or select a few items
carry out screen calibration in orderccuracy when using it with the styluster of the symbol with the stylus untilappears on screen.
Softkeys
The left Land right R lsoft keys located at thetop of the keypad allow you to select thecorresponding options that appear on the screenimmediately above them, including during calls. Thefunctions associated with these keys will varyaccording to the current context.
Hard iconsThere are 4 permtouch screen, namMessage, ContactTap on the SMSMessage editor. Tap on the Contmenu.Tap on the on-scrscreen keypad, wh
Touch Scre
Warning! The stythe only tool thatscreen. Do NOT
Your mobile phoselected with themove up and simultaneously.
CalibrationIt is advisable to to obtain better apen. Tap the cenCalibration done
Access Dual SIM menu
Press + in idle mode.
Access SMS editor Press > in idle mode.
Access Quickcall Press < in idle mode.
Access the Call list Press ( in idle mode. TheCall list displays the Callsmissed, the Calls received andthe Calls dialled.
Access the Main Menu
Press L Menu in idlemode.
Return to previous menu
Press R.
Quickly return to idle
Press ).
Main Menu Press L in idle mode to access the Main Menu andeys of which the directions are
ser guide as -, +, < or > to browseithin lists, press L to access
d with the selected item, press one level.
2
Presented in the form of a grid, the Main Menuenables access to the various features available in yourmobile phone. The table above summarises thearrangement of the Main Menu.
use the navigation krepresented in this uthe icons and lists. Wthe options associateR Back to go back
Entertainment Op. Services Camera
page 18 page 20 page 23
Tools Messaging My Files
page 27 page 32 page 40
Call Info Contacts Settings
page 42 page 45 page 49
3
tstainment ........................................... 18 .............................................................. 18e Characteristics
hina and HK only) .............................. 19ervices ............................................... 20rvices .................................................... 20................................................................. 20ra .......................................................... 23o... .......................................................... 23a menu ................................................. 24 ............................................................... 27izer ......................................................... 27 clock ..................................................... 28 clock .................................................... 28ator ........................................................ 29d ............................................................. 29 converter ........................................... 30witch On / Off ................................... 31ll ............................................................. 31
Table of conten1. Getting Started ............................................5
Inserting the SIM card ......................................5Switching on the phone ...................................6Charging the battery ........................................7Setting Hotkeys .................................................8Dual SIM ..............................................................8
2. Calling ................................................................9Make a call ..........................................................9Answer and end a call ......................................9Call handsfree ................................................. 10Options during a call ..................................... 10Adjust the earpiece volume ......................... 10Quickcall .......................................................... 10Make an emergency call ............................... 11MMS Foto talk ................................................ 11Handling multiple calls .................................. 11
3. Text Entry ................................................... 14T9® text input ................................................ 14Basic text input ............................................... 15Handwriting recognition .............................. 16On-screen keyboard input ........................... 17
4. EnterGamesChines(for C
5. Op. SOp. SeWAP
6. CameHow tCamer
7. ToolsOrganAlarmWorldCalculInfrareMoneyAuto SFirewa
8. Messaging ..................................................... 32 12. Settings ....................................................... 49............................................... 49............................................... 50............................................... 50............................................... 51............................................... 51............................................... 51............................................... 52............................................... 53............................................... 53............................................... 54 ............................................ 57
............................................... 58
........................................... 63
c Accessories .............. 65
ion Rate ............................................... 66
aration ............................. 67
y .......................................... 68
onformity ...................... 71
4
Create Message .............................................. 32Inbox ................................................................. 34Outbox ............................................................. 35Drafts ................................................................ 35Templates ........................................................ 35Spam SMS Box ................................................ 35Archive ............................................................. 36Broadcast SMS ................................................ 36Settings ............................................................. 37My dictionary .................................................. 39
9. My Files .......................................................... 40Picture album .................................................. 40Sound album .................................................... 40Memory status ................................................ 41
10. Call Info ...................................................... 42Call list .............................................................. 42Settings ............................................................. 42Counters .......................................................... 44
11. Contacts ..................................................... 45Contacts list .................................................... 45Settings ............................................................. 46Edit and manage contacts ............................. 46
Sounds ...............Display ...............Time and date ..Dual SIM ............Autonomy .........Profiles ...............Shortcuts ...........Language ............Security .............Network ...........
Icons & symbolsPrecautions ........
TroubleshootingPhilips AuthentiSpecific AbsorptInformation ........
Trademark declLimited warrantDeclaration of c
5
batteryattery, pull up the battery cover fromer.
l your personal settings if you remove the phone is switched on.
Getting Started
1. Getting StartedCongratulations on your purchase and welcome toPhilips!To fully benefit from the support that Philips offers,register your product at www.philips.com/welcome.
Please read the safety instructions in the "Precautions"section before use.
To use your phone, you must insert a valid SIM cardsupplied by a GSM operator or retailer. The SIM cardcontains your subscription information, your mobiletelephone number, and a memory in which you canstore phone numbers and messages (for moreinformation, see “Contacts” on page 45).
Inserting the SIM cardFollow the steps below to insert your new SIM card.Remember to switch off your mobile phone beforeremoving the back cover.
Remove the back coverTo insert the SIM card, you must first remove theback cover. Press on the back cover and then slide thecover downwards as shown below.
Remove the To remove the bthe top left corn
You may lose althe battery when
Getting Started
Insert the SIM card Replace the back coverer by sliding it down into its slot,
ve film covering the screen ande using the phone.
he phoneone, long-press ) key. Enterred. A PIN code is a 4- to 8-digitIM card. It is preconfigured and by your operator or retailer. For
n PIN codes, see “Security” on
6
Insert the SIM card into one of the two SIM card slots.If you only have one SIM card, insert it into SIM 1 slot(default slot). Make sure that the clipped corner of thecard is in the correct corner and that the gold contacts arefacing down.
Replace the batterySlide the battery into its slot, metallic connectorsfacing downwards, until it stops. Then lock it bypushing it downwards.
Replace the back covuntil it stops.
Remove the protectithe camera lens befor
Switching on tTo switch on the phthe PIN code if requisecret code of your Scommunicated to youmore information opage 53.
7
wn below. Then plug the other endpower socket.
bol indicates the state of charge., the charge indicators will scroll; ithours to fully recharge your mobilel the scroll bars are steady, the batteryYou can then disconnect the charger.he network and condition of use, talk 8 hours and stand-by time up to 1
arger plugged to the mobile phone is fully charged will not damage the
Getting Started
If you enter an incorrect PIN code three times, yourSIM card will be blocked. To unblock it, you mustrequest the PUK code from your operator.
When you switch on your mobile phone with yournew SIM for the first time, you will be asked for thefollowing:
Charging the batteryYour phone is powered by a rechargeable battery. Anew battery is partially charged and a sound alert willwarn you when the battery reaches low, if the batteryalert is On (see “Display” on page 50).Once the battery and battery cover are back in place,you can charge the phone. Pull away the protectiverubber cap covering the charger connector. Plug in the
connector as shointo a main AC
The battery symDuring chargingtakes around 4 phone. When alis fully charged. Depending on ttime goes up tomonth.Keeping the chwhen the batterybattery.
Set date To set the current date.
Set time To set the current time.
See “Settings” on page 49 for details on these twoitems.
Getting Started
The only way to turn off the charger is to unplug it,
8
so use an easily accessible AC power socket.
Setting HotkeysYou can configure the numeric keys 2 to 9 toaccess your favourite features simply by long-pressingon the numeric key. A number of hotkey shortcuts arepre-configured. For more information, see “Hotkeys”on page 52.
Dual SIMThe dual SIM feature in 9@9v mobile phone allowsyou to install two different SIM cards into one mobilephone. You can switch between two numbers/networks.
9
a only)P dial. When you select IP dial option,e will automatically add the IP specialpreset by you in front of the phonen make the IP call. You can also longtivate IP dial.
d end a calla call, the number of the caller may beding on whether or not the personen to display his or her ID. If the in the selected phonebook, then the
name is displayed instead of the
all: press ( or choose from the
: press ). If you have activated Callpage 43), the call is diverted to ace mail.s ) or switch off the phone.
ot ring if in Silent mode (see page 49).
ted Any Key Answer, you can accept any key except ) (see page 42).
Calling
2. CallingMake a call
From the idle screen1. In idle mode, enter the phone number using the
keypad. To correct an error, press R Cancel.2. Press ( to dial.3. Press ) or R End call to hang up.To make an international call, long press * to enterthe "+" sign for the international prefix.
Using the phonebook1. Press - in idle mode.2. Select a contact from the list and press (: the
selected number is dialled. If you are using theonboard phonebook and the selected contactfeatures more than one number, the numberidentified as the default will be automaticallyselected. To select a different number, press < or >(see “Contacts” on page 45 for more information).
3. Press ) or R End call to hang up.
IP Dial (ChinYou may select Ithe mobile phonservice number number and thepress ( to ac
Answer anWhen receiving displayed, depencalling has chosnumber is storedcorresponding number.• Answer the c
menu option.• Reject the call
forward (see number or voi
• Hang up: pres
The phone will n
If you have seleccall by pressing a
Calling
Call handsfree Other options during a callto perform the following tasksg: you can access and consult theist, hang up by selecting End call, settings, send or read SMS, orthe events in the Organizer.
piece volume or - to increase or decrease the
allows you to set your four mostmbers. You can then quickly callcting the corresponding icon or.
all contactenu, select Settings > Shortcuts,
ickcall menu.
10
For your own comfort and safety, ensure that youmove the phone away from your ear when callinghandsfree, especially when increasing the volume.
1. In idle mode, enter the phone number using thekeypad or select a contact from the phonebook.
2. Press ( to switch to handsfree mode and back.
Options during a call
During a call, press L Options to access thefollowing options.
Activate h/freeThis option allows you to use your mobile phone’shands-free option.
Mute / UnmuteAllows you to mute or unmute the microphone sothat your caller cannot hear you.
NotepadAllows you to note down a number. You can thenstore it in the phonebook, dial it, or send a message tothis number.
Press L Options while a call is ongoinContacts List or Call lchange the Equalizerconsult and manage
Adjust the earDuring a call, press +volume.
QuickcallThe Quickcall featurefrequently dialled nuone of them by selepicture on the screen
Setting a Quickc1. From the main m
and enter the Qu
11
the call number. Then press ( call emergency call directly and the dial
will be displayed.
talkows you to send a picture via MMS. be selected from the Picture album or you have just taken with the camera.
ure, then press Menu, or select a pictureicture Album, then press L Options.name the picture. In both cases, select MMS.o add a sound, write a text, selectture, or access the options menu. and select a contact from the list.t to send the MMS (see “New MMS” for more information).
ultiple callshandle two or more calls at the sameake conference calls is dependent onnd/or subscription.
cond calla second call during an active call or hold. While on the phone, dial a
Calling
2. Press L Set. Select a name from the contactslist, and select a picture from the Picture album.Proceed the same way for each thumbnail.
Calling a Quickcall contactTo make a call, press < when in idle mode, go to theQuickcall menu, then select the thumbnail of yourchoice and press (.To reconfigure a thumbnail, select it and press LOptions to Change the name and/or picture.
Make an emergency callYou can make an emergency call anytime, irrespectiveof whether the mobile phone has been registered onthe network. 1. In idle mode, enter the emergency call number
(specific number in the caller's country).2. Press (.
Note that an emergency call will not be stored in thecall record.
3. Alternatively, after switching on the mobilephone and entering the PIN number, press R SOS to go to the emergency call screen. Ifthere is no SIM card, pressing R SOS can alsobring you to the emergency call screen,
displaying to make ananimation
MMS FotoThis feature allThe picture cancan be a picture1. Take a pict
from the PYou can reSend by... >
2. Press +/- tanother pic
3. Press SendPress Selecon page 32
Handling mThe ability to time and to myour operator a
Making a seYou can make with a call on
Calling
number (or select a contact from the phonebook) and Answering a third calld have one call on hold, you canll. To do so, you must either endintroduce the new caller to a
to two current communicationsn hold).
nt.
s activated by making severalom a multiple call context. Itith up to five people at the same
l with someone, then a second
d select Conference. Repeat the members are connected.
reject the call.
open the options list. You canct Accept to answer theoming call, or End call to end therent call, then answer theoming call.
12
press (. The first call is put on hold (the number isdisplayed at the bottom of the screen) and the secondnumber is dialled. You can then press L Options toaccess the following options:• Switch calls to toggle between calls.• Transfer to connect the two calls. You are
disconnected when the transfer is completed.• Conference to introduce the caller into a
conference call.
Answering a second callWhen you receive a second call while already incommunication, the phone emits a beep alert and thescreen displays Call waiting. You can then:
To receive a second call, you must have deactivatedCall forward for voice calls (see page 43) and activatedCall waiting (see page 42).
If you are in a call analso receive a third caone of the calls or conference.
This service is limited(one active and one o
Conference callSubscription depende
A conference call ioutgoing calls or frallows you to speak wtime. 1. Make a first cal
call (see above).2. Press Options an
process until five
Press ( To answer the call (the first one isput on hold).
Press ) To reject the call.
Press L Options
To open the options list. You canselect End call to end the currentcall, then answer the incoming call.
Press ) To
Press L Options
To seleinccurinc
13
Calling3. Select Remove party to disconnect a member ofthe conference, or select Private call to have aprivate call with this member only (othermembers are put on hold).
4. Press ) to disconnect all calls at once.If there is an incoming call during the conference calland there are less than five members, you can acceptthis new call and add this member to the Conferencecall (if five members are already connected, you cananswer the call, but not add it to the conference).
Text Entry
How to use it? represented by each key are as
nter the word "home": 3. The screen displays the
st: Good.o scroll and select Home.
selection of the word Home.
in letters.
wse the list of candidate words.
the selected word followed by a
press to backspace, long press tol text.
ift case: Standard, lower orCASE letters.
press to open the languages listhange the language for text. Short press to open numeric
ress to toggle input mode fromo basic text input. Short press tombols table.
14
3. Text EntryYour mobile phone supports a number of text editingmodes, including Handwriting input, Pinyin input,Stroke input, English input, Numeric input andSymbol input.
You can toggle between handwriting recognitionmode, on-screen keyboard input mode and keypadinput mode. Tap to enter the handwritingrecognition mode. Tap to enter the on-screenkeyboard input mode. Tap to enter the keypadinput mode.
T9® text inputT9® Predictive Text Input is anintelligent editing mode for entering texton a mobile phone. It allows you to entertext more quickly by anticipating theword you want to enter based on the
keys you have pressed. You press once on the keycorresponding to each letter needed to spell a wordand T9® suggests a word based on your keystrokes. Ifseveral words are available, the first word in the list isdisplayed and highlighted. Press + / - or L tobrowse the list and press > to insert the word.
Letters and symbolsfollows:
Example: how to e1. Press 4 6 6
first word of a li2. Press + or L t3. Press > to confirm
Tegic Euro. Pat. App. 0842463
2 to 9 To key
L or+ / -
To bro
1 or > Insert space.
R Short clear al
0 To shUPPER
# Long and ceditionmode.
* Long pT9®, topen sy
15
Long press
, @ / : ; " ’ ! ¡ ? ¿ # + > ( ) & £ $ ¥ 1
ä å æ ç 2
è ∆ Φ 3
ì 4
5
ñ ò ö 6
β Π Θ Σ 7
ù 8
ø Ω Ξ Ψ 9
t case: Standard,or UPPERCASE 0
the numeric mode. Change the language used
for text editing.
en symbols andtion mode.
To shift mode: T9 or basic text
input.
Text Entry
LanguageYou can switch input language while writing amessage. Press L OK and select input languagefrom the options list. The available languages willdepend on where you purchased your mobile phone.
Basic text inputLong press * to switch from T9® to basic text input.This method requires multiple key presses to reach thedesired character: the letter "h" is the second letter onkey 4, so you must press it twice to enter "h". Shortpress R Cancel to clear one entry, long press to clearall text.
Example: how to enter the word "home":Press 4, 4 (GHI) 6, 6, 6 (MNO), 6 (MNO),3, 3 (DEF). Press L OK when the message iscompleted and go to the next step.Letters, numbers and symbols are located on each keyas follows:
Short press
1 space 1. - * = % <
2 a b c 2 à
3 d e f 3 é
4 g h i 4 Γ
5 j k l 5 Λ
6 m n o 6
7 p q r s 7
8 t u v 8 ü
9 w x y z 9
0 To shiflower letters.
# To open
* To oppunctua
Text Entry
Handwriting recognition • Send to multiple: choose several recipients and send
und files to your text.pictures to your text.the text as draft.itch between languages during
ples describe the handwritingfor Chinese characters, Englishumbers.
aractersse character on the touch screen pen . recognized result in the input
ore Chinese characters, press n icons. Choose one of the the input line and tap it ton the input area.
tersr the English letter input mode. letter on the touch screen with. The system can differentiatend lower case. You do not needre you write.
16
In handwriting recognition mode, you can enterChinese characters, English letters, numbers, symbols(including punctuations) by means of handwritingrecognition.1. Tap the hard icon on the on-screen keypad.2. Tap on the top right corner of the touch
screen to enter the handwriting recognition mode. 3. Write the text with your stylus pen. The system
will recognize your handwriting automaticallyand show the recognized result in the input area,with the proposed candidate charactersdisplayed.
4. If the recognized result is not the character youdesire, choose one from the candidate charactersand tap it to replace the one in the input area.
5. You can press to delete the character orsymbol on the left of the cursor in the text area.Long press will clear all contents on the leftof the cursor in the text area.
6. Tap to enter symbol and number inputmode.
7. After you have finished writing, press L OK toaccess the following options:
• Send: choose a recipient and send your message.
the message.• Add sound: insert so• Add graphic: insert • Save as draft: save • Input language: sw
text editing.The following examrecognition process letters, symbols and n
Input Chinese ch1. Write the Chine
with your stylus2. You will see the
area.3. To check for m
or on-screecandidates fromreplace the one i
Input English let1. Tap to ente2. Write an English
your stylus penbetween upper ato shift case befo
17
keyboard input mode has 3 tabs, input Chinese characters, Englishols and numbers. The method forh characters, Chinese characters,puts, and line breaks are exactly theder Handwriting recognition mode.e section “Handwriting recognition”ore information.
nyin keyboard (for Simplified
characters on the screen to composeination, the corresponding list ofters will be displayed on the screen.
e the list of candidate letters using n icons. They are needed when theters cannot be displayed in one line
and arrows to scroll the pages.that you wish to input is displayed int, you can tap the character directly
pen to display it in the editor.
mbol and numeric keyboard and numeric icon on the on-screent the symbol or number on the editor the screen.
Text Entry
3. You will see the recognized result on the inputarea.
4. To check for other English letters, press or on-screen icon. Choose one of the candidatesfrom the input line and tap it to replace the onein the input area.
Input symbols and numbers1. Tap to enter symbols and numbers input
mode. Tap to go back to the message.2. Tap a symbol or number on the touch screen
with your stylus pen.3. You will see the recognized result in the input
area.Space InputTap to insert a space after the cursor.
On-screen keyboard input
On-screen English keyboardYou can input 26 English letters, 10 numbers andother symbols under this mode. Tap the letter ornumber on the screen and the editor will display theletter or number you have tapped. Under the Englishinput mode, you can tap or on the screen toswitch between upper case and lower case letter.
The on-screen allowing you tocharacters, symbentering Englissymbols, space insame as those unPlease refer to thon page 16 for m
On-screen PiChinese)Tap the Chinesea pinyin combcandidate characYou can navigatand on-screecandidate characspace. Tap the If the character the candidate liswith your stylus
On-screen syTap the symbolkeyboard to inpuand display it on
Entertainment
The keys used are as follows:
ed to use the navigation keys tofeed it with eggs. The more eggsnger it will grow, and the higheret. You will lose the game if thell or itself.follows :
move the racket left or right.
start the game by throwing thel left or right.
pause the game for up toinutes. (after which the screenrns to idle mode and the gamest).
move the snake up.
move the snake down.
move the snake left.
move the snake right.
pause the game for up toinutes. (after which the screenrns to idle mode and the game is).
18
4. Entertainment
Western Horoscope, Lunar Calendar and ChineseFestival features are available only in the Chineselanguage menu (see page 19). Your phone may or maynot have the Chinese Language menu depending onwhere the phone was purchased.
GamesThis phone features games that are pre-installed inyour mobile phone. Press L to enter the mainmenu from idle mode and select Entertainment >Games.
Brick GameThe goal of this game is to destroy bricks by hittingthem with a ball. Destroying all bricks give you accessto the next level.
Snake GameIn this game, you nemove the snake and the snake eats, the lothe marks you will gsnake touches the waThe keys used are as
4 and 6 To
* and # To bal
0 To 2 mretuis lo
2 To
8 To
4 To
6 To
0 To 2 mretulost
19
scopes you to display your horoscope foro consult your horoscope, you mustyour sign or your birth date. If youyou can select it from the Select sign select Set birth date, press L and date. Press L to display then.
menu, you can select Today or Othern the horoscope you want to consultase, enter the relevant date before
valms you of the next major Chineseiven date. Select A day from now or
te and enter the date from which youhat Chinese festivals will occur. InL to display the next six festivals.
Entertainment
Chinese Characteristics (for China and HK only)
Lunar CalendarThis menu gives you the correspondence betweenGregorian and Chinese calendars by displaying thecorresponding date in lunar mode from a selectedGregorian date.
Features requiring date & time information (e.g.organizer events) depend
on Gregorian dates only.
Lunar in idleThis option allows you to display the lunar calendar inidle screen. Select On or Off to activate or deactivatethis option.Lunar CalendarSelect Lunar Calender and press L to access the dateedition window. Change the date if needed by pressingthe corresponding keys, then press L to confirm.
Western HoroThis menu allowany given day. Tfirst either enter know your sign, menu, otherwiseenter your birthcorresponding sigIn the Horoscopeday depending o(in the second cpressing L).
Chinese FestiThis menu inforfestivals, from a gselect Fr. given dawant to know wboth cases, press
Op. Services
To launch a WAP session, select WAP > Homepage.
e connects to the networkess settings you have defined inetwork (see page 54). In case ofe screen displays "Go to menu":
ptions to access the WAP options
e first WAP site you access whenssion. In most cases, this menued and will connect to your
epage. To change this defaultns” on page 22.
u to store your favourite WAPe them and access them quickly
To browse the on-line pages.
To select a highlighted item.
To return to the previous page.
To end the WAP session.
20
5. Op. Services
This menu contains the services and features providedby your operator. Consequently, the menus describedbelow may vary or may not be available, depending onyour subscription. Contact your network operator formore details.
The services provided may involve making a phonecall or sending a SMS for which you may be charged.
Op. ServicesThis menu option is reserved for operator-specificservices. Please contact your operator for moreinformation about these options.
WAPThis menu allows you to access the services suppliedwith your network, such as news, sports, weather, etc.
If your phone was pre-configured, it isn’t necessary foryou to change the settings described in this section.With some operators, settings can be set remotely.
Your mobile phonaccording to the Accthe menu Settings > Na connection error, thpress ( or L O(see page 22).
HomepageThis is the link to thlaunching a WAP seitem is preconfiguroperator’s WAP homhomepage see “Optio
BookmarksThis menu allows yosite addresses, renamfrom the list.
Use + or -
Press L Select
Press R Back
Press ) or select Options > Exit
21
ettings described below apply to the
change the homepage name andentering the new name for the editar).s allows you to select one of the datahave defined in Settings > Accessge 55).ou to select the type of network used profile when launching a connection
and Proxy port allow you to define ass and port number to be used when
AP connection using the selected
isplay the list of installed securityen display its details or delete it), the the Current certificate.nseactivate the downloading of images pages.
ll speed up the global downloading browsed.
Op. Services
Press L Options while browsing, then selectBookmarks: the name and URL fields will beautomatically filled in with the information of thepage you are browsing.Select Add bookmark and start entering the new namefor the edit screen to appear. Press L OK, thenproceed the same way to enter the URL address.The Manage bookmarks menu allows you to Delete orEdit the selected bookmark.
Go to URLThis menu allows you to enter a WAP site address andto connect directly when selecting it (a quick way toaccess WAP addresses without saving them asbookmarks).All the addresses you enter in this menu and connectto at least once, will appear in a list. Select one of theitems and press L to reconnect to thecorresponding page, without having to re-enter itscomplete address.
SettingsIn order to access WAP sites, you must first configurea WAP connection profile.Select profileTo select one of the available profiles, then define theconnection settings for each of them.
All connection sselected profile.
Network• Homepage: to
address (start screen to appe
• Network accesprofiles you settings (see pa
• Bearer allows yby the selected(see page 54).
• Proxy address gateway addrelaunching a Wprofile.
• Security: to dCertificates (thSession info or
Browser optioTo activate or dattached to WAP
Selecting Off witime of the pages
Op. Services
Rename profile Optionss L Options to access:
cess the default homepage.
back to the previously browsed
o to the next browsed page.
load the currently browsed page its original server.
ve the currently browsed WAPas the default homepage.
ave images embedded in the that are displayed in the Picture.
d a WAP session.
age 22 for description of thesens.
22
To rename the currently selected profile (startentering the new name for the edit screen to appear).CacheTo empty an area of the phone’s memory where thepages browsed during a WAP session are stored.
Push inboxThis menu allows you to read and manage messagesautomatically sent to you by the network and / or byyour operator.
In some cases, a red "@" sign will be displayed on thescreen to inform you that you have received a new pushmessage. Press L Read to read it or R Back to goback to idle.
Push messages include URL links for quick access tothe corresponding WAP services: a single click on thelink will connect to the WAP site for browsing ordownloading multimedia files into your handset.
If your push inbox is full, a message will advise you todelete some messages in WAP > Push Inbox.
While browsing, pres
Homepage To ac
Back To gopage.
Forward To g
Refresh To refrom
Set as homepage
To sapage
Save as... To spagesalbum
Exit To en
BookmarksGo to URLSettingsPush inbox
See poptio
23
details the operations of the variousode.
re picture and press = or on the to take the picture.picture is taken, a view screen isress to ignore the picture, or
to access the following options (seeenu” below for details).
tion before the view screen time-out,tomatically saved.
ed with the date they were taken, e.g.jpg" for a picture taken on October 4,
Zoom in / out
Increase / decrease brightness
Exit Camera mode and return tohome screen
Activate/deactivate the self-timer
Activate/deactivate the burst mode
Access the Options menu
Return to previous screen
Camera
6. Camera
Your Xenium 9@9v mobile phone features a built-indigital camera. You can take pictures, store them inyour phone or transfer them to your PC via Infrared,use them as wallpaper or send them to your friends viaMMS. This chapter describes in detail how to use thecamera.
How to...This section describes how to perform the mostcommon operations with your camera.
Activate the camera To activate the camera mode, simply press RCamera: the camera application is automaticallylaunched.
After a period of inactivity, the camera automaticallyexits.
When the camera is active, the preview screen isdisplayed and the lens is automatically focused.
The table belowkeys in camera m
Take a pictu1. Frame your
touch panel2. Once the
displayed. Ppress “Camera m
If there is no acthe picture is au
Pictures are nam"0410_154157.at 15: 41:57.
+ -
< >
) or
0
*
L
R
Camera
The number of pictures you can save varies according VGA (640 x 480)0) aper (128 x 160) higher the resolution, the larger
you to adjust the quality of theyour camera: Low, Medium, High.y, the smaller will be the resultingallowing you to store more photosne.
cture and save it, the file is storedfolder. When you open the menu,layed as thumbnails. Use the up
n keys to move through the list. n full-screen, press =. Use the upn keys to move through the list ofptions to access the following:
his menu to transfer an image toer device. The options are: MMSfrared.
24
to the settings: the higher the resolution, the biggerthe file size. A message will warn you if there isn’tenough memory left. In this case, you must delete databefore storing a new picture.
Using the self-timer1. In Camera mode, press 0.2. Adjust your picture, and press to start the
countdown of 10 seconds (this value cannot bechanged).
Press to stop the timer and go back to preview mode.
3. A sound is played three seconds before the pictureis taken, then again when it’s actually shot.
Camera menuThis section describes in detail the Camera menuoptions.
Picture resolutionUse this menu option to choose the size of the photosyou take. The options are:
Medium (320 x 24 Screensize - WallpPlease note that thethe file size.
Picture qualityThis menu allows pictures taken with The lower the qualitimage files, thereby on your mobile pho
My picturesWhen you take a piin your My pictures your photos are dispand down navigatioTo view the image iand down navigatioimages. Press L O
Send by... Use tanothand In
25
feature allows you to apply a numberl effects to your images. The options
, this feature allows you to takeight situations.
ws you to take a time-delayed pictureget into the frame as well. To use the On in this menu, return to the view-me your picture, and then press =.oot
menu option allows you to take atos with one press of the button. Noteontinuous shoot, the resolution must
se this option to delete all the files inur My photos folder. A warningessage appears: Do you really want tolete? Press L Yes to delete all or
No to return to the previousreen.
Black & White
Negative
Camera
ModeColor modeThe Color mode of different visuaare:
Night modeWhen activatedpictures in low-lSelf-TimerThis feature alloso that you can Self-Timer, selectfinder mode, fraContinuous shActivating this "burst" of 4 phothat to use the C
Set as wallpaper
To set the selected photo as the imageto be displayed in the background ofyour screen.
Modify This option launches the image editingprogram (see “Picture album” onpage 40).
Properties Choosing this option displays thefollowing properties of the selectedimage: Name, Size (in Kb), Resolution,and Format.
Rotate This option allows you to rotate animage; the options are: - 90 degrees, +90 degrees, + 180 degrees.Changes are automatically applied.
Rename Use this option to rename an imagefile.
Delete Use this option to delete only theselected file from your My picturesfolder. A warning message appears: Doyou really want to delete? Press LYes to delete all or R No to return tothe previous screen.
Delete all UyomdeRsc
None
Sepia
Camera
be set to Screensize (for more information, see Slide show will launch a slide show of thees folder. During the slide show,displayed briefly on the screen. end the slide show and return to
tion to adjust the exposurer mobile phone’s screen.
u to take photos with decoratived frames folder contains frames your mobile phone when you
t and shutter sounds will be
ettings to their default values. Aears: Do you really want to resetes or No.
ovides you with on screen help inyour mobile phone.
26
“Picture resolution” on page 24).When the camera has finished processing the images,they are displayed on the screen as thumbnails. Youmay then press L Options to access the optionsdescribed below.
When you save or delete an image from the group, itis removed from the thumbnail view and stored in theMy pictures folder.
Selecting this optioncontents in My pictureach photo will be Press R or tothe previous screen.
BrightnessUse this menu opcompensation of you
FramesThis feature allows yoframes. The Standarthat were loaded onpurchased it.Sound settingsWhen On, the aleractivated.
Default settingsTo reset all camera swarning message appall settings? Choose Y
HelpThis menu option prtaking pictures with
View To view the pictures. Press - to viewthe pictures.
Save To save the selected image.
Save all To save all the images in the group.
Send by... To send the selected image by MMS,Email, or Infrared.
Properties To display name, size, resolution andformat of the selected picture.
Delete To delete the selected image.
Delete all To delete all the images in the group.
27
nly applies to Meeting and To Do updated when changing time zones” below).
ntsom the list and press L Options toing options:
ating event modifies all instances of
your organizer can be displayed inview and Month view. Select a view or > to display the previous or nextth.
ventss you to delete past events. Enter theor future) from which all previous
change the selected event.
change the sound associated with alarm type of the selected event.
play the current sound.
delete the selected event.
Tools
7. Tools
This menu contains features and options designed tokeep you organised and informed while on the move.
OrganizerThis menu allows to create, store and manage eventsin your organizer. When the organizer alert is On (see“Display” on page 50), a beep alerts you when anevent is due.
The organizer shares the mobile memory capacity withother features (phonebook, picture album, sound,etc.). To check the memory available in your phone,select My Files > Memory status.
Creating a new event1. In Events, select <New>, then the type of event
to create (Holiday, Meeting, To Do).2. Enter the start and end date and time of the
event and name it (e.g. "Meeting with Smith").3. Set a reminder and a frequency: alerts will be
triggered at the chosen time.
The reminder oevents. It will be(see “World clock
Managing eveSelect an event fraccess the follow
Changing a repethis event.
Events viewsEvents stored inDay view, Week format and use <day, week or mon
Deleting old eThis menu allowstart date (past
Change To
Change sound
Tothe
Play sound To
Delete To
Tools
events will be deleted and press L OK twice to Snooze modeu to set the snooze mode On orrings and the snooze mode is On:pt R Stop) to stop the ringinge the phone. The alarm will ringutes later.
stop the ringing and the alarm
automatically deactivated after 9
ing applies to all the alarms you
to set and display both the local the foreign time zone of youryou choose to display the localour home screen, the image your wallpaper will no longer beill be replaced with the standardallpaper.
if you want to display both theme of another time zone on ther - to set the option On or Off.
28
delete all events preceding this date.
To delete all events set in your organizer, enter a startdate several years ahead (e.g. 31st of December 2015)to make sure all events preceding this date are deletedat once.
Alarm clockYour mobile phone has a built-in alarm clock with asnooze feature. You can set up to three separate alarmsand choose whether or not the alarm should repeat.To set an alarm, follow the steps below:1. Select an alarm and set it to On.2. Then enter the time and press L OK.3. Then select the frequency: Once, Daily, On
weekdays.4. Finally, select the type of alarm: Melody or Buzzer
and press L OK.Repeat the above steps to set other alarms.
The alarm clock will ring even if your mobile phone isswitched off and/or the ringer volume is set to Silent.When the alarm rings, press any key to stop it or closethe phone (except if the snooze mode is on, see below).
This menu allows yoOff. When the alarm • press any key (exce
temporarily or closagain around 7 min
• press R Stop torepetition.
The snooze mode is alarm repetitions.
The snooze mode setthave set.
World clockThis menu allows youtime and the time inchoice. Note that if and foreign time on yhave selected as youdisplayed there, but wInternational clock w
World clockActivate this option local time and the tiidle screen. Press + o
29
and operators with the navigation in the table below:
top of the screen indicates whicho use for entering operators.
to get the decimal point. racy is to 2 decimal places and ise higher decimal figure.
ne allows you to connect to a varietyes via infrared. This menu provideseatures to set up a connection withvices.
one has an infrared port that allowsceive data to or from other infrared-es (e.g. another mobile phone, a, etc.) through a wireless link.
Press > or the * key.
Press < or the * key twice.
Press + or the * key 3 times.
Press - or the * key 4 times.
Press L.
Tools
When On, the new menu item Switch local and foreignallows you to display the zone of your choice.
Foreign settings
Local settings
Alarms, reminders, programmed events are time zoneindependent! If you set an alarm or an event at9:00 AM in time zone A, it will still ring or be due at9:00 AM if you change to time zone B.
CalculatorYour phone has a built-in calculator that you can useto perform basic calculations. Numbers are entered
with the keypadkeys as indicated
An icon at the navigation keys tPress and hold 0Calculator accurounded up to th
Infrared Your mobile phoof external devicyou with more fthese external de
InfraredYour mobile phyou to send or recompliant deviccomputer, a PDA
Foreign zone Move + or - to select the timezone of your choice.
Daylight saving Allows you to set the daylightsaving option On or Off for aforeign time zone.
Local zone Move + or - to select the time zonecorresponding to your area.
Daylight saving Allows you to set the daylightsaving option On or Off for thelocal time zone.
Addition
Subtraction
Multiplication
Division
Equal
Tools
messages are displayed on the screen and allow you to
if your phone isn’t contacted by the time out is reached, if then, if the size of the file sent is toothe process.
r to inform you that you haves L to access the options
teru to convert a sum from one using the exchange rate of yourert from Local to Foreign or vice the Exchange rate field and an
he data, then go back to idle.s you have received will be savedir default names, which you can selecting them in the relevant
y the details of the data youived.
the data received.
30
Files that are copyright protected cannot be sent.When connecting with a PC, make sure you haveactivated its infrared option.
Position of devicesBefore transmitting data between two devices, theymust be correctly positioned in relation to oneanother. Make sure that:• the infrared ports are facing each other,• they are at a less than 30 cm away from each other.• nothing obstructs the infrared beam.
Receiving dataWhen you select Receive, your phone is ready toreceive an item via infrared and waits for the anotherinfrared device to send it. As with sending data,
follow the process.
Receiving is cancelledanother device beforeinfrared link is brokelarge or if you cancel
Saving the dataA message will appeareceived a file. Presdescribed below.
Money converThis menu allows yocurrency into anotherchoice. You can convversa. Enter a rate in
Save To save tThe itemunder thechange bymenus.
Show To displahave rece
Discard To ignore
31
ys the list of contacts whose calls andcted. Select <New> to add a nameding number to the list, then chooset to reject SMS and/or Calls coming
the list and press L Select toed information or Delete it. Select details of the blacklist.
me to the blacklist directly from thest and SMS Inbox: select a contact, an the relevant list, press L OptionsAdd to blacklist. The related numberhe blacklist.
lows you to set the firewall option or Off. When On, your mobileone will reject all calls and SMS
ceived from the people listed in theacklist. Rejected calls appear in thell list and rejected SMS in the SpamS Box.
Tools
amount in either the Local or Foreign fields: the sum iscalculated automatically.
Auto Switch On / OffThese two separate menus allow you to set yourmobile phone to switch itself on or off at pre-set times.To set Auto switch on sound, select On and press LOK. Enter the time at which you want your mobilephone to switch itself on and press L OK. Select thedesired frequency from Once, Daily, or On weekdaysand press L OK. A message appears to confirmactivation.Proceed the same way for the Auto switch off soundoption.
FirewallThis menu allows you reject all calls and SMS receivedfrom the people you include in the blacklist.
SettingsSelect this menu item and press L Select to accessthe options described below.
BlacklistThis menu displaSMS will be rejeand the corresponwhether you wanfrom this person.Select a name inChange the relatDetails to display
You can add a naPhonebook, Call licall or a message iand simply select will be added to t
Notification To select the way you want to benotified of a rejected call or SMS: witha Status icon displayed in idle screen oran Icon feedback. You can also chooseNo notification.
Activation AlOnphreblCaSM
Messaging
can also send and receive MMSging Service) messages. With messages that contain pictures,
S messages, your recipient mustnabled phone in order to be able.
d MMS, select Create message >creation screen, five icons allowAdd text, Add sound, Send the
MMS options. Use + or - to move
add recipient and send yourage.
dd several recipients and sendmessage.
ore the current message and itshments in the archive menu.
ttach a melody.
ttach an image.
hange the language for typing.
32
8. Messaging
This menu allows you to send and receive text ormultimedia messages, as well as manage the messagesyou have sent and received. In idle mode, press Lto access the main menu. Then select Messaging andpress L Select to create, edit and send yourmessages.
Create Message
When writing messages, you can toggle between T9input, multitap by long pressing *.
New SMSThis menu allows you to send text messages using theShort Messaging Service (SMS) and to manage themessages you send and receive.1. To compose and send an SMS, select Create
message > SMS.2. Enter your text and press L OK to access the
following options:
New MMSYour mobile phone (Multimedia MessaMMS you can sendsounds, and text.When sending MMalso have an MMS-eto view your message
New MMSTo compose and senMMS. In the MMS you to Add picture, message or access the
Send To mess
Send to multiple
To ayour
Save as draft
To stattac
Add sound To a
Add graphic To a
Input Languages
To c
33
age is completed, select Send to addd your message. A progress bar allowse sending of your message, press Rsh to cancel the sending. If you savedraft, it will be available in the Draftsve sent the MMS, it is available in the
To save your message as a draft thatyou can edit, complete and sendlater on.
To save your message as a template,that you can use as a basis for otherMMS (e.g. "Happy birthday" typeof message.
To preview the slide show you havecreated.
To change the value of slideduration set in Settings > Applicationsettings and to set a delay betweeneach slide.
Messaging
from one option to the next and press L to accessthe menu.1. Design your message: Add picture, Add text and/
or Add sound. Press > to create more slides.2. The last icon on the left-hand side lets you access
the MMS options (see below).3. Select Send to select the contact from the contact
list and send the MMS to the selectedrecipient(s).
Pictures are chosen from the Picture album. Copyrightprotected pictures cannot be sent via MMS.Sounds can be chosen from the Sound Albummelodies. The following options are available when creatingnew MMS messages:
Once your messrecipient and senyou to follow thCancel if you withe MMS as a dmenu. If you haOutbox.
Add slide To add more slides.
Next slide /Previous slide
To move to the next/previous slide.Note that this option only appearsif the MMS contains more than oneslide.
Edit subject To edit and change or enter thesubject of your message.
Delete slide To delete the selected page (if thereis more than one in the message).
Saveas draft
Saveas template
Preview MMS
Slide duration
Messaging
Inbox
isplayed, press L Options toons listed below:
Move to To store messages in the phoneory. You can then consult them
Messages > SMS > Archive.ving a message to the archivetes it from the SMS Inbox list.
move the selected message in them Box (this will delete it fromSMS Inbox).
save the number of the sender if attached to the message.
add the sender’s phone numberhe Firewall blacklist (see page 31details).
s option isn’t available if theer’s identity (i.e. his phoneber) is hidden.
switch back to automatic mode: MMS is then played as atinuous slide show.
34
This menu allows you to read SMS/MMS messagesyou have received. The messages are displayed in a list. At the end of the list, the <Delete all> item allows youto delete all the messages at once. Deleting oldmessages is useful to free memory space in order toreceive new messages.When an SMS is displayed, press L Options toaccess the menu options listed below:
When an MMS is daccess the menu opti
Reply by SMS To reply to the sender.
Call back To call the sender of the message(operator- dependent).
IP Call To make an IP call.
Edit SMS To edit, modify and resend theSMS to someone.
Forward to To forward the selected message.Note that attachments cannot beforwarded.
Delete To delete the selected message.
archive memin Modele
Move to Spam Box
To Spathe
Store number To it is
Add to blacklist
To to tfor
Thisendnum
Play To thecon
35
ve saved can only be sent from thex folders. You can NOT recover an
essage, notification or report) that. Press R Back to cancel deletion.
Autosave SMS is on. See page 37 for
MS messages saved as drafts, orved if you quit the MMS menu beforeg your MMS. You can Delete, Editto someone.
MS saved as templates for editing and SMS have already been preset. You
dify them.
Box all SMS that were rejected via the(see “Firewall” on page 31 for details
Messaging
Do NOT delete notifications before you have retrievedthe MMS, or you will not be able to retrieve the MMS.Notifications are automatically deleted once you havereceived the full MMS.
OutboxLists the SMS/MMS messages you have Sent orcreated but Not sent yet. You can Delete, Move toArchive, Edit SMS or Forward to someone.
Messages you haDrafts or Outboitem (whether myou have deleted
Make sure that more details.
DraftsLists all SMS/Mautomatically sasaving or sendinSMS or Forward
TemplatesLists all SMS/Msending later. 10can edit and mo
Spam SMSThis menu listsFirewall option
Next / previousslide
To move to the next or previousslide. You can also press < or > whenviewing the MMS in manual mode.Note that this option only appearsif the MMS contains more thanone slide.
Save picture To detach the picture of the currentslide and save it in the Picturealbum.
Save sound To detach the sound of the currentslide and save it in the Sound album.
Close To close the MMS and go back tothe list of options.
Messaging
on this feature). Select a message in the list and press Broadcast SMSou to manage the reception ofregularly transmitted to alltwork. It gives you access to the
cell broadcast messages On or Off.
f messages you want to receive., select <New>, enter the code
rator, and, if desired, associate aelect an existing topic in the list,e or delete.
15 different topics in the list. Toesponding to the different topics,.
of messages you want to bed on the idle screen (in this case, District code and Topics menus).
36
L Options to access the following items:
ArchiveThis menu allows you to consult all the messagesstored in the phone’s memory using the Auto saveSMS or Move to archive options. The <Delete allSMS> item allows you to delete all SMS at once.When a message is displayed, press L Options toaccess the following options: Reply by SMS, Call back,IP call, View SMS, Forward to, Delete, Move to archive,Move to spambox, Store number, Add to blacklist.
This menu allows ySMS broadcasts subscribers on the nefollowing options:
ReceptionTo set the reception of
TopicsTo define the type oTo configure a topicprovided by the opename. You can also swhich you can renam
You can enter up to obtain the codes corrcontact your operator
District codeTo select the type permanently displayeenter the type in both
Add to blacklist
To add the sender’s phone numberto the Firewall blacklist.
This option isn’t available if hisidentity (i.e. phone number) ishidden.
Move to inbox
To move the selected message to theSMS Inbox (this will delete it fromthe Spam Box).
Delete To delete the selected message.
37
When On, this option allows you totransmit the number of your SMSmessage centre together with themessage. The recipient can thenreply using your own SMS centreand not theirs. This speeds up therate of transmission.
This feature is subscriptiondependent.
When On, allows you to displayreceived SMS on the idle screen.You can then quickly reply to amessage received by pressing L,entering your message in the editscreen, and pressing L again.If you receive an SMS while you arereading one, you can reply to thefirst one before reading the second.Alternatively, you can press Back toexit the first message. The secondmessage then appears on yourscreen.
Messaging
Settings
This menu allows you to configure the SMS/MMSsettings. Select SMS or MMS. When you select SMS
you can access the following options include:
SMS center To select your default SMS centre.
If not available on your SIM card,you must enter your SMS centrenumber.
Auto save SMS
When On, this option willautomatically save messages sent inthe Outbox menu.
Signature When On, allows you to add asignature at the end of yourmessage. You can Edit, Change orSave the signature.
Validity period To select the duration by whichyour messages will be stored in theSMS centre. This is useful when therecipient is not connected to thenetwork (and thus cannot receiveyour message immediately).
This feature is subscriptiondependent.
Reply path
SMS chat
Messaging
select how long your MMS willstored on the server, from 1r to maximum. This is usefulen the recipient is notnected to the network (ands cannot receive your message
mediately).
is option can be set to On or Off informs you (via an SMS)
en the status of the MMS youe sent has changed, i.e. if it hasn read or deleted.
is option can be set to On or Off informs you (via an SMS) of status of delivery, e.g. if your
S has been received orected.
is option can be set to On or Off allows you to automatically
e the messages sent in thetbox menu.
ows you to select the durationween each slide of the MMS.
38
When you select MMS you need to choose an MMSprofile in the list and select Modify to access thefollowing options:Application settings
Delivery report
When On, this option will informyou via SMS whether your ownSMS was received or not.
This feature is subscriptiondependent.
Retrieval mode
Allows you to choose from:• Manual: you connect to the
server manually by selecting anotification in the Inbox,selecting Read to download,then Play.
• Automatic: new MMS aredirectly placed in the Inbox.Select the MMS and press > toplay it.
This mode is deactivated whenroaming.
Validity period Tobe houwhconthuim
Read report Thandwhhavbee
Delivery report
ThandtheMMrej
Auto save ThandsavOu
Slide duration Allbet
39
MessagingNetwork settings
My dictionaryThis feature allows you to enrich the T9 dictionaryused for writing messages. Select <New>, enter theword of your choice and simply press = to save it. Fordetailed information on entering with T9, please see“T9® text input” on page 14).
Network access
To choose a connection profile fromthe ones you have set (see “Accesssettings” on page 55).
Bearer To select the type of network usedwhen launching a connection: GSM,GPRS or GPRS first.
MMS center To enter the MMS address of theserver you will connect to.
Gatewayaddress Gatewayport
To enter the IP and Port numbers ofthe server’s gateway.
My Files
Inside the folders, images are displayed as a text list.press > to view the image. Pressnu options listed below.
ou to manage the sound filese phone. The options are:
rename the picture.
send the selected image file viaared (see page 29) or MMS (seee 32). Note that you cannotd pictures that are copyrighttected.
set the selected picture aslpaper.
delete the selected picture or allures at once.
access your downloaded sounds. DI or AMR audio file can beported by your phone. You cannload those format files to the
bile phone via MMS, infrared
40
9. My Files
This menu and its sub-menus contain options relatedto the multimedia features of your Xenium 9@9vmobile phone.
Picture albumThis menu allows you to display and modify theimages stored in your mobile phone. The options are:
Select an image and Ltto access the me
Sound albumThis menu allows ystored in your mobil
My pictures To access the photos taken with thephone’s embedded camera.
My images To access the images you havedownloaded.
Protected images
To access the list of copyrightprotected sample images.
Icons To access the list of icons you havedownloaded.
Rename To
Send by... To Infrpagsenpro
Set as wallpaper
To wal
Delete/Delete All
To pict
Own melodies To fileMIsupdowmo
41
atusws you to display the percentage ofle in your phone. Various featuresy capacity: pictures, sounds, recordedce tags for voice commands, storedbook and organizer entries, games,
eck the memory status. The displaypercentage of free memory and theemory in Kilobytes (Kb). Press Le detailed list of memory used by each
ne is supplied with many sounds and only delete sounds or pictures in the
r Picture Album folders, e.g. to freer your own sounds and pictures.
ssage appears when saving a new item, an item to be able to create or add a
activated in the Settings > Soundsmenu (see page 49).
To Delete the selected sound file orall files at once.
My Files
Once in a list, you can then select a sound file andpress L to access the menu options listed below.
Memory stThis menu allomemory availabshare the memormemos and voimessages, phoneetc.Press L to chshows you the phone’s total magain to check thfeature.Your mobile phopictures. You canSound Album omemory space foIf the List full meyou must deletenew one.
Rename To
Rename the selected sound file.
Send by..
.
To send the selected sound file viaInfrared (see page 29) or MMS (seepage 32).
Set as ringtone
To set the selected sound as ringer.
As SMS/MMS ringer
To set the selected sound Asringtone. This option must be
Delete / Delete all
Protected melodies
To access the list of copyrightprotected sample sounds.
The maximum size fordownloading MIDI or AMR audiofiles by MMS/infrared/WAP is50kb.
or WAP.
Call Info
The Rejected calls menu lists all calls that have beenwall option (see “Firewall” on this feature).
u to set all the options related tog, call waiting, etc.
ns allows you to accept a call byept ) (used to reject a call).
s to All calls, Voice calls, Fax callsata calls. When this option is you hear a beep if someone tries you while you are already on aelect the Status option to findhether the GSM call waiting isor not.
s you to set On or Off the callg for incoming voice calls whileS connection is ongoing.
42
10. Call Info
The menus described in this section are used formanaging how your Xenium 9@9v mobile phonehandles calls and their related costs.
Call listYour mobile phone can provide you with a list ofoutgoing and incoming calls, attempts at autoredialling, as well as call details. The different types ofcalls (All Calls, Missed calls, Received calls and Outgoingcalls) are displayed in chronological order with themost recent call on top. You can also select Delete allto delete all calls from the Call list. If thecorrespondent is stored in your phonebook, thecorresponding name is displayed.Select an item and press L to access the followingoptions: Details, Call, Store number, Delete, Send SMS,Send MMS and Add to blacklist.
This option isn’t available if the sender’s identity (i.e.his phone number) is hidden.
rejected via the Firepage 31 for details on
SettingsThis menu allows yocalling: call forwardin
Any key answerWhen On, this optiopressing any key, exc
Call waitingWith GSM call
Applieand Dactive,to callcall. Sout wactive
With GPRS call
Allowwaitina GPR
43
ing calls to your mailbox or to ar in your contacts or not) and appliesice calls and Fax calls.
g this option, you must enter yourmber (see next section). This feature
dependent, and different from callakes place when one/several calls are
Will divert all the incoming calls.If you select this option, you willnot receive any calls until youdeactivate it.
Allows you to choose when youwant to divert incoming calls: If noreply, If not reachable or If busy.Each option can be setindependently.
Display the status of all callforwarding.
Call Info
Auto redialWhen On, if the person you are calling is busy, yourphone will automatically redial the number until asuccessful connection is made or until the maximumnumber of attempts is reached (10). The phone beepsat the beginning of each attempt and emits a specialbeep if the connection is successful. The time betweenredials increases with each attempt.
Caller IDTo Show or Hide your identity from yourcorrespondent. The Status will inform you whichoption has been activated.
MailboxesTo enter your voice mailbox numbers (if not availableon your SIM card).
In some cases, you might have to enter two numbers:one to listen to your mailbox, the other one to forwardcalls. Contact your operator for more information.
Call forwardTo divert incomnumber (whetheto: Data calls, Vo
Before activatinvoice mailbox nuis subscription transfer, which tin progress.
Unconditional
Conditional
Status
Call Info
IP Prefix GPRS countersllows you to monitor the amountGPRS sessions. This feature isork dependent.
s option will display the lastnection session or transferme of your mobile phone (e.g.
r a WAP connection overRS).
s option will display the lastnection session or transferme of your PC transmission.
anaged by your mobile phone ones used by your operator. Yousider the call counters displayedrmative items, but NOT as thesis.
44
To set the prefix provided by your operator (up to 10digits can be stored) in order to make IP calls. Thisfunction is subscription and network dependent.Contact your operator for configuration parameters.
Info at call endTo set On or Off the systematic display of the lengthand/or cost of each call when hanging up.
CountersThis menu allows you to track the cost and duration ofyour calls. Most options mentioned below aresubscription dependent.
GSM countersThis feature is used to keep track of your incomingand outgoing GSM calls. Please note that the GSM callcounters do not include WAP connections.
The GPRS counter aof data received via subscription and netw
Last call info To display the duration and/or costof your last call.
Totalduration
To Show or Reset the time durationof Outgoing or Incoming calls.
Mobilesession
ThiconvoluafteGP
PC session Thiconvolu
The call counters mmight differ from theshould therefore conon the screen as infoactual charge rate ba
45
into the onboard phonebook new> in the list.
first, then last name (up to 20 latin; one of the two fields can be empty,th. the Number type. Numeric fields can 40 digits and one "+" sign. Each feature a maximum of 5 numeric
2 mobile numbers, 3 work numbers).ersonalise this contact with a picture see below.
rsers item that appears in the contactso store your own phone number. We enter your mobile phone number asr relevant information.
fields can be empty, the Own numbersdeleted.
umber number will call the emergency
r in your country. In most cases, youber even if you haven’t yet inserted a
ered your PIN.
Contacts
11. Contacts
Contacts are stored in one of the two availablephonebooks: on your SIM card (number of entriesdepending on capacity) or on your phone (up to 999names). When entering new names, they will only beadded to the phonebook you have selected.
Contacts listIt is in this menu that you can manage the names andtelephone numbers. You can also access the Contactslist directly from the home screen by pressing -.
Adding contacts to the SIM phonebook1. Select <Add new> in the list.2. Enter the name and the number of your choice,
then the type of number allocated to the name(Phone, Fax or Data).
A number is limited to 40 digits, depending on yourSIM card. Entering international prefix, country andarea codes allows you to dial a number from anylocation.
Add contacts1. Select <Add2. Enter the
characters)but not bo
3. Then selecthold up tocontact canfields (e.g.
If you wish to pand/or a sound,
Own numbeThe Own numblist allows you tadvise that youwell as any othe
Although all itsitem cannot be
Emergency nThe emergencyservices numbecan call this numSIM card or ent
Contacts
twice will duplicate all the
cts at once. This option onlyrd phonebook, not to the SIM
ge contactse to access the phonebook. To
e:s the key for the letter that yout to go to in the list (e.g. press twice to access the letter "U"). first record starting with thisr is selected in the list.
s this key then enter the firstrs of the name you areching, and press LOK to goctly to that name.
can also use the <Search> itemearing in the phonebook.
46
In Europe the standard emergency number is 112, inthe UK it is 999.
SettingsThis menu contains the settings for configuring thephonebooks of your mobile phone.
Select contactsThis menu allows you to select the phonebook to use,In SIM, In phone or SIM + phone. Press + or - to selecta phonebook. Contacts added to the selectedphonebook can then be copied into the other, via theCopy to SIM or Copy to phone options.Your mobile phone only manages one phonebook ata time and will ignore the information relative to theother one, e.g. if "Smith" is present in bothphonebooks and if you delete it in the phone, itremains unchanged in the SIM.
StatusSelect this menu to display the total number ofcontacts you have saved in each phonebook, out of thetotal number available.
Copy to phoneThis option will copy the contents of your SIM cardinto your phone.
Selecting this optionnames.
Delete allTo delete all contaapplies to the onboaphonebook.
Edit and manaPress - in idle modsearch for a given nam2 to 9 and #
Preswan8Thelette
# Presletteseardire
Youapp
47
e and sound to contactsin the onboard phonebook can be a picture and/or a sound.
display the details of the selectedd.
copy a contact of your phoneonebook into the SIM phonebook
is then always updated whentching phonebooks or when usingther phone).
set a direct access to this contact byking to a key (see page 53).
e first number you enter becomes default number which isomatically dialled when pressing
. This option allows you to setther default number.
change or to define the field type of selected number.
change the number of the selectedd.
Contacts
In the SIM phonebookChoose a contact in your SIM phonebook and pressOptions to access the following options:
In the onboard phonebookChoose a contact in your onboard phonebook andpress OK or Options to access the following options:
Select Show to access the list of numbers or fields savedfor this contact. Select <Add new number> to create anew field or select one of the number and press Lto access a second set of additional options, amongwhich are:
Adding picturContacts stored personalised with
Details Call IP call Send SMS
Send MMS Flash dial Copy to
phone
Delete Add to blacklist Change
Show Call IP call Send SMS
Send MMS Select picture Select sound Copy to SIM
Delete Add to blacklist Change name
Show Tofiel
Copy to SIM card
Toph(it swiano
Flash dial Tolin
Make default
Ththeaut(ano
Change type
Tothe
Change Tofiel
Contacts
48This function is only available when you select theonboard phonebook.
1. Select a contact and press L Options.2. In the list, choose Select picture to add a picture
from the Picture album and choose Select melodyto open the list of ringers and add a melody.
When the contact calls, the picture and/or soundassociated with this contact will be displayed/played.
The picture associated with a contact is also used forthe Quickcall feature.When you change it, it is alsoupdated in the Quickcall settings.
49
gert On or Off an alert for each time youessage. When On, you can select theice from the ringers list.
itch the key tones On or Off.
t alert sounds for the following items:hen an event programmed in youruehen you missed a callwhen the battery is running low andingfor a beep alert that sounds everyg a call to help you manage theur call (the beep cannot be heard by
ct the item(s) of your choice by
allows you to set the alert sounds One alerts themselves. E.g. setting theff will not prevent your phone from
eminder screen (if you programmedresponding sound will not be played.
Settings
12. Settings
This menu allows you to change the settings related toeach available option (sounds, time and date, security,etc.) and to customise your phone.
Sounds
RingtoneAllows you to select a ring tone. The list also includesmelodies you have saved. Scroll through the list andwait to hear the selected melody being played.
Ringer volumeThis option allows you to adjust the volume of yourringer. Press + or - to adjust the volume of your ringerfrom Silent to Increasing.
SilentWhen this mode is On, all alerts are deactivated.
The Silent mode also applies to key tones.
Messages rinAllows you to sereceive a new malert of your cho
Key tonesAllows you to sw
Sounds alertsAllows you to se• Organizer: w
organizer is d• Missed call: w• Battery alert:
requires charg• Minute alert:
minute durinduration of yothe caller)
Select or deselepressing < or >.
This menu only or Off, NOT thOrganizer alert Odisplaying the Rone), but the cor
Settings
Vibra alert Contrast from different levels of contrast.
wallpaper of the main screen On
when receiving incoming callsg menus, etc. Select one of the
ty from different levels of backlight
e time using the keypad or with
r Time zone and activate Daylight before setting the time.
50
Allows you to set the vibra alert On or Off whenreceiving a call, when an event set in the organizer isdue, when you receive a message and when the alarmrings.The vibra alert is always Off when you connect thecharger or the Cigarette Lighter Adapter.
Switch on soundAllows you to setthe welcome sound of your mobilephone to On when you switch the phone on.
EqualizerThis option allows you to choose from different audiosettings. It is only available while a call is in progress.Scroll through the list and wait a few seconds to hearthe difference.
DisplayThis menu allows you to configure how the menus aredisplayed on the screen.
Deactivating most of the functions in this menuincreases battery life (see “Autonomy” on page 51below).
Allows you to choose
WallpaperAllows you to set theor Off.
BacklightBacklight is activatedor messages, browsinavailable values.
Backlight intensiAllows you to chooseintensity.
Time and dateSet timeAllows you to set ththe navigation keys.You should select yousaving (if appropriate)
51
another SIM card when you areoswitch when roaming.
es you to set the names of the card
nd the SIM card you want to rename.
Slots you to select the default SIM slot.
you a direct access to the features thatst energy and allows you to improve
by quickly changing each setting.
oup of predefined settings that allowdapt your phone to the environment.g, for example, will set your ringert, activate the vibrating alert andey tones (the other items are set
our Personal settings). When your selecting Personal will reactivate allngs. The details of each profile areselecting a profile.sociate a hotkey with a profile (e.g., 3 to activate Outdoors). Long
Settings
Set dateAllows you to set the date by pressing the appropriatenumeric keys or the navigation keys.
Local zoneAllows you to select your current time zone. Whenyou enter the menu, you are presented with a map ofthe world that you can navigate with the up and downnavigation keys. Each time zone is identifiedaccording to its position relative to Greenwich MeanTime (GMT) and by the main cities within that timezone.
Daylight savingAllows you to set the daylight saving to On (insummer time) or Off (in winter time). If daylightsaving is On and you set the time to 12:00, it willautomatically switch to 13:00 when turning theoption to Off.
Dual SIM
Select SIMThis menu allows you to switch from one SIM card toanother.
Switch on RoamingThis menu allows you to set your roaming status. Youcan select Off (roaming disabled), Ask when roaming
(select to switchroaming) or Aut
Set Slot NamThis menu allowslots. Select On a
Default SIM This menu allow
AutonomyThis menu givesconsume the moyour battery life
ProfilesA profile is a gryou to quickly aSelecting Meetinvolume to silendeactivate the kaccording to ymeeting is over,your usual settidisplayed when You can also aslong press key
Settings
pressing the same key deactivates it and returns you
ou to configure shortcuts to theyou access most frequently.
ou to set your four preferred oralled numbers. You can then
of them by selecting ther picture on the screen, thereby
o enter and browse the Contactson page 53 for details.
irect access to a specific functiong it to a key. A long press on thel then automatically activate thessociated number (Flash dial).ys have been preconfigured, e.g., but you can reprogram them only). The following keys are
Meeting ibra alert On
Ringtone Silent
ey tones Off
52
to your Personal settings. For more information, see“Hotkeys” on page 52.
ShortcutsThis feature allows yfeatures and options
Quick CallThis feature allows ymost frequently diquickly call one corresponding icon oremoving the need tlist. See “Language”
HotkeysAllows you to set up dor a contact by linkinkey in idle mode wilfunction or call the aA number of Hotke2 for Alarm clock(keys from 2 to 9locked:
Personal The information that appears herewill depend on how your mobilephone has been configured.
Autonomy Vibra alert Off
Ringtone Medium
Backlight Eco mode
keytones Off
Headset Vibra alert On
Ringtone Medium
Car Vibra alert On
Ringtone High
Outdoors Ringtone High
V
K
53
s you access the features relating toour mobile phone and the data you
n to set the PIN protection On or Off.
ill be asked to enter your PIN codeyour phone on.
ge your PIN code if this option is Off.
shange your PIN and PIN 2 codes, as Barring code. Depending on your features or options may require a
e given to you by your operator.
rong PIN code 3 times in succession,s blocked. To unblock it, request theyour operator or retailer. If you enterK code 10 times in a row, the SIMcked and unusable. If this happens,rator or retailer.
lock to Off, or select an immediate orhen selecting one of the delayed
you temporarily unlock your keypad
Settings
Depending on your service provider, other hotkeysmay be predefined and locked.
1. In the list, select a key from 2 to 9 andpress L. If the key was already programmed,select Change.
2. Browse the list to select the function you wish toassociate with this key and press L Select. Ifyou select Flash dial, you will be asked to select acontact from the contacts list.
3. To use a hotkey, press and hold the programmedkey when in idle mode.
When the phonebook in phone is selected, choose thenumber of your choice in the list that is displayed.
LanguageThis menu allows you to select a language for all menutexts. Use + or - to browse the list and select a languageby pressing L Select.
SecurityThis menu allowthe security of ystore there.
PIN protectioThis allows youWhen On, you wwhen switching
You cannot chan
Change codeAllows you to cwell as the CallSIM card, somePIN2 secret cod
If you enter a wyour SIM card iPUK code from an incorrect PUcard will be blocontact your ope
Keypad lockSet your keypaddelayed lock. Woptions, and if
0 Meeting mode.
1 Call voice mailbox.
* Dial international call.
# Key lock.
Settings
by pressing the # key, it will be automatically locked Call barringe use of your phone to specific
lied to Incoming calls (All calls oror to Outgoing calls (All calls,
Exc. Home). In both cases, the to all calls at once. The Status know whether a type of call is
ork dependent and requires aassword supplied by your service
ou to protect your messaging, menu. Select the menu you
fo privacy. The factory defaultn change the code.
ne operator to obtain fullS availability over its network
te subscription. You might alsor phone with the GPRS settingsperator, by using the menusn. Then select the bearer (GSM
us of each application to be used
54
again according to the delay you have selected.
In all cases, the keypad is automatically unlockedwhen you receive a call.
Public namesAllows you to manage a specific names list calledPublic Names list, and restrict calls to this list via theCall restriction option.
This feature is subscription dependent and requires aPIN2 code (see page 53).
Allows you to limit thcalls. This can be appWhen roaming) and/International and Intl.Cancel option appliesoption allows you tobarred or not.
This feature is netwspecific call barring pprovider.
Info privacyThis menu allows ycontacts and call infowant to protect in incode is 0000. You ca
NetworkContact your phoinformation on GPRand for an approprianeed to configure yousupplied by your odescribed in this sectioor GPRS) in the men(e.g. WAP, MMS).
Public names Allows you to consult, edit andmodify your Public Names list via aPIN2 code.
Callrestriction
Allows you to restrict the calls to thePublic names list when Public only isselected.
This feature is subscriptiondependent and requires a PIN2code (see page 53). This optionmight also apply to WAP.
55
To change the GSM settings:• Login & Password,• Phone No. needed to establish
the connection and provided byyour operator (ISDN No. orAnalogue No.),
• Inactivity time, a value of over 30seconds after which the phonedisconnects automatically (if aconnection was in progress).
To change the GPRS settings:• Login, • Password, • Inactivity time• the APN menu allows you to
enter the address of the externaldata network you want toconnect to, a text string used toestablish the connection.
Settings
Access settingsThis menu allows you to create different data profilesthat can be used for connecting to various services: forexample, when using WAP or when sending MMS,the selected profile will be used to connect to theGSM or GPRS network.Options described below are operator and/orsubscription dependent. Error messages duringconnection are mainly due to incorrect parameters:contact your operator before first use, in order to havethe appropriate settings, which you may receive bySMS in some cases. Some pre-configured profilesmight be locked, preventing re-programming andrenaming.Select an item from the list and press L to accessthe following options:
Show To display all parameters of theselected profile.
Change name To rename the selected profile.
GSM Settings
GPRS settings
Settings
GPRS connect
56
This menu allows you to define how your mobilephone connects to the GPRS service.
Register againProvides you with a list of networks available in thearea when the Manual mode is selected. Select thenetwork you want to register with and press = toconfirm.
Preferred listAllows you to build a network list in order ofpreference. Once defined, the phone will try toregister with the network, according to yourpreferences.
For data calls Your phone will connect to theGPRS service only when required.This option reduces energyconsumption, but increases theconnection delay.
Always on Your phone automaticallyconnects to the GPRS service (ifavailable). This option allowsquicker access to GPRS features,but increases energy consumption.
Icons & symbols 57
Icons & symbolsIn idle mode, several symbols can be displayedsimultaneously on the main screen.
If the network symbol isn’t displayed, the network isnot currently available. You may be in a bad receptionarea, moving to a different location may help.
Silent - Your phone will not ring whenreceiving a call.
Vibra - Your phone will vibrate when receivinga call.
GPRS attach - Your phone is connected to theGPRS network.
SMS message - You have received a newmessage.
Voice mail - You have received a new voice mail.
Battery - The bars indicate the battery level (4 bars = full, 1 bar = low).
Alarm clock activated.
Roaming - Displayed when your phone isregistered to a network other than your own(especially when you’re abroad).
SMS full - Memory for messages is full. Deleteold messages to receive new ones.
Call Forward Unconditional to number - Allyour incoming voice calls are being forwardedto a number other than voice mail.
Call Forward to voice mailbox - All your callsare being forwarded to voice mail.
Home zone - A zone designated by yournetwork operator. Subscription dependent,contact your service provider for details.
GSM Network: your phone is connected to aGSM network.Reception quality: the more bars are shown thebetter the reception is.
SMS Chat - option is set to On.
Memory full - The phone’s memory is full.Delete items to store new ones.
MMS message - You have received a newmultimedia message.
Wap message - You have received a message inthe wap push inbox.
Auto switch on/off - option is set to On.
Keep your phone in a safe place and keep itchildren's reach.g down your PIN code. Try to instead. nd remove the battery if you ared for a long time.de after purchasing the phonetriction options.f your phone complies with allws and regulations. Howevermay cause interference with
nic devices. Consequently youlocal recommendations andg your cellular phone both at
y. Regulations on the use ofvehicles and aircraft are
n focused for some time on ther users of cellular phones. The
dio wave technology, including has been reviewed and safetyrawn up to ensure protectionio wave energy. Your cellularwith all applicable safety
e Radio Equipment andTerminal Equipment Directive
58
PrecautionsRadio Waves
Your cellular mobile phone is a low powerradio transmitter and receiver. When it isoperating, it sends and receives radio waves.The radio waves carry your voice or data
signal to a base station that is connected to thetelephone network. The network controls the powerat which the phone transmits.• Your phone transmits/receives radio waves in the
GSM frequency (900 / 1800 MHz).• The GSM network controls transmission power
(0.01 to 2 watts).• Your phone complies with all relevant safety
standards.• The CE mark on your phone shows compliancy
with European electromagnetic compatibility (Ref.89/336/EEC) and low voltage directives (Ref. 73/23/EEC).
Your cellular mobile phone is your responsibility. Toavoid damage to yourself, to others or to the phoneitself, read and follow all the safety instructions andmake them known to anyone borrowing your phone.Furthermore to prevent unauthorised use of yourphone:
out of small Avoid writinremember it
Switch off the phone agoing to leave it unuseChange your PIN coand to activate call res
The design oapplicable layour phone other electro
should follow all regulations when usinhome and when awacellular phones in particularly stringent.Public concern has beepossible health risks focurrent research on rathe GSM technology,standards have been dfrom exposure to radtelephone complies standards and thTelecommunications 1999/5/EC.
59
with the vehicle manufacturer thatnic equipment used in your vehiclet be affected by radio energy.
scemaker:e phone more than 15 cm from youren the phone is switched on, in ordertial interference.he phone in a breastpocket.posite to the pacemaker to minimiseterference.our phone if you suspect thattaking place.
sser of a hearing aid, consult yourhearing aid manufacturer to learnparticular device is susceptible toterference.
erformanceove the performance of your phone,energy emission, reduce batteryd ensure safe operation adhere to thelines:
Always switch off your phone...Inadequately protected or sensitive electronicequipment may be affected by radio energy. Thisinterference can lead to accidents.
Before boarding an aircraft and/or whenpacking the phone in your luggage: the useof mobile phones in an aircraft may be
dangerous for the operation of the aircraft, disrupt themobile phones network and may be illegal.
In hospitals, clinics, other health carecentres and anywhere else where you may bein the close vicinity of medical equipment.
In areas with a potentially explosiveatmosphere (e.g. petrol stations and alsoareas where the air contains dust particles,such as metal powders).
In a vehicle transporting flammable products (even ifthe vehicle is parked) or a vehicle powered by liquefiedpetroleum gas (LPG), check first that the vehiclecomplies with the applicable safety rules.In areas where you are requested to turn off radiotransmitting devices, such as quarries or other areaswhere blasting operations are in progress.
Check electrowill no
PacemakerIf you have a pa• Always keep th
pacemaker whto avoid poten
• Do not carry t• Use the ear op
the potential in• Switch off y
interference is
Hearing aidIf you are a uphysician and whether your cellular phone in
Improved pIn order to imprreduce radio consumption anfollowing guide
For the optimal and satisfactory operation of Battery informationered by a rechargeable battery.er only.
pen the battery.al objects (such as keys in yourcuit the battery contacts.o excessive heat (>60° C orr caustic environments.
d only use Philips Authentic as the use of any other
ay damage your phone and willarantees for your Philips phoneid.arts are replaced immediately by and that they are replaced withcement parts.
hone and your care shown that speaking on thewhile driving lowers your
on, which can be dangerous.he following guidelines:
60
the phone you are recommended to use thephone in the normal operating position(when not using in hands-free mode or witha hands-free accessory).
• Do not expose your phone to extreme temperatures.• Treat the phone with care. Any misuse will void the
International Guarantee.• Do not immerse the phone in any liquid; if your
phone is damp, switch it off, remove the batteryand let them dry for 24hrs before using them again.
• To clean the phone, wipe it with a soft cloth.• Placing and receiving calls consumes the same
amount of battery energy. However, the mobileconsumes less energy in idle screen when kept inthe same place. When in idle screen and while youare moving, your phone consumes energy totransmit updated location information to thenetwork. Setting the backlight for a shorter periodof time as well as avoiding unnecessary navigatingin the menus will also help to save the battery’senergy for longer phoning and stand-byperformances.
• Your phone is pow• Use specified charg• Do not incinerate.• Do not deform or o• Do not allow met
pocket) to short cir• Avoid exposure t
140° F), moisture oYou shoulAccessories,accessories mmake all gunull and vo
Make sure damaged pa qualified techniciangenuine Philips repla
Your mobile pStudies havtelephone concentratiAdhere to t
61
ntal careber to observe the local regulations
ng the disposal of the packagingls, exhausted batteries and old phonease promote their recycling.ked the battery and packaging withls designed to promote the recycling disposal of your eventual waste.
king in the DFU: on to the Consumer
our old productdesigned and manufactured with highs and components, which can besed.
labelled packaging material isclable.
ancial contribution has been madehe associated national packagingvery and recycling system.
plastic material is recyclable (alsotifies the type of plastic).
• Give your full attention to driving. Pull off the roadand park before using the phone.
• Respect the local regulations in countries where youdrive and use your GSM phone.
• If you want to use your phone in a vehicle, installthe hands-free car kit which is designed for thatpurpose.
• Ensure that your phone and car kit do not blockany air bags or other security devices fitted in yourcar.
The use of an alarm system to operate a vehicle's lightor horn to indicate incoming phone calls is prohibitedon public roads in some countries. Check localregulations.
EN 60950 NormIn hot weather or after prolonged exposure to the sun(e.g., behind a window or a windscreen), thetemperature of your phone's casing might increase,especially when featuring a metallic finish. Be verycareful in this case when picking up your phone andalso avoid using it with an ambient temperature over40° C.For your phone, the socket-outlet shall be installednear the phone and shall be accessible.
EnvironmeRememregardimateriaand ple
Philips has marstandard symboand appropriate
WEEE MarInformati
Disposal of yYour product is quality materialrecycled and reu
Therecy
A finto treco
Theiden
When this crossed-out wheeled bin
62
symbol is attached to a product it meansthe product is covered by the EuropeanDirective 2002/96/ECPlease inform yourself about the localseparate collection system for electricaland electronic products.
Please act according to your local rules and do notdispose of your old products with your normalhousehold waste. The correct disposal of your oldproduct will help prevent potential negativeconsequences for the environment and human health.
63
obile has an external antenna, ornetwork operator for assistance/
oesnt respond (or the nds slowly) to key pressessponds more slowly at very lowhis is normal and does not affect the phone. Take the phone to a warmerin. In other cases please contact your
seems to over heatsing a charger that was not intendedMake sure you always use the Philipsry shipped with your phone.
oesnt display the phone coming calls
etwork and subscription dependent.oesn’t send the caller’s number, they Call 1 or Withheld instead. Contact
r detailed information on this subject.
d text messagesdon’t allow message exchanges with First check that you entered theSMS centre, or contact your operatorrmation on this subject.
TroubleshootingThe phone does not switch onRemove/reinstall the battery. Then charge the phoneuntil the battery icon stops scrolling. Unplug fromcharger and try to switch the mobile on.
The display shows BLOCKED when you switch onSomebody tried to use your phone but didn’t knowthe PIN code nor the unblocking code (PUK).Contact your service provider.
The display shows IMSI failureThis problem is related to your subscription. Contactyour operator.
Your phone doesnt return to the idle screenLong press the hangup key or switch off the phone,check that the SIM card and the battery are installedcorrectly and switch it on again.
The network symbol is not displayedThe network connection is lost. Either you are in aradio shadow (in a tunnel or between tall buildings) oryou are outside the network coverage area. Try fromanother place, try to reconnect to the network(especially when abroad), check that the antenna is in
place if your mcontact your information.
The display ddisplay respoThe display retemperatures. Toperation of theplace and try agaphone supplier.
Your batteryYou might be ufor your phone. authentic accesso
Your phone dnumbers of inThis feature is nIf the network dphone will displayour operator fo
You cant senSome networks other networks.number of your for detailed info
You cant receive and/or store JPEG The display shows INSERT YOUR SIM
ard has been inserted in the rightblem remains, your SIM cardontact your operator.
f your phone seems lower the user guideked to your settings (e.g., ringerration) and the features you use.
onomy, and whenever possible,features you do not use.
nt work well in your carny metallic parts that absorbes which can affect the phone’s kit is available to provide younna and enables you to make andithout handling the handset.
horities if you are allowed to useing.
t chargingpletely flat, it might take several
e (up to 5 minutes in some cases)con is displayed on the screen.
64
picturesA picture may not be accepted by your mobile phoneif it is too large, if its name is too long, or if it doesn’thave the correct file format.
You have the feeling that you miss some callsCheck your call divert options.
During battery charge, the battery icon shows no bar and the outline is flashingOnly charge the battery in an environment where thetemperature does not go below 0°C (32°F) or above50°C (113°F).In other cases please contact your phone supplier.
The display shows SIM failureCheck that the SIM card has been inserted in the rightposition. If the problem remains, your SIM card maybe damaged. Contact your operator.
When attempting to use a feature in the menu, the mobile displays NOT ALLOWEDSome features are network dependent. They are onlyavailable, therefore, if the network or yoursubscription supports them. Contact your operatorfor detailed information on this subject.
CARDCheck that the SIM cposition. If the promight be damaged. C
The autonomy othat indicated inThe autonomy is linvolume, backlight duTo increase the autyou must deactivate
Your phone doesA car contains maelectromagnetic wavperformances. A carwith an external antereceive phone calls w
Check with local autthe phone whilst driv
Your phone is noIf your battery is comminutes of pre-chargbefore the charging i
65
Philips Authentic Accessories
Some accessories, such as a battery and a charger, areincluded as standard in the package of your mobilephone. Additional accessories may also be provided orsold separately. Package contents may therefore vary.
To maximise the performance of your Philips mobilephone and not to void the warranty, always purchasePhilips Authentic Accessories that are speciallydesigned for use with your phone. Philips ConsumerElectronics cannot be held liable for any damage dueto use with non authorised accessories.
ChargerCharges your battery in any AC outlet. Small enoughto carry in a briefcase/handbag.
Mono headsetYour phone will activate headset mode automaticallywhen you plug in the headset.
66 Specific Absorption Rate Information
Specific Absorption Rate InformationInternational standards
THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO RADIO WAVES
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits forexposure to radio frequency (RF) energy defined by the international standards. These recommendations have beenestablished by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and, the Instituteof Electrical and Electronics Engineers (IEEE) that forecast a substantial safety margin for assuring the protectionof all persons, regardless of age and health.The exposure recommendations for mobile phones use a measurement unit known as the Specific Absorption Rate(SAR). The SAR limit recommended by the ICNIRP for the mobile phones used by the general public is 2.0W/kg averaged over ten grams of tissue and, is 1,6W/kg averaged over one gram of tissue by IEEE Std 1528 for thehead.Tests for SAR have been conducted using recommended operating positions with the mobile phone transmittingat its highest certified power level in all tested frequency bands. Although the SAR is determined at the highestcertified power level, the actual SAR levels of the mobile phone while operating are generally below the maximumSAR value. This is because the phone is designed to operate at multiple power levels so as to use only the powerrequired to reach the network. In general, the closer you are to a base station antenna, the lower the power output. While there may be differences between the SAR levels of various phones and at various positions, they all meetthe international protection standards for exposure to radio waves. The highest SAR value for this Philips Xenium 9@9v model phone when tested for compliance against thestandard was 0,690 W/kg for ICNIRP recommendation. For limiting the radio waves exposure, it is recommended to reduce the mobile phone call duration or to use aheadset. The purpose of those precautions is to take the mobile phone away from the head and the body.
67
Trademark declaration
T9® is a trademark of TegicCommunications Inc.Tegic Euro. Pat.
App. 0842463
Workmanship During The Limited Warranty
ed warranty period, Philips or itsice representative will, at itsair or replace, without charge for a materially defective Productfurbished parts or Product andired or replaced Product to theorking condition. Philips willarts, modules or equipment.
aced Product will be covered byrranty for the balance of thewarranty period or ninety (90)date of repair or replacement
nger. Repair or replacement ofilips’ option is your exclusive
ered By This Limited Warranty?
ranty does not cover:
t has been subjected to misuse,ipping or other physical damage,nstallation, abnormal operationeglect, inundation, fire, water or intrusion; or
68
Limited warranty1. What Does This Limited Warranty Cover?
Philips warrants to the original retail purchaser(“Consumer” or “You”) that this Philips cellularproduct and all accessories originally provided byPhilips in the sales package (“Product”) are freefrom defects in materials, design andworkmanship under normal use in accordancewith the operating instructions and pursuant tothe following terms and conditions. This limitedwarranty extends only to the Consumer forProducts purchased and used in the originalcountry of purchase. The limited warranty isvalid only in Philips’ intended country of sales ofthe product.
2. How Long is The Limited Warranty Period?
The limited warranty period for the Productextends for ONE (1) YEAR from the date ofpurchase of the Product, documented by validproof of purchase. The limited warranty fororiginal Philips rechargeable battery extends forsix (6) months from the date of purchase.
3. What Will Philips Do if The Product is Not FreeFrom Material Defects in Materials and
Period?
During the limitauthorized servoption either repparts or labour,with new or rereturn such repaConsumer in wretain defective p
Repaired or replthis limited waoriginal limited days from the whichever is loProduct, at Phremedy.
4. What is Not Cov
This limited war
a) Product thaaccident, shimproper ihandling, nother liquid
69
M card must be removed from thet before it is given to Philips. Philipss no liability for damaged or loss of card or the data contained therein.roduct failure is not covered by this warranty, or this limited warranty iscable, void or invalid due to anyand conditions stated herein, the
er will be charged for the cost ofr replacement of the Product and allelated cost incurred in repairing org the Product.
RTANT - you are required to returnduct together with a valid proof of
se which must identify the point ofse, date of purchase, Product modelduct serial number clearly.
ation: This Warranty is The Entire
FOR THE EXPRESSIES SET FORTH ABOVE ANDPLIED BY LAW AND WHICH
BE EXCLUDED OR MODIFIEDMENT, PHILIPS PROVIDES NOARRANTY WHETHER EXPRESSED (WHETHER BY STATUTE,HE OPERATION OF LAW OR
ISE) AND SPECIALLY DISCLAIMS
b) Product that has been damaged due torepair, alteration, or modification by anyonenot authorized by Philips; or
c) Product that has reception or operationproblems caused by signal conditions,network reliability or cable or antennasystems; or
d) Product defects or problems caused by useswith non-Philips products or accessories; or
e) Product which warranty/quality stickers,product serial number or electronic serialnumber has been removed, altered orrendered illegible; or
f) Product purchased, used, serviced, orshipped for repair from outside the originalcountry of purchase, or used for commercialor institutional purposes (including but notlimited to Products used for rentalpurposes); or
g) Product returned without valid proof ofpurchase or which proof of purchase hasbeen altered or is illegible.
h) Normal wear and tear or Force Majeure.
5. How Do You Get Warranty Service?
a) Return the Product to an authorized servicecenter of Philips. You may contact the localPhilips office for the location of the nearestauthorized service center.
b) The SIProducassumethe SIM
c) If the Plimitedinappliterms Consumrepair oother rreplacin
d) IMPOthe Propurchapurchaand Pro
6. Other LimitAgreement.EXCEPT WARRANTTHOSE IMCANNOT BY AGREEOTHER WOR IMPLIUNDER TOTHERW
ANY WARRANTY OF SATISFACTORY ADVISED OF THE POSSIBILTY OF SUCHESE LIMITATIONS SHALL
TWITHSTANDING THETHE ESSENTIAL PURPOSEED REMEDY.
rranty represents the completereement between the Consumer respect to this cellular Product
es all prior agreements betweenal or written, and all others between the parties relating toer of this limited warranty. Noagent, dealer, employee, thereof, Philips is authorized to make this limited warranty and youn any such representation.
arranty does not affect thetutory rights under applicableforce.
70
QUALITY MERCHANTABILITY ORFITNESS FOR A PARTICULAR PURPOSE.PHILIPS’ TOTAL LIABILITY FORDAMAGES RELATING TO OR ARISINGOUT OF THE PURCHASE OR USE OF THEPRODUCT, REGARDLESS OF THE TYPEOR CAUSE OF SUCH DAMAGE OR THEFORM OR CHARACTERISATION OF THECLAIM ASSERTED (E.G. CONTRACT ORTOPIT), SHALL NOT EXCEED THEORIGINAL PURCHASE PRICE PAID FORTHE PRODUCT.
HOWEVER IN NO EVENT SHALL PHILIPSBE LIABLE FOR ANY PUNITIVE, SPECIAL,INCIDENTAL, INDIRECT ORCONSEQUENTIAL DAMAGES (INCLUDINGBUT NOT LIMITED TO THE LOSS OFUSE, LOSS OF TIME, INCONVENIENCE,COMMERIAL LOSS, LOST PROFITS, LOSTBUSINESS OPPORTUNITIES, COST OFSUBSTITUTION OF GOODS ORSERVICES, INVESTMENTS, DAMAGE TOGOODWILL OR REPUTATION, OR LOSSOF DATA AND CLAIMS BY THIRDPARTIES) RESULTING FROM PURCHASEOR USE OF THE PRODUCT, TO THEFULLEST EXTENT ALLOWED BY LAW,WHETHER OR NOT PHILIPS HAS BEEN
DAMAGES. THAPPLY NOFAILURE OF OF ANY LIMIT
This limited waand exclusive agand Philips withand it supercedthe parties, orcommunicationthe subject mattcarrier, retailer, or employee ofmodifications toshould not rely o
This limited wConsumer’s stanational laws in
Declaration of conformity
We, Shenzhen Sang Fei ConsumerCommunications Co., Ltd.11 Science and Technology Road,Shenzhen Hi-tech Industrial Park,Nanshan District, Shenzhen 518057China
declare under our sole responsibility that the productXenium 9@9vCellular Mobile Radio GSM 900/1800TAC: 35175902
to which this declaration relates, is in conformity withthe following Standards:
SAFETY : EN 60950-1: 2001+A11:2004HEALTH: EN50360:2001; EN50361:2001-7EMC: ETSI EN301 489-7 v 1.2.1 SPECTRUM: ETSI EN 301 511 v9.0.2
We hereby declare that all essential radio test suiteshave been carried out and that the above namedproduct is in conformity to all the essentialrequirements of Directive 1999/5/EC.The conformity assessment procedure referred to inArticle 10 and detailed in Annex V of Directive 1999/5/EC has been followed related to articles 3.1 and 3.2with the involvement of the following Notified Body:BABT, Balfour House, Churchfield Road, Waltonon-Thames, KT12 2TQ. UKIdentification mark: 0168
Jan 26, 2008
Quality Manager