direct fired absorption chiller & heater - …lenergy.hu/dokuk/termekek/51/yiw9sd8v.pdf ·...
TRANSCRIPT
DIRECT FIRED ABSORPTION CHILLER & HEATER
MODEL : SAB-DF012~070E1 SAB-DF012~100G1
. CHP Solution IncCHP Solution IncCHP Solution IncCHP Solution Inc
Excellent Performance with More Energy Savings, Excellent Performance with More Energy Savings, Excellent Performance with More Energy Savings, Excellent Performance with More Energy Savings, Excellent EfficExcellent EfficExcellent EfficExcellent Efficiency at iency at iency at iency at Much Lower CostMuch Lower CostMuch Lower CostMuch Lower Cost.... At Cention, basing ourselves on cooling technology and know-how acquired over many years, we put into practice our latest proprietary technology. Through the use of large chilled water/cooling water temperature differential adaptability and provision of a high-functionality microcomputer as a standard control panel, superior reliability and durability are realized, while achieving running efficiency. As an item of new-age cooling equipment Cention’s one step advanced chiller contributes to the realization of total energy-saving and low cost in air-conditioning system. Low Energy and Low CostLow Energy and Low CostLow Energy and Low CostLow Energy and Low Cost -By means of the new cooling water flow system (ACA flow), a standard frame size accommodating large chilled water/cooling water temperature differential is realized. By improvement of control of solution circulating quantity, a 10% improvement in average load factor is achieved in partial load characteristics.
High ReliabilityHigh ReliabilityHigh ReliabilityHigh Reliability -A high functionality microcomputer control panel with a complete set of preventive maintenance and abnormality forecast functions is a standard feature. Standard cooling capability realizing up to 4,000 hrs/yr operation.
Superior Operability and Easy MaintenanceSuperior Operability and Easy MaintenanceSuperior Operability and Easy MaintenanceSuperior Operability and Easy Maintenance -Operating condition or abnormalities are quickly shown on easy-to-see liquid crystal digital and LED displays. Full automation of purging operation is realized by use of water ejector purging device which does not use electricity and can purge out any non-condensed gases. Compatible with air conditioning system interfaces and supports introduction of remote supervision system.
LargeLargeLargeLarge----TemperatureTemperatureTemperatureTemperature----Differential System.Differential System.Differential System.Differential System.
-By using the large-temperature-differential system, the circulating volumes of chilled and cooling water can be reduced. The large-temperature-differential system reduces power needed for circulating air and water, because of reduced volumes of the draught from the air conditioner fan and of the circulating water from the chilled and cooling water pumps. In addition, it makes such facilities as air ducts and chilled/cooling water pipes smaller, and also reduces the initial cost for them.
Efficiency Operation.Efficiency Operation.Efficiency Operation.Efficiency Operation. -In addition to the parallel flow system, Cention's new proprietary flow technology (ACA flow technology) is employed in the cooling water system. Without increasing the chiller frame size, the adaptation to large chilled/cooling water temperature differentials has been made possible. Accordingly, energy-saving and low operating cost (by reduction of start-up and other operating costs) are achieved not only for the chiller but for air-conditioning as well.
High Performance Microcomputer.High Performance Microcomputer.High Performance Microcomputer.High Performance Microcomputer. -Electric power saving with large-temperature differential chilled/cooling water system.
Stable and reliable operation witStable and reliable operation witStable and reliable operation witStable and reliable operation with crystallization freeh crystallization freeh crystallization freeh crystallization free In the parallel flow system, the diluted solution coming out of the absorber is divided into two flows. These two flows of solution are sent to the high-temperature and low-temperature generators separately. The system holds the flow pressure of the high-temperature generator lower than the series flow(indicated by “ ” in the figure), while keeping an enough margin for crystallization in a low-temperature condition (indicated by “ ” in the figure). In addition, the performance of absorption cycle is increased because the rate of solution flow into the high-temperature generator is made lower than that of series flow.
SSSSpecificationspecificationspecificationspecifications
1) 1) 1) 1) High Efficiency Specifications (COP 1.32~1.35 MODEL)
Standard condition(12-7℃℃℃℃/ 32-37℃℃℃℃)(COP 1.32)
Model Item
SAB-DF
012E1 015E1 018E1 021E1 024E1 028E1 032E1
Cooling capacity USRT 120 150 180 210 240 280 320
kW 422 527 633 738 844 985 1,125
Heating capacity Mcal/h 363 436 508 581 678 726 860
kW 422 507 591 676 788 844 1,000
Chilled water
Temperature Inlet 12 Outlet 7
Flow rate /h 72.6 90.7 108.9 127 145.2 169.3 193.5
PD kPa 70 107 73 64 82 61 103
Connection A 100 100 125 125 125 150 150
PASS - Odd Odd Odd Even Even Odd Odd
Cooling water
Temperature Inlet 32 Outlet 37
Flow rate /h 120 150 180 210 240 280 345
PD kPa 74 110 77 67 85 64 80
Connection A 125 125 150 150 150 200 200
PASS - Odd Odd Odd Even Even Odd Odd
Hot water
Inlet temp. 55 55.2 55.3 55.4 55.3 55.7 55.7
Outlet temp 60 60 60 60 60 60 60
Flow rate /h 72.6 90.7 108.9 127 145.2 169.3 193.5
PD kPa 70 107 73 64 82 61 103
Connection A 100 100 125 125 125 150 150
PASS - Odd Odd Odd Even Even Odd Odd
Electric capacity
50Hz kVA 7.8 10.4 10.4 10.0 10.9 10.9 10.9
60Hz kVA 7.7 11.6 11.6 9.9 10.7 10.7 10.7
Electric motor power 60Hz(50Hz)
Sol. Pump kW 1.1+1.1 3.7(2.2)+1.1 3.7(2.2)+1.1 2.2+1.1 2.2+1.1 2.2+1.1 2.2+1.1
Ref. Pump kW 0.2 0.4 0.4 0.4 0.4 0.4 0.4
Burner fan kW 1.5 1.5 1.5 1.5 2.2 2.2 2.2
Gas consumption
(13A)
Cooling N /h 25 31.2 37.4 43.7 49.9 58.2 66.6
Heating N /h 37.8 45.3 52.8 60.4 70.5 75.5 89.4
Input supply
pressure mmAq 200~4000
Exhaust gas connection mm 266X266 355X355 398X364
dimensions (inside)
Length(L) mm 3,353 3,408 3,791 4,591
Width(W) mm 1,955 1,955 1,955 1,955
Height(H) mm 2,419 2,419 2,419 2,419 Operating weight Ton 6.6 7.7 7.8 9.1 10.6 10.6 12.2
Rigging weight Ton 6.2 7.2 7.3 8.4 9.8 9.8 11.3
Insulation area
Hot Surface 16 16 18 20 20 24 24
Cold Surface 8 8 10 12 12 14 14
Contained water
Chilled water 0.2 0.2 0.25 0.3 0.3 0.36 0.36
Cooling water 0.32 0.32 0.38 0.45 0.45 0.54 0.54
Cooling tower type SCTM 175 200 250 300 350 400 400
Standard condition(12-7℃℃℃℃/ 32-37℃℃℃℃)(COP 1.32)
NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply pressure water is 780 kPa G(8 kg/ G). or operation of remote on/off 4. control range for Standard specification (Capacity,
chilled/cooling water) in cooling mode is 100~25%. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N).
6. Exhaust gas of NOX is 45 ppm(O2=5%)
Model Item
SAB-DF
036E1 040E1 045E1 050E1 056E1 063E1 070E1
Cooling capacity USRT 360 400 450 500 560 630 700
kW 1,266 1,407 1,582 1,758 1,969 2,215 2,461
Heating capacity Mcal/h 1,001
1,110 1,252 1,387 1,490 1,665 1,947
kW 1,164 1,291 1,456 1,613 1,733 1,936 2,264
Chilled water
Temperature Inlet 12 Outlet 7
Flow rate /h 217.7 241.9 272.2 302.4 338.7 381.0 423.4
PD kPa 59 59 106 110 67 67 89
Connection A 150 150 200 200 200 200 200
PASS - Odd Odd Odd Odd Even Even Even
Cooling water
Temperature Inlet 32 Outlet 37
Flow rate /h 360 400 450 500 560 630 700
PD kPa 58 116 79 97 46 58 76
Connection A 200 200 250 250 300 300 300
PASS - Odd Even
Odd Odd Even
Even
Even
Hot water
Temperature Inlet 55.4 Outlet 60 55.6 / 60 55.4 / 60
Flow rate /h 217.7 241.9 272.2 302.4 338.7 381.0 423.4
PD kPa 59 59 106 110 67 67 89
Connection A 150 150 200 200 200 200 200
PASS - Odd Odd Odd Odd Even Even Even
Electric capacity
50Hz kVA 14.9 14.9 14.9 14.9 19.3 19.3 19.3
60Hz kVA 15.5 15.5 15.5 15.5 19.6 19.6 19.6
Electric motor power
60Hz(50Hz)
Sol. Pump kW 3.7+2.2 3.7+2.2 3.7+2.2 3.7+2.2 4.5+2.2 4.5+2.2 4.5+2.2
Ref. Pump kW 0.4 0.4 0.4 0.4 0.75 0.75 0.75
Burner fan kW 3.7 3.7 3.7 3.7 5.5 5.5 5.5
Gas consumption
(13A)
Cooling N /h 74.9 83.2 93.6 104 116.5 131 145.6
Heating N /h 104.1 115.4 130.2 144.2 154.9 173.2 202.5
Input supply
pressure mmAq 200 ~ 4,000
Exhaust gas connection mm 440X436 440X524 440X656
440X656 440X788
dimensions (inside)
Length(L) mm 5,034 5,807 7,183 7,883
Width(W) mm 2,131 2,395 2,468 2,468
Height(H) mm 3,102 3,102 3,102 3,102
Operating weight Ton 16.5 16.5 20.6 20.6 25.5 25.5 27.9
Rigging weight Ton 14.9 14.9 18.8 18.8 23.3 23.3 25..5
Insulation area Hot Surface 32 32 36 36 41 41 46
Cold Surface 14 14 17 17 20 20 23
Contained water
Chilled water 0.50 0.50 0.60 0.60 0.71 0.71 0.82
Cooling water 1.06 1.06 1.22 1.22 1.38 1.38 1.54
Cooling tower type SCTM 500 600 600 700 750 900 900
Large temperature differentials condition(15-7℃℃℃℃/ 32-37℃℃℃℃) (COP 1.35)
Model Item
SAB-DF
012EA 015EA 018EA 021EA 024EA 028EA 032EA
Cooling capacity USRT 120 150 180 210 240 280 320
kW 422 527 633 738 844 985 1,125
Heating capacity Mcal/h 363 436 508 581 678 726 860
kW 422 507 591 676 788 844 1,000
Chilled water
Temperature Inlet 15 Outlet 7
Flow rate /h 45.4 56.7 68.0 79.4 90.7 105.8 121
PD kPa 57 87 74 79 102 54 79
Connection A 80 80 100 100 100 125 125
PASS - Odd Odd Odd Even
Even
Even
Even
Cooling water
Temperature Inlet 32 Outlet 37
Flow rate /h 120 150 180 210 240 280 345
PD kPa 74 110 77 67 85 64 80
Connection A 125 125 150 150 150 200 200
PASS - Odd Odd Odd Even
Even
Odd Odd
Hot water
Inlet Temp. 52 52.3 52.5 52.7 52.5 53.1 53.2
Outlet Temp 60 60 60 60 60 60 60
Flow rate /h 45.4 56.7 68.0 79.4 90.7 105.8 121
PD kPa 57 87 74 79 102 54 79
Connection A 80 80 100 100 100 125 125
PASS - Odd Odd Odd Even
Even
Even
Even
Electric
capacity
50Hz kVA 7.8 10.4 10.4 10.0 10.9 10.9 10.9
60Hz kVA 7.7 11.6 11.6 9.9 10.7 10.7 10.7
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 1.1+1.1 3.7(2.2)+1.1 3.7(2.2)+1.1 2.2+1.1 2.2+1.1 2.2+1.1 2.2+1.1
Ref. Pump kW 0.2 0.4 0.4 0.4 0.4 0.4 0.4
Burner fan kW 1.5 1.5 1.5 1.5 2.2 2.2 2.2
Gas
consumption
(13A)
Cooling N /h 24.5 30.6 36.7 42.8 49.0 57.1 65.1
Heating N /h 37.8 45.3 52.8 60.4 70.5 75.5 89.4
Input supply
pressure mmAq 200~4,000
Exhaust gas connection mm 266X266 355X355 398X364
dimensions
(inside)
Length(L) mm 3,353 3,408 3,791 4,591
Width(W) mm 1,955 1,955 1,955 1,955
Height(H) mm 2,419 2,419 2,419 2,419
Operating weight Ton 6.6 7.7 7.8 9.1 10.6 10.6 12.2
Rigging weight Ton 6.2 7.2 7.3 8.4 9.8 9.8 11.3
Insulation
area
Hot Surface 16 16 18 20 20 24 24 Cold Surface 8 8 10 12 12 14 14
Contained
water
Chilled water 0.2 0.2 0.25 0.3 0.3 0.36 0.36 Cooling water 0.32 0.32 0.38 0.45 0.45 0.54 0.54
Cooling tower type SCTM 175 200 250 300 350 400 400
Large temperature differentials condition(15-7℃℃℃℃/ 32-37℃℃℃℃) (COP 1.35)
Model Item
SAB-DF
036EA 040EA 045EA 050EA 056EA 063EA 070EA
Cooling capacity USRT 360 400 450 500 560 630 700
kW 1,266 1,407 1,582 1,758 1,969 2,215 2,461
Heating capacity Mcal/h 1,001 1,110 1,252 1,387 1,490 1,665 1,947
kW 1,164 1,291 1,456 1,613 1,733 1,936 2,264
Chilled water
Temperature Inlet 15 Outlet 7
Flow rate /h 136.1 151.2 170.1 189.0 211.7 238.1 264.6
PD kPa 50 53 92 100 65 82 114
Connection A 125 125 150 150 150 150 150
PASS - Even
Even
Even
Even
Odd Odd Odd
Cooling water
Temperature Inlet 32 Outlet 37
Flow rate /h 360 400 450 500 560 630 700
PD kPa 58 116 79 97 46 58 76
Connection A 200 200 250 250 300 300 300
PASS - Odd Even Odd Odd Even Even Even
Hot water
Temperature. 52.6 / 60 52.7 / 60 52.6 / 60 52.7 / 60 53 / 60 53 / 60 52.6 / 60
Flow rate /h 136.1 151.2 170.1 189.0 211.7 238.1 264.6
PD kPa 50 53 92 100 65 82 114
Connection A 125 125 150 150 150 150 150
PASS - Even
Even
Even
Even
Odd Odd Odd
Electric capacity 50Hz kVA 14.9 14.9 14.9 14.9 19.3 19.3 19.3
60Hz kVA 15.5 15.5 15.5 15.5 19.6 19.6 19.6
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 3.7+2.2 3.7+2.2 3.7+2.2 3.7+2.2 4.5+2.2 4.5+2.2 4.5+2.2
Ref. Pump kW 0.4 0.4 0.4 0.4 0.75 0.75 0.75
Burner fan kW 3.7 3.7 3.7 3.7 5.5 5.5 5.5
Gas consumption
(13A)
Cooling N /h 74.9 83.2 93.6 104 116.5 131 145.6
Heating N /h 104.1 115.4 130.2 144.2 154.9 173.2 202.5
Input supply
pressure mmAq 200 ~ 4,000
Exhaust gas connection mm 440X436 440X524 440X656 440X788
Dimensions
(inside)
Length(L) mm 5,034 5,807 7,183 7,883
Width(W) mm 2,131 2,395 2,468 2,468
Height(H) mm 3,102 3,102 3,102 3,102
Operating weight Ton 16.5 16.5 20.6 20.6 25.5 25.5 27.9
Rigging weight Ton 14.9 14.9 18.8 18.8 23.3 23.3 25..5
Insulation area Hot Surface 32 32 36 36 41 41 46
Cold Surface 14 14 17 17 20 20 23
Contained
water
Chilled water 0.50 0.50 0.60 0.60 0.71 0.71 0.82
Cooling water 1.06 1.06 1.22 1.22 1.38 1.38 1.54
Cooling tower type SCTM 500 600 600 700 750 900 900 NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply pressure water is 780 kPa G(8 kg/ G). or operation of remote on/off 4. control range for Standard specification (Capacity, 10. If you use the oil fuel(light oil), combustion system should be changed
chilled/cooling water) in cooling mode is 100~25%. from over 360RT. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N).
6. Exhaust gas of NOX is 45 ppm(O2=5%)
2) 2) 2) 2) Standard Efficiency Specifications (COP 1.2 MODEL)
Standard condition (12-7℃℃℃℃/32-37℃℃℃℃)
Model Item
SAB-DF
012G1 015G1 018G1 021G1 024G1 028G1 032G1
Cooling capacity USRT 120 150 180 210 240 280 320
kW 422 527 633 738 844 985 1,125
Heating capacity Mcal/h 332 430 462 584 670 745 860
kW 386 500 537 679 779 866 1,000
Chilled water
Temperature Inlet 12 Outlet 7
Flow rate /h 72.6 90.7 108.9 127.0 145.2 169.3 193.5
Pressure kPa 68 85 87 82 88 96 101
Connection A 100 100 125 125 125 150 150
PASS - Even
Even
Odd Even
Even
Odd Odd
Cooling water
Temperature Inlet 32 Outlet 37
Flow rate /h 130 162 195 228 260 303 345
Pressure kPa 97 88 84 93 95 93 80
Connection A 125 125 150 150 150 200 200
PASS - Odd Even Odd Even Even Odd Odd
Hot water
Temperature Inlet 55.4 Outlet 60 Inlet 55.6 , Outlet 60
Flow rate /h 72.6 90.7 108.9 127.0 145.2 169.3 193.5
Pressure kPa 68 85 87 82 88 96 101
Connection A 100 100 125 125 125 150 150
PASS - Even Even Odd Even Even Odd Odd
Electric
capacity
50Hz kVA 7.9 9.8 10.2 10.3 11.3 14.9 14.9
60Hz kVA 7.8 9.7 10.1 10.2 11.1 16.4 16.4
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 1.1+1.1 2.2+1.1 2.2+1.1 3.7 3.7 5.5 5.5
Ref. Pump kW 0.2 0.2 0.4 0.4 0.4 0.4 0.4
Burner fan kW 1.5 1.5 1.5 1.5 2.2 3.7 3.7
Gas
consumption
(13A)
Cooling N /h 28.3 35.4 42.5 49.6 56.6 66.1 75.5
Heating N /h 34.6 44.8 48.1 63.7 69.7 77.5 89.4
Input supply
pressure mmAq 200~4,000
Exhaust gas connection mm 440X216 440X304 440X436
Dimensions
(inside)
Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950
Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988
Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248
Operating weight Ton 6.4 6.8 7.9 8.6 9.4 11.9 12.2
Rigging weight Ton 6.0 6.4 7.4 8.1 8.8 11.2 11.5
Insulation
area
Hot Surface 13 14 15 16 18 20 20
Cold Surface 7 7 8 10 10 12 12
Contained
water
Chilled water 0.138 0.148 0.183 0.203 0.219 0.253 0.273
Cooling water 0.233 0.27 0.344 0.372 0.432 0.465 0.539
Cooling tower type SCTM 175 200 250 300 350 400 400
Standard condition (12-7℃℃℃℃/32-37.3℃℃℃℃)
Model Item
SAB-DF
036G1 040G1 045G1 050G1 056G1 060G1 070G1
Cooling capacity USRT 360 400 450 500 560 600 700
kW 1,266 1,407 1,582 1,758 1,969 2,110 2,461
Heating capacity Mcal/h 1,110 1,110 1,387 1,387 1,665 1,665 1,947
kW 1,291 1,291 1,613 1,613 1,936 1,936 2,264
Chilled water
Temperature Inlet 12 Outlet 7
Flow rate /h 217.7 241.9 272.2 302.4 338.7 362.9 423.4
PD kPa 116 118 114 117 65 63 55
Connection A 150 150 200 200 200 200 200
PASS - Odd Odd Odd Odd Even Even Even
Cooling water
Temperature Inlet 32 Outlet 37.3
Flow rate /h 360 400 450 500 560 600 700
Pressure kPa 89 92 94 101 161 162 157
Connection A 200 200 250 250 300 300 300
PASS - Odd Odd Odd Odd Odd Odd Odd
Hot water
Temperature 54.9/60 55.4/60 54.9/60 55.4/60 55.1/60 55.4/60 55.4/60
Flow rate /h 217.7 241.9 272.2 302.4 338.7 362.9 423.4
PD kPa 116 118 114 117 65 63 55
Connection A 150 150 200 200 200 200 200
PASS - Odd Odd Odd Odd Even Even Even
Electric
capacity
50Hz kVA 18.8 18.8 22.9 22.9 29.7 29.7 33.5
60Hz kVA 17.8 17.8 23.2 23.2 30.2 30.2 33.7
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 4.5+2.2 4.5+2.2 5.5+3.7 5.5+3.7 7.5+3.7 7.5+3.7 7.5+3.7
Ref. Pump kW 0.75 0.75 1.5 1.5 1.5 1.5 1.5
Burner fan kW 3.7 3.7 3.7 3.7 5.5 5.5 5.5
Gas
consumption
(13A
Cooling N /h 82.5 91.6 103.1 114.5 128.3 137.5 160.4
Heating N /h 115.5 115.5 144.3 144.3 173.2 173.2 202.5
Input supply
pressure mmAq 200~10,000
10,000 Exhaust gas connection mm 440X436 440X520 440X788
Dimensions
(inside)
Length(L) mm 5,150 5,150 5,920 6,100
Width(W) mm 2,440 2,480 2,550 3,350
Height(H) mm 2,650 2,940 3,040 3,480
Operating weight Ton 15.5 16.1 18.4 19.1 22.0 23.3 33.4
Rigging weight Ton 14.0 14.5 16.5 17.1 19.8 21.0 30.2
Insulation
area
Hot Surface 33 33 37 37 44 44 47
Cold Surface 13 13 16 16 19 19 22
Contained
water
Chilled water 0.53 0.56 0.65 0.68 0.74 0.77 0.98
Cooling water 1.14 1.2 1.4 1.46 1.65 1.73 2.5
Cooling tower type SCTM 500 600 600 700 750 900 900 NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply pressure water is 780 kPa G(8 kg/ G). or operation of remote on/off control 4. control range for Standard specification (Capacity,
chilled/cooling water) in cooling mode is 100~25%. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N).
6. Exhaust gas of NOX is 45 ppm(O2=5%)
Standard condition (12-7℃℃℃℃/32-37.3℃℃℃℃)
Model Item
SAB-DF
080G1 090G1 100G1
Cooling capacity USRT 800 900 1,000
kW 2,813 3,165 3,516
Heating capacity Mcal/h 2,318 2,318 2,800
kW 2,695 2,695 3,256
Chilled water
Temperature Inlet 12 Outlet 7
Flow rate /h 483.8 544.3 604.8
PD kPa 60 100 104
Connection A 250 250 250
PASS - Even Even Even
Cooling water
Temperature 32 / 37.3 32 / 37.9
Flow rate /h 800 820 900
PD kPa 130 182 184
Connection A 350 350 350
PASS - Odd Odd Odd
Hot water
Temperature 55.2/60 55.7/60 55.4/60
Flow rate /h 483.8 544.3 604.8
PD kPa 60 100 104
Connection A 250 250 250
PASS - Even Even Even
Electric
capacity
50Hz kVA 35.9 43.9 43.9
60Hz kVA 36.0 42.8 42.8
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 7.5+3.7 7.5+5.5 7.5+5.5
Ref. Pump kW 1.5 1.5 1.5
Burner fan kW 7.5 7.5 7.5
Gas
consumption
(13A)
Cooling N /h 188.8 212.4 236.0
Heating N /h 241.1 241.1 291.2
Input supply
pressure mmAq 200~10,000
Exhaust gas connection mm 440x788 440x1096
Dimensions
(inside)
Length(L) mm 6,400 7,250
Width(W) mm 3,350 3,350
Height(H) mm 3,480 3,480
Operating weight Ton 36.9 43.3 44
Rigging weight Ton 33.5 39.7 40.2
Insulation
area
Hot Surface 54 60 67
Cold Surface 25 28 31
Contained
water
Chilled water 1.03 1.11 1.17
Cooling water 2.62 2.85 2.98
Cooling tower type SCTM 1,200 1,400 1,600
Large temperature differentials condition(15-7℃℃℃℃/ 32-37℃℃℃℃)
Model Item
SAB-DF
012GA 015GA 018GA 021GA 024GA 028GA 032GA
Cooling capacity USRT 120 150 180 210 240 280 320
kW 422 527 633 738 844 985 1,125
Heating capacity Mcal/h 332 430 462 584 670 745 860
kW 386 500 537 679 779 866 1,000
Chilled water
Temperature Inlet 15 Outlet 7
Flow rate /h 45.4 56.7 68 79.4 90.7 105.8 121
PD kPa 58 74 98 67 72 74 79
Connection A 80 80 100 100 100 125 125
PASS - Even Even Odd Odd Odd Even Even
Cooling water
Temperature Inlet 32 Outlet 37
Flow rate /h 130 162 195 228 260 303 345
PD kPa 97 88 84 93 95 93 80
Connection A 125 125 150 150 150 200 200
PASS - Odd Even Odd Even Even Odd Odd
Hot water
Temperature 52.7 / 60 52.4 / 60 53.2 / 60 52.6 / 60 52.6 / 60 53 / 60 52.9 / 60
Flow rate /h 45.4 56.7 68 79.4 90.7 105.8 121
PD kPa 58 74 98 67 72 74 79
Connection A 80 80 100 100 100 125 125
PASS - Even Even Odd Odd Odd Even Even
Electric
capacity
50Hz kVA 7.9 9.8 10.2 10.3 11.3 14.9 14.9
60Hz kVA 7.8 9.7 10.1 10.2 11.1 16.4 16.4
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 1.1+1.1 2.2+1.1 2.2+1.1 3.7 3.7 5.5 5.5
Ref. Pump kW 0.2 0.2 0.4 0.4 0.4 0.4 0.4
Burner fan kW 1.5 1.5 1.5 1.5 2.2 3.7 3.7
Gas
consumption
(13A)
Cooling N /h 28.3 35.4 42.5 49.6 56.6 66.1 75.5
Heating N /h 34.6 44.8 48.1 63.7 69.7 77.5 89.4
Input supply
pressure
mmAq 200~4,000
Exhaust gas connection mm 440X216 440X304 440X436
Dimensions
(inside)
Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950
Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988
Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248
Operating weight Ton 6.4 6.8 7.9 8.6 9.4 11.9 12.2
Rigging weight Ton 6.0 6.4 7.4 8.1 8.8 11.2 11.5
Insulation area Hot Surface 13 14 15 16 18 20 20
Cold Surface 7 7 8 10 10 12 12
Contained
water
Chilled water 0.138 0.148 0.183 0.203 0.219 0.253 0.273
Cooling water 0.233 0.27 0.344 0.372 0.432 0.465 0.539
Cooling tower type SCTM 175 200 250 300 350 400 400
Large temperature differentials condition(15-7℃℃℃℃/ 32-37.3℃℃℃℃)
Model Item
SAB-DF
036GA 040GA 045GA 050GA 056GA 060GA 070GA
Cooling capacity USRT 360 400 450 500 560 600 700
kW 1,266 1,407 1,582 1,758 1,969 2,110 2,461
Heating capacity Mcal/h 1,110 1,110 1,387 1,387 1,665 1,665 1,947
kW 1,291 1,291 1,613 1,613 1,936 1,936 2,264
Chilled water
Temperature Inlet 15 Outlet 7
Flow rate /h 136.1 151.2 170.1 189.0 211.7 226.8 264.6
PD kPa 111 113 109 112 87 84 73
Connection A 125 125 150 150 150 150 150
PASS - Even Even Even Even Odd Odd Odd
Cooling water
Temperature Inlet 32 Outlet 37.3
Flow rate /h 360 400 450 500 560 600 700
PD kPa 89 92 94 101 161 162 157
Connection A 200 200 250 250 300 300 300
PASS - Odd Odd Odd Odd Odd Odd Odd
Hot water
Temperature 51.8/60 52.7/60 51.8/60 52.7/60 52.1/60 52.7/60 52.6/60
Flow rate /h 136.1 151.2 170.1 189.0 211.7 226.8 264.6
PD kPa 111 113 109 112 87 84 73
Connection A 125 125 150 150 150 150 150
PASS - Even Even Even Even Odd Odd Odd
Electric
capacity
50Hz kVA 18.8 18.8 22.9 22.9 29.7 29.7 33.5
60Hz kVA 17.8 17.8 23.2 23.2 30.2 30.2 33.7
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 4.5+2.2 4.5+2.2 5.5+3.7 5.5+3.7 7.5+3.7 7.5+3.7 7.5+3.7
Ref. Pump kW 0.75 0.75 1.5 1.5 1.5 1.5 1.5
Burner fan kW 3.7 3.7 3.7 3.7 5.5 5.5 5.5
Gas
consumption
(13A)
Cooling N /h 82.5 91.6 103.1 114.5 128.3 137.5 160.4
Heating N /h 115.5 115.5 144.3 144.3 173.2 173.2 202.5
Input supply
pressure mmAq 200~10,000
10,000 Exhaust gas connection mm 440X436 440X520 440X788
Dimensions
(inside)
Length(L) mm 5,150 5,150 5,920 6,100
Width(W) mm 2,440 2,480 2,550 3,350
Height(H) mm 2,650 2,940 3,040 3,480
Operating weight Ton 15.5 16.1 18.4 19.1 22.0 23.3 33.4
Rigging weight Ton 14.0 14.5 16.5 17.1 19.8 21.0 30.2
Insulation
area
Hot Surface 33 33 37 37 44 44 47
Cold Surface 13 13 16 16 19 19 22
Contained
water
Chilled water 0.53 0.56 0.65 0.68 0.74 0.77 0.98
Cooling water 1.14 1.2 1.4 1.46 1.65 1.73 2.5
Cooling tower type SCTM 500 600 600 700 750 900 900 NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Dimension of gas pipe is changed by gas supply pressure water is 780 kPa G(8 kg/ G). or operation of remote on/off 4. control range for Standard specification (Capacity,
chilled/cooling water) in cooling mode is 100~25%. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N).
6. Exhaust gas of NOX is 45 ppm(O2=5%)
Large temperature differentials condition(15-7℃℃℃℃/ 32-37.3℃℃℃℃)
Model Item
SAB-DF
080GA 090GA 100GA
Cooling capacity USRT 800 900 1000
kW 2813 3165 3516
Heating capacity Mcal/h 2318 2318 2800
kW 2695 2695 3256
Chilled water
Temperature Inlet 15 Outlet 7
Flow rate /h 302.4 340.2 378
PD kPa 80 133 138
Connection A 200 200 200
PASS - Odd Odd Odd
Cooling water
Temperature 32 / 37.3 32 / 37.9
Flow rate /h 800 820 900
PD kPa 130 182 184
Connection A 350 350 350
PASS - Odd Odd Odd
Hot water
Temperature 55.2/60 55.7/60 55.4/60
Flow rate /h 302.4 340.2 378
PD kPa 80 133 138
Connection A 200 200 200
PASS - Odd Odd Odd
Electric capacity 50Hz kVA 35.9 43.9 43.9
60Hz kVA 36.0 42.8 42.8
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 7.5+3.7 7.5+5.5 7.5+5.5
Ref. Pump kW 1.5 1.5 1.5
Burner fan kW 7.5 7.5 7.5
Gas
consumption
(13A)
Cooling N /h 183.3 206.2 229.1
Heating N /h 241.1 241.1 291.2
Input supply
pressure mmAq 200~10,000
Exhaust gas connection mm 440x788 440x1096
Dimensions
(inside)
Length(L) mm 6,400 7,250
Width(W) mm 3,350 3,350
Height(H) mm 3,480 3,480
Operating weight Ton 36.9 43.3 44
Rigging weight Ton 33.5 39.7 40.2
Insulation
area
Hot Surface 54 60 67
Cold Surface 25 28 31
Contained
water
Chilled water 1.03 1.11 1.17
Cooling water 2.62 2.85 2.98
Cooling tower type SCTM 1,200 1,400 1,600
3) Heating Increase Specifications(120~900RT COP 1.2 MODEL)3) Heating Increase Specifications(120~900RT COP 1.2 MODEL)3) Heating Increase Specifications(120~900RT COP 1.2 MODEL)3) Heating Increase Specifications(120~900RT COP 1.2 MODEL)
Heating increase Standard condition(12-7℃℃℃℃/32-37℃℃℃℃)
Model Item
SAB-DH
012G0 015G0 018G0 021G0 024G0 028G0 032G0
Cooling capacity USRT 120 150 180 210 240 280 320
kW 422 527 633 738 844 985 1,125
Heating capacity Mcal/h 430 554 670 670 860 1,110 1,110
kW 500 644 779 779 1,000 1,291 1,291
Chilled water
Temperature Inlet 12 Outlet 7
Flow rate /h 72.6 90.7 108.9 127.0 145.2 169.3 193.5
PD kPa 68 85 87 82 88 96 101
Connection A 100 100 125 125 125 150 150
PASS - Even Even Odd Even Even Odd Odd
Cooling water
Temperature Inlet 32 Outlet 37
Flow rate /h 130 162 195 228 260 303 345
PD kPa 97 88 84 93 95 93 80
Connection A 125 125 150 150 150 200 200
PASS - Odd Even Odd Even Even Odd Odd
Hot water
Temperature 54.1/60 53.9/60 53.8/60 54.7/60 54.1/60 53.4/60 54.3/60
Flow rate /h 72.6 90.7 108.9 127.0 145.2 169.3 193.5
PD kPa 68 85 87 82 88 96 103
Connection A 100 100 125 125 125 150 150
PASS - Even Even Odd Even Even Odd Odd
Electric capacity 50Hz kVA 7.9 9.8 10.2 10.3 11.3 14.9 14.9
60Hz kVA 7.8 9.7 10.1 10.2 11.1 16.4 16.4
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 1.1+1.1 2.2+1.1 2.2+1.1 3.7 3.7 5.5 5.5
Ref. Pump kW 0.2 0.2 0.4 0.4 0.4 0.4 0.4
Burner fan kW 1.5 1.5 1.5 1.5 2.2 3.7 3.7
Gas
consumption
(13A)
Cooling N /h 28.3 35.4 42.5 49.6 56.6 66.1 75.5
Heating N /h 44.7 57.6 69.7 69.7 89.4 115.4 115.4
Input supply
pressure mmAq 200~4,000
Exhaust gas connection mm 440X216 440X304 440X436
Dimensions
(inside)
Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950
Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988
Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248
Operating weight Ton 6.4 6.8 7.9 8.6 9.4 11.9 12.2
Rigging weight Ton 6.0 6.4 7.4 8.1 8.8 11.2 11.5
Insulation area Hot Surface 13 14 15 16 18 20 20
Cold Surface 7 7 8 10 10 12 12
Contained
water
Chilled water 0.138 0.148 0.183 0.203 0.219 0.253 0.273
Cooling water 0.233 0.27 0.344 0.372 0.432 0.465 0.539
Cooling tower type SCTM 175 200 250 300 350 400 400
Heating increase Standard condition (12(12(12(12----7777℃℃℃℃/32/32/32/32----37373737.3.3.3.3℃℃℃℃))))
Model
Item
SAB-DH
036G0 040G0 045G0 050G0 056G0 060G0 070G0
Cooling capacity USRT 360 400 450 500 560 600 700
kW 1,266 1,407 1,582 1,758 1,969 2,110 2,461
Heating capacity Mcal/h 1,387 1,387 1,665 1,665 1,947 1,947 2,318
kW 1,613 1,613 1,936 1,936 2,264 2,264 2,695
Chilled water
Temperature Inlet 12 Outlet 7
Flow rate /h 217.7 241.9 272.2 302.4 338.7 362.9 423.4
PD kPa 116 118 114 117 65 63 55
Connection A 150 150 200 200 200 200 200
PASS - Odd Odd Odd Odd Even Even Even
Cooling water
Temperature Inlet 32 Outlet 37.3
Flow rate /h 360 400 450 500 560 600 700
PD kPa 89 92 94 101 161 162 157
Connection A 200 200 250 250 300 300 300
PASS - Odd Odd Odd Odd Odd Odd Odd
Hot water
Temperature 53.6/60 54.3/60 53.9/60 54.5/60 54.3/60 54.6/60 54.5/60
Flow rate /h 217.7 241.9 272.2 302.4 338.7 362.9 423.4
PD kPa 116 118 114 117 65 63 55
Connection A 150 150 200 200 200 200 200
PASS - Odd Odd Odd Odd Even Even Even
Electric capacity 50Hz kVA 18.8 22.9 29.7 33.5
60Hz kVA 17.8 23.2 30.2 33.7
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 4.5+2.2 5.5+3.7 7.5+3.7
Ref. Pump kW 0.75 1.5 1.5
Burner fan kW 3.7 3.7 5.5
Gas consumption
(13A)
Cooling N /h 82.5 91.6 103.1 114.5 128.3 137.5 160.4
Heating N /h 144.2 144.2 173.2 173.2 202.5 202.5 241.1
Input supply
pressure mmAq 200 ~ 10,000
Exhaust gas connection mm 440X436 440X524 440X788
Dimensions
(inside)
Length(L) mm 5,150 5,150 5,920 6,100
Width(W) mm 2,440 2,480 2,550 3,350
Height(H) mm 2,650 2,940 3,040 3,480
Operating weight Ton 15.5 16.1 18.4 19.1 22.0 23.3 33.4
Rigging weight Ton 14.0 14.5 16.5 17.1 19.8 21.0 30.2
Insulation area Hot Surface 33 33 37 37 44 44 47
Cold Surface 13 13 16 16 19 19 22
Contained
water
Chilled water 0.53 0.56 0.65 0.68 0.74 0.77 0.98
Cooling water 1.14 1.2 1.4 1.46 1.65 1.73 2.5
Cooling tower type SCTM 500 600 600 700 750 900 900 NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Heating increase standard condition is just raising the heating calorie. water is 780 kPa G(8 kg/ G). 10. Hot generator is changed for heating increase standard condition therefore 4. control range for Standard specification (Capacity, should check connection between the burner and the combustion system.
chilled/cooling water) in cooling mode is 100~25%. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N).
6. Exhaust gas of NOX is 45 ppm(O2=5%)
Heating increase Standard condition (12-7℃℃℃℃/32-37.3℃℃℃℃)
Model Item
SAB-DH
080G0 090G0
Cooling capacity USRT 800 900
kW 2813 3165
Heating capacity Mcal/h 2800 2800
kW 3256 3256
Chilled water
Temperature Inlet 12 Outlet 7
Flow rate /h 483.8 544.3
PD kPa 60 100
Connection A 250 250
PASS - Even Even
Cooling water
Temperature 32 / 37.3 32 / 37.9
Flow rate /h 800 820
PD kPa 130 182
Connection A 350 350
PASS - Odd Odd
Hot water
Temperature 54.2 / 60 54.9 / 60
Flow rate /h 483.8 544.3
PD kPa 60 100
Connection A 250 250
PASS - Even Even
Electric capacity 50Hz kVA 35.9 43.9
60Hz kVA 36.0 42.8
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 7.5+3.7 7.5+5.5
Ref. Pump kW 1.5 1.5
Burner fan kW 7.5 7.5
Gas consumption
(13A)
Cooling N /h 188.8 212.4
Heating N /h 291.2 291.2
Input supply
pressure mmAq 10,000
Exhaust gas connection mm 440x788 440x1096
Dimensions
(inside)
Length(L) mm 6,400 7,250
Width(W) mm 3,350 3,350
Height(H) mm 3,480 3,480
Operating weight Ton 36.9 43.3
Rigging weight Ton 33.5 39.7
Insulating area Hot Surface 54 60
Cold Surface 25 28
Contained
water
Chilled water 1.03 1.11
Cooling water 2.62 2.85
Cooling tower type SCTM 1,200 1,400
Heating increase Large temperature differentials condition (15-7℃℃℃℃/32-37℃℃℃℃)
Model Item
SAB-DH
012GA 015GA 018GA 021GA 024GA 028GA 032GA
Cooling capacity USRT 120 150 180 210 240 280 320
kW 422 527 633 738 844 985 1,125
Heating capacity Mcal/h 430 554 670 670 860 1,110 1,110
kW 500 644 779 779 1,000 1,291 1,291
Chilled water
Temperature Inlet 15 Outlet 7
Flow rate /h 45.4 56.7 68 79.4 90.7 105.8 121.0
PD kPa 58 74 98 67 72 74 79
Connection A 80 80 100 100 100 125 125
PASS - Even Even Odd Odd Odd Even Even
Cooling water
Temperature Inlet 32 Outlet 37
Flow rate /h 130 162 195 228 260 303 345
PD kPa 97 88 84 93 95 93 80
Connection A 125 125 150 150 150 200 200
PASS - Odd Even Odd Even Even Odd Odd
Hot water
Temperature 50.5/60 50.2/60 50.2/60 51.6/60 50.5/60 49.5/60 50.8/60
Flow rate /h 45.4 56.7 68 79.4 90.7 105.8 121.0
PD kPa 58 74 98 67 72 74 79
Connection A 80 80 100 100 100 125 125
PASS - Even Even Odd Odd Odd Even Even
Electric capacity 50Hz kVA 7.9 9.8 10.2 10.3 11.3 14.9 14.9
60Hz kVA 7.8 9.7 10.1 10.2 11.1 16.4 16.4
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 1.1+1.1 2.2+1.1 2.2+1.1 3.7 3.7 5.5 5.5
Ref. Pump kW 0.2 0.2 0.4 0.4 0.4 0.4 0.4
Burner fan kW 1.5 1.5 1.5 1.5 2.2 3.7 3.7
Gas consumption
(13A)
Cooling N /h 28.3 35.4 42.5 49.6 56.6 66.1 75.5
Heating N /h 44.7 57.6 69.7 69.7 89.4 115.4 115.4
Input supply
pressure mmAq 200~4,000
Exhaust gas connection mm 440X216 440X304 440X436
Dimensions
(inside)
Length(L) mm 3,350 3,590 3,790 4,150 4,410 4,950 4,950
Width(W) mm 1,925 1,925 1,925 1,925 1,925 1,988 1,988
Height(H) mm 2,170 2,170 2,170 2,170 2,170 2,248 2,248
Operating weight Ton 6.4 6.8 7.9 8.6 9.4 11.9 12.2
Rigging weight Ton 6.0 6.4 7.4 8.1 8.8 11.2 11.5
Insulating area Hot Surface 13 14 15 16 18 20 20
Cold Surface 7 7 8 10 10 12 12
Contained
water
Chilled water 0.138 0.148 0.183 0.203 0.219 0.253 0.273
Cooling water 0.233 0.27 0.344 0.372 0.432 0.465 0.539
Cooling tower type SCTM 175 200 250 300 350 400 400
Heating increase Large temperature differentials condition (15(15(15(15----7777℃℃℃℃/32/32/32/32----37.337.337.337.3℃℃℃℃))))
Model
Item
SAB-DH
036GA 040GA 045GA 050GA 056GA 060GA 070GA
Cooling capacity USRT 360 400 450 500 560 600 700
kW 1,266 1,407 1,582 1,758 1,969 2,110 2,461
Heating capacity Mcal/h 1,387 1,387 1,665 1,665 1,947 1,947 2,318
kW 1,613 1,613 1,936 1,936 2,264 2,264 2,695
Chilled water
Temperature Inlet 15 Outlet 7
Flow rate /h 136.1 151.2 170.1 189.0 211.7 226.8 264.6
PD kPa 111 113 109 112 87 84 73
Connection A 125 125 150 150 150 150 150
PASS - Even Even Even Even Odd Odd Odd
Cooling water
Temperature Inlet 32 Outlet 37.3
Flow rate /h 360 400 450 500 560 600 700
PD kPa 89 92 94 101 161 162 157
Connection A 200 200 250 250 300 300 300
PASS - Odd Odd Odd Odd Odd Odd Odd
Hot water
Temperature 49.8/60 50.8/60 50.2/60 51.2/60 50.8/60 51.4/60 51.2/60
Flow rate /h 136.1 151.2 170.1 189.0 211.7 226.8 264.6
PD kPa 111 113 109 112 87 84 73
Connection A 125 125 150 150 150 150 150
PASS - Even Even Even Even Odd Odd Odd
Electric capacity 50Hz kVA 18.8 22.9 29.7 33.5
60Hz kVA 17.8 23.2 30.2 33.7
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 4.5+2.2 5.5+3.7 7.5+3.7
Ref. Pump kW 0.75 1.5 1.5
Burner fan kW 3.7 3.7 5.5
Gas consumption
(13A)
Cooling N /h 82.5 91.6 103.1 114.5 128.3 137.5 160.4
Heating N /h 144.2 144.2 173.2 173.2 202.5 202.5 241.1
Input supply
pressure mmAq 200~10,000
Exhaust gas connection mm 440X436 440X524 440X788
Dimensions
(inside)
Length(L) mm 5,150 5,150 5,920 6,100
Width(W) mm 2,440 2,480 2,550 3,350
Height(H) mm 2,650 2,940 3,040 3,480
Operating weight Ton 15.5 16.1 18.4 19.1 22.0 23.3 33.4
Rigging weight Ton 14.0 14.5 16.5 17.1 19.8 21.0 30.2
Insulating area Hot Surface 33 33 37 37 44 44 47
Cold Surface 13 13 16 16 19 19 22
Contained
water
Chilled water 0.53 0.56 0.65 0.68 0.74 0.77 0.98
Cooling water 1.14 1.2 1.4 1.46 1.65 1.73 2.5
Cooling tower type SCTM 500 600 600 700 750 900 900 NOTES 1.(1 USRT) is 3,516 kW(3,024 kcal/h) 7. Inlet of chilled/hot/cooling water are all A side 2. Fouling factor (chilled/hot/cooling water) is Outlet is B side for Odd PASS and A side for Even PASS 0.000086 K/W(0.0001 h /kcal) 8. If supply pressure of 13A is 98kpa, Combustion system should be changed 3. Maximum permissible pressure for chilled/hot/cooling 9. Heating increase standard condition is just raising the heating calorie. water is 780 kPa G(8 kg/ G). 10. Hot generator is changed for heating increase standard condition therefore 4. control range for Standard specification (Capacity, should check connection between the burner and the combustion system.
chilled/cooling water) in cooling mode is 100~25%. 5. Caloric value of 13A gas is 46 MJ/ N(11,000 kcal/ N).
6. Exhaust gas of NOX is 45 ppm(O2=5%)
Heating increase Large temperature differentials condition (15-7℃℃℃℃/32-37.3℃℃℃℃)
Model Item
SAB-DH
080GA 090GA
Cooling capacity USRT 800 900
kW 2,813 3,165
Heating capacity Mcal/h 2,800 2,800
kW 3,256 3,256
Chilled water
Temperature Inlet 15 Outlet 7
Flow rate /h 302.4 340.2
PD kPa 80 133
Connection A 250 250
PASS - Even Even
Cooling water
Temperature 32 / 37.3 32 / 37.9
Flow rate /h 800 820
PD kPa 130 182
Connection A 350 350
PASS - Odd Odd
Hot water
Temperature 50.7 / 60 51.8 / 60
Flow rate /h 302.4 340.2
PD kPa 80 133
Connection A 250 250
PASS - Even Even
Electric capacity 50Hz kVA 35.9 43.9
60Hz kVA 36.0 42.8
Electric motor
power
60Hz(50Hz)
Sol. Pump kW 7.5+3.7 7.5+5.5
Ref. Pump kW 1.5 1.5
Burner fan kW 7.5 7.5
Gas consumption
(13A)
Cooling N /h 188.8 212.4
Heating N /h 291.2 291.2
Input supply
pressure mmAq 200~10,000
Exhaust gas connection mm 440x788 440x1096
Dimensions
(inside)
Length(L) mm 6,400 7,250
Width(W) mm 3,350 3,350
Height(H) mm 3,480 3,480
Operating weight Ton 36.9 43.3
Rigging weight Ton 33.5 39.7
Insulating area Hot Surface 54 60
Cold Surface 25 28
Contained
water
Chilled water 1.03 1.11
Cooling water 2.62 2.85
Cooling tower type SCTM 1,200 1,400
External dimensionsExternal dimensionsExternal dimensionsExternal dimensions
Please refer to the specifications in p.4-7 for actual dimensions values of each model.
Directions of outlet nozzle is on side B when the number of passes is odd number and on side A when it is even
number above drawings.
High efficiency EHigh efficiency EHigh efficiency EHigh efficiency E----series series series series
MODEL 012E1/
015E1 018E1
021E1/
024E1
028E1/
032E1
036E1/
040E1
045E1/
050E1
056E1/
063E1 070E1
L 3,353 3,408 3,791 4,591 5,034 5,807 6,807 7,807
W 1,955 1,955 1,955 1,955 2,068 2,131 2,391 2,464
H 2,419 2,419 2,419 2,419 3,102 3,102 3,222 3,260
HIghHIghHIghHIgh efficiency Gefficiency Gefficiency Gefficiency G----seriesseriesseriesseries
MODEL 012G1/
015G1 018G1
021G1/
024G1
028G1/
032G1
036G1/
040G1
045G1/
050G1
056G1/
063G1
070G1/
080G1
090G1/
100G1
L 3,350/3,590 3,790 4,150/4,410 4,950 5,150 5,150 5,920 6,100/6,400 7,250
W 1,925 1,925 1,925 1,988 2,440 2,480 2,550 3,350 3,350
H 2,170 2,170 2,170 2,248 2,650 2,940 3,040 3,480 3,480
Foundation & Maintenance space dimensionsFoundation & Maintenance space dimensionsFoundation & Maintenance space dimensionsFoundation & Maintenance space dimensions GGGG----SeriesSeriesSeriesSeries
High efficiency High efficiency High efficiency High efficiency GGGG----series series series series (A~K)(A~K)(A~K)(A~K)
Model A B C D E F G H I J K
012E1 740 1,410 506 640 410 590 406 540 2,065 2,456 306
015E1 740 1,410 506 640 410 590 406 540 2,065 2,456 306
018E1 740 1960 506 640 410 1,140 406 540 2,065 3,060 306
021E1 740 2,100 760 640 300 1,500 660 540 2,065 3,400 50
024E1 740 2,100 760 640 300 1,500 660 540 2,065 3,400 50
028E1 1,060 2,834 506 960 357 2,120 406 860 2,128 4,200 50
032E1 1,060 2,834 506 960 357 2,120 406 860 2,128 4,200 50
High efficiency High efficiency High efficiency High efficiency GGGG----series series series series (A(A(A(A’~F~F~F~F’ ))))
Model A’ B’ C’ D’ E’ F’
012E1 2,400 1,410 2,200 1,412 2,065 2,456
015E1 2,400 1,410 2,200 1,412 2,065 2,456
018E1 3,000 1,960 2,800 1,412 2,065 3,060
021E1 3,600 2,100 3,910 1,412 2,065 3,400
024E1 3,600 2,100 3,910 1,412 2,065 3,400
028E1 4,720 2,834 4,460 1,412 2,128 4,200
032E1 4,720 2,834 4,460 1,412 2,128 4,200
High efficiency EHigh efficiency EHigh efficiency EHigh efficiency E----series series series series (A~K)(A~K)(A~K)(A~K)
Model A B C D E F G I J K
036E1 650 3,750 570 922 2,478 170 2,431 2,231 4,790 4,990
040E1 650 3,750 570 922 2,478 170 2,431 2,231 4,790 4,990
045E1 650 4,570 570 922 2,470 1,170 2,695 2,495 5,790 5,990
050E1 650 4,570 570 922 2,470 1,170 2,695 2,495 5,790 5,990
056E1 650 5,870 570 1,677 2,653 1,540 2,768 2,568 7,090 7,290
063E1 650 5,870 570 1,677 2,653 1,540 2,768 2,568 7,090 7,290
070E1 650 6,570 570 1,677 2,953 1,940 2,768 2,568 7,790 7,990
High efficiency EHigh efficiency EHigh efficiency EHigh efficiency E----series series series series (A(A(A(A’~I~I~I~I’ ))))
Model A’ B’ C’ D’ E’ F’ G’ H’ I’
036E1 4,500 3,570 4,500 750 670 1,741 25 2,231 4,790
040E1 4,500 3,570 4,500 750 670 1,741 25 2,231 4,790
045E1 5,500 4,570 5,500 750 670 1,741 25 2,495 5,790
050E1 5,500 4,570 5,500 750 670 1,741 25 2,495 5,790
056E1 6,900 5,870 6,900 750 670 1,741 25 2,568 7,090
063E1 6,900 5,870 6,900 750 670 1,741 25 2,568 7,090
070E1 7,600 6,570 7,600 750 670 1,741 25 2,568 7,790
Distributed byDistributed byDistributed byDistributed by
CHP Solution Inc. located at 333 Sylvan Avenue Suite 211, Englewood Cliffs, NJ 07401 USACHP Solution Inc. located at 333 Sylvan Avenue Suite 211, Englewood Cliffs, NJ 07401 USACHP Solution Inc. located at 333 Sylvan Avenue Suite 211, Englewood Cliffs, NJ 07401 USACHP Solution Inc. located at 333 Sylvan Avenue Suite 211, Englewood Cliffs, NJ 07401 USA
Email ; Email ; Email ; Email ; [email protected]@[email protected]@centioncorp.com