din rail mounted patch panel - the siemon...
TRANSCRIPT
DIN Rail Mounted Patch Panels provide an effective patching solution for industrial networks inside controlpanels and distribution cabinets where DIN mounted equipment is being used. The modular designaccommodates copper, fiber and multimedia modules to support most applications. The low-profile angleddesign minimizes cable bend radius in shallow enclosures where space is a premium and can be side stackableto grow with your networking changes.
• Cable strain relief to secureand protect connection points
CONNECTING THE WORLD TO A HIGHER STANDARD
W W W . S I E M O N . C O M / S I S
DIN Rail Mounted Patch Panel
• Angled design for low-profile cable routing
• 4-port opening compatiblewith Siemon Ethernet andmultimedia modules
STANDARDS COMPLIANCE• European Standard EN 50022
• IEC International Standard 60715
APPLICATIONS• Inside equipment cabinets with DIN rails
• Alongside Industrial Ethernet switches and PLC’s
• Mounting clipscompatible withstandard 35mmDIN rails
• Rugged 16 gauge steel constructionwith a durable black powder finish
SS_SIS_DIN_RevC_C 10/23/14 3:25 PM Page 1
© 2
014
Sie
mon
W W W . S I E M O N . C O M / S I S
Compatible Modules and Outlets
Siemon Interconnect SolutionsWatertown, CT USAPhone (1) 860 945-4213 E-Mail - Customer Service. - [email protected] - Technical Support. - [email protected]
DIN Rail Mounted Patch Panel
Note: When using shielded jacks bond other end of link to ground
Contact SIS technical support for additional sizes and configurations not shown
Z-MAX Outlets - Category 5e, 6 and 6A UTP and shielded
MAX Fiber Adapter Modules - LC, SC, ST
MAX Multi Media
Z(XX)-(X)(XX)(X)
Bezel ColorUTP or Shielded
Category
(Blank) = UnshieldedS = Shielded
Door Option(Blank) = No DoorD = Door (Hybrid only)
01= Black02= White03= Red04= Gray05= Yellow
*5e66A
06= Blue07= Green09= Orange20= Ivory80= Light Ivory
MX-F-S2-(XX)*.........
Flat module with 1 duplex STadapter (2 fibers)
MX-F-SC-(XX)*.........
Flat module with 1 duplex SCadapter (2 fibers)
MX-F-SA-(XX) ..........
Flat module with 1 simplex STadapter (1 fiber)
MX-F1-LC(X)-(XX) .......
Flat module with 1 duplex LCadapter (2 fibers)
For additional resource information:Visit our web site at www.siemon.com/SIS
Use (X) to specify LC adapter color: blank = beige, U = blue
Use (XX) to specify color: 01 = black, 02 = white, 04 = gray, 20 = ivory, 25 = bright white, 80 = light ivory
Modules include dust caps, one color-matching, one red, and one blue icon per port.
*These modules can be used only with DIN-PNL-04W-01
DIN-PNL-04-01 ..............................4-port panel, black powder coat
DIN-PNL-04W-01 ..........................Open port panel to accommodate duplexfiber modules, black powder coat
Ordering Information:
MX-F-BA-(XX) .........
Flat module with 1 BNC adapter, 75 ohms
MX-F-FA-(XX)...........
Flat module with 1 F-type adapter, 75 ohms, 2 GHz
Use (XX) to specify color: 01 = black, 02 = white, 04 = gray, 20 = ivory, 25 = bright white, 80 = light ivory
Modules include one color-matching, one red, and one blue icon.
Hybrid outlet includes one printed red, blue, white, black icon set.
*5e available shielded only
MX-F-RC-(XX)..........
Flat module with 1 RCA connectorwith solder tail
UTP Shielded
SIS-
DIN
_RA
IL_C
SS_SIS_DIN_RevC_C 10/23/14 3:25 PM Page 2