digital techniques
DESCRIPTION
THEATRE DESIGN POWER POINT. SARAH LEWISTRANSCRIPT
![Page 1: Digital Techniques](https://reader033.vdocuments.site/reader033/viewer/2022052623/559c0ceb1a28ab82258b45ab/html5/thumbnails/1.jpg)
Digital Techniques for Theatre Designers
Sarah Lewis
![Page 2: Digital Techniques](https://reader033.vdocuments.site/reader033/viewer/2022052623/559c0ceb1a28ab82258b45ab/html5/thumbnails/2.jpg)
Getting to grips with Photoshop This was the first time I had used Power
Point and so at first I had a difficult time with even the simplest of instructions. After a while however, I was able to get my head around the necessary procedures.
In this exercise, I learned how costume designs can be easily created in a way that specific fabrics and colours can be shown in a way perhaps a painting or a sketch could not.
Here, I simply cut and pasted ready saved fabrics, made them less opaque over the images and cut away the excess fabric.
![Page 3: Digital Techniques](https://reader033.vdocuments.site/reader033/viewer/2022052623/559c0ceb1a28ab82258b45ab/html5/thumbnails/3.jpg)
“Oh What a Lovely War” mood board… This is the mood board I
developed using techniques after thinking about the imagery appropriate for the play
I used various techniques including overlapping, making images less opaque, changing the colour scheme and smoothing edges off.
![Page 4: Digital Techniques](https://reader033.vdocuments.site/reader033/viewer/2022052623/559c0ceb1a28ab82258b45ab/html5/thumbnails/4.jpg)
3D Studio Max
This is my first attempt at a room environment, in the image you can see that I experimented with different lighting
I worked out how to position the spot light in an effective manner, how to change the colour of the light, and how to created shadow.
![Page 5: Digital Techniques](https://reader033.vdocuments.site/reader033/viewer/2022052623/559c0ceb1a28ab82258b45ab/html5/thumbnails/5.jpg)
3D Studio Max - Cloning This image
demonstrates how I used the clone tool to very quickly make many identical objects.
![Page 6: Digital Techniques](https://reader033.vdocuments.site/reader033/viewer/2022052623/559c0ceb1a28ab82258b45ab/html5/thumbnails/6.jpg)
3D Max – adding to the room I experimented a little further and
created furniture for my room – adding pictures on the walls by using the box tool to make very thin flat shapes and then inserting the image on top
I also created “an ornament” by draying a shape with the line tool and using lathe to make it 3D.
![Page 7: Digital Techniques](https://reader033.vdocuments.site/reader033/viewer/2022052623/559c0ceb1a28ab82258b45ab/html5/thumbnails/7.jpg)
Autocad – beginning stage This was my initial attempt
at creating a shape with Autocad.
I learned how to set the length of the line of a shape and how to ensure the line you drew would head in either a vertical or horizontal direction.
![Page 8: Digital Techniques](https://reader033.vdocuments.site/reader033/viewer/2022052623/559c0ceb1a28ab82258b45ab/html5/thumbnails/8.jpg)
Autocad - Progression At this point, I learned how to
make more complicated shapes. I used tools which enabled me
to cut across and round off corners to make variations of squares.
I also learned hot to add different layers so that I could use different colours to show the dimensions and angles of the shapes.
![Page 9: Digital Techniques](https://reader033.vdocuments.site/reader033/viewer/2022052623/559c0ceb1a28ab82258b45ab/html5/thumbnails/9.jpg)
Floppy Disk This is the beginning of the floppy
disk I created using autocad, and finding my own way of creating the shapes using the techniques we had been shown
I found I used the tool which allowed me to quickly draw shapes and then crop unnecessary lines.