Sparrow deals in variety of printing machines like large format printers, Eco solvent printers, etc.

The most advanced large format printing machine comes with an updated technology and precise performance. Its printing plate has built-in heating system. The machine has a structured design to ensure superior performance. Its dual inlet ink supply system guarantees sufficient ink supply in high speed printing. Machines auto temperature compensation function in Print Heads adjusts the print head s voltage automati-cally to facilitate smooth ink-jetting.

Digital print solution

Collared Konica HP 8

Collared Konica CK-8

Digital Printing Solutions

TM

Model Collared CK-8/HP-8

Print head KONICA 512/42 PL KONICA 512/42 PL

Number of Print head 4 8

Maximum Media Width 3300 mm 3300 mm

Maximum Print Width 3200 mm 3200 mm

360x360. 2 Pass 34sqm/hr 68sqm/hr

Print Speed 180x720, 2 Pass 40sqm/hr 80sqm/hr

180x1080, 3 Pass 30sqm/hr 60sqm/hr

Color CMYK CMYK

Media Paper, Advertising Banner, PVC, Mesh, Vinyl, Window Film & Canvas

Resolution Up to 1440 dpi

Media Feeding Auto Feeding, Auto Take up/Roll Less than 85 kg

Auto Cleaning System Positive Pressure Cleaning, Solvent Cleaning & Anti Clogging Flash Function (Vacuum Cleaner Optional)

Media Heating Pre Heater, Post Heater, Infrared Heater (0ptiona1)/Cooling Fan System

Image Format Bitmap, TIFF, JPEG, EPS, PDF

Color Management Superior ICC Profile

Work Flow RIP and print at the same time; print after RIP

Print Interface USB 2.0

Ink Type Eco - Solvent / Solvent Based Ink

Software Photo Print / Maintop

Print Head Height 5mm (Max)

Work Station Microsoft 2000 or Windows XP

Voltage 200V - (+10%) > 15A, 50Hz / 60Hz

Power Consumption 2.600W (22 0AC)

Working Environment Temperature : 20°C - 28°C, Humidity : 40% - 60%

Machine Dimension Length 4.5 M; Width : 0.72 M

Pre, Print & Post Heaters3 Gear Feeding System Auto Takeup System(Optional)

0.25mm Precision Print Table

Extra Longs Post Heater

Stronger Pinch Rollers

Head Height Adjustment

Heavy DutyMain Beam

Hiwin Low NoiseLinear Guide

ACS606 Servo Motor X & Y Megadyne Belt for X Axis High Quality LongType Ink Filters

JYY DC24V 300mlmInk Pumps

High Quality Sub TanksDouble Dryer Fans for HighSpeed Drying

Pre, Print & Post Heaters3 Gear Feeding System Auto Takeup System(Optional)

0.25mm Precision Print Table

Extra Longs Post Heater

Stronger Pinch Rollers

Head Height Adjustment

Heavy DutyMain Beam

Hiwin Low NoiseLinear Guide

ACS606 Servo Motor X & Y Megadyne Belt for X Axis High Quality LongType Ink Filters

JYY DC24V 300mlmInk Pumps

High Quality Sub TanksDouble Dryer Fans for HighSpeed Drying

TECHNICAL PARAMETERS:

FEATURES

1. Imported dual direction motor from Japen, high-resolution driver linear encoder, higher resolution, fewer erros in length, more stable running.

2. USB port more convient, high-est speed 480m/s, and it offers network interface for printing in different places.

3. Epson DX5 cartridge technology 8*180 nozzles,achieve 1440 DPI high-resolution output.

4. Eight large ink boxes provide ink durably, keeping wide format high-speed printing wonderfully.

5. VSD variable dot technology, smallest droplet is 3.5 pl, largest droplet is 27pl, achieve the perfect printing.

Printhead Epson DX5 micro piezo and stainless steel cartridge.

Resolution 1440dpi

Number of printhead 1

Number of nozzles 1440(8*180)

Colors CMYK color gamut 16.7million

Media width 1920mm

Printing width 1880mm

Printing passes 4pass/6pass/8pass 15sqm/h;10.5sqm/h;7.5sqm/hInk

Types Water-based; eco solvent-based; thermal transfer color management ICC based RIP

Software MAINTOP5.3

Computer system Windows XP Interface USB2.0

Heating system 3 sections heating part

Feeding method roll to roll

Leaf Humidity 40%-70%

Dimension L/W/H:2600*700*500mm

Weight 240Kg

TECHNICAL PARAMETERS:

Ecosolvant PrintersCD-E562Digital Printing Solutions

TM

Printhead Piezoelectric nozzle(2 print heads staggered)

Print Size 1.0mx1.3m

Resolution 28S0DPI 1440DPI 720DPI 360DPI

Ink Color Double 4 color. 8 color (white ink is optional)

Printing Speed 1H 2pass22m2 2H 2Pass42m2 (4C)1H 4pass16m2 2H 4pass 32m2 (4C)

Ink Type UVInk

Media Thickness <80mm (Optional for bigger size base on order)

Intelligent Device Carriage height controlling and adjustable. Protection System to protect print head

Curing Device UV-LED Lamp

RIP Software UltraPrint

Interface USB 2.0

Power AC 110-220V 50-60HZ450W

Operation Environment Temperature 18-30 C Humidity 35-65%

Packing Dimension 2.02x2.10x1.35m

Net Weight 450kg

Gross Weight 550kg

APPLICATION

Popular ApplicationBanner. Display, Exhibition Design. Flag. Indoor Sign. Industry Film Button, Packing, Poster, etc.

Typical MaterialAcrylic, Aluminum, Aluminum-plastic composite material, Cardboard, Corrugated Plastic. Glass. Plywood. PVC. etc

AdVANTAGE OF UV dIGITAL PRINTING

1. It eff ectively alternative to the screen process that avoid the fi lm proofi ng drying process and silkscreen tedious steps.

2. It is All-digital or semi-digital process that can reduce the print time and shorter delivery cycles.

3. From design perspective, it can increase the use of the image, gradient and other creative elements.

4. Digital Printing Job can- Simplify the production process and shorten production time- Reduce the cost of production and process consumable loss- Reduce chemical emissions- Proofi ng from one as Minimum Without material restrictions

MAIN TECHNICAL SPECIFICATION

UV Digital PrinterUV 1015

Gla

ss P

rintin

gTi

les P

rintin

gFo

am S

heet

Digital Printing Solutions

TM

Model MN1390/MN960/MN640

Working Area MN390 - 1300 x 900MM (4.33 x 3ft) MN960 - 900 x 600MM (3 x 2ft) MN640 - 600 x 400MM (2 x 1.33ft)

Laser power 125w/100w/80w/60w

Control system Ruida DSP system

Cutting Speed 0-18000mm/min

Engraving speed 0-64000mm/min

Natural life of laser 10000H

Minimum shaping character 0.5mm

Cutting table aluminium slot and honey comb

Cooling Industrial Chiller

Position system Red dot

Interface LCD screen with USB interface

Max Cutting thickness <25mm (Acrylic)

Power Conception <2000w

Software supported Coreldraw,AutoCAD,Photoshop,llustrator etc

Graphic Format SupportedBMP,HPGL (PLT), DXF, G-CODE, DST,AutoCAD, CorelDraw, CAD CAM, AI, Photoshop

Assistant equipment Exhaust-fan, Air pump, Industry chiller

Optional confi gurations Up and down, Auto focus, Rotary attachment, Double head

Operating Temperature 00C-450C

Laser Cutting & Engraving Machine

APPLICABLE MATERIALS:

Acrylic, Plastic, Foam sheet, Wood, Bamboo, Ceramic, Crystal, Fiber, Paper and other non metal surfaces

TECHNICAL PARAMETERS

CNC Engraver

TECHNICAL PARAMETERS

Model MN-1325 MN-2040

Table Size 1320x2625mm 2020*4150MM

Colour Red, Grey, Blue

Spindle Inverter Water Cooling 3kw/air cooling 3kw

Max Material Thickness 160mm 160mm

Working Size 1300×2500×160mm 2020×4150×160mm

Transmission Linear Square Guide** Ball Screw for Z axis,Gear Rack for X,Y axis

Cut Speed 8000mm/Min

Rapid Speed 20000mm/Min

File Format G Code or HPGL

Weight 700kg 1000kg

Packing Size 1850x3250x1650mm 4700x2200x1600mm

** A beautiful shaped and accurate machine with bearing running along ball screw, it offers fine machining with quick enough speed for sign making,plastics processing,prototyping,model making,woodworking,musical instruments producing,etc.

1

STANdARd FEATURES1. Base Frame: it is an iron casting base being precisely processed by gantry milling machine and stress relieved by vibration device so

that the foundation remains true and steady over the operational life of the machine.2. Gantry made of industrial tube with outstanding rigidity,which ensures powerful and fast machining.3. Spindle: Quality water cooling spindle with better performance of cost-effectiveness,various spindle options available for different

requirements.4. Controller : A compact and durable DSP with 128M internal memory,it supports U flash memory as well as online file communication.

It is available with standard G code or HPGL,and has practical functions like faster calculation, stronger processing ability,breakpoint memory and power failure protection function,etc.

5. Electric Cabinet:All the electrical components are housed and wired in a electrical enclosure. This allows for easy access and service when needed. Every wire is tagged so that when service is required, the customer can easily navigate the cabinet.

6. Stepper Motor: Industrial sub-divided stepper motor centered drive has outstanding wearability and it offers long-term mainte-nance-free solution,its’ Y axis is driven by double stepper motor associating with gear rack

7. Gear Rack : We use precision gear racks,carefully installed and regulated by experienced worker with special purpose instrument ,this assures smooth motion and long term reliability.

8. Linear Square Guide: 20MM linear square guide with double bearings,an ultra-heavy type that achieves a deep grooved raceway with its diameter more approximate to the ball diameter and has high rigidity, vibration and shock resistance, and damping charac-teristics, which are required for machine tools.

9. Vacuum table optional: The vacuum table multi-zoned which allows the operator to easily switch from full sheet processing to small-er part,gaskets can also be routed to accommodate various material sizes and styles.Fixtures can also be used if needed as we put aluminum alloys beside the vacuum table.

2 3

4 56

7 8

9

TOP & AMAZING FUNCTION dETAIL:

• AAS (Accurate Allignment System): Operator may simply put the sensor close to the fi rst mark and it will read all the marks all by itself, which is much faster and more convenient then the other systems which seem similar to our system

• Bluetooth technology is applied to transfer working fi les and operate, cable transfer is no longer needed

• Available with USB2.0 port and U Flash disk, completely offl ine cutting

• Accurate subdivided processor with 32 bit CPU, 2M memory • The Japan imported new micro-control technology, Intel DSP controller, Japan high-precision steel axes &

64 sub-divide motor, just with 48dp low working-noise.• Up to 1000mm (39”) per second cutting speed, especially for Y axis 2020mm (46”) per second

media-sending max speed.• Up to 0.0191mm/step (0.00073”) mechanical resolution ( DSP), 0.127MM (0.00049”) repeating resolution

ensure high precision output.• Up to 800 gram cutting force for making sure any media cut-

ting.• Up to max 0.8mm (0.0315”) thickness media cutting.• Guaranteed 10 meter tracking with high precision. • Newest data transmission interface: USB or U Flash• Support Adobe Illustrator, Core DRAW and Flexi Sign output

directly, easily and stably.• Infrared Position, Contour Cutting Function, provide auto de-

tect precision positioning contour cutting. • Can easily cut Advertising Refl ective Film, vinyl hard paper, etc.

Cutting PlotterSIGN KEY 220H

Item SK720 SK850 SK1100 SK1350

Max. paper feeding width 720mm 850mm 1100mm 1350mm

Max. cutting width 630mm 750mm 1000mm 1250mm

Max cutting Speed Whole cutting: 1000mm/s, Y axis max cutting: 2020mm/s

Knife pressure 10~800g

Memory 512k, Possible to be enlarge to 8M

Mechanical resolution 0.0191mm/step (0.00073” )

Repeating precision 0.127mm (0.00049”)

Interface RS-232 USB, or U Flash Memory

Language format DM/PL/HPGL

Power supply AC160V~240V 50~60HZ

Driving system DSP 64 Sub-divide High precision motor

Working Environment Temperature

0~35�

Working Environment Humidity 5%~95% no coagulate water

LED The LED display with backside Chinese & English

Infrared Positioning Contour Cutting Function ( Optional function)

Packing Size 1120*386*330mm 1250*386*330mm 1550*386*330mm 1750*386*330mm

TECHNICAL PARAMETERS:

Cutting Plotter

Model : TH740

Basic Parameter

Material Sheet metal +aluminium alloy Media way Floor stand(Optional)

Max. Paper feed width 740MM Max. Cutting Size 635MM

Paper feeding system Drum steel thorn paper Paper feeding way Dual paper stick fl at manually

Axis steel distribution Universal size distribution Number of Axis steel 5 pcs

Platen device Double springs huge pressure roller holder

Number of Roller holder 2 units

Driver Micro-step driver Origin setting Set each original points man-ually

Cutting Speed 50-500MM/S Cutting length Unlimited

Cutting Precision 0.005MM Repeatable precision <0.005MM

Cutting force 5-500g Cutting thickness 0.05MM-1MM

Idling Speed 0-3 gear adjustable Noise 60-65dB

Control System

Main board 32-bit ARM7 CPU,4MB Control Panel 11 membrane buttons + LCD touch screen

Transmission mode Serial Port+USB+SD card Repeat Function Offl ine a key re-engraved to start

Repeat Function 1 - 500pcs Memory Function Power off doesn't remove source fi les

Memory Capacity 4M Transmission speed 38.4K/56K

Origin Memory Cutting Pause Paper Origin Memory

Display Chinese and English Display Switch

Plotter Instruction Compatible DM/PL,HP/GL Output software Artcut, Signcut fl exi CorelDRAW, CAD, Ai, etc

Cutting Consumable

Blade Diameter 1.49mm the tungsten cutter

Drawing Refi lls Atomic Drawing Refi lls

Voltage Consumption

Power supply AC90~240V/50HZ-60HZ Working Environment +5-+35��Humidity: 30%-70%

Standby power con-sumption

<25W Working Consumption <100W

Volume/Weight

Package Size 1040×330×395mm Gross weight 17KG(20KG)

Applicable Industries

Advertisement; Glass sandblasting; Marble blasting; Die cutting samples; Article gift ware making; Car/Wall sticker; Paper Pattern; Printing; Logo and Signs.

Standard confi guration:

Machine 1 set, 1 set fl oor stand, 1 serial port, 1 pcs USB cable, 1pcs CD, 1pcs blade holder, 3pcs blades, 1pcs drawing pen.Note: The above technical parameters are subject to change without any other notice.

TH740

• Touch Screen

• Contour Cut

• U Disk/USB Output

• High precission Steel Axes

• Huge Pressure

• Repeat Function

• Sharp Edge

• Mac OS X

• Support Corel Draw & AutoCAD

• Wireless Control

• Noiceless ARM SystemFE

AT

UR

ES

Eyeleter HP-8

Eyeleter SP-10

Brand Name : ZonglanModel Number : HP-8Item Name : acyclic eyelet punch machineColour : blueMaterial : HT-200Eyelet Type : Single FittingEyelets : 10mmFeature 1 : Automatic feeding eyeletFeature 2 : Single eyeletAdvantage 1 : More EfficientAdvantage 2 : Saving Cost for eyelets weight : 20kg

Brand Name : ZLModel Number : SP-10Item name : Eyelet Puncher, Eyelet Plier, Eyelet machinehand shank : red suitableeyelets : 10mm inner size weight : 450g

STANdARd FEATURES:

1. Reliable, Sturdy and Powerful Heat Gun with Ceramic Heating Coil(2100W);

2. Small Size, Light Weight, Easy Handling; 3. Temperature and speed setup are programmed on

integrated circuit with digital display, which is more accurate and easier handling;

4. Motor speed is adjustable for application on different material with different thickness;

5. Guiding wheel to keep the welder going straight dur-ing the work.

6. Consistent Quality and Superior Durability with one year warranty;

Heating Power 2100WVoltage 230VWelding Seam Width 30mmWelding Speed 0.7-10 meter/minWorking Temperature 50-600℃Net Weight 11kgGross Weight 13.9kg

Flex Joining MachineModel 6002A

Semi Automatic

TECHNICAL PARAMETERS:

Service AspectSparrow believes that serving the customers with a dedicated service procedure is the backbone for the sustainable growth. We have a systematic approach to undertake every job to the cent percent satisfaction of the customer. Our dedicated team of professionals assures you a world-class service. We process and execute our jobs diligently with utmost care. With Sparrow quality is an inherent value and which guarantees an errorless service part to our customers.

Printing Media• The exclusive stock consists of Vinyl cloth, Canvass, Paper, PVC,

Mesh fabric, Adhesive vinyl etc. • The products are sourced from leading global brands, and naturally

of superior quality to give you the real output while printing.• Feature includes Good Fluency, Low Smell, Wide Colour Gamut,

Vivid Colour, Durability

FEATURES

• Smooth printing without head blockage

• Poison less and light smelling

• 18 month outdoor life• Deep Colors• Environment friendly

Sparrow imports and supplies super quality Printing inks from worlds leading brands. The Japan pigment based inks of superior quality can ensure you expres-sive results in bright colors. All of them are of mild odour, free of poison and envi-ronment friendly. The inks have excellent adhesive quality and come in fi ne fi ltra-tion fl uency, which enhances its nozzle life. The inks will never block the print head as the ink does not condence

Inks

SOLVENT

Xaar 128 / 200Xaar 128 / 720

Xaar 382 / 1440SEIKO 35 Pl

Spectra 42 PL PQ 512Konica 42 PL/35 PL/14 PL

ECO SOLVENTEpson DX4 Epson DX5Epson DX7

Spare & Service