digital finishing groupifinishingsystem.com/wp-content/uploads/2019/03/nl-f... · 2019. 3. 21. ·...
TRANSCRIPT
Digital Finishing Group14050 Simone Dr., Shelby Twp., Michigan 48315 , U.S.A. Fax: 775-587-5352 Email: [email protected] Website: www.ifinishingsystem.com
Digital Finishing GroupThe True Leader in Advanced Post-Printing Finishing
NL F – Next Level Digital Finishing Line, the World’s highest productive and most versatile, either offline or inline to Digital Presses
Proudly designed and
manufactured in the U.S.A.
The NL F slits, cuts, positive and negative creases, two dimensionally perforates, scores and folds in one
sheet pass. It can produce the full range of flyers, brochures, business cards, greeting cards, post cards, gift
cards, sleeve, wedding cards, photos, and more, both with and without folding and perforating.
NL F 150
• Can also be used as inline
solution to most Digital
Presses up to 150 PPM by
using a IDF kit
In one sheet pass
The Most Versatile System
• Slit,
• Cut,
• Positive crease,
• Negative crease,
• Sheet move direction jump
perforation,
• Sheet cross direction perforation,
• Score,
• Knife fold
• PartialDiffPosition™
• DigiFlyWheel™
• AccuSlitterDriving™
• The most accurate
machine (At the family
of middle to high end
machines)
The World’s First and Only
Highest Productive• The world’s highest
productive Machine
• As twice fast as the
competition's fastest
machine.
Exclusive Technologies used
The most Versatile
• One NL F can replace five stand alone machines. (slitter, cutter, creaser, perforator and folder)• Metal block design for long lasting and easy service• Inline finishing eliminates post printing finishing labors• Multiple patents pending.
Digital Finishing Group14050 Simone Dr., Shelby Twp., Michigan 48315 , U.S.A. Fax: 775-587-5352 Email: [email protected] Website: www.ifinishingsystem.com
Digital Finishing GroupThe True Leader in Advanced Post-Printing Finishing
Proudly designed and
manufactured in the U.S.A.NL F – To fold in line by adding a knife folder
Add an
optional F200
knife folder to
Fold inline
NLF 200NL F +=
Cost less than
NL FMake up to
18,000
folders per
hour (up to
350 gsm)
2 times faster than
any digital knife
folder
Positive crease
Negative creaseCut
Cross perf
Jump perf
Cut
Slit
Slit
Digital Finishing Group14050 Simone Dr., Shelby Twp., Michigan 48315 , U.S.A. Fax: 775-587-5352 Email: [email protected] Website: www.ifinishingsystem.com
Digital Finishing GroupThe True Leader in Advanced Post-Printing Finishing
Connect to Your
Digital Press via
IDF kit from our
company
NL F– Offline or Inline to your digital presses Proudly designed and manufactured
in the U.S.A.
NL 100
• No finishing labor
anymore
• Finishing and
printing completed
at same time
Offline Operation
The World’s only Inline solutions for extensive digital Finishing
Load sheets to
this top pile
vacuum feeder
Feeder Capacity:
• Standard: 8 “
• Optional 16”
or 22”
NL 100
Inline Operation
Connect to Your
Digital Press via
IDF kit from our
company
Load sheets to
this top pile
vacuum feeder
• No printed
sheets handling
between
printing and
finishing
Digital Finishing Group14050 Simone Dr., Shelby Twp., Michigan 48315 , U.S.A. Fax: 775-587-5352 Email: [email protected] Website: www.ifinishingsystem.com
Digital Finishing GroupThe True Leader in Advanced Post-Printing Finishing
NL F – The most versatile Proudly designed and
manufactured in the U.S.A.
In one sheet pass, The standard NL F can make
• 32 cuts
• 24 positive creases
• 24 negative creases
• 24 jump perforations (sheet move
direction, partial or full length)
• 24 cross perorations (partial or full
length)
• 10 slits
• Center, single, Z, letter, Accordion,
double parallel, gate fold and more
Typical example: from
one sheet pass, you will get
4-up full bleed folded cards
(from a 12” x 18” stock) with
“L” type tear-able perforations
Cross and
Jump Perf
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
Manual
tear off
• 6 slits
• 2 scores
• and more
With optional IDF (inline document finishing)
kit, The NL F can direct connect to the most
digital press up to 150 PPM
Positive Crease
Negative Crease
In one sheet pass, with options, NL F can add:
Good for perfect book covers and some high end Z folders
Digital Finishing Group14050 Simone Dr., Shelby Twp., Michigan 48315 , U.S.A. Fax: 775-587-5352 Email: [email protected] Website: www.ifinishingsystem.com
Digital Finishing GroupThe True Leader in Advanced Post-Printing Finishing
NL F – Speed Rating (2 methods) Proudly designed and
manufactured in the U.S.A.
NL 100’s SCC rate: Up to 100
sheets per minute for 8.5 x 11”
sheets (SEF)
• 2 slits
• 2 cuts
• 2 crease
Cross Perforation
Jump Perforation
IFS’s SCCP rate: Up to 65
sheets per minute for 8.5 x 11”
sheets (SEF)
• 2 slits
• 2 cuts
• 1 crease
• 1 jump perforation
• 1 cross perforation
In order to direct connect finishing machine to todays’ digital press for inline finishing, SCC rate of 75 Sheets per minute is
a minimum. It needs some very advanced sheet position technology.
Check here: Duplo’s DC 746 rated 50 sheets
per minute
Our lowest NL 100 rated as twice fast as the competition's fastest machine
Can DC 746 do 32
with perforations?
Digital Finishing Group14050 Simone Dr., Shelby Twp., Michigan 48315 , U.S.A. Fax: 775-587-5352 Email: [email protected] Website: www.ifinishingsystem.com
Digital Finishing GroupThe True Leader in Advanced Post-Printing Finishing
Some examples of cards and documents
Slit, Cut, Crease, Cross Perf, Jump Perf and Multi-row Fold in One sheet Pass
“L” or “T” Perforated
Standard jump perf head (lengthwise direction): 2Optional 3, or 4 or 5 or 6Each jump perf head can do up to 12 perf segments in one sheet passY (crosswise direction): up to 24 cross perf in one sheet pass
More Perf Examples
Digital Finishing Group14050 Simone Dr., Shelby Twp., Michigan 48315 , U.S.A. Fax: 775-587-5352 Email: [email protected] Website: www.ifinishingsystem.com
Digital Finishing GroupThe True Leader in Advanced Post-Printing Finishing
Some problems NL F solved (They are very difficult for high speed digital finishing)
Not Good
Good Image Squareness
Good
It happened very often in high speed machines
Long Conveyor
and Vacuum Table
sheet side
registration system
• This system put
image squareness
in specification.
• It compensates
the sheet width
error from sheet
manufacturer.
• It compensates
sheet shrink or
expansion from
printing process
Gut Width “R”
Gut Width “L” The difference between gutter width “L”
and “R” is less than 0.005” for entire length sheet (up to 40’)
Sheets move direction
NL F uses high precision gutter slit technology (solid metal block, no sheet metal)
And Vacuum Table used
Long conveyor used
NL F guarantees – There is no image shift (green on blue) for small or large card
Sheets move direction
Good
Not Good
CutterModule
CreaseMechanism
Interchangeable Slit Modules
The NL F cuts first then Slit. So it always moves sheets as one piece. Most machines in the market slit first then cut. So when they feed small cards, (for instance, business cards), at the last several rows, they move 3 or more separated strips by rollers. It is difficult at high speed without image shift.
Digital Finishing Group14050 Simone Dr., Shelby Twp., Michigan 48315 , U.S.A. Fax: 775-587-5352 Email: [email protected] Website: www.ifinishingsystem.com
Digital Finishing GroupThe True Leader in Advanced Post-Printing Finishing
• It takes less than a minute to change
• The perf force, speed, travel are all controlled by software.
New Picture will come soon
• It takes less than a minute to change
• You can change it to some other modules
Interchangeable Jump Perforation Module.
Interchangeable Margin Slit Module.
Interchangeable Center Slit Modules.
• It takes less than a minute to change
• Slit positions are adjusted by software
• You can also change it to other modules
• It takes less than a minute to change
• Slit positions are adjusted by software for
• You can also change them to other module
Some Interchangeable Modules
Interchangeable Cross Perforation Module.
There are 10 pairs of slit blades for standard NL F / NL machinesYou can opt up to 16 pairs of slit blades. They are all adjusted by software
There are 2 jump perforation blades for standard NL F / NL machinesYou can opt up to 6 perforation blades.
Digital Finishing Group14050 Simone Dr., Shelby Twp., Michigan 48315 , U.S.A. Fax: 775-587-5352 Email: [email protected] Website: www.ifinishingsystem.com
Digital Finishing GroupThe True Leader in Advanced Post-Printing Finishing
SCC up to 80 /100 / 125 page per minute (2 slits, 2 cuts and 1 crease)
Sheet size: 8” x 8” to 13” x 19”(40” with optional long sheet kit for offline)8” x 8” to 13” x 19” for inline to digital presses
Minimum finished size: 1” x 2” Sheet weight: 105 gsm to 450 gsm (perforation up to 300 gsm)Vacuum feeder loading capacity: 8” is standard (16” and 22” are optional)Receiving capacity: 6.5” for Tray. 28” conveyor receiver is an optional
Standard slitters: 10 pairs adjusted by softwareOptional slitters up to 14 pairs all adjusted by softwareMaximum cuts for one sheet pass: 32Maximum Positive creases for one sheet pass: 24Optional Negative creases for one sheet pass: 24 is MaximumMaximum cross perf for one sheet pass:24Maximum standard jump perf for one sheet pass: 12 segmentsMaximum jump perf with options: 72 segmentsStandard jump perf head: 2. Optional jump perf head: 3,4,5 or 6 A set of cross perforation tool (from 1” to 13’) is standardIDF kit (inline document Finishing Kit): optional for inline finishingF200 inline knife folder is optional for NL linePower: Single phase. 115 V, 60 Hz, 8A or 230V, 50 Hz, 5AMachine size: 108” (L) x 30” (D) x 48” (H) Shipping Weight: 1,200 /1,300 /1,400 lbs
NL F 80 / 100 /125 Specifications*:
* The specification are Material dependent
SCCP up to 65 / 75 / 85 sheets per minute (2 slits, 2 cuts ,1 crease, 1 sheet move direction perf and 1 sheet cross direction perf)Fold speed: up to 14,000 / 16,000 /18,000 folders per hour
Slitter Module - Software controlled slit positions and driving speed
NL F can make this full bleed Z fold in one sheet pass. It is almost impossible for other company’s machines to do it
(Front and tail edge cuts, left and right side slits, one positive crease, one negative crease, two jump perforations and one cross perforation in one sheet pass
Due to continuous product improvement, specifications are subject to change without notice. The Data will change for different type of materials.. Duplo’s data is for reference only. Please contact www.duplousa.com for its latest machine speed and price info.
Waste material is directed to the outside waste bin (no waste fill up inside machine
Positive crease
Negative creaseCut
Cross perf
Jump perf
Cut
Slit
Slit
Digital Finishing Group14050 Simone Dr., Shelby Twp., Michigan 48315 , U.S.A. Fax: 775-587-5352 Email: [email protected] Website: www.ifinishingsystem.com
Digital Finishing GroupThe True Leader in Advanced Post-Printing Finishing
C Series – Creasers
World’s fastest – up to 9,000 sheets
per hour
Due to continuous product improvement, specifications are subject to change without notice. The Data will change for different type of materials.. Duplo’s data is for reference only. Please contact www.duplousa.com for its latest machine speed and price info.
ACF Series – Creaser, perforation and
Knife Folders. World’s fastest at its class
– up to 9,000 sheets per hour
C Series – Creasers
World’s fastest – up to 9,000 sheets
per hour
IDF Series – Directly connect to a
printing press. Inline card slit, cut,
crease, and fold all in one. World’s first
and only
You might also interest:
SCCF Series – Slit, cut, crease, fold and moreSCC Series – Slit, cut, crease and more
DFF series – Slit, Cut, Crease, two dimensional perforation and Knife Fold and more. World’s fastest and most versatile (except for some of our own models)
Low cost inline to digital press
DF series – Slit, Cut, Crease, two dimensional perforation and more. World’s fastest and most versatile (except for some of our own models)