DIGIPASS DP 260

USER MANUAL

Contents1. What is DIGIPASS?2. How to activate the DIGIPASS and how to enter

3. How to use DIGIPASS?

EN DIGIPASS DP 260

1. What is DIGIPASS?DIGIPASS DP 260 is password-protected customer personal

-ments for remote banking services. DIGIPASS represents an elec-tronic device, which generates unique test-key (substitution to

Access to all functional capabilities of DIGIPASS DP 260 is pro-vided after entering of 5 - digit PIN-code. At handing over of DI-GIPASS device, the Bank provides the customer with initial PIN – code, which must be changed to customer personal PIN – code by the customer him/herself.

are unpredictable, non- reproducible, time - dependant and unique device - based codes. The value of the code, after its con-trol at the Bank is not subject to repeated use.

Symbols used in the device

_ _ _ _ _ NEW PIN enter new PIN-code

_ _ _ _ _ PIN CONF

_ _ _ _ _ NEW PIN CONF

_ _ _ _ _ PIN enter PIN-code

APPLI _ choose the function

FAIL failure

LOCK PIN DIGIPASS has been blocked

EN DIGIPASS DP 260

2. How to activate DIGIPASS device and how to enter and to change the PIN-code?At handing over of DIGIPASS device to the customer, the Bank has assigned to it an initial PIN-code, which should be changed

1. Switch-on the device by pressing the button .

2. _ _ _ _ _ PIN will appear on the screen. Enter the initial PIN-code, provided by the Bank.

3. _ _ _ _ _ NEW PIN will appear on the screen. Enter the new PIN-code.

4. _ _ _ _ _ PIN CONF will appear on the screen.

choice.

5. _ _ _ _ _ NEW PIN CONF and APPLI_ will appear on the

thus enabling you to choose any of the DIGIPASS functions.

If the new PIN-code will be entered incorrectly, FAIL will appear

the PIN-code.

3. How to use DIGIPASS?Activation of the device

1. Press .

2. Enter your PIN-code after _ _ _ _ _ PIN will appear on the screen. Wrongly entered input of data may be corrected by deleting the last digit by pressing , as well as switching

3. APPLI_ on the screen. Then you may choose any of the necessary functions.

By pressing “1”, the 8 – digit Access code will be generated, to al-low you to open access to the internet-bank Multinet. This func-

-cation with the Bank’s employee. You simply name the 8-digit

Access code is valid for 30 minutes from the moment of its gen-eration.

By pressing “2”, the Authentication code will be provided to con-

By pressing “2”, you will receive prompt “1 _ _ _ _ _ _” on the

by the system on signing of the order. After that you will receive prompt “2 _ _ _ _ _ _” on the screen. Enter the second generated 6-digit code. Then DIGIPASS will provide you with 8-digits code for entering into the system.

EN DIGIPASS DP 260

AUD 360 000

JPY 392 000

BYR 112 000

LTL 440 000

CAD 124 000 CHF 756 000

NOK

578 000

CZK 203 000

PLN 985 000

DKK 280 000

RUB 643 000

EEK 233 000

SEK

752 000 UAH

980 000

GBP

826 000

USD 840 000 000 000

(Australian dollar)

(Byelorussian ruble)

(Canadian dollar)

(Swiss franc)

(Czech koruna)

(Danish krone)

(Estonian kroon)

(English pound)

(Japanese yen)

(Lithuanian litas)

(Norwegian krona)

(Polish zloty)

(Russian ruble)

(Swedish krona)

(Ukrainian grivna)

(USA dollar)

Other currencies

By pressing “3”, you will be able to receive Authentication code, necessary for the submission of the documents by fax.

Generation of the signature for Fax documents

1. Switch on the device.

2. Enter the PIN-code.

3. Press the button “3”. “1_ _ _ _ _ _” will appear on the screen.

roundups). If amount value is less than 6 digits, necessary to input rest values as zero (0). Example: payment amount is 666.12. Necessary to input in Digipass 666000 value.

5. Press and hold until “2_ _ _ _ _ _” will appear on the screen.

6. Enter the currency code (see the table).

7. Enter and hold until “3_ _ _ _ _ _” will appear on the screen.

note). The device will generate 8-digit Authentication code.

9. Make sure, that you have determined time, when the Authenti-

The time has to be Riga local time.

EN DIGIPASS DP 260

Note

• If the account number does not contain more than 6 digits and no other symbols, the whole account number should be entered. Press and hold until the 8-digit Authentication code will appear on the screen.

• If the account number contains more than 6 digits, only the last 6 of them should be entered. Example, 123456789112233445 should be changed to 233445.

• digit symbols, only 6 digits should be entered (last 6, if there are more than 6 digits). Example, 12A3B4567890C123 should be changed to 890123.

Change of the PIN-code

1. When the device is switched-on and APPLI_ is on the screen, press and hold as long as _ _ _ _ _ NEW PIN will appear on the screen.

2. Enter the new PIN-code. After _ _ _ _ _ PIN will appear on the screen, re-enter the same PIN-code. _ _ _ _ _ NEW PIN CONFof the PIN-code.

The device may be switched of by pressing . The device will switch of automatically if no actions will be taken during 25-30

Provide safety of your DIGIPASS device and do not allow anybody to have access to your PIN-code.

It is forbidden to disassemble DIGIPASS device on physical

In cases of week battery, you will not be able to manage your account, if no alternative means of authentication (for instance code card) are at your disposal.

If you have lost your DIGIPASS or it has been stolen, inform the Bank immediately. In order to receive new DIPIASS device, you have to visit the Bank or its representative

seconds.