www.lasertools.co.uk

7525

5 018341 075255

Diesel Injector RemoverVAG TDi

www.lasertools.co.uk

Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be held responsible for any damage to personnel, property or equipment when using the tools. Incorrect use will also invalidate the warranty.

If applicable, the applications database and any instructional information provided has been designed to offer general guidance for a particular tool’s use and while all attention is given to the accuracy of the data no project should be attempted without referring first to the manufacturer’s technical documentation (workshop or instruction manual) or the use of a recognised authority such as Autodata.

It is our policy to continually improve our products and thus we reserve the right to alter specifications and components without prior notice. It is the responsibility of the user to ensure the suitability of the tools and information prior to their use.

7525_Instructions_V2

Instructions

If this product fails through faulty materials or workmanship, contact our service department direct on: +44 (0) 1926 818186. Normal wear and tear are excluded as are consumable items and abuse.

Guarantee

www.lasertools.co.ukDistributed by The Tool Connection Ltd

Kineton Road, Southam, Warwickshire CV47 0DRT +44 (0) 1926 815000 F +44 (0) 1926 815888info@toolconnection.co.uk www.toolconnection.co.uk

75257525

Diesel Injector Diesel Injector Diesel Injector Diesel Injector

Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be held responsible for any damage to personnel, Connection cannot be held responsible for any damage to personnel, property or equipment when using the tools. Incorrect use will also property or equipment when using the tools. Incorrect use will also

If applicable, the applications database and any instructional If applicable, the applications database and any instructional information provided has been designed to offer general guidance for

Diesel Injector Diesel Injector Diesel Injector Diesel Injector RemoverDiesel Injector RemoverRemover

Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool purpose for which they are intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be held responsible for any damage to personnel, property or equipment when using the tools. Incorrect use will also

If applicable, the applications database and any instructional information provided has been designed to offer general guidance for If applicable, the applications database and any instructional information provided has been designed to offer general guidance for a particular tool’s use and while all attention is given to the accuracy of the data no project should be attempted without referring first to

information provided has been designed to offer general guidance for a particular tool’s use and while all attention is given to the accuracy of the data no project should be attempted without referring first to the manufacturer’s technical documentation (workshop or instruction of the data no project should be attempted without referring first to the manufacturer’s technical documentation (workshop or instruction manual) or the use of a recognised authority such as Autodata.

It is our policy to continually improve our products and thus we reserve the right to alter specifications and components without prior notice. It is the responsibility of the user to ensure the suitability of the tools and

Diesel Injector RemoverDiesel Injector RemoverRemoverRemoverRemoverVAG TDiVAG TDiVAG TDi

Instructions

Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be held responsible for any damage to personnel, Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be held responsible for any damage to personnel, property or equipment when using the tools. Incorrect use will also invalidate the warranty.property or equipment when using the tools. Incorrect use will also

If applicable, the applications database and any instructional information provided has been designed to offer general guidance for a particular tool’s use and while all attention is given to the accuracy of the data no project should be attempted without referring first to a particular tool’s use and while all attention is given to the accuracy of the data no project should be attempted without referring first to the manufacturer’s technical documentation (workshop or instruction manual) or the use of a recognised authority such as Autodata.the manufacturer’s technical documentation (workshop or instruction manual) or the use of a recognised authority such as Autodata.

It is our policy to continually improve our products and thus we reserve

manual) or the use of a recognised authority such as Autodata.

It is our policy to continually improve our products and thus we reserve the right to alter specifications and components without prior notice. It is the responsibility of the user to ensure the suitability of the tools and

It is our policy to continually improve our products and thus we reserve the right to alter specifications and components without prior notice. It is the responsibility of the user to ensure the suitability of the tools and

VAG TDiVAG TDiVAG TDi

InstructionsInstructions

Our products are designed to be used correctly and with care for the purpose for which they are intended. No liability is accepted by the Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be held responsible for any damage to personnel, Tool Connection for incorrect use of any of our products, and the Tool Connection cannot be held responsible for any damage to personnel, property or equipment when using the tools. Incorrect use will also invalidate the warranty.property or equipment when using the tools. Incorrect use will also invalidate the warranty.

If applicable, the applications database and any instructional If applicable, the applications database and any instructional information provided has been designed to offer general guidance for a particular tool’s use and while all attention is given to the accuracy information provided has been designed to offer general guidance for a particular tool’s use and while all attention is given to the accuracy of the data no project should be attempted without referring first to the manufacturer’s technical documentation (workshop or instruction of the data no project should be attempted without referring first to the manufacturer’s technical documentation (workshop or instruction manual) or the use of a recognised authority such as Autodata.

It is our policy to continually improve our products and thus we reserve It is our policy to continually improve our products and thus we reserve the right to alter specifications and components without prior notice. It is the responsibility of the user to ensure the suitability of the tools and is the responsibility of the user to ensure the suitability of the tools and

a particular tool’s use and while all attention is given to the accuracy of the data no project should be attempted without referring first to the manufacturer’s technical documentation (workshop or instruction manual) or the use of a recognised authority such as Autodata.the manufacturer’s technical documentation (workshop or instruction manual) or the use of a recognised authority such as Autodata.

It is our policy to continually improve our products and thus we reserve It is our policy to continually improve our products and thus we reserve the right to alter specifications and components without prior notice. It the right to alter specifications and components without prior notice. It is the responsibility of the user to ensure the suitability of the tools and information prior to their use.information prior to their use.

www.lasertools.co.ukwww.lasertools.co.ukwww.lasertools.co.ukwww.lasertools.co.ukwww.lasertools.co.uk

7525_Instructions_V2

www.lasertools.co.ukwww.lasertools.co.ukwww.lasertools.co.ukwww.lasertools.co.uk

5 018341 0752555 018341 0752555 018341 0752557525_Instructions_V2

If this product fails through faulty materials or workmanship, contact our . Normal wear and tear . Normal wear and tear

www.lasertools.co.ukwww.lasertools.co.ukwww.lasertools.co.uk

5 018341 075255

If this product fails through faulty materials or workmanship, contact our +44 (0) 1926 818186

If this product fails through faulty materials or workmanship, contact our +44 (0) 1926 818186

are excluded as are consumable items and abuse.

Distributed by The Tool Connection LtdDistributed by The Tool Connection Ltd

Kineton Road, Southam, Warwickshire CV47 0DR +44 (0) 1926 815888

Kineton Road, Southam, Warwickshire CV47 0DR +44 (0) 1926 815888www.toolconnection.co.ukwww.toolconnection.co.uk

www.lasertools.co.uk

If this product fails through faulty materials or workmanship, contact our

Guarantee

If this product fails through faulty materials or workmanship, contact our service department direct on: are excluded as are consumable items and abuse.service department direct on: are excluded as are consumable items and abuse.

www.lasertools.co.ukDistributed by The Tool Connection LtdDistributed by The Tool Connection Ltd

Kineton Road, Southam, Warwickshire CV47 0DRKineton Road, Southam, Warwickshire CV47 0DR +44 (0) 1926 815000

info@toolconnection.co.uk

www.lasertools.co.ukwww.lasertools.co.uk

If this product fails through faulty materials or workmanship, contact our service department direct on: are excluded as are consumable items and abuse.

www.lasertools.co.ukwww.lasertools.co.uk

www.lasertools.co.ukwww.lasertools.co.ukwww.lasertools.co.ukwww.lasertools.co.uk

Ref OEM DescriptionA Slide Hammer

B T10402 Injector Adaptor and Fixing (piezo Injector 1.6 common rail etc.)

C T10415 Injector Adaptor and Fixing (2.0L common Rail engines etc.)

Components

2 3

The following instructions are for guidance only. Please refer to OEM derived data such as the vehicles manufactures own data or Autodata.The use of this injector puller kit is purely down to the user’s discretion and Tool Connection cannot be held responsible for any damage caused what so ever.

Applications

Make Model Year TypeAudi A3 2009/2013

TDi CR Seat

Ibiza 2008Altea 2009Altea XL 2009

Altea Freetrack 2009

Leon 2009

Toledo 2013

Volkswagen Golf 2009

Engine Code1.6 TDi CR diesel2.0 TDi

InstructionsNOTE:• Before removing injector pipes and injectors ensure the

working area is clean to prevent dirt from entering the fuel system/engine cylinder.

• Block off any open pipes• Select appropriate adaptor (B or C) according to OEM

specification and assemble as shown. N.B: these instructions are for guidance only. The

Tool Connection Ltd. Strongly advises the use of OEM instructions and applications information.

Assembly of A and B

Assembly of A and C

This tool kit is made up of a pair of bolt-on injector adaptors and small slide hammer. It is designed to be used to help extract VAG Common Rail diesel injectors with the minimum of disassembly. The kit is equivalent to VAG OEM tools T10402 and T10415.(No solenoid removal required).For seized injector removal please use Laser 6263 Extractor with Air Hammer. Note: Check OEM data to confirm application.

A

BC

Before removing injector pipes and injectors ensure the Before removing injector pipes and injectors ensure the working area is clean to prevent dirt from entering the fuel Before removing injector pipes and injectors ensure the working area is clean to prevent dirt from entering the fuel Before removing injector pipes and injectors ensure the working area is clean to prevent dirt from entering the fuel working area is clean to prevent dirt from entering the fuel working area is clean to prevent dirt from entering the fuel

Select appropriate adaptor (B or C) according to OEM Select appropriate adaptor (B or C) according to OEM

Instructions

Before removing injector pipes and injectors ensure the working area is clean to prevent dirt from entering the fuel Before removing injector pipes and injectors ensure the working area is clean to prevent dirt from entering the fuel system/engine cylinder.

Select appropriate adaptor (B or C) according to OEM Select appropriate adaptor (B or C) according to OEM specification and assemble as shown.Select appropriate adaptor (B or C) according to OEM Select appropriate adaptor (B or C) according to OEM specification and assemble as shown.N.B: these instructions are for guidance only. The N.B: these instructions are for guidance only. The Tool Connection Ltd. Strongly advises the use of OEM instructions and applications information.

N.B: these instructions are for guidance only. The Tool Connection Ltd. Strongly advises the use of OEM instructions and applications information.

InstructionsNOTE:

Before removing injector pipes and injectors ensure the Before removing injector pipes and injectors ensure the working area is clean to prevent dirt from entering the fuel system/engine cylinder.system/engine cylinder.Block off any open pipesSelect appropriate adaptor (B or C) according to OEM Block off any open pipesSelect appropriate adaptor (B or C) according to OEM specification and assemble as shown.specification and assemble as shown.N.B: these instructions are for guidance only. The Tool Connection Ltd. Strongly advises the use of OEM N.B: these instructions are for guidance only. The Tool Connection Ltd. Strongly advises the use of OEM instructions and applications information.Tool Connection Ltd. Strongly advises the use of OEM instructions and applications information.Tool Connection Ltd. Strongly advises the use of OEM instructions and applications information.instructions and applications information.

This tool kit is made up of a pair of bolt-on injector adaptors This tool kit is made up of a pair of bolt-on injector adaptors and small slide hammer. It is designed to be used to help extract VAG Common Rail diesel injectors with the minimum extract VAG Common Rail diesel injectors with the minimum of disassembly. The kit is equivalent to VAG OEM tools T10402 of disassembly. The kit is equivalent to VAG OEM tools T10402

• Block off any open pipes• Select appropriate adaptor (B or C) according to OEM

specification and assemble as shown.specification and assemble as shown.N.B: these instructions are for guidance only. The Tool Connection Ltd. Strongly advises the use of OEM N.B: these instructions are for guidance only. The Tool Connection Ltd. Strongly advises the use of OEM instructions and applications information.instructions and applications information.

Assembly of A and BAssembly of A and B

This tool kit is made up of a pair of bolt-on injector adaptors and small slide hammer. It is designed to be used to help extract VAG Common Rail diesel injectors with the minimum and small slide hammer. It is designed to be used to help extract VAG Common Rail diesel injectors with the minimum of disassembly. The kit is equivalent to VAG OEM tools T10402 of disassembly. The kit is equivalent to VAG OEM tools T10402

For seized injector removal please use Laser 6263 Extractor

Assembly of A and BAssembly of A and BAssembly of A and B

ComponentsComponentsThis tool kit is made up of a pair of bolt-on injector adaptors This tool kit is made up of a pair of bolt-on injector adaptors and small slide hammer. It is designed to be used to help extract VAG Common Rail diesel injectors with the minimum and small slide hammer. It is designed to be used to help extract VAG Common Rail diesel injectors with the minimum of disassembly. The kit is equivalent to VAG OEM tools T10402 extract VAG Common Rail diesel injectors with the minimum of disassembly. The kit is equivalent to VAG OEM tools T10402

(No solenoid removal required).For seized injector removal please use Laser 6263 Extractor For seized injector removal please use Laser 6263 Extractor For seized injector removal please use Laser 6263 Extractor

Note: Check OEM data to confirm application.Note: Check OEM data to confirm application.

ComponentsThis tool kit is made up of a pair of bolt-on injector adaptors This tool kit is made up of a pair of bolt-on injector adaptors and small slide hammer. It is designed to be used to help extract VAG Common Rail diesel injectors with the minimum and small slide hammer. It is designed to be used to help extract VAG Common Rail diesel injectors with the minimum of disassembly. The kit is equivalent to VAG OEM tools T10402 of disassembly. The kit is equivalent to VAG OEM tools T10402 and T10415.(No solenoid removal required).(No solenoid removal required).For seized injector removal please use Laser 6263 Extractor

Note: Check OEM data to confirm application.

(No solenoid removal required).For seized injector removal please use Laser 6263 Extractor For seized injector removal please use Laser 6263 Extractor with Air Hammer. with Air Hammer. Note: Check OEM data to confirm application.Note: Check OEM data to confirm application.

A

CB

DescriptionSlide Hammer Injector Adaptor and FixingInjector Adaptor and Fixing(piezo Injector 1.6 common rail etc.)Injector Adaptor and Fixing(piezo Injector 1.6 common rail etc.)(piezo Injector 1.6 common rail etc.)Injector Adaptor and Fixing(2.0L common Rail engines etc.)

(piezo Injector 1.6 common rail etc.)(piezo Injector 1.6 common rail etc.)

(2.0L common Rail engines etc.)

Assembly of A and C Assembly of A and C

DescriptionSlide Hammer Slide Hammer Injector Adaptor and FixingInjector Adaptor and Fixing(piezo Injector 1.6 common rail etc.)(piezo Injector 1.6 common rail etc.)Injector Adaptor and Fixing(piezo Injector 1.6 common rail etc.)(piezo Injector 1.6 common rail etc.)Injector Adaptor and Fixing(2.0L common Rail engines etc.)Injector Adaptor and Fixing(2.0L common Rail engines etc.)Injector Adaptor and Fixing(2.0L common Rail engines etc.)(2.0L common Rail engines etc.)(2.0L common Rail engines etc.)(2.0L common Rail engines etc.)

Type

Assembly of A and C

3

Ref OEM

T10402T10402

Year 2009/2013

Year 2009/2013

TDi CRTDi CR

B

C

ApplicationsApplicationsApplications

Model A3Ibiza

200920092009

2009

2009

Audi

AlteaAltea XL

Altea FreetrackAltea Freetrack

Leon

Toledo 2013

Code

The following instructions are for guidance only. Please refer to OEM derived data such as the vehicles manufactures own data OEM derived data such as the vehicles manufactures own data

The use of this injector puller kit is purely down to the user’s The use of this injector puller kit is purely down to the user’s discretion and Tool Connection cannot be held responsible for

SeatSeat

VolkswagenVolkswagen GolfGolf

TDi CR diesel

The following instructions are for guidance only. Please refer to The following instructions are for guidance only. Please refer to OEM derived data such as the vehicles manufactures own data OEM derived data such as the vehicles manufactures own data

The use of this injector puller kit is purely down to the user’s discretion and Tool Connection cannot be held responsible for discretion and Tool Connection cannot be held responsible for

Engine1.61.62.0

The following instructions are for guidance only. Please refer to The following instructions are for guidance only. Please refer to OEM derived data such as the vehicles manufactures own data OEM derived data such as the vehicles manufactures own data

The use of this injector puller kit is purely down to the user’s The use of this injector puller kit is purely down to the user’s discretion and Tool Connection cannot be held responsible for discretion and Tool Connection cannot be held responsible for any damage caused what so ever.

The following instructions are for guidance only. Please refer to The following instructions are for guidance only. Please refer to OEM derived data such as the vehicles manufactures own data or Autodata.The use of this injector puller kit is purely down to the user’s The use of this injector puller kit is purely down to the user’s discretion and Tool Connection cannot be held responsible for any damage caused what so ever.discretion and Tool Connection cannot be held responsible for any damage caused what so ever.